diff options
Diffstat (limited to 'drivers/staging/rt2860/rtmp.h')
| -rw-r--r-- | drivers/staging/rt2860/rtmp.h | 1630 |
1 files changed, 815 insertions, 815 deletions
diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h index f6b8f62..2ac9663 100644 --- a/drivers/staging/rt2860/rtmp.h +++ b/drivers/staging/rt2860/rtmp.h @@ -49,14 +49,14 @@ typedef struct _RTMP_ADAPTER *PRTMP_ADAPTER; typedef struct _RTMP_CHIP_OP_ RTMP_CHIP_OP; -//#define DBG 1 +/*#define DBG 1 */ -//#define DBG_DIAGNOSE 1 +/*#define DBG_DIAGNOSE 1 */ -//+++Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function +/*+++Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function */ #define MAX_DATAMM_RETRY 3 #define MGMT_USE_QUEUE_FLAG 0x80 -//---Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function +/*---Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function */ #define MAXSEQ (0xFFF) @@ -79,7 +79,7 @@ extern UCHAR EAPOL_LLC_SNAP[8]; extern UCHAR EAPOL[2]; extern UCHAR IPX[2]; extern UCHAR APPLE_TALK[2]; -extern UCHAR RateIdToPlcpSignal[12]; // see IEEE802.11a-1999 p.14 +extern UCHAR RateIdToPlcpSignal[12]; /* see IEEE802.11a-1999 p.14 */ extern UCHAR OfdmRateToRxwiMCS[]; extern UCHAR OfdmSignalToRateId[16]; extern UCHAR default_cwmin[4]; @@ -147,9 +147,9 @@ extern UCHAR RateSwitchTable11N2SForABand[]; extern UCHAR PRE_N_HT_OUI[]; typedef struct _RSSI_SAMPLE { - CHAR LastRssi0; // last received RSSI - CHAR LastRssi1; // last received RSSI - CHAR LastRssi2; // last received RSSI + CHAR LastRssi0; /* last received RSSI */ + CHAR LastRssi1; /* last received RSSI */ + CHAR LastRssi2; /* last received RSSI */ CHAR AvgRssi0; CHAR AvgRssi1; CHAR AvgRssi2; @@ -158,14 +158,14 @@ typedef struct _RSSI_SAMPLE { SHORT AvgRssi2X8; } RSSI_SAMPLE; -// -// Queue structure and macros -// +/* */ +/* Queue structure and macros */ +/* */ typedef struct _QUEUE_ENTRY { struct _QUEUE_ENTRY *Next; } QUEUE_ENTRY, *PQUEUE_ENTRY; -// Queue structure +/* Queue structure */ typedef struct _QUEUE_HEADER { PQUEUE_ENTRY Head; PQUEUE_ENTRY Tail; @@ -224,15 +224,15 @@ typedef struct _QUEUE_HEADER { (QueueHeader)->Number++; \ } -// -// Macros for flag and ref count operations -// +/* */ +/* Macros for flag and ref count operations */ +/* */ #define RTMP_SET_FLAG(_M, _F) ((_M)->Flags |= (_F)) #define RTMP_CLEAR_FLAG(_M, _F) ((_M)->Flags &= ~(_F)) #define RTMP_CLEAR_FLAGS(_M) ((_M)->Flags = 0) #define RTMP_TEST_FLAG(_M, _F) (((_M)->Flags & (_F)) != 0) #define RTMP_TEST_FLAGS(_M, _F) (((_M)->Flags & (_F)) == (_F)) -// Macro for power save flag. +/* Macro for power save flag. */ #define RTMP_SET_PSFLAG(_M, _F) ((_M)->PSFlags |= (_F)) #define RTMP_CLEAR_PSFLAG(_M, _F) ((_M)->PSFlags &= ~(_F)) #define RTMP_CLEAR_PSFLAGS(_M) ((_M)->PSFlags = 0) @@ -266,7 +266,7 @@ typedef struct _QUEUE_HEADER { (_idx) = (_idx+1) % (_RingSize); \ } -// StaActive.SupportedHtPhy.MCSSet is copied from AP beacon. Don't need to update here. +/* StaActive.SupportedHtPhy.MCSSet is copied from AP beacon. Don't need to update here. */ #define COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd) \ { \ _pAd->StaActive.SupportedHtPhy.ChannelWidth = _pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth; \ @@ -290,25 +290,25 @@ typedef struct _QUEUE_HEADER { _pAd->MacTab.Content[BSSID_WCID].MaxRAmpduFactor = (UCHAR)(_pHtCapability->HtCapParm.MaxRAmpduFactor); \ } -// -// MACRO for 32-bit PCI register read / write -// -// Usage : RTMP_IO_READ32( -// PRTMP_ADAPTER pAd, -// ULONG Register_Offset, -// PULONG pValue) -// -// RTMP_IO_WRITE32( -// PRTMP_ADAPTER pAd, -// ULONG Register_Offset, -// ULONG Value) -// - -// -// Common fragment list structure - Identical to the scatter gather frag list structure -// -//#define RTMP_SCATTER_GATHER_ELEMENT SCATTER_GATHER_ELEMENT -//#define PRTMP_SCATTER_GATHER_ELEMENT PSCATTER_GATHER_ELEMENT +/* */ +/* MACRO for 32-bit PCI register read / write */ +/* */ +/* Usage : RTMP_IO_READ32( */ +/* PRTMP_ADAPTER pAd, */ +/* ULONG Register_Offset, */ +/* PULONG pValue) */ +/* */ +/* RTMP_IO_WRITE32( */ +/* PRTMP_ADAPTER pAd, */ +/* ULONG Register_Offset, */ +/* ULONG Value) */ +/* */ + +/* */ +/* Common fragment list structure - Identical to the scatter gather frag list structure */ +/* */ +/*#define RTMP_SCATTER_GATHER_ELEMENT SCATTER_GATHER_ELEMENT */ +/*#define PRTMP_SCATTER_GATHER_ELEMENT PSCATTER_GATHER_ELEMENT */ #define NIC_MAX_PHYS_BUF_COUNT 8 typedef struct _RTMP_SCATTER_GATHER_ELEMENT { @@ -323,9 +323,9 @@ typedef struct _RTMP_SCATTER_GATHER_LIST { RTMP_SCATTER_GATHER_ELEMENT Elements[NIC_MAX_PHYS_BUF_COUNT]; } RTMP_SCATTER_GATHER_LIST, *PRTMP_SCATTER_GATHER_LIST; -// -// Some utility macros -// +/* */ +/* Some utility macros */ +/* */ #ifndef min #define min(_a, _b) (((_a) < (_b)) ? (_a) : (_b)) #endif @@ -343,11 +343,11 @@ typedef struct _RTMP_SCATTER_GATHER_LIST { #define MONITOR_ON(_p) (((_p)->StaCfg.BssType) == BSS_MONITOR) #define IDLE_ON(_p) (!INFRA_ON(_p) && !ADHOC_ON(_p)) -// Check LEAP & CCKM flags +/* Check LEAP & CCKM flags */ #define LEAP_ON(_p) (((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) #define LEAP_CCKM_ON(_p) ((((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) && ((_p)->StaCfg.LeapAuthInfo.CCKM == TRUE)) -// if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required +/* if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required */ #define EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(_pBufVA, _pExtraLlcSnapEncap) \ { \ if (((*(_pBufVA + 12) << 8) + *(_pBufVA + 13)) > 1500) \ @@ -365,7 +365,7 @@ typedef struct _RTMP_SCATTER_GATHER_LIST { } \ } -// New Define for new Tx Path. +/* New Define for new Tx Path. */ #define EXTRA_LLCSNAP_ENCAP_FROM_PKT_OFFSET(_pBufVA, _pExtraLlcSnapEncap) \ { \ if (((*(_pBufVA) << 8) + *(_pBufVA + 1)) > 1500) \ @@ -390,13 +390,13 @@ typedef struct _RTMP_SCATTER_GATHER_LIST { NdisMoveMemory((_p + MAC_ADDR_LEN * 2), _pType, LENGTH_802_3_TYPE); \ } -// if pData has no LLC/SNAP (neither RFC1042 nor Bridge tunnel), keep it that way. -// else if the received frame is LLC/SNAP-encaped IPX or APPLETALK, preserve the LLC/SNAP field -// else remove the LLC/SNAP field from the result Ethernet frame -// Patch for WHQL only, which did not turn on Netbios but use IPX within its payload -// Note: -// _pData & _DataSize may be altered (remove 8-byte LLC/SNAP) by this MACRO -// _pRemovedLLCSNAP: pointer to removed LLC/SNAP; NULL is not removed +/* if pData has no LLC/SNAP (neither RFC1042 nor Bridge tunnel), keep it that way. */ +/* else if the received frame is LLC/SNAP-encaped IPX or APPLETALK, preserve the LLC/SNAP field */ +/* else remove the LLC/SNAP field from the result Ethernet frame */ +/* Patch for WHQL only, which did not turn on Netbios but use IPX within its payload */ +/* Note: */ +/* _pData & _DataSize may be altered (remove 8-byte LLC/SNAP) by this MACRO */ +/* _pRemovedLLCSNAP: pointer to removed LLC/SNAP; NULL is not removed */ #define CONVERT_TO_802_3(_p8023hdr, _pDA, _pSA, _pData, _DataSize, _pRemovedLLCSNAP) \ { \ char LLC_Len[2]; \ @@ -430,9 +430,9 @@ typedef struct _RTMP_SCATTER_GATHER_LIST { } \ } -// Enqueue this frame to MLME engine -// We need to enqueue the whole frame because MLME need to pass data type -// information from 802.11 header +/* Enqueue this frame to MLME engine */ +/* We need to enqueue the whole frame because MLME need to pass data type */ +/* information from 802.11 header */ #ifdef RTMP_MAC_PCI #define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal) \ { \ @@ -441,21 +441,21 @@ typedef struct _RTMP_SCATTER_GATHER_LIST { RTMP_IO_READ32(_pAd, TSF_TIMER_DW0, &Low32TSF); \ MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal); \ } -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ #ifdef RTMP_MAC_USB #define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal) \ { \ UINT32 High32TSF=0, Low32TSF=0; \ MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal); \ } -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ #define MAC_ADDR_EQUAL(pAddr1,pAddr2) RTMPEqualMemory((PVOID)(pAddr1), (PVOID)(pAddr2), MAC_ADDR_LEN) #define SSID_EQUAL(ssid1, len1, ssid2, len2) ((len1==len2) && (RTMPEqualMemory(ssid1, ssid2, len1))) -// -// Check if it is Japan W53(ch52,56,60,64) channel. -// +/* */ +/* Check if it is Japan W53(ch52,56,60,64) channel. */ +/* */ #define JapanChannelCheck(channel) ((channel == 52) || (channel == 56) || (channel == 60) || (channel == 64)) #define STA_EXTRA_SETTING(_pAd) @@ -472,67 +472,67 @@ typedef struct _RTMP_SCATTER_GATHER_LIST { STA_EXTRA_SETTING(_pAd); \ } -// -// Data buffer for DMA operation, the buffer must be contiguous physical memory -// Both DMA to / from CPU use the same structure. -// +/* */ +/* Data buffer for DMA operation, the buffer must be contiguous physical memory */ +/* Both DMA to / from CPU use the same structure. */ +/* */ typedef struct _RTMP_DMABUF { ULONG AllocSize; - PVOID AllocVa; // TxBuf virtual address - NDIS_PHYSICAL_ADDRESS AllocPa; // TxBuf physical address + PVOID AllocVa; /* TxBuf virtual address */ + NDIS_PHYSICAL_ADDRESS AllocPa; /* TxBuf physical address */ } RTMP_DMABUF, *PRTMP_DMABUF; -// -// Control block (Descriptor) for all ring descriptor DMA operation, buffer must be -// contiguous physical memory. NDIS_PACKET stored the binding Rx packet descriptor -// which won't be released, driver has to wait until upper layer return the packet -// before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair -// to describe the packet buffer. For Tx, NDIS_PACKET stored the tx packet descriptor -// which driver should ACK upper layer when the tx is physically done or failed. -// +/* */ +/* Control block (Descriptor) for all ring descriptor DMA operation, buffer must be */ +/* contiguous physical memory. NDIS_PACKET stored the binding Rx packet descriptor */ +/* which won't be released, driver has to wait until upper layer return the packet */ +/* before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair */ +/* to describe the packet buffer. For Tx, NDIS_PACKET stored the tx packet descriptor */ +/* which driver should ACK upper layer when the tx is physically done or failed. */ +/* */ typedef struct _RTMP_DMACB { - ULONG AllocSize; // Control block size - PVOID AllocVa; // Control block virtual address - NDIS_PHYSICAL_ADDRESS AllocPa; // Control block physical address + ULONG AllocSize; /* Control block size */ + PVOID AllocVa; /* Control block virtual address */ + NDIS_PHYSICAL_ADDRESS AllocPa; /* Control block physical address */ PNDIS_PACKET pNdisPacket; PNDIS_PACKET pNextNdisPacket; - RTMP_DMABUF DmaBuf; // Associated DMA buffer structure + RTMP_DMABUF DmaBuf; /* Associated DMA buffer structure */ } RTMP_DMACB, *PRTMP_DMACB; typedef struct _RTMP_TX_RING { RTMP_DMACB Cell[TX_RING_SIZE]; UINT32 TxCpuIdx; UINT32 TxDmaIdx; - UINT32 TxSwFreeIdx; // software next free tx index + UINT32 TxSwFreeIdx; /* software next free tx index */ } RTMP_TX_RING, *PRTMP_TX_RING; typedef struct _RTMP_RX_RING { RTMP_DMACB Cell[RX_RING_SIZE]; UINT32 RxCpuIdx; UINT32 RxDmaIdx; - INT32 RxSwReadIdx; // software next read index + INT32 RxSwReadIdx; /* software next read index */ } RTMP_RX_RING, *PRTMP_RX_RING; typedef struct _RTMP_MGMT_RING { RTMP_DMACB Cell[MGMT_RING_SIZE]; UINT32 TxCpuIdx; UINT32 TxDmaIdx; - UINT32 TxSwFreeIdx; // software next free tx index + UINT32 TxSwFreeIdx; /* software next free tx index */ } RTMP_MGMT_RING, *PRTMP_MGMT_RING; -// -// Statistic counter structure -// +/* */ +/* Statistic counter structure */ +/* */ typedef struct _COUNTER_802_3 { - // General Stats + /* General Stats */ ULONG GoodTransmits; ULONG GoodReceives; ULONG TxErrors; ULONG RxErrors; ULONG RxNoBuffer; - // Ethernet Stats + /* Ethernet Stats */ ULONG RcvAlignmentErrors; ULONG OneCollision; ULONG MoreCollisions; @@ -557,8 +557,8 @@ typedef struct _COUNTER_802_11 { } COUNTER_802_11, *PCOUNTER_802_11; typedef struct _COUNTER_RALINK { - ULONG TransmittedByteCount; // both successful and failure, used to calculate TX throughput - ULONG ReceivedByteCount; // both CRC okay and CRC error, used to calculate RX throughput + ULONG TransmittedByteCount; /* both successful and failure, used to calculate TX throughput */ + ULONG ReceivedByteCount; /* both CRC okay and CRC error, used to calculate RX throughput */ ULONG BeenDisassociatedCount; ULONG BadCQIAutoRecoveryCount; ULONG PoorCQIRoamingCount; @@ -580,17 +580,17 @@ typedef struct _COUNTER_RALINK { UINT32 OneSecReceivedByteCount; UINT32 OneSecFrameDuplicateCount; - UINT32 OneSecTransmittedByteCount; // both successful and failure, used to calculate TX throughput + UINT32 OneSecTransmittedByteCount; /* both successful and failure, used to calculate TX throughput */ UINT32 OneSecTxNoRetryOkCount; UINT32 OneSecTxRetryOkCount; UINT32 OneSecTxFailCount; - UINT32 OneSecFalseCCACnt; // CCA error count, for debug purpose, might move to global counter - UINT32 OneSecRxOkCnt; // RX without error - UINT32 OneSecRxOkDataCnt; // unicast-to-me DATA frame count - UINT32 OneSecRxFcsErrCnt; // CRC error + UINT32 OneSecFalseCCACnt; /* CCA error count, for debug purpose, might move to global counter */ + UINT32 OneSecRxOkCnt; /* RX without error */ + UINT32 OneSecRxOkDataCnt; /* unicast-to-me DATA frame count */ + UINT32 OneSecRxFcsErrCnt; /* CRC error */ UINT32 OneSecBeaconSentCnt; - UINT32 LastOneSecTotalTxCount; // OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount - UINT32 LastOneSecRxOkDataCnt; // OneSecRxOkDataCnt + UINT32 LastOneSecTotalTxCount; /* OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount */ + UINT32 LastOneSecRxOkDataCnt; /* OneSecRxOkDataCnt */ ULONG DuplicateRcv; ULONG TxAggCount; ULONG TxNonAggCount; @@ -622,15 +622,15 @@ typedef struct _COUNTER_RALINK { } COUNTER_RALINK, *PCOUNTER_RALINK; typedef struct _COUNTER_DRS { - // to record the each TX rate's quality. 0 is best, the bigger the worse. + /* to record the each TX rate's quality. 0 is best, the bigger the worse. */ USHORT TxQuality[MAX_STEP_OF_TX_RATE_SWITCH]; UCHAR PER[MAX_STEP_OF_TX_RATE_SWITCH]; - UCHAR TxRateUpPenalty; // extra # of second penalty due to last unstable condition - ULONG CurrTxRateStableTime; // # of second in current TX rate + UCHAR TxRateUpPenalty; /* extra # of second penalty due to last unstable condition */ + ULONG CurrTxRateStableTime; /* # of second in current TX rate */ BOOLEAN fNoisyEnvironment; BOOLEAN fLastSecAccordingRSSI; - UCHAR LastSecTxRateChangeAction; // 0: no change, 1:rate UP, 2:rate down - UCHAR LastTimeTxRateChangeAction; //Keep last time value of LastSecTxRateChangeAction + UCHAR LastSecTxRateChangeAction; /* 0: no change, 1:rate UP, 2:rate down */ + UCHAR LastTimeTxRateChangeAction; /*Keep last time value of LastSecTxRateChangeAction */ ULONG LastTxOkCount; } COUNTER_DRS, *PCOUNTER_DRS; @@ -638,22 +638,22 @@ typedef struct _COUNTER_DRS { * security key related data structure **************************************************************************/ typedef struct _CIPHER_KEY { - UCHAR Key[16]; // right now we implement 4 keys, 128 bits max - UCHAR RxMic[8]; // make alignment + UCHAR Key[16]; /* right now we implement 4 keys, 128 bits max */ + UCHAR RxMic[8]; /* make alignment */ UCHAR TxMic[8]; - UCHAR TxTsc[6]; // 48bit TSC value - UCHAR RxTsc[6]; // 48bit TSC value - UCHAR CipherAlg; // 0-none, 1:WEP64, 2:WEP128, 3:TKIP, 4:AES, 5:CKIP64, 6:CKIP128 + UCHAR TxTsc[6]; /* 48bit TSC value */ + UCHAR RxTsc[6]; /* 48bit TSC value */ + UCHAR CipherAlg; /* 0-none, 1:WEP64, 2:WEP128, 3:TKIP, 4:AES, 5:CKIP64, 6:CKIP128 */ UCHAR KeyLen; UCHAR BssId[6]; - // Key length for each key, 0: entry is invalid - UCHAR Type; // Indicate Pairwise/Group when reporting MIC error + /* Key length for each key, 0: entry is invalid */ + UCHAR Type; /* Indicate Pairwise/Group when reporting MIC error */ } CIPHER_KEY, *PCIPHER_KEY; -// structure to define WPA Group Key Rekey Interval +/* structure to define WPA Group Key Rekey Interval */ typedef struct PACKED _RT_802_11_WPA_REKEY { - ULONG ReKeyMethod; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based - ULONG ReKeyInterval; // time-based: seconds, packet-based: kilo-packets + ULONG ReKeyMethod; /* mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based */ + ULONG ReKeyInterval; /* time-based: seconds, packet-based: kilo-packets */ } RT_WPA_REKEY, *PRT_WPA_REKEY, RT_802_11_WPA_REKEY, *PRT_802_11_WPA_REKEY; #ifdef RTMP_MAC_USB @@ -661,26 +661,26 @@ typedef struct PACKED _RT_802_11_WPA_REKEY { * RTUSB I/O related data structure **************************************************************************/ typedef struct _RT_SET_ASIC_WCID { - ULONG WCID; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based - ULONG SetTid; // time-based: seconds, packet-based: kilo-packets - ULONG DeleteTid; // time-based: seconds, packet-based: kilo-packets - UCHAR Addr[MAC_ADDR_LEN]; // avoid in interrupt when write key + ULONG WCID; /* mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based */ + ULONG SetTid; /* time-based: seconds, packet-based: kilo-packets */ + ULONG DeleteTid; /* time-based: seconds, packet-based: kilo-packets */ + UCHAR Addr[MAC_ADDR_LEN]; /* avoid in interrupt when write key */ } RT_SET_ASIC_WCID, *PRT_SET_ASIC_WCID; typedef struct _RT_SET_ASIC_WCID_ATTRI { - ULONG WCID; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based - ULONG Cipher; // ASIC Cipher definition + ULONG WCID; /* mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based */ + ULONG Cipher; /* ASIC Cipher definition */ UCHAR Addr[ETH_LENGTH_OF_ADDRESS]; } RT_SET_ASIC_WCID_ATTRI, *PRT_SET_ASIC_WCID_ATTRI; -// for USB interface, avoid in interrupt when write key +/* for USB interface, avoid in interrupt when write key */ typedef struct RT_ADD_PAIRWISE_KEY_ENTRY { UCHAR MacAddr[6]; - USHORT MacTabMatchWCID; // ASIC + USHORT MacTabMatchWCID; /* ASIC */ CIPHER_KEY CipherKey; } RT_ADD_PAIRWISE_KEY_ENTRY, *PRT_ADD_PAIRWISE_KEY_ENTRY; -// Cipher suite type for mixed mode group cipher, P802.11i-2004 +/* Cipher suite type for mixed mode group cipher, P802.11i-2004 */ typedef enum _RT_802_11_CIPHER_SUITE_TYPE { Cipher_Type_NONE, Cipher_Type_WEP40, @@ -689,14 +689,14 @@ typedef enum _RT_802_11_CIPHER_SUITE_TYPE { Cipher_Type_CCMP, Cipher_Type_WEP104 } RT_802_11_CIPHER_SUITE_TYPE, *PRT_802_11_CIPHER_SUITE_TYPE; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ typedef struct { UCHAR Addr[MAC_ADDR_LEN]; - UCHAR ErrorCode[2]; //00 01-Invalid authentication type - //00 02-Authentication timeout - //00 03-Challenge from AP failed - //00 04-Challenge to AP failed + UCHAR ErrorCode[2]; /*00 01-Invalid authentication type */ + /*00 02-Authentication timeout */ + /*00 03-Challenge from AP failed */ + /*00 04-Challenge to AP failed */ BOOLEAN Reported; } ROGUEAP_ENTRY, *PROGUEAP_ENTRY; @@ -705,23 +705,23 @@ typedef struct { ROGUEAP_ENTRY RogueApEntry[MAX_LEN_OF_BSS_TABLE]; } ROGUEAP_TABLE, *PROGUEAP_TABLE; -// -// Cisco IAPP format -// +/* */ +/* Cisco IAPP format */ +/* */ typedef struct _CISCO_IAPP_CONTENT_ { - USHORT Length; //IAPP Length - UCHAR MessageType; //IAPP type - UCHAR FunctionCode; //IAPP function type + USHORT Length; /*IAPP Length */ + UCHAR MessageType; /*IAPP type */ + UCHAR FunctionCode; /*IAPP function type */ UCHAR DestinaionMAC[MAC_ADDR_LEN]; UCHAR SourceMAC[MAC_ADDR_LEN]; - USHORT Tag; //Tag(element IE) - Adjacent AP report - USHORT TagLength; //Length of element not including 4 byte header - UCHAR OUI[4]; //0x00, 0x40, 0x96, 0x00 - UCHAR PreviousAP[MAC_ADDR_LEN]; //MAC Address of access point + USHORT Tag; /*Tag(element IE) - Adjacent AP report */ + USHORT TagLength; /*Length of element not including 4 byte header */ + UCHAR OUI[4]; /*0x00, 0x40, 0x96, 0x00 */ + UCHAR PreviousAP[MAC_ADDR_LEN]; /*MAC Address of access point */ USHORT Channel; USHORT SsidLen; UCHAR Ssid[MAX_LEN_OF_SSID]; - USHORT Seconds; //Seconds that the client has been disassociated. + USHORT Seconds; /*Seconds that the client has been disassociated. */ } CISCO_IAPP_CONTENT, *PCISCO_IAPP_CONTENT; /* @@ -732,55 +732,55 @@ typedef struct _FRAGMENT_FRAME { ULONG RxSize; USHORT Sequence; USHORT LastFrag; - ULONG Flags; // Some extra frame information. bit 0: LLC presented + ULONG Flags; /* Some extra frame information. bit 0: LLC presented */ } FRAGMENT_FRAME, *PFRAGMENT_FRAME; -// -// Packet information for NdisQueryPacket -// +/* */ +/* Packet information for NdisQueryPacket */ +/* */ typedef struct _PACKET_INFO { - UINT PhysicalBufferCount; // Physical breaks of buffer descripor chained - UINT BufferCount; // Number of Buffer descriptor chained - UINT TotalPacketLength; // Self explained - PNDIS_BUFFER pFirstBuffer; // Pointer to first buffer descriptor + UINT PhysicalBufferCount; /* Physical breaks of buffer descripor chained */ + UINT BufferCount; /* Number of Buffer descriptor chained */ + UINT TotalPacketLength; /* Self explained */ + PNDIS_BUFFER pFirstBuffer; /* Pointer to first buffer descriptor */ } PACKET_INFO, *PPACKET_INFO; -// -// Arcfour Structure Added by PaulWu -// +/* */ +/* Arcfour Structure Added by PaulWu */ +/* */ typedef struct _ARCFOUR { UINT X; UINT Y; UCHAR STATE[256]; } ARCFOURCONTEXT, *PARCFOURCONTEXT; -// -// Tkip Key structure which RC4 key & MIC calculation -// +/* */ +/* Tkip Key structure which RC4 key & MIC calculation */ +/* */ typedef struct _TKIP_KEY_INFO { - UINT nBytesInM; // # bytes in M for MICKEY + UINT nBytesInM; /* # bytes in M for MICKEY */ ULONG IV16; ULONG IV32; - ULONG K0; // for MICKEY Low - ULONG K1; // for MICKEY Hig - ULONG L; // Current state for MICKEY - ULONG R; // Current state for MICKEY - ULONG M; // Message accumulator for MICKEY + ULONG K0; /* for MICKEY Low */ + ULONG K1; /* for MICKEY Hig */ + ULONG L; /* Current state for MICKEY */ + ULONG R; /* Current state for MICKEY */ + ULONG M; /* Message accumulator for MICKEY */ UCHAR RC4KEY[16]; UCHAR MIC[8]; } TKIP_KEY_INFO, *PTKIP_KEY_INFO; -// -// Private / Misc data, counters for driver internal use -// +/* */ +/* Private / Misc data, counters for driver internal use */ +/* */ typedef struct __PRIVATE_STRUC { - UINT SystemResetCnt; // System reset counter - UINT TxRingFullCnt; // Tx ring full occurrance number - UINT PhyRxErrCnt; // PHY Rx error count, for debug purpose, might move to global counter - // Variables for WEP encryption / decryption in rtmp_wep.c + UINT SystemResetCnt; /* System reset counter */ + UINT TxRingFullCnt; /* Tx ring full occurrance number */ + UINT PhyRxErrCnt; /* PHY Rx error count, for debug purpose, might move to global counter */ + /* Variables for WEP encryption / decryption in rtmp_wep.c */ UINT FCSCRC32; ARCFOURCONTEXT WEPCONTEXT; - // Tkip stuff + /* Tkip stuff */ TKIP_KEY_INFO Tx; TKIP_KEY_INFO Rx; } PRIVATE_STRUC, *PPRIVATE_STRUC; @@ -788,19 +788,19 @@ typedef struct __PRIVATE_STRUC { /*************************************************************************** * Channel and BBP related data structures **************************************************************************/ -// structure to tune BBP R66 (BBP TUNING) +/* structure to tune BBP R66 (BBP TUNING) */ typedef struct _BBP_R66_TUNING { BOOLEAN bEnable; - USHORT FalseCcaLowerThreshold; // default 100 - USHORT FalseCcaUpperThreshold; // default 512 + USHORT FalseCcaLowerThreshold; /* default 100 */ + USHORT FalseCcaUpperThreshold; /* default 512 */ UCHAR R66Delta; UCHAR R66CurrentValue; - BOOLEAN R66LowerUpperSelect; //Before LinkUp, Used LowerBound or UpperBound as R66 value. + BOOLEAN R66LowerUpperSelect; /*Before LinkUp, Used LowerBound or UpperBound as R66 value. */ } BBP_R66_TUNING, *PBBP_R66_TUNING; -// structure to store channel TX power +/* structure to store channel TX power */ typedef struct _CHANNEL_TX_POWER { - USHORT RemainingTimeForUse; //unit: sec + USHORT RemainingTimeForUse; /*unit: sec */ UCHAR Channel; CHAR Power; CHAR Power2; @@ -808,26 +808,26 @@ typedef struct _CHANNEL_TX_POWER { UCHAR DfsReq; } CHANNEL_TX_POWER, *PCHANNEL_TX_POWER; -// structure to store 802.11j channel TX power +/* structure to store 802.11j channel TX power */ typedef struct _CHANNEL_11J_TX_POWER { UCHAR Channel; - UCHAR BW; // BW_10 or BW_20 + UCHAR BW; /* BW_10 or BW_20 */ CHAR Power; CHAR Power2; - USHORT RemainingTimeForUse; //unit: sec + USHORT RemainingTimeForUse; /*unit: sec */ } CHANNEL_11J_TX_POWER, *PCHANNEL_11J_TX_POWER; typedef struct _SOFT_RX_ANT_DIVERSITY_STRUCT { - UCHAR EvaluatePeriod; // 0:not evalute status, 1: evaluate status, 2: switching status + UCHAR EvaluatePeriod; /* 0:not evalute status, 1: evaluate status, 2: switching status */ UCHAR EvaluateStableCnt; - UCHAR Pair1PrimaryRxAnt; // 0:Ant-E1, 1:Ant-E2 - UCHAR Pair1SecondaryRxAnt; // 0:Ant-E1, 1:Ant-E2 - UCHAR Pair2PrimaryRxAnt; // 0:Ant-E3, 1:Ant-E4 - UCHAR Pair2SecondaryRxAnt; // 0:Ant-E3, 1:Ant-E4 - SHORT Pair1AvgRssi[2]; // AvgRssi[0]:E1, AvgRssi[1]:E2 - SHORT Pair2AvgRssi[2]; // AvgRssi[0]:E3, AvgRssi[1]:E4 - SHORT Pair1LastAvgRssi; // - SHORT Pair2LastAvgRssi; // + UCHAR Pair1PrimaryRxAnt; /* 0:Ant-E1, 1:Ant-E2 */ + UCHAR Pair1SecondaryRxAnt; /* 0:Ant-E1, 1:Ant-E2 */ + UCHAR Pair2PrimaryRxAnt; /* 0:Ant-E3, 1:Ant-E4 */ + UCHAR Pair2SecondaryRxAnt; /* 0:Ant-E3, 1:Ant-E4 */ + SHORT Pair1AvgRssi[2]; /* AvgRssi[0]:E1, AvgRssi[1]:E2 */ + SHORT Pair2AvgRssi[2]; /* AvgRssi[0]:E3, AvgRssi[1]:E4 */ + SHORT Pair1LastAvgRssi; /* */ + SHORT Pair2LastAvgRssi; /* */ ULONG RcvPktNumWhenEvaluate; BOOLEAN FirstPktArrivedWhenEvaluate; RALINK_TIMER_STRUCT RxAntDiversityTimer; @@ -837,19 +837,19 @@ typedef struct _SOFT_RX_ANT_DIVERSITY_STRUCT { * structure for radar detection and channel switch **************************************************************************/ typedef struct _RADAR_DETECT_STRUCT { - //BOOLEAN IEEE80211H; // 0: disable, 1: enable IEEE802.11h - UCHAR CSCount; //Channel switch counter - UCHAR CSPeriod; //Channel switch period (beacon count) - UCHAR RDCount; //Radar detection counter - UCHAR RDMode; //Radar Detection mode - UCHAR RDDurRegion; //Radar detection duration region + /*BOOLEAN IEEE80211H; // 0: disable, 1: enable IEEE802.11h */ + UCHAR CSCount; /*Channel switch counter */ + UCHAR CSPeriod; /*Channel switch period (beacon count) */ + UCHAR RDCount; /*Radar detection counter */ + UCHAR RDMode; /*Radar Detection mode */ + UCHAR RDDurRegion; /*Radar detection duration region */ UCHAR BBPR16; UCHAR BBPR17; UCHAR BBPR18; UCHAR BBPR21; UCHAR BBPR22; UCHAR BBPR64; - ULONG InServiceMonitorCount; // unit: sec + ULONG InServiceMonitorCount; /* unit: sec */ UINT8 DfsSessionTime; BOOLEAN bFastDfs; UINT8 ChMovingTime; @@ -863,25 +863,25 @@ typedef enum _ABGBAND_STATE_ { } ABGBAND_STATE; #ifdef RTMP_MAC_PCI -// Power save method control +/* Power save method control */ typedef union _PS_CONTROL { struct { - ULONG EnablePSinIdle:1; // Enable radio off when not connect to AP. radio on only when sitesurvey, - ULONG EnableNewPS:1; // Enable new Chip power save fucntion . New method can only be applied in chip version after 2872. and PCIe. - ULONG rt30xxPowerMode:2; // Power Level Mode for rt30xx chip - ULONG rt30xxFollowHostASPM:1; // Card Follows Host's setting for rt30xx chip. - ULONG rt30xxForceASPMTest:1; // Force enable L1 for rt30xx chip. This has higher priority than rt30xxFollowHostASPM Mode. - ULONG rsv:26; // Radio Measurement Enable + ULONG EnablePSinIdle:1; /* Enable radio off when not connect to AP. radio on only when sitesurvey, */ + ULONG EnableNewPS:1; /* Enable new Chip power save fucntion . New method can only be applied in chip version after 2872. and PCIe. */ + ULONG rt30xxPowerMode:2; /* Power Level Mode for rt30xx chip */ + ULONG rt30xxFollowHostASPM:1; /* Card Follows Host's setting for rt30xx chip. */ + ULONG rt30xxForceASPMTest:1; /* Force enable L1 for rt30xx chip. This has higher priority than rt30xxFollowHostASPM Mode. */ + ULONG rsv:26; /* Radio Measurement Enable */ } field; ULONG word; } PS_CONTROL, *PPS_CONTROL; -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ /*************************************************************************** * structure for MLME state machine **************************************************************************/ typedef struct _MLME_STRUCT { - // STA state machines + /* STA state machines */ STATE_MACHINE CntlMachine; STATE_MACHINE AssocMachine; STATE_MACHINE AuthMachine; @@ -894,15 +894,15 @@ typedef struct _MLME_STRUCT { STATE_MACHINE_FUNC AuthRspFunc[AUTH_RSP_FUNC_SIZE]; STATE_MACHINE_FUNC SyncFunc[SYNC_FUNC_SIZE]; STATE_MACHINE_FUNC ActFunc[ACT_FUNC_SIZE]; - // Action + /* Action */ STATE_MACHINE ActMachine; - // common WPA state machine + /* common WPA state machine */ STATE_MACHINE WpaMachine; STATE_MACHINE_FUNC WpaFunc[WPA_FUNC_SIZE]; - ULONG ChannelQuality; // 0..100, Channel Quality Indication for Roaming - ULONG Now32; // latch the value of NdisGetSystemUpTime() + ULONG ChannelQuality; /* 0..100, Channel Quality Indication for Roaming */ + ULONG Now32; /* latch the value of NdisGetSystemUpTime() */ ULONG LastSendNULLpsmTime; BOOLEAN bRunning; @@ -919,7 +919,7 @@ typedef struct _MLME_STRUCT { UCHAR bPsPollTimerRunning; RALINK_TIMER_STRUCT PsPollTimer; RALINK_TIMER_STRUCT RadioOnOffTimer; -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ ULONG PeriodicRound; ULONG OneSecPeriodicRound; @@ -931,12 +931,12 @@ typedef struct _MLME_STRUCT { #ifdef RT30xx UCHAR CaliBW40RfR24; UCHAR CaliBW20RfR24; -#endif // RT30xx // +#endif /* RT30xx // */ #ifdef RTMP_MAC_USB RALINK_TIMER_STRUCT AutoWakeupTimer; BOOLEAN AutoWakeupTimerRunning; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ } MLME_STRUCT, *PMLME_STRUCT; /*************************************************************************** @@ -979,7 +979,7 @@ typedef struct _BA_ORI_ENTRY { UCHAR TID; UCHAR BAWinSize; UCHAR Token; -// Sequence is to fill every outgoing QoS DATA frame's sequence field in 802.11 header. +/* Sequence is to fill every outgoing QoS DATA frame's sequence field in 802.11 header. */ USHORT Sequence; USHORT TimeOutValue; ORI_BLOCKACK_STATUS ORI_BA_Status; @@ -990,47 +990,47 @@ typedef struct _BA_ORI_ENTRY { typedef struct _BA_REC_ENTRY { UCHAR Wcid; UCHAR TID; - UCHAR BAWinSize; // 7.3.1.14. each buffer is capable of holding a max AMSDU or MSDU. - //UCHAR NumOfRxPkt; - //UCHAR Curindidx; // the head in the RX reordering buffer + UCHAR BAWinSize; /* 7.3.1.14. each buffer is capable of holding a max AMSDU or MSDU. */ + /*UCHAR NumOfRxPkt; */ + /*UCHAR Curindidx; // the head in the RX reordering buffer */ USHORT LastIndSeq; -// USHORT LastIndSeqAtTimer; +/* USHORT LastIndSeqAtTimer; */ USHORT TimeOutValue; RALINK_TIMER_STRUCT RECBATimer; ULONG LastIndSeqAtTimer; ULONG nDropPacket; ULONG rcvSeq; REC_BLOCKACK_STATUS REC_BA_Status; -// UCHAR RxBufIdxUsed; - // corresponding virtual address for RX reordering packet storage. - //RTMP_REORDERDMABUF MAP_RXBuf[MAX_RX_REORDERBUF]; - NDIS_SPIN_LOCK RxReRingLock; // Rx Ring spinlock -// struct _BA_REC_ENTRY *pNext; +/* UCHAR RxBufIdxUsed; */ + /* corresponding virtual address for RX reordering packet storage. */ + /*RTMP_REORDERDMABUF MAP_RXBuf[MAX_RX_REORDERBUF]; */ + NDIS_SPIN_LOCK RxReRingLock; /* Rx Ring spinlock */ +/* struct _BA_REC_ENTRY *pNext; */ PVOID pAdapter; struct reordering_list list; } BA_REC_ENTRY, *PBA_REC_ENTRY; typedef struct { - ULONG numAsRecipient; // I am recipient of numAsRecipient clients. These client are in the BARecEntry[] - ULONG numAsOriginator; // I am originator of numAsOriginator clients. These clients are in the BAOriEntry[] - ULONG numDoneOriginator; // count Done Originator sessions + ULONG numAsRecipient; /* I am recipient of numAsRecipient clients. These client are in the BARecEntry[] */ + ULONG numAsOriginator; /* I am originator of numAsOriginator clients. These clients are in the BAOriEntry[] */ + ULONG numDoneOriginator; /* count Done Originator sessions */ BA_ORI_ENTRY BAOriEntry[MAX_LEN_OF_BA_ORI_TABLE]; BA_REC_ENTRY BARecEntry[MAX_LEN_OF_BA_REC_TABLE]; } BA_TABLE, *PBA_TABLE; -//For QureyBATableOID use; +/*For QureyBATableOID use; */ typedef struct PACKED _OID_BA_REC_ENTRY { UCHAR MACAddr[MAC_ADDR_LEN]; - UCHAR BaBitmap; // if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize + UCHAR BaBitmap; /* if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize */ UCHAR rsv; UCHAR BufSize[8]; REC_BLOCKACK_STATUS REC_BA_Status[8]; } OID_BA_REC_ENTRY, *POID_BA_REC_ENTRY; -//For QureyBATableOID use; +/*For QureyBATableOID use; */ typedef struct PACKED _OID_BA_ORI_ENTRY { UCHAR MACAddr[MAC_ADDR_LEN]; - UCHAR BaBitmap; // if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize, read ORI_BA_Status[TID] for status + UCHAR BaBitmap; /* if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize, read ORI_BA_Status[TID] for status */ UCHAR rsv; UCHAR BufSize[8]; ORI_BLOCKACK_STATUS ORI_BA_Status[8]; @@ -1039,22 +1039,22 @@ typedef struct PACKED _OID_BA_ORI_ENTRY { typedef struct _QUERYBA_TABLE { OID_BA_ORI_ENTRY BAOriEntry[32]; OID_BA_REC_ENTRY BARecEntry[32]; - UCHAR OriNum; // Number of below BAOriEntry - UCHAR RecNum; // Number of below BARecEntry + UCHAR OriNum; /* Number of below BAOriEntry */ + UCHAR RecNum; /* Number of below BARecEntry */ } QUERYBA_TABLE, *PQUERYBA_TABLE; typedef union _BACAP_STRUC { struct { UINT32 RxBAWinLimit:8; UINT32 TxBAWinLimit:8; - UINT32 AutoBA:1; // automatically BA - UINT32 Policy:2; // 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use + UINT32 AutoBA:1; /* automatically BA */ + UINT32 Policy:2; /* 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use */ UINT32 MpduDensity:3; - UINT32 AmsduEnable:1; //Enable AMSDU transmisstion - UINT32 AmsduSize:1; // 0:3839, 1:7935 bytes. UINT MSDUSizeToBytes[] = { 3839, 7935}; - UINT32 MMPSmode:2; // MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable - UINT32 bHtAdhoc:1; // adhoc can use ht rate. - UINT32 b2040CoexistScanSup:1; //As Sta, support do 2040 coexistence scan for AP. As Ap, support monitor trigger event to check if can use BW 40MHz. + UINT32 AmsduEnable:1; /*Enable AMSDU transmisstion */ + UINT32 AmsduSize:1; /* 0:3839, 1:7935 bytes. UINT MSDUSizeToBytes[] = { 3839, 7935}; */ + UINT32 MMPSmode:2; /* MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable */ + UINT32 bHtAdhoc:1; /* adhoc can use ht rate. */ + UINT32 b2040CoexistScanSup:1; /*As Sta, support do 2040 coexistence scan for AP. As Ap, support monitor trigger event to check if can use BW 40MHz. */ UINT32:4; } field; UINT32 word; @@ -1066,7 +1066,7 @@ typedef struct { UCHAR TID; UCHAR nMSDU; USHORT TimeOut; - BOOLEAN bAllTid; // If True, delete all TID for BA sessions with this MACaddr. + BOOLEAN bAllTid; /* If True, delete all TID for BA sessions with this MACaddr. */ } OID_ADD_BA_ENTRY, *POID_ADD_BA_ENTRY; #define IS_HT_STA(_pMacEntry) \ @@ -1078,11 +1078,11 @@ typedef struct { #define PEER_IS_HT_RATE(_pMacEntry) \ (_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX) -//This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second. (Details see MLMEPeriodic) +/*This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second. (Details see MLMEPeriodic) */ typedef struct _IOT_STRUC { UCHAR Threshold[2]; - UCHAR ReorderTimeOutNum[MAX_LEN_OF_BA_REC_TABLE]; // compare with threshold[0] - UCHAR RefreshNum[MAX_LEN_OF_BA_REC_TABLE]; // compare with threshold[1] + UCHAR ReorderTimeOutNum[MAX_LEN_OF_BA_REC_TABLE]; /* compare with threshold[0] */ + UCHAR RefreshNum[MAX_LEN_OF_BA_REC_TABLE]; /* compare with threshold[1] */ ULONG OneSecInWindowCount; ULONG OneSecFrameDuplicateCount; ULONG OneSecOutWindowCount; @@ -1098,16 +1098,16 @@ typedef struct _IOT_STRUC { BOOLEAN bToggle; } IOT_STRUC, *PIOT_STRUC; -// This is the registry setting for 802.11n transmit setting. Used in advanced page. +/* This is the registry setting for 802.11n transmit setting. Used in advanced page. */ typedef union _REG_TRANSMIT_SETTING { struct { - //UINT32 PhyMode:4; - //UINT32 MCS:7; // MCS + /*UINT32 PhyMode:4; */ + /*UINT32 MCS:7; // MCS */ UINT32 rsv0:10; UINT32 TxBF:1; - UINT32 BW:1; //channel bandwidth 20MHz or 40 MHz + UINT32 BW:1; /*channel bandwidth 20MHz or 40 MHz */ UINT32 ShortGI:1; - UINT32 STBC:1; //SPACE + UINT32 STBC:1; /*SPACE */ UINT32 TRANSNO:2; UINT32 HTMODE:1; UINT32 EXTCHA:2; @@ -1118,9 +1118,9 @@ typedef union _REG_TRANSMIT_SETTING { typedef union _DESIRED_TRANSMIT_SETTING { struct { - USHORT MCS:7; // MCS + USHORT MCS:7; /* MCS */ USHORT PhyMode:4; - USHORT FixedTxMode:2; // If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode. + USHORT FixedTxMode:2; /* If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode. */ USHORT rsv:3; } field; USHORT word; @@ -1136,11 +1136,11 @@ typedef struct _BEACON_SYNC_STRUCT_ { UCHAR BeaconTxWI[HW_BEACON_MAX_COUNT][TXWI_SIZE]; ULONG TimIELocationInBeacon[HW_BEACON_MAX_COUNT]; ULONG CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT]; - BOOLEAN EnableBeacon; // trigger to enable beacon transmission. - UCHAR BeaconBitMap; // NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. - UCHAR DtimBitOn; // NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. + BOOLEAN EnableBeacon; /* trigger to enable beacon transmission. */ + UCHAR BeaconBitMap; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */ + UCHAR DtimBitOn; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */ } BEACON_SYNC_STRUCT; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ /*************************************************************************** * Multiple SSID related data structures @@ -1168,39 +1168,39 @@ typedef struct _BEACON_SYNC_STRUCT_ { UCHAR bit_offset = wcid & 0x7; \ ad_p->ApCfg.MBSSID[apidx].TimBitmaps[tim_offset] |= BIT8[bit_offset]; } -// configuration common to OPMODE_AP as well as OPMODE_STA +/* configuration common to OPMODE_AP as well as OPMODE_STA */ typedef struct _COMMON_CONFIG { BOOLEAN bCountryFlag; UCHAR CountryCode[3]; UCHAR Geography; - UCHAR CountryRegion; // Enum of country region, 0:FCC, 1:IC, 2:ETSI, 3:SPAIN, 4:France, 5:MKK, 6:MKK1, 7:Israel - UCHAR CountryRegionForABand; // Enum of country region for A band - UCHAR PhyMode; // PHY_11A, PHY_11B, PHY_11BG_MIXED, PHY_ABG_MIXED - USHORT Dsifs; // in units of usec - ULONG PacketFilter; // Packet filter for receiving + UCHAR CountryRegion; /* Enum of country region, 0:FCC, 1:IC, 2:ETSI, 3:SPAIN, 4:France, 5:MKK, 6:MKK1, 7:Israel */ + UCHAR CountryRegionForABand; /* Enum of country region for A band */ + UCHAR PhyMode; /* PHY_11A, PHY_11B, PHY_11BG_MIXED, PHY_ABG_MIXED */ + USHORT Dsifs; /* in units of usec */ + ULONG PacketFilter; /* Packet filter for receiving */ UINT8 RegulatoryClass; - CHAR Ssid[MAX_LEN_OF_SSID]; // NOT NULL-terminated - UCHAR SsidLen; // the actual ssid length in used - UCHAR LastSsidLen; // the actual ssid length in used - CHAR LastSsid[MAX_LEN_OF_SSID]; // NOT NULL-terminated + CHAR Ssid[MAX_LEN_OF_SSID]; /* NOT NULL-terminated */ + UCHAR SsidLen; /* the actual ssid length in used */ + UCHAR LastSsidLen; /* the actual ssid length in used */ + CHAR LastSsid[MAX_LEN_OF_SSID]; /* NOT NULL-terminated */ UCHAR LastBssid[MAC_ADDR_LEN]; UCHAR Bssid[MAC_ADDR_LEN]; USHORT BeaconPeriod; UCHAR Channel; - UCHAR CentralChannel; // Central Channel when using 40MHz is indicating. not real channel. + UCHAR CentralChannel; /* Central Channel when using 40MHz is indicating. not real channel. */ UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES]; UCHAR SupRateLen; UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES]; UCHAR ExtRateLen; - UCHAR DesireRate[MAX_LEN_OF_SUPPORTED_RATES]; // OID_802_11_DESIRED_RATES + UCHAR DesireRate[MAX_LEN_OF_SUPPORTED_RATES]; /* OID_802_11_DESIRED_RATES */ UCHAR MaxDesiredRate; UCHAR ExpectedACKRate[MAX_LEN_OF_SUPPORTED_RATES]; - ULONG BasicRateBitmap; // backup basic ratebitmap + ULONG BasicRateBitmap; /* backup basic ratebitmap */ BOOLEAN bAPSDCapable; BOOLEAN bInServicePeriod; @@ -1216,83 +1216,83 @@ typedef struct _COMMON_CONFIG { BOOLEAN bACMAPSDTr[4]; /* no use */ BOOLEAN bNeedSendTriggerFrame; - BOOLEAN bAPSDForcePowerSave; // Force power save mode, should only use in APSD-STAUT + BOOLEAN bAPSDForcePowerSave; /* Force power save mode, should only use in APSD-STAUT */ ULONG TriggerTimerCount; UCHAR MaxSPLength; - UCHAR BBPCurrentBW; // BW_10, BW_20, BW_40 - // move to MULTISSID_STRUCT for MBSS - //HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI. - REG_TRANSMIT_SETTING RegTransmitSetting; //registry transmit setting. this is for reading registry setting only. not useful. - //UCHAR FixedTxMode; // Fixed Tx Mode (CCK, OFDM), for HT fixed tx mode (GF, MIX) , refer to RegTransmitSetting.field.HTMode - UCHAR TxRate; // Same value to fill in TXD. TxRate is 6-bit - UCHAR MaxTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11 - UCHAR TxRateIndex; // Tx rate index in RateSwitchTable - UCHAR TxRateTableSize; // Valid Tx rate table size in RateSwitchTable - //BOOLEAN bAutoTxRateSwitch; - UCHAR MinTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11 - UCHAR RtsRate; // RATE_xxx - HTTRANSMIT_SETTING MlmeTransmit; // MGMT frame PHY rate setting when operatin at Ht rate. - UCHAR MlmeRate; // RATE_xxx, used to send MLME frames - UCHAR BasicMlmeRate; // Default Rate for sending MLME frames - - USHORT RtsThreshold; // in unit of BYTE - USHORT FragmentThreshold; // in unit of BYTE - - UCHAR TxPower; // in unit of mW - ULONG TxPowerPercentage; // 0~100 % - ULONG TxPowerDefault; // keep for TxPowerPercentage + UCHAR BBPCurrentBW; /* BW_10, BW_20, BW_40 */ + /* move to MULTISSID_STRUCT for MBSS */ + /*HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI. */ + REG_TRANSMIT_SETTING RegTransmitSetting; /*registry transmit setting. this is for reading registry setting only. not useful. */ + /*UCHAR FixedTxMode; // Fixed Tx Mode (CCK, OFDM), for HT fixed tx mode (GF, MIX) , refer to RegTransmitSetting.field.HTMode */ + UCHAR TxRate; /* Same value to fill in TXD. TxRate is 6-bit */ + UCHAR MaxTxRate; /* RATE_1, RATE_2, RATE_5_5, RATE_11 */ + UCHAR TxRateIndex; /* Tx rate index in RateSwitchTable */ + UCHAR TxRateTableSize; /* Valid Tx rate table size in RateSwitchTable */ + /*BOOLEAN bAutoTxRateSwitch; */ + UCHAR MinTxRate; /* RATE_1, RATE_2, RATE_5_5, RATE_11 */ + UCHAR RtsRate; /* RATE_xxx */ + HTTRANSMIT_SETTING MlmeTransmit; /* MGMT frame PHY rate setting when operatin at Ht rate. */ + UCHAR MlmeRate; /* RATE_xxx, used to send MLME frames */ + UCHAR BasicMlmeRate; /* Default Rate for sending MLME frames */ + + USHORT RtsThreshold; /* in unit of BYTE */ + USHORT FragmentThreshold; /* in unit of BYTE */ + + UCHAR TxPower; /* in unit of mW */ + ULONG TxPowerPercentage; /* 0~100 % */ + ULONG TxPowerDefault; /* keep for TxPowerPercentage */ UINT8 PwrConstraint; - BACAP_STRUC BACapability; // NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0 - BACAP_STRUC REGBACapability; // NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0 + BACAP_STRUC BACapability; /* NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0 */ + BACAP_STRUC REGBACapability; /* NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0 */ - IOT_STRUC IOTestParm; // 802.11n InterOpbility Test Parameter; - ULONG TxPreamble; // Rt802_11PreambleLong, Rt802_11PreambleShort, Rt802_11PreambleAuto - BOOLEAN bUseZeroToDisableFragment; // Microsoft use 0 as disable - ULONG UseBGProtection; // 0: auto, 1: always use, 2: always not use - BOOLEAN bUseShortSlotTime; // 0: disable, 1 - use short slot (9us) - BOOLEAN bEnableTxBurst; // 1: enble TX PACKET BURST (when BA is established or AP is not a legacy WMM AP), 0: disable TX PACKET BURST - BOOLEAN bAggregationCapable; // 1: enable TX aggregation when the peer supports it - BOOLEAN bPiggyBackCapable; // 1: enable TX piggy-back according MAC's version - BOOLEAN bIEEE80211H; // 1: enable IEEE802.11h spec. - ULONG DisableOLBCDetect; // 0: enable OLBC detect; 1 disable OLBC detect + IOT_STRUC IOTestParm; /* 802.11n InterOpbility Test Parameter; */ + ULONG TxPreamble; /* Rt802_11PreambleLong, Rt802_11PreambleShort, Rt802_11PreambleAuto */ + BOOLEAN bUseZeroToDisableFragment; /* Microsoft use 0 as disable */ + ULONG UseBGProtection; /* 0: auto, 1: always use, 2: always not use */ + BOOLEAN bUseShortSlotTime; /* 0: disable, 1 - use short slot (9us) */ + BOOLEAN bEnableTxBurst; /* 1: enble TX PACKET BURST (when BA is established or AP is not a legacy WMM AP), 0: disable TX PACKET BURST */ + BOOLEAN bAggregationCapable; /* 1: enable TX aggregation when the peer supports it */ + BOOLEAN bPiggyBackCapable; /* 1: enable TX piggy-back according MAC's version */ + BOOLEAN bIEEE80211H; /* 1: enable IEEE802.11h spec. */ + ULONG DisableOLBCDetect; /* 0: enable OLBC detect; 1 disable OLBC detect */ BOOLEAN bRdg; - BOOLEAN bWmmCapable; // 0:disable WMM, 1:enable WMM - QOS_CAPABILITY_PARM APQosCapability; // QOS capability of the current associated AP - EDCA_PARM APEdcaParm; // EDCA parameters of the current associated AP - QBSS_LOAD_PARM APQbssLoad; // QBSS load of the current associated AP - UCHAR AckPolicy[4]; // ACK policy of the specified AC. see ACK_xxx - BOOLEAN bDLSCapable; // 0:disable DLS, 1:enable DLS - // a bitmap of BOOLEAN flags. each bit represent an operation status of a particular - // BOOLEAN control, either ON or OFF. These flags should always be accessed via - // OPSTATUS_TEST_FLAG(), OPSTATUS_SET_FLAG(), OP_STATUS_CLEAR_FLAG() macros. - // see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition + BOOLEAN bWmmCapable; /* 0:disable WMM, 1:enable WMM */ + QOS_CAPABILITY_PARM APQosCapability; /* QOS capability of the current associated AP */ + EDCA_PARM APEdcaParm; /* EDCA parameters of the current associated AP */ + QBSS_LOAD_PARM APQbssLoad; /* QBSS load of the current associated AP */ + UCHAR AckPolicy[4]; /* ACK policy of the specified AC. see ACK_xxx */ + BOOLEAN bDLSCapable; /* 0:disable DLS, 1:enable DLS */ + /* a bitmap of BOOLEAN flags. each bit represent an operation status of a particular */ + /* BOOLEAN control, either ON or OFF. These flags should always be accessed via */ + /* OPSTATUS_TEST_FLAG(), OPSTATUS_SET_FLAG(), OP_STATUS_CLEAR_FLAG() macros. */ + /* see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition */ ULONG OpStatusFlags; - BOOLEAN NdisRadioStateOff; //For HCT 12.0, set this flag to TRUE instead of called MlmeRadioOff. - ABGBAND_STATE BandState; // For setting BBP used on B/G or A mode. + BOOLEAN NdisRadioStateOff; /*For HCT 12.0, set this flag to TRUE instead of called MlmeRadioOff. */ + ABGBAND_STATE BandState; /* For setting BBP used on B/G or A mode. */ - // IEEE802.11H--DFS. + /* IEEE802.11H--DFS. */ RADAR_DETECT_STRUCT RadarDetect; - // HT - UCHAR BASize; // USer desired BAWindowSize. Should not exceed our max capability - //RT_HT_CAPABILITY SupportedHtPhy; + /* HT */ + UCHAR BASize; /* USer desired BAWindowSize. Should not exceed our max capability */ + /*RT_HT_CAPABILITY SupportedHtPhy; */ RT_HT_CAPABILITY DesiredHtPhy; HT_CAPABILITY_IE HtCapability; - ADD_HT_INFO_IE AddHTInfo; // Useful as AP. - //This IE is used with channel switch announcement element when changing to a new 40MHz. - //This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp. - NEW_EXT_CHAN_IE NewExtChanOffset; //7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present + ADD_HT_INFO_IE AddHTInfo; /* Useful as AP. */ + /*This IE is used with channel switch announcement element when changing to a new 40MHz. */ + /*This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp. */ + NEW_EXT_CHAN_IE NewExtChanOffset; /*7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present */ BOOLEAN bHTProtect; BOOLEAN bMIMOPSEnable; BOOLEAN bBADecline; -//2008/11/05: KH add to support Antenna power-saving of AP<-- +/*2008/11/05: KH add to support Antenna power-saving of AP<-- */ BOOLEAN bGreenAPEnable; -//2008/11/05: KH add to support Antenna power-saving of AP--> +/*2008/11/05: KH add to support Antenna power-saving of AP--> */ BOOLEAN bDisableReordering; BOOLEAN bForty_Mhz_Intolerant; BOOLEAN bExtChannelSwitchAnnouncement; @@ -1301,19 +1301,19 @@ typedef struct _COMMON_CONFIG { UCHAR TxBASize; - // Enable wireless event + /* Enable wireless event */ BOOLEAN bWirelessEvent; - BOOLEAN bWiFiTest; // Enable this parameter for WiFi test + BOOLEAN bWiFiTest; /* Enable this parameter for WiFi test */ - // Tx & Rx Stream number selection + /* Tx & Rx Stream number selection */ UCHAR TxStream; UCHAR RxStream; - BOOLEAN bHardwareRadio; // Hardware controlled Radio enabled + BOOLEAN bHardwareRadio; /* Hardware controlled Radio enabled */ #ifdef RTMP_MAC_USB - BOOLEAN bMultipleIRP; // Multiple Bulk IN flag - UCHAR NumOfBulkInIRP; // if bMultipleIRP == TRUE, NumOfBulkInIRP will be 4 otherwise be 1 + BOOLEAN bMultipleIRP; /* Multiple Bulk IN flag */ + UCHAR NumOfBulkInIRP; /* if bMultipleIRP == TRUE, NumOfBulkInIRP will be 4 otherwise be 1 */ RT_HT_CAPABILITY SupportedHtPhy; ULONG MaxPktOneTxBulk; UCHAR TxBulkFactor; @@ -1325,7 +1325,7 @@ typedef struct _COMMON_CONFIG { UINT32 BeaconAdjust; UINT32 BeaconFactor; UINT32 BeaconRemain; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ NDIS_SPIN_LOCK MeasureReqTabLock; PMEASURE_REQ_TAB pMeasureReqTab; @@ -1333,10 +1333,10 @@ typedef struct _COMMON_CONFIG { NDIS_SPIN_LOCK TpcReqTabLock; PTPC_REQ_TAB pTpcReqTab; - BOOLEAN PSPXlink; // 0: Disable. 1: Enable + BOOLEAN PSPXlink; /* 0: Disable. 1: Enable */ #if defined(RT305x)||defined(RT30xx) - // request by Gary, for High Power issue + /* request by Gary, for High Power issue */ UCHAR HighPowerPatchDisabled; #endif @@ -1344,33 +1344,33 @@ typedef struct _COMMON_CONFIG { } COMMON_CONFIG, *PCOMMON_CONFIG; /* Modified by Wu Xi-Kun 4/21/2006 */ -// STA configuration and status +/* STA configuration and status */ typedef struct _STA_ADMIN_CONFIG { - // GROUP 1 - - // User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe - // the user intended configuration, but not necessary fully equal to the final - // settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either - // AP or IBSS holder). - // Once initialized, user configuration can only be changed via OID_xxx - UCHAR BssType; // BSS_INFRA or BSS_ADHOC - USHORT AtimWin; // used when starting a new IBSS - - // GROUP 2 - - // User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe - // the user intended configuration, and should be always applied to the final - // settings in ACTIVE BSS without compromising with the BSS holder. - // Once initialized, user configuration can only be changed via OID_xxx + /* GROUP 1 - */ + /* User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe */ + /* the user intended configuration, but not necessary fully equal to the final */ + /* settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either */ + /* AP or IBSS holder). */ + /* Once initialized, user configuration can only be changed via OID_xxx */ + UCHAR BssType; /* BSS_INFRA or BSS_ADHOC */ + USHORT AtimWin; /* used when starting a new IBSS */ + + /* GROUP 2 - */ + /* User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe */ + /* the user intended configuration, and should be always applied to the final */ + /* settings in ACTIVE BSS without compromising with the BSS holder. */ + /* Once initialized, user configuration can only be changed via OID_xxx */ UCHAR RssiTrigger; - UCHAR RssiTriggerMode; // RSSI_TRIGGERED_UPON_BELOW_THRESHOLD or RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD - USHORT DefaultListenCount; // default listen count; - ULONG WindowsPowerMode; // Power mode for AC power - ULONG WindowsBatteryPowerMode; // Power mode for battery if exists - BOOLEAN bWindowsACCAMEnable; // Enable CAM power mode when AC on - BOOLEAN bAutoReconnect; // Set to TRUE when setting OID_802_11_SSID with no matching BSSID - ULONG WindowsPowerProfile; // Windows power profile, for NDIS5.1 PnP - - // MIB:ieee802dot11.dot11smt(1).dot11StationConfigTable(1) - USHORT Psm; // power management mode (PWR_ACTIVE|PWR_SAVE) + UCHAR RssiTriggerMode; /* RSSI_TRIGGERED_UPON_BELOW_THRESHOLD or RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD */ + USHORT DefaultListenCount; /* default listen count; */ + ULONG WindowsPowerMode; /* Power mode for AC power */ + ULONG WindowsBatteryPowerMode; /* Power mode for battery if exists */ + BOOLEAN bWindowsACCAMEnable; /* Enable CAM power mode when AC on */ + BOOLEAN bAutoReconnect; /* Set to TRUE when setting OID_802_11_SSID with no matching BSSID */ + ULONG WindowsPowerProfile; /* Windows power profile, for NDIS5.1 PnP */ + + /* MIB:ieee802dot11.dot11smt(1).dot11StationConfigTable(1) */ + USHORT Psm; /* power management mode (PWR_ACTIVE|PWR_SAVE) */ USHORT DisassocReason; UCHAR DisassocSta[MAC_ADDR_LEN]; USHORT DeauthReason; @@ -1378,109 +1378,109 @@ typedef struct _STA_ADMIN_CONFIG { USHORT AuthFailReason; UCHAR AuthFailSta[MAC_ADDR_LEN]; - NDIS_802_11_PRIVACY_FILTER PrivacyFilter; // PrivacyFilter enum for 802.1X - NDIS_802_11_AUTHENTICATION_MODE AuthMode; // This should match to whatever microsoft defined + NDIS_802_11_PRIVACY_FILTER PrivacyFilter; /* PrivacyFilter enum for 802.1X */ + NDIS_802_11_AUTHENTICATION_MODE AuthMode; /* This should match to whatever microsoft defined */ NDIS_802_11_WEP_STATUS WepStatus; - NDIS_802_11_WEP_STATUS OrigWepStatus; // Original wep status set from OID + NDIS_802_11_WEP_STATUS OrigWepStatus; /* Original wep status set from OID */ - // Add to support different cipher suite for WPA2/WPA mode - NDIS_802_11_ENCRYPTION_STATUS GroupCipher; // Multicast cipher suite - NDIS_802_11_ENCRYPTION_STATUS PairCipher; // Unicast cipher suite - BOOLEAN bMixCipher; // Indicate current Pair & Group use different cipher suites + /* Add to support different cipher suite for WPA2/WPA mode */ + NDIS_802_11_ENCRYPTION_STATUS GroupCipher; /* Multicast cipher suite */ + NDIS_802_11_ENCRYPTION_STATUS PairCipher; /* Unicast cipher suite */ + BOOLEAN bMixCipher; /* Indicate current Pair & Group use different cipher suites */ USHORT RsnCapability; NDIS_802_11_WEP_STATUS GroupKeyWepStatus; - UCHAR WpaPassPhrase[64]; // WPA PSK pass phrase - UINT WpaPassPhraseLen; // the length of WPA PSK pass phrase - UCHAR PMK[32]; // WPA PSK mode PMK - UCHAR PTK[64]; // WPA PSK mode PTK - UCHAR GTK[32]; // GTK from authenticator + UCHAR WpaPassPhrase[64]; /* WPA PSK pass phrase */ + UINT WpaPassPhraseLen; /* the length of WPA PSK pass phrase */ + UCHAR PMK[32]; /* WPA PSK mode PMK */ + UCHAR PTK[64]; /* WPA PSK mode PTK */ + UCHAR GTK[32]; /* GTK from authenticator */ BSSID_INFO SavedPMK[PMKID_NO]; - UINT SavedPMKNum; // Saved PMKID number + UINT SavedPMKNum; /* Saved PMKID number */ UCHAR DefaultKeyId; - // WPA 802.1x port control, WPA_802_1X_PORT_SECURED, WPA_802_1X_PORT_NOT_SECURED + /* WPA 802.1x port control, WPA_802_1X_PORT_SECURED, WPA_802_1X_PORT_NOT_SECURED */ UCHAR PortSecured; - // For WPA countermeasures - ULONG LastMicErrorTime; // record last MIC error time - ULONG MicErrCnt; // Should be 0, 1, 2, then reset to zero (after disassoiciation). - BOOLEAN bBlockAssoc; // Block associate attempt for 60 seconds after counter measure occurred. - // For WPA-PSK supplicant state - WPA_STATE WpaState; // Default is SS_NOTUSE and handled by microsoft 802.1x + /* For WPA countermeasures */ + ULONG LastMicErrorTime; /* record last MIC error time */ + ULONG MicErrCnt; /* Should be 0, 1, 2, then reset to zero (after disassoiciation). */ + BOOLEAN bBlockAssoc; /* Block associate attempt for 60 seconds after counter measure occurred. */ + /* For WPA-PSK supplicant state */ + WPA_STATE WpaState; /* Default is SS_NOTUSE and handled by microsoft 802.1x */ UCHAR ReplayCounter[8]; - UCHAR ANonce[32]; // ANonce for WPA-PSK from aurhenticator - UCHAR SNonce[32]; // SNonce for WPA-PSK + UCHAR ANonce[32]; /* ANonce for WPA-PSK from aurhenticator */ + UCHAR SNonce[32]; /* SNonce for WPA-PSK */ - UCHAR LastSNR0; // last received BEACON's SNR - UCHAR LastSNR1; // last received BEACON's SNR for 2nd antenna + UCHAR LastSNR0; /* last received BEACON's SNR */ + UCHAR LastSNR1; /* last received BEACON's SNR for 2nd antenna */ RSSI_SAMPLE RssiSample; ULONG NumOfAvgRssiSample; - ULONG LastBeaconRxTime; // OS's timestamp of the last BEACON RX time - ULONG Last11bBeaconRxTime; // OS's timestamp of the last 11B BEACON RX time - ULONG Last11gBeaconRxTime; // OS's timestamp of the last 11G BEACON RX time - ULONG Last20NBeaconRxTime; // OS's timestamp of the last 20MHz N BEACON RX time - - ULONG LastScanTime; // Record last scan time for issue BSSID_SCAN_LIST - ULONG ScanCnt; // Scan counts since most recent SSID, BSSID, SCAN OID request - BOOLEAN bSwRadio; // Software controlled Radio On/Off, TRUE: On - BOOLEAN bHwRadio; // Hardware controlled Radio On/Off, TRUE: On - BOOLEAN bRadio; // Radio state, And of Sw & Hw radio state - BOOLEAN bHardwareRadio; // Hardware controlled Radio enabled - BOOLEAN bShowHiddenSSID; // Show all known SSID in SSID list get operation - - // New for WPA, windows want us to keep association information and - // Fixed IEs from last association response + ULONG LastBeaconRxTime; /* OS's timestamp of the last BEACON RX time */ + ULONG Last11bBeaconRxTime; /* OS's timestamp of the last 11B BEACON RX time */ + ULONG Last11gBeaconRxTime; /* OS's timestamp of the last 11G BEACON RX time */ + ULONG Last20NBeaconRxTime; /* OS's timestamp of the last 20MHz N BEACON RX time */ + + ULONG LastScanTime; /* Record last scan time for issue BSSID_SCAN_LIST */ + ULONG ScanCnt; /* Scan counts since most recent SSID, BSSID, SCAN OID request */ + BOOLEAN bSwRadio; /* Software controlled Radio On/Off, TRUE: On */ + BOOLEAN bHwRadio; /* Hardware controlled Radio On/Off, TRUE: On */ + BOOLEAN bRadio; /* Radio state, And of Sw & Hw radio state */ + BOOLEAN bHardwareRadio; /* Hardware controlled Radio enabled */ + BOOLEAN bShowHiddenSSID; /* Show all known SSID in SSID list get operation */ + + /* New for WPA, windows want us to keep association information and */ + /* Fixed IEs from last association response */ NDIS_802_11_ASSOCIATION_INFORMATION AssocInfo; - USHORT ReqVarIELen; // Length of next VIE include EID & Length - UCHAR ReqVarIEs[MAX_VIE_LEN]; // The content saved here should be little-endian format. - USHORT ResVarIELen; // Length of next VIE include EID & Length + USHORT ReqVarIELen; /* Length of next VIE include EID & Length */ + UCHAR ReqVarIEs[MAX_VIE_LEN]; /* The content saved here should be little-endian format. */ + USHORT ResVarIELen; /* Length of next VIE include EID & Length */ UCHAR ResVarIEs[MAX_VIE_LEN]; UCHAR RSNIE_Len; - UCHAR RSN_IE[MAX_LEN_OF_RSNIE]; // The content saved here should be little-endian format. - - ULONG CLBusyBytes; // Save the total bytes received durning channel load scan time - USHORT RPIDensity[8]; // Array for RPI density collection - - UCHAR RMReqCnt; // Number of measurement request saved. - UCHAR CurrentRMReqIdx; // Number of measurement request saved. - BOOLEAN ParallelReq; // Parallel measurement, only one request performed, - // It must be the same channel with maximum duration - USHORT ParallelDuration; // Maximum duration for parallel measurement - UCHAR ParallelChannel; // Only one channel with parallel measurement - USHORT IAPPToken; // IAPP dialog token - // Hack for channel load and noise histogram parameters - UCHAR NHFactor; // Parameter for Noise histogram - UCHAR CLFactor; // Parameter for channel load + UCHAR RSN_IE[MAX_LEN_OF_RSNIE]; /* The content saved here should be little-endian format. */ + + ULONG CLBusyBytes; /* Save the total bytes received durning channel load scan time */ + USHORT RPIDensity[8]; /* Array for RPI density collection */ + + UCHAR RMReqCnt; /* Number of measurement request saved. */ + UCHAR CurrentRMReqIdx; /* Number of measurement request saved. */ + BOOLEAN ParallelReq; /* Parallel measurement, only one request performed, */ + /* It must be the same channel with maximum duration */ + USHORT ParallelDuration; /* Maximum duration for parallel measurement */ + UCHAR ParallelChannel; /* Only one channel with parallel measurement */ + USHORT IAPPToken; /* IAPP dialog token */ + /* Hack for channel load and noise histogram parameters */ + UCHAR NHFactor; /* Parameter for Noise histogram */ + UCHAR CLFactor; /* Parameter for channel load */ RALINK_TIMER_STRUCT StaQuickResponeForRateUpTimer; BOOLEAN StaQuickResponeForRateUpTimerRunning; - UCHAR DtimCount; // 0.. DtimPeriod-1 - UCHAR DtimPeriod; // default = 3 + UCHAR DtimCount; /* 0.. DtimPeriod-1 */ + UCHAR DtimPeriod; /* default = 3 */ - //////////////////////////////////////////////////////////////////////////////////////// - // This is only for WHQL test. + /*////////////////////////////////////////////////////////////////////////////////////// */ + /* This is only for WHQL test. */ BOOLEAN WhqlTest; - //////////////////////////////////////////////////////////////////////////////////////// + /*////////////////////////////////////////////////////////////////////////////////////// */ RALINK_TIMER_STRUCT WpaDisassocAndBlockAssocTimer; - // Fast Roaming - BOOLEAN bAutoRoaming; // 0:disable auto roaming by RSSI, 1:enable auto roaming by RSSI - CHAR dBmToRoam; // the condition to roam when receiving Rssi less than this value. It's negative value. + /* Fast Roaming */ + BOOLEAN bAutoRoaming; /* 0:disable auto roaming by RSSI, 1:enable auto roaming by RSSI */ + CHAR dBmToRoam; /* the condition to roam when receiving Rssi less than this value. It's negative value. */ BOOLEAN IEEE8021X; BOOLEAN IEEE8021x_required_keys; - CIPHER_KEY DesireSharedKey[4]; // Record user desired WEP keys + CIPHER_KEY DesireSharedKey[4]; /* Record user desired WEP keys */ UCHAR DesireSharedKeyId; - // 0: driver ignores wpa_supplicant - // 1: wpa_supplicant initiates scanning and AP selection - // 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters + /* 0: driver ignores wpa_supplicant */ + /* 1: wpa_supplicant initiates scanning and AP selection */ + /* 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters */ UCHAR WpaSupplicantUP; UCHAR WpaSupplicantScanCount; BOOLEAN bRSN_IE_FromWpaSupplicant; @@ -1491,63 +1491,63 @@ typedef struct _STA_ADMIN_CONFIG { BOOLEAN bTGnWifiTest; BOOLEAN bScanReqIsFromWebUI; - HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode; // For transmit phy setting in TXWI. + HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode; /* For transmit phy setting in TXWI. */ DESIRED_TRANSMIT_SETTING DesiredTransmitSetting; RT_HT_PHY_INFO DesiredHtPhyInfo; BOOLEAN bAutoTxRateSwitch; #ifdef RTMP_MAC_PCI UCHAR BBPR3; - // PS Control has 2 meanings for advanced power save function. - // 1. EnablePSinIdle : When no connection, always radio off except need to do site survey. - // 2. EnableNewPS : will save more current in sleep or radio off mode. + /* PS Control has 2 meanings for advanced power save function. */ + /* 1. EnablePSinIdle : When no connection, always radio off except need to do site survey. */ + /* 2. EnableNewPS : will save more current in sleep or radio off mode. */ PS_CONTROL PSControl; -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ BOOLEAN bAutoConnectByBssid; - ULONG BeaconLostTime; // seconds - BOOLEAN bForceTxBurst; // 1: force enble TX PACKET BURST, 0: disable + ULONG BeaconLostTime; /* seconds */ + BOOLEAN bForceTxBurst; /* 1: force enble TX PACKET BURST, 0: disable */ } STA_ADMIN_CONFIG, *PSTA_ADMIN_CONFIG; -// This data structure keep the current active BSS/IBSS's configuration that this STA -// had agreed upon joining the network. Which means these parameters are usually decided -// by the BSS/IBSS creator instead of user configuration. Data in this data structurre -// is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE. -// Normally, after SCAN or failed roaming attempts, we need to recover back to -// the current active settings. +/* This data structure keep the current active BSS/IBSS's configuration that this STA */ +/* had agreed upon joining the network. Which means these parameters are usually decided */ +/* by the BSS/IBSS creator instead of user configuration. Data in this data structurre */ +/* is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE. */ +/* Normally, after SCAN or failed roaming attempts, we need to recover back to */ +/* the current active settings. */ typedef struct _STA_ACTIVE_CONFIG { USHORT Aid; - USHORT AtimWin; // in kusec; IBSS parameter set element + USHORT AtimWin; /* in kusec; IBSS parameter set element */ USHORT CapabilityInfo; USHORT CfpMaxDuration; USHORT CfpPeriod; - // Copy supported rate from desired AP's beacon. We are trying to match - // AP's supported and extended rate settings. + /* Copy supported rate from desired AP's beacon. We are trying to match */ + /* AP's supported and extended rate settings. */ UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES]; UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES]; UCHAR SupRateLen; UCHAR ExtRateLen; - // Copy supported ht from desired AP's beacon. We are trying to match + /* Copy supported ht from desired AP's beacon. We are trying to match */ RT_HT_PHY_INFO SupportedPhyInfo; RT_HT_CAPABILITY SupportedHtPhy; } STA_ACTIVE_CONFIG, *PSTA_ACTIVE_CONFIG; typedef struct _MAC_TABLE_ENTRY { - //Choose 1 from ValidAsWDS and ValidAsCLI to validize. - BOOLEAN ValidAsCLI; // Sta mode, set this TRUE after Linkup,too. - BOOLEAN ValidAsWDS; // This is WDS Entry. only for AP mode. - BOOLEAN ValidAsApCli; //This is a AP-Client entry, only for AP mode which enable AP-Client functions. + /*Choose 1 from ValidAsWDS and ValidAsCLI to validize. */ + BOOLEAN ValidAsCLI; /* Sta mode, set this TRUE after Linkup,too. */ + BOOLEAN ValidAsWDS; /* This is WDS Entry. only for AP mode. */ + BOOLEAN ValidAsApCli; /*This is a AP-Client entry, only for AP mode which enable AP-Client functions. */ BOOLEAN ValidAsMesh; - BOOLEAN ValidAsDls; // This is DLS Entry. only for STA mode. + BOOLEAN ValidAsDls; /* This is DLS Entry. only for STA mode. */ BOOLEAN isCached; - BOOLEAN bIAmBadAtheros; // Flag if this is Atheros chip that has IOT problem. We need to turn on RTS/CTS protection. + BOOLEAN bIAmBadAtheros; /* Flag if this is Atheros chip that has IOT problem. We need to turn on RTS/CTS protection. */ - UCHAR EnqueueEapolStartTimerRunning; // Enqueue EAPoL-Start for triggering EAP SM - //jan for wpa - // record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB + UCHAR EnqueueEapolStartTimerRunning; /* Enqueue EAPoL-Start for triggering EAP SM */ + /*jan for wpa */ + /* record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB */ UCHAR CMTimerRunning; - UCHAR apidx; // MBSS number + UCHAR apidx; /* MBSS number */ UCHAR RSNIE_Len; UCHAR RSN_IE[MAX_LEN_OF_RSNIE]; UCHAR ANonce[LEN_KEY_DESC_NONCE]; @@ -1556,14 +1556,14 @@ typedef struct _MAC_TABLE_ENTRY { UCHAR PTK[64]; UCHAR ReTryCounter; RALINK_TIMER_STRUCT RetryTimer; - RALINK_TIMER_STRUCT EnqueueStartForPSKTimer; // A timer which enqueue EAPoL-Start for triggering PSK SM - NDIS_802_11_AUTHENTICATION_MODE AuthMode; // This should match to whatever microsoft defined + RALINK_TIMER_STRUCT EnqueueStartForPSKTimer; /* A timer which enqueue EAPoL-Start for triggering PSK SM */ + NDIS_802_11_AUTHENTICATION_MODE AuthMode; /* This should match to whatever microsoft defined */ NDIS_802_11_WEP_STATUS WepStatus; NDIS_802_11_WEP_STATUS GroupKeyWepStatus; AP_WPA_STATE WpaState; GTK_STATE GTKState; USHORT PortSecured; - NDIS_802_11_PRIVACY_FILTER PrivacyFilter; // PrivacyFilter enum for 802.1X + NDIS_802_11_PRIVACY_FILTER PrivacyFilter; /* PrivacyFilter enum for 802.1X */ CIPHER_KEY PairwiseKey; PVOID pAd; INT PMKID_CacheIdx; @@ -1572,75 +1572,75 @@ typedef struct _MAC_TABLE_ENTRY { UCHAR Addr[MAC_ADDR_LEN]; UCHAR PsMode; SST Sst; - AUTH_STATE AuthState; // for SHARED KEY authentication state machine used only - BOOLEAN IsReassocSta; // Indicate whether this is a reassociation procedure + AUTH_STATE AuthState; /* for SHARED KEY authentication state machine used only */ + BOOLEAN IsReassocSta; /* Indicate whether this is a reassociation procedure */ USHORT Aid; USHORT CapabilityInfo; UCHAR LastRssi; ULONG NoDataIdleCount; - UINT16 StationKeepAliveCount; // unit: second + UINT16 StationKeepAliveCount; /* unit: second */ ULONG PsQIdleCount; QUEUE_HEADER PsQueue; - UINT32 StaConnectTime; // the live time of this station since associated with AP + UINT32 StaConnectTime; /* the live time of this station since associated with AP */ BOOLEAN bSendBAR; USHORT NoBADataCountDown; - UINT32 CachedBuf[16]; // UINT (4 bytes) for alignment - UINT TxBFCount; // 3*3 + UINT32 CachedBuf[16]; /* UINT (4 bytes) for alignment */ + UINT TxBFCount; /* 3*3 */ UINT FIFOCount; UINT DebugFIFOCount; UINT DebugTxCount; BOOLEAN bDlsInit; -//==================================================== -//WDS entry needs these -// if ValidAsWDS==TRUE, MatchWDSTabIdx is the index in WdsTab.MacTab +/*==================================================== */ +/*WDS entry needs these */ +/* if ValidAsWDS==TRUE, MatchWDSTabIdx is the index in WdsTab.MacTab */ UINT MatchWDSTabIdx; UCHAR MaxSupportedRate; UCHAR CurrTxRate; UCHAR CurrTxRateIndex; - // to record the each TX rate's quality. 0 is best, the bigger the worse. + /* to record the each TX rate's quality. 0 is best, the bigger the worse. */ USHORT TxQuality[MAX_STEP_OF_TX_RATE_SWITCH]; -// USHORT OneSecTxOkCount; +/* USHORT OneSecTxOkCount; */ UINT32 OneSecTxNoRetryOkCount; UINT32 OneSecTxRetryOkCount; UINT32 OneSecTxFailCount; UINT32 ContinueTxFailCnt; - UINT32 CurrTxRateStableTime; // # of second in current TX rate - UCHAR TxRateUpPenalty; // extra # of second penalty due to last unstable condition -//==================================================== + UINT32 CurrTxRateStableTime; /* # of second in current TX rate */ + UCHAR TxRateUpPenalty; /* extra # of second penalty due to last unstable condition */ +/*==================================================== */ BOOLEAN fNoisyEnvironment; BOOLEAN fLastSecAccordingRSSI; - UCHAR LastSecTxRateChangeAction; // 0: no change, 1:rate UP, 2:rate down - CHAR LastTimeTxRateChangeAction; //Keep last time value of LastSecTxRateChangeAction + UCHAR LastSecTxRateChangeAction; /* 0: no change, 1:rate UP, 2:rate down */ + CHAR LastTimeTxRateChangeAction; /*Keep last time value of LastSecTxRateChangeAction */ ULONG LastTxOkCount; UCHAR PER[MAX_STEP_OF_TX_RATE_SWITCH]; - // a bitmap of BOOLEAN flags. each bit represent an operation status of a particular - // BOOLEAN control, either ON or OFF. These flags should always be accessed via - // CLIENT_STATUS_TEST_FLAG(), CLIENT_STATUS_SET_FLAG(), CLIENT_STATUS_CLEAR_FLAG() macros. - // see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition. fCLIENT_STATUS_AMSDU_INUSED + /* a bitmap of BOOLEAN flags. each bit represent an operation status of a particular */ + /* BOOLEAN control, either ON or OFF. These flags should always be accessed via */ + /* CLIENT_STATUS_TEST_FLAG(), CLIENT_STATUS_SET_FLAG(), CLIENT_STATUS_CLEAR_FLAG() macros. */ + /* see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition. fCLIENT_STATUS_AMSDU_INUSED */ ULONG ClientStatusFlags; - HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode; // For transmit phy setting in TXWI. + HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode; /* For transmit phy setting in TXWI. */ - // HT EWC MIMO-N used parameters - USHORT RXBAbitmap; // fill to on-chip RXWI_BA_BITMASK in 8.1.3RX attribute entry format - USHORT TXBAbitmap; // This bitmap as originator, only keep in software used to mark AMPDU bit in TXWI + /* HT EWC MIMO-N used parameters */ + USHORT RXBAbitmap; /* fill to on-chip RXWI_BA_BITMASK in 8.1.3RX attribute entry format */ + USHORT TXBAbitmap; /* This bitmap as originator, only keep in software used to mark AMPDU bit in TXWI */ USHORT TXAutoBAbitmap; USHORT BADeclineBitmap; - USHORT BARecWcidArray[NUM_OF_TID]; // The mapping wcid of recipient session. if RXBAbitmap bit is masked - USHORT BAOriWcidArray[NUM_OF_TID]; // The mapping wcid of originator session. if TXBAbitmap bit is masked - USHORT BAOriSequence[NUM_OF_TID]; // The mapping wcid of originator session. if TXBAbitmap bit is masked + USHORT BARecWcidArray[NUM_OF_TID]; /* The mapping wcid of recipient session. if RXBAbitmap bit is masked */ + USHORT BAOriWcidArray[NUM_OF_TID]; /* The mapping wcid of originator session. if TXBAbitmap bit is masked */ + USHORT BAOriSequence[NUM_OF_TID]; /* The mapping wcid of originator session. if TXBAbitmap bit is masked */ - // 802.11n features. + /* 802.11n features. */ UCHAR MpduDensity; UCHAR MaxRAmpduFactor; UCHAR AMsduSize; - UCHAR MmpsMode; // MIMO power save more. + UCHAR MmpsMode; /* MIMO power save more. */ HT_CAPABILITY_IE HTCapability; @@ -1670,16 +1670,16 @@ typedef struct _MAC_TABLE { QUEUE_HEADER McastPsQueue; ULONG PsQIdleCount; BOOLEAN fAnyStationInPsm; - BOOLEAN fAnyStationBadAtheros; // Check if any Station is atheros 802.11n Chip. We need to use RTS/CTS with Atheros 802,.11n chip. - BOOLEAN fAnyTxOPForceDisable; // Check if it is necessary to disable BE TxOP - BOOLEAN fAllStationAsRalink; // Check if all stations are ralink-chipset - BOOLEAN fAnyStationIsLegacy; // Check if I use legacy rate to transmit to my BSS Station/ - BOOLEAN fAnyStationNonGF; // Check if any Station can't support GF. - BOOLEAN fAnyStation20Only; // Check if any Station can't support GF. - BOOLEAN fAnyStationMIMOPSDynamic; // Check if any Station is MIMO Dynamic - BOOLEAN fAnyBASession; // Check if there is BA session. Force turn on RTS/CTS -//2008/10/28: KH add to support Antenna power-saving of AP<-- -//2008/10/28: KH add to support Antenna power-saving of AP--> + BOOLEAN fAnyStationBadAtheros; /* Check if any Station is atheros 802.11n Chip. We need to use RTS/CTS with Atheros 802,.11n chip. */ + BOOLEAN fAnyTxOPForceDisable; /* Check if it is necessary to disable BE TxOP */ + BOOLEAN fAllStationAsRalink; /* Check if all stations are ralink-chipset */ + BOOLEAN fAnyStationIsLegacy; /* Check if I use legacy rate to transmit to my BSS Station/ */ + BOOLEAN fAnyStationNonGF; /* Check if any Station can't support GF. */ + BOOLEAN fAnyStation20Only; /* Check if any Station can't support GF. */ + BOOLEAN fAnyStationMIMOPSDynamic; /* Check if any Station is MIMO Dynamic */ + BOOLEAN fAnyBASession; /* Check if there is BA session. Force turn on RTS/CTS */ +/*2008/10/28: KH add to support Antenna power-saving of AP<-- */ +/*2008/10/28: KH add to support Antenna power-saving of AP--> */ } MAC_TABLE, *PMAC_TABLE; struct wificonf { @@ -1711,11 +1711,11 @@ struct _RTMP_CHIP_OP_ { void (*AsicHaltAction) (RTMP_ADAPTER * pAd); }; -// -// The miniport adapter structure -// +/* */ +/* The miniport adapter structure */ +/* */ struct _RTMP_ADAPTER { - PVOID OS_Cookie; // save specific structure relative to OS + PVOID OS_Cookie; /* save specific structure relative to OS */ PNET_DEV net_dev; ULONG VirtualIfCnt; @@ -1726,7 +1726,7 @@ struct _RTMP_ADAPTER { /*****************************************************************************************/ /* PCI related parameters */ /*****************************************************************************************/ - PUCHAR CSRBaseAddress; // PCI MMIO Base Address, all access will use + PUCHAR CSRBaseAddress; /* PCI MMIO Base Address, all access will use */ unsigned int irq_num; USHORT LnkCtrlBitMask; @@ -1735,26 +1735,26 @@ struct _RTMP_ADAPTER { USHORT HostLnkCtrlConfiguration; USHORT HostLnkCtrlOffset; USHORT PCIePowerSaveLevel; - ULONG Rt3xxHostLinkCtrl; // USed for 3090F chip - ULONG Rt3xxRalinkLinkCtrl; // USed for 3090F chip - USHORT DeviceID; // Read from PCI config + ULONG Rt3xxHostLinkCtrl; /* USed for 3090F chip */ + ULONG Rt3xxRalinkLinkCtrl; /* USed for 3090F chip */ + USHORT DeviceID; /* Read from PCI config */ ULONG AccessBBPFailCount; - BOOLEAN bPCIclkOff; // flag that indicate if the PICE power status in Configuration SPace.. - BOOLEAN bPCIclkOffDisableTx; // + BOOLEAN bPCIclkOff; /* flag that indicate if the PICE power status in Configuration SPace.. */ + BOOLEAN bPCIclkOffDisableTx; /* */ - BOOLEAN brt30xxBanMcuCmd; //when = 0xff means all commands are ok to set . - BOOLEAN b3090ESpecialChip; //3090E special chip that write EEPROM 0x24=0x9280. - ULONG CheckDmaBusyCount; // Check Interrupt Status Register Count. + BOOLEAN brt30xxBanMcuCmd; /*when = 0xff means all commands are ok to set . */ + BOOLEAN b3090ESpecialChip; /*3090E special chip that write EEPROM 0x24=0x9280. */ + ULONG CheckDmaBusyCount; /* Check Interrupt Status Register Count. */ UINT int_enable_reg; UINT int_disable_mask; UINT int_pending; - RTMP_DMABUF TxBufSpace[NUM_OF_TX_RING]; // Shared memory of all 1st pre-allocated TxBuf associated with each TXD - RTMP_DMABUF RxDescRing; // Shared memory for RX descriptors - RTMP_DMABUF TxDescRing[NUM_OF_TX_RING]; // Shared memory for Tx descriptors - RTMP_TX_RING TxRing[NUM_OF_TX_RING]; // AC0~4 + HCCA -#endif // RTMP_MAC_PCI // + RTMP_DMABUF TxBufSpace[NUM_OF_TX_RING]; /* Shared memory of all 1st pre-allocated TxBuf associated with each TXD */ + RTMP_DMABUF RxDescRing; /* Shared memory for RX descriptors */ + RTMP_DMABUF TxDescRing[NUM_OF_TX_RING]; /* Shared memory for Tx descriptors */ + RTMP_TX_RING TxRing[NUM_OF_TX_RING]; /* AC0~4 + HCCA */ +#endif /* RTMP_MAC_PCI // */ NDIS_SPIN_LOCK irq_lock; UCHAR irq_disabled; @@ -1764,28 +1764,28 @@ struct _RTMP_ADAPTER { /* USB related parameters */ /*****************************************************************************************/ struct usb_config_descriptor *config; - UINT BulkInEpAddr; // bulk-in endpoint address - UINT BulkOutEpAddr[6]; // bulk-out endpoint address + UINT BulkInEpAddr; /* bulk-in endpoint address */ + UINT BulkOutEpAddr[6]; /* bulk-out endpoint address */ UINT NumberOfPipes; USHORT BulkOutMaxPacketSize; USHORT BulkInMaxPacketSize; - //======Control Flags + /*======Control Flags */ LONG PendingIoCount; ULONG BulkFlags; - BOOLEAN bUsbTxBulkAggre; // Flags for bulk out data priority + BOOLEAN bUsbTxBulkAggre; /* Flags for bulk out data priority */ - //======Cmd Thread + /*======Cmd Thread */ CmdQ CmdQ; - NDIS_SPIN_LOCK CmdQLock; // CmdQLock spinlock + NDIS_SPIN_LOCK CmdQLock; /* CmdQLock spinlock */ RTMP_OS_TASK cmdQTask; - //======Semaphores (event) + /*======Semaphores (event) */ RTMP_OS_SEM UsbVendorReq_semaphore; PVOID UsbVendorReqBuf; wait_queue_head_t *wait; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ /*****************************************************************************************/ /* RBUS related parameters */ @@ -1794,7 +1794,7 @@ struct _RTMP_ADAPTER { /*****************************************************************************************/ /* Both PCI/USB related parameters */ /*****************************************************************************************/ - //RTMP_DEV_INFO chipInfo; + /*RTMP_DEV_INFO chipInfo; */ RTMP_INF_TYPE infType; /*****************************************************************************************/ @@ -1802,42 +1802,42 @@ struct _RTMP_ADAPTER { /*****************************************************************************************/ RTMP_OS_TASK mlmeTask; #ifdef RTMP_TIMER_TASK_SUPPORT - // If you want use timer task to handle the timer related jobs, enable this. + /* If you want use timer task to handle the timer related jobs, enable this. */ RTMP_TIMER_TASK_QUEUE TimerQ; NDIS_SPIN_LOCK TimerQLock; RTMP_OS_TASK timerTask; -#endif // RTMP_TIMER_TASK_SUPPORT // +#endif /* RTMP_TIMER_TASK_SUPPORT // */ /*****************************************************************************************/ /* Tx related parameters */ /*****************************************************************************************/ - BOOLEAN DeQueueRunning[NUM_OF_TX_RING]; // for ensuring RTUSBDeQueuePacket get call once + BOOLEAN DeQueueRunning[NUM_OF_TX_RING]; /* for ensuring RTUSBDeQueuePacket get call once */ NDIS_SPIN_LOCK DeQueueLock[NUM_OF_TX_RING]; #ifdef RTMP_MAC_USB - // Data related context and AC specified, 4 AC supported - NDIS_SPIN_LOCK BulkOutLock[6]; // BulkOut spinlock for 4 ACs - NDIS_SPIN_LOCK MLMEBulkOutLock; // MLME BulkOut lock + /* Data related context and AC specified, 4 AC supported */ + NDIS_SPIN_LOCK BulkOutLock[6]; /* BulkOut spinlock for 4 ACs */ + NDIS_SPIN_LOCK MLMEBulkOutLock; /* MLME BulkOut lock */ HT_TX_CONTEXT TxContext[NUM_OF_TX_RING]; - NDIS_SPIN_LOCK TxContextQueueLock[NUM_OF_TX_RING]; // TxContextQueue spinlock + NDIS_SPIN_LOCK TxContextQueueLock[NUM_OF_TX_RING]; /* TxContextQueue spinlock */ - // 4 sets of Bulk Out index and pending flag - UCHAR NextBulkOutIndex[4]; // only used for 4 EDCA bulkout pipe + /* 4 sets of Bulk Out index and pending flag */ + UCHAR NextBulkOutIndex[4]; /* only used for 4 EDCA bulkout pipe */ - BOOLEAN BulkOutPending[6]; // used for total 6 bulkout pipe + BOOLEAN BulkOutPending[6]; /* used for total 6 bulkout pipe */ UCHAR bulkResetPipeid; BOOLEAN MgmtBulkPending; ULONG bulkResetReq[6]; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ - // resource for software backlog queues - QUEUE_HEADER TxSwQueue[NUM_OF_TX_RING]; // 4 AC + 1 HCCA - NDIS_SPIN_LOCK TxSwQueueLock[NUM_OF_TX_RING]; // TxSwQueue spinlock + /* resource for software backlog queues */ + QUEUE_HEADER TxSwQueue[NUM_OF_TX_RING]; /* 4 AC + 1 HCCA */ + NDIS_SPIN_LOCK TxSwQueueLock[NUM_OF_TX_RING]; /* TxSwQueue spinlock */ - RTMP_DMABUF MgmtDescRing; // Shared memory for MGMT descriptors + RTMP_DMABUF MgmtDescRing; /* Shared memory for MGMT descriptors */ RTMP_MGMT_RING MgmtRing; - NDIS_SPIN_LOCK MgmtRingLock; // Prio Ring spinlock + NDIS_SPIN_LOCK MgmtRingLock; /* Prio Ring spinlock */ /*****************************************************************************************/ /* Rx related parameters */ @@ -1845,65 +1845,65 @@ struct _RTMP_ADAPTER { #ifdef RTMP_MAC_PCI RTMP_RX_RING RxRing; - NDIS_SPIN_LOCK RxRingLock; // Rx Ring spinlock + NDIS_SPIN_LOCK RxRingLock; /* Rx Ring spinlock */ #ifdef RT3090 - NDIS_SPIN_LOCK McuCmdLock; //MCU Command Queue spinlock -#endif // RT3090 // -#endif // RTMP_MAC_PCI // + NDIS_SPIN_LOCK McuCmdLock; /*MCU Command Queue spinlock */ +#endif /* RT3090 // */ +#endif /* RTMP_MAC_PCI // */ #ifdef RTMP_MAC_USB - RX_CONTEXT RxContext[RX_RING_SIZE]; // 1 for redundant multiple IRP bulk in. - NDIS_SPIN_LOCK BulkInLock; // BulkIn spinlock for 4 ACs - UCHAR PendingRx; // The Maximum pending Rx value should be RX_RING_SIZE. - UCHAR NextRxBulkInIndex; // Indicate the current RxContext Index which hold by Host controller. - UCHAR NextRxBulkInReadIndex; // Indicate the current RxContext Index which driver can read & process it. - ULONG NextRxBulkInPosition; // Want to contatenate 2 URB buffer while 1st is bulkin failed URB. This Position is 1st URB TransferLength. - ULONG TransferBufferLength; // current length of the packet buffer - ULONG ReadPosition; // current read position in a packet buffer -#endif // RTMP_MAC_USB // + RX_CONTEXT RxContext[RX_RING_SIZE]; /* 1 for redundant multiple IRP bulk in. */ + NDIS_SPIN_LOCK BulkInLock; /* BulkIn spinlock for 4 ACs */ + UCHAR PendingRx; /* The Maximum pending Rx value should be RX_RING_SIZE. */ + UCHAR NextRxBulkInIndex; /* Indicate the current RxContext Index which hold by Host controller. */ + UCHAR NextRxBulkInReadIndex; /* Indicate the current RxContext Index which driver can read & process it. */ + ULONG NextRxBulkInPosition; /* Want to contatenate 2 URB buffer while 1st is bulkin failed URB. This Position is 1st URB TransferLength. */ + ULONG TransferBufferLength; /* current length of the packet buffer */ + ULONG ReadPosition; /* current read position in a packet buffer */ +#endif /* RTMP_MAC_USB // */ /*****************************************************************************************/ /* ASIC related parameters */ /*****************************************************************************************/ - UINT32 MACVersion; // MAC version. Record rt2860C(0x28600100) or rt2860D (0x28600101).. + UINT32 MACVersion; /* MAC version. Record rt2860C(0x28600100) or rt2860D (0x28600101).. */ - // --------------------------- - // E2PROM - // --------------------------- - ULONG EepromVersion; // byte 0: version, byte 1: revision, byte 2~3: unused - ULONG FirmwareVersion; // byte 0: Minor version, byte 1: Major version, otherwise unused. + /* --------------------------- */ + /* E2PROM */ + /* --------------------------- */ + ULONG EepromVersion; /* byte 0: version, byte 1: revision, byte 2~3: unused */ + ULONG FirmwareVersion; /* byte 0: Minor version, byte 1: Major version, otherwise unused. */ USHORT EEPROMDefaultValue[NUM_EEPROM_BBP_PARMS]; - UCHAR EEPROMAddressNum; // 93c46=6 93c66=8 + UCHAR EEPROMAddressNum; /* 93c46=6 93c66=8 */ BOOLEAN EepromAccess; UCHAR EFuseTag; - // --------------------------- - // BBP Control - // --------------------------- - UCHAR BbpWriteLatch[140]; // record last BBP register value written via BBP_IO_WRITE/BBP_IO_WRITE_VY_REG_ID - CHAR BbpRssiToDbmDelta; // change from UCHAR to CHAR for high power + /* --------------------------- */ + /* BBP Control */ + /* --------------------------- */ + UCHAR BbpWriteLatch[140]; /* record last BBP register value written via BBP_IO_WRITE/BBP_IO_WRITE_VY_REG_ID */ + CHAR BbpRssiToDbmDelta; /* change from UCHAR to CHAR for high power */ BBP_R66_TUNING BbpTuning; - // ---------------------------- - // RFIC control - // ---------------------------- - UCHAR RfIcType; // RFIC_xxx - ULONG RfFreqOffset; // Frequency offset for channel switching - RTMP_RF_REGS LatchRfRegs; // latch th latest RF programming value since RF IC doesn't support READ + /* ---------------------------- */ + /* RFIC control */ + /* ---------------------------- */ + UCHAR RfIcType; /* RFIC_xxx */ + ULONG RfFreqOffset; /* Frequency offset for channel switching */ + RTMP_RF_REGS LatchRfRegs; /* latch th latest RF programming value since RF IC doesn't support READ */ - EEPROM_ANTENNA_STRUC Antenna; // Since ANtenna definition is different for a & g. We need to save it for future reference. + EEPROM_ANTENNA_STRUC Antenna; /* Since ANtenna definition is different for a & g. We need to save it for future reference. */ EEPROM_NIC_CONFIG2_STRUC NicConfig2; - // This soft Rx Antenna Diversity mechanism is used only when user set - // RX Antenna = DIVERSITY ON + /* This soft Rx Antenna Diversity mechanism is used only when user set */ + /* RX Antenna = DIVERSITY ON */ SOFT_RX_ANT_DIVERSITY RxAnt; UCHAR RFProgSeq; - CHANNEL_TX_POWER TxPower[MAX_NUM_OF_CHANNELS]; // Store Tx power value for all channels. - CHANNEL_TX_POWER ChannelList[MAX_NUM_OF_CHANNELS]; // list all supported channels for site survey - CHANNEL_11J_TX_POWER TxPower11J[MAX_NUM_OF_11JCHANNELS]; // 802.11j channel and bw - CHANNEL_11J_TX_POWER ChannelList11J[MAX_NUM_OF_11JCHANNELS]; // list all supported channels for site survey + CHANNEL_TX_POWER TxPower[MAX_NUM_OF_CHANNELS]; /* Store Tx power value for all channels. */ + CHANNEL_TX_POWER ChannelList[MAX_NUM_OF_CHANNELS]; /* list all supported channels for site survey */ + CHANNEL_11J_TX_POWER TxPower11J[MAX_NUM_OF_11JCHANNELS]; /* 802.11j channel and bw */ + CHANNEL_11J_TX_POWER ChannelList11J[MAX_NUM_OF_11JCHANNELS]; /* list all supported channels for site survey */ - UCHAR ChannelListNum; // number of channel in ChannelList[] + UCHAR ChannelListNum; /* number of channel in ChannelList[] */ UCHAR Bbp94; BOOLEAN BbpForCCK; ULONG Tx20MPwrCfgABand[5]; @@ -1911,47 +1911,47 @@ struct _RTMP_ADAPTER { ULONG Tx40MPwrCfgABand[5]; ULONG Tx40MPwrCfgGBand[5]; - BOOLEAN bAutoTxAgcA; // Enable driver auto Tx Agc control - UCHAR TssiRefA; // Store Tssi reference value as 25 temperature. - UCHAR TssiPlusBoundaryA[5]; // Tssi boundary for increase Tx power to compensate. - UCHAR TssiMinusBoundaryA[5]; // Tssi boundary for decrease Tx power to compensate. - UCHAR TxAgcStepA; // Store Tx TSSI delta increment / decrement value - CHAR TxAgcCompensateA; // Store the compensation (TxAgcStep * (idx-1)) - - BOOLEAN bAutoTxAgcG; // Enable driver auto Tx Agc control - UCHAR TssiRefG; // Store Tssi reference value as 25 temperature. - UCHAR TssiPlusBoundaryG[5]; // Tssi boundary for increase Tx power to compensate. - UCHAR TssiMinusBoundaryG[5]; // Tssi boundary for decrease Tx power to compensate. - UCHAR TxAgcStepG; // Store Tx TSSI delta increment / decrement value - CHAR TxAgcCompensateG; // Store the compensation (TxAgcStep * (idx-1)) - - CHAR BGRssiOffset0; // Store B/G RSSI#0 Offset value on EEPROM 0x46h - CHAR BGRssiOffset1; // Store B/G RSSI#1 Offset value - CHAR BGRssiOffset2; // Store B/G RSSI#2 Offset value - - CHAR ARssiOffset0; // Store A RSSI#0 Offset value on EEPROM 0x4Ah - CHAR ARssiOffset1; // Store A RSSI#1 Offset value - CHAR ARssiOffset2; // Store A RSSI#2 Offset value - - CHAR BLNAGain; // Store B/G external LNA#0 value on EEPROM 0x44h - CHAR ALNAGain0; // Store A external LNA#0 value for ch36~64 - CHAR ALNAGain1; // Store A external LNA#1 value for ch100~128 - CHAR ALNAGain2; // Store A external LNA#2 value for ch132~165 + BOOLEAN bAutoTxAgcA; /* Enable driver auto Tx Agc control */ + UCHAR TssiRefA; /* Store Tssi reference value as 25 temperature. */ + UCHAR TssiPlusBoundaryA[5]; /* Tssi boundary for increase Tx power to compensate. */ + UCHAR TssiMinusBoundaryA[5]; /* Tssi boundary for decrease Tx power to compensate. */ + UCHAR TxAgcStepA; /* Store Tx TSSI delta increment / decrement value */ + CHAR TxAgcCompensateA; /* Store the compensation (TxAgcStep * (idx-1)) */ + + BOOLEAN bAutoTxAgcG; /* Enable driver auto Tx Agc control */ + UCHAR TssiRefG; /* Store Tssi reference value as 25 temperature. */ + UCHAR TssiPlusBoundaryG[5]; /* Tssi boundary for increase Tx power to compensate. */ + UCHAR TssiMinusBoundaryG[5]; /* Tssi boundary for decrease Tx power to compensate. */ + UCHAR TxAgcStepG; /* Store Tx TSSI delta increment / decrement value */ + CHAR TxAgcCompensateG; /* Store the compensation (TxAgcStep * (idx-1)) */ + + CHAR BGRssiOffset0; /* Store B/G RSSI#0 Offset value on EEPROM 0x46h */ + CHAR BGRssiOffset1; /* Store B/G RSSI#1 Offset value */ + CHAR BGRssiOffset2; /* Store B/G RSSI#2 Offset value */ + + CHAR ARssiOffset0; /* Store A RSSI#0 Offset value on EEPROM 0x4Ah */ + CHAR ARssiOffset1; /* Store A RSSI#1 Offset value */ + CHAR ARssiOffset2; /* Store A RSSI#2 Offset value */ + + CHAR BLNAGain; /* Store B/G external LNA#0 value on EEPROM 0x44h */ + CHAR ALNAGain0; /* Store A external LNA#0 value for ch36~64 */ + CHAR ALNAGain1; /* Store A external LNA#1 value for ch100~128 */ + CHAR ALNAGain2; /* Store A external LNA#2 value for ch132~165 */ #ifdef RT30xx - // for 3572 + /* for 3572 */ UCHAR Bbp25; UCHAR Bbp26; - UCHAR TxMixerGain24G; // Tx mixer gain value from EEPROM to improve Tx EVM / Tx DAC, 2.4G + UCHAR TxMixerGain24G; /* Tx mixer gain value from EEPROM to improve Tx EVM / Tx DAC, 2.4G */ UCHAR TxMixerGain5G; -#endif // RT30xx // - // ---------------------------- - // LED control - // ---------------------------- +#endif /* RT30xx // */ + /* ---------------------------- */ + /* LED control */ + /* ---------------------------- */ MCU_LEDCS_STRUC LedCntl; - USHORT Led1; // read from EEPROM 0x3c - USHORT Led2; // EEPROM 0x3e - USHORT Led3; // EEPROM 0x40 + USHORT Led1; /* read from EEPROM 0x3c */ + USHORT Led2; /* EEPROM 0x3e */ + USHORT Led3; /* EEPROM 0x40 */ UCHAR LedIndicatorStrength; UCHAR RssiSingalstrengthOffet; BOOLEAN bLedOnScanning; @@ -1960,12 +1960,12 @@ struct _RTMP_ADAPTER { /*****************************************************************************************/ /* 802.11 related parameters */ /*****************************************************************************************/ - // outgoing BEACON frame buffer and corresponding TXD + /* outgoing BEACON frame buffer and corresponding TXD */ TXWI_STRUC BeaconTxWI; PUCHAR BeaconBuf; USHORT BeaconOffset[HW_BEACON_MAX_COUNT]; - // pre-build PS-POLL and NULL frame upon link up. for efficiency purpose. + /* pre-build PS-POLL and NULL frame upon link up. for efficiency purpose. */ PSPOLL_FRAME PsPollFrame; HEADER_802_11 NullFrame; @@ -1974,45 +1974,45 @@ struct _RTMP_ADAPTER { TX_CONTEXT NullContext; TX_CONTEXT PsPollContext; TX_CONTEXT RTSContext; -#endif // RTMP_MAC_USB // - -//=========AP=========== - -//=======STA=========== - // ----------------------------------------------- - // STA specific configuration & operation status - // used only when pAd->OpMode == OPMODE_STA - // ----------------------------------------------- - STA_ADMIN_CONFIG StaCfg; // user desired settings - STA_ACTIVE_CONFIG StaActive; // valid only when ADHOC_ON(pAd) || INFRA_ON(pAd) - CHAR nickname[IW_ESSID_MAX_SIZE + 1]; // nickname, only used in the iwconfig i/f +#endif /* RTMP_MAC_USB // */ + +/*=========AP=========== */ + +/*=======STA=========== */ + /* ----------------------------------------------- */ + /* STA specific configuration & operation status */ + /* used only when pAd->OpMode == OPMODE_STA */ + /* ----------------------------------------------- */ + STA_ADMIN_CONFIG StaCfg; /* user desired settings */ + STA_ACTIVE_CONFIG StaActive; /* valid only when ADHOC_ON(pAd) || INFRA_ON(pAd) */ + CHAR nickname[IW_ESSID_MAX_SIZE + 1]; /* nickname, only used in the iwconfig i/f */ NDIS_MEDIA_STATE PreMediaState; -//=======Common=========== - // OP mode: either AP or STA - UCHAR OpMode; // OPMODE_STA, OPMODE_AP +/*=======Common=========== */ + /* OP mode: either AP or STA */ + UCHAR OpMode; /* OPMODE_STA, OPMODE_AP */ - NDIS_MEDIA_STATE IndicateMediaState; // Base on Indication state, default is NdisMediaStateDisConnected + NDIS_MEDIA_STATE IndicateMediaState; /* Base on Indication state, default is NdisMediaStateDisConnected */ /* MAT related parameters */ - // configuration: read from Registry & E2PROM - BOOLEAN bLocalAdminMAC; // Use user changed MAC - UCHAR PermanentAddress[MAC_ADDR_LEN]; // Factory default MAC address - UCHAR CurrentAddress[MAC_ADDR_LEN]; // User changed MAC address + /* configuration: read from Registry & E2PROM */ + BOOLEAN bLocalAdminMAC; /* Use user changed MAC */ + UCHAR PermanentAddress[MAC_ADDR_LEN]; /* Factory default MAC address */ + UCHAR CurrentAddress[MAC_ADDR_LEN]; /* User changed MAC address */ - // ------------------------------------------------------ - // common configuration to both OPMODE_STA and OPMODE_AP - // ------------------------------------------------------ + /* ------------------------------------------------------ */ + /* common configuration to both OPMODE_STA and OPMODE_AP */ + /* ------------------------------------------------------ */ COMMON_CONFIG CommonCfg; MLME_STRUCT Mlme; - // AP needs those vaiables for site survey feature. - MLME_AUX MlmeAux; // temporary settings used during MLME state machine - BSS_TABLE ScanTab; // store the latest SCAN result + /* AP needs those vaiables for site survey feature. */ + MLME_AUX MlmeAux; /* temporary settings used during MLME state machine */ + BSS_TABLE ScanTab; /* store the latest SCAN result */ - //About MacTab, the sta driver will use #0 and #1 for multicast and AP. - MAC_TABLE MacTab; // ASIC on-chip WCID entry table. At TX, ASIC always use key according to this on-chip table. + /*About MacTab, the sta driver will use #0 and #1 for multicast and AP. */ + MAC_TABLE MacTab; /* ASIC on-chip WCID entry table. At TX, ASIC always use key according to this on-chip table. */ NDIS_SPIN_LOCK MacTabLock; BA_TABLE BATable; @@ -2020,46 +2020,46 @@ struct _RTMP_ADAPTER { NDIS_SPIN_LOCK BATabLock; RALINK_TIMER_STRUCT RECBATimer; - // encryption/decryption KEY tables - CIPHER_KEY SharedKey[MAX_MBSSID_NUM][4]; // STA always use SharedKey[BSS0][0..3] + /* encryption/decryption KEY tables */ + CIPHER_KEY SharedKey[MAX_MBSSID_NUM][4]; /* STA always use SharedKey[BSS0][0..3] */ - // RX re-assembly buffer for fragmentation - FRAGMENT_FRAME FragFrame; // Frame storage for fragment frame + /* RX re-assembly buffer for fragmentation */ + FRAGMENT_FRAME FragFrame; /* Frame storage for fragment frame */ - // various Counters - COUNTER_802_3 Counters8023; // 802.3 counters - COUNTER_802_11 WlanCounters; // 802.11 MIB counters - COUNTER_RALINK RalinkCounters; // Ralink propriety counters - COUNTER_DRS DrsCounters; // counters for Dynamic TX Rate Switching - PRIVATE_STRUC PrivateInfo; // Private information & counters + /* various Counters */ + COUNTER_802_3 Counters8023; /* 802.3 counters */ + COUNTER_802_11 WlanCounters; /* 802.11 MIB counters */ + COUNTER_RALINK RalinkCounters; /* Ralink propriety counters */ + COUNTER_DRS DrsCounters; /* counters for Dynamic TX Rate Switching */ + PRIVATE_STRUC PrivateInfo; /* Private information & counters */ - // flags, see fRTMP_ADAPTER_xxx flags - ULONG Flags; // Represent current device status - ULONG PSFlags; // Power Save operation flag. + /* flags, see fRTMP_ADAPTER_xxx flags */ + ULONG Flags; /* Represent current device status */ + ULONG PSFlags; /* Power Save operation flag. */ - // current TX sequence # + /* current TX sequence # */ USHORT Sequence; - // Control disconnect / connect event generation - //+++Didn't used anymore + /* Control disconnect / connect event generation */ + /*+++Didn't used anymore */ ULONG LinkDownTime; - //--- + /*--- */ ULONG LastRxRate; ULONG LastTxRate; - //+++Used only for Station - BOOLEAN bConfigChanged; // Config Change flag for the same SSID setting - //--- + /*+++Used only for Station */ + BOOLEAN bConfigChanged; /* Config Change flag for the same SSID setting */ + /*--- */ - ULONG ExtraInfo; // Extra information for displaying status - ULONG SystemErrorBitmap; // b0: E2PROM version error + ULONG ExtraInfo; /* Extra information for displaying status */ + ULONG SystemErrorBitmap; /* b0: E2PROM version error */ - //+++Didn't used anymore - ULONG MacIcVersion; // MAC/BBP serial interface issue solved after ver.D - //--- + /*+++Didn't used anymore */ + ULONG MacIcVersion; /* MAC/BBP serial interface issue solved after ver.D */ + /*--- */ - // --------------------------- - // System event log - // --------------------------- + /* --------------------------- */ + /* System event log */ + /* --------------------------- */ RT_802_11_EVENT_TABLE EventTab; BOOLEAN HTCEnable; @@ -2070,64 +2070,64 @@ struct _RTMP_ADAPTER { #ifdef RTMP_MAC_USB ULONG BulkOutDataOneSecCount; ULONG BulkInDataOneSecCount; - ULONG BulkLastOneSecCount; // BulkOutDataOneSecCount + BulkInDataOneSecCount + ULONG BulkLastOneSecCount; /* BulkOutDataOneSecCount + BulkInDataOneSecCount */ ULONG watchDogRxCnt; ULONG watchDogRxOverFlowCnt; ULONG watchDogTxPendingCnt[NUM_OF_TX_RING]; INT TransferedLength[NUM_OF_TX_RING]; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ BOOLEAN bUpdateBcnCntDone; - ULONG watchDogMacDeadlock; // prevent MAC/BBP into deadlock condition - // ---------------------------- - // DEBUG paramerts - // ---------------------------- - //ULONG DebugSetting[4]; + ULONG watchDogMacDeadlock; /* prevent MAC/BBP into deadlock condition */ + /* ---------------------------- */ + /* DEBUG paramerts */ + /* ---------------------------- */ + /*ULONG DebugSetting[4]; */ BOOLEAN bBanAllBaSetup; BOOLEAN bPromiscuous; - // ---------------------------- - // rt2860c emulation-use Parameters - // ---------------------------- - //ULONG rtsaccu[30]; - //ULONG ctsaccu[30]; - //ULONG cfendaccu[30]; - //ULONG bacontent[16]; - //ULONG rxint[RX_RING_SIZE+1]; - //UCHAR rcvba[60]; + /* ---------------------------- */ + /* rt2860c emulation-use Parameters */ + /* ---------------------------- */ + /*ULONG rtsaccu[30]; */ + /*ULONG ctsaccu[30]; */ + /*ULONG cfendaccu[30]; */ + /*ULONG bacontent[16]; */ + /*ULONG rxint[RX_RING_SIZE+1]; */ + /*UCHAR rcvba[60]; */ BOOLEAN bLinkAdapt; BOOLEAN bForcePrintTX; BOOLEAN bForcePrintRX; - //BOOLEAN bDisablescanning; //defined in RT2870 USB + /*BOOLEAN bDisablescanning; //defined in RT2870 USB */ BOOLEAN bStaFifoTest; BOOLEAN bProtectionTest; BOOLEAN bBroadComHT; - //+++Following add from RT2870 USB. + /*+++Following add from RT2870 USB. */ ULONG BulkOutReq; ULONG BulkOutComplete; ULONG BulkOutCompleteOther; - ULONG BulkOutCompleteCancel; // seems not use now? + ULONG BulkOutCompleteCancel; /* seems not use now? */ ULONG BulkInReq; ULONG BulkInComplete; ULONG BulkInCompleteFail; - //--- + /*--- */ struct wificonf WIFItestbed; struct reordering_mpdu_pool mpdu_blk_pool; - ULONG OneSecondnonBEpackets; // record non BE packets per second + ULONG OneSecondnonBEpackets; /* record non BE packets per second */ #ifdef LINUX struct iw_statistics iw_stats; struct net_device_stats stats; -#endif // LINUX // +#endif /* LINUX // */ ULONG TbttTickCount; #ifdef PCI_MSI_SUPPORT BOOLEAN HaveMsi; -#endif // PCI_MSI_SUPPORT // +#endif /* PCI_MSI_SUPPORT // */ UCHAR is_on; @@ -2143,30 +2143,30 @@ struct _RTMP_ADAPTER { #ifdef RTMP_EFUSE_SUPPORT BOOLEAN bUseEfuse; UCHAR EEPROMImage[1024]; -#endif // RTMP_EFUSE_SUPPORT // -#endif // RT30xx // +#endif /* RTMP_EFUSE_SUPPORT // */ +#endif /* RT30xx // */ }; #define DELAYINTMASK 0x0003fffb #define INTMASK 0x0003fffb #define IndMask 0x0003fffc -#define RxINT 0x00000005 // Delayed Rx or indivi rx -#define TxDataInt 0x000000fa // Delayed Tx or indivi tx -#define TxMgmtInt 0x00000102 // Delayed Tx or indivi tx -#define TxCoherent 0x00020000 // tx coherent -#define RxCoherent 0x00010000 // rx coherent -#define McuCommand 0x00000200 // mcu -#define PreTBTTInt 0x00001000 // Pre-TBTT interrupt -#define TBTTInt 0x00000800 // TBTT interrupt -#define GPTimeOutInt 0x00008000 // GPtimeout interrupt -#define AutoWakeupInt 0x00004000 // AutoWakeupInt interrupt -#define FifoStaFullInt 0x00002000 // fifo statistics full interrupt +#define RxINT 0x00000005 /* Delayed Rx or indivi rx */ +#define TxDataInt 0x000000fa /* Delayed Tx or indivi tx */ +#define TxMgmtInt 0x00000102 /* Delayed Tx or indivi tx */ +#define TxCoherent 0x00020000 /* tx coherent */ +#define RxCoherent 0x00010000 /* rx coherent */ +#define McuCommand 0x00000200 /* mcu */ +#define PreTBTTInt 0x00001000 /* Pre-TBTT interrupt */ +#define TBTTInt 0x00000800 /* TBTT interrupt */ +#define GPTimeOutInt 0x00008000 /* GPtimeout interrupt */ +#define AutoWakeupInt 0x00004000 /* AutoWakeupInt interrupt */ +#define FifoStaFullInt 0x00002000 /* fifo statistics full interrupt */ /*************************************************************************** * Rx Path software control block related data structures **************************************************************************/ typedef struct _RX_BLK_ { -// RXD_STRUC RxD; // sample +/* RXD_STRUC RxD; // sample */ RT28XX_RXD_STRUC RxD; PRXWI_STRUC pRxWI; PHEADER_802_11 pHeader; @@ -2174,7 +2174,7 @@ typedef struct _RX_BLK_ { UCHAR *pData; USHORT DataSize; USHORT Flags; - UCHAR UserPriority; // for calculate TKIP MIC using + UCHAR UserPriority; /* for calculate TKIP MIC using */ } RX_BLK; #define RX_BLK_SET_FLAG(_pRxBlk, _flag) (_pRxBlk->Flags |= _flag) @@ -2210,53 +2210,53 @@ typedef struct _RX_BLK_ { #define TX_RALINK_FRAME 0x10 #define TX_FRAG_FRAME 0x20 -// Currently the sizeof(TX_BLK) is 148 bytes. +/* Currently the sizeof(TX_BLK) is 148 bytes. */ typedef struct _TX_BLK_ { UCHAR QueIdx; - UCHAR TxFrameType; // Indicate the Transmission type of the all frames in one batch - UCHAR TotalFrameNum; // Total frame number want to send-out in one batch - USHORT TotalFragNum; // Total frame fragments required in one batch - USHORT TotalFrameLen; // Total length of all frames want to send-out in one batch + UCHAR TxFrameType; /* Indicate the Transmission type of the all frames in one batch */ + UCHAR TotalFrameNum; /* Total frame number want to send-out in one batch */ + USHORT TotalFragNum; /* Total frame fragments required in one batch */ + USHORT TotalFrameLen; /* Total length of all frames want to send-out in one batch */ QUEUE_HEADER TxPacketList; - MAC_TABLE_ENTRY *pMacEntry; // NULL: packet with 802.11 RA field is multicast/broadcast address + MAC_TABLE_ENTRY *pMacEntry; /* NULL: packet with 802.11 RA field is multicast/broadcast address */ HTTRANSMIT_SETTING *pTransmit; - // Following structure used for the characteristics of a specific packet. + /* Following structure used for the characteristics of a specific packet. */ PNDIS_PACKET pPacket; - PUCHAR pSrcBufHeader; // Reference to the head of sk_buff->data - PUCHAR pSrcBufData; // Reference to the sk_buff->data, will changed depends on hanlding progresss - UINT SrcBufLen; // Length of packet payload which not including Layer 2 header - PUCHAR pExtraLlcSnapEncap; // NULL means no extra LLC/SNAP is required - UCHAR HeaderBuf[128]; // TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP - //RT2870 2.1.0.0 uses only 80 bytes - //RT3070 2.1.1.0 uses only 96 bytes - //RT3090 2.1.0.0 uses only 96 bytes - UCHAR MpduHeaderLen; // 802.11 header length NOT including the padding - UCHAR HdrPadLen; // recording Header Padding Length; - UCHAR apidx; // The interface associated to this packet - UCHAR Wcid; // The MAC entry associated to this packet - UCHAR UserPriority; // priority class of packet - UCHAR FrameGap; // what kind of IFS this packet use - UCHAR MpduReqNum; // number of fragments of this frame - UCHAR TxRate; // TODO: Obsoleted? Should change to MCS? - UCHAR CipherAlg; // cipher alogrithm + PUCHAR pSrcBufHeader; /* Reference to the head of sk_buff->data */ + PUCHAR pSrcBufData; /* Reference to the sk_buff->data, will changed depends on hanlding progresss */ + UINT SrcBufLen; /* Length of packet payload which not including Layer 2 header */ + PUCHAR pExtraLlcSnapEncap; /* NULL means no extra LLC/SNAP is required */ + UCHAR HeaderBuf[128]; /* TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP */ + /*RT2870 2.1.0.0 uses only 80 bytes */ + /*RT3070 2.1.1.0 uses only 96 bytes */ + /*RT3090 2.1.0.0 uses only 96 bytes */ + UCHAR MpduHeaderLen; /* 802.11 header length NOT including the padding */ + UCHAR HdrPadLen; /* recording Header Padding Length; */ + UCHAR apidx; /* The interface associated to this packet */ + UCHAR Wcid; /* The MAC entry associated to this packet */ + UCHAR UserPriority; /* priority class of packet */ + UCHAR FrameGap; /* what kind of IFS this packet use */ + UCHAR MpduReqNum; /* number of fragments of this frame */ + UCHAR TxRate; /* TODO: Obsoleted? Should change to MCS? */ + UCHAR CipherAlg; /* cipher alogrithm */ PCIPHER_KEY pKey; - USHORT Flags; //See following definitions for detail. + USHORT Flags; /*See following definitions for detail. */ - //YOU SHOULD NOT TOUCH IT! Following parameters are used for hardware-depended layer. - ULONG Priv; // Hardware specific value saved in here. + /*YOU SHOULD NOT TOUCH IT! Following parameters are used for hardware-depended layer. */ + ULONG Priv; /* Hardware specific value saved in here. */ } TX_BLK, *PTX_BLK; -#define fTX_bRtsRequired 0x0001 // Indicate if need send RTS frame for protection. Not used in RT2860/RT2870. -#define fTX_bAckRequired 0x0002 // the packet need ack response -#define fTX_bPiggyBack 0x0004 // Legacy device use Piggback or not -#define fTX_bHTRate 0x0008 // allow to use HT rate -#define fTX_bForceNonQoS 0x0010 // force to transmit frame without WMM-QoS in HT mode -#define fTX_bAllowFrag 0x0020 // allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment -#define fTX_bMoreData 0x0040 // there are more data packets in PowerSave Queue -#define fTX_bWMM 0x0080 // QOS Data +#define fTX_bRtsRequired 0x0001 /* Indicate if need send RTS frame for protection. Not used in RT2860/RT2870. */ +#define fTX_bAckRequired 0x0002 /* the packet need ack response */ +#define fTX_bPiggyBack 0x0004 /* Legacy device use Piggback or not */ +#define fTX_bHTRate 0x0008 /* allow to use HT rate */ +#define fTX_bForceNonQoS 0x0010 /* force to transmit frame without WMM-QoS in HT mode */ +#define fTX_bAllowFrag 0x0020 /* allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment */ +#define fTX_bMoreData 0x0040 /* there are more data packets in PowerSave Queue */ +#define fTX_bWMM 0x0080 /* QOS Data */ #define fTX_bClearEAPFrame 0x0100 #define TX_BLK_SET_FLAG(_pTxBlk, _flag) (_pTxBlk->Flags |= _flag) @@ -2278,7 +2278,7 @@ static inline VOID ConvertMulticastIP2MAC(IN PUCHAR pIpAddr, switch (ProtoType) { case ETH_P_IPV6: -// memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS); +/* memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS); */ *(*ppMacAddr) = 0x33; *(*ppMacAddr + 1) = 0x33; *(*ppMacAddr + 2) = pIpAddr[12]; @@ -2289,7 +2289,7 @@ static inline VOID ConvertMulticastIP2MAC(IN PUCHAR pIpAddr, case ETH_P_IP: default: -// memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS); +/* memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS); */ *(*ppMacAddr) = 0x01; *(*ppMacAddr + 1) = 0x00; *(*ppMacAddr + 2) = 0x5e; @@ -2305,9 +2305,9 @@ static inline VOID ConvertMulticastIP2MAC(IN PUCHAR pIpAddr, char *GetPhyMode(int Mode); char *GetBW(int BW); -// -// Private routines in rtmp_init.c -// +/* */ +/* Private routines in rtmp_init.c */ +/* */ NDIS_STATUS RTMPAllocAdapterBlock(IN PVOID handle, OUT PRTMP_ADAPTER * ppAdapter); @@ -2328,7 +2328,7 @@ NDIS_STATUS RT30xxWriteRFRegister(IN PRTMP_ADAPTER pAd, NDIS_STATUS RT30xxReadRFRegister(IN PRTMP_ADAPTER pAd, IN UCHAR regID, IN PUCHAR pValue); -#endif // RTMP_RF_RW_SUPPORT // +#endif /* RTMP_RF_RW_SUPPORT // */ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr); @@ -2386,9 +2386,9 @@ VOID RTMPSetSignalLED(IN PRTMP_ADAPTER pAd, IN NDIS_802_11_RSSI Dbm); VOID RTMPEnableRxTx(IN PRTMP_ADAPTER pAd); -// -// prototype in action.c -// +/* */ +/* prototype in action.c */ +/* */ VOID ActionStateMachineInit(IN PRTMP_ADAPTER pAd, IN STATE_MACHINE * S, OUT STATE_MACHINE_FUNC Trans[]); @@ -2444,9 +2444,9 @@ BOOLEAN CntlEnqueueForRecv(IN PRTMP_ADAPTER pAd, IN ULONG Wcid, IN ULONG MsgLen, IN PFRAME_BA_REQ pMsg); -// -// Private routines in rtmp_data.c -// +/* */ +/* Private routines in rtmp_data.c */ +/* */ BOOLEAN RTMPHandleRxDoneInterrupt(IN PRTMP_ADAPTER pAd); BOOLEAN RTMPHandleTxRingDmaDoneInterrupt(IN PRTMP_ADAPTER pAd, @@ -2511,11 +2511,11 @@ NDIS_STATUS MlmeDataHardTransmit(IN PRTMP_ADAPTER pAd, VOID RTMPWriteTxDescriptor(IN PRTMP_ADAPTER pAd, IN PTXD_STRUC pTxD, IN BOOLEAN bWIV, IN UCHAR QSEL); -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ USHORT RTMPCalcDuration(IN PRTMP_ADAPTER pAd, IN UCHAR Rate, IN ULONG Size); -VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pTxWI, IN BOOLEAN FRAG, IN BOOLEAN CFACK, IN BOOLEAN InsTimestamp, IN BOOLEAN AMPDU, IN BOOLEAN Ack, IN BOOLEAN NSeq, // HW new a sequence. +VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pTxWI, IN BOOLEAN FRAG, IN BOOLEAN CFACK, IN BOOLEAN InsTimestamp, IN BOOLEAN AMPDU, IN BOOLEAN Ack, IN BOOLEAN NSeq, /* HW new a sequence. */ IN UCHAR BASize, IN UCHAR WCID, IN ULONG Length, @@ -2538,8 +2538,8 @@ VOID RTMPResumeMsduTransmission(IN PRTMP_ADAPTER pAd); NDIS_STATUS MiniportMMRequest(IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx, IN PUCHAR pData, IN UINT Length); -//+++mark by shiang, now this function merge to MiniportMMRequest() -//---mark by shiang, now this function merge to MiniportMMRequest() +/*+++mark by shiang, now this function merge to MiniportMMRequest() */ +/*---mark by shiang, now this function merge to MiniportMMRequest() */ VOID RTMPSendNullFrame(IN PRTMP_ADAPTER pAd, IN UCHAR TxRate, IN BOOLEAN bQosNull); @@ -2588,9 +2588,9 @@ BOOLEAN RTMPCheckDHCPFrame(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket); BOOLEAN RTMPCheckEtherType(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket); -// -// Private routines in rtmp_wep.c -// +/* */ +/* Private routines in rtmp_wep.c */ +/* */ VOID RTMPInitWepEngine(IN PRTMP_ADAPTER pAd, IN PUCHAR pKey, IN UCHAR KeyId, IN UCHAR KeyLen, IN PUCHAR pDest); @@ -2619,11 +2619,11 @@ VOID WPAARCFOUR_ENCRYPT(IN PARCFOURCONTEXT Ctx, UINT RTMP_CALC_FCS32(IN UINT Fcs, IN PUCHAR Cp, IN INT Len); -// -// MLME routines -// +/* */ +/* MLME routines */ +/* */ -// Asic/RF/BBP related functions +/* Asic/RF/BBP related functions */ VOID AsicAdjustTxPower(IN PRTMP_ADAPTER pAd); @@ -2711,7 +2711,7 @@ BOOLEAN AsicSendCommandToMcu(IN PRTMP_ADAPTER pAd, #ifdef RTMP_MAC_PCI BOOLEAN AsicCheckCommanOk(IN PRTMP_ADAPTER pAd, IN UCHAR Command); -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ VOID MacAddrRandomBssid(IN PRTMP_ADAPTER pAd, OUT PUCHAR pAddr); @@ -2748,7 +2748,7 @@ VOID BssTableDeleteEntry(IN OUT PBSS_TABLE pTab, VOID BATableDeleteORIEntry(IN OUT PRTMP_ADAPTER pAd, IN BA_ORI_ENTRY * pBAORIEntry); -VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT PBSS_ENTRY pBss, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN PCF_PARM CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, // AP might use this additional ht info IE +VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT PBSS_ENTRY pBss, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN PCF_PARM CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, /* AP might use this additional ht info IE */ IN UCHAR HtCapabilityLen, IN UCHAR AddHtInfoLen, IN UCHAR NewExtChanOffset, @@ -2761,7 +2761,7 @@ VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT PBSS_ENTRY pBss, IN PUCHAR pBssid, IN IN PQBSS_LOAD_PARM pQbssLoad, IN USHORT LengthVIE, IN PNDIS_802_11_VARIABLE_IEs pVIE); -ULONG BssTableSetEntry(IN PRTMP_ADAPTER pAd, OUT PBSS_TABLE pTab, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN CF_PARM * CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, // AP might use this additional ht info IE +ULONG BssTableSetEntry(IN PRTMP_ADAPTER pAd, OUT PBSS_TABLE pTab, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN CF_PARM * CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, /* AP might use this additional ht info IE */ IN UCHAR HtCapabilityLen, IN UCHAR AddHtInfoLen, IN UCHAR NewExtChanOffset, @@ -2849,7 +2849,7 @@ VOID DisassocTimeout(IN PVOID SystemSpecific1, IN PVOID FunctionContext, IN PVOID SystemSpecific2, IN PVOID SystemSpecific3); -//---------------------------------------------- +/*---------------------------------------------- */ VOID MlmeAssocReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem); VOID MlmeReassocReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem); @@ -2879,7 +2879,7 @@ VOID InvalidStateWhenDisassociate(IN PRTMP_ADAPTER pAd, #ifdef RTMP_MAC_USB VOID MlmeCntlConfirm(IN PRTMP_ADAPTER pAd, IN ULONG MsgType, IN USHORT Msg); -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ VOID ComposePsPoll(IN PRTMP_ADAPTER pAd); @@ -2918,7 +2918,7 @@ VOID MlmeDeauthReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem); VOID InvalidStateWhenAuth(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem); -//============================================= +/*============================================= */ VOID AuthRspStateMachineInit(IN PRTMP_ADAPTER pAd, IN PSTATE_MACHINE Sm, @@ -2932,11 +2932,11 @@ VOID PeerAuthSimpleRspGenAndSend(IN PRTMP_ADAPTER pAd, IN USHORT Seq, IN USHORT Reason, IN USHORT Status); -// -// Private routines in dls.c -// +/* */ +/* Private routines in dls.c */ +/* */ -//======================================== +/*======================================== */ VOID SyncStateMachineInit(IN PRTMP_ADAPTER pAd, IN STATE_MACHINE * Sm, @@ -2959,7 +2959,7 @@ VOID InvalidStateWhenStart(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem); VOID EnqueueProbeRequest(IN PRTMP_ADAPTER pAd); BOOLEAN ScanRunning(IN PRTMP_ADAPTER pAd); -//========================================= +/*========================================= */ VOID MlmeCntlInit(IN PRTMP_ADAPTER pAd, IN STATE_MACHINE * S, OUT STATE_MACHINE_FUNC Trans[]); @@ -3135,7 +3135,7 @@ BOOLEAN PeerAuthSanity(IN PRTMP_ADAPTER pAd, OUT USHORT * Seq, OUT USHORT * Status, OUT CHAR ChlgText[]); -BOOLEAN PeerAssocRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * pMsg, IN ULONG MsgLen, OUT PUCHAR pAddr2, OUT USHORT * pCapabilityInfo, OUT USHORT * pStatus, OUT USHORT * pAid, OUT UCHAR SupRate[], OUT UCHAR * pSupRateLen, OUT UCHAR ExtRate[], OUT UCHAR * pExtRateLen, OUT HT_CAPABILITY_IE * pHtCapability, OUT ADD_HT_INFO_IE * pAddHtInfo, // AP might use this additional ht info IE +BOOLEAN PeerAssocRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * pMsg, IN ULONG MsgLen, OUT PUCHAR pAddr2, OUT USHORT * pCapabilityInfo, OUT USHORT * pStatus, OUT USHORT * pAid, OUT UCHAR SupRate[], OUT UCHAR * pSupRateLen, OUT UCHAR ExtRate[], OUT UCHAR * pExtRateLen, OUT HT_CAPABILITY_IE * pHtCapability, OUT ADD_HT_INFO_IE * pAddHtInfo, /* AP might use this additional ht info IE */ OUT UCHAR * pHtCapabilityLen, OUT UCHAR * pAddHtInfoLen, OUT UCHAR * pNewExtChannelOffset, @@ -3260,7 +3260,7 @@ VOID AsicSetRxAnt(IN PRTMP_ADAPTER pAd, IN UCHAR Ant); VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd); #ifdef RTMP_EFUSE_SUPPORT -//2008/09/11:KH add to support efuse<-- +/*2008/09/11:KH add to support efuse<-- */ INT set_eFuseGetFreeBlockCount_Proc(IN PRTMP_ADAPTER pAd, IN PSTRING arg); INT set_eFusedump_Proc(IN PRTMP_ADAPTER pAd, IN PSTRING arg); @@ -3274,28 +3274,28 @@ int RtmpEfuseSupportCheck(IN RTMP_ADAPTER * pAd); VOID eFuseGetFreeBlockCount(IN PRTMP_ADAPTER pAd, PUINT EfuseFreeBlock); INT eFuse_init(IN PRTMP_ADAPTER pAd); -//2008/09/11:KH add to support efuse--> -#endif // RTMP_EFUSE_SUPPORT // +/*2008/09/11:KH add to support efuse--> */ +#endif /* RTMP_EFUSE_SUPPORT // */ -// add by johnli, RF power sequence setup +/* add by johnli, RF power sequence setup */ VOID RT30xxLoadRFNormalModeSetup(IN PRTMP_ADAPTER pAd); VOID RT30xxLoadRFSleepModeSetup(IN PRTMP_ADAPTER pAd); VOID RT30xxReverseRFSleepModeSetup(IN PRTMP_ADAPTER pAd); -// end johnli +/* end johnli */ #ifdef RT3070 VOID NICInitRT3070RFRegisters(IN RTMP_ADAPTER * pAd); -#endif // RT3070 // +#endif /* RT3070 // */ #ifdef RT3090 VOID NICInitRT3090RFRegisters(IN RTMP_ADAPTER * pAd); -#endif // RT3090 // +#endif /* RT3090 // */ VOID RT30xxHaltAction(IN PRTMP_ADAPTER pAd); VOID RT30xxSetRxAnt(IN PRTMP_ADAPTER pAd, IN UCHAR Ant); -#endif // RT30xx // +#endif /* RT30xx // */ VOID AsicEvaluateRxAnt(IN PRTMP_ADAPTER pAd); @@ -3333,9 +3333,9 @@ UCHAR NextChannel(IN PRTMP_ADAPTER pAd, IN UCHAR channel); VOID ChangeToCellPowerLimit(IN PRTMP_ADAPTER pAd, IN UCHAR AironetCellPowerLimit); -// -// Prototypes of function definition in rtmp_tkip.c -// +/* */ +/* Prototypes of function definition in rtmp_tkip.c */ +/* */ VOID RTMPInitTkipEngine(IN PRTMP_ADAPTER pAd, IN PUCHAR pTKey, IN UCHAR KeyId, @@ -3375,9 +3375,9 @@ BOOLEAN RTMPSoftDecryptAES(IN PRTMP_ADAPTER pAd, IN PUCHAR pData, IN ULONG DataByteCnt, IN PCIPHER_KEY pWpaKey); -// -// Prototypes of function definition in cmm_info.c -// +/* */ +/* Prototypes of function definition in cmm_info.c */ +/* */ INT RT_CfgSetCountryRegion(IN PRTMP_ADAPTER pAd, IN PSTRING arg, IN INT band); INT RT_CfgSetWirelessMode(IN PRTMP_ADAPTER pAd, IN PSTRING arg); @@ -3393,9 +3393,9 @@ INT RT_CfgSetWPAPSKKey(IN RTMP_ADAPTER * pAd, IN UCHAR * pHashStr, IN INT hashStrLen, OUT PUCHAR pPMKBuf); -// -// Prototypes of function definition in cmm_info.c -// +/* */ +/* Prototypes of function definition in cmm_info.c */ +/* */ VOID RTMPWPARemoveAllKeys(IN PRTMP_ADAPTER pAd); VOID RTMPSetPhyMode(IN PRTMP_ADAPTER pAd, IN ULONG phymode); @@ -3478,9 +3478,9 @@ NDIS_STATUS RTMPSoftDecryptBroadCastData(IN PRTMP_ADAPTER pAd, VOID RTMPMakeRSNIE(IN PRTMP_ADAPTER pAd, IN UINT AuthMode, IN UINT WepStatus, IN UCHAR apidx); -// -// function prototype in ap_wpa.c -// +/* */ +/* function prototype in ap_wpa.c */ +/* */ VOID RTMPGetTxTscFromAsic(IN PRTMP_ADAPTER pAd, IN UCHAR apidx, OUT PUCHAR pTxTsc); @@ -3524,7 +3524,7 @@ VOID AES_GTK_KEY_WRAP(IN UCHAR * key, IN UCHAR * plaintext, IN UINT32 p_len, OUT UCHAR * ciphertext); -//typedef void (*TIMER_FUNCTION)(unsigned long); +/*typedef void (*TIMER_FUNCTION)(unsigned long); */ /* timeout -- ms */ VOID RTMP_SetPeriodicTimer(IN NDIS_MINIPORT_TIMER * pTimer, @@ -3675,7 +3675,7 @@ void ba_reordering_resource_release(PRTMP_ADAPTER pAd); PSTRING rstrtok(IN PSTRING s, IN const PSTRING ct); -////////// common ioctl functions ////////// +/*//////// common ioctl functions ////////// */ INT SetCommonHT(IN PRTMP_ADAPTER pAd); INT WpaCheckEapCode(IN PRTMP_ADAPTER pAd, @@ -3688,15 +3688,15 @@ int wext_notify_event_assoc(IN RTMP_ADAPTER * pAd); BOOLEAN STARxDoneInterruptHandle(IN PRTMP_ADAPTER pAd, IN BOOLEAN argc); -// AMPDU packet indication +/* AMPDU packet indication */ VOID Indicate_AMPDU_Packet(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID); -// AMSDU packet indication +/* AMSDU packet indication */ VOID Indicate_AMSDU_Packet(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID); -// Normal legacy Rx packet indication +/* Normal legacy Rx packet indication */ VOID Indicate_Legacy_Packet(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID); @@ -3711,7 +3711,7 @@ void wlan_802_11_to_802_3_packet(IN PRTMP_ADAPTER pAd, IN PUCHAR pHeader802_3, IN UCHAR FromWhichBSSID); -// remove LLC and get 802_3 Header +/* remove LLC and get 802_3 Header */ #define RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(_pRxBlk, _pHeader802_3) \ { \ PUCHAR _pRemovedLLCSNAP = NULL, _pDA, _pSA; \ @@ -3748,7 +3748,7 @@ VOID Sta_Announce_or_Forward_802_3_Packet(IN PRTMP_ADAPTER pAd, #define ANNOUNCE_OR_FORWARD_802_3_PACKET(_pAd, _pPacket, _FromWhichBSS)\ Sta_Announce_or_Forward_802_3_Packet(_pAd, _pPacket, _FromWhichBSS); - //announce_802_3_packet(_pAd, _pPacket); + /*announce_802_3_packet(_pAd, _pPacket); */ PNDIS_PACKET DuplicatePacket(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket, IN UCHAR FromWhichBSSID); @@ -3757,7 +3757,7 @@ PNDIS_PACKET ClonePacket(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket, IN PUCHAR pData, IN ULONG DataSize); -// Normal, AMPDU or AMSDU +/* Normal, AMPDU or AMSDU */ VOID CmmRxnonRalinkFrameIndicate(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID); @@ -3913,9 +3913,9 @@ INT RtmpRaDevCtrlInit(IN RTMP_ADAPTER * pAd, IN RTMP_INF_TYPE infType); BOOLEAN RtmpRaDevCtrlExit(IN RTMP_ADAPTER * pAd); #ifdef RTMP_MAC_PCI -// -// Function Prototype in cmm_data_pci.c -// +/* */ +/* Function Prototype in cmm_data_pci.c */ +/* */ USHORT RtmpPCI_WriteTxResource(IN PRTMP_ADAPTER pAd, IN TX_BLK * pTxBlk, IN BOOLEAN bIsLast, OUT USHORT * FreeNumber); @@ -3988,12 +3988,12 @@ VOID RT28xxPciStaAsicSleepThenAutoWakeup(IN PRTMP_ADAPTER pAd, VOID RT28xxPciMlmeRadioOn(IN PRTMP_ADAPTER pAd); VOID RT28xxPciMlmeRadioOFF(IN PRTMP_ADAPTER pAd); -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ #ifdef RTMP_MAC_USB -// -// Function Prototype in rtusb_bulk.c -// +/* */ +/* Function Prototype in rtusb_bulk.c */ +/* */ VOID RTUSBInitTxDesc(IN PRTMP_ADAPTER pAd, IN PTX_CONTEXT pTxContext, IN UCHAR BulkOutPipeId, IN usb_complete_t Func); @@ -4036,9 +4036,9 @@ VOID RTUSBInitRxDesc(IN PRTMP_ADAPTER pAd, IN PRX_CONTEXT pRxContext); VOID RTUSBBulkRxHandle(IN unsigned long data); -// -// Function Prototype in rtusb_io.c -// +/* */ +/* Function Prototype in rtusb_io.c */ +/* */ NTSTATUS RTUSBMultiRead(IN PRTMP_ADAPTER pAd, IN USHORT Offset, OUT PUCHAR pData, IN USHORT length); @@ -4152,9 +4152,9 @@ VOID RTUSBMlmeHardTransmit(IN PRTMP_ADAPTER pAd, IN PMGMT_STRUC pMgmt); INT MlmeThread(IN PVOID Context); -// -// Function Prototype in rtusb_data.c -// +/* */ +/* Function Prototype in rtusb_data.c */ +/* */ NDIS_STATUS RTUSBFreeDescriptorRequest(IN PRTMP_ADAPTER pAd, IN UCHAR BulkOutPipeId, IN UINT32 NumberRequired); @@ -4167,9 +4167,9 @@ VOID RTMPWriteTxInfo(IN PRTMP_ADAPTER pAd, IN BOOLEAN bWiv, IN UCHAR QueueSel, IN UCHAR NextValid, IN UCHAR TxBurst); -// -// Function Prototype in cmm_data_usb.c -// +/* */ +/* Function Prototype in cmm_data_usb.c */ +/* */ USHORT RtmpUSB_WriteSubTxResource(IN PRTMP_ADAPTER pAd, IN TX_BLK * pTxBlk, IN BOOLEAN bIsLast, OUT USHORT * FreeNumber); @@ -4219,7 +4219,7 @@ VOID RT28xxUsbStaAsicSleepThenAutoWakeup(IN PRTMP_ADAPTER pAd, VOID RT28xxUsbMlmeRadioOn(IN PRTMP_ADAPTER pAd); VOID RT28xxUsbMlmeRadioOFF(IN PRTMP_ADAPTER pAd); -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ VOID AsicTurnOffRFClk(IN PRTMP_ADAPTER pAd, IN UCHAR Channel); @@ -4237,7 +4237,7 @@ BOOLEAN RtmpTimerQRemove(IN RTMP_ADAPTER * pAd, void RtmpTimerQExit(IN RTMP_ADAPTER * pAd); void RtmpTimerQInit(IN RTMP_ADAPTER * pAd); -#endif // RTMP_TIMER_TASK_SUPPORT // +#endif /* RTMP_TIMER_TASK_SUPPORT // */ VOID AsicStaBbpTuning(IN PRTMP_ADAPTER pAd); @@ -4291,7 +4291,7 @@ __inline VOID VIRTUAL_IF_DOWN(PRTMP_ADAPTER pAd) rt28xx_close(pAd->net_dev); return; } -#endif // LINUX // +#endif /* LINUX // */ /* OS Related funciton prototype definitions. @@ -4353,4 +4353,4 @@ int RtmpOSFileRead(IN RTMP_OS_FD osfd, IN char *pDataPtr, IN int readLen); int RtmpOSFileWrite(IN RTMP_OS_FD osfd, IN char *pDataPtr, IN int writeLen); -#endif // __RTMP_H__ +#endif /* __RTMP_H__ */ |