diff options
Diffstat (limited to 'drivers/net/wireless/bcmdhd/include/devctrl_if/wlioctl_defs.h')
-rw-r--r-- | drivers/net/wireless/bcmdhd/include/devctrl_if/wlioctl_defs.h | 2055 |
1 files changed, 2055 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcmdhd/include/devctrl_if/wlioctl_defs.h b/drivers/net/wireless/bcmdhd/include/devctrl_if/wlioctl_defs.h new file mode 100644 index 0000000..77e37fe --- /dev/null +++ b/drivers/net/wireless/bcmdhd/include/devctrl_if/wlioctl_defs.h @@ -0,0 +1,2055 @@ +/* + * Custom OID/ioctl definitions for + * Broadcom 802.11abg Networking Device Driver + * + * Definitions subject to change without notice. + * + * Copyright (C) 1999-2014, Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the "GPL"), + * available at http://www.broadcom.com/licenses/GPLv2.php, with the + * following added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions of + * the license of that module. An independent module is a module which is not + * derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a license + * other than the GPL, without Broadcom's express prior written consent. + * + * $Id: wlioctl_defs.h 403826 2013-05-22 16:40:55Z $ + */ + + +#ifndef wlioctl_defs_h +#define wlioctl_defs_h + + + + + +/* All builds use the new 11ac ratespec/chanspec */ +#undef D11AC_IOTYPES +#define D11AC_IOTYPES + +/* WL_RSPEC defines for rate information */ +#define WL_RSPEC_RATE_MASK 0x000000FF /* rate or HT MCS value */ +#define WL_RSPEC_VHT_MCS_MASK 0x0000000F /* VHT MCS value */ +#define WL_RSPEC_VHT_NSS_MASK 0x000000F0 /* VHT Nss value */ +#define WL_RSPEC_VHT_NSS_SHIFT 4 /* VHT Nss value shift */ +#define WL_RSPEC_TXEXP_MASK 0x00000300 +#define WL_RSPEC_TXEXP_SHIFT 8 +#define WL_RSPEC_BW_MASK 0x00070000 /* bandwidth mask */ +#define WL_RSPEC_BW_SHIFT 16 /* bandwidth shift */ +#define WL_RSPEC_STBC 0x00100000 /* STBC encoding, Nsts = 2 x Nss */ +#define WL_RSPEC_TXBF 0x00200000 /* bit indicates TXBF mode */ +#define WL_RSPEC_LDPC 0x00400000 /* bit indicates adv coding in use */ +#define WL_RSPEC_SGI 0x00800000 /* Short GI mode */ +#define WL_RSPEC_ENCODING_MASK 0x03000000 /* Encoding of Rate/MCS field */ +#define WL_RSPEC_OVERRIDE_RATE 0x40000000 /* bit indicate to override mcs only */ +#define WL_RSPEC_OVERRIDE_MODE 0x80000000 /* bit indicates override both rate & mode */ + +/* WL_RSPEC_ENCODING field defs */ +#define WL_RSPEC_ENCODE_RATE 0x00000000 /* Legacy rate is stored in RSPEC_RATE_MASK */ +#define WL_RSPEC_ENCODE_HT 0x01000000 /* HT MCS is stored in RSPEC_RATE_MASK */ +#define WL_RSPEC_ENCODE_VHT 0x02000000 /* VHT MCS and Nss is stored in RSPEC_RATE_MASK */ + +/* WL_RSPEC_BW field defs */ +#define WL_RSPEC_BW_UNSPECIFIED 0 +#define WL_RSPEC_BW_20MHZ 0x00010000 +#define WL_RSPEC_BW_40MHZ 0x00020000 +#define WL_RSPEC_BW_80MHZ 0x00030000 +#define WL_RSPEC_BW_160MHZ 0x00040000 + +/* Legacy defines for the nrate iovar */ +#define OLD_NRATE_MCS_INUSE 0x00000080 /* MSC in use,indicates b0-6 holds an mcs */ +#define OLD_NRATE_RATE_MASK 0x0000007f /* rate/mcs value */ +#define OLD_NRATE_STF_MASK 0x0000ff00 /* stf mode mask: siso, cdd, stbc, sdm */ +#define OLD_NRATE_STF_SHIFT 8 /* stf mode shift */ +#define OLD_NRATE_OVERRIDE 0x80000000 /* bit indicates override both rate & mode */ +#define OLD_NRATE_OVERRIDE_MCS_ONLY 0x40000000 /* bit indicate to override mcs only */ +#define OLD_NRATE_SGI 0x00800000 /* sgi mode */ +#define OLD_NRATE_LDPC_CODING 0x00400000 /* bit indicates adv coding in use */ + +#define OLD_NRATE_STF_SISO 0 /* stf mode SISO */ +#define OLD_NRATE_STF_CDD 1 /* stf mode CDD */ +#define OLD_NRATE_STF_STBC 2 /* stf mode STBC */ +#define OLD_NRATE_STF_SDM 3 /* stf mode SDM */ + +#define HIGHEST_SINGLE_STREAM_MCS 7 /* MCS values greater than this enable multiple streams */ + +#define MAX_CCA_CHANNELS 38 /* Max number of 20 Mhz wide channels */ +#define MAX_CCA_SECS 60 /* CCA keeps this many seconds history */ + +#define IBSS_MED 15 /* Mediom in-bss congestion percentage */ +#define IBSS_HI 25 /* Hi in-bss congestion percentage */ +#define OBSS_MED 12 +#define OBSS_HI 25 +#define INTERFER_MED 5 +#define INTERFER_HI 10 + +#define CCA_FLAG_2G_ONLY 0x01 /* Return a channel from 2.4 Ghz band */ +#define CCA_FLAG_5G_ONLY 0x02 /* Return a channel from 2.4 Ghz band */ +#define CCA_FLAG_IGNORE_DURATION 0x04 /* Ignore dwell time for each channel */ +#define CCA_FLAGS_PREFER_1_6_11 0x10 +#define CCA_FLAG_IGNORE_INTERFER 0x20 /* do not exlude channel based on interfer level */ + +#define CCA_ERRNO_BAND 1 /* After filtering for band pref, no choices left */ +#define CCA_ERRNO_DURATION 2 /* After filtering for duration, no choices left */ +#define CCA_ERRNO_PREF_CHAN 3 /* After filtering for chan pref, no choices left */ +#define CCA_ERRNO_INTERFER 4 /* After filtering for interference, no choices left */ +#define CCA_ERRNO_TOO_FEW 5 /* Only 1 channel was input */ + +#define WL_STA_AID(a) ((a) &~ 0xc000) + +/* Flags for sta_info_t indicating properties of STA */ +#define WL_STA_BRCM 0x00000001 /* Running a Broadcom driver */ +#define WL_STA_WME 0x00000002 /* WMM association */ +#define WL_STA_NONERP 0x00000004 /* No ERP */ +#define WL_STA_AUTHE 0x00000008 /* Authenticated */ +#define WL_STA_ASSOC 0x00000010 /* Associated */ +#define WL_STA_AUTHO 0x00000020 /* Authorized */ +#define WL_STA_WDS 0x00000040 /* Wireless Distribution System */ +#define WL_STA_WDS_LINKUP 0x00000080 /* WDS traffic/probes flowing properly */ +#define WL_STA_PS 0x00000100 /* STA is in power save mode from AP's viewpoint */ +#define WL_STA_APSD_BE 0x00000200 /* APSD delv/trigger for AC_BE is default enabled */ +#define WL_STA_APSD_BK 0x00000400 /* APSD delv/trigger for AC_BK is default enabled */ +#define WL_STA_APSD_VI 0x00000800 /* APSD delv/trigger for AC_VI is default enabled */ +#define WL_STA_APSD_VO 0x00001000 /* APSD delv/trigger for AC_VO is default enabled */ +#define WL_STA_N_CAP 0x00002000 /* STA 802.11n capable */ +#define WL_STA_SCBSTATS 0x00004000 /* Per STA debug stats */ +#define WL_STA_AMPDU_CAP 0x00008000 /* STA AMPDU capable */ +#define WL_STA_AMSDU_CAP 0x00010000 /* STA AMSDU capable */ +#define WL_STA_MIMO_PS 0x00020000 /* mimo ps mode is enabled */ +#define WL_STA_MIMO_RTS 0x00040000 /* send rts in mimo ps mode */ +#define WL_STA_RIFS_CAP 0x00080000 /* rifs enabled */ +#define WL_STA_VHT_CAP 0x00100000 /* STA VHT(11ac) capable */ +#define WL_STA_WPS 0x00200000 /* WPS state */ + +#define WL_WDS_LINKUP WL_STA_WDS_LINKUP /* deprecated */ + +/* STA HT cap fields */ +#define WL_STA_CAP_LDPC_CODING 0x0001 /* Support for rx of LDPC coded pkts */ +#define WL_STA_CAP_40MHZ 0x0002 /* FALSE:20Mhz, TRUE:20/40MHZ supported */ +#define WL_STA_CAP_MIMO_PS_MASK 0x000C /* Mimo PS mask */ +#define WL_STA_CAP_MIMO_PS_SHIFT 0x0002 /* Mimo PS shift */ +#define WL_STA_CAP_MIMO_PS_OFF 0x0003 /* Mimo PS, no restriction */ +#define WL_STA_CAP_MIMO_PS_RTS 0x0001 /* Mimo PS, send RTS/CTS around MIMO frames */ +#define WL_STA_CAP_MIMO_PS_ON 0x0000 /* Mimo PS, MIMO disallowed */ +#define WL_STA_CAP_GF 0x0010 /* Greenfield preamble support */ +#define WL_STA_CAP_SHORT_GI_20 0x0020 /* 20MHZ short guard interval support */ +#define WL_STA_CAP_SHORT_GI_40 0x0040 /* 40Mhz short guard interval support */ +#define WL_STA_CAP_TX_STBC 0x0080 /* Tx STBC support */ +#define WL_STA_CAP_RX_STBC_MASK 0x0300 /* Rx STBC mask */ +#define WL_STA_CAP_RX_STBC_SHIFT 8 /* Rx STBC shift */ +#define WL_STA_CAP_DELAYED_BA 0x0400 /* delayed BA support */ +#define WL_STA_CAP_MAX_AMSDU 0x0800 /* Max AMSDU size in bytes , 0=3839, 1=7935 */ +#define WL_STA_CAP_DSSS_CCK 0x1000 /* DSSS/CCK supported by the BSS */ +#define WL_STA_CAP_PSMP 0x2000 /* Power Save Multi Poll support */ +#define WL_STA_CAP_40MHZ_INTOLERANT 0x4000 /* 40MHz Intolerant */ +#define WL_STA_CAP_LSIG_TXOP 0x8000 /* L-SIG TXOP protection support */ + +#define WL_STA_CAP_RX_STBC_NO 0x0 /* no rx STBC support */ +#define WL_STA_CAP_RX_STBC_ONE_STREAM 0x1 /* rx STBC support of 1 spatial stream */ +#define WL_STA_CAP_RX_STBC_TWO_STREAM 0x2 /* rx STBC support of 1-2 spatial streams */ +#define WL_STA_CAP_RX_STBC_THREE_STREAM 0x3 /* rx STBC support of 1-3 spatial streams */ + +/* scb vht flags */ +#define WL_STA_VHT_LDPCCAP 0x0001 +#define WL_STA_SGI80 0x0002 +#define WL_STA_SGI160 0x0004 +#define WL_STA_VHT_TX_STBCCAP 0x0008 +#define WL_STA_VHT_RX_STBCCAP 0x0010 +#define WL_STA_SU_BEAMFORMER 0x0020 +#define WL_STA_SU_BEAMFORMEE 0x0040 +#define WL_STA_MU_BEAMFORMER 0x0080 +#define WL_STA_MU_BEAMFORMEE 0x0100 +#define WL_STA_VHT_TXOP_PS 0x0200 +#define WL_STA_HTC_VHT_CAP 0x0400 + +/* Values for TX Filter override mode */ +#define WLC_TXFILTER_OVERRIDE_DISABLED 0 +#define WLC_TXFILTER_OVERRIDE_ENABLED 1 + +#define WL_IOCTL_ACTION_GET 0x0 +#define WL_IOCTL_ACTION_SET 0x1 +#define WL_IOCTL_ACTION_OVL_IDX_MASK 0x1e +#define WL_IOCTL_ACTION_OVL_RSV 0x20 +#define WL_IOCTL_ACTION_OVL 0x40 +#define WL_IOCTL_ACTION_MASK 0x7e +#define WL_IOCTL_ACTION_OVL_SHIFT 1 + +#define WL_BSSTYPE_INFRA 1 +#define WL_BSSTYPE_INDEP 0 +#define WL_BSSTYPE_ANY 2 + +/* Bitmask for scan_type */ +#define WL_SCANFLAGS_PASSIVE 0x01 /* force passive scan */ +#define WL_SCANFLAGS_RESERVED 0x02 /* Reserved */ +#define WL_SCANFLAGS_PROHIBITED 0x04 /* allow scanning prohibited channels */ +#define WL_SCANFLAGS_OFFCHAN 0x08 /* allow scanning/reporting off-channel APs */ +#define WL_SCANFLAGS_HOTSPOT 0x10 /* automatic ANQP to hotspot APs */ + +/* wl_iscan_results status values */ +#define WL_SCAN_RESULTS_SUCCESS 0 +#define WL_SCAN_RESULTS_PARTIAL 1 +#define WL_SCAN_RESULTS_PENDING 2 +#define WL_SCAN_RESULTS_ABORTED 3 +#define WL_SCAN_RESULTS_NO_MEM 4 + +#define SCANOL_ENABLED (1 << 0) +#define SCANOL_BCAST_SSID (1 << 1) +#define SCANOL_NOTIFY_BCAST_SSID (1 << 2) +#define SCANOL_RESULTS_PER_CYCLE (1 << 3) + +/* scan times in milliseconds */ +#define SCANOL_HOME_TIME 45 /* for home channel processing */ +#define SCANOL_ASSOC_TIME 20 /* dwell on a channel while associated */ +#define SCANOL_UNASSOC_TIME 40 /* dwell on a channel while unassociated */ +#define SCANOL_PASSIVE_TIME 110 /* listen on a channelfor passive scan */ +#define SCANOL_AWAY_LIMIT 100 /* max time to be away from home channel */ +#define SCANOL_IDLE_REST_TIME 40 +#define SCANOL_IDLE_REST_MULTIPLIER 0 +#define SCANOL_ACTIVE_REST_TIME 20 +#define SCANOL_ACTIVE_REST_MULTIPLIER 0 +#define SCANOL_CYCLE_IDLE_REST_TIME 300000 /* Idle Rest Time between Scan Cycle (msec) */ +#define SCANOL_CYCLE_IDLE_REST_MULTIPLIER 0 /* Idle Rest Time Multiplier */ +#define SCANOL_CYCLE_ACTIVE_REST_TIME 200 +#define SCANOL_CYCLE_ACTIVE_REST_MULTIPLIER 0 +#define SCANOL_MAX_REST_TIME 3600000 /* max rest time between scan cycle (msec) */ +#define SCANOL_CYCLE_DEFAULT 0 /* default for Max Scan Cycle, 0 = forever */ +#define SCANOL_CYCLE_MAX 864000 /* Max Scan Cycle */ + /* 10 sec/scan cycle => 100 days */ +#define SCANOL_NPROBES 2 /* for Active scan; send n probes on each channel */ +#define SCANOL_NPROBES_MAX 5 /* for Active scan; send n probes on each channel */ +#define SCANOL_SCAN_START_DLY 10 /* delay start of offload scan (sec) */ +#define SCANOL_SCAN_START_DLY_MAX 240 /* delay start of offload scan (sec) */ +#define SCANOL_MULTIPLIER_MAX 10 /* Max Multiplier */ +#define SCANOL_UNASSOC_TIME_MAX 100 /* max dwell on a channel while unassociated */ +#define SCANOL_PASSIVE_TIME_MAX 500 /* max listen on a channel for passive scan */ +#define SCANOL_SSID_MAX 16 /* max supported preferred SSID */ + +/* masks for channel and ssid count */ +#define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff +#define WL_SCAN_PARAMS_NSSID_SHIFT 16 + +#define WL_SCAN_ACTION_START 1 +#define WL_SCAN_ACTION_CONTINUE 2 +#define WL_SCAN_ACTION_ABORT 3 + +#if defined(SIMPLE_ISCAN) +#define ISCAN_RETRY_CNT 5 +#define ISCAN_STATE_IDLE 0 +#define ISCAN_STATE_SCANING 1 +#define ISCAN_STATE_PENDING 2 +#endif /* SIMPLE_ISCAN */ + +#define ANTENNA_NUM_1 1 /* total number of antennas to be used */ +#define ANTENNA_NUM_2 2 +#define ANTENNA_NUM_3 3 +#define ANTENNA_NUM_4 4 + +#define ANT_SELCFG_AUTO 0x80 /* bit indicates antenna sel AUTO */ +#define ANT_SELCFG_MASK 0x33 /* antenna configuration mask */ +#define ANT_SELCFG_TX_UNICAST 0 /* unicast tx antenna configuration */ +#define ANT_SELCFG_RX_UNICAST 1 /* unicast rx antenna configuration */ +#define ANT_SELCFG_TX_DEF 2 /* default tx antenna configuration */ +#define ANT_SELCFG_RX_DEF 3 /* default rx antenna configuration */ + +/* interference source detection and identification mode */ +#define ITFR_MODE_DISABLE 0 /* disable feature */ +#define ITFR_MODE_MANUAL_ENABLE 1 /* enable manual detection */ +#define ITFR_MODE_AUTO_ENABLE 2 /* enable auto detection */ + +/* bit definitions for flags in interference source report */ +#define ITFR_INTERFERENCED 1 /* interference detected */ +#define ITFR_HOME_CHANNEL 2 /* home channel has interference */ +#define ITFR_NOISY_ENVIRONMENT 4 /* noisy environemnt so feature stopped */ + +#define WL_NUM_RPI_BINS 8 +#define WL_RM_TYPE_BASIC 1 +#define WL_RM_TYPE_CCA 2 +#define WL_RM_TYPE_RPI 3 + +#define WL_RM_FLAG_PARALLEL (1<<0) + +#define WL_RM_FLAG_LATE (1<<1) +#define WL_RM_FLAG_INCAPABLE (1<<2) +#define WL_RM_FLAG_REFUSED (1<<3) + +/* flags */ +#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */ + +#define WLC_CIS_DEFAULT 0 /* built-in default */ +#define WLC_CIS_SROM 1 /* source is sprom */ +#define WLC_CIS_OTP 2 /* source is otp */ + +/* PCL - Power Control Loop */ +/* current gain setting is replaced by user input */ +#define WL_ATTEN_APP_INPUT_PCL_OFF 0 /* turn off PCL, apply supplied input */ +#define WL_ATTEN_PCL_ON 1 /* turn on PCL */ +/* current gain setting is maintained */ +#define WL_ATTEN_PCL_OFF 2 /* turn off PCL. */ + +#define PLC_CMD_FAILOVER 1 +#define PLC_CMD_MAC_COST 2 +#define PLC_CMD_LINK_COST 3 +#define PLC_CMD_NODE_LIST 4 + +#define NODE_TYPE_UNKNOWN 0 /* Unknown link */ +#define NODE_TYPE_WIFI_ONLY 1 /* Pure Wireless STA node */ +#define NODE_TYPE_PLC_ONLY 2 /* Pure PLC only node */ +#define NODE_TYPE_WIFI_PLC 3 /* WiFi PLC capable node */ + +/* defines used by poweridx iovar - it controls power in a-band */ +/* current gain setting is maintained */ +#define WL_PWRIDX_PCL_OFF -2 /* turn off PCL. */ +#define WL_PWRIDX_PCL_ON -1 /* turn on PCL */ +#define WL_PWRIDX_LOWER_LIMIT -2 /* lower limit */ +#define WL_PWRIDX_UPPER_LIMIT 63 /* upper limit */ +/* value >= 0 causes + * - input to be set to that value + * - PCL to be off + */ + +#define BCM_MAC_STATUS_INDICATION (0x40010200L) + +/* Values for TX Filter override mode */ +#define WLC_TXFILTER_OVERRIDE_DISABLED 0 +#define WLC_TXFILTER_OVERRIDE_ENABLED 1 + +/* magic pattern used for mismatch driver and wl */ +#define WL_TXFIFO_SZ_MAGIC 0xa5a5 + +/* check this magic number */ +#define WLC_IOCTL_MAGIC 0x14e46c77 + +/* bss_info_cap_t flags */ +#define WL_BSS_FLAGS_FROM_BEACON 0x01 /* bss_info derived from beacon */ +#define WL_BSS_FLAGS_FROM_CACHE 0x02 /* bss_info collected from cache */ +#define WL_BSS_FLAGS_RSSI_ONCHANNEL 0x04 /* rssi info received on channel (vs offchannel) */ +#define WL_BSS_FLAGS_HS20 0x08 /* hotspot 2.0 capable */ +#define WL_BSS_FLAGS_RSSI_INVALID 0x10 /* BSS contains invalid RSSI */ +#define WL_BSS_FLAGS_RSSI_INACCURATE 0x20 /* BSS contains inaccurate RSSI */ + +/* bssinfo flag for nbss_cap */ +#define VHT_BI_SGI_80MHZ 0x00000100 +#define VHT_BI_80MHZ 0x00000200 +#define VHT_BI_160MHZ 0x00000400 +#define VHT_BI_8080MHZ 0x00000800 + +/* reference to wl_ioctl_t struct used by usermode driver */ +#define ioctl_subtype set /* subtype param */ +#define ioctl_pid used /* pid param */ +#define ioctl_status needed /* status param */ + + +/* Enumerate crypto algorithms */ +#define CRYPTO_ALGO_OFF 0 +#define CRYPTO_ALGO_WEP1 1 +#define CRYPTO_ALGO_TKIP 2 +#define CRYPTO_ALGO_WEP128 3 +#define CRYPTO_ALGO_AES_CCM 4 +#define CRYPTO_ALGO_AES_OCB_MSDU 5 +#define CRYPTO_ALGO_AES_OCB_MPDU 6 +#if !defined(BCMCCX) && !defined(BCMEXTCCX) +#define CRYPTO_ALGO_NALG 7 +#else +#define CRYPTO_ALGO_CKIP 7 +#define CRYPTO_ALGO_CKIP_MMH 8 +#define CRYPTO_ALGO_WEP_MMH 9 +#define CRYPTO_ALGO_NALG 10 +#endif /* !BCMCCX && !BCMEXTCCX */ + +#define CRYPTO_ALGO_SMS4 11 +#define CRYPTO_ALGO_PMK 12 /* for 802.1x supp to set PMK before 4-way */ +#define CRYPTO_ALGO_BIP 13 /* 802.11w BIP (aes cmac) */ + +#define CRYPTO_ALGO_AES_GCM 14 /* 128 bit GCM */ +#define CRYPTO_ALGO_AES_CCM256 15 /* 256 bit CCM */ +#define CRYPTO_ALGO_AES_GCM256 16 /* 256 bit GCM */ +#define CRYPTO_ALGO_BIP_CMAC256 17 /* 256 bit BIP CMAC */ +#define CRYPTO_ALGO_BIP_GMAC 18 /* 128 bit BIP GMAC */ +#define CRYPTO_ALGO_BIP_GMAC256 19 /* 256 bit BIP GMAC */ + +#define CRYPTO_ALGO_NONE CRYPTO_ALGO_OFF + +#define WSEC_GEN_MIC_ERROR 0x0001 +#define WSEC_GEN_REPLAY 0x0002 +#define WSEC_GEN_ICV_ERROR 0x0004 +#define WSEC_GEN_MFP_ACT_ERROR 0x0008 +#define WSEC_GEN_MFP_DISASSOC_ERROR 0x0010 +#define WSEC_GEN_MFP_DEAUTH_ERROR 0x0020 + +#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */ +#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ +#if defined(BCMCCX) || defined(BCMEXTCCX) +#define WL_CKIP_KP (1 << 4) /* CMIC */ +#define WL_CKIP_MMH (1 << 5) /* CKIP */ +#else +#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */ +#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */ +#endif /* BCMCCX || BCMEXTCCX */ +#define WL_IBSS_PEER_GROUP_KEY (1 << 6) /* Indicates a group key for a IBSS PEER */ + +/* wireless security bitvec */ +#define WEP_ENABLED 0x0001 +#define TKIP_ENABLED 0x0002 +#define AES_ENABLED 0x0004 +#define WSEC_SWFLAG 0x0008 +#ifdef BCMCCX +#define CKIP_KP_ENABLED 0x0010 +#define CKIP_MIC_ENABLED 0x0020 +#endif /* BCMCCX */ +#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */ +#ifdef BCMWAPI_WPI +#define SMS4_ENABLED 0x0100 +#endif /* BCMWAPI_WPI */ + +/* wsec macros for operating on the above definitions */ +#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED) +#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED) +#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED) + +#ifdef BCMCCX +#define WSEC_CKIP_KP_ENABLED(wsec) ((wsec) & CKIP_KP_ENABLED) +#define WSEC_CKIP_MIC_ENABLED(wsec) ((wsec) & CKIP_MIC_ENABLED) +#define WSEC_CKIP_ENABLED(wsec) ((wsec) & (CKIP_KP_ENABLED|CKIP_MIC_ENABLED)) + +#ifdef BCMWAPI_WPI +#define WSEC_ENABLED(wsec) \ + ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | CKIP_KP_ENABLED | \ + CKIP_MIC_ENABLED | SMS4_ENABLED)) +#else /* BCMWAPI_WPI */ +#define WSEC_ENABLED(wsec) \ + ((wsec) & \ + (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | CKIP_KP_ENABLED | CKIP_MIC_ENABLED)) +#endif /* BCMWAPI_WPI */ +#else /* defined BCMCCX */ +#ifdef BCMWAPI_WPI +#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | SMS4_ENABLED)) +#else /* BCMWAPI_WPI */ +#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED)) +#endif /* BCMWAPI_WPI */ +#endif /* BCMCCX */ +#define WSEC_SES_OW_ENABLED(wsec) ((wsec) & SES_OW_ENABLED) +#ifdef BCMWAPI_WAI +#define WSEC_SMS4_ENABLED(wsec) ((wsec) & SMS4_ENABLED) +#endif /* BCMWAPI_WAI */ + +#define MFP_CAPABLE 0x0200 +#define MFP_REQUIRED 0x0400 +#define MFP_SHA256 0x0800 /* a special configuration for STA for WIFI test tool */ + +/* WPA authentication mode bitvec */ +#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */ +#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */ +#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */ +#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */ +#if defined(BCMCCX) || defined(BCMEXTCCX) +#define WPA_AUTH_CCKM 0x0008 /* CCKM */ +#define WPA2_AUTH_CCKM 0x0010 /* CCKM2 */ +#endif /* BCMCCX || BCMEXTCCX */ +/* #define WPA_AUTH_8021X 0x0020 */ /* 802.1x, reserved */ +#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */ +#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */ +#define BRCM_AUTH_PSK 0x0100 /* BRCM specific PSK */ +#define BRCM_AUTH_DPT 0x0200 /* DPT PSK without group keys */ +#if defined(BCMWAPI_WAI) || defined(BCMWAPI_WPI) +#define WPA_AUTH_WAPI 0x0400 +#define WAPI_AUTH_NONE WPA_AUTH_NONE /* none (IBSS) */ +#define WAPI_AUTH_UNSPECIFIED 0x0400 /* over AS */ +#define WAPI_AUTH_PSK 0x0800 /* Pre-shared key */ +#endif /* BCMWAPI_WAI || BCMWAPI_WPI */ +#define WPA2_AUTH_MFP 0x1000 /* MFP (11w) in contrast to CCX */ +#define WPA2_AUTH_TPK 0x2000 /* TDLS Peer Key */ +#define WPA2_AUTH_FT 0x4000 /* Fast Transition. */ +#define WPA_AUTH_PFN_ANY 0xffffffff /* for PFN, match only ssid */ + +/* pmkid */ +#define MAXPMKID 16 + +#define WLC_IOCTL_MAXLEN 8192 /* max length ioctl buffer required */ +#define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */ +#define WLC_IOCTL_MEDLEN 1536 /* "med" length ioctl buffer required */ +#if defined(LCNCONF) || defined(LCN40CONF) +#define WLC_SAMPLECOLLECT_MAXLEN 8192 /* Max Sample Collect buffer */ +#else +#define WLC_SAMPLECOLLECT_MAXLEN 10240 /* Max Sample Collect buffer for two cores */ +#endif +#define WLC_SAMPLECOLLECT_MAXLEN_LCN40 8192 + +/* common ioctl definitions */ +#define WLC_GET_MAGIC 0 +#define WLC_GET_VERSION 1 +#define WLC_UP 2 +#define WLC_DOWN 3 +#define WLC_GET_LOOP 4 +#define WLC_SET_LOOP 5 +#define WLC_DUMP 6 +#define WLC_GET_MSGLEVEL 7 +#define WLC_SET_MSGLEVEL 8 +#define WLC_GET_PROMISC 9 +#define WLC_SET_PROMISC 10 +/* #define WLC_OVERLAY_IOCTL 11 */ /* not supported */ +#define WLC_GET_RATE 12 +#define WLC_GET_MAX_RATE 13 +#define WLC_GET_INSTANCE 14 +/* #define WLC_GET_FRAG 15 */ /* no longer supported */ +/* #define WLC_SET_FRAG 16 */ /* no longer supported */ +/* #define WLC_GET_RTS 17 */ /* no longer supported */ +/* #define WLC_SET_RTS 18 */ /* no longer supported */ +#define WLC_GET_INFRA 19 +#define WLC_SET_INFRA 20 +#define WLC_GET_AUTH 21 +#define WLC_SET_AUTH 22 +#define WLC_GET_BSSID 23 +#define WLC_SET_BSSID 24 +#define WLC_GET_SSID 25 +#define WLC_SET_SSID 26 +#define WLC_RESTART 27 +#define WLC_TERMINATED 28 +/* #define WLC_DUMP_SCB 28 */ /* no longer supported */ +#define WLC_GET_CHANNEL 29 +#define WLC_SET_CHANNEL 30 +#define WLC_GET_SRL 31 +#define WLC_SET_SRL 32 +#define WLC_GET_LRL 33 +#define WLC_SET_LRL 34 +#define WLC_GET_PLCPHDR 35 +#define WLC_SET_PLCPHDR 36 +#define WLC_GET_RADIO 37 +#define WLC_SET_RADIO 38 +#define WLC_GET_PHYTYPE 39 +#define WLC_DUMP_RATE 40 +#define WLC_SET_RATE_PARAMS 41 +#define WLC_GET_FIXRATE 42 +#define WLC_SET_FIXRATE 43 +/* #define WLC_GET_WEP 42 */ /* no longer supported */ +/* #define WLC_SET_WEP 43 */ /* no longer supported */ +#define WLC_GET_KEY 44 +#define WLC_SET_KEY 45 +#define WLC_GET_REGULATORY 46 +#define WLC_SET_REGULATORY 47 +#define WLC_GET_PASSIVE_SCAN 48 +#define WLC_SET_PASSIVE_SCAN 49 +#define WLC_SCAN 50 +#define WLC_SCAN_RESULTS 51 +#define WLC_DISASSOC 52 +#define WLC_REASSOC 53 +#define WLC_GET_ROAM_TRIGGER 54 +#define WLC_SET_ROAM_TRIGGER 55 +#define WLC_GET_ROAM_DELTA 56 +#define WLC_SET_ROAM_DELTA 57 +#define WLC_GET_ROAM_SCAN_PERIOD 58 +#define WLC_SET_ROAM_SCAN_PERIOD 59 +#define WLC_EVM 60 /* diag */ +#define WLC_GET_TXANT 61 +#define WLC_SET_TXANT 62 +#define WLC_GET_ANTDIV 63 +#define WLC_SET_ANTDIV 64 +/* #define WLC_GET_TXPWR 65 */ /* no longer supported */ +/* #define WLC_SET_TXPWR 66 */ /* no longer supported */ +#define WLC_GET_CLOSED 67 +#define WLC_SET_CLOSED 68 +#define WLC_GET_MACLIST 69 +#define WLC_SET_MACLIST 70 +#define WLC_GET_RATESET 71 +#define WLC_SET_RATESET 72 +/* #define WLC_GET_LOCALE 73 */ /* no longer supported */ +#define WLC_LONGTRAIN 74 +#define WLC_GET_BCNPRD 75 +#define WLC_SET_BCNPRD 76 +#define WLC_GET_DTIMPRD 77 +#define WLC_SET_DTIMPRD 78 +#define WLC_GET_SROM 79 +#define WLC_SET_SROM 80 +#define WLC_GET_WEP_RESTRICT 81 +#define WLC_SET_WEP_RESTRICT 82 +#define WLC_GET_COUNTRY 83 +#define WLC_SET_COUNTRY 84 +#define WLC_GET_PM 85 +#define WLC_SET_PM 86 +#define WLC_GET_WAKE 87 +#define WLC_SET_WAKE 88 +/* #define WLC_GET_D11CNTS 89 */ /* -> "counters" iovar */ +#define WLC_GET_FORCELINK 90 /* ndis only */ +#define WLC_SET_FORCELINK 91 /* ndis only */ +#define WLC_FREQ_ACCURACY 92 /* diag */ +#define WLC_CARRIER_SUPPRESS 93 /* diag */ +#define WLC_GET_PHYREG 94 +#define WLC_SET_PHYREG 95 +#define WLC_GET_RADIOREG 96 +#define WLC_SET_RADIOREG 97 +#define WLC_GET_REVINFO 98 +#define WLC_GET_UCANTDIV 99 +#define WLC_SET_UCANTDIV 100 +#define WLC_R_REG 101 +#define WLC_W_REG 102 +/* #define WLC_DIAG_LOOPBACK 103 old tray diag */ +/* #define WLC_RESET_D11CNTS 104 */ /* -> "reset_d11cnts" iovar */ +#define WLC_GET_MACMODE 105 +#define WLC_SET_MACMODE 106 +#define WLC_GET_MONITOR 107 +#define WLC_SET_MONITOR 108 +#define WLC_GET_GMODE 109 +#define WLC_SET_GMODE 110 +#define WLC_GET_LEGACY_ERP 111 +#define WLC_SET_LEGACY_ERP 112 +#define WLC_GET_RX_ANT 113 +#define WLC_GET_CURR_RATESET 114 /* current rateset */ +#define WLC_GET_SCANSUPPRESS 115 +#define WLC_SET_SCANSUPPRESS 116 +#define WLC_GET_AP 117 +#define WLC_SET_AP 118 +#define WLC_GET_EAP_RESTRICT 119 +#define WLC_SET_EAP_RESTRICT 120 +#define WLC_SCB_AUTHORIZE 121 +#define WLC_SCB_DEAUTHORIZE 122 +#define WLC_GET_WDSLIST 123 +#define WLC_SET_WDSLIST 124 +#define WLC_GET_ATIM 125 +#define WLC_SET_ATIM 126 +#define WLC_GET_RSSI 127 +#define WLC_GET_PHYANTDIV 128 +#define WLC_SET_PHYANTDIV 129 +#define WLC_AP_RX_ONLY 130 +#define WLC_GET_TX_PATH_PWR 131 +#define WLC_SET_TX_PATH_PWR 132 +#define WLC_GET_WSEC 133 +#define WLC_SET_WSEC 134 +#define WLC_GET_PHY_NOISE 135 +#define WLC_GET_BSS_INFO 136 +#define WLC_GET_PKTCNTS 137 +#define WLC_GET_LAZYWDS 138 +#define WLC_SET_LAZYWDS 139 +#define WLC_GET_BANDLIST 140 + +#define WLC_GET_BAND 141 +#define WLC_SET_BAND 142 +#define WLC_SCB_DEAUTHENTICATE 143 +#define WLC_GET_SHORTSLOT 144 +#define WLC_GET_SHORTSLOT_OVERRIDE 145 +#define WLC_SET_SHORTSLOT_OVERRIDE 146 +#define WLC_GET_SHORTSLOT_RESTRICT 147 +#define WLC_SET_SHORTSLOT_RESTRICT 148 +#define WLC_GET_GMODE_PROTECTION 149 +#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 +#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 +#define WLC_UPGRADE 152 +/* #define WLC_GET_MRATE 153 */ /* no longer supported */ +/* #define WLC_SET_MRATE 154 */ /* no longer supported */ +#define WLC_GET_IGNORE_BCNS 155 +#define WLC_SET_IGNORE_BCNS 156 +#define WLC_GET_SCB_TIMEOUT 157 +#define WLC_SET_SCB_TIMEOUT 158 +#define WLC_GET_ASSOCLIST 159 +#define WLC_GET_CLK 160 +#define WLC_SET_CLK 161 +#define WLC_GET_UP 162 +#define WLC_OUT 163 +#define WLC_GET_WPA_AUTH 164 +#define WLC_SET_WPA_AUTH 165 +#define WLC_GET_UCFLAGS 166 +#define WLC_SET_UCFLAGS 167 +#define WLC_GET_PWRIDX 168 +#define WLC_SET_PWRIDX 169 +#define WLC_GET_TSSI 170 +#define WLC_GET_SUP_RATESET_OVERRIDE 171 +#define WLC_SET_SUP_RATESET_OVERRIDE 172 +/* #define WLC_SET_FAST_TIMER 173 */ /* no longer supported */ +/* #define WLC_GET_FAST_TIMER 174 */ /* no longer supported */ +/* #define WLC_SET_SLOW_TIMER 175 */ /* no longer supported */ +/* #define WLC_GET_SLOW_TIMER 176 */ /* no longer supported */ +/* #define WLC_DUMP_PHYREGS 177 */ /* no longer supported */ +#define WLC_GET_PROTECTION_CONTROL 178 +#define WLC_SET_PROTECTION_CONTROL 179 +#define WLC_GET_PHYLIST 180 +#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */ +#define WLC_DECRYPT_STATUS 182 /* ndis only */ +#define WLC_GET_KEY_SEQ 183 +#define WLC_GET_SCAN_CHANNEL_TIME 184 +#define WLC_SET_SCAN_CHANNEL_TIME 185 +#define WLC_GET_SCAN_UNASSOC_TIME 186 +#define WLC_SET_SCAN_UNASSOC_TIME 187 +#define WLC_GET_SCAN_HOME_TIME 188 +#define WLC_SET_SCAN_HOME_TIME 189 +#define WLC_GET_SCAN_NPROBES 190 +#define WLC_SET_SCAN_NPROBES 191 +#define WLC_GET_PRB_RESP_TIMEOUT 192 +#define WLC_SET_PRB_RESP_TIMEOUT 193 +#define WLC_GET_ATTEN 194 +#define WLC_SET_ATTEN 195 +#define WLC_GET_SHMEM 196 /* diag */ +#define WLC_SET_SHMEM 197 /* diag */ +/* #define WLC_GET_GMODE_PROTECTION_CTS 198 */ /* no longer supported */ +/* #define WLC_SET_GMODE_PROTECTION_CTS 199 */ /* no longer supported */ +#define WLC_SET_WSEC_TEST 200 +#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201 +#define WLC_TKIP_COUNTERMEASURES 202 +#define WLC_GET_PIOMODE 203 +#define WLC_SET_PIOMODE 204 +#define WLC_SET_ASSOC_PREFER 205 +#define WLC_GET_ASSOC_PREFER 206 +#define WLC_SET_ROAM_PREFER 207 +#define WLC_GET_ROAM_PREFER 208 +#define WLC_SET_LED 209 +#define WLC_GET_LED 210 +#define WLC_GET_INTERFERENCE_MODE 211 +#define WLC_SET_INTERFERENCE_MODE 212 +#define WLC_GET_CHANNEL_QA 213 +#define WLC_START_CHANNEL_QA 214 +#define WLC_GET_CHANNEL_SEL 215 +#define WLC_START_CHANNEL_SEL 216 +#define WLC_GET_VALID_CHANNELS 217 +#define WLC_GET_FAKEFRAG 218 +#define WLC_SET_FAKEFRAG 219 +#define WLC_GET_PWROUT_PERCENTAGE 220 +#define WLC_SET_PWROUT_PERCENTAGE 221 +#define WLC_SET_BAD_FRAME_PREEMPT 222 +#define WLC_GET_BAD_FRAME_PREEMPT 223 +#define WLC_SET_LEAP_LIST 224 +#define WLC_GET_LEAP_LIST 225 +#define WLC_GET_CWMIN 226 +#define WLC_SET_CWMIN 227 +#define WLC_GET_CWMAX 228 +#define WLC_SET_CWMAX 229 +#define WLC_GET_WET 230 +#define WLC_SET_WET 231 +#define WLC_GET_PUB 232 +/* #define WLC_SET_GLACIAL_TIMER 233 */ /* no longer supported */ +/* #define WLC_GET_GLACIAL_TIMER 234 */ /* no longer supported */ +#define WLC_GET_KEY_PRIMARY 235 +#define WLC_SET_KEY_PRIMARY 236 + + +/* #define WLC_DUMP_RADIOREGS 237 */ /* no longer supported */ +#define WLC_GET_ACI_ARGS 238 +#define WLC_SET_ACI_ARGS 239 +#define WLC_UNSET_CALLBACK 240 +#define WLC_SET_CALLBACK 241 +#define WLC_GET_RADAR 242 +#define WLC_SET_RADAR 243 +#define WLC_SET_SPECT_MANAGMENT 244 +#define WLC_GET_SPECT_MANAGMENT 245 +#define WLC_WDS_GET_REMOTE_HWADDR 246 /* handled in wl_linux.c/wl_vx.c */ +#define WLC_WDS_GET_WPA_SUP 247 +#define WLC_SET_CS_SCAN_TIMER 248 +#define WLC_GET_CS_SCAN_TIMER 249 +#define WLC_MEASURE_REQUEST 250 +#define WLC_INIT 251 +#define WLC_SEND_QUIET 252 +#define WLC_KEEPALIVE 253 +#define WLC_SEND_PWR_CONSTRAINT 254 +#define WLC_UPGRADE_STATUS 255 +#define WLC_CURRENT_PWR 256 +#define WLC_GET_SCAN_PASSIVE_TIME 257 +#define WLC_SET_SCAN_PASSIVE_TIME 258 +#define WLC_LEGACY_LINK_BEHAVIOR 259 +#define WLC_GET_CHANNELS_IN_COUNTRY 260 +#define WLC_GET_COUNTRY_LIST 261 +#define WLC_GET_VAR 262 /* get value of named variable */ +#define WLC_SET_VAR 263 /* set named variable to value */ +#define WLC_NVRAM_GET 264 /* deprecated */ +#define WLC_NVRAM_SET 265 +#define WLC_NVRAM_DUMP 266 +#define WLC_REBOOT 267 +#define WLC_SET_WSEC_PMK 268 +#define WLC_GET_AUTH_MODE 269 +#define WLC_SET_AUTH_MODE 270 +#define WLC_GET_WAKEENTRY 271 +#define WLC_SET_WAKEENTRY 272 +#define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */ +#define WLC_NVOTPW 274 +#define WLC_OTPW 275 +#define WLC_IOV_BLOCK_GET 276 +#define WLC_IOV_MODULES_GET 277 +#define WLC_SOFT_RESET 278 +#define WLC_GET_ALLOW_MODE 279 +#define WLC_SET_ALLOW_MODE 280 +#define WLC_GET_DESIRED_BSSID 281 +#define WLC_SET_DESIRED_BSSID 282 +#define WLC_DISASSOC_MYAP 283 +#define WLC_GET_NBANDS 284 /* for Dongle EXT_STA support */ +#define WLC_GET_BANDSTATES 285 /* for Dongle EXT_STA support */ +#define WLC_GET_WLC_BSS_INFO 286 /* for Dongle EXT_STA support */ +#define WLC_GET_ASSOC_INFO 287 /* for Dongle EXT_STA support */ +#define WLC_GET_OID_PHY 288 /* for Dongle EXT_STA support */ +#define WLC_SET_OID_PHY 289 /* for Dongle EXT_STA support */ +#define WLC_SET_ASSOC_TIME 290 /* for Dongle EXT_STA support */ +#define WLC_GET_DESIRED_SSID 291 /* for Dongle EXT_STA support */ +#define WLC_GET_CHANSPEC 292 /* for Dongle EXT_STA support */ +#define WLC_GET_ASSOC_STATE 293 /* for Dongle EXT_STA support */ +#define WLC_SET_PHY_STATE 294 /* for Dongle EXT_STA support */ +#define WLC_GET_SCAN_PENDING 295 /* for Dongle EXT_STA support */ +#define WLC_GET_SCANREQ_PENDING 296 /* for Dongle EXT_STA support */ +#define WLC_GET_PREV_ROAM_REASON 297 /* for Dongle EXT_STA support */ +#define WLC_SET_PREV_ROAM_REASON 298 /* for Dongle EXT_STA support */ +#define WLC_GET_BANDSTATES_PI 299 /* for Dongle EXT_STA support */ +#define WLC_GET_PHY_STATE 300 /* for Dongle EXT_STA support */ +#define WLC_GET_BSS_WPA_RSN 301 /* for Dongle EXT_STA support */ +#define WLC_GET_BSS_WPA2_RSN 302 /* for Dongle EXT_STA support */ +#define WLC_GET_BSS_BCN_TS 303 /* for Dongle EXT_STA support */ +#define WLC_GET_INT_DISASSOC 304 /* for Dongle EXT_STA support */ +#define WLC_SET_NUM_PEERS 305 /* for Dongle EXT_STA support */ +#define WLC_GET_NUM_BSS 306 /* for Dongle EXT_STA support */ +#define WLC_PHY_SAMPLE_COLLECT 307 /* phy sample collect mode */ +/* #define WLC_UM_PRIV 308 */ /* Deprecated: usermode driver */ +#define WLC_GET_CMD 309 +/* #define WLC_LAST 310 */ /* Never used - can be reused */ +#define WLC_SET_INTERFERENCE_OVERRIDE_MODE 311 /* set inter mode override */ +#define WLC_GET_INTERFERENCE_OVERRIDE_MODE 312 /* get inter mode override */ +/* #define WLC_GET_WAI_RESTRICT 313 */ /* for WAPI, deprecated use iovar instead */ +/* #define WLC_SET_WAI_RESTRICT 314 */ /* for WAPI, deprecated use iovar instead */ +/* #define WLC_SET_WAI_REKEY 315 */ /* for WAPI, deprecated use iovar instead */ +#define WLC_SET_NAT_CONFIG 316 /* for configuring NAT filter driver */ +#define WLC_GET_NAT_STATE 317 +#define WLC_GET_TXBF_RATESET 318 +#define WLC_SET_TXBF_RATESET 319 +#define WLC_SCAN_CQ 320 +#define WLC_GET_RSSI_QDB 321 /* qdB portion of the RSSI */ + +#define WLC_LAST 322 +#ifndef EPICTRL_COOKIE +#define EPICTRL_COOKIE 0xABADCEDE +#endif + +/* vx wlc ioctl's offset */ +#define CMN_IOCTL_OFF 0x180 + +/* + * custom OID support + * + * 0xFF - implementation specific OID + * 0xE4 - first byte of Broadcom PCI vendor ID + * 0x14 - second byte of Broadcom PCI vendor ID + * 0xXX - the custom OID number + */ + +/* begin 0x1f values beyond the start of the ET driver range. */ +#define WL_OID_BASE 0xFFE41420 + +/* NDIS overrides */ +#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE) +#define OID_WL_GET_FORCELINK (WL_OID_BASE + WLC_GET_FORCELINK) +#define OID_WL_SET_FORCELINK (WL_OID_BASE + WLC_SET_FORCELINK) +#define OID_WL_ENCRYPT_STRENGTH (WL_OID_BASE + WLC_ENCRYPT_STRENGTH) +#define OID_WL_DECRYPT_STATUS (WL_OID_BASE + WLC_DECRYPT_STATUS) +#define OID_LEGACY_LINK_BEHAVIOR (WL_OID_BASE + WLC_LEGACY_LINK_BEHAVIOR) +#define OID_WL_NDCONFIG_ITEM (WL_OID_BASE + WLC_NDCONFIG_ITEM) + +/* EXT_STA Dongle suuport */ +#define OID_STA_CHANSPEC (WL_OID_BASE + WLC_GET_CHANSPEC) +#define OID_STA_NBANDS (WL_OID_BASE + WLC_GET_NBANDS) +#define OID_STA_GET_PHY (WL_OID_BASE + WLC_GET_OID_PHY) +#define OID_STA_SET_PHY (WL_OID_BASE + WLC_SET_OID_PHY) +#define OID_STA_ASSOC_TIME (WL_OID_BASE + WLC_SET_ASSOC_TIME) +#define OID_STA_DESIRED_SSID (WL_OID_BASE + WLC_GET_DESIRED_SSID) +#define OID_STA_SET_PHY_STATE (WL_OID_BASE + WLC_SET_PHY_STATE) +#define OID_STA_SCAN_PENDING (WL_OID_BASE + WLC_GET_SCAN_PENDING) +#define OID_STA_SCANREQ_PENDING (WL_OID_BASE + WLC_GET_SCANREQ_PENDING) +#define OID_STA_GET_ROAM_REASON (WL_OID_BASE + WLC_GET_PREV_ROAM_REASON) +#define OID_STA_SET_ROAM_REASON (WL_OID_BASE + WLC_SET_PREV_ROAM_REASON) +#define OID_STA_GET_PHY_STATE (WL_OID_BASE + WLC_GET_PHY_STATE) +#define OID_STA_INT_DISASSOC (WL_OID_BASE + WLC_GET_INT_DISASSOC) +#define OID_STA_SET_NUM_PEERS (WL_OID_BASE + WLC_SET_NUM_PEERS) +#define OID_STA_GET_NUM_BSS (WL_OID_BASE + WLC_GET_NUM_BSS) + +/* NAT filter driver support */ +#define OID_NAT_SET_CONFIG (WL_OID_BASE + WLC_SET_NAT_CONFIG) +#define OID_NAT_GET_STATE (WL_OID_BASE + WLC_GET_NAT_STATE) + +#define WL_DECRYPT_STATUS_SUCCESS 1 +#define WL_DECRYPT_STATUS_FAILURE 2 +#define WL_DECRYPT_STATUS_UNKNOWN 3 + +/* allows user-mode app to poll the status of USB image upgrade */ +#define WLC_UPGRADE_SUCCESS 0 +#define WLC_UPGRADE_PENDING 1 + +/* WLC_GET_AUTH, WLC_SET_AUTH values */ +#define WL_AUTH_OPEN_SYSTEM 0 /* d11 open authentication */ +#define WL_AUTH_SHARED_KEY 1 /* d11 shared authentication */ +#define WL_AUTH_OPEN_SHARED 2 /* try open, then shared if open failed w/rc 13 */ + +/* a large TX Power as an init value to factor out of MIN() calculations, + * keep low enough to fit in an int8, units are .25 dBm + */ +#define WLC_TXPWR_MAX (127) /* ~32 dBm = 1,500 mW */ + +/* "diag" iovar argument and error code */ +#define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */ +#define WL_DIAG_LOOPBACK 2 /* d11 loopback data test */ +#define WL_DIAG_MEMORY 3 /* d11 memory test */ +#define WL_DIAG_LED 4 /* LED test */ +#define WL_DIAG_REG 5 /* d11/phy register test */ +#define WL_DIAG_SROM 6 /* srom read/crc test */ +#define WL_DIAG_DMA 7 /* DMA test */ +#define WL_DIAG_LOOPBACK_EXT 8 /* enhenced d11 loopback data test */ + +#define WL_DIAGERR_SUCCESS 0 +#define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */ +#define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */ +#define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */ +#define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */ +#define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */ +#define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */ +#define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */ +#define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */ +#define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */ +#define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */ + +#define WL_DIAGERR_MEMORY_TIMEOUT 11 /* d11 memory test didn't finish in time */ +#define WL_DIAGERR_MEMORY_BADPATTERN 12 /* d11 memory test result in bad pattern */ + +/* band types */ +#define WLC_BAND_AUTO 0 /* auto-select */ +#define WLC_BAND_5G 1 /* 5 Ghz */ +#define WLC_BAND_2G 2 /* 2.4 Ghz */ +#define WLC_BAND_ALL 3 /* all bands */ + +/* band range returned by band_range iovar */ +#define WL_CHAN_FREQ_RANGE_2G 0 +#define WL_CHAN_FREQ_RANGE_5GL 1 +#define WL_CHAN_FREQ_RANGE_5GM 2 +#define WL_CHAN_FREQ_RANGE_5GH 3 + +#define WL_CHAN_FREQ_RANGE_5GLL_5BAND 4 +#define WL_CHAN_FREQ_RANGE_5GLH_5BAND 5 +#define WL_CHAN_FREQ_RANGE_5GML_5BAND 6 +#define WL_CHAN_FREQ_RANGE_5GMH_5BAND 7 +#define WL_CHAN_FREQ_RANGE_5GH_5BAND 8 + +#define WL_CHAN_FREQ_RANGE_5G_BAND0 1 +#define WL_CHAN_FREQ_RANGE_5G_BAND1 2 +#define WL_CHAN_FREQ_RANGE_5G_BAND2 3 +#define WL_CHAN_FREQ_RANGE_5G_BAND3 4 + +#define WL_CHAN_FREQ_RANGE_5G_4BAND 5 + +/* MAC list modes */ +#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ +#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ +#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ + +/* + * 54g modes (basic bits may still be overridden) + * + * GMODE_LEGACY_B Rateset: 1b, 2b, 5.5, 11 + * Preamble: Long + * Shortslot: Off + * GMODE_AUTO Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 + * Extended Rateset: 6, 9, 12, 48 + * Preamble: Long + * Shortslot: Auto + * GMODE_ONLY Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 + * Extended Rateset: 6b, 9, 12b, 48 + * Preamble: Short required + * Shortslot: Auto + * GMODE_B_DEFERRED Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 + * Extended Rateset: 6, 9, 12, 48 + * Preamble: Long + * Shortslot: On + * GMODE_PERFORMANCE Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 + * Preamble: Short required + * Shortslot: On and required + * GMODE_LRS Rateset: 1b, 2b, 5.5b, 11b + * Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 + * Preamble: Long + * Shortslot: Auto + */ +#define GMODE_LEGACY_B 0 +#define GMODE_AUTO 1 +#define GMODE_ONLY 2 +#define GMODE_B_DEFERRED 3 +#define GMODE_PERFORMANCE 4 +#define GMODE_LRS 5 +#define GMODE_MAX 6 + +/* values for PLCPHdr_override */ +#define WLC_PLCP_AUTO -1 +#define WLC_PLCP_SHORT 0 +#define WLC_PLCP_LONG 1 + +/* values for g_protection_override and n_protection_override */ +#define WLC_PROTECTION_AUTO -1 +#define WLC_PROTECTION_OFF 0 +#define WLC_PROTECTION_ON 1 +#define WLC_PROTECTION_MMHDR_ONLY 2 +#define WLC_PROTECTION_CTS_ONLY 3 + +/* values for g_protection_control and n_protection_control */ +#define WLC_PROTECTION_CTL_OFF 0 +#define WLC_PROTECTION_CTL_LOCAL 1 +#define WLC_PROTECTION_CTL_OVERLAP 2 + +/* values for n_protection */ +#define WLC_N_PROTECTION_OFF 0 +#define WLC_N_PROTECTION_OPTIONAL 1 +#define WLC_N_PROTECTION_20IN40 2 +#define WLC_N_PROTECTION_MIXEDMODE 3 + +/* values for n_preamble_type */ +#define WLC_N_PREAMBLE_MIXEDMODE 0 +#define WLC_N_PREAMBLE_GF 1 +#define WLC_N_PREAMBLE_GF_BRCM 2 + +/* values for band specific 40MHz capabilities (deprecated) */ +#define WLC_N_BW_20ALL 0 +#define WLC_N_BW_40ALL 1 +#define WLC_N_BW_20IN2G_40IN5G 2 + +#define WLC_BW_20MHZ_BIT (1<<0) +#define WLC_BW_40MHZ_BIT (1<<1) +#define WLC_BW_80MHZ_BIT (1<<2) +#define WLC_BW_160MHZ_BIT (1<<3) + +/* Bandwidth capabilities */ +#define WLC_BW_CAP_20MHZ (WLC_BW_20MHZ_BIT) +#define WLC_BW_CAP_40MHZ (WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT) +#define WLC_BW_CAP_80MHZ (WLC_BW_80MHZ_BIT|WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT) +#define WLC_BW_CAP_160MHZ (WLC_BW_160MHZ_BIT|WLC_BW_80MHZ_BIT| \ + WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT) +#define WLC_BW_CAP_UNRESTRICTED 0xFF + +#define WL_BW_CAP_20MHZ(bw_cap) (((bw_cap) & WLC_BW_20MHZ_BIT) ? TRUE : FALSE) +#define WL_BW_CAP_40MHZ(bw_cap) (((bw_cap) & WLC_BW_40MHZ_BIT) ? TRUE : FALSE) +#define WL_BW_CAP_80MHZ(bw_cap) (((bw_cap) & WLC_BW_80MHZ_BIT) ? TRUE : FALSE) +#define WL_BW_CAP_160MHZ(bw_cap)(((bw_cap) & WLC_BW_160MHZ_BIT) ? TRUE : FALSE) + +/* values to force tx/rx chain */ +#define WLC_N_TXRX_CHAIN0 0 +#define WLC_N_TXRX_CHAIN1 1 + +/* bitflags for SGI support (sgi_rx iovar) */ +#define WLC_N_SGI_20 0x01 +#define WLC_N_SGI_40 0x02 +#define WLC_VHT_SGI_80 0x04 + +/* when sgi_tx==WLC_SGI_ALL, bypass rate selection, enable sgi for all mcs */ +#define WLC_SGI_ALL 0x02 + +#define LISTEN_INTERVAL 10 +/* interference mitigation options */ +#define INTERFERE_OVRRIDE_OFF -1 /* interference override off */ +#define INTERFERE_NONE 0 /* off */ +#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */ +#define WLAN_MANUAL 2 /* ACI: no auto detection */ +#define WLAN_AUTO 3 /* ACI: auto detect */ +#define WLAN_AUTO_W_NOISE 4 /* ACI: auto - detect and non 802.11 interference */ +#define AUTO_ACTIVE (1 << 7) /* Auto is currently active */ + +/* interfernece mode bit-masks (ACPHY) */ +#define ACPHY_ACI_GLITCHBASED_DESENSE 1 /* bit 0 */ +#define ACPHY_ACI_HWACI_PKTGAINLMT 2 /* bit 1 */ +#define ACPHY_ACI_W2NB_PKTGAINLMT 4 /* bit 2 */ +#define ACPHY_ACI_PREEMPTION 8 /* bit 3 */ +#define ACPHY_ACI_MAX_MODE 15 + +/* AP environment */ +#define AP_ENV_DETECT_NOT_USED 0 /* We aren't using AP environment detection */ +#define AP_ENV_DENSE 1 /* "Corporate" or other AP dense environment */ +#define AP_ENV_SPARSE 2 /* "Home" or other sparse environment */ +#define AP_ENV_INDETERMINATE 3 /* AP environment hasn't been identified */ + +#define TRIGGER_NOW 0 +#define TRIGGER_CRS 0x01 +#define TRIGGER_CRSDEASSERT 0x02 +#define TRIGGER_GOODFCS 0x04 +#define TRIGGER_BADFCS 0x08 +#define TRIGGER_BADPLCP 0x10 +#define TRIGGER_CRSGLITCH 0x20 + +#define WL_SAMPLEDATA_HEADER_TYPE 1 +#define WL_SAMPLEDATA_HEADER_SIZE 80 /* sample collect header size (bytes) */ +#define WL_SAMPLEDATA_TYPE 2 +#define WL_SAMPLEDATA_SEQ 0xff /* sequence # */ +#define WL_SAMPLEDATA_MORE_DATA 0x100 /* more data mask */ + +/* WL_OTA START */ +#define WL_OTA_ARG_PARSE_BLK_SIZE 1200 +#define WL_OTA_TEST_MAX_NUM_RATE 30 +#define WL_OTA_TEST_MAX_NUM_SEQ 100 + +#define WL_THRESHOLD_LO_BAND 70 /* range from 5250MHz - 5350MHz */ + +/* radar iovar SET defines */ +#define WL_RADAR_DETECTOR_OFF 0 /* radar detector off */ +#define WL_RADAR_DETECTOR_ON 1 /* radar detector on */ +#define WL_RADAR_SIMULATED 2 /* force radar detector to declare + * detection once + */ +#define WL_RSSI_ANT_VERSION 1 /* current version of wl_rssi_ant_t */ +#define WL_ANT_RX_MAX 2 /* max 2 receive antennas */ +#define WL_ANT_HT_RX_MAX 3 /* max 3 receive antennas/cores */ +#define WL_ANT_IDX_1 0 /* antenna index 1 */ +#define WL_ANT_IDX_2 1 /* antenna index 2 */ + +#ifndef WL_RSSI_ANT_MAX +#define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */ +#elif WL_RSSI_ANT_MAX != 4 +#error "WL_RSSI_ANT_MAX does not match" +#endif + +/* dfs_status iovar-related defines */ + +/* cac - channel availability check, + * ism - in-service monitoring + * csa - channel switching announcement + */ + +/* cac state values */ +#define WL_DFS_CACSTATE_IDLE 0 /* state for operating in non-radar channel */ +#define WL_DFS_CACSTATE_PREISM_CAC 1 /* CAC in progress */ +#define WL_DFS_CACSTATE_ISM 2 /* ISM in progress */ +#define WL_DFS_CACSTATE_CSA 3 /* csa */ +#define WL_DFS_CACSTATE_POSTISM_CAC 4 /* ISM CAC */ +#define WL_DFS_CACSTATE_PREISM_OOC 5 /* PREISM OOC */ +#define WL_DFS_CACSTATE_POSTISM_OOC 6 /* POSTISM OOC */ +#define WL_DFS_CACSTATES 7 /* this many states exist */ + +/* Defines used with channel_bandwidth for curpower */ +#define WL_BW_20MHZ 0 +#define WL_BW_40MHZ 1 +#define WL_BW_80MHZ 2 +#define WL_BW_160MHZ 3 + +/* tx_power_t.flags bits */ +#define WL_TX_POWER_F_ENABLED 1 +#define WL_TX_POWER_F_HW 2 +#define WL_TX_POWER_F_MIMO 4 +#define WL_TX_POWER_F_SISO 8 +#define WL_TX_POWER_F_HT 0x10 +#define WL_TX_POWER_F_VHT 0x20 +#define WL_TX_POWER_F_OPENLOOP 0x40 + +/* Message levels */ +#define WL_ERROR_VAL 0x00000001 +#define WL_TRACE_VAL 0x00000002 +#define WL_PRHDRS_VAL 0x00000004 +#define WL_PRPKT_VAL 0x00000008 +#define WL_INFORM_VAL 0x00000010 +#define WL_TMP_VAL 0x00000020 +#define WL_OID_VAL 0x00000040 +#define WL_RATE_VAL 0x00000080 +#define WL_ASSOC_VAL 0x00000100 +#define WL_PRUSR_VAL 0x00000200 +#define WL_PS_VAL 0x00000400 +#define WL_TXPWR_VAL 0x00000800 /* retired in TOT on 6/10/2009 */ +#define WL_PORT_VAL 0x00001000 +#define WL_DUAL_VAL 0x00002000 +#define WL_WSEC_VAL 0x00004000 +#define WL_WSEC_DUMP_VAL 0x00008000 +#define WL_LOG_VAL 0x00010000 +#define WL_NRSSI_VAL 0x00020000 /* retired in TOT on 6/10/2009 */ +#define WL_LOFT_VAL 0x00040000 /* retired in TOT on 6/10/2009 */ +#define WL_REGULATORY_VAL 0x00080000 +#define WL_PHYCAL_VAL 0x00100000 /* retired in TOT on 6/10/2009 */ +#define WL_RADAR_VAL 0x00200000 /* retired in TOT on 6/10/2009 */ +#define WL_MPC_VAL 0x00400000 +#define WL_APSTA_VAL 0x00800000 +#define WL_DFS_VAL 0x01000000 +#define WL_BA_VAL 0x02000000 /* retired in TOT on 6/14/2010 */ +#define WL_ACI_VAL 0x04000000 +#define WL_MBSS_VAL 0x04000000 +#define WL_CAC_VAL 0x08000000 +#define WL_AMSDU_VAL 0x10000000 +#define WL_AMPDU_VAL 0x20000000 +#define WL_FFPLD_VAL 0x40000000 + +/* wl_msg_level is full. For new bits take the next one and AND with + * wl_msg_level2 in wl_dbg.h + */ +#define WL_DPT_VAL 0x00000001 +#define WL_SCAN_VAL 0x00000002 +#define WL_WOWL_VAL 0x00000004 +#define WL_COEX_VAL 0x00000008 +#define WL_RTDC_VAL 0x00000010 +#define WL_PROTO_VAL 0x00000020 +#define WL_BTA_VAL 0x00000040 +#define WL_CHANINT_VAL 0x00000080 +#define WL_WMF_VAL 0x00000100 +#define WL_P2P_VAL 0x00000200 +#define WL_ITFR_VAL 0x00000400 +#define WL_MCHAN_VAL 0x00000800 +#define WL_TDLS_VAL 0x00001000 +#define WL_MCNX_VAL 0x00002000 +#define WL_PROT_VAL 0x00004000 +#define WL_PSTA_VAL 0x00008000 +#define WL_TSO_VAL 0x00010000 +#define WL_TRF_MGMT_VAL 0x00020000 +#define WL_LPC_VAL 0x00040000 +#define WL_L2FILTER_VAL 0x00080000 +#define WL_TXBF_VAL 0x00100000 +#define WL_P2PO_VAL 0x00200000 +#define WL_TBTT_VAL 0x00400000 +#define WL_NIC_VAL 0x00800000 +#define WL_MQ_VAL 0x01000000 + +/* This level is currently used in Phoenix2 only */ +#define WL_SRSCAN_VAL 0x02000000 + +#define WL_WNM_VAL 0x04000000 +#define WL_AWDL_VAL 0x08000000 +#define WL_PWRSEL_VAL 0x10000000 +#define WL_NET_DETECT_VAL 0x20000000 +#define WL_PCIE_VAL 0x40000000 + +/* use top-bit for WL_TIME_STAMP_VAL because this is a modifier + * rather than a message-type of its own + */ +#define WL_TIMESTAMP_VAL 0x80000000 + +/* max # of leds supported by GPIO (gpio pin# == led index#) */ +#define WL_LED_NUMGPIO 32 /* gpio 0-31 */ + +/* led per-pin behaviors */ +#define WL_LED_OFF 0 /* always off */ +#define WL_LED_ON 1 /* always on */ +#define WL_LED_ACTIVITY 2 /* activity */ +#define WL_LED_RADIO 3 /* radio enabled */ +#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */ +#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */ +#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */ +#define WL_LED_WI1 7 +#define WL_LED_WI2 8 +#define WL_LED_WI3 9 +#define WL_LED_ASSOC 10 /* associated state indicator */ +#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */ +#define WL_LED_ASSOCACT 12 /* on when associated; blink fast for activity */ +#define WL_LED_WI4 13 +#define WL_LED_WI5 14 +#define WL_LED_BLINKSLOW 15 /* blink slow */ +#define WL_LED_BLINKMED 16 /* blink med */ +#define WL_LED_BLINKFAST 17 /* blink fast */ +#define WL_LED_BLINKCUSTOM 18 /* blink custom */ +#define WL_LED_BLINKPERIODIC 19 /* blink periodic (custom 1000ms / off 400ms) */ +#define WL_LED_ASSOC_WITH_SEC 20 /* when connected with security */ + /* keep on for 300 sec */ +#define WL_LED_START_OFF 21 /* off upon boot, could be turned on later */ +#define WL_LED_WI6 22 +#define WL_LED_WI7 23 +#define WL_LED_WI8 24 +#define WL_LED_NUMBEHAVIOR 25 + +/* led behavior numeric value format */ +#define WL_LED_BEH_MASK 0x7f /* behavior mask */ +#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */ + +/* number of bytes needed to define a proper bit mask for MAC event reporting */ +#define BCMIO_ROUNDUP(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) +#define BCMIO_NBBY 8 +#define WL_EVENTING_MASK_LEN 16 + + +/* join preference types */ +#define WL_JOIN_PREF_RSSI 1 /* by RSSI */ +#define WL_JOIN_PREF_WPA 2 /* by akm and ciphers */ +#define WL_JOIN_PREF_BAND 3 /* by 802.11 band */ +#define WL_JOIN_PREF_RSSI_DELTA 4 /* by 802.11 band only if RSSI delta condition matches */ +#define WL_JOIN_PREF_TRANS_PREF 5 /* defined by requesting AP */ + +/* band preference */ +#define WLJP_BAND_ASSOC_PREF 255 /* use what WLC_SET_ASSOC_PREFER ioctl specifies */ + +/* any multicast cipher suite */ +#define WL_WPA_ACP_MCS_ANY "\x00\x00\x00\x00" + +/* 802.11h measurement types */ +#define WLC_MEASURE_TPC 1 +#define WLC_MEASURE_CHANNEL_BASIC 2 +#define WLC_MEASURE_CHANNEL_CCA 3 +#define WLC_MEASURE_CHANNEL_RPI 4 + +/* regulatory enforcement levels */ +#define SPECT_MNGMT_OFF 0 /* both 11h and 11d disabled */ +#define SPECT_MNGMT_LOOSE_11H 1 /* allow non-11h APs in scan lists */ +#define SPECT_MNGMT_STRICT_11H 2 /* prune out non-11h APs from scan list */ +#define SPECT_MNGMT_STRICT_11D 3 /* switch to 802.11D mode */ +/* SPECT_MNGMT_LOOSE_11H_D - same as SPECT_MNGMT_LOOSE with the exception that Country IE + * adoption is done regardless of capability spectrum_management + */ +#define SPECT_MNGMT_LOOSE_11H_D 4 /* operation defined above */ + +#define WL_CHAN_VALID_HW (1 << 0) /* valid with current HW */ +#define WL_CHAN_VALID_SW (1 << 1) /* valid with current country setting */ +#define WL_CHAN_BAND_5G (1 << 2) /* 5GHz-band channel */ +#define WL_CHAN_RADAR (1 << 3) /* radar sensitive channel */ +#define WL_CHAN_INACTIVE (1 << 4) /* temporarily inactive due to radar */ +#define WL_CHAN_PASSIVE (1 << 5) /* channel is in passive mode */ +#define WL_CHAN_RESTRICTED (1 << 6) /* restricted use channel */ + +/* BTC mode used by "btc_mode" iovar */ +#define WL_BTC_DISABLE 0 /* disable BT coexistence */ +#define WL_BTC_FULLTDM 1 /* full TDM COEX */ +#define WL_BTC_ENABLE 1 /* full TDM COEX to maintain backward compatiblity */ +#define WL_BTC_PREMPT 2 /* full TDM COEX with preemption */ +#define WL_BTC_LITE 3 /* light weight coex for large isolation platform */ +#define WL_BTC_PARALLEL 4 /* BT and WLAN run in parallel with separate antenna */ +#define WL_BTC_HYBRID 5 /* hybrid coex, only ack is allowed to transmit in BT slot */ +#define WL_BTC_DEFAULT 8 /* set the default mode for the device */ +#define WL_INF_BTC_DISABLE 0 +#define WL_INF_BTC_ENABLE 1 +#define WL_INF_BTC_AUTO 3 + +/* BTC wire used by "btc_wire" iovar */ +#define WL_BTC_DEFWIRE 0 /* use default wire setting */ +#define WL_BTC_2WIRE 2 /* use 2-wire BTC */ +#define WL_BTC_3WIRE 3 /* use 3-wire BTC */ +#define WL_BTC_4WIRE 4 /* use 4-wire BTC */ + +/* BTC flags: BTC configuration that can be set by host */ +#define WL_BTC_FLAG_PREMPT (1 << 0) +#define WL_BTC_FLAG_BT_DEF (1 << 1) +#define WL_BTC_FLAG_ACTIVE_PROT (1 << 2) +#define WL_BTC_FLAG_SIM_RSP (1 << 3) +#define WL_BTC_FLAG_PS_PROTECT (1 << 4) +#define WL_BTC_FLAG_SIM_TX_LP (1 << 5) +#define WL_BTC_FLAG_ECI (1 << 6) +#define WL_BTC_FLAG_LIGHT (1 << 7) +#define WL_BTC_FLAG_PARALLEL (1 << 8) + +/* maximum channels returned by the get valid channels iovar */ +#define WL_NUMCHANNELS 64 + +/* max number of chanspecs (used by the iovar to calc. buf space) */ +#define WL_NUMCHANSPECS 110 + +/* WDS link local endpoint WPA role */ +#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */ +#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */ +#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */ + +/* Base offset values */ +#define WL_PKT_FILTER_BASE_PKT 0 +#define WL_PKT_FILTER_BASE_END 1 +#define WL_PKT_FILTER_BASE_D11_H 2 /* May be removed */ +#define WL_PKT_FILTER_BASE_D11_D 3 /* May be removed */ +#define WL_PKT_FILTER_BASE_ETH_H 4 +#define WL_PKT_FILTER_BASE_ETH_D 5 +#define WL_PKT_FILTER_BASE_ARP_H 6 +#define WL_PKT_FILTER_BASE_ARP_D 7 /* May be removed */ +#define WL_PKT_FILTER_BASE_IP4_H 8 +#define WL_PKT_FILTER_BASE_IP4_D 9 +#define WL_PKT_FILTER_BASE_IP6_H 10 +#define WL_PKT_FILTER_BASE_IP6_D 11 +#define WL_PKT_FILTER_BASE_TCP_H 12 +#define WL_PKT_FILTER_BASE_TCP_D 13 /* May be removed */ +#define WL_PKT_FILTER_BASE_UDP_H 14 +#define WL_PKT_FILTER_BASE_UDP_D 15 +#define WL_PKT_FILTER_BASE_IP6_P 16 +#define WL_PKT_FILTER_BASE_COUNT 17 /* May be removed */ + +/* String mapping for bases that may be used by applications or debug */ +#define WL_PKT_FILTER_BASE_NAMES \ + { "START", WL_PKT_FILTER_BASE_PKT }, \ + { "END", WL_PKT_FILTER_BASE_END }, \ + { "ETH_H", WL_PKT_FILTER_BASE_ETH_H }, \ + { "ETH_D", WL_PKT_FILTER_BASE_ETH_D }, \ + { "D11_H", WL_PKT_FILTER_BASE_D11_H }, \ + { "D11_D", WL_PKT_FILTER_BASE_D11_D }, \ + { "ARP_H", WL_PKT_FILTER_BASE_ARP_H }, \ + { "IP4_H", WL_PKT_FILTER_BASE_IP4_H }, \ + { "IP4_D", WL_PKT_FILTER_BASE_IP4_D }, \ + { "IP6_H", WL_PKT_FILTER_BASE_IP6_H }, \ + { "IP6_D", WL_PKT_FILTER_BASE_IP6_D }, \ + { "IP6_P", WL_PKT_FILTER_BASE_IP6_P }, \ + { "TCP_H", WL_PKT_FILTER_BASE_TCP_H }, \ + { "TCP_D", WL_PKT_FILTER_BASE_TCP_D }, \ + { "UDP_H", WL_PKT_FILTER_BASE_UDP_H }, \ + { "UDP_D", WL_PKT_FILTER_BASE_UDP_D } + +/* Flags for a pattern list element */ +#define WL_PKT_FILTER_MFLAG_NEG 0x0001 + +/* + * Packet engine interface + */ + +#define WL_PKTENG_PER_TX_START 0x01 +#define WL_PKTENG_PER_TX_STOP 0x02 +#define WL_PKTENG_PER_RX_START 0x04 +#define WL_PKTENG_PER_RX_WITH_ACK_START 0x05 +#define WL_PKTENG_PER_TX_WITH_ACK_START 0x06 +#define WL_PKTENG_PER_RX_STOP 0x08 +#define WL_PKTENG_PER_MASK 0xff + +#define WL_PKTENG_SYNCHRONOUS 0x100 /* synchronous flag */ + +#define WL_PKTENG_MAXPKTSZ 16384 /* max pktsz limit for pkteng */ + +#define NUM_80211b_RATES 4 +#define NUM_80211ag_RATES 8 +#define NUM_80211n_RATES 32 +#define NUM_80211_RATES (NUM_80211b_RATES+NUM_80211ag_RATES+NUM_80211n_RATES) + +/* + * WOWL capability/override settings + */ +#define WL_WOWL_MAGIC (1 << 0) /* Wakeup on Magic packet */ +#define WL_WOWL_NET (1 << 1) /* Wakeup on Netpattern */ +#define WL_WOWL_DIS (1 << 2) /* Wakeup on loss-of-link due to Disassoc/Deauth */ +#define WL_WOWL_RETR (1 << 3) /* Wakeup on retrograde TSF */ +#define WL_WOWL_BCN (1 << 4) /* Wakeup on loss of beacon */ +#define WL_WOWL_TST (1 << 5) /* Wakeup after test */ +#define WL_WOWL_M1 (1 << 6) /* Wakeup after PTK refresh */ +#define WL_WOWL_EAPID (1 << 7) /* Wakeup after receipt of EAP-Identity Req */ +#define WL_WOWL_PME_GPIO (1 << 8) /* Wakeind via PME(0) or GPIO(1) */ +#define WL_WOWL_NEEDTKIP1 (1 << 9) /* need tkip phase 1 key to be updated by the driver */ +#define WL_WOWL_GTK_FAILURE (1 << 10) /* enable wakeup if GTK fails */ +#define WL_WOWL_EXTMAGPAT (1 << 11) /* support extended magic packets */ +#define WL_WOWL_ARPOFFLOAD (1 << 12) /* support ARP/NS/keepalive offloading */ +#define WL_WOWL_WPA2 (1 << 13) /* read protocol version for EAPOL frames */ +#define WL_WOWL_KEYROT (1 << 14) /* If the bit is set, use key rotaton */ +#define WL_WOWL_BCAST (1 << 15) /* If the bit is set, frm received was bcast frame */ +#define WL_WOWL_SCANOL (1 << 16) /* If the bit is set, scan offload is enabled */ +#define WL_WOWL_TCPKEEP_TIME (1 << 17) /* Wakeup on tcpkeep alive timeout */ +#define WL_WOWL_MDNS_CONFLICT (1 << 18) /* Wakeup on mDNS Conflict Resolution */ +#define WL_WOWL_MDNS_SERVICE (1 << 19) /* Wakeup on mDNS Service Connect */ +#define WL_WOWL_TCPKEEP_DATA (1 << 20) /* tcp keepalive got data */ +#define WL_WOWL_FW_HALT (1 << 21) /* Firmware died in wowl mode */ +#define WL_WOWL_ENAB_HWRADIO (1 << 22) /* Enable detection of radio button changes */ +#define WL_WOWL_MIC_FAIL (1 << 23) /* Offloads detected MIC failure(s) */ +#define WL_WOWL_LINKDOWN (1 << 31) /* Link Down indication in WoWL mode */ + +#define WL_WOWL_TCPKEEP (1 << 20) /* temp copy to satisfy automerger */ +#define MAGIC_PKT_MINLEN 102 /* Magic pkt min length is 6 * 0xFF + 16 * ETHER_ADDR_LEN */ + +#define WOWL_PATTEN_TYPE_ARP (1 << 0) /* ARP offload Pattern */ +#define WOWL_PATTEN_TYPE_NA (1 << 1) /* NA offload Pattern */ + +#define MAGIC_PKT_MINLEN 102 /* Magic pkt min length is 6 * 0xFF + 16 * ETHER_ADDR_LEN */ +#define MAGIC_PKT_NUM_MAC_ADDRS 16 + + +/* Overlap BSS Scan parameters default, minimum, maximum */ +#define WLC_OBSS_SCAN_PASSIVE_DWELL_DEFAULT 20 /* unit TU */ +#define WLC_OBSS_SCAN_PASSIVE_DWELL_MIN 5 /* unit TU */ +#define WLC_OBSS_SCAN_PASSIVE_DWELL_MAX 1000 /* unit TU */ +#define WLC_OBSS_SCAN_ACTIVE_DWELL_DEFAULT 10 /* unit TU */ +#define WLC_OBSS_SCAN_ACTIVE_DWELL_MIN 10 /* unit TU */ +#define WLC_OBSS_SCAN_ACTIVE_DWELL_MAX 1000 /* unit TU */ +#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_DEFAULT 300 /* unit Sec */ +#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_MIN 10 /* unit Sec */ +#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_MAX 900 /* unit Sec */ +#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_DEFAULT 5 +#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_MIN 5 +#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_MAX 100 +#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_DEFAULT 200 /* unit TU */ +#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_MIN 200 /* unit TU */ +#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_MAX 10000 /* unit TU */ +#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_DEFAULT 20 /* unit TU */ +#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_MIN 20 /* unit TU */ +#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_MAX 10000 /* unit TU */ +#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_DEFAULT 25 /* unit percent */ +#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_MIN 0 /* unit percent */ +#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_MAX 100 /* unit percent */ + +#define WL_MIN_NUM_OBSS_SCAN_ARG 7 /* minimum number of arguments required for OBSS Scan */ + +#define WL_COEX_INFO_MASK 0x07 +#define WL_COEX_INFO_REQ 0x01 +#define WL_COEX_40MHZ_INTOLERANT 0x02 +#define WL_COEX_WIDTH20 0x04 + +#define WLC_RSSI_INVALID 0 /* invalid RSSI value */ + +#define MAX_RSSI_LEVELS 8 + +/* **** EXTLOG **** */ +#define EXTLOG_CUR_VER 0x0100 + +#define MAX_ARGSTR_LEN 18 /* At least big enough for storing ETHER_ADDR_STR_LEN */ + +/* log modules (bitmap) */ +#define LOG_MODULE_COMMON 0x0001 +#define LOG_MODULE_ASSOC 0x0002 +#define LOG_MODULE_EVENT 0x0004 +#define LOG_MODULE_MAX 3 /* Update when adding module */ + +/* log levels */ +#define WL_LOG_LEVEL_DISABLE 0 +#define WL_LOG_LEVEL_ERR 1 +#define WL_LOG_LEVEL_WARN 2 +#define WL_LOG_LEVEL_INFO 3 +#define WL_LOG_LEVEL_MAX WL_LOG_LEVEL_INFO /* Update when adding level */ + +/* flag */ +#define LOG_FLAG_EVENT 1 + +/* log arg_type */ +#define LOG_ARGTYPE_NULL 0 +#define LOG_ARGTYPE_STR 1 /* %s */ +#define LOG_ARGTYPE_INT 2 /* %d */ +#define LOG_ARGTYPE_INT_STR 3 /* %d...%s */ +#define LOG_ARGTYPE_STR_INT 4 /* %s...%d */ + +/* 802.11 Mgmt Packet flags */ +#define VNDR_IE_BEACON_FLAG 0x1 +#define VNDR_IE_PRBRSP_FLAG 0x2 +#define VNDR_IE_ASSOCRSP_FLAG 0x4 +#define VNDR_IE_AUTHRSP_FLAG 0x8 +#define VNDR_IE_PRBREQ_FLAG 0x10 +#define VNDR_IE_ASSOCREQ_FLAG 0x20 +#define VNDR_IE_IWAPID_FLAG 0x40 /* vendor IE in IW advertisement protocol ID field */ +#define VNDR_IE_CUSTOM_FLAG 0x100 /* allow custom IE id */ + +#if defined(WLP2P) +/* P2P Action Frames flags (spec ordered) */ +#define VNDR_IE_GONREQ_FLAG 0x001000 +#define VNDR_IE_GONRSP_FLAG 0x002000 +#define VNDR_IE_GONCFM_FLAG 0x004000 +#define VNDR_IE_INVREQ_FLAG 0x008000 +#define VNDR_IE_INVRSP_FLAG 0x010000 +#define VNDR_IE_DISREQ_FLAG 0x020000 +#define VNDR_IE_DISRSP_FLAG 0x040000 +#define VNDR_IE_PRDREQ_FLAG 0x080000 +#define VNDR_IE_PRDRSP_FLAG 0x100000 + +#define VNDR_IE_P2PAF_SHIFT 12 +#endif /* WLP2P */ + +/* channel interference measurement (chanim) related defines */ + +/* chanim mode */ +#define CHANIM_DISABLE 0 /* disabled */ +#define CHANIM_DETECT 1 /* detection only */ +#define CHANIM_EXT 2 /* external state machine */ +#define CHANIM_ACT 3 /* full internal state machine, detect + act */ +#define CHANIM_MODE_MAX 4 + +/* define for apcs reason code */ +#define APCS_INIT 0 +#define APCS_IOCTL 1 +#define APCS_CHANIM 2 +#define APCS_CSTIMER 3 +#define APCS_BTA 4 +#define APCS_TXDLY 5 +#define APCS_NONACSD 6 +#define APCS_DFS_REENTRY 7 +#define APCS_TXFAIL 8 +#define APCS_MAX 9 + +/* number of ACS record entries */ +#define CHANIM_ACS_RECORD 10 + +/* CHANIM */ +#define CCASTATS_TXDUR 0 +#define CCASTATS_INBSS 1 +#define CCASTATS_OBSS 2 +#define CCASTATS_NOCTG 3 +#define CCASTATS_NOPKT 4 +#define CCASTATS_DOZE 5 +#define CCASTATS_TXOP 6 +#define CCASTATS_GDTXDUR 7 +#define CCASTATS_BDTXDUR 8 +#define CCASTATS_MAX 9 + +#define WL_CHANIM_COUNT_ALL 0xff +#define WL_CHANIM_COUNT_ONE 0x1 + +/* ap tpc modes */ +#define AP_TPC_OFF 0 +#define AP_TPC_BSS_PWR 1 /* BSS power control */ +#define AP_TPC_AP_PWR 2 /* AP power control */ +#define AP_TPC_AP_BSS_PWR 3 /* Both AP and BSS power control */ +#define AP_TPC_MAX_LINK_MARGIN 127 + +/* ap tpc modes */ +#define AP_TPC_OFF 0 +#define AP_TPC_BSS_PWR 1 /* BSS power control */ +#define AP_TPC_AP_PWR 2 /* AP power control */ +#define AP_TPC_AP_BSS_PWR 3 /* Both AP and BSS power control */ +#define AP_TPC_MAX_LINK_MARGIN 127 + +/* state */ +#define WL_P2P_DISC_ST_SCAN 0 +#define WL_P2P_DISC_ST_LISTEN 1 +#define WL_P2P_DISC_ST_SEARCH 2 + +/* i/f type */ +#define WL_P2P_IF_CLIENT 0 +#define WL_P2P_IF_GO 1 +#define WL_P2P_IF_DYNBCN_GO 2 +#define WL_P2P_IF_DEV 3 + +/* count */ +#define WL_P2P_SCHED_RSVD 0 +#define WL_P2P_SCHED_REPEAT 255 /* anything > 255 will be treated as 255 */ + +#define WL_P2P_SCHED_FIXED_LEN 3 + +/* schedule type */ +#define WL_P2P_SCHED_TYPE_ABS 0 /* Scheduled Absence */ +#define WL_P2P_SCHED_TYPE_REQ_ABS 1 /* Requested Absence */ + +/* schedule action during absence periods (for WL_P2P_SCHED_ABS type) */ +#define WL_P2P_SCHED_ACTION_NONE 0 /* no action */ +#define WL_P2P_SCHED_ACTION_DOZE 1 /* doze */ +/* schedule option - WL_P2P_SCHED_TYPE_REQ_ABS */ +#define WL_P2P_SCHED_ACTION_GOOFF 2 /* turn off GO beacon/prbrsp functions */ +/* schedule option - WL_P2P_SCHED_TYPE_XXX */ +#define WL_P2P_SCHED_ACTION_RESET 255 /* reset */ + +/* schedule option - WL_P2P_SCHED_TYPE_ABS */ +#define WL_P2P_SCHED_OPTION_NORMAL 0 /* normal start/interval/duration/count */ +#define WL_P2P_SCHED_OPTION_BCNPCT 1 /* percentage of beacon interval */ +/* schedule option - WL_P2P_SCHED_TYPE_REQ_ABS */ +#define WL_P2P_SCHED_OPTION_TSFOFS 2 /* normal start/internal/duration/count with + * start being an offset of the 'current' TSF + */ + +/* feature flags */ +#define WL_P2P_FEAT_GO_CSA (1 << 0) /* GO moves with the STA using CSA method */ +#define WL_P2P_FEAT_GO_NOLEGACY (1 << 1) /* GO does not probe respond to non-p2p probe + * requests + */ +#define WL_P2P_FEAT_RESTRICT_DEV_RESP (1 << 2) /* Restrict p2p dev interface from responding */ + +/* n-mode support capability */ +/* 2x2 includes both 1x1 & 2x2 devices + * reserved #define 2 for future when we want to separate 1x1 & 2x2 and + * control it independently + */ +#define WL_11N_2x2 1 +#define WL_11N_3x3 3 +#define WL_11N_4x4 4 + +/* define 11n feature disable flags */ +#define WLFEATURE_DISABLE_11N 0x00000001 +#define WLFEATURE_DISABLE_11N_STBC_TX 0x00000002 +#define WLFEATURE_DISABLE_11N_STBC_RX 0x00000004 +#define WLFEATURE_DISABLE_11N_SGI_TX 0x00000008 +#define WLFEATURE_DISABLE_11N_SGI_RX 0x00000010 +#define WLFEATURE_DISABLE_11N_AMPDU_TX 0x00000020 +#define WLFEATURE_DISABLE_11N_AMPDU_RX 0x00000040 +#define WLFEATURE_DISABLE_11N_GF 0x00000080 + +/* Proxy STA modes */ +#define PSTA_MODE_DISABLED 0 +#define PSTA_MODE_PROXY 1 +#define PSTA_MODE_REPEATER 2 + +/* op code in nat_cfg */ +#define NAT_OP_ENABLE 1 /* enable NAT on given interface */ +#define NAT_OP_DISABLE 2 /* disable NAT on given interface */ +#define NAT_OP_DISABLE_ALL 3 /* disable NAT on all interfaces */ + +/* NAT state */ +#define NAT_STATE_ENABLED 1 /* NAT is enabled */ +#define NAT_STATE_DISABLED 2 /* NAT is disabled */ + +#define CHANNEL_5G_LOW_START 36 /* 5G low (36..48) CDD enable/disable bit mask */ +#define CHANNEL_5G_MID_START 52 /* 5G mid (52..64) CDD enable/disable bit mask */ +#define CHANNEL_5G_HIGH_START 100 /* 5G high (100..140) CDD enable/disable bit mask */ +#define CHANNEL_5G_UPPER_START 149 /* 5G upper (149..161) CDD enable/disable bit mask */ + +/* D0 Coalescing */ +#define IPV4_ARP_FILTER 0x0001 +#define IPV4_NETBT_FILTER 0x0002 +#define IPV4_LLMNR_FILTER 0x0004 +#define IPV4_SSDP_FILTER 0x0008 +#define IPV4_WSD_FILTER 0x0010 +#define IPV6_NETBT_FILTER 0x0200 +#define IPV6_LLMNR_FILTER 0x0400 +#define IPV6_SSDP_FILTER 0x0800 +#define IPV6_WSD_FILTER 0x1000 + +/* Network Offload Engine */ +#define NWOE_OL_ENABLE 0x00000001 + +/* + * Traffic management structures/defines. + */ + +/* Traffic management bandwidth parameters */ +#define TRF_MGMT_MAX_PRIORITIES 3 + +#define TRF_MGMT_FLAG_ADD_DSCP 0x0001 /* Add DSCP to IP TOS field */ +#define TRF_MGMT_FLAG_DISABLE_SHAPING 0x0002 /* Don't shape traffic */ +#define TRF_MGMT_FLAG_MANAGE_LOCAL_TRAFFIC 0x0008 /* Manage traffic over our local subnet */ +#define TRF_MGMT_FLAG_FILTER_ON_MACADDR 0x0010 /* filter on MAC address */ +#define TRF_MGMT_FLAG_NO_RX 0x0020 /* do not apply fiters to rx packets */ + +#define TRF_FILTER_MAC_ADDR 0x0001 /* L2 filter use dst mac address for filtering */ +#define TRF_FILTER_IP_ADDR 0x0002 /* L3 filter use ip ddress for filtering */ +#define TRF_FILTER_L4 0x0004 /* L4 filter use tcp/udp for filtering */ +#define TRF_FILTER_DWM 0x0008 /* L3 filter use DSCP for filtering */ +#define TRF_FILTER_FAVORED 0x0010 /* Tag the packet FAVORED */ + +/* WNM/NPS subfeatures mask */ +#define WL_WNM_BSSTRANS 0x00000001 +#define WL_WNM_PROXYARP 0x00000002 +#define WL_WNM_MAXIDLE 0x00000004 +#define WL_WNM_TIMBC 0x00000008 +#define WL_WNM_TFS 0x00000010 +#define WL_WNM_SLEEP 0x00000020 +#define WL_WNM_DMS 0x00000040 +#define WL_WNM_FMS 0x00000080 +#define WL_WNM_NOTIF 0x00000100 +#define WL_WNM_MAX 0x00000200 + +#ifndef ETHER_MAX_DATA +#define ETHER_MAX_DATA 1500 +#endif /* ETHER_MAX_DATA */ + +/* Different discovery modes for dpt */ +#define DPT_DISCOVERY_MANUAL 0x01 /* manual discovery mode */ +#define DPT_DISCOVERY_AUTO 0x02 /* auto discovery mode */ +#define DPT_DISCOVERY_SCAN 0x04 /* scan-based discovery mode */ + +/* different path selection values */ +#define DPT_PATHSEL_AUTO 0 /* auto mode for path selection */ +#define DPT_PATHSEL_DIRECT 1 /* always use direct DPT path */ +#define DPT_PATHSEL_APPATH 2 /* always use AP path */ + +/* different ops for deny list */ +#define DPT_DENY_LIST_ADD 1 /* add to dpt deny list */ +#define DPT_DENY_LIST_REMOVE 2 /* remove from dpt deny list */ + +/* different ops for manual end point */ +#define DPT_MANUAL_EP_CREATE 1 /* create manual dpt endpoint */ +#define DPT_MANUAL_EP_MODIFY 2 /* modify manual dpt endpoint */ +#define DPT_MANUAL_EP_DELETE 3 /* delete manual dpt endpoint */ + +/* flags to indicate DPT status */ +#define DPT_STATUS_ACTIVE 0x01 /* link active (though may be suspended) */ +#define DPT_STATUS_AES 0x02 /* link secured through AES encryption */ +#define DPT_STATUS_FAILED 0x04 /* DPT link failed */ + +#ifdef WLTDLS +/* different ops for manual end point */ +#define TDLS_MANUAL_EP_CREATE 1 /* create manual dpt endpoint */ +#define TDLS_MANUAL_EP_MODIFY 2 /* modify manual dpt endpoint */ +#define TDLS_MANUAL_EP_DELETE 3 /* delete manual dpt endpoint */ +#define TDLS_MANUAL_EP_PM 4 /* put dpt endpoint in PM mode */ +#define TDLS_MANUAL_EP_WAKE 5 /* wake up dpt endpoint from PM */ +#define TDLS_MANUAL_EP_DISCOVERY 6 /* discover if endpoint is TDLS capable */ +#define TDLS_MANUAL_EP_CHSW 7 /* channel switch */ +#define TDLS_MANUAL_EP_WFD_TPQ 8 /* WiFi-Display Tunneled Probe reQuest */ + +/* modes */ +#define TDLS_WFD_IE_TX 0 +#define TDLS_WFD_IE_RX 1 +#define TDLS_WFD_PROBE_IE_TX 2 +#define TDLS_WFD_PROBE_IE_RX 3 +#endif /* WLTDLS */ + +/* define for flag */ +#define TSPEC_PENDING 0 /* TSPEC pending */ +#define TSPEC_ACCEPTED 1 /* TSPEC accepted */ +#define TSPEC_REJECTED 2 /* TSPEC rejected */ +#define TSPEC_UNKNOWN 3 /* TSPEC unknown */ +#define TSPEC_STATUS_MASK 7 /* TSPEC status mask */ + +#ifdef BCMCCX +/* "wlan_reason" iovar interface */ +#define WL_WLAN_ASSOC_REASON_NORMAL_NETWORK 0 /* normal WLAN network setup */ +#define WL_WLAN_ASSOC_REASON_ROAM_FROM_CELLULAR_NETWORK 1 /* roam from Cellular network */ +#define WL_WLAN_ASSOC_REASON_ROAM_FROM_LAN 2 /* roam from LAN */ +#define WL_WLAN_ASSOC_REASON_MAX 2 /* largest value allowed */ +#endif /* BCMCCX */ + +/* Software feature flag defines used by wlfeatureflag */ +#ifdef WLAFTERBURNER +#define WL_SWFL_ABBFL 0x0001 /* Allow Afterburner on systems w/o hardware BFL */ +#define WL_SWFL_ABENCORE 0x0002 /* Allow AB on non-4318E chips */ +#endif /* WLAFTERBURNER */ +#define WL_SWFL_NOHWRADIO 0x0004 +#define WL_SWFL_FLOWCONTROL 0x0008 /* Enable backpressure to OS stack */ +#define WL_SWFL_WLBSSSORT 0x0010 /* Per-port supports sorting of BSS */ + +#define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */ + +#define CSA_BROADCAST_ACTION_FRAME 0 /* csa broadcast action frame */ +#define CSA_UNICAST_ACTION_FRAME 1 /* csa unicast action frame */ + +/* Roaming trigger definitions for WLC_SET_ROAM_TRIGGER. + * + * (-100 < value < 0) value is used directly as a roaming trigger in dBm + * (0 <= value) value specifies a logical roaming trigger level from + * the list below + * + * WLC_GET_ROAM_TRIGGER always returns roaming trigger value in dBm, never + * the logical roam trigger value. + */ +#define WLC_ROAM_TRIGGER_DEFAULT 0 /* default roaming trigger */ +#define WLC_ROAM_TRIGGER_BANDWIDTH 1 /* optimize for bandwidth roaming trigger */ +#define WLC_ROAM_TRIGGER_DISTANCE 2 /* optimize for distance roaming trigger */ +#define WLC_ROAM_TRIGGER_AUTO 3 /* auto-detect environment */ +#define WLC_ROAM_TRIGGER_MAX_VALUE 3 /* max. valid value */ + +#define WLC_ROAM_NEVER_ROAM_TRIGGER (-100) /* Avoid Roaming by setting a large value */ + +/* Preferred Network Offload (PNO, formerly PFN) defines */ +#define WPA_AUTH_PFN_ANY 0xffffffff /* for PFN, match only ssid */ + +#define SORT_CRITERIA_BIT 0 +#define AUTO_NET_SWITCH_BIT 1 +#define ENABLE_BKGRD_SCAN_BIT 2 +#define IMMEDIATE_SCAN_BIT 3 +#define AUTO_CONNECT_BIT 4 +#define ENABLE_BD_SCAN_BIT 5 +#define ENABLE_ADAPTSCAN_BIT 6 +#define IMMEDIATE_EVENT_BIT 8 +#define SUPPRESS_SSID_BIT 9 +#define ENABLE_NET_OFFLOAD_BIT 10 + +#define SORT_CRITERIA_MASK 0x0001 +#define AUTO_NET_SWITCH_MASK 0x0002 +#define ENABLE_BKGRD_SCAN_MASK 0x0004 +#define IMMEDIATE_SCAN_MASK 0x0008 +#define AUTO_CONNECT_MASK 0x0010 + +#define ENABLE_BD_SCAN_MASK 0x0020 +#define ENABLE_ADAPTSCAN_MASK 0x00c0 +#define IMMEDIATE_EVENT_MASK 0x0100 +#define SUPPRESS_SSID_MASK 0x0200 +#define ENABLE_NET_OFFLOAD_MASK 0x0400 + +#define PFN_VERSION 2 +#define PFN_SCANRESULT_VERSION 1 +#define MAX_PFN_LIST_COUNT 16 + +#define PFN_COMPLETE 1 +#define PFN_INCOMPLETE 0 + +#define DEFAULT_BESTN 2 +#define DEFAULT_MSCAN 0 +#define DEFAULT_REPEAT 10 +#define DEFAULT_EXP 2 + +#define WL_PFN_SUPPRESSFOUND_MASK 0x08 +#define WL_PFN_SUPPRESSLOST_MASK 0x10 +#define WL_PFN_RSSI_MASK 0xff00 +#define WL_PFN_RSSI_SHIFT 8 + +#define WL_PFN_REPORT_ALLNET 0 +#define WL_PFN_REPORT_SSIDNET 1 +#define WL_PFN_REPORT_BSSIDNET 2 + +#define WL_PFN_CFG_FLAGS_PROHIBITED 0x00000001 /* Accept and use prohibited channels */ +#define WL_PFN_CFG_FLAGS_RESERVED 0xfffffffe /* Remaining reserved for future use */ + +#define WL_PFN_HIDDEN_BIT 2 +#define PNO_SCAN_MAX_FW 508*1000 /* max time scan time in msec */ +#define PNO_SCAN_MAX_FW_SEC PNO_SCAN_MAX_FW/1000 /* max time scan time in SEC */ +#define PNO_SCAN_MIN_FW_SEC 10 /* min time scan time in SEC */ +#define WL_PFN_HIDDEN_MASK 0x4 + +/* TCP Checksum Offload error injection for testing */ +#define TOE_ERRTEST_TX_CSUM 0x00000001 +#define TOE_ERRTEST_RX_CSUM 0x00000002 +#define TOE_ERRTEST_RX_CSUM2 0x00000004 + +/* ARP Offload feature flags for arp_ol iovar */ +#define ARP_OL_AGENT 0x00000001 +#define ARP_OL_SNOOP 0x00000002 +#define ARP_OL_HOST_AUTO_REPLY 0x00000004 +#define ARP_OL_PEER_AUTO_REPLY 0x00000008 + +/* ARP Offload error injection */ +#define ARP_ERRTEST_REPLY_PEER 0x1 +#define ARP_ERRTEST_REPLY_HOST 0x2 + +#define ARP_MULTIHOMING_MAX 8 /* Maximum local host IP addresses */ +#define ND_MULTIHOMING_MAX 10 /* Maximum local host IP addresses */ +#define ND_REQUEST_MAX 5 /* Max set of offload params */ + +/* AWDL AF flags for awdl_oob_af iovar */ +#define AWDL_OOB_AF_FILL_TSF_PARAMS 0x00000001 +#define AWDL_OOB_AF_FILL_SYNC_PARAMS 0x00000002 +#define AWDL_OOB_AF_FILL_ELECT_PARAMS 0x00000004 +#define AWDL_OOB_AF_PARAMS_SIZE 38 + +#define AWDL_OPMODE_AUTO 0 +#define AWDL_OPMODE_FIXED 1 + +#define AWDL_PEER_STATE_OPEN 0 +#define AWDL_PEER_STATE_CLOSE 1 + +#define SYNC_ROLE_SLAVE 0 +#define SYNC_ROLE_NE_MASTER 1 /* Non-election master */ +#define SYNC_ROLE_MASTER 2 + +/* peer opcode */ +#define AWDL_PEER_OP_ADD 0 +#define AWDL_PEER_OP_DEL 1 +#define AWDL_PEER_OP_INFO 2 +#define AWDL_PEER_OP_UPD 3 + +/* AOAC wake event flag */ +#define WAKE_EVENT_NLO_DISCOVERY_BIT 1 +#define WAKE_EVENT_AP_ASSOCIATION_LOST_BIT 2 +#define WAKE_EVENT_GTK_HANDSHAKE_ERROR_BIT 4 +#define WAKE_EVENT_4WAY_HANDSHAKE_REQUEST_BIT 8 + +#define MAX_NUM_WOL_PATTERN 16 /* LOGO requirements min 16 */ + +/* Packet filter operation mode */ +/* True: 1; False: 0 */ +#define PKT_FILTER_MODE_FORWARD_ON_MATCH 1 +/* Enable and disable pkt_filter as a whole */ +#define PKT_FILTER_MODE_DISABLE 2 +/* Cache first matched rx pkt(be queried by host later) */ +#define PKT_FILTER_MODE_PKT_CACHE_ON_MATCH 4 +/* If pkt_filter is enabled and no filter is set, don't forward anything */ +#define PKT_FILTER_MODE_PKT_FORWARD_OFF_DEFAULT 8 + +#ifdef DONGLEOVERLAYS +#define OVERLAY_IDX_MASK 0x000000ff +#define OVERLAY_IDX_SHIFT 0 +#define OVERLAY_FLAGS_MASK 0xffffff00 +#define OVERLAY_FLAGS_SHIFT 8 +/* overlay written to device memory immediately after loading the base image */ +#define OVERLAY_FLAG_POSTLOAD 0x100 +/* defer overlay download until the device responds w/WLC_E_OVL_DOWNLOAD event */ +#define OVERLAY_FLAG_DEFER_DL 0x200 +/* overlay downloaded prior to the host going to sleep */ +#define OVERLAY_FLAG_PRESLEEP 0x400 +#define OVERLAY_DOWNLOAD_CHUNKSIZE 1024 +#endif /* DONGLEOVERLAYS */ + +/* reuse two number in the sc/rc space */ +#define SMFS_CODE_MALFORMED 0xFFFE +#define SMFS_CODE_IGNORED 0xFFFD + +/* RFAWARE def */ +#define BCM_ACTION_RFAWARE 0x77 +#define BCM_ACTION_RFAWARE_DCS 0x01 + +/* DCS reason code define */ +#define BCM_DCS_IOVAR 0x1 +#define BCM_DCS_UNKNOWN 0xFF + + +#ifdef PROP_TXSTATUS +/* Bit definitions for tlv iovar */ +/* + * enable RSSI signals: + * WLFC_CTL_TYPE_RSSI + */ +#define WLFC_FLAGS_RSSI_SIGNALS 0x0001 + +/* enable (if/mac_open, if/mac_close,, mac_add, mac_del) signals: + * + * WLFC_CTL_TYPE_MAC_OPEN + * WLFC_CTL_TYPE_MAC_CLOSE + * + * WLFC_CTL_TYPE_INTERFACE_OPEN + * WLFC_CTL_TYPE_INTERFACE_CLOSE + * + * WLFC_CTL_TYPE_MACDESC_ADD + * WLFC_CTL_TYPE_MACDESC_DEL + * + */ +#define WLFC_FLAGS_XONXOFF_SIGNALS 0x0002 + +/* enable (status, fifo_credit, mac_credit) signals + * WLFC_CTL_TYPE_MAC_REQUEST_CREDIT + * WLFC_CTL_TYPE_TXSTATUS + * WLFC_CTL_TYPE_FIFO_CREDITBACK + */ +#define WLFC_FLAGS_CREDIT_STATUS_SIGNALS 0x0004 + +#define WLFC_FLAGS_HOST_PROPTXSTATUS_ACTIVE 0x0008 +#define WLFC_FLAGS_PSQ_GENERATIONFSM_ENABLE 0x0010 +#define WLFC_FLAGS_PSQ_ZERO_BUFFER_ENABLE 0x0020 +#define WLFC_FLAGS_HOST_RXRERODER_ACTIVE 0x0040 +#define WLFC_FLAGS_PKT_STAMP_SIGNALS 0x0080 + +#endif /* PROP_TXSTATUS */ + +#define WL_TIMBC_STATUS_AP_UNKNOWN 255 /* AP status for internal use only */ + +#define WL_DFRTS_LOGIC_OFF 0 /* Feature is disabled */ +#define WL_DFRTS_LOGIC_OR 1 /* OR all non-zero threshold conditions */ +#define WL_DFRTS_LOGIC_AND 2 /* AND all non-zero threshold conditions */ + +/* Definitions for Reliable Multicast */ +#define WL_RELMCAST_MAX_CLIENT 32 +#define WL_RELMCAST_FLAG_INBLACKLIST 1 +#define WL_RELMCAST_FLAG_ACTIVEACKER 2 +#define WL_RELMCAST_FLAG_RELMCAST 4 + +/* structures for proximity detection device role */ +#define WL_PROXD_MODE_DISABLE 0 +#define WL_PROXD_MODE_NEUTRAL 1 +#define WL_PROXD_MODE_INITIATOR 2 +#define WL_PROXD_MODE_TARGET 3 +#define WL_PROXD_RANDOM_WAKEUP 0x8000 + + +#ifdef NET_DETECT +#define NET_DETECT_MAX_WAKE_DATA_SIZE 2048 +#define NET_DETECT_MAX_PROFILES 16 +#define NET_DETECT_MAX_CHANNELS 50 +#endif /* NET_DETECT */ + +/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ +#define WL_RADIO_SW_DISABLE (1<<0) +#define WL_RADIO_HW_DISABLE (1<<1) +#define WL_RADIO_MPC_DISABLE (1<<2) +#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any channel */ + +#define WL_SPURAVOID_OFF 0 +#define WL_SPURAVOID_ON1 1 +#define WL_SPURAVOID_ON2 2 + + +#define WL_4335_SPURAVOID_ON1 1 +#define WL_4335_SPURAVOID_ON2 2 +#define WL_4335_SPURAVOID_ON3 3 +#define WL_4335_SPURAVOID_ON4 4 +#define WL_4335_SPURAVOID_ON5 5 +#define WL_4335_SPURAVOID_ON6 6 +#define WL_4335_SPURAVOID_ON7 7 +#define WL_4335_SPURAVOID_ON8 8 +#define WL_4335_SPURAVOID_ON9 9 + +/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ +#define WL_TXPWR_OVERRIDE (1U<<31) +#define WL_TXPWR_NEG (1U<<30) + + +/* phy types (returned by WLC_GET_PHYTPE) */ +#define WLC_PHY_TYPE_A 0 +#define WLC_PHY_TYPE_B 1 +#define WLC_PHY_TYPE_G 2 +#define WLC_PHY_TYPE_N 4 +#define WLC_PHY_TYPE_LP 5 +#define WLC_PHY_TYPE_SSN 6 +#define WLC_PHY_TYPE_HT 7 +#define WLC_PHY_TYPE_LCN 8 +#define WLC_PHY_TYPE_LCN40 10 +#define WLC_PHY_TYPE_AC 11 +#define WLC_PHY_TYPE_NULL 0xf + +/* Values for PM */ +#define PM_OFF 0 +#define PM_MAX 1 +#define PM_FAST 2 +#define PM_FORCE_OFF 3 /* use this bit to force PM off even bt is active */ + +#define WL_WME_CNT_VERSION 1 /* current version of wl_wme_cnt_t */ + +/* fbt_cap: FBT assoc / reassoc modes. */ +#define WLC_FBT_CAP_DRV_4WAY_AND_REASSOC 1 /* Driver 4-way handshake & reassoc (WLFBT). */ + +/* monitor_promisc_level bits */ +#define WL_MONPROMISC_PROMISC 0x0001 +#define WL_MONPROMISC_CTRL 0x0002 +#define WL_MONPROMISC_FCS 0x0004 + +/* TCP Checksum Offload defines */ +#define TOE_TX_CSUM_OL 0x00000001 +#define TOE_RX_CSUM_OL 0x00000002 + +#endif /* wlioctl_defs_h */ |