diff options
Diffstat (limited to 'drivers/net/wireless/bcmdhd/include/siutils.h')
-rw-r--r-- | drivers/net/wireless/bcmdhd/include/siutils.h | 234 |
1 files changed, 163 insertions, 71 deletions
diff --git a/drivers/net/wireless/bcmdhd/include/siutils.h b/drivers/net/wireless/bcmdhd/include/siutils.h index 4a5be1a..4be9a0d 100644 --- a/drivers/net/wireless/bcmdhd/include/siutils.h +++ b/drivers/net/wireless/bcmdhd/include/siutils.h @@ -2,7 +2,7 @@ * Misc utility routines for accessing the SOC Interconnects * of Broadcom HNBU chips. * - * Copyright (C) 1999-2012, Broadcom Corporation + * Copyright (C) 1999-2014, Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you @@ -22,89 +22,102 @@ * software in any way with any other Broadcom software provided under a license * other than the GPL, without Broadcom's express prior written consent. * - * $Id: siutils.h 364853 2012-10-25 18:54:06Z $ + * $Id: siutils.h 433599 2013-11-01 18:31:27Z $ */ #ifndef _siutils_h_ #define _siutils_h_ +#include <bcmutils.h> +/* + * Data structure to export all chip specific common variables + * public (read-only) portion of siutils handle returned by si_attach()/si_kattach() + */ struct si_pub { - uint socitype; - - uint bustype; - uint buscoretype; - uint buscorerev; - uint buscoreidx; - int ccrev; - uint32 cccaps; - uint32 cccaps_ext; - int pmurev; - uint32 pmucaps; - uint boardtype; - uint boardrev; - uint boardvendor; - uint boardflags; - uint boardflags2; - uint chip; - uint chiprev; - uint chippkg; - uint32 chipst; - bool issim; - uint socirev; + uint socitype; /* SOCI_SB, SOCI_AI */ + + uint bustype; /* SI_BUS, PCI_BUS */ + uint buscoretype; /* PCI_CORE_ID, PCIE_CORE_ID, PCMCIA_CORE_ID */ + uint buscorerev; /* buscore rev */ + uint buscoreidx; /* buscore index */ + int ccrev; /* chip common core rev */ + uint32 cccaps; /* chip common capabilities */ + uint32 cccaps_ext; /* chip common capabilities extension */ + int pmurev; /* pmu core rev */ + uint32 pmucaps; /* pmu capabilities */ + uint boardtype; /* board type */ + uint boardrev; /* board rev */ + uint boardvendor; /* board vendor */ + uint boardflags; /* board flags */ + uint boardflags2; /* board flags2 */ + uint chip; /* chip number */ + uint chiprev; /* chip revision */ + uint chippkg; /* chip package option */ + uint32 chipst; /* chip status */ + bool issim; /* chip is in simulation or emulation */ + uint socirev; /* SOC interconnect rev */ bool pci_pr32414; }; - +/* for HIGH_ONLY driver, the si_t must be writable to allow states sync from BMAC to HIGH driver + * for monolithic driver, it is readonly to prevent accident change + */ typedef const struct si_pub si_t; - -#define SI_OSH NULL +/* + * Many of the routines below take an 'sih' handle as their first arg. + * Allocate this by calling si_attach(). Free it by calling si_detach(). + * At any one time, the sih is logically focused on one particular si core + * (the "current core"). + * Use si_setcore() or si_setcoreidx() to change the association to another core. + */ +#define SI_OSH NULL /* Use for si_kattach when no osh is available */ #define BADIDX (SI_MAXCORES + 1) +/* clkctl xtal what flags */ +#define XTAL 0x1 /* primary crystal oscillator (2050) */ +#define PLL 0x2 /* main chip pll */ -#define XTAL 0x1 -#define PLL 0x2 - - -#define CLK_FAST 0 -#define CLK_DYNAMIC 2 - - -#define GPIO_DRV_PRIORITY 0 -#define GPIO_APP_PRIORITY 1 -#define GPIO_HI_PRIORITY 2 +/* clkctl clk mode */ +#define CLK_FAST 0 /* force fast (pll) clock */ +#define CLK_DYNAMIC 2 /* enable dynamic clock control */ +/* GPIO usage priorities */ +#define GPIO_DRV_PRIORITY 0 /* Driver */ +#define GPIO_APP_PRIORITY 1 /* Application */ +#define GPIO_HI_PRIORITY 2 /* Highest priority. Ignore GPIO reservation */ +/* GPIO pull up/down */ #define GPIO_PULLUP 0 #define GPIO_PULLDN 1 +/* GPIO event regtype */ +#define GPIO_REGEVT 0 /* GPIO register event */ +#define GPIO_REGEVT_INTMSK 1 /* GPIO register event int mask */ +#define GPIO_REGEVT_INTPOL 2 /* GPIO register event int polarity */ -#define GPIO_REGEVT 0 -#define GPIO_REGEVT_INTMSK 1 -#define GPIO_REGEVT_INTPOL 2 - - -#define SI_DEVPATH_BUFSZ 16 - +/* device path */ +#define SI_DEVPATH_BUFSZ 16 /* min buffer size in bytes */ +/* SI routine enumeration: to be used by update function with multiple hooks */ #define SI_DOATTACH 1 #define SI_PCIDOWN 2 #define SI_PCIUP 3 -#define ISSIM_ENAB(sih) 0 - +#define ISSIM_ENAB(sih) FALSE +/* PMU clock/power control */ #if defined(BCMPMUCTL) #define PMUCTL_ENAB(sih) (BCMPMUCTL) #else #define PMUCTL_ENAB(sih) ((sih)->cccaps & CC_CAP_PMU) #endif - +/* chipcommon clock/power control (exclusive with PMU's) */ #if defined(BCMPMUCTL) && BCMPMUCTL #define CCCTL_ENAB(sih) (0) #define CCPLL_ENAB(sih) (0) @@ -114,20 +127,22 @@ typedef const struct si_pub si_t; #endif typedef void (*gpio_handler_t)(uint32 stat, void *arg); - +typedef void (*gci_gpio_handler_t)(uint32 stat, void *arg); +/* External BT Coex enable mask */ #define CC_BTCOEX_EN_MASK 0x01 - +/* External PA enable mask */ #define GPIO_CTRL_EPA_EN_MASK 0x40 - +/* WL/BT control enable mask */ #define GPIO_CTRL_5_6_EN_MASK 0x60 #define GPIO_CTRL_7_6_EN_MASK 0xC0 #define GPIO_OUT_7_EN_MASK 0x80 - +/* CR4 specific defines used by the host driver */ #define SI_CR4_CAP (0x04) #define SI_CR4_BANKIDX (0x40) #define SI_CR4_BANKINFO (0x44) +#define SI_CR4_BANKPDA (0x4C) #define ARMCR4_TCBBNB_MASK 0xf0 #define ARMCR4_TCBBNB_SHIFT 4 @@ -138,8 +153,7 @@ typedef void (*gpio_handler_t)(uint32 stat, void *arg); #define ARMCR4_BSZ_MASK 0x3f #define ARMCR4_BSZ_MULT 8192 - - +/* === exported functions === */ extern si_t *si_attach(uint pcidev, osl_t *osh, void *regs, uint bustype, void *sdh, char **vars, uint *varsz); extern si_t *si_kattach(osl_t *osh); @@ -149,6 +163,7 @@ extern bool si_pci_war16165(si_t *sih); extern uint si_corelist(si_t *sih, uint coreid[]); extern uint si_coreid(si_t *sih); extern uint si_flag(si_t *sih); +extern uint si_flag_alt(si_t *sih); extern uint si_intflag(si_t *sih); extern uint si_coreidx(si_t *sih); extern uint si_coreunit(si_t *sih); @@ -157,13 +172,16 @@ extern uint si_corerev(si_t *sih); extern void *si_osh(si_t *sih); extern void si_setosh(si_t *sih, osl_t *osh); extern uint si_corereg(si_t *sih, uint coreidx, uint regoff, uint mask, uint val); +extern uint32 *si_corereg_addr(si_t *sih, uint coreidx, uint regoff); extern void *si_coreregs(si_t *sih); extern uint si_wrapperreg(si_t *sih, uint32 offset, uint32 mask, uint32 val); extern uint si_core_wrapperreg(si_t *sih, uint32 coreidx, uint32 offset, uint32 mask, uint32 val); +extern void *si_wrapperregs(si_t *sih); extern uint32 si_core_cflags(si_t *sih, uint32 mask, uint32 val); extern void si_core_cflags_wo(si_t *sih, uint32 mask, uint32 val); extern uint32 si_core_sflags(si_t *sih, uint32 mask, uint32 val); extern bool si_iscoreup(si_t *sih); +extern uint si_numcoreunits(si_t *sih, uint coreid); extern uint si_findcoreidx(si_t *sih, uint coreid, uint coreunit); extern void *si_setcoreidx(si_t *sih, uint coreidx); extern void *si_setcore(si_t *sih, uint coreid, uint coreunit); @@ -177,6 +195,7 @@ extern int si_corebist(si_t *sih); extern void si_core_reset(si_t *sih, uint32 bits, uint32 resetbits); extern void si_core_disable(si_t *sih, uint32 bits); extern uint32 si_clock_rate(uint32 pll_type, uint32 n, uint32 m); +extern uint si_chip_hostif(si_t *sih); extern bool si_read_pmu_autopll(si_t *sih); extern uint32 si_clock(si_t *sih); extern uint32 si_alp_clock(si_t *sih); @@ -219,13 +238,24 @@ extern uint32 si_gpiorelease(si_t *sih, uint32 gpio_num, uint8 priority); extern uint32 si_gpiopull(si_t *sih, bool updown, uint32 mask, uint32 val); extern uint32 si_gpioevent(si_t *sih, uint regtype, uint32 mask, uint32 val); extern uint32 si_gpio_int_enable(si_t *sih, bool enable); +extern void si_gci_enable_gpio(si_t *sih, uint8 gpio, uint32 mask, uint32 value); +extern uint8 si_gci_host_wake_gpio_init(si_t *sih); +extern void si_gci_host_wake_gpio_enable(si_t *sih, uint8 gpio, bool state); - +/* GPIO event handlers */ extern void *si_gpio_handler_register(si_t *sih, uint32 e, bool lev, gpio_handler_t cb, void *arg); extern void si_gpio_handler_unregister(si_t *sih, void* gpioh); extern void si_gpio_handler_process(si_t *sih); +/* GCI interrupt handlers */ +extern void si_gci_handler_process(si_t *sih); + +/* GCI GPIO event handlers */ +extern void *si_gci_gpioint_handler_register(si_t *sih, uint8 gpio, uint8 sts, + gci_gpio_handler_t cb, void *arg); +extern void si_gci_gpioint_handler_unregister(si_t *sih, void* gci_i); +/* Wake-on-wireless-LAN (WOWL) */ extern bool si_pci_pmecap(si_t *sih); struct osl_info; extern bool si_pci_fastpmecap(struct osl_info *osh); @@ -234,6 +264,8 @@ extern void si_pci_pmeclr(si_t *sih); extern void si_pci_pmeen(si_t *sih); extern void si_pci_pmestatclr(si_t *sih); extern uint si_pcie_readreg(void *sih, uint addrtype, uint offset); +extern uint si_pcie_writereg(void *sih, uint addrtype, uint offset, uint val); + extern void si_sdio_init(si_t *sih); @@ -247,37 +279,42 @@ static INLINE void * si_eci_init(si_t *sih) {return NULL;} #define si_seci(sih) 0 #define si_seci_upd(sih, a) do {} while (0) static INLINE void * si_seci_init(si_t *sih, uint8 use_seci) {return NULL;} +static INLINE void * si_gci_init(si_t *sih) {return NULL;} #define si_seci_down(sih) do {} while (0) #define si_gci(sih) 0 -static INLINE void * si_gci_init(si_t *sih) {return NULL;} - +/* OTP status */ extern bool si_is_otp_disabled(si_t *sih); extern bool si_is_otp_powered(si_t *sih); -extern void si_otp_power(si_t *sih, bool on); - +extern void si_otp_power(si_t *sih, bool on, uint32* min_res_mask); +/* SPROM availability */ extern bool si_is_sprom_available(si_t *sih); extern bool si_is_sprom_enabled(si_t *sih); extern void si_sprom_enable(si_t *sih, bool enable); - +/* OTP/SROM CIS stuff */ extern int si_cis_source(si_t *sih); #define CIS_DEFAULT 0 #define CIS_SROM 1 #define CIS_OTP 2 +/* Fab-id information */ +#define DEFAULT_FAB 0x0 /* Original/first fab used for this chip */ +#define CSM_FAB7 0x1 /* CSM Fab7 chip */ +#define TSMC_FAB12 0x2 /* TSMC Fab12/Fab14 chip */ +#define SMIC_FAB4 0x3 /* SMIC Fab4 chip */ -#define DEFAULT_FAB 0x0 -#define CSM_FAB7 0x1 -#define TSMC_FAB12 0x2 -#define SMIC_FAB4 0x3 extern int si_otp_fabid(si_t *sih, uint16 *fabid, bool rw); extern uint16 si_fabid(si_t *sih); - +/* + * Build device path. Path size must be >= SI_DEVPATH_BUFSZ. + * The returned path is NULL terminated and has trailing '/'. + * Return 0 on success, nonzero otherwise. + */ extern int si_devpath(si_t *sih, char *path, int size); - +/* Read variable with prepending the devpath to the name */ extern char *si_getdevpathvar(si_t *sih, const char *name); extern int si_getdevpathintvar(si_t *sih, const char *name); extern char *si_coded_devpathvar(si_t *sih, char *varname, int var_len, const char *name); @@ -286,7 +323,13 @@ extern char *si_coded_devpathvar(si_t *sih, char *varname, int var_len, const ch extern uint8 si_pcieclkreq(si_t *sih, uint32 mask, uint32 val); extern uint32 si_pcielcreg(si_t *sih, uint32 mask, uint32 val); extern uint8 si_pcieltrenable(si_t *sih, uint32 mask, uint32 val); +extern uint8 si_pcieobffenable(si_t *sih, uint32 mask, uint32 val); +extern uint32 si_pcieltr_reg(si_t *sih, uint32 reg, uint32 mask, uint32 val); +extern uint32 si_pcieltrspacing_reg(si_t *sih, uint32 mask, uint32 val); +extern uint32 si_pcieltrhysteresiscnt_reg(si_t *sih, uint32 mask, uint32 val); extern void si_pcie_set_error_injection(si_t *sih, uint32 mode); +extern void si_pcie_set_L1substate(si_t *sih, uint32 substate); +extern uint32 si_pcie_get_L1substate(si_t *sih); extern void si_war42780_clkreq(si_t *sih, bool clkreq); extern void si_pci_down(si_t *sih); extern void si_pci_up(si_t *sih); @@ -303,21 +346,22 @@ extern uint32 si_chipcontrl_read(si_t *sih); extern void si_chipcontrl_epa4331(si_t *sih, bool on); extern void si_chipcontrl_epa4331_wowl(si_t *sih, bool enter_wowl); extern void si_chipcontrl_srom4360(si_t *sih, bool on); - +/* Enable BT-COEX & Ex-PA for 4313 */ extern void si_epa_4313war(si_t *sih); extern void si_btc_enable_chipcontrol(si_t *sih); - +/* BT/WL selection for 4313 bt combo >= P250 boards */ extern void si_btcombo_p250_4313_war(si_t *sih); extern void si_btcombo_43228_war(si_t *sih); extern void si_clk_pmu_htavail_set(si_t *sih, bool set_clear); extern void si_pmu_synth_pwrsw_4313_war(si_t *sih); extern uint si_pll_reset(si_t *sih); - +/* === debug routines === */ extern bool si_taclear(si_t *sih, bool details); +extern uint32 si_ccreg(si_t *sih, uint32 offset, uint32 mask, uint32 val); extern uint32 si_pciereg(si_t *sih, uint32 offset, uint32 mask, uint32 val, uint type); extern uint32 si_pcieserdesreg(si_t *sih, uint32 mdioslave, uint32 offset, uint32 mask, uint32 val); extern void si_pcie_set_request_size(si_t *sih, uint16 size); @@ -334,14 +378,62 @@ char *si_getnvramflvar(si_t *sih, const char *name); extern uint32 si_tcm_size(si_t *sih); +extern bool si_has_flops(si_t *sih); extern int si_set_sromctl(si_t *sih, uint32 value); extern uint32 si_get_sromctl(si_t *sih); extern uint32 si_gci_direct(si_t *sih, uint offset, uint32 mask, uint32 val); +extern uint32 si_gci_indirect(si_t *sih, uint regidx, uint offset, uint32 mask, uint32 val); +extern uint32 si_gci_output(si_t *sih, uint reg, uint32 mask, uint32 val); +extern uint32 si_gci_input(si_t *sih, uint reg); +extern uint32 si_gci_int_enable(si_t *sih, bool enable); extern void si_gci_reset(si_t *sih); +extern void si_ercx_init(si_t *sih); +extern void si_wci2_init(si_t *sih, uint baudrate); +extern void si_gci_seci_init(si_t *sih); extern void si_gci_set_functionsel(si_t *sih, uint32 pin, uint8 fnsel); extern uint8 si_gci_get_chipctrlreg_idx(uint32 pin, uint32 *regidx, uint32 *pos); extern uint32 si_gci_chipcontrol(si_t *sih, uint reg, uint32 mask, uint32 val); - -#endif +extern uint32 si_gci_chipstatus(si_t *sih, uint reg); +extern uint16 si_cc_get_reg16(uint32 reg_offs); +extern uint32 si_cc_get_reg32(uint32 reg_offs); +extern uint32 si_cc_set_reg32(uint32 reg_offs, uint32 val); +extern uint32 si_gci_preinit_upd_indirect(uint32 regidx, uint32 setval, uint32 mask); +extern uint8 si_enable_device_wake(si_t *sih, uint8 *wake_status, uint8 *cur_status); + +#define CHIPCTRLREG1 0x1 +#define CHIPCTRLREG2 0x2 +#define CHIPCTRLREG3 0x3 +#define CHIPCTRLREG4 0x4 +#define CHIPCTRLREG5 0x5 +#define MINRESMASKREG 0x618 +#define MAXRESMASKREG 0x61c +#define CHIPCTRLADDR 0x650 +#define CHIPCTRLDATA 0x654 +#define RSRCTABLEADDR 0x620 +#define RSRCUPDWNTIME 0x628 +#define PMUREG_RESREQ_MASK 0x68c + +void si_update_masks(si_t *sih); +void si_force_islanding(si_t *sih, bool enable); +extern uint32 si_pmu_res_req_timer_clr(si_t *sih); +extern void si_pmu_rfldo(si_t *sih, bool on); +extern void si_survive_perst_war(si_t *sih, bool reset, uint32 sperst_mask, uint32 spert_val); +extern void si_pcie_ltr_war(si_t *sih); + +/* Macro to enable clock gating changes in different cores */ +#define MEM_CLK_GATE_BIT 5 +#define GCI_CLK_GATE_BIT 18 + +#define USBAPP_CLK_BIT 0 +#define PCIE_CLK_BIT 3 +#define ARMCR4_DBG_CLK_BIT 4 +#define SAMPLE_SYNC_CLK_BIT 17 +#define PCIE_TL_CLK_BIT 18 +#define HQ_REQ_BIT 24 +#define PLL_DIV2_BIT_START 9 +#define PLL_DIV2_MASK (0x37 << PLL_DIV2_BIT_START) +#define PLL_DIV2_DIS_OP (0x37 << PLL_DIV2_BIT_START) + +#endif /* _siutils_h_ */ |