diff options
Diffstat (limited to 'drivers/ide')
34 files changed, 103 insertions, 55 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 9827c5e..5a26584 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -327,7 +327,7 @@ config BLK_DEV_OPTI621 select BLK_DEV_IDEPCI help This is a driver for the OPTi 82C621 EIDE controller. - Please read the comments at the top of <file:drivers/ide/pci/opti621.c>. + Please read the comments at the top of <file:drivers/ide/opti621.c>. config BLK_DEV_RZ1000 tristate "RZ1000 chipset bugfix/support" @@ -365,7 +365,7 @@ config BLK_DEV_ALI15X3 normal dual channel support. Please read the comments at the top of - <file:drivers/ide/pci/alim15x3.c>. + <file:drivers/ide/alim15x3.c>. If unsure, say N. @@ -528,7 +528,7 @@ config BLK_DEV_NS87415 This driver adds detection and support for the NS87415 chip (used mainly on SPARC64 and PA-RISC machines). - Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>. + Please read the comments at the top of <file:drivers/ide/ns87415.c>. config BLK_DEV_PDC202XX_OLD tristate "PROMISE PDC202{46|62|65|67} support" @@ -547,7 +547,7 @@ config BLK_DEV_PDC202XX_OLD for more than one card. Please read the comments at the top of - <file:drivers/ide/pci/pdc202xx_old.c>. + <file:drivers/ide/pdc202xx_old.c>. If unsure, say N. @@ -593,7 +593,7 @@ config BLK_DEV_SIS5513 ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740, SiS745, SiS750 - Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>. + Please read the comments at the top of <file:drivers/ide/sis5513.c>. config BLK_DEV_SL82C105 tristate "Winbond SL82c105 support" @@ -616,7 +616,7 @@ config BLK_DEV_SLC90E66 look-a-like to the PIIX4 it should be a nice addition. Please read the comments at the top of - <file:drivers/ide/pci/slc90e66.c>. + <file:drivers/ide/slc90e66.c>. config BLK_DEV_TRM290 tristate "Tekram TRM290 chipset support" @@ -625,7 +625,7 @@ config BLK_DEV_TRM290 This driver adds support for bus master DMA transfers using the Tekram TRM290 PCI IDE chip. Volunteers are needed for further tweaking and development. - Please read the comments at the top of <file:drivers/ide/pci/trm290.c>. + Please read the comments at the top of <file:drivers/ide/trm290.c>. config BLK_DEV_VIA82CXXX tristate "VIA82CXXX chipset support" @@ -677,19 +677,19 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" - depends on SOC_AU1200 + depends on MIPS_ALCHEMY select IDE_XFER_MODE choice prompt "IDE Mode for AMD Alchemy Au1200" - default CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX + default BLK_DEV_IDE_AU1XXX_PIO_DBDMA + depends on BLK_DEV_IDE_AU1XXX config BLK_DEV_IDE_AU1XXX_PIO_DBDMA bool "PIO+DbDMA IDE for AMD Alchemy Au1200" config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200" - depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX + depends on BLK_DEV_IDE_AU1XXX endchoice config BLK_DEV_IDE_TX4938 @@ -836,7 +836,7 @@ config BLK_DEV_ALI14XX of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster I/O speeds to be set as well. See the files <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/ali14xx.c> for more info. + <file:drivers/ide/ali14xx.c> for more info. config BLK_DEV_DTC2278 tristate "DTC-2278 support" @@ -847,7 +847,7 @@ config BLK_DEV_DTC2278 boot parameter. It enables support for the secondary IDE interface of the DTC-2278 card, and permits faster I/O speeds to be set as well. See the <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/dtc2278.c> files for more info. + <file:drivers/ide/dtc2278.c> files for more info. config BLK_DEV_HT6560B tristate "Holtek HT6560B support" @@ -858,7 +858,7 @@ config BLK_DEV_HT6560B boot parameter. It enables support for the secondary IDE interface of the Holtek card, and permits faster I/O speeds to be set as well. See the <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/ht6560b.c> files for more info. + <file:drivers/ide/ht6560b.c> files for more info. config BLK_DEV_QD65XX tristate "QDI QD65xx support" @@ -867,7 +867,7 @@ config BLK_DEV_QD65XX help This driver is enabled at runtime using the "qd65xx.probe" kernel boot parameter. It permits faster I/O speeds to be set. See the - <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> + <file:Documentation/ide/ide.txt> and <file:drivers/ide/qd65xx.c> for more info. config BLK_DEV_UMC8672 @@ -879,7 +879,7 @@ config BLK_DEV_UMC8672 boot parameter. It enables support for the secondary IDE interface of the UMC-8672, and permits faster I/O speeds to be set as well. See the files <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/umc8672.c> for more info. + <file:drivers/ide/umc8672.c> for more info. endif diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c index 000a78e..6dede8f 100644 --- a/drivers/ide/at91_ide.c +++ b/drivers/ide/at91_ide.c @@ -28,7 +28,7 @@ #include <linux/platform_device.h> #include <mach/board.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <mach/at91sam9_smc.h> #define DRV_NAME "at91_ide" diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c index b26c234..259786c 100644 --- a/drivers/ide/au1xxx-ide.c +++ b/drivers/ide/au1xxx-ide.c @@ -36,13 +36,17 @@ #include <linux/ide.h> #include <linux/scatterlist.h> -#include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-au1x00/au1xxx_ide.h> #define DRV_NAME "au1200-ide" #define DRV_AUTHOR "Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>" +#ifndef IDE_REG_SHIFT +#define IDE_REG_SHIFT 5 +#endif + /* enable the burstmode in the dbdma */ #define IDE_AU1XXX_BURSTMODE 1 @@ -317,10 +321,11 @@ static void auide_ddma_rx_callback(int irq, void *param) } #endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ -static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags) +static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, + u32 devwidth, u32 flags, u32 regbase) { dev->dev_id = dev_id; - dev->dev_physaddr = (u32)IDE_PHYS_ADDR; + dev->dev_physaddr = CPHYSADDR(regbase); dev->dev_intlevel = 0; dev->dev_intpolarity = 0; dev->dev_tsize = tsize; @@ -344,7 +349,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) dbdev_tab_t source_dev_tab, target_dev_tab; u32 dev_id, tsize, devwidth, flags; - dev_id = IDE_DDMA_REQ; + dev_id = hwif->ddma_id; tsize = 8; /* 1 */ devwidth = 32; /* 16 */ @@ -356,20 +361,17 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) #endif /* setup dev_tab for tx channel */ - auide_init_dbdma_dev( &source_dev_tab, - dev_id, - tsize, devwidth, DEV_FLAGS_OUT | flags); + auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth, + DEV_FLAGS_OUT | flags, auide->regbase); auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); - auide_init_dbdma_dev( &source_dev_tab, - dev_id, - tsize, devwidth, DEV_FLAGS_IN | flags); + auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth, + DEV_FLAGS_IN | flags, auide->regbase); auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); /* We also need to add a target device for the DMA */ - auide_init_dbdma_dev( &target_dev_tab, - (u32)DSCR_CMD0_ALWAYS, - tsize, devwidth, DEV_FLAGS_ANYUSE); + auide_init_dbdma_dev(&target_dev_tab, (u32)DSCR_CMD0_ALWAYS, tsize, + devwidth, DEV_FLAGS_ANYUSE, auide->regbase); auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab); /* Get a channel for TX */ @@ -411,14 +413,12 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) #endif /* setup dev_tab for tx channel */ - auide_init_dbdma_dev( &source_dev_tab, - (u32)DSCR_CMD0_ALWAYS, - 8, 32, DEV_FLAGS_OUT | flags); + auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32, + DEV_FLAGS_OUT | flags, auide->regbase); auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); - auide_init_dbdma_dev( &source_dev_tab, - (u32)DSCR_CMD0_ALWAYS, - 8, 32, DEV_FLAGS_IN | flags); + auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32, + DEV_FLAGS_IN | flags, auide->regbase); auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); /* Get a channel for TX */ @@ -540,6 +540,14 @@ static int au_ide_probe(struct platform_device *dev) goto out; } + res = platform_get_resource(dev, IORESOURCE_DMA, 0); + if (!res) { + pr_debug("%s: no DDMA ID resource\n", DRV_NAME); + ret = -ENODEV; + goto out; + } + ahwif->ddma_id = res->start; + memset(&hw, 0, sizeof(hw)); auide_setup_ports(&hw, ahwif); hw.irq = ahwif->irq; diff --git a/drivers/ide/buddha.c b/drivers/ide/buddha.c index ab4f169..b1d3859 100644 --- a/drivers/ide/buddha.c +++ b/drivers/ide/buddha.c @@ -23,6 +23,7 @@ #include <linux/zorro.h> #include <linux/ide.h> #include <linux/init.h> +#include <linux/module.h> #include <asm/amigahw.h> #include <asm/amigaints.h> diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c index cb10201..a81bd75 100644 --- a/drivers/ide/cmd640.c +++ b/drivers/ide/cmd640.c @@ -105,6 +105,7 @@ #include <linux/delay.h> #include <linux/ide.h> #include <linux/init.h> +#include <linux/module.h> #include <asm/io.h> diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c index 3be60da..847553f 100644 --- a/drivers/ide/cy82c693.c +++ b/drivers/ide/cy82c693.c @@ -1,7 +1,7 @@ /* * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator - * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz * * CYPRESS CY82C693 chipset IDE controller * @@ -90,7 +90,7 @@ static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) u8 time_16, time_8; /* select primary or secondary channel */ - if (hwif->index > 0) { /* drive is on the secondary channel */ + if (drive->dn > 1) { /* drive is on the secondary channel */ dev = pci_get_slot(dev->bus, dev->devfn+1); if (!dev) { printk(KERN_ERR "%s: tune_drive: " @@ -141,6 +141,8 @@ static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16); pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8); } + if (drive->dn > 1) + pci_dev_put(dev); } static void __devinit init_iops_cy82c693(ide_hwif_t *hwif) diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 4a697a2..8716066 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -521,8 +521,8 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { d.init_dma = icside_dma_init; d.port_ops = &icside_v6_port_ops; + } else d.dma_ops = NULL; - } ret = ide_host_register(host, &d, hws); if (ret) diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 2af8cb4..f22edc6 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -17,6 +17,7 @@ #include <linux/ide.h> #include <linux/pci.h> #include <linux/dmi.h> +#include <linux/module.h> #include <acpi/acpi_bus.h> diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 6f218e01..fac3d9d 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -5,6 +5,7 @@ #include <linux/kernel.h> #include <linux/cdrom.h> #include <linux/delay.h> +#include <linux/export.h> #include <linux/ide.h> #include <linux/scatterlist.h> #include <linux/gfp.h> diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 04b0956..8126824 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -43,7 +43,6 @@ /* For SCSI -> ATAPI command conversion */ #include <scsi/scsi.h> -#include <linux/irq.h> #include <linux/io.h> #include <asm/byteorder.h> #include <linux/uaccess.h> diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c index f9bbd90..8b570a1 100644 --- a/drivers/ide/ide-disk_proc.c +++ b/drivers/ide/ide-disk_proc.c @@ -1,6 +1,7 @@ #include <linux/kernel.h> #include <linux/ide.h> #include <linux/slab.h> +#include <linux/export.h> #include <linux/seq_file.h> #include "ide-disk.h" diff --git a/drivers/ide/ide-dma-sff.c b/drivers/ide/ide-dma-sff.c index e4cdf78..289d16c 100644 --- a/drivers/ide/ide-dma-sff.c +++ b/drivers/ide/ide-dma-sff.c @@ -1,5 +1,6 @@ #include <linux/types.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> #include <linux/scatterlist.h> #include <linux/dma-mapping.h> diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index d413690..17a65ac 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -31,6 +31,7 @@ #include <linux/types.h> #include <linux/gfp.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> #include <linux/scatterlist.h> #include <linux/dma-mapping.h> diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c index c0aa93f..3297066 100644 --- a/drivers/ide/ide-eh.c +++ b/drivers/ide/ide-eh.c @@ -1,5 +1,6 @@ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> #include <linux/delay.h> diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 61fdf54..3d42043 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -35,7 +35,6 @@ #include <scsi/scsi_ioctl.h> #include <asm/byteorder.h> -#include <linux/irq.h> #include <linux/uaccess.h> #include <linux/io.h> #include <asm/unaligned.h> diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c index d711d9b..1600720 100644 --- a/drivers/ide/ide-floppy_proc.c +++ b/drivers/ide/ide-floppy_proc.c @@ -1,4 +1,5 @@ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> #include <linux/seq_file.h> diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c index 46721c4..1976397 100644 --- a/drivers/ide/ide-io-std.c +++ b/drivers/ide/ide-io-std.c @@ -1,5 +1,6 @@ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> #if defined(CONFIG_ARM) || defined(CONFIG_M68K) || defined(CONFIG_MIPS) || \ diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index 9965ecd..4d19eb9 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -2,6 +2,7 @@ * IDE ioctls handling. */ +#include <linux/export.h> #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/slab.h> diff --git a/drivers/ide/ide-legacy.c b/drivers/ide/ide-legacy.c index b9654a7..30fe363 100644 --- a/drivers/ide/ide-legacy.c +++ b/drivers/ide/ide-legacy.c @@ -1,4 +1,5 @@ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> static void ide_legacy_init_one(struct ide_hw **hws, struct ide_hw *hw, diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index e386a32..d9c9829 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -1,6 +1,7 @@ #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/interrupt.h> #include <linux/ide.h> #include <linux/bitops.h> diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index 017b1df..e5f3db8 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/pnp.h> #include <linux/ide.h> +#include <linux/module.h> #define DRV_NAME "ide-pnp" diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 7ecb1ad..ce8237d 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -41,7 +41,6 @@ #include <scsi/scsi.h> #include <asm/byteorder.h> -#include <linux/irq.h> #include <linux/uaccess.h> #include <linux/io.h> #include <asm/unaligned.h> diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 600c89a..5bc2839 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -11,6 +11,7 @@ #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/errno.h> diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c index 5fc8d5c..eb42188 100644 --- a/drivers/ide/ide-xfer-mode.c +++ b/drivers/ide/ide-xfer-mode.c @@ -1,6 +1,7 @@ #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/interrupt.h> #include <linux/ide.h> #include <linux/bitops.h> diff --git a/drivers/ide/ide_platform.c b/drivers/ide/ide_platform.c index 542603b..962693b 100644 --- a/drivers/ide/ide_platform.c +++ b/drivers/ide/ide_platform.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/ata_platform.h> #include <linux/platform_device.h> +#include <linux/interrupt.h> #include <linux/io.h> static void __devinit plat_ide_setup_ports(struct ide_hw *hw, @@ -95,7 +96,10 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) plat_ide_setup_ports(&hw, base, alt_base, pdata, res_irq->start); hw.dev = &pdev->dev; - d.irq_flags = res_irq->flags; + d.irq_flags = res_irq->flags & IRQF_TRIGGER_MASK; + if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE) + d.irq_flags |= IRQF_SHARED; + if (mmio) d.host_flags |= IDE_HFLAG_MMIO; diff --git a/drivers/ide/macide.c b/drivers/ide/macide.c index 505ec43..adc5fe9 100644 --- a/drivers/ide/macide.c +++ b/drivers/ide/macide.c @@ -17,6 +17,7 @@ #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/ide.h> +#include <linux/module.h> #include <asm/macintosh.h> #include <asm/macints.h> diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index 9e8f4e1..712c790 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c @@ -342,7 +342,7 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) return -ENODEV; } - mem_size = mem->end - mem->start + 1; + mem_size = resource_size(mem); if (request_mem_region(mem->start, mem_size, "palm_bk3710") == NULL) { printk(KERN_ERR "failed to request memory region\n"); return -EBUSY; diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index b59d04c..1892e81 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c @@ -331,7 +331,7 @@ static const struct ide_port_ops ich_port_ops = { .udma_mask = udma, \ } -#define DECLARE_ICH_DEV(udma) \ +#define DECLARE_ICH_DEV(mwdma, udma) \ { \ .name = DRV_NAME, \ .init_chipset = init_chipset_ich, \ @@ -340,7 +340,7 @@ static const struct ide_port_ops ich_port_ops = { .port_ops = &ich_port_ops, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ - .mwdma_mask = ATA_MWDMA12_ONLY, \ + .mwdma_mask = mwdma, \ .udma_mask = udma, \ } @@ -362,13 +362,15 @@ static const struct ide_port_info piix_pci_info[] __devinitdata = { /* 2: PIIX4 */ DECLARE_PIIX_DEV(ATA_UDMA2), /* 3: ICH0 */ - DECLARE_ICH_DEV(ATA_UDMA2), + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA2), /* 4: ICH */ - DECLARE_ICH_DEV(ATA_UDMA4), + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA4), /* 5: PIIX4 */ DECLARE_PIIX_DEV(ATA_UDMA4), - /* 6: ICH[2-7]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */ - DECLARE_ICH_DEV(ATA_UDMA5), + /* 6: ICH[2-6]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */ + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA5), + /* 7: ICH7/7-R, no MWDMA1 */ + DECLARE_ICH_DEV(ATA_MWDMA2_ONLY, ATA_UDMA5), }; /** @@ -438,9 +440,9 @@ static const struct pci_device_id piix_pci_tbl[] = { #endif { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2), 6 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 6 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 7 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 6 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 7 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6), 6 }, { 0, }, }; diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 1db7c43..e944c7f 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c @@ -28,6 +28,7 @@ #include <linux/delay.h> #include <linux/ide.h> #include <linux/notifier.h> +#include <linux/module.h> #include <linux/reboot.h> #include <linux/pci.h> #include <linux/adb.h> diff --git a/drivers/ide/q40ide.c b/drivers/ide/q40ide.c index 9078608..ecd0a69 100644 --- a/drivers/ide/q40ide.c +++ b/drivers/ide/q40ide.c @@ -15,6 +15,7 @@ #include <linux/interrupt.h> #include <linux/blkdev.h> #include <linux/ide.h> +#include <linux/module.h> #include <asm/ide.h> diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index ab3db61..34a5e52 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -8,6 +8,7 @@ #include <linux/types.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/interrupt.h> diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c index e444d24..4799d5c 100644 --- a/drivers/ide/tc86c001.c +++ b/drivers/ide/tc86c001.c @@ -10,6 +10,7 @@ #include <linux/types.h> #include <linux/pci.h> #include <linux/ide.h> +#include <linux/module.h> #define DRV_NAME "tc86c001" diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c index e53a1b7..281c914 100644 --- a/drivers/ide/triflex.c +++ b/drivers/ide/triflex.c @@ -113,12 +113,26 @@ static const struct pci_device_id triflex_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, triflex_pci_tbl); +#ifdef CONFIG_PM +static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state) +{ + /* + * We must not disable or powerdown the device. + * APM bios refuses to suspend if IDE is not accessible. + */ + pci_save_state(dev); + return 0; +} +#else +#define triflex_ide_pci_suspend NULL +#endif + static struct pci_driver triflex_pci_driver = { .name = "TRIFLEX_IDE", .id_table = triflex_pci_tbl, .probe = triflex_init_one, .remove = ide_pci_remove, - .suspend = ide_pci_suspend, + .suspend = triflex_ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index bed3e39..71c2319 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -551,10 +551,10 @@ static int __init tx4939ide_probe(struct platform_device *pdev) return -ENODEV; if (!devm_request_mem_region(&pdev->dev, res->start, - res->end - res->start + 1, "tx4938ide")) + resource_size(res), "tx4938ide")) return -EBUSY; mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start, - res->end - res->start + 1); + resource_size(res)); if (!mapbase) return -EBUSY; memset(&hw, 0, sizeof(hw)); |