diff options
Diffstat (limited to 'drivers/net/wimax/i2400m')
-rw-r--r-- | drivers/net/wimax/i2400m/control.c | 27 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/driver.c | 167 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/i2400m-sdio.h | 5 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/i2400m.h | 82 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/netdev.c | 14 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/rx.c | 116 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/sdio-rx.c | 2 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/sdio-tx.c | 35 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/sdio.c | 7 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/tx.c | 155 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/usb-notif.c | 1 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/usb.c | 14 |
12 files changed, 486 insertions, 139 deletions
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c index 6180772..d86e8f3 100644 --- a/drivers/net/wimax/i2400m/control.c +++ b/drivers/net/wimax/i2400m/control.c @@ -83,6 +83,21 @@ #define D_SUBMODULE control #include "debug-levels.h" +static int i2400m_idle_mode_disabled;/* 0 (idle mode enabled) by default */ +module_param_named(idle_mode_disabled, i2400m_idle_mode_disabled, int, 0644); +MODULE_PARM_DESC(idle_mode_disabled, + "If true, the device will not enable idle mode negotiation " + "with the base station (when connected) to save power."); + +/* 0 (power saving enabled) by default */ +static int i2400m_power_save_disabled; +module_param_named(power_save_disabled, i2400m_power_save_disabled, int, 0644); +MODULE_PARM_DESC(power_save_disabled, + "If true, the driver will not tell the device to enter " + "power saving mode when it reports it is ready for it. " + "False by default (so the device is told to do power " + "saving)."); + int i2400m_passive_mode; /* 0 (passive mode disabled) by default */ module_param_named(passive_mode, i2400m_passive_mode, int, 0644); MODULE_PARM_DESC(passive_mode, @@ -346,7 +361,7 @@ void i2400m_report_tlv_system_state(struct i2400m *i2400m, i2400m_state); i2400m_reset(i2400m, I2400M_RT_WARM); break; - }; + } d_fnend(3, dev, "(i2400m %p ss %p [%u]) = void\n", i2400m, ss, i2400m_state); } @@ -395,7 +410,7 @@ void i2400m_report_tlv_media_status(struct i2400m *i2400m, default: dev_err(dev, "HW BUG? unknown media status %u\n", status); - }; + } d_fnend(3, dev, "(i2400m %p ms %p [%u]) = void\n", i2400m, ms, status); } @@ -524,7 +539,7 @@ void i2400m_report_hook(struct i2400m *i2400m, } } break; - }; + } d_fnend(3, dev, "(i2400m %p l3l4_hdr %p size %zu) = void\n", i2400m, l3l4_hdr, size); } @@ -567,8 +582,7 @@ void i2400m_msg_ack_hook(struct i2400m *i2400m, size); } break; - }; - return; + } } @@ -740,7 +754,7 @@ struct sk_buff *i2400m_msg_to_dev(struct i2400m *i2400m, break; default: ack_timeout = HZ; - }; + } if (unlikely(i2400m->trace_msg_from_user)) wimax_msg(&i2400m->wimax_dev, "echo", buf, buf_len, GFP_KERNEL); @@ -1419,5 +1433,4 @@ void i2400m_dev_shutdown(struct i2400m *i2400m) d_fnstart(3, dev, "(i2400m %p)\n", i2400m); d_fnend(3, dev, "(i2400m %p) = void\n", i2400m); - return; } diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c index 94dc83c..9c8b78d 100644 --- a/drivers/net/wimax/i2400m/driver.c +++ b/drivers/net/wimax/i2400m/driver.c @@ -75,25 +75,6 @@ #include "debug-levels.h" -int i2400m_idle_mode_disabled; /* 0 (idle mode enabled) by default */ -module_param_named(idle_mode_disabled, i2400m_idle_mode_disabled, int, 0644); -MODULE_PARM_DESC(idle_mode_disabled, - "If true, the device will not enable idle mode negotiation " - "with the base station (when connected) to save power."); - -int i2400m_rx_reorder_disabled; /* 0 (rx reorder enabled) by default */ -module_param_named(rx_reorder_disabled, i2400m_rx_reorder_disabled, int, 0644); -MODULE_PARM_DESC(rx_reorder_disabled, - "If true, RX reordering will be disabled."); - -int i2400m_power_save_disabled; /* 0 (power saving enabled) by default */ -module_param_named(power_save_disabled, i2400m_power_save_disabled, int, 0644); -MODULE_PARM_DESC(power_save_disabled, - "If true, the driver will not tell the device to enter " - "power saving mode when it reports it is ready for it. " - "False by default (so the device is told to do power " - "saving)."); - static char i2400m_debug_params[128]; module_param_string(debug, i2400m_debug_params, sizeof(i2400m_debug_params), 0644); @@ -395,6 +376,16 @@ retry: result = i2400m_dev_initialize(i2400m); if (result < 0) goto error_dev_initialize; + + /* We don't want any additional unwanted error recovery triggered + * from any other context so if anything went wrong before we come + * here, let's keep i2400m->error_recovery untouched and leave it to + * dev_reset_handle(). See dev_reset_handle(). */ + + atomic_dec(&i2400m->error_recovery); + /* Every thing works so far, ok, now we are ready to + * take error recovery if it's required. */ + /* At this point, reports will come for the device and set it * to the right state if it is different than UNINITIALIZED */ d_fnend(3, dev, "(net_dev %p [i2400m %p]) = %d\n", @@ -403,10 +394,10 @@ retry: error_dev_initialize: error_check_mac_addr: +error_fw_check: i2400m->ready = 0; wmb(); /* see i2400m->ready's documentation */ flush_workqueue(i2400m->work_queue); -error_fw_check: if (i2400m->bus_dev_stop) i2400m->bus_dev_stop(i2400m); error_bus_dev_start: @@ -436,7 +427,8 @@ int i2400m_dev_start(struct i2400m *i2400m, enum i2400m_bri bm_flags) result = __i2400m_dev_start(i2400m, bm_flags); if (result >= 0) { i2400m->updown = 1; - wmb(); /* see i2400m->updown's documentation */ + i2400m->alive = 1; + wmb();/* see i2400m->updown and i2400m->alive's doc */ } } mutex_unlock(&i2400m->init_mutex); @@ -497,7 +489,8 @@ void i2400m_dev_stop(struct i2400m *i2400m) if (i2400m->updown) { __i2400m_dev_stop(i2400m); i2400m->updown = 0; - wmb(); /* see i2400m->updown's documentation */ + i2400m->alive = 0; + wmb(); /* see i2400m->updown and i2400m->alive's doc */ } mutex_unlock(&i2400m->init_mutex); } @@ -617,12 +610,12 @@ int i2400m_post_reset(struct i2400m *i2400m) error_dev_start: if (i2400m->bus_release) i2400m->bus_release(i2400m); -error_bus_setup: /* even if the device was up, it could not be recovered, so we * mark it as down. */ i2400m->updown = 0; wmb(); /* see i2400m->updown's documentation */ mutex_unlock(&i2400m->init_mutex); +error_bus_setup: d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result); return result; } @@ -669,6 +662,9 @@ void __i2400m_dev_reset_handle(struct work_struct *ws) d_fnstart(3, dev, "(ws %p i2400m %p reason %s)\n", ws, i2400m, reason); + i2400m->boot_mode = 1; + wmb(); /* Make sure i2400m_msg_to_dev() sees boot_mode */ + result = 0; if (mutex_trylock(&i2400m->init_mutex) == 0) { /* We are still in i2400m_dev_start() [let it fail] or @@ -679,39 +675,68 @@ void __i2400m_dev_reset_handle(struct work_struct *ws) complete(&i2400m->msg_completion); goto out; } - if (i2400m->updown == 0) { - dev_info(dev, "%s: device is down, doing nothing\n", reason); - goto out_unlock; - } + dev_err(dev, "%s: reinitializing driver\n", reason); - __i2400m_dev_stop(i2400m); - result = __i2400m_dev_start(i2400m, - I2400M_BRI_SOFT | I2400M_BRI_MAC_REINIT); - if (result < 0) { + rmb(); + if (i2400m->updown) { + __i2400m_dev_stop(i2400m); i2400m->updown = 0; wmb(); /* see i2400m->updown's documentation */ - dev_err(dev, "%s: cannot start the device: %d\n", - reason, result); - result = -EUCLEAN; } -out_unlock: + + if (i2400m->alive) { + result = __i2400m_dev_start(i2400m, + I2400M_BRI_SOFT | I2400M_BRI_MAC_REINIT); + if (result < 0) { + dev_err(dev, "%s: cannot start the device: %d\n", + reason, result); + result = -EUCLEAN; + if (atomic_read(&i2400m->bus_reset_retries) + >= I2400M_BUS_RESET_RETRIES) { + result = -ENODEV; + dev_err(dev, "tried too many times to " + "reset the device, giving up\n"); + } + } + } + if (i2400m->reset_ctx) { ctx->result = result; complete(&ctx->completion); } mutex_unlock(&i2400m->init_mutex); if (result == -EUCLEAN) { + /* + * We come here because the reset during operational mode + * wasn't successully done and need to proceed to a bus + * reset. For the dev_reset_handle() to be able to handle + * the reset event later properly, we restore boot_mode back + * to the state before previous reset. ie: just like we are + * issuing the bus reset for the first time + */ + i2400m->boot_mode = 0; + wmb(); + + atomic_inc(&i2400m->bus_reset_retries); /* ops, need to clean up [w/ init_mutex not held] */ result = i2400m_reset(i2400m, I2400M_RT_BUS); if (result >= 0) result = -ENODEV; + } else { + rmb(); + if (i2400m->alive) { + /* great, we expect the device state up and + * dev_start() actually brings the device state up */ + i2400m->updown = 1; + wmb(); + atomic_set(&i2400m->bus_reset_retries, 0); + } } out: i2400m_put(i2400m); kfree(iw); d_fnend(3, dev, "(ws %p i2400m %p reason %s) = void\n", ws, i2400m, reason); - return; } @@ -729,14 +754,72 @@ out: */ int i2400m_dev_reset_handle(struct i2400m *i2400m, const char *reason) { - i2400m->boot_mode = 1; - wmb(); /* Make sure i2400m_msg_to_dev() sees boot_mode */ return i2400m_schedule_work(i2400m, __i2400m_dev_reset_handle, GFP_ATOMIC, &reason, sizeof(reason)); } EXPORT_SYMBOL_GPL(i2400m_dev_reset_handle); + /* + * The actual work of error recovery. + * + * The current implementation of error recovery is to trigger a bus reset. + */ +static +void __i2400m_error_recovery(struct work_struct *ws) +{ + struct i2400m_work *iw = container_of(ws, struct i2400m_work, ws); + struct i2400m *i2400m = iw->i2400m; + + i2400m_reset(i2400m, I2400M_RT_BUS); + + i2400m_put(i2400m); + kfree(iw); + return; +} + +/* + * Schedule a work struct for error recovery. + * + * The intention of error recovery is to bring back the device to some + * known state whenever TX sees -110 (-ETIMEOUT) on copying the data to + * the device. The TX failure could mean a device bus stuck, so the current + * error recovery implementation is to trigger a bus reset to the device + * and hopefully it can bring back the device. + * + * The actual work of error recovery has to be in a thread context because + * it is kicked off in the TX thread (i2400ms->tx_workqueue) which is to be + * destroyed by the error recovery mechanism (currently a bus reset). + * + * Also, there may be already a queue of TX works that all hit + * the -ETIMEOUT error condition because the device is stuck already. + * Since bus reset is used as the error recovery mechanism and we don't + * want consecutive bus resets simply because the multiple TX works + * in the queue all hit the same device erratum, the flag "error_recovery" + * is introduced for preventing unwanted consecutive bus resets. + * + * Error recovery shall only be invoked again if previous one was completed. + * The flag error_recovery is set when error recovery mechanism is scheduled, + * and is checked when we need to schedule another error recovery. If it is + * in place already, then we shouldn't schedule another one. + */ +void i2400m_error_recovery(struct i2400m *i2400m) +{ + struct device *dev = i2400m_dev(i2400m); + + if (atomic_add_return(1, &i2400m->error_recovery) == 1) { + if (i2400m_schedule_work(i2400m, __i2400m_error_recovery, + GFP_ATOMIC, NULL, 0) < 0) { + dev_err(dev, "run out of memory for " + "scheduling an error recovery ?\n"); + atomic_dec(&i2400m->error_recovery); + } + } else + atomic_dec(&i2400m->error_recovery); + return; +} +EXPORT_SYMBOL_GPL(i2400m_error_recovery); + /* * Alloc the command and ack buffers for boot mode * @@ -803,6 +886,13 @@ void i2400m_init(struct i2400m *i2400m) mutex_init(&i2400m->init_mutex); /* wake_tx_ws is initialized in i2400m_tx_setup() */ + atomic_set(&i2400m->bus_reset_retries, 0); + + i2400m->alive = 0; + + /* initialize error_recovery to 1 for denoting we + * are not yet ready to take any error recovery */ + atomic_set(&i2400m->error_recovery, 1); } EXPORT_SYMBOL_GPL(i2400m_init); @@ -996,7 +1086,6 @@ void __exit i2400m_driver_exit(void) /* for scheds i2400m_dev_reset_handle() */ flush_scheduled_work(); i2400m_barker_db_exit(); - return; } module_exit(i2400m_driver_exit); diff --git a/drivers/net/wimax/i2400m/i2400m-sdio.h b/drivers/net/wimax/i2400m/i2400m-sdio.h index b9c4bed..360d4fb 100644 --- a/drivers/net/wimax/i2400m/i2400m-sdio.h +++ b/drivers/net/wimax/i2400m/i2400m-sdio.h @@ -99,7 +99,10 @@ enum { * * @tx_workqueue: workqeueue used for data TX; we don't use the * system's workqueue as that might cause deadlocks with code in - * the bus-generic driver. + * the bus-generic driver. The read/write operation to the queue + * is protected with spinlock (tx_lock in struct i2400m) to avoid + * the queue being destroyed in the middle of a the queue read/write + * operation. * * @debugfs_dentry: dentry for the SDIO specific debugfs files * diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index 820b128..fa74777 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -160,6 +160,16 @@ #include <linux/wimax/i2400m.h> #include <asm/byteorder.h> +enum { +/* netdev interface */ + /* + * Out of NWG spec (R1_v1.2.2), 3.3.3 ASN Bearer Plane MTU Size + * + * The MTU is 1400 or less + */ + I2400M_MAX_MTU = 1400, +}; + /* Misc constants */ enum { /* Size of the Boot Mode Command buffer */ @@ -167,6 +177,11 @@ enum { I2400M_BM_ACK_BUF_SIZE = 256, }; +enum { + /* Maximum number of bus reset can be retried */ + I2400M_BUS_RESET_RETRIES = 3, +}; + /** * struct i2400m_poke_table - Hardware poke table for the Intel 2400m * @@ -227,6 +242,11 @@ struct i2400m_barker_db; * so we have a tx_blk_size variable that the bus layer sets to * tell the engine how much of that we need. * + * @bus_tx_room_min: [fill] Minimum room required while allocating + * TX queue's buffer space for message header. SDIO requires + * 224 bytes and USB 16 bytes. Refer bus specific driver code + * for details. + * * @bus_pl_size_max: [fill] Maximum payload size. * * @bus_setup: [optional fill] Function called by the bus-generic code @@ -397,7 +417,7 @@ struct i2400m_barker_db; * * @tx_size_max: biggest TX message sent. * - * @rx_lock: spinlock to protect RX members + * @rx_lock: spinlock to protect RX members and rx_roq_refcount. * * @rx_pl_num: total number of payloads received * @@ -421,6 +441,10 @@ struct i2400m_barker_db; * delivered. Then the driver can release them to the host. See * drivers/net/i2400m/rx.c for details. * + * @rx_roq_refcount: refcount rx_roq. This refcounts any access to + * rx_roq thus preventing rx_roq being destroyed when rx_roq + * is being accessed. rx_roq_refcount is protected by rx_lock. + * * @rx_reports: reports received from the device that couldn't be * processed because the driver wasn't still ready; when ready, * they are pulled from here and chewed. @@ -507,6 +531,38 @@ struct i2400m_barker_db; * same. * * @pm_notifier: used to register for PM events + * + * @bus_reset_retries: counter for the number of bus resets attempted for + * this boot. It's not for tracking the number of bus resets during + * the whole driver life cycle (from insmod to rmmod) but for the + * number of dev_start() executed until dev_start() returns a success + * (ie: a good boot means a dev_stop() followed by a successful + * dev_start()). dev_reset_handler() increments this counter whenever + * it is triggering a bus reset. It checks this counter to decide if a + * subsequent bus reset should be retried. dev_reset_handler() retries + * the bus reset until dev_start() succeeds or the counter reaches + * I2400M_BUS_RESET_RETRIES. The counter is cleared to 0 in + * dev_reset_handle() when dev_start() returns a success, + * ie: a successul boot is completed. + * + * @alive: flag to denote if the device *should* be alive. This flag is + * everything like @updown (see doc for @updown) except reflecting + * the device state *we expect* rather than the actual state as denoted + * by @updown. It is set 1 whenever @updown is set 1 in dev_start(). + * Then the device is expected to be alive all the time + * (i2400m->alive remains 1) until the driver is removed. Therefore + * all the device reboot events detected can be still handled properly + * by either dev_reset_handle() or .pre_reset/.post_reset as long as + * the driver presents. It is set 0 along with @updown in dev_stop(). + * + * @error_recovery: flag to denote if we are ready to take an error recovery. + * 0 for ready to take an error recovery; 1 for not ready. It is + * initialized to 1 while probe() since we don't tend to take any error + * recovery during probe(). It is decremented by 1 whenever dev_start() + * succeeds to indicate we are ready to take error recovery from now on. + * It is checked every time we wanna schedule an error recovery. If an + * error recovery is already in place (error_recovery was set 1), we + * should not schedule another one until the last one is done. */ struct i2400m { struct wimax_dev wimax_dev; /* FIRST! See doc */ @@ -522,6 +578,7 @@ struct i2400m { wait_queue_head_t state_wq; /* Woken up when on state updates */ size_t bus_tx_block_size; + size_t bus_tx_room_min; size_t bus_pl_size_max; unsigned bus_bm_retries; @@ -550,10 +607,12 @@ struct i2400m { tx_num, tx_size_acc, tx_size_min, tx_size_max; /* RX stuff */ - spinlock_t rx_lock; /* protect RX state */ + /* protect RX state and rx_roq_refcount */ + spinlock_t rx_lock; unsigned rx_pl_num, rx_pl_max, rx_pl_min, rx_num, rx_size_acc, rx_size_min, rx_size_max; - struct i2400m_roq *rx_roq; /* not under rx_lock! */ + struct i2400m_roq *rx_roq; /* access is refcounted */ + struct kref rx_roq_refcount; /* refcount access to rx_roq */ u8 src_mac_addr[ETH_HLEN]; struct list_head rx_reports; /* under rx_lock! */ struct work_struct rx_report_ws; @@ -581,6 +640,16 @@ struct i2400m { struct i2400m_barker_db *barker; struct notifier_block pm_notifier; + + /* counting bus reset retries in this boot */ + atomic_t bus_reset_retries; + + /* if the device is expected to be alive */ + unsigned alive; + + /* 0 if we are ready for error recovery; 1 if not ready */ + atomic_t error_recovery; + }; @@ -803,6 +872,7 @@ void i2400m_put(struct i2400m *i2400m) extern int i2400m_dev_reset_handle(struct i2400m *, const char *); extern int i2400m_pre_reset(struct i2400m *); extern int i2400m_post_reset(struct i2400m *); +extern void i2400m_error_recovery(struct i2400m *); /* * _setup()/_release() are called by the probe/disconnect functions of @@ -815,7 +885,6 @@ extern int i2400m_rx(struct i2400m *, struct sk_buff *); extern struct i2400m_msg_hdr *i2400m_tx_msg_get(struct i2400m *, size_t *); extern void i2400m_tx_msg_sent(struct i2400m *); -extern int i2400m_power_save_disabled; /* * Utility functions @@ -922,10 +991,5 @@ extern int i2400m_barker_db_init(const char *); extern void i2400m_barker_db_exit(void); -/* Module parameters */ - -extern int i2400m_idle_mode_disabled; -extern int i2400m_rx_reorder_disabled; - #endif /* #ifndef __I2400M_H__ */ diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c index b811c2f..94742e1 100644 --- a/drivers/net/wimax/i2400m/netdev.c +++ b/drivers/net/wimax/i2400m/netdev.c @@ -84,17 +84,15 @@ enum { /* netdev interface */ - /* - * Out of NWG spec (R1_v1.2.2), 3.3.3 ASN Bearer Plane MTU Size - * - * The MTU is 1400 or less - */ - I2400M_MAX_MTU = 1400, /* 20 secs? yep, this is the maximum timeout that the device * might take to get out of IDLE / negotiate it with the base * station. We add 1sec for good measure. */ I2400M_TX_TIMEOUT = 21 * HZ, - I2400M_TX_QLEN = 5, + /* + * Experimentation has determined that, 20 to be a good value + * for minimizing the jitter in the throughput. + */ + I2400M_TX_QLEN = 20, }; @@ -255,7 +253,6 @@ void i2400m_net_wake_stop(struct i2400m *i2400m) kfree_skb(wake_tx_skb); } d_fnend(3, dev, "(i2400m %p) = void\n", i2400m); - return; } @@ -434,7 +431,6 @@ void i2400m_tx_timeout(struct net_device *net_dev) * this, there might be data pending to be sent or not... */ net_dev->stats.tx_errors++; - return; } diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c index fa2e11e..6537593 100644 --- a/drivers/net/wimax/i2400m/rx.c +++ b/drivers/net/wimax/i2400m/rx.c @@ -155,6 +155,11 @@ #define D_SUBMODULE rx #include "debug-levels.h" +static int i2400m_rx_reorder_disabled; /* 0 (rx reorder enabled) by default */ +module_param_named(rx_reorder_disabled, i2400m_rx_reorder_disabled, int, 0644); +MODULE_PARM_DESC(rx_reorder_disabled, + "If true, RX reordering will be disabled."); + struct i2400m_report_hook_args { struct sk_buff *skb_rx; const struct i2400m_l3l4_hdr *l3l4_hdr; @@ -300,20 +305,18 @@ void i2400m_rx_ctl_ack(struct i2400m *i2400m, d_printf(1, dev, "Huh? waiter for command reply cancelled\n"); goto error_waiter_cancelled; } - if (ack_skb == NULL) { + if (IS_ERR(ack_skb)) dev_err(dev, "CMD/GET/SET ack: cannot allocate SKB\n"); - i2400m->ack_skb = ERR_PTR(-ENOMEM); - } else - i2400m->ack_skb = ack_skb; + i2400m->ack_skb = ack_skb; spin_unlock_irqrestore(&i2400m->rx_lock, flags); complete(&i2400m->msg_completion); return; error_waiter_cancelled: - kfree_skb(ack_skb); + if (!IS_ERR(ack_skb)) + kfree_skb(ack_skb); error_no_waiter: spin_unlock_irqrestore(&i2400m->rx_lock, flags); - return; } @@ -718,7 +721,6 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq, out: d_fnend(4, dev, "(i2400m %p roq %p skb %p sn %u nsn %d) = void\n", i2400m, roq, skb, sn, nsn); - return; } @@ -743,12 +745,12 @@ unsigned __i2400m_roq_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq, unsigned new_nws, nsn_itr; new_nws = __i2400m_roq_nsn(roq, sn); - if (unlikely(new_nws >= 1024) && d_test(1)) { - dev_err(dev, "SW BUG? __update_ws new_nws %u (sn %u ws %u)\n", - new_nws, sn, roq->ws); - WARN_ON(1); - i2400m_roq_log_dump(i2400m, roq); - } + /* + * For type 2(update_window_start) rx messages, there is no + * need to check if the normalized sequence number is greater 1023. + * Simply insert and deliver all packets to the host up to the + * window start. + */ skb_queue_walk_safe(&roq->queue, skb_itr, tmp_itr) { roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb; nsn_itr = __i2400m_roq_nsn(roq, roq_data_itr->sn); @@ -798,7 +800,6 @@ void i2400m_roq_reset(struct i2400m *i2400m, struct i2400m_roq *roq) } roq->ws = 0; d_fnend(2, dev, "(i2400m %p roq %p) = void\n", i2400m, roq); - return; } @@ -837,7 +838,6 @@ void i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq, } d_fnend(2, dev, "(i2400m %p roq %p skb %p lbn %u) = void\n", i2400m, roq, skb, lbn); - return; } @@ -863,7 +863,6 @@ void i2400m_roq_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq, i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_WS, old_ws, len, sn, nsn, roq->ws); d_fnstart(2, dev, "(i2400m %p roq %p sn %u) = void\n", i2400m, roq, sn); - return; } @@ -890,33 +889,52 @@ void i2400m_roq_queue_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq, i2400m, roq, skb, sn); len = skb_queue_len(&roq->queue); nsn = __i2400m_roq_nsn(roq, sn); + /* + * For type 3(queue_update_window_start) rx messages, there is no + * need to check if the normalized sequence number is greater 1023. + * Simply insert and deliver all packets to the host up to the + * window start. + */ old_ws = roq->ws; - if (unlikely(nsn >= 1024)) { - dev_err(dev, "SW BUG? queue_update_ws nsn %u (sn %u ws %u)\n", - nsn, sn, roq->ws); - i2400m_roq_log_dump(i2400m, roq); - i2400m_reset(i2400m, I2400M_RT_WARM); - } else { - /* if the queue is empty, don't bother as we'd queue - * it and inmediately unqueue it -- just deliver it */ - if (len == 0) { - struct i2400m_roq_data *roq_data; - roq_data = (struct i2400m_roq_data *) &skb->cb; - i2400m_net_erx(i2400m, skb, roq_data->cs); - } - else - __i2400m_roq_queue(i2400m, roq, skb, sn, nsn); - __i2400m_roq_update_ws(i2400m, roq, sn + 1); - i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET_WS, - old_ws, len, sn, nsn, roq->ws); - } + /* If the queue is empty, don't bother as we'd queue + * it and immediately unqueue it -- just deliver it. + */ + if (len == 0) { + struct i2400m_roq_data *roq_data; + roq_data = (struct i2400m_roq_data *) &skb->cb; + i2400m_net_erx(i2400m, skb, roq_data->cs); + } else + __i2400m_roq_queue(i2400m, roq, skb, sn, nsn); + + __i2400m_roq_update_ws(i2400m, roq, sn + 1); + i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET_WS, + old_ws, len, sn, nsn, roq->ws); + d_fnend(2, dev, "(i2400m %p roq %p skb %p sn %u) = void\n", i2400m, roq, skb, sn); - return; } /* + * This routine destroys the memory allocated for rx_roq, when no + * other thread is accessing it. Access to rx_roq is refcounted by + * rx_roq_refcount, hence memory allocated must be destroyed when + * rx_roq_refcount becomes zero. This routine gets executed when + * rx_roq_refcount becomes zero. + */ +void i2400m_rx_roq_destroy(struct kref *ref) +{ + unsigned itr; + struct i2400m *i2400m + = container_of(ref, struct i2400m, rx_roq_refcount); + for (itr = 0; itr < I2400M_RO_CIN + 1; itr++) + __skb_queue_purge(&i2400m->rx_roq[itr].queue); + kfree(i2400m->rx_roq[0].log); + kfree(i2400m->rx_roq); + i2400m->rx_roq = NULL; +} + +/* * Receive and send up an extended data packet * * @i2400m: device descriptor @@ -969,6 +987,7 @@ void i2400m_rx_edata(struct i2400m *i2400m, struct sk_buff *skb_rx, unsigned ro_needed, ro_type, ro_cin, ro_sn; struct i2400m_roq *roq; struct i2400m_roq_data *roq_data; + unsigned long flags; BUILD_BUG_ON(ETH_HLEN > sizeof(*hdr)); @@ -1007,7 +1026,16 @@ void i2400m_rx_edata(struct i2400m *i2400m, struct sk_buff *skb_rx, ro_cin = (reorder >> I2400M_RO_CIN_SHIFT) & I2400M_RO_CIN; ro_sn = (reorder >> I2400M_RO_SN_SHIFT) & I2400M_RO_SN; + spin_lock_irqsave(&i2400m->rx_lock, flags); roq = &i2400m->rx_roq[ro_cin]; + if (roq == NULL) { + kfree_skb(skb); /* rx_roq is already destroyed */ + spin_unlock_irqrestore(&i2400m->rx_lock, flags); + goto error; + } + kref_get(&i2400m->rx_roq_refcount); + spin_unlock_irqrestore(&i2400m->rx_lock, flags); + roq_data = (struct i2400m_roq_data *) &skb->cb; roq_data->sn = ro_sn; roq_data->cs = cs; @@ -1034,6 +1062,10 @@ void i2400m_rx_edata(struct i2400m *i2400m, struct sk_buff *skb_rx, default: dev_err(dev, "HW BUG? unknown reorder type %u\n", ro_type); } + + spin_lock_irqsave(&i2400m->rx_lock, flags); + kref_put(&i2400m->rx_roq_refcount, i2400m_rx_roq_destroy); + spin_unlock_irqrestore(&i2400m->rx_lock, flags); } else i2400m_net_erx(i2400m, skb, cs); @@ -1041,7 +1073,6 @@ error_skb_clone: error: d_fnend(2, dev, "(i2400m %p skb_rx %p single %u payload %p " "size %zu) = void\n", i2400m, skb_rx, single_last, payload, size); - return; } @@ -1344,6 +1375,7 @@ int i2400m_rx_setup(struct i2400m *i2400m) __i2400m_roq_init(&i2400m->rx_roq[itr]); i2400m->rx_roq[itr].log = &rd[itr]; } + kref_init(&i2400m->rx_roq_refcount); } return 0; @@ -1357,12 +1389,12 @@ error_roq_alloc: /* Tear down the RX queue and infrastructure */ void i2400m_rx_release(struct i2400m *i2400m) { + unsigned long flags; + if (i2400m->rx_reorder) { - unsigned itr; - for(itr = 0; itr < I2400M_RO_CIN + 1; itr++) - __skb_queue_purge(&i2400m->rx_roq[itr].queue); - kfree(i2400m->rx_roq[0].log); - kfree(i2400m->rx_roq); + spin_lock_irqsave(&i2400m->rx_lock, flags); + kref_put(&i2400m->rx_roq_refcount, i2400m_rx_roq_destroy); + spin_unlock_irqrestore(&i2400m->rx_lock, flags); } /* at this point, nothing can be received... */ i2400m_report_hook_flush(i2400m); diff --git a/drivers/net/wimax/i2400m/sdio-rx.c b/drivers/net/wimax/i2400m/sdio-rx.c index d619da3..8b809c2 100644 --- a/drivers/net/wimax/i2400m/sdio-rx.c +++ b/drivers/net/wimax/i2400m/sdio-rx.c @@ -197,7 +197,6 @@ error_alloc_skb: error_get_size: error_bad_size: d_fnend(7, dev, "(i2400ms %p) = %d\n", i2400ms, ret); - return; } @@ -229,7 +228,6 @@ void i2400ms_irq(struct sdio_func *func) i2400ms_rx(i2400ms); error_no_irq: d_fnend(6, dev, "(i2400ms %p) = void\n", i2400ms); - return; } diff --git a/drivers/net/wimax/i2400m/sdio-tx.c b/drivers/net/wimax/i2400m/sdio-tx.c index de66d06..b53cd1c 100644 --- a/drivers/net/wimax/i2400m/sdio-tx.c +++ b/drivers/net/wimax/i2400m/sdio-tx.c @@ -98,6 +98,10 @@ void i2400ms_tx_submit(struct work_struct *ws) tx_msg_size, result); } + if (result == -ETIMEDOUT) { + i2400m_error_recovery(i2400m); + break; + } d_printf(2, dev, "TX: %zub submitted\n", tx_msg_size); } @@ -114,13 +118,17 @@ void i2400ms_bus_tx_kick(struct i2400m *i2400m) { struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m); struct device *dev = &i2400ms->func->dev; + unsigned long flags; d_fnstart(3, dev, "(i2400m %p) = void\n", i2400m); /* schedule tx work, this is because tx may block, therefore * it has to run in a thread context. */ - queue_work(i2400ms->tx_workqueue, &i2400ms->tx_worker); + spin_lock_irqsave(&i2400m->tx_lock, flags); + if (i2400ms->tx_workqueue != NULL) + queue_work(i2400ms->tx_workqueue, &i2400ms->tx_worker); + spin_unlock_irqrestore(&i2400m->tx_lock, flags); d_fnend(3, dev, "(i2400m %p) = void\n", i2400m); } @@ -130,27 +138,40 @@ int i2400ms_tx_setup(struct i2400ms *i2400ms) int result; struct device *dev = &i2400ms->func->dev; struct i2400m *i2400m = &i2400ms->i2400m; + struct workqueue_struct *tx_workqueue; + unsigned long flags; d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms); INIT_WORK(&i2400ms->tx_worker, i2400ms_tx_submit); snprintf(i2400ms->tx_wq_name, sizeof(i2400ms->tx_wq_name), "%s-tx", i2400m->wimax_dev.name); - i2400ms->tx_workqueue = + tx_workqueue = create_singlethread_workqueue(i2400ms->tx_wq_name); - if (NULL == i2400ms->tx_workqueue) { + if (tx_workqueue == NULL) { dev_err(dev, "TX: failed to create workqueue\n"); result = -ENOMEM; } else result = 0; + spin_lock_irqsave(&i2400m->tx_lock, flags); + i2400ms->tx_workqueue = tx_workqueue; + spin_unlock_irqrestore(&i2400m->tx_lock, flags); d_fnend(5, dev, "(i2400ms %p) = %d\n", i2400ms, result); return result; } void i2400ms_tx_release(struct i2400ms *i2400ms) { - if (i2400ms->tx_workqueue) { - destroy_workqueue(i2400ms->tx_workqueue); - i2400ms->tx_workqueue = NULL; - } + struct i2400m *i2400m = &i2400ms->i2400m; + struct workqueue_struct *tx_workqueue; + unsigned long flags; + + tx_workqueue = i2400ms->tx_workqueue; + + spin_lock_irqsave(&i2400m->tx_lock, flags); + i2400ms->tx_workqueue = NULL; + spin_unlock_irqrestore(&i2400m->tx_lock, flags); + + if (tx_workqueue) + destroy_workqueue(tx_workqueue); } diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c index 7632f80..9bfc26e 100644 --- a/drivers/net/wimax/i2400m/sdio.c +++ b/drivers/net/wimax/i2400m/sdio.c @@ -483,6 +483,13 @@ int i2400ms_probe(struct sdio_func *func, sdio_set_drvdata(func, i2400ms); i2400m->bus_tx_block_size = I2400MS_BLK_SIZE; + /* + * Room required in the TX queue for SDIO message to accommodate + * a smallest payload while allocating header space is 224 bytes, + * which is the smallest message size(the block size 256 bytes) + * minus the smallest message header size(32 bytes). + */ + i2400m->bus_tx_room_min = I2400MS_BLK_SIZE - I2400M_PL_ALIGN * 2; i2400m->bus_pl_size_max = I2400MS_PL_SIZE_MAX; i2400m->bus_setup = i2400ms_bus_setup; i2400m->bus_dev_start = i2400ms_bus_dev_start; diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c index b0cb906..3f819ef 100644 --- a/drivers/net/wimax/i2400m/tx.c +++ b/drivers/net/wimax/i2400m/tx.c @@ -258,8 +258,10 @@ enum { * Doc says maximum transaction is 16KiB. If we had 16KiB en * route and 16KiB being queued, it boils down to needing * 32KiB. + * 32KiB is insufficient for 1400 MTU, hence increasing + * tx buffer size to 64KiB. */ - I2400M_TX_BUF_SIZE = 32768, + I2400M_TX_BUF_SIZE = 65536, /** * Message header and payload descriptors have to be 16 * aligned (16 + 4 * N = 16 * M). If we take that average sent @@ -270,10 +272,21 @@ enum { * at the end there are less, we pad up to the nearest * multiple of 16. */ - I2400M_TX_PLD_MAX = 12, + /* + * According to Intel Wimax i3200, i5x50 and i6x50 specification + * documents, the maximum number of payloads per message can be + * up to 60. Increasing the number of payloads to 60 per message + * helps to accommodate smaller payloads in a single transaction. + */ + I2400M_TX_PLD_MAX = 60, I2400M_TX_PLD_SIZE = sizeof(struct i2400m_msg_hdr) + I2400M_TX_PLD_MAX * sizeof(struct i2400m_pld), I2400M_TX_SKIP = 0x80000000, + /* + * According to Intel Wimax i3200, i5x50 and i6x50 specification + * documents, the maximum size of each message can be up to 16KiB. + */ + I2400M_TX_MSG_SIZE = 16384, }; #define TAIL_FULL ((void *)~(unsigned long)NULL) @@ -328,6 +341,14 @@ size_t __i2400m_tx_tail_room(struct i2400m *i2400m) * @padding: ensure that there is at least this many bytes of free * contiguous space in the fifo. This is needed because later on * we might need to add padding. + * @try_head: specify either to allocate head room or tail room space + * in the TX FIFO. This boolean is required to avoids a system hang + * due to an infinite loop caused by i2400m_tx_fifo_push(). + * The caller must always try to allocate tail room space first by + * calling this routine with try_head = 0. In case if there + * is not enough tail room space but there is enough head room space, + * (i2400m_tx_fifo_push() returns TAIL_FULL) try to allocate head + * room space, by calling this routine again with try_head = 1. * * Returns: * @@ -359,6 +380,48 @@ size_t __i2400m_tx_tail_room(struct i2400m *i2400m) * fail and return TAIL_FULL and let the caller figure out if we wants to * skip the tail room and try to allocate from the head. * + * There is a corner case, wherein i2400m_tx_new() can get into + * an infinite loop calling i2400m_tx_fifo_push(). + * In certain situations, tx_in would have reached on the top of TX FIFO + * and i2400m_tx_tail_room() returns 0, as described below: + * + * N ___________ tail room is zero + * |<- IN ->| + * | | + * | | + * | | + * | data | + * |<- OUT ->| + * | | + * | | + * | head room | + * 0 ----------- + * During such a time, where tail room is zero in the TX FIFO and if there + * is a request to add a payload to TX FIFO, which calls: + * i2400m_tx() + * ->calls i2400m_tx_close() + * ->calls i2400m_tx_skip_tail() + * goto try_new; + * ->calls i2400m_tx_new() + * |----> [try_head:] + * infinite loop | ->calls i2400m_tx_fifo_push() + * | if (tail_room < needed) + * | if (head_room => needed) + * | return TAIL_FULL; + * |<---- goto try_head; + * + * i2400m_tx() calls i2400m_tx_close() to close the message, since there + * is no tail room to accommodate the payload and calls + * i2400m_tx_skip_tail() to skip the tail space. Now i2400m_tx() calls + * i2400m_tx_new() to allocate space for new message header calling + * i2400m_tx_fifo_push() that returns TAIL_FULL, since there is no tail space + * to accommodate the message header, but there is enough head space. + * The i2400m_tx_new() keeps re-retrying by calling i2400m_tx_fifo_push() + * ending up in a loop causing system freeze. + * + * This corner case is avoided by using a try_head boolean, + * as an argument to i2400m_tx_fifo_push(). + * * Note: * * Assumes i2400m->tx_lock is taken, and we use that as a barrier @@ -367,7 +430,8 @@ size_t __i2400m_tx_tail_room(struct i2400m *i2400m) * pop data off the queue */ static -void *i2400m_tx_fifo_push(struct i2400m *i2400m, size_t size, size_t padding) +void *i2400m_tx_fifo_push(struct i2400m *i2400m, size_t size, + size_t padding, bool try_head) { struct device *dev = i2400m_dev(i2400m); size_t room, tail_room, needed_size; @@ -382,9 +446,21 @@ void *i2400m_tx_fifo_push(struct i2400m *i2400m, size_t size, size_t padding) } /* Is there space at the tail? */ tail_room = __i2400m_tx_tail_room(i2400m); - if (tail_room < needed_size) { - if (i2400m->tx_out % I2400M_TX_BUF_SIZE - < i2400m->tx_in % I2400M_TX_BUF_SIZE) { + if (!try_head && tail_room < needed_size) { + /* + * If the tail room space is not enough to push the message + * in the TX FIFO, then there are two possibilities: + * 1. There is enough head room space to accommodate + * this message in the TX FIFO. + * 2. There is not enough space in the head room and + * in tail room of the TX FIFO to accommodate the message. + * In the case (1), return TAIL_FULL so that the caller + * can figure out, if the caller wants to push the message + * into the head room space. + * In the case (2), return NULL, indicating that the TX FIFO + * cannot accommodate the message. + */ + if (room - tail_room >= needed_size) { d_printf(2, dev, "fifo push %zu/%zu: tail full\n", size, padding); return TAIL_FULL; /* There might be head space */ @@ -485,14 +561,25 @@ void i2400m_tx_new(struct i2400m *i2400m) { struct device *dev = i2400m_dev(i2400m); struct i2400m_msg_hdr *tx_msg; + bool try_head = 0; BUG_ON(i2400m->tx_msg != NULL); + /* + * In certain situations, TX queue might have enough space to + * accommodate the new message header I2400M_TX_PLD_SIZE, but + * might not have enough space to accommodate the payloads. + * Adding bus_tx_room_min padding while allocating a new TX message + * increases the possibilities of including at least one payload of the + * size <= bus_tx_room_min. + */ try_head: - tx_msg = i2400m_tx_fifo_push(i2400m, I2400M_TX_PLD_SIZE, 0); + tx_msg = i2400m_tx_fifo_push(i2400m, I2400M_TX_PLD_SIZE, + i2400m->bus_tx_room_min, try_head); if (tx_msg == NULL) goto out; else if (tx_msg == TAIL_FULL) { i2400m_tx_skip_tail(i2400m); d_printf(2, dev, "new TX message: tail full, trying head\n"); + try_head = 1; goto try_head; } memset(tx_msg, 0, I2400M_TX_PLD_SIZE); @@ -566,7 +653,7 @@ void i2400m_tx_close(struct i2400m *i2400m) aligned_size = ALIGN(tx_msg_moved->size, i2400m->bus_tx_block_size); padding = aligned_size - tx_msg_moved->size; if (padding > 0) { - pad_buf = i2400m_tx_fifo_push(i2400m, padding, 0); + pad_buf = i2400m_tx_fifo_push(i2400m, padding, 0, 0); if (unlikely(WARN_ON(pad_buf == NULL || pad_buf == TAIL_FULL))) { /* This should not happen -- append should verify @@ -632,6 +719,7 @@ int i2400m_tx(struct i2400m *i2400m, const void *buf, size_t buf_len, unsigned long flags; size_t padded_len; void *ptr; + bool try_head = 0; unsigned is_singleton = pl_type == I2400M_PT_RESET_WARM || pl_type == I2400M_PT_RESET_COLD; @@ -643,9 +731,11 @@ int i2400m_tx(struct i2400m *i2400m, const void *buf, size_t buf_len, * current one is out of payload slots or we have a singleton, * close it and start a new one */ spin_lock_irqsave(&i2400m->tx_lock, flags); - result = -ESHUTDOWN; - if (i2400m->tx_buf == NULL) + /* If tx_buf is NULL, device is shutdown */ + if (i2400m->tx_buf == NULL) { + result = -ESHUTDOWN; goto error_tx_new; + } try_new: if (unlikely(i2400m->tx_msg == NULL)) i2400m_tx_new(i2400m); @@ -659,7 +749,13 @@ try_new: } if (i2400m->tx_msg == NULL) goto error_tx_new; - if (i2400m->tx_msg->size + padded_len > I2400M_TX_BUF_SIZE / 2) { + /* + * Check if this skb will fit in the TX queue's current active + * TX message. The total message size must not exceed the maximum + * size of each message I2400M_TX_MSG_SIZE. If it exceeds, + * close the current message and push this skb into the new message. + */ + if (i2400m->tx_msg->size + padded_len > I2400M_TX_MSG_SIZE) { d_printf(2, dev, "TX: message too big, going new\n"); i2400m_tx_close(i2400m); i2400m_tx_new(i2400m); @@ -669,11 +765,12 @@ try_new: /* So we have a current message header; now append space for * the message -- if there is not enough, try the head */ ptr = i2400m_tx_fifo_push(i2400m, padded_len, - i2400m->bus_tx_block_size); + i2400m->bus_tx_block_size, try_head); if (ptr == TAIL_FULL) { /* Tail is full, try head */ d_printf(2, dev, "pl append: tail full\n"); i2400m_tx_close(i2400m); i2400m_tx_skip_tail(i2400m); + try_head = 1; goto try_new; } else if (ptr == NULL) { /* All full */ result = -ENOSPC; @@ -689,7 +786,7 @@ try_new: pl_type, buf_len); tx_msg->num_pls = le16_to_cpu(num_pls+1); tx_msg->size += padded_len; - d_printf(2, dev, "TX: appended %zu b (up to %u b) pl #%u \n", + d_printf(2, dev, "TX: appended %zu b (up to %u b) pl #%u\n", padded_len, tx_msg->size, num_pls+1); d_printf(2, dev, "TX: appended hdr @%zu %zu b pl #%u @%zu %zu/%zu b\n", @@ -860,25 +957,43 @@ EXPORT_SYMBOL_GPL(i2400m_tx_msg_sent); * i2400m_tx_setup - Initialize the TX queue and infrastructure * * Make sure we reset the TX sequence to zero, as when this function - * is called, the firmware has been just restarted. + * is called, the firmware has been just restarted. Same rational + * for tx_in, tx_out, tx_msg_size and tx_msg. We reset them since + * the memory for TX queue is reallocated. */ int i2400m_tx_setup(struct i2400m *i2400m) { - int result; + int result = 0; + void *tx_buf; + unsigned long flags; /* Do this here only once -- can't do on * i2400m_hard_start_xmit() as we'll cause race conditions if * the WS was scheduled on another CPU */ INIT_WORK(&i2400m->wake_tx_ws, i2400m_wake_tx_work); - i2400m->tx_sequence = 0; - i2400m->tx_buf = kmalloc(I2400M_TX_BUF_SIZE, GFP_KERNEL); - if (i2400m->tx_buf == NULL) + tx_buf = kmalloc(I2400M_TX_BUF_SIZE, GFP_ATOMIC); + if (tx_buf == NULL) { result = -ENOMEM; - else - result = 0; + goto error_kmalloc; + } + + /* + * Fail the build if we can't fit at least two maximum size messages + * on the TX FIFO [one being delivered while one is constructed]. + */ + BUILD_BUG_ON(2 * I2400M_TX_MSG_SIZE > I2400M_TX_BUF_SIZE); + spin_lock_irqsave(&i2400m->tx_lock, flags); + i2400m->tx_sequence = 0; + i2400m->tx_in = 0; + i2400m->tx_out = 0; + i2400m->tx_msg_size = 0; + i2400m->tx_msg = NULL; + i2400m->tx_buf = tx_buf; + spin_unlock_irqrestore(&i2400m->tx_lock, flags); /* Huh? the bus layer has to define this... */ BUG_ON(i2400m->bus_tx_block_size == 0); +error_kmalloc: return result; } diff --git a/drivers/net/wimax/i2400m/usb-notif.c b/drivers/net/wimax/i2400m/usb-notif.c index 7b6a1d9..d44b545 100644 --- a/drivers/net/wimax/i2400m/usb-notif.c +++ b/drivers/net/wimax/i2400m/usb-notif.c @@ -178,7 +178,6 @@ error_submit: out: d_fnend(4, dev, "(urb %p status %d actual_length %d) = void\n", urb, urb->status, urb->actual_length); - return; } diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c index d8c4d64..0d5081d 100644 --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -82,6 +82,8 @@ MODULE_PARM_DESC(debug, /* Our firmware file name */ static const char *i2400mu_bus_fw_names_5x50[] = { +#define I2400MU_FW_FILE_NAME_v1_5 "i2400m-fw-usb-1.5.sbcf" + I2400MU_FW_FILE_NAME_v1_5, #define I2400MU_FW_FILE_NAME_v1_4 "i2400m-fw-usb-1.4.sbcf" I2400MU_FW_FILE_NAME_v1_4, NULL, @@ -467,6 +469,13 @@ int i2400mu_probe(struct usb_interface *iface, usb_set_intfdata(iface, i2400mu); i2400m->bus_tx_block_size = I2400MU_BLK_SIZE; + /* + * Room required in the Tx queue for USB message to accommodate + * a smallest payload while allocating header space is 16 bytes. + * Adding this room for the new tx message increases the + * possibilities of including any payload with size <= 16 bytes. + */ + i2400m->bus_tx_room_min = I2400MU_BLK_SIZE; i2400m->bus_pl_size_max = I2400MU_PL_SIZE_MAX; i2400m->bus_setup = NULL; i2400m->bus_dev_start = i2400mu_bus_dev_start; @@ -505,7 +514,7 @@ int i2400mu_probe(struct usb_interface *iface, iface->needs_remote_wakeup = 1; /* autosuspend (15s delay) */ device_init_wakeup(dev, 1); usb_dev->autosuspend_delay = 15 * HZ; - usb_dev->autosuspend_disabled = 0; + usb_enable_autosuspend(usb_dev); #endif result = i2400m_setup(i2400m, I2400M_BRI_MAC_REINIT); @@ -778,4 +787,5 @@ MODULE_AUTHOR("Intel Corporation <linux-wimax@intel.com>"); MODULE_DESCRIPTION("Driver for USB based Intel Wireless WiMAX Connection 2400M " "(5x50 & 6050)"); MODULE_LICENSE("GPL"); -MODULE_FIRMWARE(I2400MU_FW_FILE_NAME_v1_4); +MODULE_FIRMWARE(I2400MU_FW_FILE_NAME_v1_5); +MODULE_FIRMWARE(I6050U_FW_FILE_NAME_v1_5); |