diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/conf.h')
| -rw-r--r-- | drivers/net/wireless/wl12xx/conf.h | 452 |
1 files changed, 226 insertions, 226 deletions
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h index c83fefb..04bb8fb 100644 --- a/drivers/net/wireless/wl12xx/conf.h +++ b/drivers/net/wireless/wl12xx/conf.h @@ -99,40 +99,75 @@ enum { enum { /* - * PER threshold in PPM of the BT voice + * Configure the min and max time BT gains the antenna + * in WLAN / BT master basic rate * - * Range: 0 - 10000000 + * Range: 0 - 255 (ms) */ - CONF_SG_BT_PER_THRESHOLD = 0, + CONF_SG_ACL_BT_MASTER_MIN_BR = 0, + CONF_SG_ACL_BT_MASTER_MAX_BR, /* - * Number of consequent RX_ACTIVE activities to override BT voice - * frames to ensure WLAN connection + * Configure the min and max time BT gains the antenna + * in WLAN / BT slave basic rate * - * Range: 0 - 100 + * Range: 0 - 255 (ms) */ - CONF_SG_HV3_MAX_OVERRIDE, + CONF_SG_ACL_BT_SLAVE_MIN_BR, + CONF_SG_ACL_BT_SLAVE_MAX_BR, /* - * Defines the PER threshold of the BT voice + * Configure the min and max time BT gains the antenna + * in WLAN / BT master EDR * - * Range: 0 - 65000 + * Range: 0 - 255 (ms) */ - CONF_SG_BT_NFS_SAMPLE_INTERVAL, + CONF_SG_ACL_BT_MASTER_MIN_EDR, + CONF_SG_ACL_BT_MASTER_MAX_EDR, /* - * Defines the load ratio of BT + * Configure the min and max time BT gains the antenna + * in WLAN / BT slave EDR * - * Range: 0 - 100 (%) + * Range: 0 - 255 (ms) */ - CONF_SG_BT_LOAD_RATIO, + CONF_SG_ACL_BT_SLAVE_MIN_EDR, + CONF_SG_ACL_BT_SLAVE_MAX_EDR, /* - * Defines whether the SG will force WLAN host to enter/exit PSM + * The maximum time WLAN can gain the antenna + * in WLAN PSM / BT master/slave BR * - * Range: 1 - SG can force, 0 - host handles PSM + * Range: 0 - 255 (ms) */ - CONF_SG_AUTO_PS_MODE, + CONF_SG_ACL_WLAN_PS_MASTER_BR, + CONF_SG_ACL_WLAN_PS_SLAVE_BR, + + /* + * The maximum time WLAN can gain the antenna + * in WLAN PSM / BT master/slave EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_ACL_WLAN_PS_MASTER_EDR, + CONF_SG_ACL_WLAN_PS_SLAVE_EDR, + + /* TODO: explain these values */ + CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR, + CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR, + CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR, + CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR, + CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR, + CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR, + CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR, + CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR, + + CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR, + CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR, + CONF_SG_ACL_PASSIVE_SCAN_BT_BR, + CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR, + CONF_SG_ACL_PASSIVE_SCAN_BT_EDR, + CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR, /* * Compensation percentage of probe requests when scan initiated @@ -151,102 +186,70 @@ enum { CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3, /* - * Defines antenna configuration (single/dual antenna) - * - * Range: 0 - single antenna, 1 - dual antenna - */ - CONF_SG_ANTENNA_CONFIGURATION, - - /* - * The threshold (percent) of max consequtive beacon misses before - * increasing priority of beacon reception. - * - * Range: 0 - 100 (%) - */ - CONF_SG_BEACON_MISS_PERCENT, - - /* - * The rate threshold below which receiving a data frame from the AP - * will increase the priority of the data frame above BT traffic. - * - * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54 - */ - CONF_SG_RATE_ADAPT_THRESH, - - /* - * Not used currently. + * Compensation percentage of WLAN active scan window if initiated + * during BT A2DP * - * Range: 0 + * Range: 0 - 1000 (%) */ - CONF_SG_RATE_ADAPT_SNR, + CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP, /* - * Configure the min and max time BT gains the antenna - * in WLAN PSM / BT master basic rate + * Compensation percentage of WLAN passive scan window if initiated + * during BT A2DP BR * - * Range: 0 - 255 (ms) + * Range: 0 - 1000 (%) */ - CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR, - CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR, + CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR, /* - * The time after it expires no new WLAN trigger frame is trasmitted - * in WLAN PSM / BT master basic rate + * Compensation percentage of WLAN passive scan window if initiated + * during BT A2DP EDR * - * Range: 0 - 255 (ms) + * Range: 0 - 1000 (%) */ - CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR, + CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR, /* - * Configure the min and max time BT gains the antenna - * in WLAN PSM / BT slave basic rate + * Compensation percentage of WLAN passive scan window if initiated + * during BT voice * - * Range: 0 - 255 (ms) + * Range: 0 - 1000 (%) */ - CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR, - CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR, + CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3, - /* - * The time after it expires no new WLAN trigger frame is trasmitted - * in WLAN PSM / BT slave basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR, + /* TODO: explain these values */ + CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN, + CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN, + CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN, /* - * Configure the min and max time BT gains the antenna - * in WLAN PSM / BT master EDR + * Defines whether the SG will force WLAN host to enter/exit PSM * - * Range: 0 - 255 (ms) + * Range: 1 - SG can force, 0 - host handles PSM */ - CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR, - CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR, + CONF_SG_STA_FORCE_PS_IN_BT_SCO, /* - * The time after it expires no new WLAN trigger frame is trasmitted - * in WLAN PSM / BT master EDR + * Defines antenna configuration (single/dual antenna) * - * Range: 0 - 255 (ms) + * Range: 0 - single antenna, 1 - dual antenna */ - CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR, + CONF_SG_ANTENNA_CONFIGURATION, /* - * Configure the min and max time BT gains the antenna - * in WLAN PSM / BT slave EDR + * The threshold (percent) of max consecutive beacon misses before + * increasing priority of beacon reception. * - * Range: 0 - 255 (ms) + * Range: 0 - 100 (%) */ - CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR, - CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR, + CONF_SG_BEACON_MISS_PERCENT, /* - * The time after it expires no new WLAN trigger frame is trasmitted - * in WLAN PSM / BT slave EDR + * Protection time of the DHCP procedure. * - * Range: 0 - 255 (ms) + * Range: 0 - 100000 (ms) */ - CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR, + CONF_SG_DHCP_TIME, /* * RX guard time before the beginning of a new BT voice frame during @@ -273,166 +276,59 @@ enum { */ CONF_SG_ADAPTIVE_RXT_TXT, - /* - * The used WLAN legacy service period during active BT ACL link - * - * Range: 0 - 255 (ms) - */ - CONF_SG_PS_POLL_TIMEOUT, - - /* - * The used WLAN UPSD service period during active BT ACL link - * - * Range: 0 - 255 (ms) - */ - CONF_SG_UPSD_TIMEOUT, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN Active / BT master EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR, - CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR, - - /* - * The maximum time WLAN can gain the antenna for - * in WLAN Active / BT master EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN Active / BT slave EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR, - CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR, + /* TODO: explain this value */ + CONF_SG_GENERAL_USAGE_BIT_MAP, /* - * The maximum time WLAN can gain the antenna for - * in WLAN Active / BT slave EDR + * Number of consecutive BT voice frames not interrupted by WLAN * - * Range: 0 - 255 (ms) + * Range: 0 - 100 */ - CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR, + CONF_SG_HV3_MAX_SERVED, /* - * Configure the min and max time BT gains the antenna - * in WLAN Active / BT basic rate + * The used WLAN legacy service period during active BT ACL link * * Range: 0 - 255 (ms) */ - CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR, - CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR, + CONF_SG_PS_POLL_TIMEOUT, /* - * The maximum time WLAN can gain the antenna for - * in WLAN Active / BT basic rate + * The used WLAN UPSD service period during active BT ACL link * * Range: 0 - 255 (ms) */ - CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR, - - /* - * Compensation percentage of WLAN passive scan window if initiated - * during BT voice - * - * Range: 0 - 1000 (%) - */ - CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3, - - /* - * Compensation percentage of WLAN passive scan window if initiated - * during BT A2DP - * - * Range: 0 - 1000 (%) - */ - CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP, - - /* - * Fixed time ensured for BT traffic to gain the antenna during WLAN - * passive scan. - * - * Range: 0 - 1000 ms - */ - CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME, - - /* - * Fixed time ensured for WLAN traffic to gain the antenna during WLAN - * passive scan. - * - * Range: 0 - 1000 ms - */ - CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME, + CONF_SG_UPSD_TIMEOUT, - /* - * Number of consequent BT voice frames not interrupted by WLAN - * - * Range: 0 - 100 - */ - CONF_SG_HV3_MAX_SERVED, + CONF_SG_CONSECUTIVE_CTS_THRESHOLD, + CONF_SG_STA_RX_WINDOW_AFTER_DTIM, + CONF_SG_STA_CONNECTION_PROTECTION_TIME, - /* - * Protection time of the DHCP procedure. - * - * Range: 0 - 100000 (ms) - */ - CONF_SG_DHCP_TIME, + /* AP params */ + CONF_AP_BEACON_MISS_TX, + CONF_AP_RX_WINDOW_AFTER_BEACON, + CONF_AP_BEACON_WINDOW_INTERVAL, + CONF_AP_CONNECTION_PROTECTION_TIME, + CONF_AP_BT_ACL_VAL_BT_SERVE_TIME, + CONF_AP_BT_ACL_VAL_WL_SERVE_TIME, - /* - * Compensation percentage of WLAN active scan window if initiated - * during BT A2DP - * - * Range: 0 - 1000 (%) - */ - CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP, CONF_SG_TEMP_PARAM_1, CONF_SG_TEMP_PARAM_2, CONF_SG_TEMP_PARAM_3, CONF_SG_TEMP_PARAM_4, CONF_SG_TEMP_PARAM_5, - - /* - * AP beacon miss - * - * Range: 0 - 255 - */ - CONF_SG_AP_BEACON_MISS_TX, - - /* - * AP RX window length - * - * Range: 0 - 50 - */ - CONF_SG_RX_WINDOW_LENGTH, - - /* - * AP connection protection time - * - * Range: 0 - 5000 - */ - CONF_SG_AP_CONNECTION_PROTECTION_TIME, - CONF_SG_TEMP_PARAM_6, CONF_SG_TEMP_PARAM_7, CONF_SG_TEMP_PARAM_8, CONF_SG_TEMP_PARAM_9, CONF_SG_TEMP_PARAM_10, - CONF_SG_STA_PARAMS_MAX = CONF_SG_TEMP_PARAM_5 + 1, - CONF_SG_AP_PARAMS_MAX = CONF_SG_TEMP_PARAM_10 + 1, - + CONF_SG_PARAMS_MAX, CONF_SG_PARAMS_ALL = 0xff }; struct conf_sg_settings { - u32 sta_params[CONF_SG_STA_PARAMS_MAX]; - u32 ap_params[CONF_SG_AP_PARAMS_MAX]; + u32 params[CONF_SG_PARAMS_MAX]; u8 state; }; @@ -520,13 +416,17 @@ struct conf_rx_settings { u8 queue_type; }; -#define CONF_TX_MAX_RATE_CLASSES 8 +#define CONF_TX_MAX_RATE_CLASSES 10 #define CONF_TX_RATE_MASK_UNSPECIFIED 0 #define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \ CONF_HW_BIT_RATE_2MBPS) #define CONF_TX_RATE_RETRY_LIMIT 10 +/* basic rates for p2p operations (probe req/resp, etc.) */ +#define CONF_TX_RATE_MASK_BASIC_P2P (CONF_HW_BIT_RATE_6MBPS | \ + CONF_HW_BIT_RATE_12MBPS | CONF_HW_BIT_RATE_24MBPS) + /* * Rates supported for data packets when operating as AP. Note the absence * of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop @@ -545,6 +445,11 @@ struct conf_rx_settings { CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \ CONF_HW_BIT_RATE_54MBPS) +#define CONF_TX_MCS_RATES (CONF_HW_BIT_RATE_MCS_0 | \ + CONF_HW_BIT_RATE_MCS_1 | CONF_HW_BIT_RATE_MCS_2 | \ + CONF_HW_BIT_RATE_MCS_3 | CONF_HW_BIT_RATE_MCS_4 | \ + CONF_HW_BIT_RATE_MCS_5 | CONF_HW_BIT_RATE_MCS_6 | \ + CONF_HW_BIT_RATE_MCS_7) /* * Default rates for management traffic when operating in AP mode. This @@ -553,12 +458,10 @@ struct conf_rx_settings { #define CONF_TX_AP_DEFAULT_MGMT_RATES (CONF_HW_BIT_RATE_1MBPS | \ CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS) -/* - * Default rates for working as IBSS. use 11b rates - */ +/* default rates for working as IBSS (11b and OFDM) */ #define CONF_TX_IBSS_DEFAULT_RATES (CONF_HW_BIT_RATE_1MBPS | \ CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \ - CONF_HW_BIT_RATE_11MBPS); + CONF_HW_BIT_RATE_11MBPS | CONF_TX_OFDM_RATES); struct conf_tx_rate_class { @@ -661,6 +564,9 @@ struct conf_tx_ac_category { #define CONF_TX_MAX_TID_COUNT 8 +/* Allow TX BA on all TIDs but 6,7. These are currently reserved in the FW */ +#define CONF_TX_BA_ENABLED_TID_BITMAP 0x3F + enum { CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/ CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/ @@ -713,8 +619,16 @@ struct conf_tx_settings { /* * AP-mode - allow this number of TX retries to a station before an * event is triggered from FW. + * In AP-mode the hlids of unreachable stations are given in the + * "sta_tx_retry_exceeded" member in the event mailbox. + */ + u8 max_tx_retries; + + /* + * AP-mode - after this number of seconds a connected station is + * considered inactive. */ - u16 ap_max_tx_retries; + u16 ap_aging_period; /* * Configuration for TID parameters. @@ -905,7 +819,7 @@ struct conf_conn_settings { struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT]; /* - * The number of consequtive beacons to lose, before the firmware + * The number of consecutive beacons to lose, before the firmware * becomes out of synch. * * Range: u32 @@ -943,7 +857,7 @@ struct conf_conn_settings { u8 rx_broadcast_in_ps; /* - * Consequtive PS Poll failures before sending event to driver + * Consecutive PS Poll failures before sending event to driver * * Range: u8 */ @@ -1004,14 +918,6 @@ struct conf_conn_settings { u8 psm_entry_nullfunc_retries; /* - * Specifies the time to linger in active mode after successfully - * transmitting the PSM entry null-func frame. - * - * Range 0 - 255 TU's - */ - u8 psm_entry_hangover_period; - - /* * * Specifies the interval of the connection keep-alive null-func * frame in ms. @@ -1191,8 +1097,12 @@ struct conf_rf_settings { }; struct conf_ht_setting { - u16 tx_ba_win_size; + u8 rx_ba_win_size; + u8 tx_ba_win_size; u16 inactivity_timeout; + + /* bitmap of enabled TIDs for TX BA sessions */ + u8 tx_ba_tid_bitmap; }; struct conf_memory_settings { @@ -1248,6 +1158,92 @@ struct conf_fm_coex { u8 swallow_clk_diff; }; +struct conf_rx_streaming_settings { + /* + * RX Streaming duration (in msec) from last tx/rx + * + * Range: u32 + */ + u32 duration; + + /* + * Bitmap of tids to be polled during RX streaming. + * (Note: it doesn't look like it really matters) + * + * Range: 0x1-0xff + */ + u8 queues; + + /* + * RX Streaming interval. + * (Note:this value is also used as the rx streaming timeout) + * Range: 0 (disabled), 10 - 100 + */ + u8 interval; + + /* + * enable rx streaming also when there is no coex activity + */ + u8 always; +}; + +struct conf_fwlog { + /* Continuous or on-demand */ + u8 mode; + + /* + * Number of memory blocks dedicated for the FW logger + * + * Range: 1-3, or 0 to disable the FW logger + */ + u8 mem_blocks; + + /* Minimum log level threshold */ + u8 severity; + + /* Include/exclude timestamps from the log messages */ + u8 timestamp; + + /* See enum wl1271_fwlogger_output */ + u8 output; + + /* Regulates the frequency of log messages */ + u8 threshold; +}; + +#define ACX_RATE_MGMT_NUM_OF_RATES 13 +struct conf_rate_policy_settings { + u16 rate_retry_score; + u16 per_add; + u16 per_th1; + u16 per_th2; + u16 max_per; + u8 inverse_curiosity_factor; + u8 tx_fail_low_th; + u8 tx_fail_high_th; + u8 per_alpha_shift; + u8 per_add_shift; + u8 per_beta1_shift; + u8 per_beta2_shift; + u8 rate_check_up; + u8 rate_check_down; + u8 rate_retry_policy[ACX_RATE_MGMT_NUM_OF_RATES]; +}; + +struct conf_hangover_settings { + u32 recover_time; + u8 hangover_period; + u8 dynamic_mode; + u8 early_termination_mode; + u8 max_period; + u8 min_period; + u8 increase_delta; + u8 decrease_delta; + u8 quiet_time; + u8 increase_time; + u8 window_size; +}; + struct conf_drv_settings { struct conf_sg_settings sg; struct conf_rx_settings rx; @@ -1263,6 +1259,10 @@ struct conf_drv_settings { struct conf_memory_settings mem_wl127x; struct conf_memory_settings mem_wl128x; struct conf_fm_coex fm_coex; + struct conf_rx_streaming_settings rx_streaming; + struct conf_fwlog fwlog; + struct conf_rate_policy_settings rate; + struct conf_hangover_settings hangover; u8 hci_io_ds; }; |