aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/Kconfig10
-rw-r--r--drivers/scsi/aic94xx/aic94xx_task.c4
-rw-r--r--drivers/scsi/esp_scsi.c3
-rw-r--r--drivers/scsi/ipr.c19
-rw-r--r--drivers/scsi/libiscsi.c65
-rw-r--r--drivers/scsi/libsas/sas_ata.c11
-rw-r--r--drivers/scsi/megaraid.c8
-rw-r--r--drivers/scsi/scsi_lib.c21
-rw-r--r--drivers/scsi/scsi_netlink.c27
-rw-r--r--drivers/scsi/scsi_sysfs.c9
-rw-r--r--drivers/scsi/scsi_transport_iscsi.c84
-rw-r--r--drivers/scsi/scsi_transport_spi.c28
12 files changed, 153 insertions, 136 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index de6a641..30905ce 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -388,6 +388,7 @@ config SCSI_3W_9XXX
config SCSI_7000FASST
tristate "7000FASST SCSI support"
depends on ISA && SCSI && ISA_DMA_API
+ select CHECK_SIGNATURE
help
This driver supports the Western Digital 7000 SCSI host adapter
family. Some information is in the source:
@@ -409,6 +410,7 @@ config SCSI_AHA152X
tristate "Adaptec AHA152X/2825 support"
depends on ISA && SCSI && !64BIT
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
---help---
This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
@@ -616,6 +618,7 @@ config SCSI_DTC3280
tristate "DTC3180/3280 SCSI support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
help
This is support for DTC 3180/3280 SCSI Host Adapters. Please read
the SCSI-HOWTO, available from
@@ -690,6 +693,7 @@ config SCSI_EATA_PIO
config SCSI_FUTURE_DOMAIN
tristate "Future Domain 16xx SCSI/AHA-2920A support"
depends on (ISA || PCI) && SCSI
+ select CHECK_SIGNATURE
---help---
This is support for Future Domain's 16-bit SCSI host adapters
(TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
@@ -1358,6 +1362,7 @@ config SCSI_LPFC
config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
depends on X86 && ISA && SCSI
+ select CHECK_SIGNATURE
---help---
These are 8-bit SCSI controllers; the ST-01 is also supported by
this driver. It is explained in section 3.9 of the SCSI-HOWTO,
@@ -1431,6 +1436,7 @@ config SCSI_T128
tristate "Trantor T128/T128F/T228 SCSI support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
---help---
This is support for a SCSI host adapter. It is explained in section
3.11 of the SCSI-HOWTO, available from
@@ -1595,7 +1601,7 @@ config A3000_SCSI
built-in SCSI controller, say Y. Otherwise, say N.
To compile this driver as a module, choose M here: the
- module will be called wd33c93.
+ module will be called a3000.
config A2091_SCSI
tristate "A2091/A590 WD33C93A support"
@@ -1605,7 +1611,7 @@ config A2091_SCSI
say N.
To compile this driver as a module, choose M here: the
- module will be called wd33c93.
+ module will be called a2091.
config GVP11_SCSI
tristate "GVP Series II WD33C93A support"
diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c
index 4c759ce..f2b23e0 100644
--- a/drivers/scsi/aic94xx/aic94xx_task.c
+++ b/drivers/scsi/aic94xx/aic94xx_task.c
@@ -451,7 +451,7 @@ static int asd_build_smp_ascb(struct asd_ascb *ascb, struct sas_task *task,
struct scb *scb;
pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_req, 1,
- PCI_DMA_FROMDEVICE);
+ PCI_DMA_TODEVICE);
pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_resp, 1,
PCI_DMA_FROMDEVICE);
@@ -486,7 +486,7 @@ static void asd_unbuild_smp_ascb(struct asd_ascb *a)
BUG_ON(!task);
pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_req, 1,
- PCI_DMA_FROMDEVICE);
+ PCI_DMA_TODEVICE);
pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_resp, 1,
PCI_DMA_FROMDEVICE);
}
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index f346fd1..4ed3a52 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -2314,6 +2314,7 @@ int scsi_esp_register(struct esp *esp, struct device *dev)
esp->host->transportt = esp_transport_template;
esp->host->max_lun = ESP_MAX_LUN;
esp->host->cmd_per_lun = 2;
+ esp->host->unique_id = instance;
esp_set_clock_params(esp);
@@ -2337,7 +2338,7 @@ int scsi_esp_register(struct esp *esp, struct device *dev)
if (err)
return err;
- esp->host->unique_id = instance++;
+ instance++;
scsi_scan_host(esp->host);
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index f142eaf..b41dfb5 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -3829,18 +3829,18 @@ static int ipr_device_reset(struct ipr_ioa_cfg *ioa_cfg,
/**
* ipr_sata_reset - Reset the SATA port
- * @ap: SATA port to reset
+ * @link: SATA link to reset
* @classes: class of the attached device
*
- * This function issues a SATA phy reset to the affected ATA port.
+ * This function issues a SATA phy reset to the affected ATA link.
*
* Return value:
* 0 on success / non-zero on failure
**/
-static int ipr_sata_reset(struct ata_port *ap, unsigned int *classes,
+static int ipr_sata_reset(struct ata_link *link, unsigned int *classes,
unsigned long deadline)
{
- struct ipr_sata_port *sata_port = ap->private_data;
+ struct ipr_sata_port *sata_port = link->ap->private_data;
struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;
struct ipr_resource_entry *res;
unsigned long lock_flags = 0;
@@ -4981,22 +4981,22 @@ static void ipr_ata_phy_reset(struct ata_port *ap)
rc = ipr_device_reset(ioa_cfg, res);
if (rc) {
- ap->ops->port_disable(ap);
+ ata_port_disable(ap);
goto out_unlock;
}
switch(res->cfgte.proto) {
case IPR_PROTO_SATA:
case IPR_PROTO_SAS_STP:
- ap->device[0].class = ATA_DEV_ATA;
+ ap->link.device[0].class = ATA_DEV_ATA;
break;
case IPR_PROTO_SATA_ATAPI:
case IPR_PROTO_SAS_STP_ATAPI:
- ap->device[0].class = ATA_DEV_ATAPI;
+ ap->link.device[0].class = ATA_DEV_ATAPI;
break;
default:
- ap->device[0].class = ATA_DEV_UNKNOWN;
- ap->ops->port_disable(ap);
+ ap->link.device[0].class = ATA_DEV_UNKNOWN;
+ ata_port_disable(ap);
break;
};
@@ -5262,7 +5262,6 @@ static u8 ipr_ata_check_altstatus(struct ata_port *ap)
}
static struct ata_port_operations ipr_sata_ops = {
- .port_disable = ata_port_disable,
.check_status = ipr_ata_check_status,
.check_altstatus = ipr_ata_check_altstatus,
.dev_select = ata_noop_dev_select,
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 5606d1e..efceed4 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -737,12 +737,19 @@ check_mgmt:
*/
conn->ctask = list_entry(conn->xmitqueue.next,
struct iscsi_cmd_task, running);
- if (conn->ctask->state == ISCSI_TASK_PENDING) {
+ switch (conn->ctask->state) {
+ case ISCSI_TASK_ABORTING:
+ break;
+ case ISCSI_TASK_PENDING:
iscsi_prep_scsi_cmd_pdu(conn->ctask);
conn->session->tt->init_cmd_task(conn->ctask);
+ /* fall through */
+ default:
+ conn->ctask->state = ISCSI_TASK_RUNNING;
+ break;
}
- conn->ctask->state = ISCSI_TASK_RUNNING;
list_move_tail(conn->xmitqueue.next, &conn->run_list);
+
rc = iscsi_xmit_ctask(conn);
if (rc)
goto again;
@@ -1049,7 +1056,9 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc,
ctask->mtask = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)hdr,
NULL, 0);
if (!ctask->mtask) {
+ spin_unlock_bh(&session->lock);
iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+ spin_lock_bh(&session->lock)
debug_scsi("abort sent failure [itt 0x%x]\n", ctask->itt);
return -EPERM;
}
@@ -1066,6 +1075,7 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc,
debug_scsi("abort set timeout [itt 0x%x]\n", ctask->itt);
}
spin_unlock_bh(&session->lock);
+ mutex_unlock(&session->eh_mutex);
scsi_queue_work(session->host, &conn->xmitwork);
/*
@@ -1083,6 +1093,7 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc,
if (signal_pending(current))
flush_signals(current);
del_timer_sync(&conn->tmabort_timer);
+ mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->lock);
return 0;
}
@@ -1158,31 +1169,45 @@ static void fail_command(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask,
__iscsi_put_ctask(ctask);
}
+static void iscsi_suspend_tx(struct iscsi_conn *conn)
+{
+ set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
+ scsi_flush_work(conn->session->host);
+}
+
+static void iscsi_start_tx(struct iscsi_conn *conn)
+{
+ clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
+ scsi_queue_work(conn->session->host, &conn->xmitwork);
+}
+
int iscsi_eh_abort(struct scsi_cmnd *sc)
{
+ struct Scsi_Host *host = sc->device->host;
+ struct iscsi_session *session = iscsi_hostdata(host->hostdata);
struct iscsi_cmd_task *ctask;
struct iscsi_conn *conn;
- struct iscsi_session *session;
int rc;
+ mutex_lock(&session->eh_mutex);
+ spin_lock_bh(&session->lock);
/*
* if session was ISCSI_STATE_IN_RECOVERY then we may not have
* got the command.
*/
if (!sc->SCp.ptr) {
debug_scsi("sc never reached iscsi layer or it completed.\n");
+ spin_unlock_bh(&session->lock);
+ mutex_unlock(&session->eh_mutex);
return SUCCESS;
}
ctask = (struct iscsi_cmd_task *)sc->SCp.ptr;
conn = ctask->conn;
- session = conn->session;
conn->eh_abort_cnt++;
debug_scsi("aborting [sc %p itt 0x%x]\n", sc, ctask->itt);
- spin_lock_bh(&session->lock);
-
/*
* If we are not logged in or we have started a new session
* then let the host reset code handle this
@@ -1219,6 +1244,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
switch (conn->tmabort_state) {
case TMABORT_SUCCESS:
spin_unlock_bh(&session->lock);
+ iscsi_suspend_tx(conn);
/*
* clean up task if aborted. grab the recv lock as a writer
*/
@@ -1227,11 +1253,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
fail_command(conn, ctask, DID_ABORT << 16);
spin_unlock(&session->lock);
write_unlock_bh(conn->recv_lock);
- /*
- * make sure xmit thread is not still touching the
- * ctask/scsi_cmnd
- */
- scsi_flush_work(session->host);
+ iscsi_start_tx(conn);
goto success_unlocked;
case TMABORT_NOT_FOUND:
if (!ctask->sc) {
@@ -1251,12 +1273,14 @@ success:
spin_unlock_bh(&session->lock);
success_unlocked:
debug_scsi("abort success [sc %lx itt 0x%x]\n", (long)sc, ctask->itt);
+ mutex_unlock(&session->eh_mutex);
return SUCCESS;
failed:
spin_unlock_bh(&session->lock);
failed_unlocked:
debug_scsi("abort failed [sc %lx itt 0x%x]\n", (long)sc, ctask->itt);
+ mutex_unlock(&session->eh_mutex);
return FAILED;
}
EXPORT_SYMBOL_GPL(iscsi_eh_abort);
@@ -1403,6 +1427,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit,
session->max_cmdsn = initial_cmdsn + 1;
session->max_r2t = 1;
session->tt = iscsit;
+ mutex_init(&session->eh_mutex);
/* initialize SCSI PDU commands pool */
if (iscsi_pool_init(&session->cmdpool, session->cmds_max,
@@ -1736,9 +1761,22 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
{
int old_stop_stage;
+ mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->lock);
if (conn->stop_stage == STOP_CONN_TERM) {
spin_unlock_bh(&session->lock);
+ mutex_unlock(&session->eh_mutex);
+ return;
+ }
+
+ /*
+ * The LLD either freed/unset the lock on us, or userspace called
+ * stop but did not create a proper connection (connection was never
+ * bound or it was unbound then stop was called).
+ */
+ if (!conn->recv_lock) {
+ spin_unlock_bh(&session->lock);
+ mutex_unlock(&session->eh_mutex);
return;
}
@@ -1755,9 +1793,9 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
old_stop_stage = conn->stop_stage;
conn->stop_stage = flag;
conn->c_stage = ISCSI_CONN_STOPPED;
- set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
spin_unlock_bh(&session->lock);
- scsi_flush_work(session->host);
+
+ iscsi_suspend_tx(conn);
write_lock_bh(conn->recv_lock);
set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
@@ -1786,6 +1824,7 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
fail_all_commands(conn);
flush_control_queues(session, conn);
spin_unlock_bh(&session->lock);
+ mutex_unlock(&session->eh_mutex);
}
void iscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 5e573ef..0829b55 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -249,17 +249,17 @@ static void sas_ata_phy_reset(struct ata_port *ap)
switch (dev->sata_dev.command_set) {
case ATA_COMMAND_SET:
SAS_DPRINTK("%s: Found ATA device.\n", __FUNCTION__);
- ap->device[0].class = ATA_DEV_ATA;
+ ap->link.device[0].class = ATA_DEV_ATA;
break;
case ATAPI_COMMAND_SET:
SAS_DPRINTK("%s: Found ATAPI device.\n", __FUNCTION__);
- ap->device[0].class = ATA_DEV_ATAPI;
+ ap->link.device[0].class = ATA_DEV_ATAPI;
break;
default:
SAS_DPRINTK("%s: Unknown SATA command set: %d.\n",
__FUNCTION__,
dev->sata_dev.command_set);
- ap->device[0].class = ATA_DEV_UNKNOWN;
+ ap->link.device[0].class = ATA_DEV_UNKNOWN;
break;
}
@@ -317,7 +317,7 @@ static int sas_ata_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
dev->sata_dev.serror = val;
break;
case SCR_ACTIVE:
- dev->sata_dev.ap->sactive = val;
+ dev->sata_dev.ap->link.sactive = val;
break;
default:
return -EINVAL;
@@ -342,7 +342,7 @@ static int sas_ata_scr_read(struct ata_port *ap, unsigned int sc_reg_in,
*val = dev->sata_dev.serror;
return 0;
case SCR_ACTIVE:
- *val = dev->sata_dev.ap->sactive;
+ *val = dev->sata_dev.ap->link.sactive;
return 0;
default:
return -EINVAL;
@@ -350,7 +350,6 @@ static int sas_ata_scr_read(struct ata_port *ap, unsigned int sc_reg_in,
}
static struct ata_port_operations sas_sata_ops = {
- .port_disable = ata_port_disable,
.check_status = sas_ata_check_status,
.check_altstatus = sas_ata_check_status,
.dev_select = ata_noop_dev_select,
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 9023ec6..e7e11f2 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -1753,6 +1753,14 @@ mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len)
*len = 0;
+ if (scsi_sg_count(cmd) == 1 && !adapter->has_64bit_addr) {
+ sg = scsi_sglist(cmd);
+ scb->dma_h_bulkdata = sg_dma_address(sg);
+ *buf = (u32)scb->dma_h_bulkdata;
+ *len = sg_dma_len(sg);
+ return 0;
+ }
+
scsi_for_each_sg(cmd, sg, sgcnt, idx) {
if (adapter->has_64bit_addr) {
scb->sgl64[idx].address = sg_dma_address(sg);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index fac3429..207f1aa 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -263,25 +263,12 @@ static int scsi_merge_bio(struct request *rq, struct bio *bio)
bio->bi_rw |= (1 << BIO_RW);
blk_queue_bounce(q, &bio);
- if (!rq->bio)
- blk_rq_bio_prep(q, rq, bio);
- else if (!ll_back_merge_fn(q, rq, bio))
- return -EINVAL;
- else {
- rq->biotail->bi_next = bio;
- rq->biotail = bio;
- }
-
- return 0;
+ return blk_rq_append_bio(q, rq, bio);
}
-static int scsi_bi_endio(struct bio *bio, unsigned int bytes_done, int error)
+static void scsi_bi_endio(struct bio *bio, int error)
{
- if (bio->bi_size)
- return 1;
-
bio_put(bio);
- return 0;
}
/**
@@ -342,7 +329,7 @@ static int scsi_req_map_sg(struct request *rq, struct scatterlist *sgl,
if (bio->bi_vcnt >= nr_vecs) {
err = scsi_merge_bio(rq, bio);
if (err) {
- bio_endio(bio, bio->bi_size, 0);
+ bio_endio(bio, 0);
goto free_bios;
}
bio = NULL;
@@ -365,7 +352,7 @@ free_bios:
/*
* call endio instead of bio_put incase it was bounced
*/
- bio_endio(bio, bio->bi_size, 0);
+ bio_endio(bio, 0);
}
return err;
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index 4bf9aa5..40579ed 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -64,7 +64,7 @@ scsi_nl_rcv_msg(struct sk_buff *skb)
if (nlh->nlmsg_type != SCSI_TRANSPORT_MSG) {
err = -EBADMSG;
- goto next_msg;
+ return;
}
hdr = NLMSG_DATA(nlh);
@@ -99,27 +99,6 @@ next_msg:
/**
- * scsi_nl_rcv_msg -
- * Receive handler for a socket. Extracts a received message buffer from
- * the socket, and starts message processing.
- *
- * @sk: socket
- * @len: unused
- *
- **/
-static void
-scsi_nl_rcv(struct sock *sk, int len)
-{
- struct sk_buff *skb;
-
- while ((skb = skb_dequeue(&sk->sk_receive_queue))) {
- scsi_nl_rcv_msg(skb);
- kfree_skb(skb);
- }
-}
-
-
-/**
* scsi_nl_rcv_event -
* Event handler for a netlink socket.
*
@@ -167,8 +146,8 @@ scsi_netlink_init(void)
return;
}
- scsi_nl_sock = netlink_kernel_create(NETLINK_SCSITRANSPORT,
- SCSI_NL_GRP_CNT, scsi_nl_rcv, NULL,
+ scsi_nl_sock = netlink_kernel_create(&init_net, NETLINK_SCSITRANSPORT,
+ SCSI_NL_GRP_CNT, scsi_nl_rcv_msg, NULL,
THIS_MODULE);
if (!scsi_nl_sock) {
printk(KERN_ERR "%s: register of recieve handler failed\n",
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 8e880ef..daed37d 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -319,16 +319,11 @@ static int scsi_bus_match(struct device *dev, struct device_driver *gendrv)
return (sdp->inq_periph_qual == SCSI_INQ_PQ_CON)? 1: 0;
}
-static int scsi_bus_uevent(struct device *dev, char **envp, int num_envp,
- char *buffer, int buffer_size)
+static int scsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct scsi_device *sdev = to_scsi_device(dev);
- int i = 0;
- int length = 0;
- add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
- "MODALIAS=" SCSI_DEVICE_MODALIAS_FMT, sdev->type);
- envp[i] = NULL;
+ add_uevent_var(env, "MODALIAS=" SCSI_DEVICE_MODALIAS_FMT, sdev->type);
return 0;
}
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 34c1860..5428d15 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -1097,61 +1097,49 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
}
/*
- * Get message from skb (based on rtnetlink_rcv_skb). Each message is
- * processed by iscsi_if_recv_msg. Malformed skbs with wrong lengths or
- * invalid creds are discarded silently.
+ * Get message from skb. Each message is processed by iscsi_if_recv_msg.
+ * Malformed skbs with wrong lengths or invalid creds are not processed.
*/
static void
-iscsi_if_rx(struct sock *sk, int len)
+iscsi_if_rx(struct sk_buff *skb)
{
- struct sk_buff *skb;
-
mutex_lock(&rx_queue_mutex);
- while ((skb = skb_dequeue(&sk->sk_receive_queue)) != NULL) {
- if (NETLINK_CREDS(skb)->uid) {
- skb_pull(skb, skb->len);
- goto free_skb;
+ while (skb->len >= NLMSG_SPACE(0)) {
+ int err;
+ uint32_t rlen;
+ struct nlmsghdr *nlh;
+ struct iscsi_uevent *ev;
+
+ nlh = nlmsg_hdr(skb);
+ if (nlh->nlmsg_len < sizeof(*nlh) ||
+ skb->len < nlh->nlmsg_len) {
+ break;
}
- while (skb->len >= NLMSG_SPACE(0)) {
- int err;
- uint32_t rlen;
- struct nlmsghdr *nlh;
- struct iscsi_uevent *ev;
+ ev = NLMSG_DATA(nlh);
+ rlen = NLMSG_ALIGN(nlh->nlmsg_len);
+ if (rlen > skb->len)
+ rlen = skb->len;
- nlh = nlmsg_hdr(skb);
- if (nlh->nlmsg_len < sizeof(*nlh) ||
- skb->len < nlh->nlmsg_len) {
- break;
- }
-
- ev = NLMSG_DATA(nlh);
- rlen = NLMSG_ALIGN(nlh->nlmsg_len);
- if (rlen > skb->len)
- rlen = skb->len;
-
- err = iscsi_if_recv_msg(skb, nlh);
- if (err) {
- ev->type = ISCSI_KEVENT_IF_ERROR;
- ev->iferror = err;
- }
- do {
- /*
- * special case for GET_STATS:
- * on success - sending reply and stats from
- * inside of if_recv_msg(),
- * on error - fall through.
- */
- if (ev->type == ISCSI_UEVENT_GET_STATS && !err)
- break;
- err = iscsi_if_send_reply(
- NETLINK_CREDS(skb)->pid, nlh->nlmsg_seq,
- nlh->nlmsg_type, 0, 0, ev, sizeof(*ev));
- } while (err < 0 && err != -ECONNREFUSED);
- skb_pull(skb, rlen);
+ err = iscsi_if_recv_msg(skb, nlh);
+ if (err) {
+ ev->type = ISCSI_KEVENT_IF_ERROR;
+ ev->iferror = err;
}
-free_skb:
- kfree_skb(skb);
+ do {
+ /*
+ * special case for GET_STATS:
+ * on success - sending reply and stats from
+ * inside of if_recv_msg(),
+ * on error - fall through.
+ */
+ if (ev->type == ISCSI_UEVENT_GET_STATS && !err)
+ break;
+ err = iscsi_if_send_reply(
+ NETLINK_CREDS(skb)->pid, nlh->nlmsg_seq,
+ nlh->nlmsg_type, 0, 0, ev, sizeof(*ev));
+ } while (err < 0 && err != -ECONNREFUSED);
+ skb_pull(skb, rlen);
}
mutex_unlock(&rx_queue_mutex);
}
@@ -1523,7 +1511,7 @@ static __init int iscsi_transport_init(void)
if (err)
goto unregister_conn_class;
- nls = netlink_kernel_create(NETLINK_ISCSI, 1, iscsi_if_rx, NULL,
+ nls = netlink_kernel_create(&init_net, NETLINK_ISCSI, 1, iscsi_if_rx, NULL,
THIS_MODULE);
if (!nls) {
err = -ENOBUFS;
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 6f56f87..4df21c9 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -787,10 +787,12 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
struct scsi_target *starget = sdev->sdev_target;
struct Scsi_Host *shost = sdev->host;
int len = sdev->inquiry_len;
+ int min_period = spi_min_period(starget);
+ int max_width = spi_max_width(starget);
/* first set us up for narrow async */
DV_SET(offset, 0);
DV_SET(width, 0);
-
+
if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS)
!= SPI_COMPARE_SUCCESS) {
starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n");
@@ -798,9 +800,13 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
return;
}
+ if (!scsi_device_wide(sdev)) {
+ spi_max_width(starget) = 0;
+ max_width = 0;
+ }
+
/* test width */
- if (i->f->set_width && spi_max_width(starget) &&
- scsi_device_wide(sdev)) {
+ if (i->f->set_width && max_width) {
i->f->set_width(starget, 1);
if (spi_dv_device_compare_inquiry(sdev, buffer,
@@ -809,6 +815,11 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
!= SPI_COMPARE_SUCCESS) {
starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n");
i->f->set_width(starget, 0);
+ /* Make sure we don't force wide back on by asking
+ * for a transfer period that requires it */
+ max_width = 0;
+ if (min_period < 10)
+ min_period = 10;
}
}
@@ -828,7 +839,8 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
/* now set up to the maximum */
DV_SET(offset, spi_max_offset(starget));
- DV_SET(period, spi_min_period(starget));
+ DV_SET(period, min_period);
+
/* try QAS requests; this should be harmless to set if the
* target supports it */
if (scsi_device_qas(sdev)) {
@@ -837,14 +849,14 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
DV_SET(qas, 0);
}
- if (scsi_device_ius(sdev) && spi_min_period(starget) < 9) {
+ if (scsi_device_ius(sdev) && min_period < 9) {
/* This u320 (or u640). Set IU transfers */
DV_SET(iu, 1);
/* Then set the optional parameters */
DV_SET(rd_strm, 1);
DV_SET(wr_flow, 1);
DV_SET(rti, 1);
- if (spi_min_period(starget) == 8)
+ if (min_period == 8)
DV_SET(pcomp_en, 1);
} else {
DV_SET(iu, 0);
@@ -862,6 +874,10 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
} else {
DV_SET(dt, 1);
}
+ /* set width last because it will pull all the other
+ * parameters down to required values */
+ DV_SET(width, max_width);
+
/* Do the read only INQUIRY tests */
spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len,
spi_dv_device_compare_inquiry);
generated by cgit v1.1 at 2024-10-30 19:19:09 +0000