diff options
Diffstat (limited to 'drivers/net/wireless/bcmdhd/include/devctrl_if/wlioctl_defs.h')
| -rw-r--r-- | drivers/net/wireless/bcmdhd/include/devctrl_if/wlioctl_defs.h | 2055 |
1 files changed, 0 insertions, 2055 deletions
diff --git a/drivers/net/wireless/bcmdhd/include/devctrl_if/wlioctl_defs.h b/drivers/net/wireless/bcmdhd/include/devctrl_if/wlioctl_defs.h deleted file mode 100644 index 77e37fe..0000000 --- a/drivers/net/wireless/bcmdhd/include/devctrl_if/wlioctl_defs.h +++ /dev/null @@ -1,2055 +0,0 @@ -/* - * Custom OID/ioctl definitions for - * Broadcom 802.11abg Networking Device Driver - * - * Definitions subject to change without notice. - * - * Copyright (C) 1999-2014, Broadcom Corporation - * - * Unless you and Broadcom execute a separate written software license - * agreement governing use of this software, this software is licensed to you - * under the terms of the GNU General Public License version 2 (the "GPL"), - * available at http://www.broadcom.com/licenses/GPLv2.php, with the - * following added to such license: - * - * As a special exception, the copyright holders of this software give you - * permission to link this software with independent modules, and to copy and - * distribute the resulting executable under terms of your choice, provided that - * you also meet, for each linked independent module, the terms and conditions of - * the license of that module. An independent module is a module which is not - * derived from this software. The special exception does not apply to any - * modifications of the software. - * - * Notwithstanding the above, under no circumstances may you combine this - * software in any way with any other Broadcom software provided under a license - * other than the GPL, without Broadcom's express prior written consent. - * - * $Id: wlioctl_defs.h 403826 2013-05-22 16:40:55Z $ - */ - - -#ifndef wlioctl_defs_h -#define wlioctl_defs_h - - - - - -/* All builds use the new 11ac ratespec/chanspec */ -#undef D11AC_IOTYPES -#define D11AC_IOTYPES - -/* WL_RSPEC defines for rate information */ -#define WL_RSPEC_RATE_MASK 0x000000FF /* rate or HT MCS value */ -#define WL_RSPEC_VHT_MCS_MASK 0x0000000F /* VHT MCS value */ -#define WL_RSPEC_VHT_NSS_MASK 0x000000F0 /* VHT Nss value */ -#define WL_RSPEC_VHT_NSS_SHIFT 4 /* VHT Nss value shift */ -#define WL_RSPEC_TXEXP_MASK 0x00000300 -#define WL_RSPEC_TXEXP_SHIFT 8 -#define WL_RSPEC_BW_MASK 0x00070000 /* bandwidth mask */ -#define WL_RSPEC_BW_SHIFT 16 /* bandwidth shift */ -#define WL_RSPEC_STBC 0x00100000 /* STBC encoding, Nsts = 2 x Nss */ -#define WL_RSPEC_TXBF 0x00200000 /* bit indicates TXBF mode */ -#define WL_RSPEC_LDPC 0x00400000 /* bit indicates adv coding in use */ -#define WL_RSPEC_SGI 0x00800000 /* Short GI mode */ -#define WL_RSPEC_ENCODING_MASK 0x03000000 /* Encoding of Rate/MCS field */ -#define WL_RSPEC_OVERRIDE_RATE 0x40000000 /* bit indicate to override mcs only */ -#define WL_RSPEC_OVERRIDE_MODE 0x80000000 /* bit indicates override both rate & mode */ - -/* WL_RSPEC_ENCODING field defs */ -#define WL_RSPEC_ENCODE_RATE 0x00000000 /* Legacy rate is stored in RSPEC_RATE_MASK */ -#define WL_RSPEC_ENCODE_HT 0x01000000 /* HT MCS is stored in RSPEC_RATE_MASK */ -#define WL_RSPEC_ENCODE_VHT 0x02000000 /* VHT MCS and Nss is stored in RSPEC_RATE_MASK */ - -/* WL_RSPEC_BW field defs */ -#define WL_RSPEC_BW_UNSPECIFIED 0 -#define WL_RSPEC_BW_20MHZ 0x00010000 -#define WL_RSPEC_BW_40MHZ 0x00020000 -#define WL_RSPEC_BW_80MHZ 0x00030000 -#define WL_RSPEC_BW_160MHZ 0x00040000 - -/* Legacy defines for the nrate iovar */ -#define OLD_NRATE_MCS_INUSE 0x00000080 /* MSC in use,indicates b0-6 holds an mcs */ -#define OLD_NRATE_RATE_MASK 0x0000007f /* rate/mcs value */ -#define OLD_NRATE_STF_MASK 0x0000ff00 /* stf mode mask: siso, cdd, stbc, sdm */ -#define OLD_NRATE_STF_SHIFT 8 /* stf mode shift */ -#define OLD_NRATE_OVERRIDE 0x80000000 /* bit indicates override both rate & mode */ -#define OLD_NRATE_OVERRIDE_MCS_ONLY 0x40000000 /* bit indicate to override mcs only */ -#define OLD_NRATE_SGI 0x00800000 /* sgi mode */ -#define OLD_NRATE_LDPC_CODING 0x00400000 /* bit indicates adv coding in use */ - -#define OLD_NRATE_STF_SISO 0 /* stf mode SISO */ -#define OLD_NRATE_STF_CDD 1 /* stf mode CDD */ -#define OLD_NRATE_STF_STBC 2 /* stf mode STBC */ -#define OLD_NRATE_STF_SDM 3 /* stf mode SDM */ - -#define HIGHEST_SINGLE_STREAM_MCS 7 /* MCS values greater than this enable multiple streams */ - -#define MAX_CCA_CHANNELS 38 /* Max number of 20 Mhz wide channels */ -#define MAX_CCA_SECS 60 /* CCA keeps this many seconds history */ - -#define IBSS_MED 15 /* Mediom in-bss congestion percentage */ -#define IBSS_HI 25 /* Hi in-bss congestion percentage */ -#define OBSS_MED 12 -#define OBSS_HI 25 -#define INTERFER_MED 5 -#define INTERFER_HI 10 - -#define CCA_FLAG_2G_ONLY 0x01 /* Return a channel from 2.4 Ghz band */ -#define CCA_FLAG_5G_ONLY 0x02 /* Return a channel from 2.4 Ghz band */ -#define CCA_FLAG_IGNORE_DURATION 0x04 /* Ignore dwell time for each channel */ -#define CCA_FLAGS_PREFER_1_6_11 0x10 -#define CCA_FLAG_IGNORE_INTERFER 0x20 /* do not exlude channel based on interfer level */ - -#define CCA_ERRNO_BAND 1 /* After filtering for band pref, no choices left */ -#define CCA_ERRNO_DURATION 2 /* After filtering for duration, no choices left */ -#define CCA_ERRNO_PREF_CHAN 3 /* After filtering for chan pref, no choices left */ -#define CCA_ERRNO_INTERFER 4 /* After filtering for interference, no choices left */ -#define CCA_ERRNO_TOO_FEW 5 /* Only 1 channel was input */ - -#define WL_STA_AID(a) ((a) &~ 0xc000) - -/* Flags for sta_info_t indicating properties of STA */ -#define WL_STA_BRCM 0x00000001 /* Running a Broadcom driver */ -#define WL_STA_WME 0x00000002 /* WMM association */ -#define WL_STA_NONERP 0x00000004 /* No ERP */ -#define WL_STA_AUTHE 0x00000008 /* Authenticated */ -#define WL_STA_ASSOC 0x00000010 /* Associated */ -#define WL_STA_AUTHO 0x00000020 /* Authorized */ -#define WL_STA_WDS 0x00000040 /* Wireless Distribution System */ -#define WL_STA_WDS_LINKUP 0x00000080 /* WDS traffic/probes flowing properly */ -#define WL_STA_PS 0x00000100 /* STA is in power save mode from AP's viewpoint */ -#define WL_STA_APSD_BE 0x00000200 /* APSD delv/trigger for AC_BE is default enabled */ -#define WL_STA_APSD_BK 0x00000400 /* APSD delv/trigger for AC_BK is default enabled */ -#define WL_STA_APSD_VI 0x00000800 /* APSD delv/trigger for AC_VI is default enabled */ -#define WL_STA_APSD_VO 0x00001000 /* APSD delv/trigger for AC_VO is default enabled */ -#define WL_STA_N_CAP 0x00002000 /* STA 802.11n capable */ -#define WL_STA_SCBSTATS 0x00004000 /* Per STA debug stats */ -#define WL_STA_AMPDU_CAP 0x00008000 /* STA AMPDU capable */ -#define WL_STA_AMSDU_CAP 0x00010000 /* STA AMSDU capable */ -#define WL_STA_MIMO_PS 0x00020000 /* mimo ps mode is enabled */ -#define WL_STA_MIMO_RTS 0x00040000 /* send rts in mimo ps mode */ -#define WL_STA_RIFS_CAP 0x00080000 /* rifs enabled */ -#define WL_STA_VHT_CAP 0x00100000 /* STA VHT(11ac) capable */ -#define WL_STA_WPS 0x00200000 /* WPS state */ - -#define WL_WDS_LINKUP WL_STA_WDS_LINKUP /* deprecated */ - -/* STA HT cap fields */ -#define WL_STA_CAP_LDPC_CODING 0x0001 /* Support for rx of LDPC coded pkts */ -#define WL_STA_CAP_40MHZ 0x0002 /* FALSE:20Mhz, TRUE:20/40MHZ supported */ -#define WL_STA_CAP_MIMO_PS_MASK 0x000C /* Mimo PS mask */ -#define WL_STA_CAP_MIMO_PS_SHIFT 0x0002 /* Mimo PS shift */ -#define WL_STA_CAP_MIMO_PS_OFF 0x0003 /* Mimo PS, no restriction */ -#define WL_STA_CAP_MIMO_PS_RTS 0x0001 /* Mimo PS, send RTS/CTS around MIMO frames */ -#define WL_STA_CAP_MIMO_PS_ON 0x0000 /* Mimo PS, MIMO disallowed */ -#define WL_STA_CAP_GF 0x0010 /* Greenfield preamble support */ -#define WL_STA_CAP_SHORT_GI_20 0x0020 /* 20MHZ short guard interval support */ -#define WL_STA_CAP_SHORT_GI_40 0x0040 /* 40Mhz short guard interval support */ -#define WL_STA_CAP_TX_STBC 0x0080 /* Tx STBC support */ -#define WL_STA_CAP_RX_STBC_MASK 0x0300 /* Rx STBC mask */ -#define WL_STA_CAP_RX_STBC_SHIFT 8 /* Rx STBC shift */ -#define WL_STA_CAP_DELAYED_BA 0x0400 /* delayed BA support */ -#define WL_STA_CAP_MAX_AMSDU 0x0800 /* Max AMSDU size in bytes , 0=3839, 1=7935 */ -#define WL_STA_CAP_DSSS_CCK 0x1000 /* DSSS/CCK supported by the BSS */ -#define WL_STA_CAP_PSMP 0x2000 /* Power Save Multi Poll support */ -#define WL_STA_CAP_40MHZ_INTOLERANT 0x4000 /* 40MHz Intolerant */ -#define WL_STA_CAP_LSIG_TXOP 0x8000 /* L-SIG TXOP protection support */ - -#define WL_STA_CAP_RX_STBC_NO 0x0 /* no rx STBC support */ -#define WL_STA_CAP_RX_STBC_ONE_STREAM 0x1 /* rx STBC support of 1 spatial stream */ -#define WL_STA_CAP_RX_STBC_TWO_STREAM 0x2 /* rx STBC support of 1-2 spatial streams */ -#define WL_STA_CAP_RX_STBC_THREE_STREAM 0x3 /* rx STBC support of 1-3 spatial streams */ - -/* scb vht flags */ -#define WL_STA_VHT_LDPCCAP 0x0001 -#define WL_STA_SGI80 0x0002 -#define WL_STA_SGI160 0x0004 -#define WL_STA_VHT_TX_STBCCAP 0x0008 -#define WL_STA_VHT_RX_STBCCAP 0x0010 -#define WL_STA_SU_BEAMFORMER 0x0020 -#define WL_STA_SU_BEAMFORMEE 0x0040 -#define WL_STA_MU_BEAMFORMER 0x0080 -#define WL_STA_MU_BEAMFORMEE 0x0100 -#define WL_STA_VHT_TXOP_PS 0x0200 -#define WL_STA_HTC_VHT_CAP 0x0400 - -/* Values for TX Filter override mode */ -#define WLC_TXFILTER_OVERRIDE_DISABLED 0 -#define WLC_TXFILTER_OVERRIDE_ENABLED 1 - -#define WL_IOCTL_ACTION_GET 0x0 -#define WL_IOCTL_ACTION_SET 0x1 -#define WL_IOCTL_ACTION_OVL_IDX_MASK 0x1e -#define WL_IOCTL_ACTION_OVL_RSV 0x20 -#define WL_IOCTL_ACTION_OVL 0x40 -#define WL_IOCTL_ACTION_MASK 0x7e -#define WL_IOCTL_ACTION_OVL_SHIFT 1 - -#define WL_BSSTYPE_INFRA 1 -#define WL_BSSTYPE_INDEP 0 -#define WL_BSSTYPE_ANY 2 - -/* Bitmask for scan_type */ -#define WL_SCANFLAGS_PASSIVE 0x01 /* force passive scan */ -#define WL_SCANFLAGS_RESERVED 0x02 /* Reserved */ -#define WL_SCANFLAGS_PROHIBITED 0x04 /* allow scanning prohibited channels */ -#define WL_SCANFLAGS_OFFCHAN 0x08 /* allow scanning/reporting off-channel APs */ -#define WL_SCANFLAGS_HOTSPOT 0x10 /* automatic ANQP to hotspot APs */ - -/* wl_iscan_results status values */ -#define WL_SCAN_RESULTS_SUCCESS 0 -#define WL_SCAN_RESULTS_PARTIAL 1 -#define WL_SCAN_RESULTS_PENDING 2 -#define WL_SCAN_RESULTS_ABORTED 3 -#define WL_SCAN_RESULTS_NO_MEM 4 - -#define SCANOL_ENABLED (1 << 0) -#define SCANOL_BCAST_SSID (1 << 1) -#define SCANOL_NOTIFY_BCAST_SSID (1 << 2) -#define SCANOL_RESULTS_PER_CYCLE (1 << 3) - -/* scan times in milliseconds */ -#define SCANOL_HOME_TIME 45 /* for home channel processing */ -#define SCANOL_ASSOC_TIME 20 /* dwell on a channel while associated */ -#define SCANOL_UNASSOC_TIME 40 /* dwell on a channel while unassociated */ -#define SCANOL_PASSIVE_TIME 110 /* listen on a channelfor passive scan */ -#define SCANOL_AWAY_LIMIT 100 /* max time to be away from home channel */ -#define SCANOL_IDLE_REST_TIME 40 -#define SCANOL_IDLE_REST_MULTIPLIER 0 -#define SCANOL_ACTIVE_REST_TIME 20 -#define SCANOL_ACTIVE_REST_MULTIPLIER 0 -#define SCANOL_CYCLE_IDLE_REST_TIME 300000 /* Idle Rest Time between Scan Cycle (msec) */ -#define SCANOL_CYCLE_IDLE_REST_MULTIPLIER 0 /* Idle Rest Time Multiplier */ -#define SCANOL_CYCLE_ACTIVE_REST_TIME 200 -#define SCANOL_CYCLE_ACTIVE_REST_MULTIPLIER 0 -#define SCANOL_MAX_REST_TIME 3600000 /* max rest time between scan cycle (msec) */ -#define SCANOL_CYCLE_DEFAULT 0 /* default for Max Scan Cycle, 0 = forever */ -#define SCANOL_CYCLE_MAX 864000 /* Max Scan Cycle */ - /* 10 sec/scan cycle => 100 days */ -#define SCANOL_NPROBES 2 /* for Active scan; send n probes on each channel */ -#define SCANOL_NPROBES_MAX 5 /* for Active scan; send n probes on each channel */ -#define SCANOL_SCAN_START_DLY 10 /* delay start of offload scan (sec) */ -#define SCANOL_SCAN_START_DLY_MAX 240 /* delay start of offload scan (sec) */ -#define SCANOL_MULTIPLIER_MAX 10 /* Max Multiplier */ -#define SCANOL_UNASSOC_TIME_MAX 100 /* max dwell on a channel while unassociated */ -#define SCANOL_PASSIVE_TIME_MAX 500 /* max listen on a channel for passive scan */ -#define SCANOL_SSID_MAX 16 /* max supported preferred SSID */ - -/* masks for channel and ssid count */ -#define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff -#define WL_SCAN_PARAMS_NSSID_SHIFT 16 - -#define WL_SCAN_ACTION_START 1 -#define WL_SCAN_ACTION_CONTINUE 2 -#define WL_SCAN_ACTION_ABORT 3 - -#if defined(SIMPLE_ISCAN) -#define ISCAN_RETRY_CNT 5 -#define ISCAN_STATE_IDLE 0 -#define ISCAN_STATE_SCANING 1 -#define ISCAN_STATE_PENDING 2 -#endif /* SIMPLE_ISCAN */ - -#define ANTENNA_NUM_1 1 /* total number of antennas to be used */ -#define ANTENNA_NUM_2 2 -#define ANTENNA_NUM_3 3 -#define ANTENNA_NUM_4 4 - -#define ANT_SELCFG_AUTO 0x80 /* bit indicates antenna sel AUTO */ -#define ANT_SELCFG_MASK 0x33 /* antenna configuration mask */ -#define ANT_SELCFG_TX_UNICAST 0 /* unicast tx antenna configuration */ -#define ANT_SELCFG_RX_UNICAST 1 /* unicast rx antenna configuration */ -#define ANT_SELCFG_TX_DEF 2 /* default tx antenna configuration */ -#define ANT_SELCFG_RX_DEF 3 /* default rx antenna configuration */ - -/* interference source detection and identification mode */ -#define ITFR_MODE_DISABLE 0 /* disable feature */ -#define ITFR_MODE_MANUAL_ENABLE 1 /* enable manual detection */ -#define ITFR_MODE_AUTO_ENABLE 2 /* enable auto detection */ - -/* bit definitions for flags in interference source report */ -#define ITFR_INTERFERENCED 1 /* interference detected */ -#define ITFR_HOME_CHANNEL 2 /* home channel has interference */ -#define ITFR_NOISY_ENVIRONMENT 4 /* noisy environemnt so feature stopped */ - -#define WL_NUM_RPI_BINS 8 -#define WL_RM_TYPE_BASIC 1 -#define WL_RM_TYPE_CCA 2 -#define WL_RM_TYPE_RPI 3 - -#define WL_RM_FLAG_PARALLEL (1<<0) - -#define WL_RM_FLAG_LATE (1<<1) -#define WL_RM_FLAG_INCAPABLE (1<<2) -#define WL_RM_FLAG_REFUSED (1<<3) - -/* flags */ -#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */ - -#define WLC_CIS_DEFAULT 0 /* built-in default */ -#define WLC_CIS_SROM 1 /* source is sprom */ -#define WLC_CIS_OTP 2 /* source is otp */ - -/* PCL - Power Control Loop */ -/* current gain setting is replaced by user input */ -#define WL_ATTEN_APP_INPUT_PCL_OFF 0 /* turn off PCL, apply supplied input */ -#define WL_ATTEN_PCL_ON 1 /* turn on PCL */ -/* current gain setting is maintained */ -#define WL_ATTEN_PCL_OFF 2 /* turn off PCL. */ - -#define PLC_CMD_FAILOVER 1 -#define PLC_CMD_MAC_COST 2 -#define PLC_CMD_LINK_COST 3 -#define PLC_CMD_NODE_LIST 4 - -#define NODE_TYPE_UNKNOWN 0 /* Unknown link */ -#define NODE_TYPE_WIFI_ONLY 1 /* Pure Wireless STA node */ -#define NODE_TYPE_PLC_ONLY 2 /* Pure PLC only node */ -#define NODE_TYPE_WIFI_PLC 3 /* WiFi PLC capable node */ - -/* defines used by poweridx iovar - it controls power in a-band */ -/* current gain setting is maintained */ -#define WL_PWRIDX_PCL_OFF -2 /* turn off PCL. */ -#define WL_PWRIDX_PCL_ON -1 /* turn on PCL */ -#define WL_PWRIDX_LOWER_LIMIT -2 /* lower limit */ -#define WL_PWRIDX_UPPER_LIMIT 63 /* upper limit */ -/* value >= 0 causes - * - input to be set to that value - * - PCL to be off - */ - -#define BCM_MAC_STATUS_INDICATION (0x40010200L) - -/* Values for TX Filter override mode */ -#define WLC_TXFILTER_OVERRIDE_DISABLED 0 -#define WLC_TXFILTER_OVERRIDE_ENABLED 1 - -/* magic pattern used for mismatch driver and wl */ -#define WL_TXFIFO_SZ_MAGIC 0xa5a5 - -/* check this magic number */ -#define WLC_IOCTL_MAGIC 0x14e46c77 - -/* bss_info_cap_t flags */ -#define WL_BSS_FLAGS_FROM_BEACON 0x01 /* bss_info derived from beacon */ -#define WL_BSS_FLAGS_FROM_CACHE 0x02 /* bss_info collected from cache */ -#define WL_BSS_FLAGS_RSSI_ONCHANNEL 0x04 /* rssi info received on channel (vs offchannel) */ -#define WL_BSS_FLAGS_HS20 0x08 /* hotspot 2.0 capable */ -#define WL_BSS_FLAGS_RSSI_INVALID 0x10 /* BSS contains invalid RSSI */ -#define WL_BSS_FLAGS_RSSI_INACCURATE 0x20 /* BSS contains inaccurate RSSI */ - -/* bssinfo flag for nbss_cap */ -#define VHT_BI_SGI_80MHZ 0x00000100 -#define VHT_BI_80MHZ 0x00000200 -#define VHT_BI_160MHZ 0x00000400 -#define VHT_BI_8080MHZ 0x00000800 - -/* reference to wl_ioctl_t struct used by usermode driver */ -#define ioctl_subtype set /* subtype param */ -#define ioctl_pid used /* pid param */ -#define ioctl_status needed /* status param */ - - -/* Enumerate crypto algorithms */ -#define CRYPTO_ALGO_OFF 0 -#define CRYPTO_ALGO_WEP1 1 -#define CRYPTO_ALGO_TKIP 2 -#define CRYPTO_ALGO_WEP128 3 -#define CRYPTO_ALGO_AES_CCM 4 -#define CRYPTO_ALGO_AES_OCB_MSDU 5 -#define CRYPTO_ALGO_AES_OCB_MPDU 6 -#if !defined(BCMCCX) && !defined(BCMEXTCCX) -#define CRYPTO_ALGO_NALG 7 -#else -#define CRYPTO_ALGO_CKIP 7 -#define CRYPTO_ALGO_CKIP_MMH 8 -#define CRYPTO_ALGO_WEP_MMH 9 -#define CRYPTO_ALGO_NALG 10 -#endif /* !BCMCCX && !BCMEXTCCX */ - -#define CRYPTO_ALGO_SMS4 11 -#define CRYPTO_ALGO_PMK 12 /* for 802.1x supp to set PMK before 4-way */ -#define CRYPTO_ALGO_BIP 13 /* 802.11w BIP (aes cmac) */ - -#define CRYPTO_ALGO_AES_GCM 14 /* 128 bit GCM */ -#define CRYPTO_ALGO_AES_CCM256 15 /* 256 bit CCM */ -#define CRYPTO_ALGO_AES_GCM256 16 /* 256 bit GCM */ -#define CRYPTO_ALGO_BIP_CMAC256 17 /* 256 bit BIP CMAC */ -#define CRYPTO_ALGO_BIP_GMAC 18 /* 128 bit BIP GMAC */ -#define CRYPTO_ALGO_BIP_GMAC256 19 /* 256 bit BIP GMAC */ - -#define CRYPTO_ALGO_NONE CRYPTO_ALGO_OFF - -#define WSEC_GEN_MIC_ERROR 0x0001 -#define WSEC_GEN_REPLAY 0x0002 -#define WSEC_GEN_ICV_ERROR 0x0004 -#define WSEC_GEN_MFP_ACT_ERROR 0x0008 -#define WSEC_GEN_MFP_DISASSOC_ERROR 0x0010 -#define WSEC_GEN_MFP_DEAUTH_ERROR 0x0020 - -#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */ -#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ -#if defined(BCMCCX) || defined(BCMEXTCCX) -#define WL_CKIP_KP (1 << 4) /* CMIC */ -#define WL_CKIP_MMH (1 << 5) /* CKIP */ -#else -#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */ -#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */ -#endif /* BCMCCX || BCMEXTCCX */ -#define WL_IBSS_PEER_GROUP_KEY (1 << 6) /* Indicates a group key for a IBSS PEER */ - -/* wireless security bitvec */ -#define WEP_ENABLED 0x0001 -#define TKIP_ENABLED 0x0002 -#define AES_ENABLED 0x0004 -#define WSEC_SWFLAG 0x0008 -#ifdef BCMCCX -#define CKIP_KP_ENABLED 0x0010 -#define CKIP_MIC_ENABLED 0x0020 -#endif /* BCMCCX */ -#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */ -#ifdef BCMWAPI_WPI -#define SMS4_ENABLED 0x0100 -#endif /* BCMWAPI_WPI */ - -/* wsec macros for operating on the above definitions */ -#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED) -#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED) -#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED) - -#ifdef BCMCCX -#define WSEC_CKIP_KP_ENABLED(wsec) ((wsec) & CKIP_KP_ENABLED) -#define WSEC_CKIP_MIC_ENABLED(wsec) ((wsec) & CKIP_MIC_ENABLED) -#define WSEC_CKIP_ENABLED(wsec) ((wsec) & (CKIP_KP_ENABLED|CKIP_MIC_ENABLED)) - -#ifdef BCMWAPI_WPI -#define WSEC_ENABLED(wsec) \ - ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | CKIP_KP_ENABLED | \ - CKIP_MIC_ENABLED | SMS4_ENABLED)) -#else /* BCMWAPI_WPI */ -#define WSEC_ENABLED(wsec) \ - ((wsec) & \ - (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | CKIP_KP_ENABLED | CKIP_MIC_ENABLED)) -#endif /* BCMWAPI_WPI */ -#else /* defined BCMCCX */ -#ifdef BCMWAPI_WPI -#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | SMS4_ENABLED)) -#else /* BCMWAPI_WPI */ -#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED)) -#endif /* BCMWAPI_WPI */ -#endif /* BCMCCX */ -#define WSEC_SES_OW_ENABLED(wsec) ((wsec) & SES_OW_ENABLED) -#ifdef BCMWAPI_WAI -#define WSEC_SMS4_ENABLED(wsec) ((wsec) & SMS4_ENABLED) -#endif /* BCMWAPI_WAI */ - -#define MFP_CAPABLE 0x0200 -#define MFP_REQUIRED 0x0400 -#define MFP_SHA256 0x0800 /* a special configuration for STA for WIFI test tool */ - -/* WPA authentication mode bitvec */ -#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */ -#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */ -#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */ -#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */ -#if defined(BCMCCX) || defined(BCMEXTCCX) -#define WPA_AUTH_CCKM 0x0008 /* CCKM */ -#define WPA2_AUTH_CCKM 0x0010 /* CCKM2 */ -#endif /* BCMCCX || BCMEXTCCX */ -/* #define WPA_AUTH_8021X 0x0020 */ /* 802.1x, reserved */ -#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */ -#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */ -#define BRCM_AUTH_PSK 0x0100 /* BRCM specific PSK */ -#define BRCM_AUTH_DPT 0x0200 /* DPT PSK without group keys */ -#if defined(BCMWAPI_WAI) || defined(BCMWAPI_WPI) -#define WPA_AUTH_WAPI 0x0400 -#define WAPI_AUTH_NONE WPA_AUTH_NONE /* none (IBSS) */ -#define WAPI_AUTH_UNSPECIFIED 0x0400 /* over AS */ -#define WAPI_AUTH_PSK 0x0800 /* Pre-shared key */ -#endif /* BCMWAPI_WAI || BCMWAPI_WPI */ -#define WPA2_AUTH_MFP 0x1000 /* MFP (11w) in contrast to CCX */ -#define WPA2_AUTH_TPK 0x2000 /* TDLS Peer Key */ -#define WPA2_AUTH_FT 0x4000 /* Fast Transition. */ -#define WPA_AUTH_PFN_ANY 0xffffffff /* for PFN, match only ssid */ - -/* pmkid */ -#define MAXPMKID 16 - -#define WLC_IOCTL_MAXLEN 8192 /* max length ioctl buffer required */ -#define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */ -#define WLC_IOCTL_MEDLEN 1536 /* "med" length ioctl buffer required */ -#if defined(LCNCONF) || defined(LCN40CONF) -#define WLC_SAMPLECOLLECT_MAXLEN 8192 /* Max Sample Collect buffer */ -#else -#define WLC_SAMPLECOLLECT_MAXLEN 10240 /* Max Sample Collect buffer for two cores */ -#endif -#define WLC_SAMPLECOLLECT_MAXLEN_LCN40 8192 - -/* common ioctl definitions */ -#define WLC_GET_MAGIC 0 -#define WLC_GET_VERSION 1 -#define WLC_UP 2 -#define WLC_DOWN 3 -#define WLC_GET_LOOP 4 -#define WLC_SET_LOOP 5 -#define WLC_DUMP 6 -#define WLC_GET_MSGLEVEL 7 -#define WLC_SET_MSGLEVEL 8 -#define WLC_GET_PROMISC 9 -#define WLC_SET_PROMISC 10 -/* #define WLC_OVERLAY_IOCTL 11 */ /* not supported */ -#define WLC_GET_RATE 12 -#define WLC_GET_MAX_RATE 13 -#define WLC_GET_INSTANCE 14 -/* #define WLC_GET_FRAG 15 */ /* no longer supported */ -/* #define WLC_SET_FRAG 16 */ /* no longer supported */ -/* #define WLC_GET_RTS 17 */ /* no longer supported */ -/* #define WLC_SET_RTS 18 */ /* no longer supported */ -#define WLC_GET_INFRA 19 -#define WLC_SET_INFRA 20 -#define WLC_GET_AUTH 21 -#define WLC_SET_AUTH 22 -#define WLC_GET_BSSID 23 -#define WLC_SET_BSSID 24 -#define WLC_GET_SSID 25 -#define WLC_SET_SSID 26 -#define WLC_RESTART 27 -#define WLC_TERMINATED 28 -/* #define WLC_DUMP_SCB 28 */ /* no longer supported */ -#define WLC_GET_CHANNEL 29 -#define WLC_SET_CHANNEL 30 -#define WLC_GET_SRL 31 -#define WLC_SET_SRL 32 -#define WLC_GET_LRL 33 -#define WLC_SET_LRL 34 -#define WLC_GET_PLCPHDR 35 -#define WLC_SET_PLCPHDR 36 -#define WLC_GET_RADIO 37 -#define WLC_SET_RADIO 38 -#define WLC_GET_PHYTYPE 39 -#define WLC_DUMP_RATE 40 -#define WLC_SET_RATE_PARAMS 41 -#define WLC_GET_FIXRATE 42 -#define WLC_SET_FIXRATE 43 -/* #define WLC_GET_WEP 42 */ /* no longer supported */ -/* #define WLC_SET_WEP 43 */ /* no longer supported */ -#define WLC_GET_KEY 44 -#define WLC_SET_KEY 45 -#define WLC_GET_REGULATORY 46 -#define WLC_SET_REGULATORY 47 -#define WLC_GET_PASSIVE_SCAN 48 -#define WLC_SET_PASSIVE_SCAN 49 -#define WLC_SCAN 50 -#define WLC_SCAN_RESULTS 51 -#define WLC_DISASSOC 52 -#define WLC_REASSOC 53 -#define WLC_GET_ROAM_TRIGGER 54 -#define WLC_SET_ROAM_TRIGGER 55 -#define WLC_GET_ROAM_DELTA 56 -#define WLC_SET_ROAM_DELTA 57 -#define WLC_GET_ROAM_SCAN_PERIOD 58 -#define WLC_SET_ROAM_SCAN_PERIOD 59 -#define WLC_EVM 60 /* diag */ -#define WLC_GET_TXANT 61 -#define WLC_SET_TXANT 62 -#define WLC_GET_ANTDIV 63 -#define WLC_SET_ANTDIV 64 -/* #define WLC_GET_TXPWR 65 */ /* no longer supported */ -/* #define WLC_SET_TXPWR 66 */ /* no longer supported */ -#define WLC_GET_CLOSED 67 -#define WLC_SET_CLOSED 68 -#define WLC_GET_MACLIST 69 -#define WLC_SET_MACLIST 70 -#define WLC_GET_RATESET 71 -#define WLC_SET_RATESET 72 -/* #define WLC_GET_LOCALE 73 */ /* no longer supported */ -#define WLC_LONGTRAIN 74 -#define WLC_GET_BCNPRD 75 -#define WLC_SET_BCNPRD 76 -#define WLC_GET_DTIMPRD 77 -#define WLC_SET_DTIMPRD 78 -#define WLC_GET_SROM 79 -#define WLC_SET_SROM 80 -#define WLC_GET_WEP_RESTRICT 81 -#define WLC_SET_WEP_RESTRICT 82 -#define WLC_GET_COUNTRY 83 -#define WLC_SET_COUNTRY 84 -#define WLC_GET_PM 85 -#define WLC_SET_PM 86 -#define WLC_GET_WAKE 87 -#define WLC_SET_WAKE 88 -/* #define WLC_GET_D11CNTS 89 */ /* -> "counters" iovar */ -#define WLC_GET_FORCELINK 90 /* ndis only */ -#define WLC_SET_FORCELINK 91 /* ndis only */ -#define WLC_FREQ_ACCURACY 92 /* diag */ -#define WLC_CARRIER_SUPPRESS 93 /* diag */ -#define WLC_GET_PHYREG 94 -#define WLC_SET_PHYREG 95 -#define WLC_GET_RADIOREG 96 -#define WLC_SET_RADIOREG 97 -#define WLC_GET_REVINFO 98 -#define WLC_GET_UCANTDIV 99 -#define WLC_SET_UCANTDIV 100 -#define WLC_R_REG 101 -#define WLC_W_REG 102 -/* #define WLC_DIAG_LOOPBACK 103 old tray diag */ -/* #define WLC_RESET_D11CNTS 104 */ /* -> "reset_d11cnts" iovar */ -#define WLC_GET_MACMODE 105 -#define WLC_SET_MACMODE 106 -#define WLC_GET_MONITOR 107 -#define WLC_SET_MONITOR 108 -#define WLC_GET_GMODE 109 -#define WLC_SET_GMODE 110 -#define WLC_GET_LEGACY_ERP 111 -#define WLC_SET_LEGACY_ERP 112 -#define WLC_GET_RX_ANT 113 -#define WLC_GET_CURR_RATESET 114 /* current rateset */ -#define WLC_GET_SCANSUPPRESS 115 -#define WLC_SET_SCANSUPPRESS 116 -#define WLC_GET_AP 117 -#define WLC_SET_AP 118 -#define WLC_GET_EAP_RESTRICT 119 -#define WLC_SET_EAP_RESTRICT 120 -#define WLC_SCB_AUTHORIZE 121 -#define WLC_SCB_DEAUTHORIZE 122 -#define WLC_GET_WDSLIST 123 -#define WLC_SET_WDSLIST 124 -#define WLC_GET_ATIM 125 -#define WLC_SET_ATIM 126 -#define WLC_GET_RSSI 127 -#define WLC_GET_PHYANTDIV 128 -#define WLC_SET_PHYANTDIV 129 -#define WLC_AP_RX_ONLY 130 -#define WLC_GET_TX_PATH_PWR 131 -#define WLC_SET_TX_PATH_PWR 132 -#define WLC_GET_WSEC 133 -#define WLC_SET_WSEC 134 -#define WLC_GET_PHY_NOISE 135 -#define WLC_GET_BSS_INFO 136 -#define WLC_GET_PKTCNTS 137 -#define WLC_GET_LAZYWDS 138 -#define WLC_SET_LAZYWDS 139 -#define WLC_GET_BANDLIST 140 - -#define WLC_GET_BAND 141 -#define WLC_SET_BAND 142 -#define WLC_SCB_DEAUTHENTICATE 143 -#define WLC_GET_SHORTSLOT 144 -#define WLC_GET_SHORTSLOT_OVERRIDE 145 -#define WLC_SET_SHORTSLOT_OVERRIDE 146 -#define WLC_GET_SHORTSLOT_RESTRICT 147 -#define WLC_SET_SHORTSLOT_RESTRICT 148 -#define WLC_GET_GMODE_PROTECTION 149 -#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 -#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 -#define WLC_UPGRADE 152 -/* #define WLC_GET_MRATE 153 */ /* no longer supported */ -/* #define WLC_SET_MRATE 154 */ /* no longer supported */ -#define WLC_GET_IGNORE_BCNS 155 -#define WLC_SET_IGNORE_BCNS 156 -#define WLC_GET_SCB_TIMEOUT 157 -#define WLC_SET_SCB_TIMEOUT 158 -#define WLC_GET_ASSOCLIST 159 -#define WLC_GET_CLK 160 -#define WLC_SET_CLK 161 -#define WLC_GET_UP 162 -#define WLC_OUT 163 -#define WLC_GET_WPA_AUTH 164 -#define WLC_SET_WPA_AUTH 165 -#define WLC_GET_UCFLAGS 166 -#define WLC_SET_UCFLAGS 167 -#define WLC_GET_PWRIDX 168 -#define WLC_SET_PWRIDX 169 -#define WLC_GET_TSSI 170 -#define WLC_GET_SUP_RATESET_OVERRIDE 171 -#define WLC_SET_SUP_RATESET_OVERRIDE 172 -/* #define WLC_SET_FAST_TIMER 173 */ /* no longer supported */ -/* #define WLC_GET_FAST_TIMER 174 */ /* no longer supported */ -/* #define WLC_SET_SLOW_TIMER 175 */ /* no longer supported */ -/* #define WLC_GET_SLOW_TIMER 176 */ /* no longer supported */ -/* #define WLC_DUMP_PHYREGS 177 */ /* no longer supported */ -#define WLC_GET_PROTECTION_CONTROL 178 -#define WLC_SET_PROTECTION_CONTROL 179 -#define WLC_GET_PHYLIST 180 -#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */ -#define WLC_DECRYPT_STATUS 182 /* ndis only */ -#define WLC_GET_KEY_SEQ 183 -#define WLC_GET_SCAN_CHANNEL_TIME 184 -#define WLC_SET_SCAN_CHANNEL_TIME 185 -#define WLC_GET_SCAN_UNASSOC_TIME 186 -#define WLC_SET_SCAN_UNASSOC_TIME 187 -#define WLC_GET_SCAN_HOME_TIME 188 -#define WLC_SET_SCAN_HOME_TIME 189 -#define WLC_GET_SCAN_NPROBES 190 -#define WLC_SET_SCAN_NPROBES 191 -#define WLC_GET_PRB_RESP_TIMEOUT 192 -#define WLC_SET_PRB_RESP_TIMEOUT 193 -#define WLC_GET_ATTEN 194 -#define WLC_SET_ATTEN 195 -#define WLC_GET_SHMEM 196 /* diag */ -#define WLC_SET_SHMEM 197 /* diag */ -/* #define WLC_GET_GMODE_PROTECTION_CTS 198 */ /* no longer supported */ -/* #define WLC_SET_GMODE_PROTECTION_CTS 199 */ /* no longer supported */ -#define WLC_SET_WSEC_TEST 200 -#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201 -#define WLC_TKIP_COUNTERMEASURES 202 -#define WLC_GET_PIOMODE 203 -#define WLC_SET_PIOMODE 204 -#define WLC_SET_ASSOC_PREFER 205 -#define WLC_GET_ASSOC_PREFER 206 -#define WLC_SET_ROAM_PREFER 207 -#define WLC_GET_ROAM_PREFER 208 -#define WLC_SET_LED 209 -#define WLC_GET_LED 210 -#define WLC_GET_INTERFERENCE_MODE 211 -#define WLC_SET_INTERFERENCE_MODE 212 -#define WLC_GET_CHANNEL_QA 213 -#define WLC_START_CHANNEL_QA 214 -#define WLC_GET_CHANNEL_SEL 215 -#define WLC_START_CHANNEL_SEL 216 -#define WLC_GET_VALID_CHANNELS 217 -#define WLC_GET_FAKEFRAG 218 -#define WLC_SET_FAKEFRAG 219 -#define WLC_GET_PWROUT_PERCENTAGE 220 -#define WLC_SET_PWROUT_PERCENTAGE 221 -#define WLC_SET_BAD_FRAME_PREEMPT 222 -#define WLC_GET_BAD_FRAME_PREEMPT 223 -#define WLC_SET_LEAP_LIST 224 -#define WLC_GET_LEAP_LIST 225 -#define WLC_GET_CWMIN 226 -#define WLC_SET_CWMIN 227 -#define WLC_GET_CWMAX 228 -#define WLC_SET_CWMAX 229 -#define WLC_GET_WET 230 -#define WLC_SET_WET 231 -#define WLC_GET_PUB 232 -/* #define WLC_SET_GLACIAL_TIMER 233 */ /* no longer supported */ -/* #define WLC_GET_GLACIAL_TIMER 234 */ /* no longer supported */ -#define WLC_GET_KEY_PRIMARY 235 -#define WLC_SET_KEY_PRIMARY 236 - - -/* #define WLC_DUMP_RADIOREGS 237 */ /* no longer supported */ -#define WLC_GET_ACI_ARGS 238 -#define WLC_SET_ACI_ARGS 239 -#define WLC_UNSET_CALLBACK 240 -#define WLC_SET_CALLBACK 241 -#define WLC_GET_RADAR 242 -#define WLC_SET_RADAR 243 -#define WLC_SET_SPECT_MANAGMENT 244 -#define WLC_GET_SPECT_MANAGMENT 245 -#define WLC_WDS_GET_REMOTE_HWADDR 246 /* handled in wl_linux.c/wl_vx.c */ -#define WLC_WDS_GET_WPA_SUP 247 -#define WLC_SET_CS_SCAN_TIMER 248 -#define WLC_GET_CS_SCAN_TIMER 249 -#define WLC_MEASURE_REQUEST 250 -#define WLC_INIT 251 -#define WLC_SEND_QUIET 252 -#define WLC_KEEPALIVE 253 -#define WLC_SEND_PWR_CONSTRAINT 254 -#define WLC_UPGRADE_STATUS 255 -#define WLC_CURRENT_PWR 256 -#define WLC_GET_SCAN_PASSIVE_TIME 257 -#define WLC_SET_SCAN_PASSIVE_TIME 258 -#define WLC_LEGACY_LINK_BEHAVIOR 259 -#define WLC_GET_CHANNELS_IN_COUNTRY 260 -#define WLC_GET_COUNTRY_LIST 261 -#define WLC_GET_VAR 262 /* get value of named variable */ -#define WLC_SET_VAR 263 /* set named variable to value */ -#define WLC_NVRAM_GET 264 /* deprecated */ -#define WLC_NVRAM_SET 265 -#define WLC_NVRAM_DUMP 266 -#define WLC_REBOOT 267 -#define WLC_SET_WSEC_PMK 268 -#define WLC_GET_AUTH_MODE 269 -#define WLC_SET_AUTH_MODE 270 -#define WLC_GET_WAKEENTRY 271 -#define WLC_SET_WAKEENTRY 272 -#define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */ -#define WLC_NVOTPW 274 -#define WLC_OTPW 275 -#define WLC_IOV_BLOCK_GET 276 -#define WLC_IOV_MODULES_GET 277 -#define WLC_SOFT_RESET 278 -#define WLC_GET_ALLOW_MODE 279 -#define WLC_SET_ALLOW_MODE 280 -#define WLC_GET_DESIRED_BSSID 281 -#define WLC_SET_DESIRED_BSSID 282 -#define WLC_DISASSOC_MYAP 283 -#define WLC_GET_NBANDS 284 /* for Dongle EXT_STA support */ -#define WLC_GET_BANDSTATES 285 /* for Dongle EXT_STA support */ -#define WLC_GET_WLC_BSS_INFO 286 /* for Dongle EXT_STA support */ -#define WLC_GET_ASSOC_INFO 287 /* for Dongle EXT_STA support */ -#define WLC_GET_OID_PHY 288 /* for Dongle EXT_STA support */ -#define WLC_SET_OID_PHY 289 /* for Dongle EXT_STA support */ -#define WLC_SET_ASSOC_TIME 290 /* for Dongle EXT_STA support */ -#define WLC_GET_DESIRED_SSID 291 /* for Dongle EXT_STA support */ -#define WLC_GET_CHANSPEC 292 /* for Dongle EXT_STA support */ -#define WLC_GET_ASSOC_STATE 293 /* for Dongle EXT_STA support */ -#define WLC_SET_PHY_STATE 294 /* for Dongle EXT_STA support */ -#define WLC_GET_SCAN_PENDING 295 /* for Dongle EXT_STA support */ -#define WLC_GET_SCANREQ_PENDING 296 /* for Dongle EXT_STA support */ -#define WLC_GET_PREV_ROAM_REASON 297 /* for Dongle EXT_STA support */ -#define WLC_SET_PREV_ROAM_REASON 298 /* for Dongle EXT_STA support */ -#define WLC_GET_BANDSTATES_PI 299 /* for Dongle EXT_STA support */ -#define WLC_GET_PHY_STATE 300 /* for Dongle EXT_STA support */ -#define WLC_GET_BSS_WPA_RSN 301 /* for Dongle EXT_STA support */ -#define WLC_GET_BSS_WPA2_RSN 302 /* for Dongle EXT_STA support */ -#define WLC_GET_BSS_BCN_TS 303 /* for Dongle EXT_STA support */ -#define WLC_GET_INT_DISASSOC 304 /* for Dongle EXT_STA support */ -#define WLC_SET_NUM_PEERS 305 /* for Dongle EXT_STA support */ -#define WLC_GET_NUM_BSS 306 /* for Dongle EXT_STA support */ -#define WLC_PHY_SAMPLE_COLLECT 307 /* phy sample collect mode */ -/* #define WLC_UM_PRIV 308 */ /* Deprecated: usermode driver */ -#define WLC_GET_CMD 309 -/* #define WLC_LAST 310 */ /* Never used - can be reused */ -#define WLC_SET_INTERFERENCE_OVERRIDE_MODE 311 /* set inter mode override */ -#define WLC_GET_INTERFERENCE_OVERRIDE_MODE 312 /* get inter mode override */ -/* #define WLC_GET_WAI_RESTRICT 313 */ /* for WAPI, deprecated use iovar instead */ -/* #define WLC_SET_WAI_RESTRICT 314 */ /* for WAPI, deprecated use iovar instead */ -/* #define WLC_SET_WAI_REKEY 315 */ /* for WAPI, deprecated use iovar instead */ -#define WLC_SET_NAT_CONFIG 316 /* for configuring NAT filter driver */ -#define WLC_GET_NAT_STATE 317 -#define WLC_GET_TXBF_RATESET 318 -#define WLC_SET_TXBF_RATESET 319 -#define WLC_SCAN_CQ 320 -#define WLC_GET_RSSI_QDB 321 /* qdB portion of the RSSI */ - -#define WLC_LAST 322 -#ifndef EPICTRL_COOKIE -#define EPICTRL_COOKIE 0xABADCEDE -#endif - -/* vx wlc ioctl's offset */ -#define CMN_IOCTL_OFF 0x180 - -/* - * custom OID support - * - * 0xFF - implementation specific OID - * 0xE4 - first byte of Broadcom PCI vendor ID - * 0x14 - second byte of Broadcom PCI vendor ID - * 0xXX - the custom OID number - */ - -/* begin 0x1f values beyond the start of the ET driver range. */ -#define WL_OID_BASE 0xFFE41420 - -/* NDIS overrides */ -#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE) -#define OID_WL_GET_FORCELINK (WL_OID_BASE + WLC_GET_FORCELINK) -#define OID_WL_SET_FORCELINK (WL_OID_BASE + WLC_SET_FORCELINK) -#define OID_WL_ENCRYPT_STRENGTH (WL_OID_BASE + WLC_ENCRYPT_STRENGTH) -#define OID_WL_DECRYPT_STATUS (WL_OID_BASE + WLC_DECRYPT_STATUS) -#define OID_LEGACY_LINK_BEHAVIOR (WL_OID_BASE + WLC_LEGACY_LINK_BEHAVIOR) -#define OID_WL_NDCONFIG_ITEM (WL_OID_BASE + WLC_NDCONFIG_ITEM) - -/* EXT_STA Dongle suuport */ -#define OID_STA_CHANSPEC (WL_OID_BASE + WLC_GET_CHANSPEC) -#define OID_STA_NBANDS (WL_OID_BASE + WLC_GET_NBANDS) -#define OID_STA_GET_PHY (WL_OID_BASE + WLC_GET_OID_PHY) -#define OID_STA_SET_PHY (WL_OID_BASE + WLC_SET_OID_PHY) -#define OID_STA_ASSOC_TIME (WL_OID_BASE + WLC_SET_ASSOC_TIME) -#define OID_STA_DESIRED_SSID (WL_OID_BASE + WLC_GET_DESIRED_SSID) -#define OID_STA_SET_PHY_STATE (WL_OID_BASE + WLC_SET_PHY_STATE) -#define OID_STA_SCAN_PENDING (WL_OID_BASE + WLC_GET_SCAN_PENDING) -#define OID_STA_SCANREQ_PENDING (WL_OID_BASE + WLC_GET_SCANREQ_PENDING) -#define OID_STA_GET_ROAM_REASON (WL_OID_BASE + WLC_GET_PREV_ROAM_REASON) -#define OID_STA_SET_ROAM_REASON (WL_OID_BASE + WLC_SET_PREV_ROAM_REASON) -#define OID_STA_GET_PHY_STATE (WL_OID_BASE + WLC_GET_PHY_STATE) -#define OID_STA_INT_DISASSOC (WL_OID_BASE + WLC_GET_INT_DISASSOC) -#define OID_STA_SET_NUM_PEERS (WL_OID_BASE + WLC_SET_NUM_PEERS) -#define OID_STA_GET_NUM_BSS (WL_OID_BASE + WLC_GET_NUM_BSS) - -/* NAT filter driver support */ -#define OID_NAT_SET_CONFIG (WL_OID_BASE + WLC_SET_NAT_CONFIG) -#define OID_NAT_GET_STATE (WL_OID_BASE + WLC_GET_NAT_STATE) - -#define WL_DECRYPT_STATUS_SUCCESS 1 -#define WL_DECRYPT_STATUS_FAILURE 2 -#define WL_DECRYPT_STATUS_UNKNOWN 3 - -/* allows user-mode app to poll the status of USB image upgrade */ -#define WLC_UPGRADE_SUCCESS 0 -#define WLC_UPGRADE_PENDING 1 - -/* WLC_GET_AUTH, WLC_SET_AUTH values */ -#define WL_AUTH_OPEN_SYSTEM 0 /* d11 open authentication */ -#define WL_AUTH_SHARED_KEY 1 /* d11 shared authentication */ -#define WL_AUTH_OPEN_SHARED 2 /* try open, then shared if open failed w/rc 13 */ - -/* a large TX Power as an init value to factor out of MIN() calculations, - * keep low enough to fit in an int8, units are .25 dBm - */ -#define WLC_TXPWR_MAX (127) /* ~32 dBm = 1,500 mW */ - -/* "diag" iovar argument and error code */ -#define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */ -#define WL_DIAG_LOOPBACK 2 /* d11 loopback data test */ -#define WL_DIAG_MEMORY 3 /* d11 memory test */ -#define WL_DIAG_LED 4 /* LED test */ -#define WL_DIAG_REG 5 /* d11/phy register test */ -#define WL_DIAG_SROM 6 /* srom read/crc test */ -#define WL_DIAG_DMA 7 /* DMA test */ -#define WL_DIAG_LOOPBACK_EXT 8 /* enhenced d11 loopback data test */ - -#define WL_DIAGERR_SUCCESS 0 -#define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */ -#define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */ -#define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */ -#define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */ -#define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */ -#define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */ -#define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */ -#define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */ -#define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */ -#define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */ - -#define WL_DIAGERR_MEMORY_TIMEOUT 11 /* d11 memory test didn't finish in time */ -#define WL_DIAGERR_MEMORY_BADPATTERN 12 /* d11 memory test result in bad pattern */ - -/* band types */ -#define WLC_BAND_AUTO 0 /* auto-select */ -#define WLC_BAND_5G 1 /* 5 Ghz */ -#define WLC_BAND_2G 2 /* 2.4 Ghz */ -#define WLC_BAND_ALL 3 /* all bands */ - -/* band range returned by band_range iovar */ -#define WL_CHAN_FREQ_RANGE_2G 0 -#define WL_CHAN_FREQ_RANGE_5GL 1 -#define WL_CHAN_FREQ_RANGE_5GM 2 -#define WL_CHAN_FREQ_RANGE_5GH 3 - -#define WL_CHAN_FREQ_RANGE_5GLL_5BAND 4 -#define WL_CHAN_FREQ_RANGE_5GLH_5BAND 5 -#define WL_CHAN_FREQ_RANGE_5GML_5BAND 6 -#define WL_CHAN_FREQ_RANGE_5GMH_5BAND 7 -#define WL_CHAN_FREQ_RANGE_5GH_5BAND 8 - -#define WL_CHAN_FREQ_RANGE_5G_BAND0 1 -#define WL_CHAN_FREQ_RANGE_5G_BAND1 2 -#define WL_CHAN_FREQ_RANGE_5G_BAND2 3 -#define WL_CHAN_FREQ_RANGE_5G_BAND3 4 - -#define WL_CHAN_FREQ_RANGE_5G_4BAND 5 - -/* MAC list modes */ -#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ -#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ -#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ - -/* - * 54g modes (basic bits may still be overridden) - * - * GMODE_LEGACY_B Rateset: 1b, 2b, 5.5, 11 - * Preamble: Long - * Shortslot: Off - * GMODE_AUTO Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 - * Extended Rateset: 6, 9, 12, 48 - * Preamble: Long - * Shortslot: Auto - * GMODE_ONLY Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 - * Extended Rateset: 6b, 9, 12b, 48 - * Preamble: Short required - * Shortslot: Auto - * GMODE_B_DEFERRED Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 - * Extended Rateset: 6, 9, 12, 48 - * Preamble: Long - * Shortslot: On - * GMODE_PERFORMANCE Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 - * Preamble: Short required - * Shortslot: On and required - * GMODE_LRS Rateset: 1b, 2b, 5.5b, 11b - * Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 - * Preamble: Long - * Shortslot: Auto - */ -#define GMODE_LEGACY_B 0 -#define GMODE_AUTO 1 -#define GMODE_ONLY 2 -#define GMODE_B_DEFERRED 3 -#define GMODE_PERFORMANCE 4 -#define GMODE_LRS 5 -#define GMODE_MAX 6 - -/* values for PLCPHdr_override */ -#define WLC_PLCP_AUTO -1 -#define WLC_PLCP_SHORT 0 -#define WLC_PLCP_LONG 1 - -/* values for g_protection_override and n_protection_override */ -#define WLC_PROTECTION_AUTO -1 -#define WLC_PROTECTION_OFF 0 -#define WLC_PROTECTION_ON 1 -#define WLC_PROTECTION_MMHDR_ONLY 2 -#define WLC_PROTECTION_CTS_ONLY 3 - -/* values for g_protection_control and n_protection_control */ -#define WLC_PROTECTION_CTL_OFF 0 -#define WLC_PROTECTION_CTL_LOCAL 1 -#define WLC_PROTECTION_CTL_OVERLAP 2 - -/* values for n_protection */ -#define WLC_N_PROTECTION_OFF 0 -#define WLC_N_PROTECTION_OPTIONAL 1 -#define WLC_N_PROTECTION_20IN40 2 -#define WLC_N_PROTECTION_MIXEDMODE 3 - -/* values for n_preamble_type */ -#define WLC_N_PREAMBLE_MIXEDMODE 0 -#define WLC_N_PREAMBLE_GF 1 -#define WLC_N_PREAMBLE_GF_BRCM 2 - -/* values for band specific 40MHz capabilities (deprecated) */ -#define WLC_N_BW_20ALL 0 -#define WLC_N_BW_40ALL 1 -#define WLC_N_BW_20IN2G_40IN5G 2 - -#define WLC_BW_20MHZ_BIT (1<<0) -#define WLC_BW_40MHZ_BIT (1<<1) -#define WLC_BW_80MHZ_BIT (1<<2) -#define WLC_BW_160MHZ_BIT (1<<3) - -/* Bandwidth capabilities */ -#define WLC_BW_CAP_20MHZ (WLC_BW_20MHZ_BIT) -#define WLC_BW_CAP_40MHZ (WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT) -#define WLC_BW_CAP_80MHZ (WLC_BW_80MHZ_BIT|WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT) -#define WLC_BW_CAP_160MHZ (WLC_BW_160MHZ_BIT|WLC_BW_80MHZ_BIT| \ - WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT) -#define WLC_BW_CAP_UNRESTRICTED 0xFF - -#define WL_BW_CAP_20MHZ(bw_cap) (((bw_cap) & WLC_BW_20MHZ_BIT) ? TRUE : FALSE) -#define WL_BW_CAP_40MHZ(bw_cap) (((bw_cap) & WLC_BW_40MHZ_BIT) ? TRUE : FALSE) -#define WL_BW_CAP_80MHZ(bw_cap) (((bw_cap) & WLC_BW_80MHZ_BIT) ? TRUE : FALSE) -#define WL_BW_CAP_160MHZ(bw_cap)(((bw_cap) & WLC_BW_160MHZ_BIT) ? TRUE : FALSE) - -/* values to force tx/rx chain */ -#define WLC_N_TXRX_CHAIN0 0 -#define WLC_N_TXRX_CHAIN1 1 - -/* bitflags for SGI support (sgi_rx iovar) */ -#define WLC_N_SGI_20 0x01 -#define WLC_N_SGI_40 0x02 -#define WLC_VHT_SGI_80 0x04 - -/* when sgi_tx==WLC_SGI_ALL, bypass rate selection, enable sgi for all mcs */ -#define WLC_SGI_ALL 0x02 - -#define LISTEN_INTERVAL 10 -/* interference mitigation options */ -#define INTERFERE_OVRRIDE_OFF -1 /* interference override off */ -#define INTERFERE_NONE 0 /* off */ -#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */ -#define WLAN_MANUAL 2 /* ACI: no auto detection */ -#define WLAN_AUTO 3 /* ACI: auto detect */ -#define WLAN_AUTO_W_NOISE 4 /* ACI: auto - detect and non 802.11 interference */ -#define AUTO_ACTIVE (1 << 7) /* Auto is currently active */ - -/* interfernece mode bit-masks (ACPHY) */ -#define ACPHY_ACI_GLITCHBASED_DESENSE 1 /* bit 0 */ -#define ACPHY_ACI_HWACI_PKTGAINLMT 2 /* bit 1 */ -#define ACPHY_ACI_W2NB_PKTGAINLMT 4 /* bit 2 */ -#define ACPHY_ACI_PREEMPTION 8 /* bit 3 */ -#define ACPHY_ACI_MAX_MODE 15 - -/* AP environment */ -#define AP_ENV_DETECT_NOT_USED 0 /* We aren't using AP environment detection */ -#define AP_ENV_DENSE 1 /* "Corporate" or other AP dense environment */ -#define AP_ENV_SPARSE 2 /* "Home" or other sparse environment */ -#define AP_ENV_INDETERMINATE 3 /* AP environment hasn't been identified */ - -#define TRIGGER_NOW 0 -#define TRIGGER_CRS 0x01 -#define TRIGGER_CRSDEASSERT 0x02 -#define TRIGGER_GOODFCS 0x04 -#define TRIGGER_BADFCS 0x08 -#define TRIGGER_BADPLCP 0x10 -#define TRIGGER_CRSGLITCH 0x20 - -#define WL_SAMPLEDATA_HEADER_TYPE 1 -#define WL_SAMPLEDATA_HEADER_SIZE 80 /* sample collect header size (bytes) */ -#define WL_SAMPLEDATA_TYPE 2 -#define WL_SAMPLEDATA_SEQ 0xff /* sequence # */ -#define WL_SAMPLEDATA_MORE_DATA 0x100 /* more data mask */ - -/* WL_OTA START */ -#define WL_OTA_ARG_PARSE_BLK_SIZE 1200 -#define WL_OTA_TEST_MAX_NUM_RATE 30 -#define WL_OTA_TEST_MAX_NUM_SEQ 100 - -#define WL_THRESHOLD_LO_BAND 70 /* range from 5250MHz - 5350MHz */ - -/* radar iovar SET defines */ -#define WL_RADAR_DETECTOR_OFF 0 /* radar detector off */ -#define WL_RADAR_DETECTOR_ON 1 /* radar detector on */ -#define WL_RADAR_SIMULATED 2 /* force radar detector to declare - * detection once - */ -#define WL_RSSI_ANT_VERSION 1 /* current version of wl_rssi_ant_t */ -#define WL_ANT_RX_MAX 2 /* max 2 receive antennas */ -#define WL_ANT_HT_RX_MAX 3 /* max 3 receive antennas/cores */ -#define WL_ANT_IDX_1 0 /* antenna index 1 */ -#define WL_ANT_IDX_2 1 /* antenna index 2 */ - -#ifndef WL_RSSI_ANT_MAX -#define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */ -#elif WL_RSSI_ANT_MAX != 4 -#error "WL_RSSI_ANT_MAX does not match" -#endif - -/* dfs_status iovar-related defines */ - -/* cac - channel availability check, - * ism - in-service monitoring - * csa - channel switching announcement - */ - -/* cac state values */ -#define WL_DFS_CACSTATE_IDLE 0 /* state for operating in non-radar channel */ -#define WL_DFS_CACSTATE_PREISM_CAC 1 /* CAC in progress */ -#define WL_DFS_CACSTATE_ISM 2 /* ISM in progress */ -#define WL_DFS_CACSTATE_CSA 3 /* csa */ -#define WL_DFS_CACSTATE_POSTISM_CAC 4 /* ISM CAC */ -#define WL_DFS_CACSTATE_PREISM_OOC 5 /* PREISM OOC */ -#define WL_DFS_CACSTATE_POSTISM_OOC 6 /* POSTISM OOC */ -#define WL_DFS_CACSTATES 7 /* this many states exist */ - -/* Defines used with channel_bandwidth for curpower */ -#define WL_BW_20MHZ 0 -#define WL_BW_40MHZ 1 -#define WL_BW_80MHZ 2 -#define WL_BW_160MHZ 3 - -/* tx_power_t.flags bits */ -#define WL_TX_POWER_F_ENABLED 1 -#define WL_TX_POWER_F_HW 2 -#define WL_TX_POWER_F_MIMO 4 -#define WL_TX_POWER_F_SISO 8 -#define WL_TX_POWER_F_HT 0x10 -#define WL_TX_POWER_F_VHT 0x20 -#define WL_TX_POWER_F_OPENLOOP 0x40 - -/* Message levels */ -#define WL_ERROR_VAL 0x00000001 -#define WL_TRACE_VAL 0x00000002 -#define WL_PRHDRS_VAL 0x00000004 -#define WL_PRPKT_VAL 0x00000008 -#define WL_INFORM_VAL 0x00000010 -#define WL_TMP_VAL 0x00000020 -#define WL_OID_VAL 0x00000040 -#define WL_RATE_VAL 0x00000080 -#define WL_ASSOC_VAL 0x00000100 -#define WL_PRUSR_VAL 0x00000200 -#define WL_PS_VAL 0x00000400 -#define WL_TXPWR_VAL 0x00000800 /* retired in TOT on 6/10/2009 */ -#define WL_PORT_VAL 0x00001000 -#define WL_DUAL_VAL 0x00002000 -#define WL_WSEC_VAL 0x00004000 -#define WL_WSEC_DUMP_VAL 0x00008000 -#define WL_LOG_VAL 0x00010000 -#define WL_NRSSI_VAL 0x00020000 /* retired in TOT on 6/10/2009 */ -#define WL_LOFT_VAL 0x00040000 /* retired in TOT on 6/10/2009 */ -#define WL_REGULATORY_VAL 0x00080000 -#define WL_PHYCAL_VAL 0x00100000 /* retired in TOT on 6/10/2009 */ -#define WL_RADAR_VAL 0x00200000 /* retired in TOT on 6/10/2009 */ -#define WL_MPC_VAL 0x00400000 -#define WL_APSTA_VAL 0x00800000 -#define WL_DFS_VAL 0x01000000 -#define WL_BA_VAL 0x02000000 /* retired in TOT on 6/14/2010 */ -#define WL_ACI_VAL 0x04000000 -#define WL_MBSS_VAL 0x04000000 -#define WL_CAC_VAL 0x08000000 -#define WL_AMSDU_VAL 0x10000000 -#define WL_AMPDU_VAL 0x20000000 -#define WL_FFPLD_VAL 0x40000000 - -/* wl_msg_level is full. For new bits take the next one and AND with - * wl_msg_level2 in wl_dbg.h - */ -#define WL_DPT_VAL 0x00000001 -#define WL_SCAN_VAL 0x00000002 -#define WL_WOWL_VAL 0x00000004 -#define WL_COEX_VAL 0x00000008 -#define WL_RTDC_VAL 0x00000010 -#define WL_PROTO_VAL 0x00000020 -#define WL_BTA_VAL 0x00000040 -#define WL_CHANINT_VAL 0x00000080 -#define WL_WMF_VAL 0x00000100 -#define WL_P2P_VAL 0x00000200 -#define WL_ITFR_VAL 0x00000400 -#define WL_MCHAN_VAL 0x00000800 -#define WL_TDLS_VAL 0x00001000 -#define WL_MCNX_VAL 0x00002000 -#define WL_PROT_VAL 0x00004000 -#define WL_PSTA_VAL 0x00008000 -#define WL_TSO_VAL 0x00010000 -#define WL_TRF_MGMT_VAL 0x00020000 -#define WL_LPC_VAL 0x00040000 -#define WL_L2FILTER_VAL 0x00080000 -#define WL_TXBF_VAL 0x00100000 -#define WL_P2PO_VAL 0x00200000 -#define WL_TBTT_VAL 0x00400000 -#define WL_NIC_VAL 0x00800000 -#define WL_MQ_VAL 0x01000000 - -/* This level is currently used in Phoenix2 only */ -#define WL_SRSCAN_VAL 0x02000000 - -#define WL_WNM_VAL 0x04000000 -#define WL_AWDL_VAL 0x08000000 -#define WL_PWRSEL_VAL 0x10000000 -#define WL_NET_DETECT_VAL 0x20000000 -#define WL_PCIE_VAL 0x40000000 - -/* use top-bit for WL_TIME_STAMP_VAL because this is a modifier - * rather than a message-type of its own - */ -#define WL_TIMESTAMP_VAL 0x80000000 - -/* max # of leds supported by GPIO (gpio pin# == led index#) */ -#define WL_LED_NUMGPIO 32 /* gpio 0-31 */ - -/* led per-pin behaviors */ -#define WL_LED_OFF 0 /* always off */ -#define WL_LED_ON 1 /* always on */ -#define WL_LED_ACTIVITY 2 /* activity */ -#define WL_LED_RADIO 3 /* radio enabled */ -#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */ -#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */ -#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */ -#define WL_LED_WI1 7 -#define WL_LED_WI2 8 -#define WL_LED_WI3 9 -#define WL_LED_ASSOC 10 /* associated state indicator */ -#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */ -#define WL_LED_ASSOCACT 12 /* on when associated; blink fast for activity */ -#define WL_LED_WI4 13 -#define WL_LED_WI5 14 -#define WL_LED_BLINKSLOW 15 /* blink slow */ -#define WL_LED_BLINKMED 16 /* blink med */ -#define WL_LED_BLINKFAST 17 /* blink fast */ -#define WL_LED_BLINKCUSTOM 18 /* blink custom */ -#define WL_LED_BLINKPERIODIC 19 /* blink periodic (custom 1000ms / off 400ms) */ -#define WL_LED_ASSOC_WITH_SEC 20 /* when connected with security */ - /* keep on for 300 sec */ -#define WL_LED_START_OFF 21 /* off upon boot, could be turned on later */ -#define WL_LED_WI6 22 -#define WL_LED_WI7 23 -#define WL_LED_WI8 24 -#define WL_LED_NUMBEHAVIOR 25 - -/* led behavior numeric value format */ -#define WL_LED_BEH_MASK 0x7f /* behavior mask */ -#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */ - -/* number of bytes needed to define a proper bit mask for MAC event reporting */ -#define BCMIO_ROUNDUP(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) -#define BCMIO_NBBY 8 -#define WL_EVENTING_MASK_LEN 16 - - -/* join preference types */ -#define WL_JOIN_PREF_RSSI 1 /* by RSSI */ -#define WL_JOIN_PREF_WPA 2 /* by akm and ciphers */ -#define WL_JOIN_PREF_BAND 3 /* by 802.11 band */ -#define WL_JOIN_PREF_RSSI_DELTA 4 /* by 802.11 band only if RSSI delta condition matches */ -#define WL_JOIN_PREF_TRANS_PREF 5 /* defined by requesting AP */ - -/* band preference */ -#define WLJP_BAND_ASSOC_PREF 255 /* use what WLC_SET_ASSOC_PREFER ioctl specifies */ - -/* any multicast cipher suite */ -#define WL_WPA_ACP_MCS_ANY "\x00\x00\x00\x00" - -/* 802.11h measurement types */ -#define WLC_MEASURE_TPC 1 -#define WLC_MEASURE_CHANNEL_BASIC 2 -#define WLC_MEASURE_CHANNEL_CCA 3 -#define WLC_MEASURE_CHANNEL_RPI 4 - -/* regulatory enforcement levels */ -#define SPECT_MNGMT_OFF 0 /* both 11h and 11d disabled */ -#define SPECT_MNGMT_LOOSE_11H 1 /* allow non-11h APs in scan lists */ -#define SPECT_MNGMT_STRICT_11H 2 /* prune out non-11h APs from scan list */ -#define SPECT_MNGMT_STRICT_11D 3 /* switch to 802.11D mode */ -/* SPECT_MNGMT_LOOSE_11H_D - same as SPECT_MNGMT_LOOSE with the exception that Country IE - * adoption is done regardless of capability spectrum_management - */ -#define SPECT_MNGMT_LOOSE_11H_D 4 /* operation defined above */ - -#define WL_CHAN_VALID_HW (1 << 0) /* valid with current HW */ -#define WL_CHAN_VALID_SW (1 << 1) /* valid with current country setting */ -#define WL_CHAN_BAND_5G (1 << 2) /* 5GHz-band channel */ -#define WL_CHAN_RADAR (1 << 3) /* radar sensitive channel */ -#define WL_CHAN_INACTIVE (1 << 4) /* temporarily inactive due to radar */ -#define WL_CHAN_PASSIVE (1 << 5) /* channel is in passive mode */ -#define WL_CHAN_RESTRICTED (1 << 6) /* restricted use channel */ - -/* BTC mode used by "btc_mode" iovar */ -#define WL_BTC_DISABLE 0 /* disable BT coexistence */ -#define WL_BTC_FULLTDM 1 /* full TDM COEX */ -#define WL_BTC_ENABLE 1 /* full TDM COEX to maintain backward compatiblity */ -#define WL_BTC_PREMPT 2 /* full TDM COEX with preemption */ -#define WL_BTC_LITE 3 /* light weight coex for large isolation platform */ -#define WL_BTC_PARALLEL 4 /* BT and WLAN run in parallel with separate antenna */ -#define WL_BTC_HYBRID 5 /* hybrid coex, only ack is allowed to transmit in BT slot */ -#define WL_BTC_DEFAULT 8 /* set the default mode for the device */ -#define WL_INF_BTC_DISABLE 0 -#define WL_INF_BTC_ENABLE 1 -#define WL_INF_BTC_AUTO 3 - -/* BTC wire used by "btc_wire" iovar */ -#define WL_BTC_DEFWIRE 0 /* use default wire setting */ -#define WL_BTC_2WIRE 2 /* use 2-wire BTC */ -#define WL_BTC_3WIRE 3 /* use 3-wire BTC */ -#define WL_BTC_4WIRE 4 /* use 4-wire BTC */ - -/* BTC flags: BTC configuration that can be set by host */ -#define WL_BTC_FLAG_PREMPT (1 << 0) -#define WL_BTC_FLAG_BT_DEF (1 << 1) -#define WL_BTC_FLAG_ACTIVE_PROT (1 << 2) -#define WL_BTC_FLAG_SIM_RSP (1 << 3) -#define WL_BTC_FLAG_PS_PROTECT (1 << 4) -#define WL_BTC_FLAG_SIM_TX_LP (1 << 5) -#define WL_BTC_FLAG_ECI (1 << 6) -#define WL_BTC_FLAG_LIGHT (1 << 7) -#define WL_BTC_FLAG_PARALLEL (1 << 8) - -/* maximum channels returned by the get valid channels iovar */ -#define WL_NUMCHANNELS 64 - -/* max number of chanspecs (used by the iovar to calc. buf space) */ -#define WL_NUMCHANSPECS 110 - -/* WDS link local endpoint WPA role */ -#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */ -#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */ -#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */ - -/* Base offset values */ -#define WL_PKT_FILTER_BASE_PKT 0 -#define WL_PKT_FILTER_BASE_END 1 -#define WL_PKT_FILTER_BASE_D11_H 2 /* May be removed */ -#define WL_PKT_FILTER_BASE_D11_D 3 /* May be removed */ -#define WL_PKT_FILTER_BASE_ETH_H 4 -#define WL_PKT_FILTER_BASE_ETH_D 5 -#define WL_PKT_FILTER_BASE_ARP_H 6 -#define WL_PKT_FILTER_BASE_ARP_D 7 /* May be removed */ -#define WL_PKT_FILTER_BASE_IP4_H 8 -#define WL_PKT_FILTER_BASE_IP4_D 9 -#define WL_PKT_FILTER_BASE_IP6_H 10 -#define WL_PKT_FILTER_BASE_IP6_D 11 -#define WL_PKT_FILTER_BASE_TCP_H 12 -#define WL_PKT_FILTER_BASE_TCP_D 13 /* May be removed */ -#define WL_PKT_FILTER_BASE_UDP_H 14 -#define WL_PKT_FILTER_BASE_UDP_D 15 -#define WL_PKT_FILTER_BASE_IP6_P 16 -#define WL_PKT_FILTER_BASE_COUNT 17 /* May be removed */ - -/* String mapping for bases that may be used by applications or debug */ -#define WL_PKT_FILTER_BASE_NAMES \ - { "START", WL_PKT_FILTER_BASE_PKT }, \ - { "END", WL_PKT_FILTER_BASE_END }, \ - { "ETH_H", WL_PKT_FILTER_BASE_ETH_H }, \ - { "ETH_D", WL_PKT_FILTER_BASE_ETH_D }, \ - { "D11_H", WL_PKT_FILTER_BASE_D11_H }, \ - { "D11_D", WL_PKT_FILTER_BASE_D11_D }, \ - { "ARP_H", WL_PKT_FILTER_BASE_ARP_H }, \ - { "IP4_H", WL_PKT_FILTER_BASE_IP4_H }, \ - { "IP4_D", WL_PKT_FILTER_BASE_IP4_D }, \ - { "IP6_H", WL_PKT_FILTER_BASE_IP6_H }, \ - { "IP6_D", WL_PKT_FILTER_BASE_IP6_D }, \ - { "IP6_P", WL_PKT_FILTER_BASE_IP6_P }, \ - { "TCP_H", WL_PKT_FILTER_BASE_TCP_H }, \ - { "TCP_D", WL_PKT_FILTER_BASE_TCP_D }, \ - { "UDP_H", WL_PKT_FILTER_BASE_UDP_H }, \ - { "UDP_D", WL_PKT_FILTER_BASE_UDP_D } - -/* Flags for a pattern list element */ -#define WL_PKT_FILTER_MFLAG_NEG 0x0001 - -/* - * Packet engine interface - */ - -#define WL_PKTENG_PER_TX_START 0x01 -#define WL_PKTENG_PER_TX_STOP 0x02 -#define WL_PKTENG_PER_RX_START 0x04 -#define WL_PKTENG_PER_RX_WITH_ACK_START 0x05 -#define WL_PKTENG_PER_TX_WITH_ACK_START 0x06 -#define WL_PKTENG_PER_RX_STOP 0x08 -#define WL_PKTENG_PER_MASK 0xff - -#define WL_PKTENG_SYNCHRONOUS 0x100 /* synchronous flag */ - -#define WL_PKTENG_MAXPKTSZ 16384 /* max pktsz limit for pkteng */ - -#define NUM_80211b_RATES 4 -#define NUM_80211ag_RATES 8 -#define NUM_80211n_RATES 32 -#define NUM_80211_RATES (NUM_80211b_RATES+NUM_80211ag_RATES+NUM_80211n_RATES) - -/* - * WOWL capability/override settings - */ -#define WL_WOWL_MAGIC (1 << 0) /* Wakeup on Magic packet */ -#define WL_WOWL_NET (1 << 1) /* Wakeup on Netpattern */ -#define WL_WOWL_DIS (1 << 2) /* Wakeup on loss-of-link due to Disassoc/Deauth */ -#define WL_WOWL_RETR (1 << 3) /* Wakeup on retrograde TSF */ -#define WL_WOWL_BCN (1 << 4) /* Wakeup on loss of beacon */ -#define WL_WOWL_TST (1 << 5) /* Wakeup after test */ -#define WL_WOWL_M1 (1 << 6) /* Wakeup after PTK refresh */ -#define WL_WOWL_EAPID (1 << 7) /* Wakeup after receipt of EAP-Identity Req */ -#define WL_WOWL_PME_GPIO (1 << 8) /* Wakeind via PME(0) or GPIO(1) */ -#define WL_WOWL_NEEDTKIP1 (1 << 9) /* need tkip phase 1 key to be updated by the driver */ -#define WL_WOWL_GTK_FAILURE (1 << 10) /* enable wakeup if GTK fails */ -#define WL_WOWL_EXTMAGPAT (1 << 11) /* support extended magic packets */ -#define WL_WOWL_ARPOFFLOAD (1 << 12) /* support ARP/NS/keepalive offloading */ -#define WL_WOWL_WPA2 (1 << 13) /* read protocol version for EAPOL frames */ -#define WL_WOWL_KEYROT (1 << 14) /* If the bit is set, use key rotaton */ -#define WL_WOWL_BCAST (1 << 15) /* If the bit is set, frm received was bcast frame */ -#define WL_WOWL_SCANOL (1 << 16) /* If the bit is set, scan offload is enabled */ -#define WL_WOWL_TCPKEEP_TIME (1 << 17) /* Wakeup on tcpkeep alive timeout */ -#define WL_WOWL_MDNS_CONFLICT (1 << 18) /* Wakeup on mDNS Conflict Resolution */ -#define WL_WOWL_MDNS_SERVICE (1 << 19) /* Wakeup on mDNS Service Connect */ -#define WL_WOWL_TCPKEEP_DATA (1 << 20) /* tcp keepalive got data */ -#define WL_WOWL_FW_HALT (1 << 21) /* Firmware died in wowl mode */ -#define WL_WOWL_ENAB_HWRADIO (1 << 22) /* Enable detection of radio button changes */ -#define WL_WOWL_MIC_FAIL (1 << 23) /* Offloads detected MIC failure(s) */ -#define WL_WOWL_LINKDOWN (1 << 31) /* Link Down indication in WoWL mode */ - -#define WL_WOWL_TCPKEEP (1 << 20) /* temp copy to satisfy automerger */ -#define MAGIC_PKT_MINLEN 102 /* Magic pkt min length is 6 * 0xFF + 16 * ETHER_ADDR_LEN */ - -#define WOWL_PATTEN_TYPE_ARP (1 << 0) /* ARP offload Pattern */ -#define WOWL_PATTEN_TYPE_NA (1 << 1) /* NA offload Pattern */ - -#define MAGIC_PKT_MINLEN 102 /* Magic pkt min length is 6 * 0xFF + 16 * ETHER_ADDR_LEN */ -#define MAGIC_PKT_NUM_MAC_ADDRS 16 - - -/* Overlap BSS Scan parameters default, minimum, maximum */ -#define WLC_OBSS_SCAN_PASSIVE_DWELL_DEFAULT 20 /* unit TU */ -#define WLC_OBSS_SCAN_PASSIVE_DWELL_MIN 5 /* unit TU */ -#define WLC_OBSS_SCAN_PASSIVE_DWELL_MAX 1000 /* unit TU */ -#define WLC_OBSS_SCAN_ACTIVE_DWELL_DEFAULT 10 /* unit TU */ -#define WLC_OBSS_SCAN_ACTIVE_DWELL_MIN 10 /* unit TU */ -#define WLC_OBSS_SCAN_ACTIVE_DWELL_MAX 1000 /* unit TU */ -#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_DEFAULT 300 /* unit Sec */ -#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_MIN 10 /* unit Sec */ -#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_MAX 900 /* unit Sec */ -#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_DEFAULT 5 -#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_MIN 5 -#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_MAX 100 -#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_DEFAULT 200 /* unit TU */ -#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_MIN 200 /* unit TU */ -#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_MAX 10000 /* unit TU */ -#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_DEFAULT 20 /* unit TU */ -#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_MIN 20 /* unit TU */ -#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_MAX 10000 /* unit TU */ -#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_DEFAULT 25 /* unit percent */ -#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_MIN 0 /* unit percent */ -#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_MAX 100 /* unit percent */ - -#define WL_MIN_NUM_OBSS_SCAN_ARG 7 /* minimum number of arguments required for OBSS Scan */ - -#define WL_COEX_INFO_MASK 0x07 -#define WL_COEX_INFO_REQ 0x01 -#define WL_COEX_40MHZ_INTOLERANT 0x02 -#define WL_COEX_WIDTH20 0x04 - -#define WLC_RSSI_INVALID 0 /* invalid RSSI value */ - -#define MAX_RSSI_LEVELS 8 - -/* **** EXTLOG **** */ -#define EXTLOG_CUR_VER 0x0100 - -#define MAX_ARGSTR_LEN 18 /* At least big enough for storing ETHER_ADDR_STR_LEN */ - -/* log modules (bitmap) */ -#define LOG_MODULE_COMMON 0x0001 -#define LOG_MODULE_ASSOC 0x0002 -#define LOG_MODULE_EVENT 0x0004 -#define LOG_MODULE_MAX 3 /* Update when adding module */ - -/* log levels */ -#define WL_LOG_LEVEL_DISABLE 0 -#define WL_LOG_LEVEL_ERR 1 -#define WL_LOG_LEVEL_WARN 2 -#define WL_LOG_LEVEL_INFO 3 -#define WL_LOG_LEVEL_MAX WL_LOG_LEVEL_INFO /* Update when adding level */ - -/* flag */ -#define LOG_FLAG_EVENT 1 - -/* log arg_type */ -#define LOG_ARGTYPE_NULL 0 -#define LOG_ARGTYPE_STR 1 /* %s */ -#define LOG_ARGTYPE_INT 2 /* %d */ -#define LOG_ARGTYPE_INT_STR 3 /* %d...%s */ -#define LOG_ARGTYPE_STR_INT 4 /* %s...%d */ - -/* 802.11 Mgmt Packet flags */ -#define VNDR_IE_BEACON_FLAG 0x1 -#define VNDR_IE_PRBRSP_FLAG 0x2 -#define VNDR_IE_ASSOCRSP_FLAG 0x4 -#define VNDR_IE_AUTHRSP_FLAG 0x8 -#define VNDR_IE_PRBREQ_FLAG 0x10 -#define VNDR_IE_ASSOCREQ_FLAG 0x20 -#define VNDR_IE_IWAPID_FLAG 0x40 /* vendor IE in IW advertisement protocol ID field */ -#define VNDR_IE_CUSTOM_FLAG 0x100 /* allow custom IE id */ - -#if defined(WLP2P) -/* P2P Action Frames flags (spec ordered) */ -#define VNDR_IE_GONREQ_FLAG 0x001000 -#define VNDR_IE_GONRSP_FLAG 0x002000 -#define VNDR_IE_GONCFM_FLAG 0x004000 -#define VNDR_IE_INVREQ_FLAG 0x008000 -#define VNDR_IE_INVRSP_FLAG 0x010000 -#define VNDR_IE_DISREQ_FLAG 0x020000 -#define VNDR_IE_DISRSP_FLAG 0x040000 -#define VNDR_IE_PRDREQ_FLAG 0x080000 -#define VNDR_IE_PRDRSP_FLAG 0x100000 - -#define VNDR_IE_P2PAF_SHIFT 12 -#endif /* WLP2P */ - -/* channel interference measurement (chanim) related defines */ - -/* chanim mode */ -#define CHANIM_DISABLE 0 /* disabled */ -#define CHANIM_DETECT 1 /* detection only */ -#define CHANIM_EXT 2 /* external state machine */ -#define CHANIM_ACT 3 /* full internal state machine, detect + act */ -#define CHANIM_MODE_MAX 4 - -/* define for apcs reason code */ -#define APCS_INIT 0 -#define APCS_IOCTL 1 -#define APCS_CHANIM 2 -#define APCS_CSTIMER 3 -#define APCS_BTA 4 -#define APCS_TXDLY 5 -#define APCS_NONACSD 6 -#define APCS_DFS_REENTRY 7 -#define APCS_TXFAIL 8 -#define APCS_MAX 9 - -/* number of ACS record entries */ -#define CHANIM_ACS_RECORD 10 - -/* CHANIM */ -#define CCASTATS_TXDUR 0 -#define CCASTATS_INBSS 1 -#define CCASTATS_OBSS 2 -#define CCASTATS_NOCTG 3 -#define CCASTATS_NOPKT 4 -#define CCASTATS_DOZE 5 -#define CCASTATS_TXOP 6 -#define CCASTATS_GDTXDUR 7 -#define CCASTATS_BDTXDUR 8 -#define CCASTATS_MAX 9 - -#define WL_CHANIM_COUNT_ALL 0xff -#define WL_CHANIM_COUNT_ONE 0x1 - -/* ap tpc modes */ -#define AP_TPC_OFF 0 -#define AP_TPC_BSS_PWR 1 /* BSS power control */ -#define AP_TPC_AP_PWR 2 /* AP power control */ -#define AP_TPC_AP_BSS_PWR 3 /* Both AP and BSS power control */ -#define AP_TPC_MAX_LINK_MARGIN 127 - -/* ap tpc modes */ -#define AP_TPC_OFF 0 -#define AP_TPC_BSS_PWR 1 /* BSS power control */ -#define AP_TPC_AP_PWR 2 /* AP power control */ -#define AP_TPC_AP_BSS_PWR 3 /* Both AP and BSS power control */ -#define AP_TPC_MAX_LINK_MARGIN 127 - -/* state */ -#define WL_P2P_DISC_ST_SCAN 0 -#define WL_P2P_DISC_ST_LISTEN 1 -#define WL_P2P_DISC_ST_SEARCH 2 - -/* i/f type */ -#define WL_P2P_IF_CLIENT 0 -#define WL_P2P_IF_GO 1 -#define WL_P2P_IF_DYNBCN_GO 2 -#define WL_P2P_IF_DEV 3 - -/* count */ -#define WL_P2P_SCHED_RSVD 0 -#define WL_P2P_SCHED_REPEAT 255 /* anything > 255 will be treated as 255 */ - -#define WL_P2P_SCHED_FIXED_LEN 3 - -/* schedule type */ -#define WL_P2P_SCHED_TYPE_ABS 0 /* Scheduled Absence */ -#define WL_P2P_SCHED_TYPE_REQ_ABS 1 /* Requested Absence */ - -/* schedule action during absence periods (for WL_P2P_SCHED_ABS type) */ -#define WL_P2P_SCHED_ACTION_NONE 0 /* no action */ -#define WL_P2P_SCHED_ACTION_DOZE 1 /* doze */ -/* schedule option - WL_P2P_SCHED_TYPE_REQ_ABS */ -#define WL_P2P_SCHED_ACTION_GOOFF 2 /* turn off GO beacon/prbrsp functions */ -/* schedule option - WL_P2P_SCHED_TYPE_XXX */ -#define WL_P2P_SCHED_ACTION_RESET 255 /* reset */ - -/* schedule option - WL_P2P_SCHED_TYPE_ABS */ -#define WL_P2P_SCHED_OPTION_NORMAL 0 /* normal start/interval/duration/count */ -#define WL_P2P_SCHED_OPTION_BCNPCT 1 /* percentage of beacon interval */ -/* schedule option - WL_P2P_SCHED_TYPE_REQ_ABS */ -#define WL_P2P_SCHED_OPTION_TSFOFS 2 /* normal start/internal/duration/count with - * start being an offset of the 'current' TSF - */ - -/* feature flags */ -#define WL_P2P_FEAT_GO_CSA (1 << 0) /* GO moves with the STA using CSA method */ -#define WL_P2P_FEAT_GO_NOLEGACY (1 << 1) /* GO does not probe respond to non-p2p probe - * requests - */ -#define WL_P2P_FEAT_RESTRICT_DEV_RESP (1 << 2) /* Restrict p2p dev interface from responding */ - -/* n-mode support capability */ -/* 2x2 includes both 1x1 & 2x2 devices - * reserved #define 2 for future when we want to separate 1x1 & 2x2 and - * control it independently - */ -#define WL_11N_2x2 1 -#define WL_11N_3x3 3 -#define WL_11N_4x4 4 - -/* define 11n feature disable flags */ -#define WLFEATURE_DISABLE_11N 0x00000001 -#define WLFEATURE_DISABLE_11N_STBC_TX 0x00000002 -#define WLFEATURE_DISABLE_11N_STBC_RX 0x00000004 -#define WLFEATURE_DISABLE_11N_SGI_TX 0x00000008 -#define WLFEATURE_DISABLE_11N_SGI_RX 0x00000010 -#define WLFEATURE_DISABLE_11N_AMPDU_TX 0x00000020 -#define WLFEATURE_DISABLE_11N_AMPDU_RX 0x00000040 -#define WLFEATURE_DISABLE_11N_GF 0x00000080 - -/* Proxy STA modes */ -#define PSTA_MODE_DISABLED 0 -#define PSTA_MODE_PROXY 1 -#define PSTA_MODE_REPEATER 2 - -/* op code in nat_cfg */ -#define NAT_OP_ENABLE 1 /* enable NAT on given interface */ -#define NAT_OP_DISABLE 2 /* disable NAT on given interface */ -#define NAT_OP_DISABLE_ALL 3 /* disable NAT on all interfaces */ - -/* NAT state */ -#define NAT_STATE_ENABLED 1 /* NAT is enabled */ -#define NAT_STATE_DISABLED 2 /* NAT is disabled */ - -#define CHANNEL_5G_LOW_START 36 /* 5G low (36..48) CDD enable/disable bit mask */ -#define CHANNEL_5G_MID_START 52 /* 5G mid (52..64) CDD enable/disable bit mask */ -#define CHANNEL_5G_HIGH_START 100 /* 5G high (100..140) CDD enable/disable bit mask */ -#define CHANNEL_5G_UPPER_START 149 /* 5G upper (149..161) CDD enable/disable bit mask */ - -/* D0 Coalescing */ -#define IPV4_ARP_FILTER 0x0001 -#define IPV4_NETBT_FILTER 0x0002 -#define IPV4_LLMNR_FILTER 0x0004 -#define IPV4_SSDP_FILTER 0x0008 -#define IPV4_WSD_FILTER 0x0010 -#define IPV6_NETBT_FILTER 0x0200 -#define IPV6_LLMNR_FILTER 0x0400 -#define IPV6_SSDP_FILTER 0x0800 -#define IPV6_WSD_FILTER 0x1000 - -/* Network Offload Engine */ -#define NWOE_OL_ENABLE 0x00000001 - -/* - * Traffic management structures/defines. - */ - -/* Traffic management bandwidth parameters */ -#define TRF_MGMT_MAX_PRIORITIES 3 - -#define TRF_MGMT_FLAG_ADD_DSCP 0x0001 /* Add DSCP to IP TOS field */ -#define TRF_MGMT_FLAG_DISABLE_SHAPING 0x0002 /* Don't shape traffic */ -#define TRF_MGMT_FLAG_MANAGE_LOCAL_TRAFFIC 0x0008 /* Manage traffic over our local subnet */ -#define TRF_MGMT_FLAG_FILTER_ON_MACADDR 0x0010 /* filter on MAC address */ -#define TRF_MGMT_FLAG_NO_RX 0x0020 /* do not apply fiters to rx packets */ - -#define TRF_FILTER_MAC_ADDR 0x0001 /* L2 filter use dst mac address for filtering */ -#define TRF_FILTER_IP_ADDR 0x0002 /* L3 filter use ip ddress for filtering */ -#define TRF_FILTER_L4 0x0004 /* L4 filter use tcp/udp for filtering */ -#define TRF_FILTER_DWM 0x0008 /* L3 filter use DSCP for filtering */ -#define TRF_FILTER_FAVORED 0x0010 /* Tag the packet FAVORED */ - -/* WNM/NPS subfeatures mask */ -#define WL_WNM_BSSTRANS 0x00000001 -#define WL_WNM_PROXYARP 0x00000002 -#define WL_WNM_MAXIDLE 0x00000004 -#define WL_WNM_TIMBC 0x00000008 -#define WL_WNM_TFS 0x00000010 -#define WL_WNM_SLEEP 0x00000020 -#define WL_WNM_DMS 0x00000040 -#define WL_WNM_FMS 0x00000080 -#define WL_WNM_NOTIF 0x00000100 -#define WL_WNM_MAX 0x00000200 - -#ifndef ETHER_MAX_DATA -#define ETHER_MAX_DATA 1500 -#endif /* ETHER_MAX_DATA */ - -/* Different discovery modes for dpt */ -#define DPT_DISCOVERY_MANUAL 0x01 /* manual discovery mode */ -#define DPT_DISCOVERY_AUTO 0x02 /* auto discovery mode */ -#define DPT_DISCOVERY_SCAN 0x04 /* scan-based discovery mode */ - -/* different path selection values */ -#define DPT_PATHSEL_AUTO 0 /* auto mode for path selection */ -#define DPT_PATHSEL_DIRECT 1 /* always use direct DPT path */ -#define DPT_PATHSEL_APPATH 2 /* always use AP path */ - -/* different ops for deny list */ -#define DPT_DENY_LIST_ADD 1 /* add to dpt deny list */ -#define DPT_DENY_LIST_REMOVE 2 /* remove from dpt deny list */ - -/* different ops for manual end point */ -#define DPT_MANUAL_EP_CREATE 1 /* create manual dpt endpoint */ -#define DPT_MANUAL_EP_MODIFY 2 /* modify manual dpt endpoint */ -#define DPT_MANUAL_EP_DELETE 3 /* delete manual dpt endpoint */ - -/* flags to indicate DPT status */ -#define DPT_STATUS_ACTIVE 0x01 /* link active (though may be suspended) */ -#define DPT_STATUS_AES 0x02 /* link secured through AES encryption */ -#define DPT_STATUS_FAILED 0x04 /* DPT link failed */ - -#ifdef WLTDLS -/* different ops for manual end point */ -#define TDLS_MANUAL_EP_CREATE 1 /* create manual dpt endpoint */ -#define TDLS_MANUAL_EP_MODIFY 2 /* modify manual dpt endpoint */ -#define TDLS_MANUAL_EP_DELETE 3 /* delete manual dpt endpoint */ -#define TDLS_MANUAL_EP_PM 4 /* put dpt endpoint in PM mode */ -#define TDLS_MANUAL_EP_WAKE 5 /* wake up dpt endpoint from PM */ -#define TDLS_MANUAL_EP_DISCOVERY 6 /* discover if endpoint is TDLS capable */ -#define TDLS_MANUAL_EP_CHSW 7 /* channel switch */ -#define TDLS_MANUAL_EP_WFD_TPQ 8 /* WiFi-Display Tunneled Probe reQuest */ - -/* modes */ -#define TDLS_WFD_IE_TX 0 -#define TDLS_WFD_IE_RX 1 -#define TDLS_WFD_PROBE_IE_TX 2 -#define TDLS_WFD_PROBE_IE_RX 3 -#endif /* WLTDLS */ - -/* define for flag */ -#define TSPEC_PENDING 0 /* TSPEC pending */ -#define TSPEC_ACCEPTED 1 /* TSPEC accepted */ -#define TSPEC_REJECTED 2 /* TSPEC rejected */ -#define TSPEC_UNKNOWN 3 /* TSPEC unknown */ -#define TSPEC_STATUS_MASK 7 /* TSPEC status mask */ - -#ifdef BCMCCX -/* "wlan_reason" iovar interface */ -#define WL_WLAN_ASSOC_REASON_NORMAL_NETWORK 0 /* normal WLAN network setup */ -#define WL_WLAN_ASSOC_REASON_ROAM_FROM_CELLULAR_NETWORK 1 /* roam from Cellular network */ -#define WL_WLAN_ASSOC_REASON_ROAM_FROM_LAN 2 /* roam from LAN */ -#define WL_WLAN_ASSOC_REASON_MAX 2 /* largest value allowed */ -#endif /* BCMCCX */ - -/* Software feature flag defines used by wlfeatureflag */ -#ifdef WLAFTERBURNER -#define WL_SWFL_ABBFL 0x0001 /* Allow Afterburner on systems w/o hardware BFL */ -#define WL_SWFL_ABENCORE 0x0002 /* Allow AB on non-4318E chips */ -#endif /* WLAFTERBURNER */ -#define WL_SWFL_NOHWRADIO 0x0004 -#define WL_SWFL_FLOWCONTROL 0x0008 /* Enable backpressure to OS stack */ -#define WL_SWFL_WLBSSSORT 0x0010 /* Per-port supports sorting of BSS */ - -#define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */ - -#define CSA_BROADCAST_ACTION_FRAME 0 /* csa broadcast action frame */ -#define CSA_UNICAST_ACTION_FRAME 1 /* csa unicast action frame */ - -/* Roaming trigger definitions for WLC_SET_ROAM_TRIGGER. - * - * (-100 < value < 0) value is used directly as a roaming trigger in dBm - * (0 <= value) value specifies a logical roaming trigger level from - * the list below - * - * WLC_GET_ROAM_TRIGGER always returns roaming trigger value in dBm, never - * the logical roam trigger value. - */ -#define WLC_ROAM_TRIGGER_DEFAULT 0 /* default roaming trigger */ -#define WLC_ROAM_TRIGGER_BANDWIDTH 1 /* optimize for bandwidth roaming trigger */ -#define WLC_ROAM_TRIGGER_DISTANCE 2 /* optimize for distance roaming trigger */ -#define WLC_ROAM_TRIGGER_AUTO 3 /* auto-detect environment */ -#define WLC_ROAM_TRIGGER_MAX_VALUE 3 /* max. valid value */ - -#define WLC_ROAM_NEVER_ROAM_TRIGGER (-100) /* Avoid Roaming by setting a large value */ - -/* Preferred Network Offload (PNO, formerly PFN) defines */ -#define WPA_AUTH_PFN_ANY 0xffffffff /* for PFN, match only ssid */ - -#define SORT_CRITERIA_BIT 0 -#define AUTO_NET_SWITCH_BIT 1 -#define ENABLE_BKGRD_SCAN_BIT 2 -#define IMMEDIATE_SCAN_BIT 3 -#define AUTO_CONNECT_BIT 4 -#define ENABLE_BD_SCAN_BIT 5 -#define ENABLE_ADAPTSCAN_BIT 6 -#define IMMEDIATE_EVENT_BIT 8 -#define SUPPRESS_SSID_BIT 9 -#define ENABLE_NET_OFFLOAD_BIT 10 - -#define SORT_CRITERIA_MASK 0x0001 -#define AUTO_NET_SWITCH_MASK 0x0002 -#define ENABLE_BKGRD_SCAN_MASK 0x0004 -#define IMMEDIATE_SCAN_MASK 0x0008 -#define AUTO_CONNECT_MASK 0x0010 - -#define ENABLE_BD_SCAN_MASK 0x0020 -#define ENABLE_ADAPTSCAN_MASK 0x00c0 -#define IMMEDIATE_EVENT_MASK 0x0100 -#define SUPPRESS_SSID_MASK 0x0200 -#define ENABLE_NET_OFFLOAD_MASK 0x0400 - -#define PFN_VERSION 2 -#define PFN_SCANRESULT_VERSION 1 -#define MAX_PFN_LIST_COUNT 16 - -#define PFN_COMPLETE 1 -#define PFN_INCOMPLETE 0 - -#define DEFAULT_BESTN 2 -#define DEFAULT_MSCAN 0 -#define DEFAULT_REPEAT 10 -#define DEFAULT_EXP 2 - -#define WL_PFN_SUPPRESSFOUND_MASK 0x08 -#define WL_PFN_SUPPRESSLOST_MASK 0x10 -#define WL_PFN_RSSI_MASK 0xff00 -#define WL_PFN_RSSI_SHIFT 8 - -#define WL_PFN_REPORT_ALLNET 0 -#define WL_PFN_REPORT_SSIDNET 1 -#define WL_PFN_REPORT_BSSIDNET 2 - -#define WL_PFN_CFG_FLAGS_PROHIBITED 0x00000001 /* Accept and use prohibited channels */ -#define WL_PFN_CFG_FLAGS_RESERVED 0xfffffffe /* Remaining reserved for future use */ - -#define WL_PFN_HIDDEN_BIT 2 -#define PNO_SCAN_MAX_FW 508*1000 /* max time scan time in msec */ -#define PNO_SCAN_MAX_FW_SEC PNO_SCAN_MAX_FW/1000 /* max time scan time in SEC */ -#define PNO_SCAN_MIN_FW_SEC 10 /* min time scan time in SEC */ -#define WL_PFN_HIDDEN_MASK 0x4 - -/* TCP Checksum Offload error injection for testing */ -#define TOE_ERRTEST_TX_CSUM 0x00000001 -#define TOE_ERRTEST_RX_CSUM 0x00000002 -#define TOE_ERRTEST_RX_CSUM2 0x00000004 - -/* ARP Offload feature flags for arp_ol iovar */ -#define ARP_OL_AGENT 0x00000001 -#define ARP_OL_SNOOP 0x00000002 -#define ARP_OL_HOST_AUTO_REPLY 0x00000004 -#define ARP_OL_PEER_AUTO_REPLY 0x00000008 - -/* ARP Offload error injection */ -#define ARP_ERRTEST_REPLY_PEER 0x1 -#define ARP_ERRTEST_REPLY_HOST 0x2 - -#define ARP_MULTIHOMING_MAX 8 /* Maximum local host IP addresses */ -#define ND_MULTIHOMING_MAX 10 /* Maximum local host IP addresses */ -#define ND_REQUEST_MAX 5 /* Max set of offload params */ - -/* AWDL AF flags for awdl_oob_af iovar */ -#define AWDL_OOB_AF_FILL_TSF_PARAMS 0x00000001 -#define AWDL_OOB_AF_FILL_SYNC_PARAMS 0x00000002 -#define AWDL_OOB_AF_FILL_ELECT_PARAMS 0x00000004 -#define AWDL_OOB_AF_PARAMS_SIZE 38 - -#define AWDL_OPMODE_AUTO 0 -#define AWDL_OPMODE_FIXED 1 - -#define AWDL_PEER_STATE_OPEN 0 -#define AWDL_PEER_STATE_CLOSE 1 - -#define SYNC_ROLE_SLAVE 0 -#define SYNC_ROLE_NE_MASTER 1 /* Non-election master */ -#define SYNC_ROLE_MASTER 2 - -/* peer opcode */ -#define AWDL_PEER_OP_ADD 0 -#define AWDL_PEER_OP_DEL 1 -#define AWDL_PEER_OP_INFO 2 -#define AWDL_PEER_OP_UPD 3 - -/* AOAC wake event flag */ -#define WAKE_EVENT_NLO_DISCOVERY_BIT 1 -#define WAKE_EVENT_AP_ASSOCIATION_LOST_BIT 2 -#define WAKE_EVENT_GTK_HANDSHAKE_ERROR_BIT 4 -#define WAKE_EVENT_4WAY_HANDSHAKE_REQUEST_BIT 8 - -#define MAX_NUM_WOL_PATTERN 16 /* LOGO requirements min 16 */ - -/* Packet filter operation mode */ -/* True: 1; False: 0 */ -#define PKT_FILTER_MODE_FORWARD_ON_MATCH 1 -/* Enable and disable pkt_filter as a whole */ -#define PKT_FILTER_MODE_DISABLE 2 -/* Cache first matched rx pkt(be queried by host later) */ -#define PKT_FILTER_MODE_PKT_CACHE_ON_MATCH 4 -/* If pkt_filter is enabled and no filter is set, don't forward anything */ -#define PKT_FILTER_MODE_PKT_FORWARD_OFF_DEFAULT 8 - -#ifdef DONGLEOVERLAYS -#define OVERLAY_IDX_MASK 0x000000ff -#define OVERLAY_IDX_SHIFT 0 -#define OVERLAY_FLAGS_MASK 0xffffff00 -#define OVERLAY_FLAGS_SHIFT 8 -/* overlay written to device memory immediately after loading the base image */ -#define OVERLAY_FLAG_POSTLOAD 0x100 -/* defer overlay download until the device responds w/WLC_E_OVL_DOWNLOAD event */ -#define OVERLAY_FLAG_DEFER_DL 0x200 -/* overlay downloaded prior to the host going to sleep */ -#define OVERLAY_FLAG_PRESLEEP 0x400 -#define OVERLAY_DOWNLOAD_CHUNKSIZE 1024 -#endif /* DONGLEOVERLAYS */ - -/* reuse two number in the sc/rc space */ -#define SMFS_CODE_MALFORMED 0xFFFE -#define SMFS_CODE_IGNORED 0xFFFD - -/* RFAWARE def */ -#define BCM_ACTION_RFAWARE 0x77 -#define BCM_ACTION_RFAWARE_DCS 0x01 - -/* DCS reason code define */ -#define BCM_DCS_IOVAR 0x1 -#define BCM_DCS_UNKNOWN 0xFF - - -#ifdef PROP_TXSTATUS -/* Bit definitions for tlv iovar */ -/* - * enable RSSI signals: - * WLFC_CTL_TYPE_RSSI - */ -#define WLFC_FLAGS_RSSI_SIGNALS 0x0001 - -/* enable (if/mac_open, if/mac_close,, mac_add, mac_del) signals: - * - * WLFC_CTL_TYPE_MAC_OPEN - * WLFC_CTL_TYPE_MAC_CLOSE - * - * WLFC_CTL_TYPE_INTERFACE_OPEN - * WLFC_CTL_TYPE_INTERFACE_CLOSE - * - * WLFC_CTL_TYPE_MACDESC_ADD - * WLFC_CTL_TYPE_MACDESC_DEL - * - */ -#define WLFC_FLAGS_XONXOFF_SIGNALS 0x0002 - -/* enable (status, fifo_credit, mac_credit) signals - * WLFC_CTL_TYPE_MAC_REQUEST_CREDIT - * WLFC_CTL_TYPE_TXSTATUS - * WLFC_CTL_TYPE_FIFO_CREDITBACK - */ -#define WLFC_FLAGS_CREDIT_STATUS_SIGNALS 0x0004 - -#define WLFC_FLAGS_HOST_PROPTXSTATUS_ACTIVE 0x0008 -#define WLFC_FLAGS_PSQ_GENERATIONFSM_ENABLE 0x0010 -#define WLFC_FLAGS_PSQ_ZERO_BUFFER_ENABLE 0x0020 -#define WLFC_FLAGS_HOST_RXRERODER_ACTIVE 0x0040 -#define WLFC_FLAGS_PKT_STAMP_SIGNALS 0x0080 - -#endif /* PROP_TXSTATUS */ - -#define WL_TIMBC_STATUS_AP_UNKNOWN 255 /* AP status for internal use only */ - -#define WL_DFRTS_LOGIC_OFF 0 /* Feature is disabled */ -#define WL_DFRTS_LOGIC_OR 1 /* OR all non-zero threshold conditions */ -#define WL_DFRTS_LOGIC_AND 2 /* AND all non-zero threshold conditions */ - -/* Definitions for Reliable Multicast */ -#define WL_RELMCAST_MAX_CLIENT 32 -#define WL_RELMCAST_FLAG_INBLACKLIST 1 -#define WL_RELMCAST_FLAG_ACTIVEACKER 2 -#define WL_RELMCAST_FLAG_RELMCAST 4 - -/* structures for proximity detection device role */ -#define WL_PROXD_MODE_DISABLE 0 -#define WL_PROXD_MODE_NEUTRAL 1 -#define WL_PROXD_MODE_INITIATOR 2 -#define WL_PROXD_MODE_TARGET 3 -#define WL_PROXD_RANDOM_WAKEUP 0x8000 - - -#ifdef NET_DETECT -#define NET_DETECT_MAX_WAKE_DATA_SIZE 2048 -#define NET_DETECT_MAX_PROFILES 16 -#define NET_DETECT_MAX_CHANNELS 50 -#endif /* NET_DETECT */ - -/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ -#define WL_RADIO_SW_DISABLE (1<<0) -#define WL_RADIO_HW_DISABLE (1<<1) -#define WL_RADIO_MPC_DISABLE (1<<2) -#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any channel */ - -#define WL_SPURAVOID_OFF 0 -#define WL_SPURAVOID_ON1 1 -#define WL_SPURAVOID_ON2 2 - - -#define WL_4335_SPURAVOID_ON1 1 -#define WL_4335_SPURAVOID_ON2 2 -#define WL_4335_SPURAVOID_ON3 3 -#define WL_4335_SPURAVOID_ON4 4 -#define WL_4335_SPURAVOID_ON5 5 -#define WL_4335_SPURAVOID_ON6 6 -#define WL_4335_SPURAVOID_ON7 7 -#define WL_4335_SPURAVOID_ON8 8 -#define WL_4335_SPURAVOID_ON9 9 - -/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ -#define WL_TXPWR_OVERRIDE (1U<<31) -#define WL_TXPWR_NEG (1U<<30) - - -/* phy types (returned by WLC_GET_PHYTPE) */ -#define WLC_PHY_TYPE_A 0 -#define WLC_PHY_TYPE_B 1 -#define WLC_PHY_TYPE_G 2 -#define WLC_PHY_TYPE_N 4 -#define WLC_PHY_TYPE_LP 5 -#define WLC_PHY_TYPE_SSN 6 -#define WLC_PHY_TYPE_HT 7 -#define WLC_PHY_TYPE_LCN 8 -#define WLC_PHY_TYPE_LCN40 10 -#define WLC_PHY_TYPE_AC 11 -#define WLC_PHY_TYPE_NULL 0xf - -/* Values for PM */ -#define PM_OFF 0 -#define PM_MAX 1 -#define PM_FAST 2 -#define PM_FORCE_OFF 3 /* use this bit to force PM off even bt is active */ - -#define WL_WME_CNT_VERSION 1 /* current version of wl_wme_cnt_t */ - -/* fbt_cap: FBT assoc / reassoc modes. */ -#define WLC_FBT_CAP_DRV_4WAY_AND_REASSOC 1 /* Driver 4-way handshake & reassoc (WLFBT). */ - -/* monitor_promisc_level bits */ -#define WL_MONPROMISC_PROMISC 0x0001 -#define WL_MONPROMISC_CTRL 0x0002 -#define WL_MONPROMISC_FCS 0x0004 - -/* TCP Checksum Offload defines */ -#define TOE_TX_CSUM_OL 0x00000001 -#define TOE_RX_CSUM_OL 0x00000002 - -#endif /* wlioctl_defs_h */ |