diff options
Diffstat (limited to 'drivers/scsi/qla4xxx/ql4_init.c')
| -rw-r--r-- | drivers/scsi/qla4xxx/ql4_init.c | 1015 |
1 files changed, 321 insertions, 694 deletions
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 42ed5db..1bdfa81 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -11,9 +11,6 @@ #include "ql4_dbg.h" #include "ql4_inline.h" -static struct ddb_entry *qla4xxx_alloc_ddb(struct scsi_qla_host *ha, - uint32_t fw_ddb_index); - static void ql4xxx_set_mac_number(struct scsi_qla_host *ha) { uint32_t value; @@ -48,41 +45,15 @@ static void ql4xxx_set_mac_number(struct scsi_qla_host *ha) * @ha: pointer to host adapter structure. * @ddb_entry: pointer to device database entry * - * This routine deallocates and unlinks the specified ddb_entry from the - * adapter's + * This routine marks a DDB entry INVALID **/ void qla4xxx_free_ddb(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry) { - /* Remove device entry from list */ - list_del_init(&ddb_entry->list); - /* Remove device pointer from index mapping arrays */ ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = (struct ddb_entry *) INVALID_ENTRY; ha->tot_ddbs--; - - /* Free memory and scsi-ml struct for device entry */ - qla4xxx_destroy_sess(ddb_entry); -} - -/** - * qla4xxx_free_ddb_list - deallocate all ddbs - * @ha: pointer to host adapter structure. - * - * This routine deallocates and removes all devices on the sppecified adapter. - **/ -void qla4xxx_free_ddb_list(struct scsi_qla_host *ha) -{ - struct list_head *ptr; - struct ddb_entry *ddb_entry; - - while (!list_empty(&ha->ddb_list)) { - ptr = ha->ddb_list.next; - /* Free memory for device entry and remove */ - ddb_entry = list_entry(ptr, struct ddb_entry, list); - qla4xxx_free_ddb(ha, ddb_entry); - } } /** @@ -236,38 +207,44 @@ qla4xxx_wait_for_ip_config(struct scsi_qla_host *ha) FW_ADDSTATE_DHCPv4_LEASE_ACQUIRED) == 0)) { ipv4_wait = 1; } - if (((ha->ipv6_addl_options & - IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE) != 0) && - ((ha->ipv6_link_local_state == IP_ADDRSTATE_ACQUIRING) || - (ha->ipv6_addr0_state == IP_ADDRSTATE_ACQUIRING) || - (ha->ipv6_addr1_state == IP_ADDRSTATE_ACQUIRING))) { + if (((ha->ip_config.ipv6_addl_options & + IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE) != 0) && + ((ha->ip_config.ipv6_link_local_state == + IP_ADDRSTATE_ACQUIRING) || + (ha->ip_config.ipv6_addr0_state == + IP_ADDRSTATE_ACQUIRING) || + (ha->ip_config.ipv6_addr1_state == + IP_ADDRSTATE_ACQUIRING))) { ipv6_wait = 1; - if ((ha->ipv6_link_local_state == - IP_ADDRSTATE_PREFERRED) || - (ha->ipv6_addr0_state == IP_ADDRSTATE_PREFERRED) || - (ha->ipv6_addr1_state == IP_ADDRSTATE_PREFERRED)) { + if ((ha->ip_config.ipv6_link_local_state == + IP_ADDRSTATE_PREFERRED) || + (ha->ip_config.ipv6_addr0_state == + IP_ADDRSTATE_PREFERRED) || + (ha->ip_config.ipv6_addr1_state == + IP_ADDRSTATE_PREFERRED)) { DEBUG2(printk(KERN_INFO "scsi%ld: %s: " "Preferred IP configured." " Don't wait!\n", ha->host_no, __func__)); ipv6_wait = 0; } - if (memcmp(&ha->ipv6_default_router_addr, ip_address, - IPv6_ADDR_LEN) == 0) { + if (memcmp(&ha->ip_config.ipv6_default_router_addr, + ip_address, IPv6_ADDR_LEN) == 0) { DEBUG2(printk(KERN_INFO "scsi%ld: %s: " "No Router configured. " "Don't wait!\n", ha->host_no, __func__)); ipv6_wait = 0; } - if ((ha->ipv6_default_router_state == - IPV6_RTRSTATE_MANUAL) && - (ha->ipv6_link_local_state == - IP_ADDRSTATE_TENTATIVE) && - (memcmp(&ha->ipv6_link_local_addr, - &ha->ipv6_default_router_addr, 4) == 0)) { + if ((ha->ip_config.ipv6_default_router_state == + IPV6_RTRSTATE_MANUAL) && + (ha->ip_config.ipv6_link_local_state == + IP_ADDRSTATE_TENTATIVE) && + (memcmp(&ha->ip_config.ipv6_link_local_addr, + &ha->ip_config.ipv6_default_router_addr, 4) == + 0)) { DEBUG2(printk("scsi%ld: %s: LinkLocal Router & " "IP configured. Don't wait!\n", ha->host_no, __func__)); @@ -279,11 +256,14 @@ qla4xxx_wait_for_ip_config(struct scsi_qla_host *ha) "IP(s) \"", ha->host_no, __func__)); if (ipv4_wait) DEBUG2(printk("IPv4 ")); - if (ha->ipv6_link_local_state == IP_ADDRSTATE_ACQUIRING) + if (ha->ip_config.ipv6_link_local_state == + IP_ADDRSTATE_ACQUIRING) DEBUG2(printk("IPv6LinkLocal ")); - if (ha->ipv6_addr0_state == IP_ADDRSTATE_ACQUIRING) + if (ha->ip_config.ipv6_addr0_state == + IP_ADDRSTATE_ACQUIRING) DEBUG2(printk("IPv6Addr0 ")); - if (ha->ipv6_addr1_state == IP_ADDRSTATE_ACQUIRING) + if (ha->ip_config.ipv6_addr1_state == + IP_ADDRSTATE_ACQUIRING) DEBUG2(printk("IPv6Addr1 ")); DEBUG2(printk("\"\n")); } @@ -466,486 +446,19 @@ static int qla4xxx_init_firmware(struct scsi_qla_host *ha) return qla4xxx_get_firmware_status(ha); } -static struct ddb_entry* qla4xxx_get_ddb_entry(struct scsi_qla_host *ha, - uint32_t fw_ddb_index, - uint32_t *new_tgt) +static void qla4xxx_set_model_info(struct scsi_qla_host *ha) { - struct dev_db_entry *fw_ddb_entry = NULL; - dma_addr_t fw_ddb_entry_dma; - struct ddb_entry *ddb_entry = NULL; - int found = 0; - uint32_t device_state; - - *new_tgt = 0; - /* Make sure the dma buffer is valid */ - fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, - sizeof(*fw_ddb_entry), - &fw_ddb_entry_dma, GFP_KERNEL); - if (fw_ddb_entry == NULL) { - DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n", - ha->host_no, __func__)); - goto exit_get_ddb_entry_no_free; - } - - if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry, - fw_ddb_entry_dma, NULL, NULL, - &device_state, NULL, NULL, NULL) == - QLA_ERROR) { - DEBUG2(printk("scsi%ld: %s: failed get_ddb_entry for " - "fw_ddb_index %d\n", ha->host_no, __func__, - fw_ddb_index)); - goto exit_get_ddb_entry; - } - - /* Allocate DDB if not already allocated. */ - DEBUG2(printk("scsi%ld: %s: Looking for ddb[%d]\n", ha->host_no, - __func__, fw_ddb_index)); - list_for_each_entry(ddb_entry, &ha->ddb_list, list) { - if ((memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name, - ISCSI_NAME_SIZE) == 0) && - (ddb_entry->tpgt == - le32_to_cpu(fw_ddb_entry->tgt_portal_grp)) && - (memcmp(ddb_entry->isid, fw_ddb_entry->isid, - sizeof(ddb_entry->isid)) == 0)) { - found++; - break; - } + uint16_t board_id_string[8]; + int i; + int size = sizeof(ha->nvram->isp4022.boardIdStr); + int offset = offsetof(struct eeprom_data, isp4022.boardIdStr) / 2; + + for (i = 0; i < (size / 2) ; i++) { + board_id_string[i] = rd_nvram_word(ha, offset); + offset += 1; } - /* if not found allocate new ddb */ - if (!found) { - DEBUG2(printk("scsi%ld: %s: ddb[%d] not found - allocating " - "new ddb\n", ha->host_no, __func__, - fw_ddb_index)); - *new_tgt = 1; - ddb_entry = qla4xxx_alloc_ddb(ha, fw_ddb_index); - } - -exit_get_ddb_entry: - dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), fw_ddb_entry, - fw_ddb_entry_dma); - -exit_get_ddb_entry_no_free: - return ddb_entry; -} - -/** - * qla4xxx_update_ddb_entry - update driver's internal ddb - * @ha: pointer to host adapter structure. - * @ddb_entry: pointer to device database structure to be filled - * @fw_ddb_index: index of the ddb entry in fw ddb table - * - * This routine updates the driver's internal device database entry - * with information retrieved from the firmware's device database - * entry for the specified device. The ddb_entry->fw_ddb_index field - * must be initialized prior to calling this routine - * - **/ -static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha, - struct ddb_entry *ddb_entry, - uint32_t fw_ddb_index) -{ - struct dev_db_entry *fw_ddb_entry = NULL; - dma_addr_t fw_ddb_entry_dma; - int status = QLA_ERROR; - uint32_t conn_err; - - if (ddb_entry == NULL) { - DEBUG2(printk("scsi%ld: %s: ddb_entry is NULL\n", ha->host_no, - __func__)); - - goto exit_update_ddb_no_free; - } - - /* Make sure the dma buffer is valid */ - fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, - sizeof(*fw_ddb_entry), - &fw_ddb_entry_dma, GFP_KERNEL); - if (fw_ddb_entry == NULL) { - DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n", - ha->host_no, __func__)); - - goto exit_update_ddb_no_free; - } - - if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry, - fw_ddb_entry_dma, NULL, NULL, - &ddb_entry->fw_ddb_device_state, &conn_err, - &ddb_entry->tcp_source_port_num, - &ddb_entry->connection_id) == - QLA_ERROR) { - DEBUG2(printk("scsi%ld: %s: failed get_ddb_entry for " - "fw_ddb_index %d\n", ha->host_no, __func__, - fw_ddb_index)); - - goto exit_update_ddb; - } - - status = QLA_SUCCESS; - ddb_entry->options = le16_to_cpu(fw_ddb_entry->options); - ddb_entry->target_session_id = le16_to_cpu(fw_ddb_entry->tsid); - ddb_entry->task_mgmt_timeout = - le16_to_cpu(fw_ddb_entry->def_timeout); - ddb_entry->CmdSn = 0; - ddb_entry->exe_throttle = le16_to_cpu(fw_ddb_entry->exec_throttle); - ddb_entry->default_relogin_timeout = - le16_to_cpu(fw_ddb_entry->def_timeout); - ddb_entry->default_time2wait = le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait); - - /* Update index in case it changed */ - ddb_entry->fw_ddb_index = fw_ddb_index; - ha->fw_ddb_index_map[fw_ddb_index] = ddb_entry; - - ddb_entry->port = le16_to_cpu(fw_ddb_entry->port); - ddb_entry->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp); - memcpy(ddb_entry->isid, fw_ddb_entry->isid, sizeof(ddb_entry->isid)); - - memcpy(&ddb_entry->iscsi_name[0], &fw_ddb_entry->iscsi_name[0], - min(sizeof(ddb_entry->iscsi_name), - sizeof(fw_ddb_entry->iscsi_name))); - memcpy(&ddb_entry->iscsi_alias[0], &fw_ddb_entry->iscsi_alias[0], - min(sizeof(ddb_entry->iscsi_alias), - sizeof(fw_ddb_entry->iscsi_alias))); - memcpy(&ddb_entry->ip_addr[0], &fw_ddb_entry->ip_addr[0], - min(sizeof(ddb_entry->ip_addr), sizeof(fw_ddb_entry->ip_addr))); - - ddb_entry->iscsi_max_burst_len = fw_ddb_entry->iscsi_max_burst_len; - ddb_entry->iscsi_max_outsnd_r2t = fw_ddb_entry->iscsi_max_outsnd_r2t; - ddb_entry->iscsi_first_burst_len = fw_ddb_entry->iscsi_first_burst_len; - ddb_entry->iscsi_max_rcv_data_seg_len = - fw_ddb_entry->iscsi_max_rcv_data_seg_len; - ddb_entry->iscsi_max_snd_data_seg_len = - fw_ddb_entry->iscsi_max_snd_data_seg_len; - - if (ddb_entry->options & DDB_OPT_IPV6_DEVICE) { - memcpy(&ddb_entry->remote_ipv6_addr, - fw_ddb_entry->ip_addr, - min(sizeof(ddb_entry->remote_ipv6_addr), - sizeof(fw_ddb_entry->ip_addr))); - memcpy(&ddb_entry->link_local_ipv6_addr, - fw_ddb_entry->link_local_ipv6_addr, - min(sizeof(ddb_entry->link_local_ipv6_addr), - sizeof(fw_ddb_entry->link_local_ipv6_addr))); - - DEBUG2(ql4_printk(KERN_INFO, ha, "%s: DDB[%d] State %04x" - " ConnErr %08x IP %pI6 " - ":%04d \"%s\"\n", - __func__, fw_ddb_index, - ddb_entry->fw_ddb_device_state, - conn_err, fw_ddb_entry->ip_addr, - le16_to_cpu(fw_ddb_entry->port), - fw_ddb_entry->iscsi_name)); - } else - DEBUG2(ql4_printk(KERN_INFO, ha, "%s: DDB[%d] State %04x" - " ConnErr %08x IP %pI4 " - ":%04d \"%s\"\n", - __func__, fw_ddb_index, - ddb_entry->fw_ddb_device_state, - conn_err, fw_ddb_entry->ip_addr, - le16_to_cpu(fw_ddb_entry->port), - fw_ddb_entry->iscsi_name)); -exit_update_ddb: - if (fw_ddb_entry) - dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), - fw_ddb_entry, fw_ddb_entry_dma); - -exit_update_ddb_no_free: - return status; -} - -/** - * qla4xxx_alloc_ddb - allocate device database entry - * @ha: Pointer to host adapter structure. - * @fw_ddb_index: Firmware's device database index - * - * This routine allocates a ddb_entry, ititializes some values, and - * inserts it into the ddb list. - **/ -static struct ddb_entry * qla4xxx_alloc_ddb(struct scsi_qla_host *ha, - uint32_t fw_ddb_index) -{ - struct ddb_entry *ddb_entry; - - DEBUG2(printk("scsi%ld: %s: fw_ddb_index [%d]\n", ha->host_no, - __func__, fw_ddb_index)); - - ddb_entry = qla4xxx_alloc_sess(ha); - if (ddb_entry == NULL) { - DEBUG2(printk("scsi%ld: %s: Unable to allocate memory " - "to add fw_ddb_index [%d]\n", - ha->host_no, __func__, fw_ddb_index)); - return ddb_entry; - } - - ddb_entry->fw_ddb_index = fw_ddb_index; - atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY); - atomic_set(&ddb_entry->relogin_timer, 0); - atomic_set(&ddb_entry->relogin_retry_count, 0); - atomic_set(&ddb_entry->state, DDB_STATE_ONLINE); - list_add_tail(&ddb_entry->list, &ha->ddb_list); - ha->fw_ddb_index_map[fw_ddb_index] = ddb_entry; - ha->tot_ddbs++; - - return ddb_entry; -} - -/** - * qla4_is_relogin_allowed - Are we allowed to login? - * @ha: Pointer to host adapter structure. - * @conn_err: Last connection error associated with the ddb - * - * This routine tests the given connection error to determine if - * we are allowed to login. - **/ -int qla4_is_relogin_allowed(struct scsi_qla_host *ha, uint32_t conn_err) -{ - uint32_t err_code, login_rsp_sts_class; - int relogin = 1; - - err_code = ((conn_err & 0x00ff0000) >> 16); - login_rsp_sts_class = ((conn_err & 0x0000ff00) >> 8); - if (err_code == 0x1c || err_code == 0x06) { - DEBUG2(ql4_printk(KERN_INFO, ha, - ": conn_err=0x%08x, send target completed" - " or access denied failure\n", conn_err)); - relogin = 0; - } - if ((err_code == 0x08) && (login_rsp_sts_class == 0x02)) { - /* Login Response PDU returned an error. - Login Response Status in Error Code Detail - indicates login should not be retried.*/ - DEBUG2(ql4_printk(KERN_INFO, ha, - ": conn_err=0x%08x, do not retry relogin\n", - conn_err)); - relogin = 0; - } - - return relogin; -} - -static void qla4xxx_flush_AENS(struct scsi_qla_host *ha) -{ - unsigned long wtime; - - /* Flush the 0x8014 AEN from the firmware as a result of - * Auto connect. We are basically doing get_firmware_ddb() - * to determine whether we need to log back in or not. - * Trying to do a set ddb before we have processed 0x8014 - * will result in another set_ddb() for the same ddb. In other - * words there will be stale entries in the aen_q. - */ - wtime = jiffies + (2 * HZ); - do { - if (qla4xxx_get_firmware_state(ha) == QLA_SUCCESS) - if (ha->firmware_state & (BIT_2 | BIT_0)) - return; - - if (test_and_clear_bit(DPC_AEN, &ha->dpc_flags)) - qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); - - msleep(1000); - } while (!time_after_eq(jiffies, wtime)); -} - -/** - * qla4xxx_build_ddb_list - builds driver ddb list - * @ha: Pointer to host adapter structure. - * - * This routine searches for all valid firmware ddb entries and builds - * an internal ddb list. Ddbs that are considered valid are those with - * a device state of SESSION_ACTIVE. - * A relogin (set_ddb) is issued for DDBs that are not online. - **/ -static int qla4xxx_build_ddb_list(struct scsi_qla_host *ha) -{ - int status = QLA_ERROR; - uint32_t fw_ddb_index = 0; - uint32_t next_fw_ddb_index = 0; - uint32_t ddb_state; - uint32_t conn_err; - struct ddb_entry *ddb_entry; - struct dev_db_entry *fw_ddb_entry = NULL; - dma_addr_t fw_ddb_entry_dma; - uint32_t ipv6_device; - uint32_t new_tgt; - - qla4xxx_flush_AENS(ha); - - fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), - &fw_ddb_entry_dma, GFP_KERNEL); - if (fw_ddb_entry == NULL) { - DEBUG2(ql4_printk(KERN_INFO, ha, "%s: DMA alloc failed\n", - __func__)); - - goto exit_build_ddb_list_no_free; - } - - ql4_printk(KERN_INFO, ha, "Initializing DDBs ...\n"); - for (fw_ddb_index = 0; fw_ddb_index < MAX_DDB_ENTRIES; - fw_ddb_index = next_fw_ddb_index) { - /* First, let's see if a device exists here */ - if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry, - 0, NULL, &next_fw_ddb_index, - &ddb_state, &conn_err, - NULL, NULL) == - QLA_ERROR) { - DEBUG2(printk("scsi%ld: %s: get_ddb_entry, " - "fw_ddb_index %d failed", ha->host_no, - __func__, fw_ddb_index)); - goto exit_build_ddb_list; - } - - DEBUG2(printk("scsi%ld: %s: Getting DDB[%d] ddbstate=0x%x, " - "next_fw_ddb_index=%d.\n", ha->host_no, __func__, - fw_ddb_index, ddb_state, next_fw_ddb_index)); - - /* Issue relogin, if necessary. */ - if (ddb_state == DDB_DS_SESSION_FAILED || - ddb_state == DDB_DS_NO_CONNECTION_ACTIVE) { - /* Try and login to device */ - DEBUG2(printk("scsi%ld: %s: Login to DDB[%d]\n", - ha->host_no, __func__, fw_ddb_index)); - ipv6_device = le16_to_cpu(fw_ddb_entry->options) & - DDB_OPT_IPV6_DEVICE; - if (qla4_is_relogin_allowed(ha, conn_err) && - ((!ipv6_device && - *((uint32_t *)fw_ddb_entry->ip_addr)) - || ipv6_device)) { - qla4xxx_set_ddb_entry(ha, fw_ddb_index, 0); - if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, - NULL, 0, NULL, - &next_fw_ddb_index, - &ddb_state, &conn_err, - NULL, NULL) - == QLA_ERROR) { - DEBUG2(printk("scsi%ld: %s:" - "get_ddb_entry %d failed\n", - ha->host_no, - __func__, fw_ddb_index)); - goto exit_build_ddb_list; - } - } - } - - if (ddb_state != DDB_DS_SESSION_ACTIVE) - goto next_one; - /* - * if fw_ddb with session active state found, - * add to ddb_list - */ - DEBUG2(printk("scsi%ld: %s: DDB[%d] added to list\n", - ha->host_no, __func__, fw_ddb_index)); - - /* Add DDB to internal our ddb list. */ - ddb_entry = qla4xxx_get_ddb_entry(ha, fw_ddb_index, &new_tgt); - if (ddb_entry == NULL) { - DEBUG2(printk("scsi%ld: %s: Unable to allocate memory " - "for device at fw_ddb_index %d\n", - ha->host_no, __func__, fw_ddb_index)); - goto exit_build_ddb_list; - } - /* Fill in the device structure */ - if (qla4xxx_update_ddb_entry(ha, ddb_entry, fw_ddb_index) == - QLA_ERROR) { - ha->fw_ddb_index_map[fw_ddb_index] = - (struct ddb_entry *)INVALID_ENTRY; - - DEBUG2(printk("scsi%ld: %s: update_ddb_entry failed " - "for fw_ddb_index %d.\n", - ha->host_no, __func__, fw_ddb_index)); - goto exit_build_ddb_list; - } - -next_one: - /* We know we've reached the last device when - * next_fw_ddb_index is 0 */ - if (next_fw_ddb_index == 0) - break; - } - - status = QLA_SUCCESS; - ql4_printk(KERN_INFO, ha, "DDB list done..\n"); - -exit_build_ddb_list: - dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), fw_ddb_entry, - fw_ddb_entry_dma); - -exit_build_ddb_list_no_free: - return status; -} - -static int qla4xxx_initialize_ddb_list(struct scsi_qla_host *ha) -{ - uint16_t fw_ddb_index; - int status = QLA_SUCCESS; - - /* free the ddb list if is not empty */ - if (!list_empty(&ha->ddb_list)) - qla4xxx_free_ddb_list(ha); - - for (fw_ddb_index = 0; fw_ddb_index < MAX_DDB_ENTRIES; fw_ddb_index++) - ha->fw_ddb_index_map[fw_ddb_index] = - (struct ddb_entry *)INVALID_ENTRY; - - ha->tot_ddbs = 0; - - /* Perform device discovery and build ddb list. */ - status = qla4xxx_build_ddb_list(ha); - - return status; -} - -/** - * qla4xxx_reinitialize_ddb_list - update the driver ddb list - * @ha: pointer to host adapter structure. - * - * This routine obtains device information from the F/W database after - * firmware or adapter resets. The device table is preserved. - **/ -int qla4xxx_reinitialize_ddb_list(struct scsi_qla_host *ha) -{ - int status = QLA_SUCCESS; - struct ddb_entry *ddb_entry, *detemp; - - /* Update the device information for all devices. */ - list_for_each_entry_safe(ddb_entry, detemp, &ha->ddb_list, list) { - qla4xxx_update_ddb_entry(ha, ddb_entry, - ddb_entry->fw_ddb_index); - if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) { - atomic_set(&ddb_entry->state, DDB_STATE_ONLINE); - DEBUG2(printk ("scsi%ld: %s: ddb index [%d] marked " - "ONLINE\n", ha->host_no, __func__, - ddb_entry->fw_ddb_index)); - iscsi_unblock_session(ddb_entry->sess); - } else if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE) - qla4xxx_mark_device_missing(ha, ddb_entry); - } - return status; -} - -/** - * qla4xxx_relogin_device - re-establish session - * @ha: Pointer to host adapter structure. - * @ddb_entry: Pointer to device database entry - * - * This routine does a session relogin with the specified device. - * The ddb entry must be assigned prior to making this call. - **/ -int qla4xxx_relogin_device(struct scsi_qla_host *ha, - struct ddb_entry * ddb_entry) -{ - uint16_t relogin_timer; - - relogin_timer = max(ddb_entry->default_relogin_timeout, - (uint16_t)RELOGIN_TOV); - atomic_set(&ddb_entry->relogin_timer, relogin_timer); - - DEBUG2(printk("scsi%ld: Relogin ddb [%d]. TOV=%d\n", ha->host_no, - ddb_entry->fw_ddb_index, relogin_timer)); - - qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index, 0); - - return QLA_SUCCESS; + memcpy(ha->model_name, board_id_string, size); } static int qla4xxx_config_nvram(struct scsi_qla_host *ha) @@ -983,6 +496,12 @@ static int qla4xxx_config_nvram(struct scsi_qla_host *ha) else return QLA_ERROR; } + + if (is_qla4022(ha) || is_qla4032(ha)) + qla4xxx_set_model_info(ha); + else + strcpy(ha->model_name, "QLA4010"); + DEBUG(printk("scsi%ld: %s: Setting extHwConfig to 0xFFFF%04x\n", ha->host_no, __func__, extHwConfig.Asuint32_t)); @@ -1246,23 +765,57 @@ int qla4xxx_start_firmware(struct scsi_qla_host *ha) } return status; } - +/** + * qla4xxx_free_ddb_index - Free DDBs reserved by firmware + * @ha: pointer to adapter structure + * + * Since firmware is not running in autoconnect mode the DDB indices should + * be freed so that when login happens from user space there are free DDB + * indices available. + **/ +void qla4xxx_free_ddb_index(struct scsi_qla_host *ha) +{ + int max_ddbs; + int ret; + uint32_t idx = 0, next_idx = 0; + uint32_t state = 0, conn_err = 0; + + max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : + MAX_DEV_DB_ENTRIES; + + for (idx = 0; idx < max_ddbs; idx = next_idx) { + ret = qla4xxx_get_fwddb_entry(ha, idx, NULL, 0, NULL, + &next_idx, &state, &conn_err, + NULL, NULL); + if (ret == QLA_ERROR) { + next_idx++; + continue; + } + if (state == DDB_DS_NO_CONNECTION_ACTIVE || + state == DDB_DS_SESSION_FAILED) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "Freeing DDB index = 0x%x\n", idx)); + ret = qla4xxx_clear_ddb_entry(ha, idx); + if (ret == QLA_ERROR) + ql4_printk(KERN_ERR, ha, + "Unable to clear DDB index = " + "0x%x\n", idx); + } + if (next_idx == 0) + break; + } +} /** * qla4xxx_initialize_adapter - initiailizes hba * @ha: Pointer to host adapter structure. - * @renew_ddb_list: Indicates what to do with the adapter's ddb list - * after adapter recovery has completed. - * 0=preserve ddb list, 1=destroy and rebuild ddb list * * This routine parforms all of the steps necessary to initialize the adapter. * **/ -int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, - uint8_t renew_ddb_list) +int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int is_reset) { int status = QLA_ERROR; - int8_t ip_address[IP_ADDR_LEN] = {0} ; ha->eeprom_cmd_data = 0; @@ -1288,47 +841,9 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, if (status == QLA_ERROR) goto exit_init_hba; - /* - * FW is waiting to get an IP address from DHCP server: Skip building - * the ddb_list and wait for DHCP lease acquired aen to come in - * followed by 0x8014 aen" to trigger the tgt discovery process. - */ - if (ha->firmware_state & FW_STATE_CONFIGURING_IP) - goto exit_init_online; - - /* Skip device discovery if ip and subnet is zero */ - if (memcmp(ha->ip_address, ip_address, IP_ADDR_LEN) == 0 || - memcmp(ha->subnet_mask, ip_address, IP_ADDR_LEN) == 0) - goto exit_init_online; - - if (renew_ddb_list == PRESERVE_DDB_LIST) { - /* - * We want to preserve lun states (i.e. suspended, etc.) - * for recovery initiated by the driver. So just update - * the device states for the existing ddb_list. - */ - qla4xxx_reinitialize_ddb_list(ha); - } else if (renew_ddb_list == REBUILD_DDB_LIST) { - /* - * We want to build the ddb_list from scratch during - * driver initialization and recovery initiated by the - * INT_HBA_RESET IOCTL. - */ - status = qla4xxx_initialize_ddb_list(ha); - if (status == QLA_ERROR) { - DEBUG2(printk("%s(%ld) Error occurred during build" - "ddb list\n", __func__, ha->host_no)); - goto exit_init_hba; - } - - } - if (!ha->tot_ddbs) { - DEBUG2(printk("scsi%ld: Failed to initialize devices or none " - "present in Firmware device database\n", - ha->host_no)); - } + if (is_reset == RESET_ADAPTER) + qla4xxx_build_ddb_list(ha, is_reset); -exit_init_online: set_bit(AF_ONLINE, &ha->flags); exit_init_hba: if (is_qla8022(ha) && (status == QLA_ERROR)) { @@ -1342,59 +857,160 @@ exit_init_hba: return status; } -/** - * qla4xxx_add_device_dynamically - ddb addition due to an AEN - * @ha: Pointer to host adapter structure. - * @fw_ddb_index: Firmware's device database index - * - * This routine processes adds a device as a result of an 8014h AEN. - **/ -static void qla4xxx_add_device_dynamically(struct scsi_qla_host *ha, - uint32_t fw_ddb_index) +int qla4xxx_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + struct ddb_entry *ddb_entry, uint32_t state) { - struct ddb_entry * ddb_entry; - uint32_t new_tgt; + uint32_t old_fw_ddb_device_state; + int status = QLA_ERROR; - /* First allocate a device structure */ - ddb_entry = qla4xxx_get_ddb_entry(ha, fw_ddb_index, &new_tgt); - if (ddb_entry == NULL) { - DEBUG2(printk(KERN_WARNING - "scsi%ld: Unable to allocate memory to add " - "fw_ddb_index %d\n", ha->host_no, fw_ddb_index)); - return; - } + old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state; + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: DDB - old state = 0x%x, new state = 0x%x for " + "index [%d]\n", __func__, + ddb_entry->fw_ddb_device_state, state, fw_ddb_index)); - if (!new_tgt && (ddb_entry->fw_ddb_index != fw_ddb_index)) { - /* Target has been bound to a new fw_ddb_index */ - qla4xxx_free_ddb(ha, ddb_entry); - ddb_entry = qla4xxx_alloc_ddb(ha, fw_ddb_index); - if (ddb_entry == NULL) { - DEBUG2(printk(KERN_WARNING - "scsi%ld: Unable to allocate memory" - " to add fw_ddb_index %d\n", - ha->host_no, fw_ddb_index)); - return; + ddb_entry->fw_ddb_device_state = state; + + switch (old_fw_ddb_device_state) { + case DDB_DS_LOGIN_IN_PROCESS: + switch (state) { + case DDB_DS_SESSION_ACTIVE: + case DDB_DS_DISCOVERY: + ddb_entry->unblock_sess(ddb_entry->sess); + qla4xxx_update_session_conn_param(ha, ddb_entry); + status = QLA_SUCCESS; + break; + case DDB_DS_SESSION_FAILED: + case DDB_DS_NO_CONNECTION_ACTIVE: + iscsi_conn_login_event(ddb_entry->conn, + ISCSI_CONN_STATE_FREE); + status = QLA_SUCCESS; + break; } + break; + case DDB_DS_SESSION_ACTIVE: + switch (state) { + case DDB_DS_SESSION_FAILED: + /* + * iscsi_session failure will cause userspace to + * stop the connection which in turn would block the + * iscsi_session and start relogin + */ + iscsi_session_failure(ddb_entry->sess->dd_data, + ISCSI_ERR_CONN_FAILED); + status = QLA_SUCCESS; + break; + case DDB_DS_NO_CONNECTION_ACTIVE: + clear_bit(fw_ddb_index, ha->ddb_idx_map); + status = QLA_SUCCESS; + break; + } + break; + case DDB_DS_SESSION_FAILED: + switch (state) { + case DDB_DS_SESSION_ACTIVE: + case DDB_DS_DISCOVERY: + ddb_entry->unblock_sess(ddb_entry->sess); + qla4xxx_update_session_conn_param(ha, ddb_entry); + status = QLA_SUCCESS; + break; + case DDB_DS_SESSION_FAILED: + iscsi_session_failure(ddb_entry->sess->dd_data, + ISCSI_ERR_CONN_FAILED); + status = QLA_SUCCESS; + break; + } + break; + default: + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n", + __func__)); + break; } - if (qla4xxx_update_ddb_entry(ha, ddb_entry, fw_ddb_index) == - QLA_ERROR) { - ha->fw_ddb_index_map[fw_ddb_index] = - (struct ddb_entry *)INVALID_ENTRY; - DEBUG2(printk(KERN_WARNING - "scsi%ld: failed to add new device at index " - "[%d]\n Unable to retrieve fw ddb entry\n", - ha->host_no, fw_ddb_index)); - qla4xxx_free_ddb(ha, ddb_entry); - return; - } + return status; +} + +void qla4xxx_arm_relogin_timer(struct ddb_entry *ddb_entry) +{ + /* + * This triggers a relogin. After the relogin_timer + * expires, the relogin gets scheduled. We must wait a + * minimum amount of time since receiving an 0x8014 AEN + * with failed device_state or a logout response before + * we can issue another relogin. + * + * Firmware pads this timeout: (time2wait +1). + * Driver retry to login should be longer than F/W. + * Otherwise F/W will fail + * set_ddb() mbx cmd with 0x4005 since it still + * counting down its time2wait. + */ + atomic_set(&ddb_entry->relogin_timer, 0); + atomic_set(&ddb_entry->retry_relogin_timer, + ddb_entry->default_time2wait + 4); + +} + +int qla4xxx_flash_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + struct ddb_entry *ddb_entry, uint32_t state) +{ + uint32_t old_fw_ddb_device_state; + int status = QLA_ERROR; - if (qla4xxx_add_sess(ddb_entry)) { - DEBUG2(printk(KERN_WARNING - "scsi%ld: failed to add new device at index " - "[%d]\n Unable to add connection and session\n", - ha->host_no, fw_ddb_index)); - qla4xxx_free_ddb(ha, ddb_entry); + old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state; + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: DDB - old state = 0x%x, new state = 0x%x for " + "index [%d]\n", __func__, + ddb_entry->fw_ddb_device_state, state, fw_ddb_index)); + + ddb_entry->fw_ddb_device_state = state; + + switch (old_fw_ddb_device_state) { + case DDB_DS_LOGIN_IN_PROCESS: + case DDB_DS_NO_CONNECTION_ACTIVE: + switch (state) { + case DDB_DS_SESSION_ACTIVE: + ddb_entry->unblock_sess(ddb_entry->sess); + qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry); + status = QLA_SUCCESS; + break; + case DDB_DS_SESSION_FAILED: + iscsi_block_session(ddb_entry->sess); + if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) + qla4xxx_arm_relogin_timer(ddb_entry); + status = QLA_SUCCESS; + break; + } + break; + case DDB_DS_SESSION_ACTIVE: + switch (state) { + case DDB_DS_SESSION_FAILED: + iscsi_block_session(ddb_entry->sess); + if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) + qla4xxx_arm_relogin_timer(ddb_entry); + status = QLA_SUCCESS; + break; + } + break; + case DDB_DS_SESSION_FAILED: + switch (state) { + case DDB_DS_SESSION_ACTIVE: + ddb_entry->unblock_sess(ddb_entry->sess); + qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry); + status = QLA_SUCCESS; + break; + case DDB_DS_SESSION_FAILED: + if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) + qla4xxx_arm_relogin_timer(ddb_entry); + status = QLA_SUCCESS; + break; + } + break; + default: + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n", + __func__)); + break; } + return status; } /** @@ -1405,92 +1021,103 @@ static void qla4xxx_add_device_dynamically(struct scsi_qla_host *ha, * * This routine processes a Decive Database Changed AEN Event. **/ -int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, - uint32_t state, uint32_t conn_err) +int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, + uint32_t fw_ddb_index, + uint32_t state, uint32_t conn_err) { - struct ddb_entry * ddb_entry; + struct ddb_entry *ddb_entry; + int status = QLA_ERROR; /* check for out of range index */ if (fw_ddb_index >= MAX_DDB_ENTRIES) - return QLA_ERROR; + goto exit_ddb_event; /* Get the corresponging ddb entry */ ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index); /* Device does not currently exist in our database. */ if (ddb_entry == NULL) { - if (state == DDB_DS_SESSION_ACTIVE) - qla4xxx_add_device_dynamically(ha, fw_ddb_index); - return QLA_SUCCESS; + ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n", + __func__, fw_ddb_index); + + if (state == DDB_DS_NO_CONNECTION_ACTIVE) + clear_bit(fw_ddb_index, ha->ddb_idx_map); + + goto exit_ddb_event; } - /* Device already exists in our database. */ - DEBUG2(printk("scsi%ld: %s DDB - old state= 0x%x, new state=0x%x for " - "index [%d]\n", ha->host_no, __func__, - ddb_entry->fw_ddb_device_state, state, fw_ddb_index)); + ddb_entry->ddb_change(ha, fw_ddb_index, ddb_entry, state); - ddb_entry->fw_ddb_device_state = state; - /* Device is back online. */ - if ((ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) && - (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE)) { - atomic_set(&ddb_entry->state, DDB_STATE_ONLINE); - atomic_set(&ddb_entry->relogin_retry_count, 0); - atomic_set(&ddb_entry->relogin_timer, 0); - clear_bit(DF_RELOGIN, &ddb_entry->flags); - iscsi_unblock_session(ddb_entry->sess); - iscsi_session_event(ddb_entry->sess, - ISCSI_KEVENT_CREATE_SESSION); - /* - * Change the lun state to READY in case the lun TIMEOUT before - * the device came back. - */ - } else if (ddb_entry->fw_ddb_device_state != DDB_DS_SESSION_ACTIVE) { - /* Device went away, mark device missing */ - if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE) { - DEBUG2(ql4_printk(KERN_INFO, ha, "%s mark missing " - "ddb_entry 0x%p sess 0x%p conn 0x%p\n", - __func__, ddb_entry, - ddb_entry->sess, ddb_entry->conn)); - qla4xxx_mark_device_missing(ha, ddb_entry); - } +exit_ddb_event: + return status; +} - /* - * Relogin if device state changed to a not active state. - * However, do not relogin if a RELOGIN is in process, or - * we are not allowed to relogin to this DDB. - */ - if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_FAILED && - !test_bit(DF_RELOGIN, &ddb_entry->flags) && - qla4_is_relogin_allowed(ha, conn_err)) { - /* - * This triggers a relogin. After the relogin_timer - * expires, the relogin gets scheduled. We must wait a - * minimum amount of time since receiving an 0x8014 AEN - * with failed device_state or a logout response before - * we can issue another relogin. - */ - /* Firmware pads this timeout: (time2wait +1). - * Driver retry to login should be longer than F/W. - * Otherwise F/W will fail - * set_ddb() mbx cmd with 0x4005 since it still - * counting down its time2wait. - */ - atomic_set(&ddb_entry->relogin_timer, 0); - atomic_set(&ddb_entry->retry_relogin_timer, - ddb_entry->default_time2wait + 4); - DEBUG(printk("scsi%ld: %s: ddb[%d] " - "initiate relogin after %d seconds\n", - ha->host_no, __func__, - ddb_entry->fw_ddb_index, - ddb_entry->default_time2wait + 4)); - } else { - DEBUG(printk("scsi%ld: %s: ddb[%d] " - "relogin not initiated, state = %d, " - "ddb_entry->flags = 0x%lx\n", - ha->host_no, __func__, - ddb_entry->fw_ddb_index, - ddb_entry->fw_ddb_device_state, - ddb_entry->flags)); - } +/** + * qla4xxx_login_flash_ddb - Login to target (DDB) + * @cls_session: Pointer to the session to login + * + * This routine logins to the target. + * Issues setddb and conn open mbx + **/ +void qla4xxx_login_flash_ddb(struct iscsi_cls_session *cls_session) +{ + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + struct scsi_qla_host *ha; + struct dev_db_entry *fw_ddb_entry = NULL; + dma_addr_t fw_ddb_dma; + uint32_t mbx_sts = 0; + int ret; + + sess = cls_session->dd_data; + ddb_entry = sess->dd_data; + ha = ddb_entry->ha; + + if (!test_bit(AF_LINK_UP, &ha->flags)) + return; + + if (ddb_entry->ddb_type != FLASH_DDB) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "Skipping login to non FLASH DB")); + goto exit_login; } - return QLA_SUCCESS; + + fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL, + &fw_ddb_dma); + if (fw_ddb_entry == NULL) { + DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n")); + goto exit_login; + } + + if (ddb_entry->fw_ddb_index == INVALID_ENTRY) { + ret = qla4xxx_get_ddb_index(ha, &ddb_entry->fw_ddb_index); + if (ret == QLA_ERROR) + goto exit_login; + + ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = ddb_entry; + ha->tot_ddbs++; + } + + memcpy(fw_ddb_entry, &ddb_entry->fw_ddb_entry, + sizeof(struct dev_db_entry)); + ddb_entry->sess->target_id = ddb_entry->fw_ddb_index; + + ret = qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index, + fw_ddb_dma, &mbx_sts); + if (ret == QLA_ERROR) { + DEBUG2(ql4_printk(KERN_ERR, ha, "Set DDB failed\n")); + goto exit_login; + } + + ddb_entry->fw_ddb_device_state = DDB_DS_LOGIN_IN_PROCESS; + ret = qla4xxx_conn_open(ha, ddb_entry->fw_ddb_index); + if (ret == QLA_ERROR) { + ql4_printk(KERN_ERR, ha, "%s: Login failed: %s\n", __func__, + sess->targetname); + goto exit_login; + } + +exit_login: + if (fw_ddb_entry) + dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma); } + |