aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlegacy/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlegacy/Kconfig')
-rw-r--r--drivers/net/wireless/iwlegacy/Kconfig116
1 files changed, 116 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlegacy/Kconfig b/drivers/net/wireless/iwlegacy/Kconfig
new file mode 100644
index 0000000..2a45dd4
--- /dev/null
+++ b/drivers/net/wireless/iwlegacy/Kconfig
@@ -0,0 +1,116 @@
+config IWLWIFI_LEGACY
+ tristate "Intel Wireless Wifi legacy devices"
+ depends on PCI && MAC80211
+ select FW_LOADER
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_TRIGGERS
+ select MAC80211_LEDS
+
+menu "Debugging Options"
+ depends on IWLWIFI_LEGACY
+
+config IWLWIFI_LEGACY_DEBUG
+ bool "Enable full debugging output in 4965 and 3945 drivers"
+ depends on IWLWIFI_LEGACY
+ ---help---
+ This option will enable debug tracing output for the iwlwifilegacy
+ drivers.
+
+ This will result in the kernel module being ~100k larger. You can
+ control which debug output is sent to the kernel log by setting the
+ value in
+
+ /sys/class/net/wlan0/device/debug_level
+
+ This entry will only exist if this option is enabled.
+
+ To set a value, simply echo an 8-byte hex value to the same file:
+
+ % echo 0x43fff > /sys/class/net/wlan0/device/debug_level
+
+ You can find the list of debug mask values in:
+ drivers/net/wireless/iwlwifilegacy/iwl-debug.h
+
+ If this is your first time using this driver, you should say Y here
+ as the debug information can assist others in helping you resolve
+ any problems you may encounter.
+
+config IWLWIFI_LEGACY_DEBUGFS
+ bool "4965 and 3945 debugfs support"
+ depends on IWLWIFI_LEGACY && MAC80211_DEBUGFS
+ ---help---
+ Enable creation of debugfs files for the iwlwifilegacy drivers. This
+ is a low-impact option that allows getting insight into the
+ driver's state at runtime.
+
+config IWLWIFI_LEGACY_DEVICE_TRACING
+ bool "iwlwifilegacy legacy device access tracing"
+ depends on IWLWIFI_LEGACY
+ depends on EVENT_TRACING
+ help
+ Say Y here to trace all commands, including TX frames and IO
+ accesses, sent to the device. If you say yes, iwlwifilegacy will
+ register with the ftrace framework for event tracing and dump
+ all this information to the ringbuffer, you may need to
+ increase the ringbuffer size. See the ftrace documentation
+ for more information.
+
+ When tracing is not enabled, this option still has some
+ (though rather small) overhead.
+
+ If unsure, say Y so we can help you better when problems
+ occur.
+endmenu
+
+config IWL4965
+ tristate "Intel Wireless WiFi 4965AGN (iwl4965)"
+ depends on IWLWIFI_LEGACY
+ ---help---
+ This option enables support for
+
+ Select to build the driver supporting the:
+
+ Intel Wireless WiFi Link 4965AGN
+
+ This driver uses the kernel's mac80211 subsystem.
+
+ In order to use this driver, you will need a microcode (uCode)
+ image for it. You can obtain the microcode from:
+
+ <http://intellinuxwireless.org/>.
+
+ The microcode is typically installed in /lib/firmware. You can
+ look in the hotplug script /etc/hotplug/firmware.agent to
+ determine which directory FIRMWARE_DIR is set to when the script
+ runs.
+
+ If you want to compile the driver as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/kbuild/modules.txt>. The
+ module will be called iwl4965.
+
+config IWL3945
+ tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
+ depends on IWLWIFI_LEGACY
+ ---help---
+ Select to build the driver supporting the:
+
+ Intel PRO/Wireless 3945ABG/BG Network Connection
+
+ This driver uses the kernel's mac80211 subsystem.
+
+ In order to use this driver, you will need a microcode (uCode)
+ image for it. You can obtain the microcode from:
+
+ <http://intellinuxwireless.org/>.
+
+ The microcode is typically installed in /lib/firmware. You can
+ look in the hotplug script /etc/hotplug/firmware.agent to
+ determine which directory FIRMWARE_DIR is set to when the script
+ runs.
+
+ If you want to compile the driver as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/kbuild/modules.txt>. The
+ module will be called iwl3945.