aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/macintosh
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/macintosh')
-rw-r--r--drivers/macintosh/mediabay.c328
1 files changed, 122 insertions, 206 deletions
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index 029ad8c..08002b8 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -33,15 +33,6 @@
#include <linux/adb.h>
#include <linux/pmu.h>
-
-#define MB_DEBUG
-
-#ifdef MB_DEBUG
-#define MBDBG(fmt, arg...) printk(KERN_INFO fmt , ## arg)
-#else
-#define MBDBG(fmt, arg...) do { } while (0)
-#endif
-
#define MB_FCR32(bay, r) ((bay)->base + ((r) >> 2))
#define MB_FCR8(bay, r) (((volatile u8 __iomem *)((bay)->base)) + (r))
@@ -76,28 +67,14 @@ struct media_bay_info {
int index;
int cached_gpio;
int sleeping;
+ int user_lock;
struct mutex lock;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- ide_hwif_t *cd_port;
- void __iomem *cd_base;
- int cd_irq;
- int cd_retry;
-#endif
-#if defined(CONFIG_BLK_DEV_IDE_PMAC)
- int cd_index;
-#endif
};
#define MAX_BAYS 2
static struct media_bay_info media_bays[MAX_BAYS];
-int media_bay_count = 0;
-
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-/* check the busy bit in the media-bay ide interface
- (assumes the media-bay contains an ide device) */
-#define MB_IDE_READY(i) ((readb(media_bays[i].cd_base + 0x70) & 0x80) == 0)
-#endif
+static int media_bay_count = 0;
/*
* Wait that number of ms between each step in normal polling mode
@@ -130,21 +107,11 @@ int media_bay_count = 0;
/*
* Wait this many ticks after an IDE device (e.g. CD-ROM) is inserted
- * (or until the device is ready) before waiting for busy bit to disappear
+ * (or until the device is ready) before calling into the driver
*/
#define MB_IDE_WAIT 1000
/*
- * Timeout waiting for busy bit of an IDE device to go down
- */
-#define MB_IDE_TIMEOUT 5000
-
-/*
- * Max retries of the full power up/down sequence for an IDE device
- */
-#define MAX_CD_RETRIES 3
-
-/*
* States of a media bay
*/
enum {
@@ -153,7 +120,6 @@ enum {
mb_enabling_bay, /* enable bits set, waiting MB_RESET_DELAY */
mb_resetting, /* reset bit unset, waiting MB_SETUP_DELAY */
mb_ide_resetting, /* IDE reset bit unser, waiting MB_IDE_WAIT */
- mb_ide_waiting, /* Waiting for BUSY bit to go away until MB_IDE_TIMEOUT */
mb_up, /* Media bay full */
mb_powering_down /* Powering down (avoid too fast down/up) */
};
@@ -373,12 +339,12 @@ static inline void set_mb_power(struct media_bay_info* bay, int onoff)
if (onoff) {
bay->ops->power(bay, 1);
bay->state = mb_powering_up;
- MBDBG("mediabay%d: powering up\n", bay->index);
+ pr_debug("mediabay%d: powering up\n", bay->index);
} else {
/* Make sure everything is powered down & disabled */
bay->ops->power(bay, 0);
bay->state = mb_powering_down;
- MBDBG("mediabay%d: powering down\n", bay->index);
+ pr_debug("mediabay%d: powering down\n", bay->index);
}
bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
}
@@ -387,107 +353,118 @@ static void poll_media_bay(struct media_bay_info* bay)
{
int id = bay->ops->content(bay);
- if (id == bay->last_value) {
- if (id != bay->content_id) {
- bay->value_count += msecs_to_jiffies(MB_POLL_DELAY);
- if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) {
- /* If the device type changes without going thru
- * "MB_NO", we force a pass by "MB_NO" to make sure
- * things are properly reset
- */
- if ((id != MB_NO) && (bay->content_id != MB_NO)) {
- id = MB_NO;
- MBDBG("mediabay%d: forcing MB_NO\n", bay->index);
- }
- MBDBG("mediabay%d: switching to %d\n", bay->index, id);
- set_mb_power(bay, id != MB_NO);
- bay->content_id = id;
- if (id == MB_NO) {
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- bay->cd_retry = 0;
-#endif
- printk(KERN_INFO "media bay %d is empty\n", bay->index);
- }
- }
- }
- } else {
+ static char *mb_content_types[] = {
+ "a floppy drive",
+ "a floppy drive",
+ "an unsuported audio device",
+ "an ATA device",
+ "an unsupported PCI device",
+ "an unknown device",
+ };
+
+ if (id != bay->last_value) {
bay->last_value = id;
bay->value_count = 0;
+ return;
+ }
+ if (id == bay->content_id)
+ return;
+
+ bay->value_count += msecs_to_jiffies(MB_POLL_DELAY);
+ if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) {
+ /* If the device type changes without going thru
+ * "MB_NO", we force a pass by "MB_NO" to make sure
+ * things are properly reset
+ */
+ if ((id != MB_NO) && (bay->content_id != MB_NO)) {
+ id = MB_NO;
+ pr_debug("mediabay%d: forcing MB_NO\n", bay->index);
+ }
+ pr_debug("mediabay%d: switching to %d\n", bay->index, id);
+ set_mb_power(bay, id != MB_NO);
+ bay->content_id = id;
+ if (id >= MB_NO || id < 0)
+ printk(KERN_INFO "mediabay%d: Bay is now empty\n", bay->index);
+ else
+ printk(KERN_INFO "mediabay%d: Bay contains %s\n",
+ bay->index, mb_content_types[id]);
}
}
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-int check_media_bay(struct device_node *which_bay, int what)
+int check_media_bay(struct macio_dev *baydev)
{
- int i;
+ struct media_bay_info* bay;
+ int id;
- for (i=0; i<media_bay_count; i++)
- if (media_bays[i].mdev && which_bay == media_bays[i].mdev->ofdev.node) {
- if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up)
- return 0;
- media_bays[i].cd_index = -1;
- return -EINVAL;
- }
- return -ENODEV;
+ if (baydev == NULL)
+ return MB_NO;
+
+ /* This returns an instant snapshot, not locking, sine
+ * we may be called with the bay lock held. The resulting
+ * fuzzyness of the result if called at the wrong time is
+ * not actually a huge deal
+ */
+ bay = macio_get_drvdata(baydev);
+ if (bay == NULL)
+ return MB_NO;
+ id = bay->content_id;
+ if (bay->state != mb_up)
+ return MB_NO;
+ if (id == MB_FD1)
+ return MB_FD;
+ return id;
}
-EXPORT_SYMBOL(check_media_bay);
+EXPORT_SYMBOL_GPL(check_media_bay);
-int check_media_bay_by_base(unsigned long base, int what)
+void lock_media_bay(struct macio_dev *baydev)
{
- int i;
-
- for (i=0; i<media_bay_count; i++)
- if (media_bays[i].mdev && base == (unsigned long) media_bays[i].cd_base) {
- if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up)
- return 0;
- media_bays[i].cd_index = -1;
- return -EINVAL;
- }
+ struct media_bay_info* bay;
- return -ENODEV;
+ if (baydev == NULL)
+ return;
+ bay = macio_get_drvdata(baydev);
+ if (bay == NULL)
+ return;
+ mutex_lock(&bay->lock);
+ bay->user_lock = 1;
}
-EXPORT_SYMBOL_GPL(check_media_bay_by_base);
+EXPORT_SYMBOL_GPL(lock_media_bay);
-int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
- int irq, ide_hwif_t *hwif)
+void unlock_media_bay(struct macio_dev *baydev)
{
- int i;
+ struct media_bay_info* bay;
- for (i=0; i<media_bay_count; i++) {
- struct media_bay_info* bay = &media_bays[i];
-
- if (bay->mdev && which_bay == bay->mdev->ofdev.node) {
- int timeout = 5000, index = hwif->index;
-
- mutex_lock(&bay->lock);
-
- bay->cd_port = hwif;
- bay->cd_base = (void __iomem *) base;
- bay->cd_irq = irq;
-
- if ((MB_CD != bay->content_id) || bay->state != mb_up) {
- mutex_unlock(&bay->lock);
- return 0;
- }
- printk(KERN_DEBUG "Registered ide%d for media bay %d\n", index, i);
- do {
- if (MB_IDE_READY(i)) {
- bay->cd_index = index;
- mutex_unlock(&bay->lock);
- return 0;
- }
- mdelay(1);
- } while(--timeout);
- printk(KERN_DEBUG "Timeount waiting IDE in bay %d\n", i);
- mutex_unlock(&bay->lock);
- return -ENODEV;
- }
+ if (baydev == NULL)
+ return;
+ bay = macio_get_drvdata(baydev);
+ if (bay == NULL)
+ return;
+ if (bay->user_lock) {
+ bay->user_lock = 0;
+ mutex_unlock(&bay->lock);
}
+}
+EXPORT_SYMBOL_GPL(unlock_media_bay);
- return -ENODEV;
+static int mb_broadcast_hotplug(struct device *dev, void *data)
+{
+ struct media_bay_info* bay = data;
+ struct macio_dev *mdev;
+ struct macio_driver *drv;
+ int state;
+
+ if (dev->bus != &macio_bus_type)
+ return 0;
+
+ state = bay->state == mb_up ? bay->content_id : MB_NO;
+ if (state == MB_FD1)
+ state = MB_FD;
+ mdev = to_macio_device(dev);
+ drv = to_macio_driver(dev->driver);
+ if (dev->driver && drv->mediabay_event)
+ drv->mediabay_event(mdev, state);
+ return 0;
}
-EXPORT_SYMBOL_GPL(media_bay_set_ide_infos);
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
static void media_bay_step(int i)
{
@@ -497,8 +474,8 @@ static void media_bay_step(int i)
if (bay->state != mb_powering_down)
poll_media_bay(bay);
- /* If timer expired or polling IDE busy, run state machine */
- if ((bay->state != mb_ide_waiting) && (bay->timer != 0)) {
+ /* If timer expired run state machine */
+ if (bay->timer != 0) {
bay->timer -= msecs_to_jiffies(MB_POLL_DELAY);
if (bay->timer > 0)
return;
@@ -508,100 +485,50 @@ static void media_bay_step(int i)
switch(bay->state) {
case mb_powering_up:
if (bay->ops->setup_bus(bay, bay->last_value) < 0) {
- MBDBG("mediabay%d: device not supported (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: device not supported (kind:%d)\n",
+ i, bay->content_id);
set_mb_power(bay, 0);
break;
}
bay->timer = msecs_to_jiffies(MB_RESET_DELAY);
bay->state = mb_enabling_bay;
- MBDBG("mediabay%d: enabling (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: enabling (kind:%d)\n", i, bay->content_id);
break;
case mb_enabling_bay:
bay->ops->un_reset(bay);
bay->timer = msecs_to_jiffies(MB_SETUP_DELAY);
bay->state = mb_resetting;
- MBDBG("mediabay%d: waiting reset (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: releasing bay reset (kind:%d)\n",
+ i, bay->content_id);
break;
case mb_resetting:
if (bay->content_id != MB_CD) {
- MBDBG("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: bay is up (kind:%d)\n", i,
+ bay->content_id);
bay->state = mb_up;
+ device_for_each_child(&bay->mdev->ofdev.dev,
+ bay, mb_broadcast_hotplug);
break;
}
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- MBDBG("mediabay%d: waiting IDE reset (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: releasing ATA reset (kind:%d)\n",
+ i, bay->content_id);
bay->ops->un_reset_ide(bay);
bay->timer = msecs_to_jiffies(MB_IDE_WAIT);
bay->state = mb_ide_resetting;
-#else
- printk(KERN_DEBUG "media-bay %d is ide (not compiled in kernel)\n", i);
- set_mb_power(bay, 0);
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
break;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
+
case mb_ide_resetting:
- bay->timer = msecs_to_jiffies(MB_IDE_TIMEOUT);
- bay->state = mb_ide_waiting;
- MBDBG("mediabay%d: waiting IDE ready (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id);
+ bay->state = mb_up;
+ device_for_each_child(&bay->mdev->ofdev.dev,
+ bay, mb_broadcast_hotplug);
break;
- case mb_ide_waiting:
- if (bay->cd_base == NULL) {
- bay->timer = 0;
- bay->state = mb_up;
- MBDBG("mediabay%d: up before IDE init\n", i);
- break;
- } else if (MB_IDE_READY(i)) {
- bay->timer = 0;
- bay->state = mb_up;
- if (bay->cd_index < 0) {
- printk("mediabay %d, registering IDE...\n", i);
- pmu_suspend();
- ide_port_scan(bay->cd_port);
- if (bay->cd_port->present)
- bay->cd_index = bay->cd_port->index;
- pmu_resume();
- }
- if (bay->cd_index == -1) {
- /* We eventually do a retry */
- bay->cd_retry++;
- printk("IDE register error\n");
- set_mb_power(bay, 0);
- } else {
- printk(KERN_DEBUG "media-bay %d is ide%d\n", i, bay->cd_index);
- MBDBG("mediabay %d IDE ready\n", i);
- }
- break;
- } else if (bay->timer > 0)
- bay->timer -= msecs_to_jiffies(MB_POLL_DELAY);
- if (bay->timer <= 0) {
- printk("\nIDE Timeout in bay %d !, IDE state is: 0x%02x\n",
- i, readb(bay->cd_base + 0x70));
- MBDBG("mediabay%d: nIDE Timeout !\n", i);
- set_mb_power(bay, 0);
- bay->timer = 0;
- }
- break;
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
+
case mb_powering_down:
bay->state = mb_empty;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- if (bay->cd_index >= 0) {
- printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i,
- bay->cd_index);
- ide_port_unregister_devices(bay->cd_port);
- bay->cd_index = -1;
- }
- if (bay->cd_retry) {
- if (bay->cd_retry > MAX_CD_RETRIES) {
- /* Should add an error sound (sort of beep in dmasound) */
- printk("\nmedia-bay %d, IDE device badly inserted or unrecognised\n", i);
- } else {
- /* Force a new power down/up sequence */
- bay->content_id = MB_NO;
- }
- }
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
- MBDBG("mediabay%d: end of power down\n", i);
+ device_for_each_child(&bay->mdev->ofdev.dev,
+ bay, mb_broadcast_hotplug);
+ pr_debug("mediabay%d: end of power down\n", i);
break;
}
}
@@ -676,11 +603,6 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de
bay->last_value = bay->ops->content(bay);
bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
bay->state = mb_empty;
- do {
- msleep(MB_POLL_DELAY);
- media_bay_step(i);
- } while((bay->state != mb_empty) &&
- (bay->state != mb_up));
/* Mark us ready by filling our mdev data */
macio_set_drvdata(mdev, bay);
@@ -725,7 +647,7 @@ static int media_bay_resume(struct macio_dev *mdev)
set_mb_power(bay, 0);
msleep(MB_POWER_DELAY);
if (bay->ops->content(bay) != bay->content_id) {
- printk("mediabay%d: content changed during sleep...\n", bay->index);
+ printk("mediabay%d: Content changed during sleep...\n", bay->index);
mutex_unlock(&bay->lock);
return 0;
}
@@ -733,9 +655,6 @@ static int media_bay_resume(struct macio_dev *mdev)
bay->last_value = bay->content_id;
bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- bay->cd_retry = 0;
-#endif
do {
msleep(MB_POLL_DELAY);
media_bay_step(bay->index);
@@ -823,9 +742,6 @@ static int __init media_bay_init(void)
for (i=0; i<MAX_BAYS; i++) {
memset((char *)&media_bays[i], 0, sizeof(struct media_bay_info));
media_bays[i].content_id = -1;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- media_bays[i].cd_index = -1;
-#endif
}
if (!machine_is(powermac))
return 0;
generated by cgit v1.1 at 2024-12-26 18:16:26 +0000