diff options
Diffstat (limited to 'drivers/ide/cmd64x.c')
| -rw-r--r-- | drivers/ide/cmd64x.c | 88 |
1 files changed, 29 insertions, 59 deletions
diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c index f2500c8..5c5dd90 100644 --- a/drivers/ide/cmd64x.c +++ b/drivers/ide/cmd64x.c @@ -7,6 +7,7 @@ * Copyright (C) 1998 David S. Miller (davem@redhat.com) * * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz * Copyright (C) 2007,2009 MontaVista Software, Inc. <source@mvista.com> */ @@ -50,72 +51,45 @@ #define UDIDETCR1 0x7B #define DTPR1 0x7C -static u8 quantize_timing(int timing, int quant) -{ - return (timing + quant - 1) / quant; -} - -/* - * This routine calculates active/recovery counts and then writes them into - * the chipset registers. - */ -static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time) +static void cmd64x_program_timings(ide_drive_t *drive, u8 mode) { + ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33); - u8 cycle_count, active_count, recovery_count, drwtim; + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; + const unsigned long T = 1000000 / bus_speed; static const u8 recovery_values[] = {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; + static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; + static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3}; + struct ide_timing t; + u8 arttim = 0; - cycle_count = quantize_timing( cycle_time, clock_time); - active_count = quantize_timing(active_time, clock_time); - recovery_count = cycle_count - active_count; + ide_timing_compute(drive, mode, &t, T, 0); /* * In case we've got too long recovery phase, try to lengthen * the active phase */ - if (recovery_count > 16) { - active_count += recovery_count - 16; - recovery_count = 16; + if (t.recover > 16) { + t.active += t.recover - 16; + t.recover = 16; } - if (active_count > 16) /* shouldn't actually happen... */ - active_count = 16; + if (t.active > 16) /* shouldn't actually happen... */ + t.active = 16; /* * Convert values to internal chipset representation */ - recovery_count = recovery_values[recovery_count]; - active_count &= 0x0f; + t.recover = recovery_values[t.recover]; + t.active &= 0x0f; /* Program the active/recovery counts into the DRWTIM register */ - drwtim = (active_count << 4) | recovery_count; - (void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim); -} + pci_write_config_byte(dev, drwtim_regs[drive->dn], + (t.active << 4) | t.recover); -/* - * This routine writes into the chipset registers - * PIO setup/active/recovery timings. - */ -static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); - unsigned long setup_count; - unsigned int cycle_time; - u8 arttim = 0; - - static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; - static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; - - cycle_time = ide_pio_cycle_time(drive, pio); - - program_cycle_times(drive, cycle_time, t->active); - - setup_count = quantize_timing(t->setup, - 1000 / (ide_pci_clk ? ide_pci_clk : 33)); + if (mode >= XFER_SW_DMA_0) + return; /* * The primary channel has individual address setup timing registers @@ -126,15 +100,15 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) if (hwif->channel) { ide_drive_t *pair = ide_get_pair_dev(drive); - ide_set_drivedata(drive, (void *)setup_count); + ide_set_drivedata(drive, (void *)(unsigned long)t.setup); if (pair) - setup_count = max_t(u8, setup_count, + t.setup = max_t(u8, t.setup, (unsigned long)ide_get_drivedata(pair)); } - if (setup_count > 5) /* shouldn't actually happen... */ - setup_count = 5; + if (t.setup > 5) /* shouldn't actually happen... */ + t.setup = 5; /* * Program the address setup clocks into the ARTTIM registers. @@ -144,7 +118,7 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) if (hwif->channel) arttim &= ~ARTTIM23_INTR_CH1; arttim &= ~0xc0; - arttim |= setup_values[setup_count]; + arttim |= setup_values[t.setup]; (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim); } @@ -162,7 +136,7 @@ static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio) if (pio == 8 || pio == 9) return; - cmd64x_tune_pio(drive, pio); + cmd64x_program_timings(drive, XFER_PIO_0 + pio); } static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) @@ -197,13 +171,9 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) regU |= unit ? 0xC2 : 0x31; break; case XFER_MW_DMA_2: - program_cycle_times(drive, 120, 70); - break; case XFER_MW_DMA_1: - program_cycle_times(drive, 150, 80); - break; case XFER_MW_DMA_0: - program_cycle_times(drive, 480, 215); + cmd64x_program_timings(drive, speed); break; } @@ -471,6 +441,6 @@ static void __exit cmd64x_ide_exit(void) module_init(cmd64x_ide_init); module_exit(cmd64x_ide_exit); -MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick"); +MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("PCI driver module for CMD64x IDE"); MODULE_LICENSE("GPL"); |