diff options
Diffstat (limited to 'drivers/gpu/mali400/r3p2/mali/common/mali_gp.c')
| -rw-r--r-- | drivers/gpu/mali400/r3p2/mali/common/mali_gp.c | 364 |
1 files changed, 364 insertions, 0 deletions
diff --git a/drivers/gpu/mali400/r3p2/mali/common/mali_gp.c b/drivers/gpu/mali400/r3p2/mali/common/mali_gp.c new file mode 100644 index 0000000..c2b01f9 --- /dev/null +++ b/drivers/gpu/mali400/r3p2/mali/common/mali_gp.c @@ -0,0 +1,364 @@ +/* + * Copyright (C) 2011-2012 ARM Limited. All rights reserved. + * + * This program is free software and is provided to you under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation, and any use by you of this program is subject to the terms of such GNU licence. + * + * A copy of the licence is included with the program, and can also be obtained from Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include "mali_gp.h" +#include "mali_hw_core.h" +#include "mali_group.h" +#include "mali_osk.h" +#include "regs/mali_gp_regs.h" +#include "mali_kernel_common.h" +#include "mali_kernel_core.h" +#if defined(CONFIG_MALI400_PROFILING) +#include "mali_osk_profiling.h" +#endif + +static struct mali_gp_core *mali_global_gp_core = NULL; + +/* Interrupt handlers */ +static void mali_gp_irq_probe_trigger(void *data); +static _mali_osk_errcode_t mali_gp_irq_probe_ack(void *data); + +struct mali_gp_core *mali_gp_create(const _mali_osk_resource_t * resource, struct mali_group *group) +{ + struct mali_gp_core* core = NULL; + + MALI_DEBUG_ASSERT(NULL == mali_global_gp_core); + MALI_DEBUG_PRINT(2, ("Mali GP: Creating Mali GP core: %s\n", resource->description)); + + core = _mali_osk_malloc(sizeof(struct mali_gp_core)); + if (NULL != core) + { + core->counter_src0_used = MALI_HW_CORE_NO_COUNTER; + core->counter_src1_used = MALI_HW_CORE_NO_COUNTER; + if (_MALI_OSK_ERR_OK == mali_hw_core_create(&core->hw_core, resource, MALIGP2_REGISTER_ADDRESS_SPACE_SIZE)) + { + _mali_osk_errcode_t ret; + + ret = mali_gp_reset(core); + + if (_MALI_OSK_ERR_OK == ret) + { + ret = mali_group_add_gp_core(group, core); + if (_MALI_OSK_ERR_OK == ret) + { + /* Setup IRQ handlers (which will do IRQ probing if needed) */ + core->irq = _mali_osk_irq_init(resource->irq, + mali_group_upper_half_gp, + group, + mali_gp_irq_probe_trigger, + mali_gp_irq_probe_ack, + core, + "mali_gp_irq_handlers"); + if (NULL != core->irq) + { + MALI_DEBUG_PRINT(4, ("Mali GP: set global gp core from 0x%08X to 0x%08X\n", mali_global_gp_core, core)); + mali_global_gp_core = core; + + return core; + } + else + { + MALI_PRINT_ERROR(("Mali GP: Failed to setup interrupt handlers for GP core %s\n", core->hw_core.description)); + } + mali_group_remove_gp_core(group); + } + else + { + MALI_PRINT_ERROR(("Mali GP: Failed to add core %s to group\n", core->hw_core.description)); + } + } + mali_hw_core_delete(&core->hw_core); + } + + _mali_osk_free(core); + } + else + { + MALI_PRINT_ERROR(("Failed to allocate memory for GP core\n")); + } + + return NULL; +} + +void mali_gp_delete(struct mali_gp_core *core) +{ + MALI_DEBUG_ASSERT_POINTER(core); + + _mali_osk_irq_term(core->irq); + mali_hw_core_delete(&core->hw_core); + mali_global_gp_core = NULL; + _mali_osk_free(core); +} + +void mali_gp_stop_bus(struct mali_gp_core *core) +{ + MALI_DEBUG_ASSERT_POINTER(core); + + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_CMD, MALIGP2_REG_VAL_CMD_STOP_BUS); +} + +_mali_osk_errcode_t mali_gp_stop_bus_wait(struct mali_gp_core *core) +{ + int i; + + MALI_DEBUG_ASSERT_POINTER(core); + + /* Send the stop bus command. */ + mali_gp_stop_bus(core); + + /* Wait for bus to be stopped */ + for (i = 0; i < MALI_REG_POLL_COUNT_FAST; i++) + { + if (mali_hw_core_register_read(&core->hw_core, MALIGP2_REG_ADDR_MGMT_STATUS) & MALIGP2_REG_VAL_STATUS_BUS_STOPPED) + { + break; + } + } + + if (MALI_REG_POLL_COUNT_FAST == i) + { + MALI_PRINT_ERROR(("Mali GP: Failed to stop bus on %s\n", core->hw_core.description)); + return _MALI_OSK_ERR_FAULT; + } + return _MALI_OSK_ERR_OK; +} + +void mali_gp_hard_reset(struct mali_gp_core *core) +{ + const u32 reset_wait_target_register = MALIGP2_REG_ADDR_MGMT_WRITE_BOUND_LOW; + const u32 reset_invalid_value = 0xC0FFE000; + const u32 reset_check_value = 0xC01A0000; + const u32 reset_default_value = 0; + int i; + + MALI_DEBUG_ASSERT_POINTER(core); + MALI_DEBUG_PRINT(4, ("Mali GP: Hard reset of core %s\n", core->hw_core.description)); + + mali_hw_core_register_write(&core->hw_core, reset_wait_target_register, reset_invalid_value); + + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_CMD, MALIGP2_REG_VAL_CMD_RESET); + + for (i = 0; i < MALI_REG_POLL_COUNT_FAST; i++) + { + mali_hw_core_register_write(&core->hw_core, reset_wait_target_register, reset_check_value); + if (reset_check_value == mali_hw_core_register_read(&core->hw_core, reset_wait_target_register)) + { + break; + } + } + + if (MALI_REG_POLL_COUNT_FAST == i) + { + MALI_PRINT_ERROR(("Mali GP: The hard reset loop didn't work, unable to recover\n")); + } + + mali_hw_core_register_write(&core->hw_core, reset_wait_target_register, reset_default_value); /* set it back to the default */ + /* Re-enable interrupts */ + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_INT_CLEAR, MALIGP2_REG_VAL_IRQ_MASK_ALL); + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_INT_MASK, MALIGP2_REG_VAL_IRQ_MASK_USED); + +} + +void mali_gp_reset_async(struct mali_gp_core *core) +{ + MALI_DEBUG_ASSERT_POINTER(core); + + MALI_DEBUG_PRINT(4, ("Mali GP: Reset of core %s\n", core->hw_core.description)); + + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_INT_MASK, 0); /* disable the IRQs */ + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_INT_CLEAR, MALI400GP_REG_VAL_IRQ_RESET_COMPLETED); + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_CMD, MALI400GP_REG_VAL_CMD_SOFT_RESET); + +} + +_mali_osk_errcode_t mali_gp_reset_wait(struct mali_gp_core *core) +{ + int i; + u32 rawstat = 0; + + MALI_DEBUG_ASSERT_POINTER(core); + + for (i = 0; i < MALI_REG_POLL_COUNT_FAST; i++) + { + rawstat = mali_hw_core_register_read(&core->hw_core, MALIGP2_REG_ADDR_MGMT_INT_RAWSTAT); + if (rawstat & MALI400GP_REG_VAL_IRQ_RESET_COMPLETED) + { + break; + } + } + + if (i == MALI_REG_POLL_COUNT_FAST) + { + MALI_PRINT_ERROR(("Mali GP: Failed to reset core %s, rawstat: 0x%08x\n", + core->hw_core.description, rawstat)); + return _MALI_OSK_ERR_FAULT; + } + + /* Re-enable interrupts */ + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_INT_CLEAR, MALIGP2_REG_VAL_IRQ_MASK_ALL); + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_INT_MASK, MALIGP2_REG_VAL_IRQ_MASK_USED); + + return _MALI_OSK_ERR_OK; +} + +_mali_osk_errcode_t mali_gp_reset(struct mali_gp_core *core) +{ + mali_gp_reset_async(core); + return mali_gp_reset_wait(core); +} + +void mali_gp_job_start(struct mali_gp_core *core, struct mali_gp_job *job) +{ + u32 startcmd = 0; + u32 *frame_registers = mali_gp_job_get_frame_registers(job); + + core->counter_src0_used = mali_gp_job_get_perf_counter_src0(job); + core->counter_src1_used = mali_gp_job_get_perf_counter_src1(job); + + MALI_DEBUG_ASSERT_POINTER(core); + + if (mali_gp_job_has_vs_job(job)) + { + startcmd |= (u32) MALIGP2_REG_VAL_CMD_START_VS; + } + + if (mali_gp_job_has_plbu_job(job)) + { + startcmd |= (u32) MALIGP2_REG_VAL_CMD_START_PLBU; + } + + MALI_DEBUG_ASSERT(0 != startcmd); + + mali_hw_core_register_write_array_relaxed(&core->hw_core, MALIGP2_REG_ADDR_MGMT_VSCL_START_ADDR, frame_registers, MALIGP2_NUM_REGS_FRAME); + + if (MALI_HW_CORE_NO_COUNTER != core->counter_src0_used) + { + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_PERF_CNT_0_SRC, core->counter_src0_used); + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_PERF_CNT_0_ENABLE, MALIGP2_REG_VAL_PERF_CNT_ENABLE); + } + if (MALI_HW_CORE_NO_COUNTER != core->counter_src1_used) + { + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_PERF_CNT_1_SRC, core->counter_src1_used); + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_PERF_CNT_1_ENABLE, MALIGP2_REG_VAL_PERF_CNT_ENABLE); + } + + MALI_DEBUG_PRINT(3, ("Mali GP: Starting job (0x%08x) on core %s with command 0x%08X\n", job, core->hw_core.description, startcmd)); + + /* Barrier to make sure the previous register write is finished */ + _mali_osk_write_mem_barrier(); + + /* This is the command that starts the core. */ + mali_hw_core_register_write_relaxed(&core->hw_core, MALIGP2_REG_ADDR_MGMT_CMD, startcmd); + + /* Barrier to make sure the previous register write is finished */ + _mali_osk_write_mem_barrier(); +} + +void mali_gp_resume_with_new_heap(struct mali_gp_core *core, u32 start_addr, u32 end_addr) +{ + u32 irq_readout; + + MALI_DEBUG_ASSERT_POINTER(core); + + irq_readout = mali_hw_core_register_read(&core->hw_core, MALIGP2_REG_ADDR_MGMT_INT_RAWSTAT); + + if (irq_readout & MALIGP2_REG_VAL_IRQ_PLBU_OUT_OF_MEM) + { + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_INT_CLEAR, (MALIGP2_REG_VAL_IRQ_PLBU_OUT_OF_MEM | MALIGP2_REG_VAL_IRQ_HANG)); + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_INT_MASK, MALIGP2_REG_VAL_IRQ_MASK_USED); /* re-enable interrupts */ + mali_hw_core_register_write_relaxed(&core->hw_core, MALIGP2_REG_ADDR_MGMT_PLBU_ALLOC_START_ADDR, start_addr); + mali_hw_core_register_write_relaxed(&core->hw_core, MALIGP2_REG_ADDR_MGMT_PLBU_ALLOC_END_ADDR, end_addr); + + MALI_DEBUG_PRINT(3, ("Mali GP: Resuming job\n")); + + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_CMD, MALIGP2_REG_VAL_CMD_UPDATE_PLBU_ALLOC); + _mali_osk_write_mem_barrier(); + } + /* + * else: core has been reset between PLBU_OUT_OF_MEM interrupt and this new heap response. + * A timeout or a page fault on Mali-200 PP core can cause this behaviour. + */ +} + +u32 mali_gp_core_get_version(struct mali_gp_core *core) +{ + MALI_DEBUG_ASSERT_POINTER(core); + return mali_hw_core_register_read(&core->hw_core, MALIGP2_REG_ADDR_MGMT_VERSION); +} + +struct mali_gp_core *mali_gp_get_global_gp_core(void) +{ + return mali_global_gp_core; +} + +/* ------------- interrupt handling below ------------------ */ +static void mali_gp_irq_probe_trigger(void *data) +{ + struct mali_gp_core *core = (struct mali_gp_core *)data; + + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_INT_MASK, MALIGP2_REG_VAL_IRQ_MASK_USED); + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_INT_RAWSTAT, MALIGP2_REG_VAL_CMD_FORCE_HANG); + _mali_osk_mem_barrier(); +} + +static _mali_osk_errcode_t mali_gp_irq_probe_ack(void *data) +{ + struct mali_gp_core *core = (struct mali_gp_core *)data; + u32 irq_readout; + + irq_readout = mali_hw_core_register_read(&core->hw_core, MALIGP2_REG_ADDR_MGMT_INT_STAT); + if (MALIGP2_REG_VAL_IRQ_FORCE_HANG & irq_readout) + { + mali_hw_core_register_write(&core->hw_core, MALIGP2_REG_ADDR_MGMT_INT_CLEAR, MALIGP2_REG_VAL_IRQ_FORCE_HANG); + _mali_osk_mem_barrier(); + return _MALI_OSK_ERR_OK; + } + + return _MALI_OSK_ERR_FAULT; +} + +/* ------ local helper functions below --------- */ +#if MALI_STATE_TRACKING +u32 mali_gp_dump_state(struct mali_gp_core *core, char *buf, u32 size) +{ + int n = 0; + + n += _mali_osk_snprintf(buf + n, size - n, "\tGP: %s\n", core->hw_core.description); + + return n; +} +#endif + +void mali_gp_update_performance_counters(struct mali_gp_core *core, struct mali_gp_job *job, mali_bool suspend) +{ + u32 val0 = 0; + u32 val1 = 0; + + if (MALI_HW_CORE_NO_COUNTER != core->counter_src0_used) + { + val0 = mali_hw_core_register_read(&core->hw_core, MALIGP2_REG_ADDR_MGMT_PERF_CNT_0_VALUE); + mali_gp_job_set_perf_counter_value0(job, val0); + +#if defined(CONFIG_MALI400_PROFILING) + _mali_osk_profiling_report_hw_counter(COUNTER_VP_0_C0, val0); +#endif + + } + + if (MALI_HW_CORE_NO_COUNTER != core->counter_src1_used) + { + val1 = mali_hw_core_register_read(&core->hw_core, MALIGP2_REG_ADDR_MGMT_PERF_CNT_1_VALUE); + mali_gp_job_set_perf_counter_value1(job, val1); + +#if defined(CONFIG_MALI400_PROFILING) + _mali_osk_profiling_report_hw_counter(COUNTER_VP_0_C1, val1); +#endif + } +} |