aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250.c2
-rw-r--r--drivers/tty/serial/8250_pci.c9
-rw-r--r--drivers/tty/serial/amba-pl011.c15
-rw-r--r--drivers/tty/serial/ifx6x60.c1
-rw-r--r--drivers/tty/serial/mxs-auart.c2
-rw-r--r--drivers/tty/serial/pch_uart.c21
-rw-r--r--drivers/tty/serial/serial_core.c1
7 files changed, 40 insertions, 11 deletions
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index d1ccd3a..26885e6 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -81,7 +81,7 @@ static unsigned int skip_txen_test; /* force skip of txen test at init time */
#define DEBUG_INTR(fmt...) do { } while (0)
#endif
-#define PASS_LIMIT 256
+#define PASS_LIMIT 512
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 21098ed..3411ed3 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -1011,6 +1011,8 @@ static int pci_eg20t_init(struct pci_dev *dev)
#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208
#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
+#define PCI_SUBDEVICE_ID_SIIG_DUAL_00 0x2500
+#define PCI_SUBDEVICE_ID_SIIG_DUAL_30 0x2530
#define PCI_VENDOR_ID_ADVANTECH 0x13fe
#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620
@@ -3009,8 +3011,11 @@ static struct pci_device_id serial_pci_tbl[] = {
* For now just used the hex ID 0x950a.
*/
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
- PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0,
- pbn_b0_2_115200 },
+ PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_00,
+ 0, 0, pbn_b0_2_115200 },
+ { PCI_VENDOR_ID_OXSEMI, 0x950a,
+ PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_30,
+ 0, 0, pbn_b0_2_115200 },
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_2_1130000 },
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 21dc4b7..7cbb367 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1620,13 +1620,26 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
old_cr &= ~ST_UART011_CR_OVSFACT;
}
+ /*
+ * Workaround for the ST Micro oversampling variants to
+ * increase the bitrate slightly, by lowering the divisor,
+ * to avoid delayed sampling of start bit at high speeds,
+ * else we see data corruption.
+ */
+ if (uap->vendor->oversampling) {
+ if ((baud >= 3000000) && (baud < 3250000) && (quot > 1))
+ quot -= 1;
+ else if ((baud > 3250000) && (quot > 2))
+ quot -= 2;
+ }
/* Set baud rate */
writew(quot & 0x3f, port->membase + UART011_FBRD);
writew(quot >> 6, port->membase + UART011_IBRD);
/*
* ----------v----------v----------v----------v-----
- * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
+ * NOTE: lcrh_tx and lcrh_rx MUST BE WRITTEN AFTER
+ * UART011_FBRD & UART011_IBRD.
* ----------^----------^----------^----------^-----
*/
writew(lcr_h, port->membase + uap->lcrh_rx);
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 5315525..5d0d4f6 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -551,6 +551,7 @@ static void ifx_port_shutdown(struct tty_port *port)
container_of(port, struct ifx_spi_device, tty_port);
mrdy_set_low(ifx_dev);
+ del_timer(&ifx_dev->spi_timer);
clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
tasklet_kill(&ifx_dev->io_work_tasklet);
}
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 7e02c9c..5b3d063 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -368,6 +368,8 @@ static void mxs_auart_settermios(struct uart_port *u,
writel(ctrl, u->membase + AUART_LINECTRL);
writel(ctrl2, u->membase + AUART_CTRL2);
+
+ uart_update_timeout(u, termios->c_cflag, baud);
}
static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 101eda9..73038ba 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -658,7 +658,8 @@ static void pch_dma_rx_complete(void *arg)
tty_flip_buffer_push(tty);
tty_kref_put(tty);
async_tx_ack(priv->desc_rx);
- pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
}
static void pch_dma_tx_complete(void *arg)
@@ -713,7 +714,8 @@ static int handle_rx_to(struct eg20t_port *priv)
int rx_size;
int ret;
if (!priv->start_rx) {
- pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
return 0;
}
buf = &priv->rxbuf;
@@ -975,11 +977,13 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
case PCH_UART_IID_RDR: /* Received Data Ready */
if (priv->use_dma) {
pch_uart_hal_disable_interrupt(priv,
- PCH_UART_HAL_RX_INT);
+ PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
ret = dma_handle_rx(priv);
if (!ret)
pch_uart_hal_enable_interrupt(priv,
- PCH_UART_HAL_RX_INT);
+ PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
} else {
ret = handle_rx(priv);
}
@@ -1105,7 +1109,8 @@ static void pch_uart_stop_rx(struct uart_port *port)
struct eg20t_port *priv;
priv = container_of(port, struct eg20t_port, port);
priv->start_rx = 0;
- pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
priv->int_dis_flag = 1;
}
@@ -1161,6 +1166,7 @@ static int pch_uart_startup(struct uart_port *port)
break;
case 16:
fifo_size = PCH_UART_HAL_FIFO16;
+ break;
case 1:
default:
fifo_size = PCH_UART_HAL_FIFO_DIS;
@@ -1198,7 +1204,8 @@ static int pch_uart_startup(struct uart_port *port)
pch_request_dma(port);
priv->start_rx = 1;
- pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
uart_update_timeout(port, CS8, default_baud);
return 0;
@@ -1256,7 +1263,7 @@ static void pch_uart_set_termios(struct uart_port *port,
stb = PCH_UART_HAL_STB1;
if (termios->c_cflag & PARENB) {
- if (!(termios->c_cflag & PARODD))
+ if (termios->c_cflag & PARODD)
parity = PCH_UART_HAL_PARITY_ODD;
else
parity = PCH_UART_HAL_PARITY_EVEN;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 65db939..675c9f8 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2339,6 +2339,7 @@ void uart_unregister_driver(struct uart_driver *drv)
tty_unregister_driver(p);
put_tty_driver(p);
kfree(drv->state);
+ drv->state = NULL;
drv->tty_driver = NULL;
}
generated by cgit v1.1 at 2024-05-25 16:20:19 +0000