diff options
Diffstat (limited to 'drivers/input')
-rw-r--r-- | drivers/input/keyboard/hilkbd.c | 114 |
1 files changed, 66 insertions, 48 deletions
diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c index 35461ea..255a6ec 100644 --- a/drivers/input/keyboard/hilkbd.c +++ b/drivers/input/keyboard/hilkbd.c @@ -6,10 +6,10 @@ * Copyright (C) 1999-2006 Helge Deller <deller@gmx.de> * * Very basic HP Human Interface Loop (HIL) driver. - * This driver handles the keyboard on HP300 (m68k) and on some + * This driver handles the keyboard on HP300 (m68k) and on some * HP700 (parisc) series machines. * - * + * * This file is subject to the terms and conditions of the GNU General Public * License version 2. See the file COPYING in the main directory of this * archive for more details. @@ -64,9 +64,9 @@ MODULE_LICENSE("GPL v2"); #endif - + /* HIL helper functions */ - + #define hil_busy() (hil_readb(HILBASE + HIL_CMD) & HIL_BUSY) #define hil_data_available() (hil_readb(HILBASE + HIL_CMD) & HIL_DATA_RDY) #define hil_status() (hil_readb(HILBASE + HIL_CMD)) @@ -75,7 +75,7 @@ MODULE_LICENSE("GPL v2"); #define hil_write_data(x) do { hil_writeb((x), HILBASE + HIL_DATA); } while (0) /* HIL constants */ - + #define HIL_BUSY 0x02 #define HIL_DATA_RDY 0x01 @@ -86,10 +86,10 @@ MODULE_LICENSE("GPL v2"); #define HIL_INTON 0x5C /* Turn on interrupts. */ #define HIL_INTOFF 0x5D /* Turn off interrupts. */ -#define HIL_READKBDSADR 0xF9 -#define HIL_WRITEKBDSADR 0xE9 +#define HIL_READKBDSADR 0xF9 +#define HIL_WRITEKBDSADR 0xE9 -static unsigned int hphilkeyb_keycode[HIL_KEYCODES_SET1_TBLSIZE] = +static unsigned int hphilkeyb_keycode[HIL_KEYCODES_SET1_TBLSIZE] = { HIL_KEYCODES_SET1 }; /* HIL structure */ @@ -97,11 +97,11 @@ static struct { struct input_dev *dev; unsigned int curdev; - + unsigned char s; unsigned char c; int valid; - + unsigned char data[16]; unsigned int ptr; spinlock_t lock; @@ -115,7 +115,7 @@ static void poll_finished(void) int down; int key; unsigned char scode; - + switch (hil_dev.data[0]) { case 0x40: down = (hil_dev.data[1] & 1) == 0; @@ -127,6 +127,7 @@ static void poll_finished(void) hil_dev.curdev = 0; } + static inline void handle_status(unsigned char s, unsigned char c) { if (c & 0x8) { @@ -143,6 +144,7 @@ static inline void handle_status(unsigned char s, unsigned char c) } } + static inline void handle_data(unsigned char s, unsigned char c) { if (hil_dev.curdev) { @@ -152,13 +154,11 @@ static inline void handle_data(unsigned char s, unsigned char c) } -/* - * Handle HIL interrupts. - */ +/* handle HIL interrupts */ static irqreturn_t hil_interrupt(int irq, void *handle) { unsigned char s, c; - + s = hil_status(); c = hil_read_data(); @@ -179,10 +179,8 @@ static irqreturn_t hil_interrupt(int irq, void *handle) return IRQ_HANDLED; } -/* - * Send a command to the HIL - */ +/* send a command to the HIL */ static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len) { unsigned long flags; @@ -200,16 +198,14 @@ static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len) } -/* - * Initialise HIL. - */ - +/* initialise HIL */ static int __init hil_keyb_init(void) { unsigned char c; unsigned int i, kbid; wait_queue_head_t hil_wait; + int err; if (hil_dev.dev) { return -ENODEV; /* already initialized */ @@ -219,15 +215,25 @@ hil_keyb_init(void) if (!hil_dev.dev) return -ENOMEM; hil_dev.dev->private = &hil_dev; - + #if defined(CONFIG_HP300) - if (!hwreg_present((void *)(HILBASE + HIL_DATA))) - return -ENODEV; - - request_region(HILBASE+HIL_DATA, 2, "hil"); + if (!hwreg_present((void *)(HILBASE + HIL_DATA))) { + printk(KERN_ERR "HIL: hardware register was not found\n"); + err = -ENODEV; + goto err1; + } + if (!request_region(HILBASE + HIL_DATA, 2, "hil")) { + printk(KERN_ERR "HIL: IOPORT region already used\n"); + err = -EIO; + goto err1; + } #endif - - request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id); + + err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id); + if (err) { + printk(KERN_ERR "HIL: Can't get IRQ\n"); + goto err2; + } /* Turn on interrupts */ hil_do(HIL_INTON, NULL, 0); @@ -239,47 +245,63 @@ hil_keyb_init(void) init_waitqueue_head(&hil_wait); wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3*HZ); if (!hil_dev.valid) { - printk(KERN_WARNING "HIL: timed out, assuming no keyboard present.\n"); + printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n"); } - c = hil_dev.c; + c = hil_dev.c; hil_dev.valid = 0; if (c == 0) { kbid = -1; - printk(KERN_WARNING "HIL: no keyboard present.\n"); + printk(KERN_WARNING "HIL: no keyboard present\n"); } else { kbid = ffz(~c); - /* printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid); */ + printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid); } /* set it to raw mode */ c = 0; hil_do(HIL_WRITEKBDSADR, &c, 1); - + for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++) if (hphilkeyb_keycode[i] != KEY_RESERVED) set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit); - hil_dev.dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - hil_dev.dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL); - hil_dev.dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE; - hil_dev.dev->keycodesize = sizeof(hphilkeyb_keycode[0]); - hil_dev.dev->keycode = hphilkeyb_keycode; - hil_dev.dev->name = "HIL keyboard"; - hil_dev.dev->phys = "hpkbd/input0"; + hil_dev.dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + hil_dev.dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL); + hil_dev.dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE; + hil_dev.dev->keycodesize= sizeof(hphilkeyb_keycode[0]); + hil_dev.dev->keycode = hphilkeyb_keycode; + hil_dev.dev->name = "HIL keyboard"; + hil_dev.dev->phys = "hpkbd/input0"; hil_dev.dev->id.bustype = BUS_HIL; hil_dev.dev->id.vendor = PCI_VENDOR_ID_HP; hil_dev.dev->id.product = 0x0001; hil_dev.dev->id.version = 0x0010; - input_register_device(hil_dev.dev); + err = input_register_device(hil_dev.dev); + if (err) { + printk(KERN_ERR "HIL: Can't register device\n"); + goto err3; + } printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n", - hil_dev.dev->name, kbid, HILBASE, HIL_IRQ); + hil_dev.dev->name, kbid, HILBASE, HIL_IRQ); return 0; + +err3: + hil_do(HIL_INTOFF, NULL, 0); + disable_irq(HIL_IRQ); + free_irq(HIL_IRQ, hil_dev.dev_id); +err2: + release_region(HILBASE + HIL_DATA, 2); +err1: + input_free_device(hil_dev.dev); + hil_dev.dev = NULL; + return err; } + #if defined(CONFIG_PARISC) static int __init hil_init_chip(struct parisc_device *dev) @@ -292,7 +314,7 @@ hil_init_chip(struct parisc_device *dev) hil_base = dev->hpa.start; hil_irq = dev->irq; hil_dev.dev_id = dev; - + printk(KERN_INFO "Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq); return hil_keyb_init(); @@ -313,9 +335,6 @@ static struct parisc_driver hil_driver = { #endif /* CONFIG_PARISC */ - - - static int __init hil_init(void) { #if defined(CONFIG_PARISC) @@ -349,4 +368,3 @@ static void __exit hil_exit(void) module_init(hil_init); module_exit(hil_exit); - |