diff options
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.h')
| -rw-r--r-- | drivers/net/bnx2x/bnx2x_link.h | 34 |
1 files changed, 21 insertions, 13 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h index bedab1a..92f36b6 100644 --- a/drivers/net/bnx2x/bnx2x_link.h +++ b/drivers/net/bnx2x/bnx2x_link.h @@ -1,4 +1,4 @@ -/* Copyright 2008-2010 Broadcom Corporation +/* Copyright 2008-2011 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you @@ -33,7 +33,7 @@ #define BNX2X_FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH #define BNX2X_FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE -#define SPEED_AUTO_NEG 0 +#define SPEED_AUTO_NEG 0 #define SPEED_12000 12000 #define SPEED_12500 12500 #define SPEED_13000 13000 @@ -44,8 +44,8 @@ #define SFP_EEPROM_VENDOR_NAME_SIZE 16 #define SFP_EEPROM_VENDOR_OUI_ADDR 0x25 #define SFP_EEPROM_VENDOR_OUI_SIZE 3 -#define SFP_EEPROM_PART_NO_ADDR 0x28 -#define SFP_EEPROM_PART_NO_SIZE 16 +#define SFP_EEPROM_PART_NO_ADDR 0x28 +#define SFP_EEPROM_PART_NO_SIZE 16 #define PWR_FLT_ERR_MSG_LEN 250 #define XGXS_EXT_PHY_TYPE(ext_phy_config) \ @@ -62,7 +62,7 @@ #define SINGLE_MEDIA(params) (params->num_phys == 2) /* Dual Media board contains two external phy with different media */ #define DUAL_MEDIA(params) (params->num_phys == 3) -#define FW_PARAM_MDIO_CTRL_OFFSET 16 +#define FW_PARAM_MDIO_CTRL_OFFSET 16 #define FW_PARAM_SET(phy_addr, phy_type, mdio_access) \ (phy_addr | phy_type | mdio_access << FW_PARAM_MDIO_CTRL_OFFSET) @@ -201,12 +201,14 @@ struct link_params { /* Default / User Configuration */ u8 loopback_mode; -#define LOOPBACK_NONE 0 -#define LOOPBACK_EMAC 1 -#define LOOPBACK_BMAC 2 +#define LOOPBACK_NONE 0 +#define LOOPBACK_EMAC 1 +#define LOOPBACK_BMAC 2 #define LOOPBACK_XGXS 3 #define LOOPBACK_EXT_PHY 4 -#define LOOPBACK_EXT 5 +#define LOOPBACK_EXT 5 +#define LOOPBACK_UMAC 6 +#define LOOPBACK_XMAC 7 /* Device parameters */ u8 mac_addr[6]; @@ -230,10 +232,11 @@ struct link_params { /* Phy register parameter */ u32 chip_id; + /* features */ u32 feature_config_flags; -#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0) -#define FEATURE_CONFIG_PFC_ENABLED (1<<1) -#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2) +#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0) +#define FEATURE_CONFIG_PFC_ENABLED (1<<1) +#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2) #define FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY (1<<3) /* Will be populated during common init */ struct bnx2x_phy phy[MAX_PHYS]; @@ -334,6 +337,11 @@ void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port); /* Reset the external of SFX7101 */ void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy); +/* Read "byte_cnt" bytes from address "addr" from the SFP+ EEPROM */ +u8 bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, + struct link_params *params, u16 addr, + u8 byte_cnt, u8 *o_buf); + void bnx2x_hw_reset_phy(struct link_params *params); /* Checks if HW lock is required for this phy/board type */ @@ -379,7 +387,7 @@ void bnx2x_ets_disabled(struct link_params *params); /* Used to configure the ETS to BW limited */ void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw, - const u32 cos1_bw); + const u32 cos1_bw); /* Used to configure the ETS to strict */ u8 bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos); |