diff options
Diffstat (limited to 'drivers/net/e1000e/ich8lan.c')
| -rw-r--r-- | drivers/net/e1000e/ich8lan.c | 48 |
1 files changed, 37 insertions, 11 deletions
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index fb46974..ce1dbfd 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -140,6 +140,11 @@ #define I82579_LPI_CTRL PHY_REG(772, 20) #define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +/* EMI Registers */ +#define I82579_EMI_ADDR 0x10 +#define I82579_EMI_DATA 0x11 +#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ + /* Strapping Option Register - RO */ #define E1000_STRAP 0x0000C #define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 @@ -302,9 +307,9 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) * the interconnect to PCIe mode. */ fwsm = er32(FWSM); - if (!(fwsm & E1000_ICH_FWSM_FW_VALID)) { + if (!(fwsm & E1000_ICH_FWSM_FW_VALID) && !e1000_check_reset_block(hw)) { ctrl = er32(CTRL); - ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE; + ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE; ctrl &= ~E1000_CTRL_LANPHYPC_VALUE; ew32(CTRL, ctrl); udelay(10); @@ -331,7 +336,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) goto out; /* Ungate automatic PHY configuration on non-managed 82579 */ - if ((hw->mac.type == e1000_pch2lan) && + if ((hw->mac.type == e1000_pch2lan) && !(fwsm & E1000_ICH_FWSM_FW_VALID)) { msleep(10); e1000_gate_hw_phy_config_ich8lan(hw, false); @@ -366,7 +371,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) case e1000_phy_82579: phy->ops.check_polarity = e1000_check_polarity_82577; phy->ops.force_speed_duplex = - e1000_phy_force_speed_duplex_82577; + e1000_phy_force_speed_duplex_82577; phy->ops.get_cable_length = e1000_get_cable_length_82577; phy->ops.get_info = e1000_get_phy_info_82577; phy->ops.commit = e1000e_phy_sw_reset; @@ -753,7 +758,13 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) if (rc) return rc; - if (adapter->hw.phy.type == e1000_phy_ife) { + /* + * Disable Jumbo Frame support on parts with Intel 10/100 PHY or + * on parts with MACsec enabled in NVM (reflected in CTRL_EXT). + */ + if ((adapter->hw.phy.type == e1000_phy_ife) || + ((adapter->hw.mac.type >= e1000_pch2lan) && + (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) { adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES; adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN; } @@ -1723,11 +1734,25 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) /* Configure the LCD with the OEM bits in NVM */ ret_val = e1000_oem_bits_config_ich8lan(hw, true); - /* Ungate automatic PHY configuration on non-managed 82579 */ - if ((hw->mac.type == e1000_pch2lan) && - !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { - msleep(10); - e1000_gate_hw_phy_config_ich8lan(hw, false); + if (hw->mac.type == e1000_pch2lan) { + /* Ungate automatic PHY configuration on non-managed 82579 */ + if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { + msleep(10); + e1000_gate_hw_phy_config_ich8lan(hw, false); + } + + /* Set EEE LPI Update Timer to 200usec */ + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_ADDR, + I82579_LPI_UPDATE_TIMER); + if (ret_val) + goto release; + ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_DATA, + 0x1387); +release: + hw->phy.ops.release(hw); } out: @@ -2104,7 +2129,6 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) { union ich8_hws_flash_status hsfsts; s32 ret_val = -E1000_ERR_NVM; - s32 i = 0; hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); @@ -2140,6 +2164,8 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); ret_val = 0; } else { + s32 i = 0; + /* * Otherwise poll for sometime so the current * cycle has a chance to end before giving up. |