diff options
Diffstat (limited to 'drivers/mmc/core/sd.c')
| -rw-r--r-- | drivers/mmc/core/sd.c | 152 |
1 files changed, 126 insertions, 26 deletions
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 8285842..5b7c998 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -400,6 +400,98 @@ out: return err; } +static int sd_select_driver_type(struct mmc_card *card, u8 *status) +{ + int host_drv_type = 0, card_drv_type = 0; + int err; + + /* + * If the host doesn't support any of the Driver Types A,C or D, + * default Driver Type B is used. + */ + if (!(card->host->caps & (MMC_CAP_DRIVER_TYPE_A | MMC_CAP_DRIVER_TYPE_C + | MMC_CAP_DRIVER_TYPE_D))) + return 0; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_A) { + host_drv_type = MMC_SET_DRIVER_TYPE_A; + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_A) + card_drv_type = MMC_SET_DRIVER_TYPE_A; + else if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_B) + card_drv_type = MMC_SET_DRIVER_TYPE_B; + else if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) + card_drv_type = MMC_SET_DRIVER_TYPE_C; + } else if (card->host->caps & MMC_CAP_DRIVER_TYPE_C) { + host_drv_type = MMC_SET_DRIVER_TYPE_C; + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) + card_drv_type = MMC_SET_DRIVER_TYPE_C; + } else if (!(card->host->caps & MMC_CAP_DRIVER_TYPE_D)) { + /* + * If we are here, that means only the default driver type + * B is supported by the host. + */ + host_drv_type = MMC_SET_DRIVER_TYPE_B; + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_B) + card_drv_type = MMC_SET_DRIVER_TYPE_B; + else if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) + card_drv_type = MMC_SET_DRIVER_TYPE_C; + } + + err = mmc_sd_switch(card, 1, 2, card_drv_type, status); + if (err) + return err; + + if ((status[15] & 0xF) != card_drv_type) { + printk(KERN_WARNING "%s: Problem setting driver strength!\n", + mmc_hostname(card->host)); + return 0; + } + + mmc_set_driver_type(card->host, host_drv_type); + + return 0; +} + +/* + * UHS-I specific initialization procedure + */ +static int mmc_sd_init_uhs_card(struct mmc_card *card) +{ + int err; + u8 *status; + + if (!card->scr.sda_spec3) + return 0; + + if (!(card->csd.cmdclass & CCC_SWITCH)) + return 0; + + status = kmalloc(64, GFP_KERNEL); + if (!status) { + printk(KERN_ERR "%s: could not allocate a buffer for " + "switch capabilities.\n", mmc_hostname(card->host)); + return -ENOMEM; + } + + /* Set 4-bit bus width */ + if ((card->host->caps & MMC_CAP_4_BIT_DATA) && + (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { + err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4); + if (err) + goto out; + + mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); + } + + /* Set the driver strength for the card */ + err = sd_select_driver_type(card, status); + +out: + kfree(status); + + return err; +} + MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1], card->raw_cid[2], card->raw_cid[3]); MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1], @@ -448,10 +540,9 @@ struct device_type sd_type = { /* * Fetch CID from card. */ -int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid) +int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr) { int err; - u32 rocr; /* * Since we're changing the OCR value, we seem to @@ -485,7 +576,7 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid) ocr |= SD_OCR_XPC; try_again: - err = mmc_send_app_op_cond(host, ocr, &rocr); + err = mmc_send_app_op_cond(host, ocr, rocr); if (err) return err; @@ -493,7 +584,8 @@ try_again: * In case CCS and S18A in the response is set, start Signal Voltage * Switch procedure. SPI mode doesn't support CMD11. */ - if (!mmc_host_is_spi(host) && ((rocr & 0x41000000) == 0x41000000)) { + if (!mmc_host_is_spi(host) && rocr && + ((*rocr & 0x41000000) == 0x41000000)) { err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); if (err) { ocr &= ~SD_OCR_S18R; @@ -628,11 +720,12 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, struct mmc_card *card; int err; u32 cid[4]; + u32 rocr = 0; BUG_ON(!host); WARN_ON(!host->claimed); - err = mmc_sd_get_cid(host, ocr, cid); + err = mmc_sd_get_cid(host, ocr, cid, &rocr); if (err) return err; @@ -685,30 +778,37 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, if (err) goto free_card; - /* - * Attempt to change to high-speed (if supported) - */ - err = mmc_sd_switch_hs(card); - if (err > 0) - mmc_sd_go_highspeed(card); - else if (err) - goto free_card; - - /* - * Set bus speed. - */ - mmc_set_clock(host, mmc_sd_get_max_clock(card)); - - /* - * Switch to wider bus (if supported). - */ - if ((host->caps & MMC_CAP_4_BIT_DATA) && - (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { - err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4); + /* Initialization sequence for UHS-I cards */ + if (rocr & SD_ROCR_S18A) { + err = mmc_sd_init_uhs_card(card); if (err) goto free_card; + } else { + /* + * Attempt to change to high-speed (if supported) + */ + err = mmc_sd_switch_hs(card); + if (err > 0) + mmc_sd_go_highspeed(card); + else if (err) + goto free_card; + + /* + * Set bus speed. + */ + mmc_set_clock(host, mmc_sd_get_max_clock(card)); - mmc_set_bus_width(host, MMC_BUS_WIDTH_4); + /* + * Switch to wider bus (if supported). + */ + if ((host->caps & MMC_CAP_4_BIT_DATA) && + (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { + err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4); + if (err) + goto free_card; + + mmc_set_bus_width(host, MMC_BUS_WIDTH_4); + } } host->card = card; |