diff options
Diffstat (limited to 'drivers/input/keyboard/cypressbln/issp_directives.h')
| -rw-r--r-- | drivers/input/keyboard/cypressbln/issp_directives.h | 474 |
1 files changed, 474 insertions, 0 deletions
diff --git a/drivers/input/keyboard/cypressbln/issp_directives.h b/drivers/input/keyboard/cypressbln/issp_directives.h new file mode 100644 index 0000000..b6cdddc --- /dev/null +++ b/drivers/input/keyboard/cypressbln/issp_directives.h @@ -0,0 +1,474 @@ +// filename: ISSP_Directives.h +#include "issp_revision.h" +#ifdef PROJECT_REV_304 +/* Copyright 2006-2007, Cypress Semiconductor Corporation. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND +CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS +BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT +OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONRTACT, STRICT LIABILITY, OR TORT (INCLUDING +NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + + Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND,EXPRESS OR IMPLIED, + WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. + Cypress reserves the right to make changes without further notice to the + materials described herein. Cypress does not assume any liability arising + out of the application or use of any product or circuit described herein. + Cypress does not authorize its products for use as critical components in + life-support systems where a malfunction or failure may reasonably be + expected to result in significant injury to the user. The inclusion of + Cypress� product in a life-support systems application implies that the + manufacturer assumes all risk of such use and in doing so indemnifies + Cypress against all charges. + + Use may be limited by and subject to the applicable Cypress software + license agreement. + +----------------------------------------------------------------------------*/ + +// --------------------- Compiler Directives ---------------------------------- +#ifndef INC_ISSP_DIRECTIVES +#define INC_ISSP_DIRECTIVES + +// This directive will enable a Genral Purpose test-point on P1.7 +// It can be toggled as needed to measure timing, execution, etc... +// A "Test Point" sets a GPIO pin of the host processor high or low. This GPIO +// pin can be observed with an oscilloscope to verify the timing of key +// programming steps. TPs have been added in main() that set Port 0, pin 1 +// high during bulk erase, during each block write and during security write. +// The timing of these programming steps should be verified as correct as part +// of the validation process of the final program. + +//JBA +//#define USE_TP + +// **************************************************************************** +// ************* USER ATTENTION REQUIRED: TARGET SUPPLY VOLTAGE *************** +// **************************************************************************** +// This directive causes the proper Initialization vector #3 to be sent +// to the Target, based on what the Target Vdd programming voltage will +// be. Either 5V (if #define enabled) or 3.3V (if #define disabled). + +//JBA +//#define TARGET_VOLTAGE_IS_5V + +// **************************************************************************** +// **************** USER ATTENTION REQUIRED: PROGRAMMING MODE ***************** +// **************************************************************************** +// This directive selects whether code that uses reset programming mode or code +// that uses power cycle programming is use. Reset programming mode uses the +// external reset pin (XRES) to enter programming mode. Power cycle programming +// mode uses the power-on reset to enter programming mode. +// Applying signals to various pins on the target device must be done in a +// deliberate order when using power cycle mode. Otherwise, high signals to GPIO +// pins on the target will power the PSoC through the protection diodes. + +//JBA +// choose the RESET MODE or POWER MODE +// #define RESET_MODE + +// **************************************************************************** +// ****************** USER ATTENTION REQUIRED: TARGET PSOC ******************** +// **************************************************************************** +// The directives below enable support for various PSoC devices. The root part +// number to be programmed should be un-commented so that its value becomes +// defined. All other devices should be commented out. +// Select one device to be supported below: + +/*************** CY8CTMA30x, CY8CTMG30x, CY8CTST30x series by KIMC, 2009.08.11 ***********************************/ +//#define CY8CTST300_36 // CY8CTST300_36LQXI // 2009.08.11, not tested. +//#define CY8CTST300_48 // CY8CTST300_48LTXI // 2009.08.11, not tested. +//#define CY8CTST300_49 // CY8CTST300_49FNXI // 2009.08.11, not tested. +//#define CY8CTMA300_36 // CY8CTMA300_36LQXI // 2009.08.11, Test OK. +//#define CY8CTMA300_48 // CY8CTMA300_48LTXI // 2009.08.11, not tested. +//#define CY8CTMA300_49 // CY8CTMA300_49FNXI // 2009.08.11, not tested. +//#define CY8CTMG300_36 // CY8CTMG300_36LQXI // 2009.08.11, not tested. +//#define CY8CTMG300_48 // CY8CTMG300_48LTXI // 2009.08.11, not tested. +//#define CY8CTMG300_49 // CY8CTMG300_49FNXI // 2009.08.11, not tested. +//#define CY8CTMG300B_36 // CY8CTMG300B_36LQXI // 2009.08.11, not tested. +//#define CY8CTMA300B_36 // CY8CTMA300B_36LQXI // 2009.08.11, not tested. +//#define CY8CTST300B_36 // CY8CTST300B_36LQXI // 2009.08.11, not tested. +//#define CY8CTMA301_36 // CY8CTMA301_36LQXI // 2009.08.11, not tested. +//#define CY8CTMA301_48 // CY8CTMA301_48LTXI // 2009.08.11, not tested. +//#define CY8CTMA301D_36 // CY8CTMA301D_36LQXI // 2009.08.11, not tested. +//#define CY8CTMA301D_48 // CY8CTMA301D_48LTXI // 2009.08.11, not tested. +//#define CY8CTMA300D_36 // CY8CTMA300D_36LQXI // 2009.08.11, not tested. +//#define CY8CTMA300D_48 // CY8CTMA300D_48LTXI // 2009.08.11, not tested. +//#define CY8CTMA300D_49 // CY8CTMA300D_49FNXIT // 2009.08.11, not tested. +/****************************************************************************************************/ + +/*************** CY8CTMG/TST series modified by KJHW, 2009.08.14 *********************************************/ +//#define CY8CTMG110 +//#define CY8CTST200_24PIN +//#define CY8CTST200_32PIN +//#define CY8CTMG200_24PIN +//#define CY8CTMG200_32PIN +/***************************************************************************************************/ + +#define CY8C20236 +// **** CY8C20x66 devices **** +//#define CY8C20246 /// 2009.03.26. kimc +//#define CY8C20266 +//#define CY8C20366 +//#define CY8C20466 +//#define CY8C20566 +//#define CY8C20666 +//#define CY8C20066 +//#define CY8C200661 + +// **** CY8C21x23 devices **** +//#define CY8C21123 +//#define CY8C21223 +//#define CY8C21323 +//#define CY8C21002 + +// **** CY8C21x34 devices **** +//#define CY8C21234 +//#define CY8C21334 +//#define CY8C21434 +//#define CY8C21534 +//#define CY8C21634 +//#define CY8C21001 + +// **** CY8C24x23A devices **** +//#define CY8C24123A +//#define CY8C24223A +//#define CY8C24423A +//#define CY8C24000A + +// **** CY8C24x94 devices **** +//#define CY8C24794 +//#define CY8C24894 +//#define CY8C24994 +//#define CY8C24094 + +// **** CY8C27x34 devices **** +//#define CY8C27143 +//#define CY8C27243 +//#define CY8C27443 +//#define CY8C27543 +//#define CY8C27643 +//#define CY8C27002 + +// **** CY8C29x66 devices **** +//#define CY8C29466 +//#define CY8C29566 +//#define CY8C29666 +//#define CY8C29866 +//#define CY8C29002 + +//----------------------------------------------------------------------------- +// This section sets the Family that has been selected. These are used to +// simplify other conditional compilation blocks. +//----------------------------------------------------------------------------- + +/*************** CY8CTMA30x, CY8CTMG30x, CY8CTST30x series by KIMC, 2009.08.11 ***********************************/ +#ifdef CY8CTST300_36 // CY8CTST300_36LQXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTST300_48 // CY8CTST300_48LTXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTST300_49 // CY8CTST300_49FNXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMA300_36 // CY8CTMA300_36LQXI // 2009.08.11, test OK +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMA300_48 // CY8CTMA300_48LTXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMA300_49 // CY8CTMA300_49FNXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMG300_36 // CY8CTMG300_36LQXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMG300_48 // CY8CTMG300_48LTXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMG300_49 // CY8CTMG300_49FNXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMG300B_36 // CY8CTMG300B_36LQXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMA300B_36 // CY8CTMA300B_36LQXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTST300B_36 // CY8CTST300B_36LQXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMA301_36 // CY8CTMA301_36LQXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMA301_48 // CY8CTMA301_48LTXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMA301D_36 // CY8CTMA301D_36LQXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMA301D_48 // CY8CTMA301D_48LTXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMA300D_36 // CY8CTMA300D_36LQXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMA300D_48 // CY8CTMA300D_48LTXI // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +#ifdef CY8CTMA300D_49 // CY8CTMA300D_49FNXIT // 2009.08.11, not tested. +#define CY8CTMx30x +#define CY8C20x66 +#endif +/**************************************************/ + +/*************** CY8CTMG/TST series modified by KJHW, 2009.08.14 *********************************************/ + +#ifdef CY8CTMG110 +#define CY8C21x34 +#endif +#ifdef CY8CTST200_24PIN +#define CY8C20x66 +#endif +#ifdef CY8CTST200_32PIN +#define CY8C20x66 +#endif +#ifdef CY8CTMG200_24PIN +#define CY8C20x66 +#endif +#ifdef CY8CTMG200_32PIN +#define CY8C20x66 +#endif + +/***************************************************************************************************/ +#ifdef CY8C20236 +#define CY8C20x66 +#endif +#ifdef CY8C20246 /// 2009.03.26. kimc +#define CY8C20x66 +#endif +#ifdef CY8C20266 +#define CY8C20x66 +#endif +#ifdef CY8C20366 +#define CY8C20x66 +#endif +#ifdef CY8C20466 +#define CY8C20x66 +#endif +#ifdef CY8C20566 +#define CY8C20x66 +#endif +#ifdef CY8C20666 +#define CY8C20x66 +#endif +#ifdef CY8C20066 +#define CY8C20x66 +#endif +#ifdef CY8C200661 +#define CY8C20x66 +#endif + +#ifdef CY8C21123 +#define CY8C21x23 +#endif +#ifdef CY8C21223 +#define CY8C21x23 +#endif +#ifdef CY8C21323 +#define CY8C21x23 +#endif +#ifdef CY8C21002 +#define CY8C21x23 +#endif +#ifdef CY8C21234 +#define CY8C21x34 +#endif +#ifdef CY8C21334 +#define CY8C21x34 +#endif +#ifdef CY8C21434 +#define CY8C21x34 +#endif +#ifdef CY8C21534 +#define CY8C21x34 +#endif +#ifdef CY8C21634 +#define CY8C21x34 +#endif +#ifdef CY8C21001 +#define CY8C21x34 +#endif +#ifdef CY8C24123A +#define CY8C24x23A +#endif +#ifdef CY8C24223A +#define CY8C24x23A +#endif +#ifdef CY8C24423A +#define CY8C24x23A +#endif +#ifdef CY8C24000A +#define CY8C24x23A +#endif +#ifdef CY8C24794 +#define CY8C24x94 +#endif +#ifdef CY8C24894 +#define CY8C24x94 +#endif +#ifdef CY8C24994 +#define CY8C24x94 +#endif +#ifdef CY8C24094 +#define CY8C24x94 +#endif +#ifdef CY8C27143 +#define CY8C27x43 +#endif +#ifdef CY8C27243 +#define CY8C27x43 +#endif +#ifdef CY8C27443 +#define CY8C27x43 +#endif +#ifdef CY8C27543 +#define CY8C27x43 +#endif +#ifdef CY8C27643 +#define CY8C27x43 +#endif +#ifdef CY8C27002 +#define CY8C27x43 +#endif +#ifdef CY8C29466 +#define CY8C29x66 +#endif +#ifdef CY8C29566 +#define CY8C29x66 +#endif +#ifdef CY8C29666 +#define CY8C29x66 +#endif +#ifdef CY8C29866 +#define CY8C29x66 +#endif +#ifdef CY8C29002 +#define CY8C29x66 +#endif + +//----------------------------------------------------------------------------- +// The directives below are used for Krypton. +// See the Krypton programming spec 001-15870 rev *A for more details. (The +// spec uses "mnemonics" instead of "directives" +//----------------------------------------------------------------------------- +#ifdef CY8C20x66 +#define TSYNC + +#define ID_SETUP_1 //PTJ: ID_SETUP_1 is similar to init1_v +#define ID_SETUP_2 //PTJ: ID_SETUP_2 is similar to init2_v +#define SET_BLOCK_NUM +#define CHECKSUM_SETUP //PTJ: CHECKSUM_SETUP_20x66 is the same as CHECKSUM-SETUP in 001-15870 +#define READ_CHECKSUM +#define PROGRAM_AND_VERIFY //PTJ: PROGRAM_BLOCK_20x66 is the same as PROGRAM-AND-VERIFY in 001-15870 +#define ERASE +#define SECURE +#define READ_SECURITY +#define READ_WRITE_SETUP +#define WRITE_BYTE +#define VERIFY_SETUP +#define READ_STATUS +#define READ_BYTE + //READ_ID_WORD //PTJ: 3rd Party Progrmmer will have to write code to handle this directive, we do it out own way in this code, see read_id_v +#endif +//----------------------------------------------------------------------------- + +//----------------------------------------------------------------------------- +// The directives below are used to define various sets of vectors that differ +// for more than one set of PSoC parts. +//----------------------------------------------------------------------------- +// **** Select a Checksum Setup Vector **** +#ifdef CY8C21x23 +#define CHECKSUM_SETUP_21_27 +#endif +#ifdef CY8C21x34 +#define CHECKSUM_SETUP_21_27 +#endif +#ifdef CY8C24x23A +#define CHECKSUM_SETUP_24_24A +#endif +#ifdef CY8C24x94 +#define CHECKSUM_SETUP_24_29 +#endif +#ifdef CY8C27x43 +#define CHECKSUM_SETUP_21_27 +#endif +#ifdef CY8C29x66 +#define CHECKSUM_SETUP_24_29 +#endif + +// **** Select a Program Block Vector **** + +#ifdef CY8C21x23 +#define PROGRAM_BLOCK_21_24_29 +#endif +#ifdef CY8C21x34 +#define PROGRAM_BLOCK_21_24_29 +#endif +#ifdef CY8C24x23A +#define PROGRAM_BLOCK_21_24_29 +#endif +#ifdef CY8C24x94 +#define PROGRAM_BLOCK_21_24_29 +#endif +#ifdef CY8C27x43 +#define PROGRAM_BLOCK_27 +#endif +#ifdef CY8C29x66 +#define PROGRAM_BLOCK_21_24_29 +#endif + +//----------------------------------------------------------------------------- +// The directives below are used to control switching banks if the device is +// has multiple banks of Flash. +//----------------------------------------------------------------------------- +// **** Select a Checksum Setup Vector **** +#ifdef CY8C24x94 +#define MULTI_BANK +#endif +#ifdef CY8C29x66 +#define MULTI_BANK +#endif + +// ---------------------------------------------------------------------------- +#endif //(INC_ISSP_DIRECTIVES) +#endif //(PROJECT_REV_) +//end of file ISSP_Directives.h |