aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/Kconfig7
-rw-r--r--drivers/serial/amba-pl010.c9
-rw-r--r--drivers/serial/ioc3_serial.c5
-rw-r--r--drivers/serial/mfd.c18
-rw-r--r--drivers/serial/mpc52xx_uart.c1
-rw-r--r--drivers/serial/mrst_max3110.c1
-rw-r--r--drivers/serial/samsung.c2
-rw-r--r--drivers/serial/serial_cs.c261
8 files changed, 134 insertions, 170 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 12900f7..3198c53 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -458,6 +458,7 @@ config SERIAL_SAMSUNG_UARTS
int
depends on ARM && PLAT_SAMSUNG
default 2 if ARCH_S3C2400
+ default 6 if ARCH_S5P6450
default 4 if SERIAL_SAMSUNG_UARTS_4
default 3
help
@@ -526,12 +527,12 @@ config SERIAL_S3C24A0
Serial port support for the Samsung S3C24A0 SoC
config SERIAL_S3C6400
- tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100)
+ tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support"
+ depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100)
select SERIAL_SAMSUNG_UARTS_4
default y
help
- Serial port support for the Samsung S3C6400, S3C6410, S5P6440
+ Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450
and S5PC100 SoCs
config SERIAL_S5PV210
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 50441ff..2904aa0 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -472,14 +472,9 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
spin_unlock_irqrestore(&uap->port.lock, flags);
}
-static void pl010_set_ldisc(struct uart_port *port)
+static void pl010_set_ldisc(struct uart_port *port, int new)
{
- int line = port->line;
-
- if (line >= port->state->port.tty->driver->num)
- return;
-
- if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+ if (new == N_PPS) {
port->flags |= UPF_HARDPPS_CD;
pl010_enable_ms(port);
} else
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index 93de907..ee43efc 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -2017,6 +2017,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
struct ioc3_port *port;
struct ioc3_port *ports[PORTS_PER_CARD];
int phys_port;
+ int cnt;
DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, is, idd));
@@ -2044,6 +2045,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
if (!port) {
printk(KERN_WARNING
"IOC3 serial memory not available for port\n");
+ ret = -ENOMEM;
goto out4;
}
spin_lock_init(&port->ip_lock);
@@ -2146,6 +2148,9 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
/* error exits that give back resources */
out4:
+ for (cnt = 0; cnt < phys_port; cnt++)
+ kfree(ports[cnt]);
+
kfree(card_ptr);
return ret;
}
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index 6703f3e..dc0967f 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -27,6 +27,7 @@
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
+#include <linux/slab.h>
#include <linux/serial_reg.h>
#include <linux/circ_buf.h>
#include <linux/delay.h>
@@ -1425,7 +1426,6 @@ static void hsu_global_init(void)
}
phsu = hsu;
-
hsu_debugfs_init(hsu);
return;
@@ -1437,18 +1437,20 @@ err_free_region:
static void serial_hsu_remove(struct pci_dev *pdev)
{
- struct hsu_port *hsu;
- int i;
+ void *priv = pci_get_drvdata(pdev);
+ struct uart_hsu_port *up;
- hsu = pci_get_drvdata(pdev);
- if (!hsu)
+ if (!priv)
return;
- for (i = 0; i < 3; i++)
- uart_remove_one_port(&serial_hsu_reg, &hsu->port[i].port);
+ /* For port 0/1/2, priv is the address of uart_hsu_port */
+ if (pdev->device != 0x081E) {
+ up = priv;
+ uart_remove_one_port(&serial_hsu_reg, &up->port);
+ }
pci_set_drvdata(pdev, NULL);
- free_irq(hsu->irq, hsu);
+ free_irq(pdev->irq, priv);
pci_disable_device(pdev);
}
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 8dedb26..c4399e2 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -500,6 +500,7 @@ static int __init mpc512x_psc_fifoc_init(void)
psc_fifoc = of_iomap(np, 0);
if (!psc_fifoc) {
pr_err("%s: Can't map FIFOC\n", __func__);
+ of_node_put(np);
return -ENODEV;
}
diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c
index f6ad1ec..51c15f5 100644
--- a/drivers/serial/mrst_max3110.c
+++ b/drivers/serial/mrst_max3110.c
@@ -29,6 +29,7 @@
#include <linux/module.h>
#include <linux/ioport.h>
+#include <linux/irq.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index b1156ba..7ac2bf5 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1101,7 +1101,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
port->mapbase = res->start;
- port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000);
+ port->membase = S3C_VA_UART + (res->start & 0xfffff);
ret = platform_get_irq(platdev, 0);
if (ret < 0)
port->irq = 0;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 141c695..93760b2 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -45,7 +45,6 @@
#include <asm/io.h>
#include <asm/system.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>
@@ -183,10 +182,8 @@ static void quirk_config_socket(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
- if (info->multi) {
- link->conf.Present |= PRESENT_EXT_STATUS;
- link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
- }
+ if (info->multi)
+ link->config_flags |= CONF_ENABLE_ESR;
}
static const struct serial_quirk quirks[] = {
@@ -265,13 +262,6 @@ static const struct serial_quirk quirks[] = {
static int serial_config(struct pcmcia_device * link);
-/*======================================================================
-
- After a card is removed, serial_remove() will unregister
- the serial device(s), and release the PCMCIA configuration.
-
-======================================================================*/
-
static void serial_remove(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
@@ -314,14 +304,6 @@ static int serial_resume(struct pcmcia_device *link)
return 0;
}
-/*======================================================================
-
- serial_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int serial_probe(struct pcmcia_device *link)
{
struct serial_info *info;
@@ -335,27 +317,13 @@ static int serial_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- link->resource[0]->end = 8;
- link->conf.Attributes = CONF_ENABLE_IRQ;
- if (do_sound) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
- link->conf.IntType = INT_MEMORY_AND_IO;
+ link->config_flags |= CONF_ENABLE_IRQ;
+ if (do_sound)
+ link->config_flags |= CONF_ENABLE_SPKR;
return serial_config(link);
}
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void serial_detach(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
@@ -363,11 +331,6 @@ static void serial_detach(struct pcmcia_device *link)
dev_dbg(&link->dev, "serial_detach\n");
/*
- * Ensure any outstanding scheduled tasks are completed.
- */
- flush_scheduled_work();
-
- /*
* Ensure that the ports have been released.
*/
serial_remove(link);
@@ -411,47 +374,66 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
/*====================================================================*/
-static int simple_config_check(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
+static int pfc_config(struct pcmcia_device *p_dev)
+{
+ unsigned int port = 0;
+ struct serial_info *info = p_dev->priv;
+
+ if ((p_dev->resource[1]->end != 0) &&
+ (resource_size(p_dev->resource[1]) == 8)) {
+ port = p_dev->resource[1]->start;
+ info->slave = 1;
+ } else if ((info->manfid == MANFID_OSITECH) &&
+ (resource_size(p_dev->resource[0]) == 0x40)) {
+ port = p_dev->resource[0]->start + 0x28;
+ info->slave = 1;
+ }
+ if (info->slave)
+ return setup_serial(p_dev, info, port, p_dev->irq);
+
+ dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
+ return -ENODEV;
+}
+
+static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
static const int size_table[2] = { 8, 16 };
int *try = priv_data;
- if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
- p_dev->conf.Vpp =
- cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ if (p_dev->resource[0]->start == 0)
+ return -ENODEV;
- p_dev->io_lines = ((*try & 0x1) == 0) ?
- 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+ if ((*try & 0x1) == 0)
+ p_dev->io_lines = 16;
- if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
- && (cf->io.win[0].base != 0)) {
- p_dev->resource[0]->start = cf->io.win[0].base;
- if (!pcmcia_request_io(p_dev))
- return 0;
- }
- return -EINVAL;
+ if (p_dev->resource[0]->end != size_table[(*try >> 1)])
+ return -ENODEV;
+
+ p_dev->resource[0]->end = 8;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+
+ return pcmcia_request_io(p_dev);
}
static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
void *priv_data)
{
static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
int j;
- if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- for (j = 0; j < 5; j++) {
- p_dev->resource[0]->start = base[j];
- p_dev->io_lines = base[j] ? 16 : 3;
- if (!pcmcia_request_io(p_dev))
- return 0;
- }
+ if (p_dev->io_lines > 3)
+ return -ENODEV;
+
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->end = 8;
+
+ for (j = 0; j < 5; j++) {
+ p_dev->resource[0]->start = base[j];
+ p_dev->io_lines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev))
+ return 0;
}
return -ENODEV;
}
@@ -461,26 +443,9 @@ static int simple_config(struct pcmcia_device *link)
struct serial_info *info = link->priv;
int i = -ENODEV, try;
- /* If the card is already configured, look up the port and irq */
- if (link->function_config) {
- unsigned int port = 0;
- if ((link->resource[1]->end != 0) &&
- (resource_size(link->resource[1]) == 8)) {
- port = link->resource[1]->end;
- info->slave = 1;
- } else if ((info->manfid == MANFID_OSITECH) &&
- (resource_size(link->resource[0]) == 0x40)) {
- port = link->resource[0]->start + 0x28;
- info->slave = 1;
- }
- if (info->slave) {
- return setup_serial(link, info, port,
- link->irq);
- }
- }
-
/* First pass: look for a config entry that looks normal.
* Two tries: without IO aliases, then with aliases */
+ link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_SET_IO;
for (try = 0; try < 4; try++)
if (!pcmcia_loop_config(link, simple_config_check, &try))
goto found_port;
@@ -491,13 +456,12 @@ static int simple_config(struct pcmcia_device *link)
if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
goto found_port;
- printk(KERN_NOTICE
- "serial_cs: no usable port range found, giving up\n");
+ dev_warn(&link->dev, "no usable port range found, giving up\n");
return -1;
found_port:
if (info->multi && (info->manfid == MANFID_3COM))
- link->conf.ConfigIndex &= ~(0x08);
+ link->config_index &= ~(0x08);
/*
* Apply any configuration quirks.
@@ -505,51 +469,50 @@ found_port:
if (info->quirk && info->quirk->config)
info->quirk->config(link);
- i = pcmcia_request_configuration(link, &link->conf);
+ i = pcmcia_enable_device(link);
if (i != 0)
return -1;
return setup_serial(link, info, link->resource[0]->start, link->irq);
}
-static int multi_config_check(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
+static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
- int *base2 = priv_data;
+ int *multi = priv_data;
+
+ if (p_dev->resource[1]->end)
+ return -EINVAL;
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
- if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
- p_dev->resource[0]->start = cf->io.win[0].base;
- p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev)) {
- *base2 = p_dev->resource[0]->start + 8;
- return 0;
- }
- }
- return -ENODEV;
+ if (p_dev->resource[0]->end <= 8)
+ return -EINVAL;
+
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->end = *multi * 8;
+
+ if (pcmcia_request_io(p_dev))
+ return -ENODEV;
+ return 0;
}
static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
void *priv_data)
{
int *base2 = priv_data;
- if (cf->io.nwin == 2) {
- p_dev->resource[0]->start = cf->io.win[0].base;
- p_dev->resource[1]->start = cf->io.win[1].base;
- p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev)) {
- *base2 = p_dev->resource[1]->start;
- return 0;
- }
- }
- return -ENODEV;
+ if (!p_dev->resource[0]->end || !p_dev->resource[1]->end)
+ return -ENODEV;
+
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 8;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+
+ if (pcmcia_request_io(p_dev))
+ return -ENODEV;
+
+ *base2 = p_dev->resource[0]->start + 8;
+ return 0;
}
static int multi_config(struct pcmcia_device *link)
@@ -557,23 +520,23 @@ static int multi_config(struct pcmcia_device *link)
struct serial_info *info = link->priv;
int i, base2 = 0;
+ link->config_flags |= CONF_AUTO_SET_IO;
/* First, look for a generic full-sized window */
- link->resource[0]->end = info->multi * 8;
- if (pcmcia_loop_config(link, multi_config_check, &base2)) {
+ if (!pcmcia_loop_config(link, multi_config_check, &info->multi))
+ base2 = link->resource[0]->start + 8;
+ else {
/* If that didn't work, look for two windows */
- link->resource[0]->end = link->resource[1]->end = 8;
info->multi = 2;
if (pcmcia_loop_config(link, multi_config_check_notpicky,
&base2)) {
- printk(KERN_NOTICE "serial_cs: no usable port range"
+ dev_warn(&link->dev, "no usable port range "
"found, giving up\n");
return -ENODEV;
}
}
if (!link->irq)
- dev_warn(&link->dev,
- "serial_cs: no usable IRQ found, continuing...\n");
+ dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
/*
* Apply any configuration quirks.
@@ -581,7 +544,7 @@ static int multi_config(struct pcmcia_device *link)
if (info->quirk && info->quirk->config)
info->quirk->config(link);
- i = pcmcia_request_configuration(link, &link->conf);
+ i = pcmcia_enable_device(link);
if (i != 0)
return -ENODEV;
@@ -593,11 +556,11 @@ static int multi_config(struct pcmcia_device *link)
info->prodid == PRODID_POSSIO_GCC)) {
int err;
- if (link->conf.ConfigIndex == 1 ||
- link->conf.ConfigIndex == 3) {
+ if (link->config_index == 1 ||
+ link->config_index == 3) {
err = setup_serial(link, info, base2,
link->irq);
- base2 = link->resource[0]->start;;
+ base2 = link->resource[0]->start;
} else {
err = setup_serial(link, info, link->resource[0]->start,
link->irq);
@@ -621,33 +584,24 @@ static int multi_config(struct pcmcia_device *link)
return 0;
}
-static int serial_check_for_multi(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
+static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
{
struct serial_info *info = p_dev->priv;
- if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
- info->multi = cf->io.win[0].len >> 3;
+ if (!p_dev->resource[0]->end)
+ return -EINVAL;
+
+ if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0))
+ info->multi = p_dev->resource[0]->end >> 3;
- if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
- (cf->io.win[1].len == 8))
+ if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8)
+ && (p_dev->resource[1]->end == 8))
info->multi = 2;
return 0; /* break */
}
-/*======================================================================
-
- serial_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- serial device available to the system.
-
-======================================================================*/
-
static int serial_config(struct pcmcia_device * link)
{
struct serial_info *info = link->priv;
@@ -675,6 +629,7 @@ static int serial_config(struct pcmcia_device * link)
multifunction cards that ask for appropriate IO port ranges */
if ((info->multi == 0) &&
(link->has_func_id) &&
+ (link->socket->pcmcia_pfc == 0) &&
((link->func_id == CISTPL_FUNCID_MULTI) ||
(link->func_id == CISTPL_FUNCID_SERIAL)))
pcmcia_loop_config(link, serial_check_for_multi, info);
@@ -685,7 +640,13 @@ static int serial_config(struct pcmcia_device * link)
if (info->quirk && info->quirk->multi != -1)
info->multi = info->quirk->multi;
- if (info->multi > 1)
+ dev_info(&link->dev,
+ "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
+ link->manf_id, link->card_id,
+ link->socket->pcmcia_pfc, info->multi, info->quirk);
+ if (link->socket->pcmcia_pfc)
+ i = pfc_config(link);
+ else if (info->multi > 1)
i = multi_config(link);
else
i = simple_config(link);
@@ -704,7 +665,7 @@ static int serial_config(struct pcmcia_device * link)
return 0;
failed:
- dev_warn(&link->dev, "serial_cs: failed to initialize\n");
+ dev_warn(&link->dev, "failed to initialize\n");
serial_remove(link);
return -ENODEV;
}
@@ -884,9 +845,7 @@ MODULE_FIRMWARE("cis/RS-COM-2P.cis");
static struct pcmcia_driver serial_cs_driver = {
.owner = THIS_MODULE,
- .drv = {
- .name = "serial_cs",
- },
+ .name = "serial_cs",
.probe = serial_probe,
.remove = serial_detach,
.id_table = serial_ids,
generated by cgit v1.1 at 2024-09-24 04:02:28 +0000