diff options
Diffstat (limited to 'drivers/staging/ft1000/ft1000-usb/ft1000_usb.h')
| -rw-r--r-- | drivers/staging/ft1000/ft1000-usb/ft1000_usb.h | 413 |
1 files changed, 10 insertions, 403 deletions
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h index 0b30020..51c0847 100644 --- a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h +++ b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h @@ -2,81 +2,18 @@ #define _FT1000_USB_H_ /*Jim*/ +#include "../ft1000.h" #include "ft1000_ioctl.h" #define FT1000_DRV_VER 0x01010403 -#define MODESZ 2 #define MAX_NUM_APP 6 #define MAX_MSG_LIMIT 200 #define NUM_OF_FREE_BUFFERS 1500 -// Driver message types -#define MEDIA_STATE 0x0010 -#define DSP_PROVISION 0x0030 -#define DSP_INIT_MSG 0x0050 -#define DSP_STORE_INFO 0x0070 -#define DSP_GET_INFO 0x0071 -#define GET_DRV_ERR_RPT_MSG 0x0073 -#define RSP_DRV_ERR_RPT_MSG 0x0074 - - -// Size of DPRAM Command -#define MAX_CMD_SQSIZE 1780 -#define SLOWQ_TYPE 0 #define PSEUDOSZ 16 -#define DSP_QID_OFFSET 4 - - -// MEMORY MAP FOR ELECTRABUZZ ASIC -#define FT1000_REG_DFIFO_STAT 0x0008 // Downlink FIFO status register -#define FT1000_REG_DPRAM_DATA 0x000C // DPRAM VALUE in DPRAM ADDR - -#define FT1000_DSP_LED 0xFFA // dsp led status for PAD device - -#define FT1000_MAG_DSP_LED 0x3FE // dsp led status for PAD device -#define FT1000_MAG_DSP_LED_INDX 0x1 // dsp led status for PAD device #define SUCCESS 0x00 - -#define DRIVERID 0x00 - -// Driver Error Messages for DSP -#define DSP_CONDRESET_INFO 0x7ef2 -#define DSP_HB_INFO 0x7ef0 - -// Magnemite specific defines -#define hi_mag 0x6968 // Byte swap hi to avoid additional system call -#define ho_mag 0x6f68 // Byte swap ho to avoid additional system call - - - -struct media_msg { - struct pseudo_hdr pseudo; - u16 type; - u16 length; - u16 state; - u32 ip_addr; - u32 net_mask; - u32 gateway; - u32 dns_1; - u32 dns_2; -} __attribute__ ((packed)); - -struct dsp_init_msg { - struct pseudo_hdr pseudo; - u16 type; - u16 length; - u8 DspVer[DSPVERSZ]; // DSP version number - u8 HwSerNum[HWSERNUMSZ]; // Hardware Serial Number - u8 Sku[SKUSZ]; // SKU - u8 eui64[EUISZ]; // EUI64 - u8 ProductMode[MODESZ]; // Product Mode (Market/Production) - u8 RfCalVer[CALVERSZ]; // Rf Calibration version - u8 RfCalDate[CALDATESZ]; // Rf Calibration date -} __attribute__ ((packed)); - - struct app_info_block { u32 nTxMsg; // DPRAM msg sent to DSP with app_id u32 nRxMsg; // DPRAM msg rcv from dsp with app_id @@ -90,11 +27,6 @@ struct app_info_block { struct list_head app_sqlist; // link list of msgs for applicaton on slow queue } __attribute__((packed)); -struct prov_record { - struct list_head list; - u8 *pprov_data; -}; - /*end of Jim*/ #define DEBUG(args...) printk(KERN_INFO args) @@ -108,350 +40,25 @@ struct prov_record { #define LARGE_TIMEOUT 5000 -#define MAX_DSP_SESS_REC 1024 - -#define MAX_NUM_CARDS 32 - -#define DSPVERSZ 4 -#define HWSERNUMSZ 16 -#define SKUSZ 20 -#define EUISZ 8 -#define CALVERSZ 2 -#define CALDATESZ 6 -#define MODESZ 2 - -#define DSPID 0x20 -#define HOSTID 0x10 - -#define DSPOAM 0x80 -#define DSPAIRID 0x90 - -#define DRIVERID 0x00 -#define FMM 0x10 -#define NETWORKID 0x20 -#define AUTOLNCHID 0x30 -#define DSPLPBKID 0x40 - #define DSPBCMSGID 0x10 -#define ENET_MAX_SIZE 1514 -#define ENET_HEADER_SIZE 14 - - -#define CIS_NET_ADDR_OFFSET 0xff0 - -// MAGNEMITE specific - -#define FT1000_REG_MAG_UFDR 0x0000 // Uplink FIFO Data Register. - -#define FT1000_REG_MAG_UFDRL 0x0000 // Uplink FIFO Data Register low-word. - -#define FT1000_REG_MAG_UFDRH 0x0002 // Uplink FIFO Data Register high-word. - -#define FT1000_REG_MAG_UFER 0x0004 // Uplink FIFO End Register - -#define FT1000_REG_MAG_UFSR 0x0006 // Uplink FIFO Status Register - -#define FT1000_REG_MAG_DFR 0x0008 // Downlink FIFO Register - -#define FT1000_REG_MAG_DFRL 0x0008 // Downlink FIFO Register low-word - -#define FT1000_REG_MAG_DFRH 0x000a // Downlink FIFO Register high-word - -#define FT1000_REG_MAG_DFSR 0x000c // Downlink FIFO Status Register - -#define FT1000_REG_MAG_DPDATA 0x0010 // Dual Port RAM Indirect Data Register - -#define FT1000_REG_MAG_DPDATAL 0x0010 // Dual Port RAM Indirect Data Register low-word - -#define FT1000_REG_MAG_DPDATAH 0x0012 // Dual Port RAM Indirect Data Register high-word - -#define FT1000_REG_MAG_WATERMARK 0x002c // Supv. Control Reg. LLC register - -#define FT1000_REG_MAG_VERSION 0x0030 // LLC Version LLC register - - - -// Common - -#define FT1000_REG_DPRAM_ADDR 0x000E // DPRAM ADDRESS when card in IO mode - -#define FT1000_REG_SUP_CTRL 0x0020 // Supv. Control Reg. LLC register - -#define FT1000_REG_SUP_STAT 0x0022 // Supv. Status Reg LLC register - -#define FT1000_REG_RESET 0x0024 // Reset Reg LLC register - -#define FT1000_REG_SUP_ISR 0x0026 // Supv ISR LLC register - -#define FT1000_REG_SUP_IMASK 0x0028 // Supervisor Interrupt Mask LLC register - -#define FT1000_REG_DOORBELL 0x002a // Door Bell Reg LLC register - -#define FT1000_REG_ASIC_ID 0x002e // ASIC Identification Number - - // (Electrabuzz=0 Magnemite=TBD) - - - -// DSP doorbells - -#define FT1000_DB_DPRAM_RX 0x0001 // this value indicates that DSP has - - // data for host in DPRAM SlowQ - -#define FT1000_DB_DNLD_RX 0x0002 // Downloader handshake doorbell - -#define FT1000_ASIC_RESET_REQ 0x0004 - -#define FT1000_DSP_ASIC_RESET 0x0008 - - - -#define FT1000_DB_COND_RESET 0x0010 - - - -// Host doorbells - -#define FT1000_DB_DPRAM_TX 0x0100 // this value indicates that host has - - // data for DSP in DPRAM. - -#define FT1000_DB_DNLD_TX 0x0200 // Downloader handshake doorbell - -#define FT1000_ASIC_RESET_DSP 0x0400 - -#define FT1000_DB_HB 0x1000 // this value indicates that supervisor - - - -// Electrabuzz specific DPRAM mapping // has a heartbeat message for DSP. - -#define FT1000_DPRAM_BASE 0x1000 // 0x0000 to 0x07FF DPRAM 2Kx16 - R/W from PCMCIA or DSP - -#define FT1000_DPRAM_TX_BASE 0x1002 // TX AREA (SlowQ) - -#define FT1000_DPRAM_RX_BASE 0x1800 // RX AREA (SlowQ) - -#define FT1000_DPRAM_SIZE 0x1000 // 4K bytes - - - -#define FT1000_DRV_DEBUG 0x17E0 // Debug area for driver - -#define FT1000_FIFO_LEN 0x17FC // total length for DSP FIFO tracking - -#define FT1000_HI_HO 0x17FE // heartbeat with HI/HO - -#define FT1000_DSP_STATUS 0x1FFE // dsp status - non-zero is a request to reset dsp - - - -#define FT1000_DSP_CON_STATE 0x1FF8 // DSP Connection Status Info - -#define FT1000_DSP_LEDS 0x1FFA // DSP LEDS for rcv pwr strength, Rx data, Tx data - -#define DSP_TIMESTAMP 0x1FFC // dsp timestamp - -#define DSP_TIMESTAMP_DIFF 0x1FFA // difference of dsp timestamp in DPRAM and Pseudo header. - - - -#define FT1000_DPRAM_FEFE 0x1002 // Dsp Downloader handshake location - - - -#define FT1000_DSP_TIMER0 0x1FF0 - -#define FT1000_DSP_TIMER1 0x1FF2 - -#define FT1000_DSP_TIMER2 0x1FF4 - -#define FT1000_DSP_TIMER3 0x1FF6 - - +/* Electrabuzz specific DPRAM mapping */ +/* this is used by ft1000_usb driver - isn't that a bug? */ +#undef FT1000_DPRAM_RX_BASE +#define FT1000_DPRAM_RX_BASE 0x1800 /* RX AREA (SlowQ) */ // MEMORY MAP FOR MAGNEMITE - -#define FT1000_DPRAM_MAG_TX_BASE 0x0000 // TX AREA (SlowQ) - -#define FT1000_DPRAM_MAG_RX_BASE 0x0200 // RX AREA (SlowQ) - - - -#define FT1000_MAG_FIFO_LEN 0x1FF // total length for DSP FIFO tracking - -#define FT1000_MAG_FIFO_LEN_INDX 0x1 // low-word index - -#define FT1000_MAG_HI_HO 0x1FF // heartbeat with HI/HO - -#define FT1000_MAG_HI_HO_INDX 0x0 // high-word index - -#define FT1000_MAG_DSP_LEDS 0x3FE // dsp led status for PAD device - -#define FT1000_MAG_DSP_LEDS_INDX 0x1 // dsp led status for PAD device - - - -#define FT1000_MAG_DSP_CON_STATE 0x3FE // DSP Connection Status Info - -#define FT1000_MAG_DSP_CON_STATE_INDX 0x0 // DSP Connection Status Info - - - -#define FT1000_MAG_DPRAM_FEFE 0x000 // location for dsp ready indicator - -#define FT1000_MAG_DPRAM_FEFE_INDX 0x0 // location for dsp ready indicator - - - -#define FT1000_MAG_DSP_TIMER0 0x3FC - -#define FT1000_MAG_DSP_TIMER0_INDX 0x1 - - - -#define FT1000_MAG_DSP_TIMER1 0x3FC - -#define FT1000_MAG_DSP_TIMER1_INDX 0x0 - - - -#define FT1000_MAG_DSP_TIMER2 0x3FD - -#define FT1000_MAG_DSP_TIMER2_INDX 0x1 - - - -#define FT1000_MAG_DSP_TIMER3 0x3FD - -#define FT1000_MAG_DSP_TIMER3_INDX 0x0 - - - -#define FT1000_MAG_TOTAL_LEN 0x200 - -#define FT1000_MAG_TOTAL_LEN_INDX 0x1 - - - -#define FT1000_MAG_PH_LEN 0x200 - -#define FT1000_MAG_PH_LEN_INDX 0x0 - - - -#define FT1000_MAG_PORT_ID 0x201 - -#define FT1000_MAG_PORT_ID_INDX 0x0 - - - -// - -// Constants for the FT1000_REG_SUP_ISR - -// - -// Indicate the cause of an interrupt. - -// - -// SUPERVISOR ISR BIT MAPS - - - -#define ISR_EMPTY (u8)0x00 // no bits set in ISR - -#define ISR_DOORBELL_ACK (u8)0x01 // the doorbell i sent has been received. - -#define ISR_DOORBELL_PEND (u8)0x02 // doorbell for me - -#define ISR_RCV (u8)0x04 // packet received with no errors - -#define ISR_WATERMARK (u8)0x08 // - - - -// Interrupt mask register defines - -// note these are different from the ISR BIT MAPS. - -#define ISR_MASK_NONE 0x0000 - -#define ISR_MASK_DOORBELL_ACK 0x0001 - -#define ISR_MASK_DOORBELL_PEND 0x0002 - -#define ISR_MASK_RCV 0x0004 - -#define ISR_MASK_WATERMARK 0x0008 // Normally we will only mask the watermark interrupt when we want to enable interrupts. - -#define ISR_MASK_ALL 0xffff - - - -#define HOST_INTF_LE 0x0000 // Host interface little endian - -#define HOST_INTF_BE 0x0001 // Host interface big endian - - - -#define ISR_DEFAULT_MASK 0x7ff9 - - - -#define hi 0x6869 - -#define ho 0x686f - - - -#define FT1000_ASIC_RESET 0x80 // COR value for soft reset to PCMCIA core - -#define FT1000_ASIC_BITS 0x51 // Bits set in COR register under normal operation - -#define FT1000_ASIC_MAG_BITS 0x55 // Bits set in COR register under normal operation - - - -#define FT1000_COR_OFFSET 0x100 - - - -#define ELECTRABUZZ_ID 0 // ASIC ID for ELECTRABUZZ - -#define MAGNEMITE_ID 0x1a01 // ASIC ID for MAGNEMITE - - +/* the indexes are swapped comparing to PCMCIA - is it OK or a bug? */ +#undef FT1000_MAG_DSP_LED_INDX +#define FT1000_MAG_DSP_LED_INDX 0x1 /* dsp led status for PAD device */ +#undef FT1000_MAG_DSP_CON_STATE_INDX +#define FT1000_MAG_DSP_CON_STATE_INDX 0x0 /* DSP Connection Status Info */ // Maximum times trying to get ASIC out of reset - #define MAX_ASIC_RESET_CNT 20 - - -#define DSP_RESET_BIT 0x1 - -#define ASIC_RESET_BIT 0x2 - -#define DSP_UNENCRYPTED 0x4 - -#define DSP_ENCRYPTED 0x8 - -#define EFUSE_MEM_DISABLE 0x0040 - - #define MAX_BUF_SIZE 4096 -struct drv_msg { - struct pseudo_hdr pseudo; - u16 type; - u16 length; - u8 data[0]; -} __attribute__ ((packed)); - struct ft1000_device { struct usb_device *dev; |