diff options
Diffstat (limited to 'drivers/ide/pci/alim15x3.c')
-rw-r--r-- | drivers/ide/pci/alim15x3.c | 109 |
1 files changed, 54 insertions, 55 deletions
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 8ee2b48..a607dd3 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/alim15x3.c Version 0.27 Aug 27 2007 + * linux/drivers/ide/pci/alim15x3.c Version 0.29 Sep 16 2007 * * Copyright (C) 1998-2000 Michel Aubry, Maintainer * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer @@ -492,6 +492,13 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c * clear bit 7 */ pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F); + /* + * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010 + */ + if (m5229_revision >= 0x20 && isa_dev) { + pci_read_config_byte(isa_dev, 0x5e, &tmpbyte); + chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0; + } goto out; } @@ -537,7 +544,30 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02); } } + out: + /* + * CD_ROM DMA on (m5229, 0x53, bit0) + * Enable this bit even if we want to use PIO. + * PIO FIFO off (m5229, 0x53, bit1) + * The hardware will use 0x54h and 0x55h to control PIO FIFO. + * (Not on later devices it seems) + * + * 0x53 changes meaning on later revs - we must no touch + * bit 1 on them. Need to check if 0x20 is the right break. + */ + if (m5229_revision >= 0x20) { + pci_read_config_byte(dev, 0x53, &tmpbyte); + + if (m5229_revision <= 0x20) + tmpbyte = (tmpbyte & (~0x02)) | 0x01; + else if (m5229_revision == 0xc7 || m5229_revision == 0xc8) + tmpbyte |= 0x03; + else + tmpbyte |= 0x01; + + pci_write_config_byte(dev, 0x53, tmpbyte); + } pci_dev_put(north); pci_dev_put(isa_dev); local_irq_restore(flags); @@ -616,36 +646,8 @@ static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif) if ((tmpbyte & (1 << hwif->channel)) == 0) cbl = ATA_CBL_PATA80; } - } else { - /* - * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010 - */ - pci_read_config_byte(isa_dev, 0x5e, &tmpbyte); - chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0; } - /* - * CD_ROM DMA on (m5229, 0x53, bit0) - * Enable this bit even if we want to use PIO - * PIO FIFO off (m5229, 0x53, bit1) - * The hardware will use 0x54h and 0x55h to control PIO FIFO - * (Not on later devices it seems) - * - * 0x53 changes meaning on later revs - we must no touch - * bit 1 on them. Need to check if 0x20 is the right break - */ - - pci_read_config_byte(dev, 0x53, &tmpbyte); - - if(m5229_revision <= 0x20) - tmpbyte = (tmpbyte & (~0x02)) | 0x01; - else if (m5229_revision == 0xc7 || m5229_revision == 0xc8) - tmpbyte |= 0x03; - else - tmpbyte |= 0x01; - - pci_write_config_byte(dev, 0x53, tmpbyte); - local_irq_restore(flags); return cbl; @@ -664,31 +666,9 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif) hwif->set_dma_mode = &ali_set_dma_mode; hwif->udma_filter = &ali_udma_filter; - /* don't use LBA48 DMA on ALi devices before rev 0xC5 */ - if (m5229_revision <= 0xC4) - hwif->host_flags |= IDE_HFLAG_NO_LBA48_DMA; - if (hwif->dma_base == 0) return; - /* - * check in ->init_dma guarantees m5229_revision >= 0x20 here - */ - - if (m5229_revision == 0x20) - hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA; - - if (m5229_revision <= 0x20) - hwif->ultra_mask = 0x00; /* no udma */ - else if (m5229_revision < 0xC2) - hwif->ultra_mask = ATA_UDMA2; - else if (m5229_revision == 0xC2 || m5229_revision == 0xC3) - hwif->ultra_mask = ATA_UDMA4; - else if (m5229_revision == 0xC4) - hwif->ultra_mask = ATA_UDMA5; - else - hwif->ultra_mask = ATA_UDMA6; - hwif->dma_setup = &ali15x3_dma_setup; if (hwif->cbl != ATA_CBL_PATA40_SHORT) @@ -766,7 +746,7 @@ static void __devinit init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase) ide_setup_dma(hwif, dmabase, 8); } -static ide_pci_device_t ali15x3_chipset __devinitdata = { +static const struct ide_port_info ali15x3_chipset __devinitdata = { .name = "ALI15X3", .init_chipset = init_chipset_ali15x3, .init_hwif = init_hwif_ali15x3, @@ -792,15 +772,34 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev { }, }; - ide_pci_device_t *d = &ali15x3_chipset; + struct ide_port_info d = ali15x3_chipset; + u8 rev = dev->revision; if (pci_dev_present(ati_rs100)) printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n"); + /* don't use LBA48 DMA on ALi devices before rev 0xC5 */ + if (rev <= 0xC4) + d.host_flags |= IDE_HFLAG_NO_LBA48_DMA; + + if (rev >= 0x20) { + if (rev == 0x20) + d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA; + + if (rev < 0xC2) + d.udma_mask = ATA_UDMA2; + else if (rev == 0xC2 || rev == 0xC3) + d.udma_mask = ATA_UDMA4; + else if (rev == 0xC4) + d.udma_mask = ATA_UDMA5; + else + d.udma_mask = ATA_UDMA6; + } + #if defined(CONFIG_SPARC64) - d->init_hwif = init_hwif_common_ali15x3; + d.init_hwif = init_hwif_common_ali15x3; #endif /* CONFIG_SPARC64 */ - return ide_setup_pci_device(dev, d); + return ide_setup_pci_device(dev, &d); } |