1 files changed, 30 insertions, 20 deletions

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 50a23da..fef1748 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -275,18 +275,19 @@ int pciehp_check_link_status(struct controller *ctrl)
          * hot-plug capable downstream port. But old controller might
          * not implement it. In this case, we wait for 1000 ms.
          */
-        if (ctrl->link_active_reporting){
-                /* Wait for Data Link Layer Link Active bit to be set */
+        if (ctrl->link_active_reporting)
                 pcie_wait_link_active(ctrl);
-                /*
-                 * We must wait for 100 ms after the Data Link Layer
-                 * Link Active bit reads 1b before initiating a
-                 * configuration access to the hot added device.
-                 */
-                msleep(100);
-        } else
+        else
                 msleep(1000);
 
+	/*
+	 * Need to wait for 1000 ms after Data Link Layer Link Active
+	 * (DLLLA) bit reads 1b before sending configuration request.
+	 * We need it before checking Link Training (LT) bit becuase
+	 * LT is still set even after DLLLA bit is set on some platform.
+	 */
+	msleep(1000);
+
 	retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
 	if (retval) {
 		ctrl_err(ctrl, "Cannot read LNKSTATUS register\n");
@@ -301,6 +302,16 @@ int pciehp_check_link_status(struct controller *ctrl)
 		return retval;
 	}
 
+	/*
+	 * If the port supports Link speeds greater than 5.0 GT/s, we
+	 * must wait for 100 ms after Link training completes before
+	 * sending configuration request.
+	 */
+	if (ctrl->pcie->port->subordinate->max_bus_speed > PCIE_SPEED_5_0GT)
+		msleep(100);
+
+	pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
+
 	return retval;
 }
 
@@ -491,7 +502,6 @@ int pciehp_power_on_slot(struct slot * slot)
 	u16 slot_cmd;
 	u16 cmd_mask;
 	u16 slot_status;
-	u16 lnk_status;
 	int retval = 0;
 
 	/* Clear sticky power-fault bit from previous power failures */
@@ -523,14 +533,6 @@ int pciehp_power_on_slot(struct slot * slot)
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
 
-	retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
-	if (retval) {
-		ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n",
-				__func__);
-		return retval;
-	}
-	pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
-
 	return retval;
 }
 
@@ -787,24 +789,32 @@ static void pcie_shutdown_notification(struct controller *ctrl)
 static int pcie_init_slot(struct controller *ctrl)
 {
 	struct slot *slot;
+	char name[32];
 
 	slot = kzalloc(sizeof(*slot), GFP_KERNEL);
 	if (!slot)
 		return -ENOMEM;
 
+	snprintf(name, sizeof(name), "pciehp-%u", PSN(ctrl));
+	slot->wq = alloc_workqueue(name, 0, 0);
+	if (!slot->wq)
+		goto abort;
+
 	slot->ctrl = ctrl;
 	mutex_init(&slot->lock);
 	INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
 	ctrl->slot = slot;
 	return 0;
+abort:
+	kfree(slot);
+	return -ENOMEM;
 }
 
 static void pcie_cleanup_slot(struct controller *ctrl)
 {
 	struct slot *slot = ctrl->slot;
 	cancel_delayed_work(&slot->work);
-	flush_workqueue(pciehp_wq);
-	flush_workqueue(pciehp_ordered_wq);
+	destroy_workqueue(slot->wq);
 	kfree(slot);
 }