diff options
Diffstat (limited to 'drivers/net/wireless/iwlegacy/iwl-power.c')
| -rw-r--r-- | drivers/net/wireless/iwlegacy/iwl-power.c | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlegacy/iwl-power.c b/drivers/net/wireless/iwlegacy/iwl-power.c new file mode 100644 index 0000000..903ef0d --- /dev/null +++ b/drivers/net/wireless/iwlegacy/iwl-power.c @@ -0,0 +1,165 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/init.h> + +#include <net/mac80211.h> + +#include "iwl-eeprom.h" +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-io.h" +#include "iwl-commands.h" +#include "iwl-debug.h" +#include "iwl-power.h" + +/* + * Setting power level allows the card to go to sleep when not busy. + * + * We calculate a sleep command based on the required latency, which + * we get from mac80211. In order to handle thermal throttling, we can + * also use pre-defined power levels. + */ + +/* + * This defines the old power levels. They are still used by default + * (level 1) and for thermal throttle (levels 3 through 5) + */ + +struct iwl_power_vec_entry { + struct iwl_powertable_cmd cmd; + u8 no_dtim; /* number of skip dtim */ +}; + +static void iwl_legacy_power_sleep_cam_cmd(struct iwl_priv *priv, + struct iwl_powertable_cmd *cmd) +{ + memset(cmd, 0, sizeof(*cmd)); + + if (priv->power_data.pci_pm) + cmd->flags |= IWL_POWER_PCI_PM_MSK; + + IWL_DEBUG_POWER(priv, "Sleep command for CAM\n"); +} + +static int +iwl_legacy_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd) +{ + IWL_DEBUG_POWER(priv, "Sending power/sleep command\n"); + IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags); + IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", + le32_to_cpu(cmd->tx_data_timeout)); + IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", + le32_to_cpu(cmd->rx_data_timeout)); + IWL_DEBUG_POWER(priv, + "Sleep interval vector = { %d , %d , %d , %d , %d }\n", + le32_to_cpu(cmd->sleep_interval[0]), + le32_to_cpu(cmd->sleep_interval[1]), + le32_to_cpu(cmd->sleep_interval[2]), + le32_to_cpu(cmd->sleep_interval[3]), + le32_to_cpu(cmd->sleep_interval[4])); + + return iwl_legacy_send_cmd_pdu(priv, POWER_TABLE_CMD, + sizeof(struct iwl_powertable_cmd), cmd); +} + +int +iwl_legacy_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd, + bool force) +{ + int ret; + bool update_chains; + + lockdep_assert_held(&priv->mutex); + + /* Don't update the RX chain when chain noise calibration is running */ + update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE || + priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE; + + if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force) + return 0; + + if (!iwl_legacy_is_ready_rf(priv)) + return -EIO; + + /* scan complete use sleep_power_next, need to be updated */ + memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd)); + if (test_bit(STATUS_SCANNING, &priv->status) && !force) { + IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n"); + return 0; + } + + if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK) + set_bit(STATUS_POWER_PMI, &priv->status); + + ret = iwl_legacy_set_power(priv, cmd); + if (!ret) { + if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)) + clear_bit(STATUS_POWER_PMI, &priv->status); + + if (priv->cfg->ops->lib->update_chain_flags && update_chains) + priv->cfg->ops->lib->update_chain_flags(priv); + else if (priv->cfg->ops->lib->update_chain_flags) + IWL_DEBUG_POWER(priv, + "Cannot update the power, chain noise " + "calibration running: %d\n", + priv->chain_noise_data.state); + + memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)); + } else + IWL_ERR(priv, "set power fail, ret = %d", ret); + + return ret; +} + +int iwl_legacy_power_update_mode(struct iwl_priv *priv, bool force) +{ + struct iwl_powertable_cmd cmd; + + iwl_legacy_power_sleep_cam_cmd(priv, &cmd); + return iwl_legacy_power_set_mode(priv, &cmd, force); +} +EXPORT_SYMBOL(iwl_legacy_power_update_mode); + +/* initialize to default */ +void iwl_legacy_power_initialize(struct iwl_priv *priv) +{ + u16 lctl = iwl_legacy_pcie_link_ctl(priv); + + priv->power_data.pci_pm = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN); + + priv->power_data.debug_sleep_level_override = -1; + + memset(&priv->power_data.sleep_cmd, 0, + sizeof(priv->power_data.sleep_cmd)); +} +EXPORT_SYMBOL(iwl_legacy_power_initialize); |