diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 47 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_crtn.h | 1 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_els.c | 6 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_hbadisc.c | 22 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 22 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_mbox.c | 632 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_nportdisc.c | 13 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 505 |
8 files changed, 1101 insertions, 147 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 82016fc..463104d 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -507,12 +507,14 @@ lpfc_issue_lip(struct Scsi_Host *shost) return -ENOMEM; memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t)); - pmboxq->mb.mbxCommand = MBX_DOWN_LINK; - pmboxq->mb.mbxOwner = OWN_HOST; + pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK; + pmboxq->u.mb.mbxOwner = OWN_HOST; mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2); - if ((mbxstatus == MBX_SUCCESS) && (pmboxq->mb.mbxStatus == 0)) { + if ((mbxstatus == MBX_SUCCESS) && + (pmboxq->u.mb.mbxStatus == 0 || + pmboxq->u.mb.mbxStatus == MBXERR_LINK_DOWN)) { memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t)); lpfc_init_link(phba, pmboxq, phba->cfg_topology, phba->cfg_link_speed); @@ -791,7 +793,8 @@ lpfc_get_hba_info(struct lpfc_hba *phba, uint32_t *mrpi, uint32_t *arpi, uint32_t *mvpi, uint32_t *avpi) { - struct lpfc_sli *psli = &phba->sli; + struct lpfc_sli *psli = &phba->sli; + struct lpfc_mbx_read_config *rd_config; LPFC_MBOXQ_t *pmboxq; MAILBOX_t *pmb; int rc = 0; @@ -813,7 +816,7 @@ lpfc_get_hba_info(struct lpfc_hba *phba, return 0; memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t)); - pmb = &pmboxq->mb; + pmb = &pmboxq->u.mb; pmb->mbxCommand = MBX_READ_CONFIG; pmb->mbxOwner = OWN_HOST; pmboxq->context1 = NULL; @@ -3247,7 +3250,7 @@ sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr, } } - memcpy((uint8_t *) & phba->sysfs_mbox.mbox->mb + off, + memcpy((uint8_t *) &phba->sysfs_mbox.mbox->u.mb + off, buf, count); phba->sysfs_mbox.offset = off + count; @@ -3289,6 +3292,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; int rc; + MAILBOX_t *pmb; if (off > MAILBOX_CMD_SIZE) return -ERANGE; @@ -3313,8 +3317,8 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, if (off == 0 && phba->sysfs_mbox.state == SMBOX_WRITING && phba->sysfs_mbox.offset >= 2 * sizeof(uint32_t)) { - - switch (phba->sysfs_mbox.mbox->mb.mbxCommand) { + pmb = &phba->sysfs_mbox.mbox->u.mb; + switch (pmb->mbxCommand) { /* Offline only */ case MBX_INIT_LINK: case MBX_DOWN_LINK: @@ -3331,7 +3335,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, if (!(vport->fc_flag & FC_OFFLINE_MODE)) { printk(KERN_WARNING "mbox_read:Command 0x%x " "is illegal in on-line state\n", - phba->sysfs_mbox.mbox->mb.mbxCommand); + pmb->mbxCommand); sysfs_mbox_idle(phba); spin_unlock_irq(&phba->hbalock); return -EPERM; @@ -3367,13 +3371,13 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, case MBX_CONFIG_PORT: case MBX_RUN_BIU_DIAG: printk(KERN_WARNING "mbox_read: Illegal Command 0x%x\n", - phba->sysfs_mbox.mbox->mb.mbxCommand); + pmb->mbxCommand); sysfs_mbox_idle(phba); spin_unlock_irq(&phba->hbalock); return -EPERM; default: printk(KERN_WARNING "mbox_read: Unknown Command 0x%x\n", - phba->sysfs_mbox.mbox->mb.mbxCommand); + pmb->mbxCommand); sysfs_mbox_idle(phba); spin_unlock_irq(&phba->hbalock); return -EPERM; @@ -3383,14 +3387,14 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, * or RESTART mailbox commands until the HBA is restarted. */ if (phba->pport->stopped && - phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_DUMP_MEMORY && - phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_RESTART && - phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_VPARMS && - phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_WWN) + pmb->mbxCommand != MBX_DUMP_MEMORY && + pmb->mbxCommand != MBX_RESTART && + pmb->mbxCommand != MBX_WRITE_VPARMS && + pmb->mbxCommand != MBX_WRITE_WWN) lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, "1259 mbox: Issued mailbox cmd " "0x%x while in stopped state.\n", - phba->sysfs_mbox.mbox->mb.mbxCommand); + pmb->mbxCommand); phba->sysfs_mbox.mbox->vport = vport; @@ -3416,8 +3420,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, spin_unlock_irq(&phba->hbalock); rc = lpfc_sli_issue_mbox_wait (phba, phba->sysfs_mbox.mbox, - lpfc_mbox_tmo_val(phba, - phba->sysfs_mbox.mbox->mb.mbxCommand) * HZ); + lpfc_mbox_tmo_val(phba, pmb->mbxCommand) * HZ); spin_lock_irq(&phba->hbalock); } @@ -3439,7 +3442,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, return -EAGAIN; } - memcpy(buf, (uint8_t *) & phba->sysfs_mbox.mbox->mb + off, count); + memcpy(buf, (uint8_t *) &pmb + off, count); phba->sysfs_mbox.offset = off + count; @@ -3711,14 +3714,14 @@ lpfc_get_stats(struct Scsi_Host *shost) return NULL; memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t)); - pmb = &pmboxq->mb; + pmb = &pmboxq->u.mb; pmb->mbxCommand = MBX_READ_STATUS; pmb->mbxOwner = OWN_HOST; pmboxq->context1 = NULL; pmboxq->vport = vport; if ((vport->fc_flag & FC_OFFLINE_MODE) || - (!(psli->sli_flag & LPFC_SLI2_ACTIVE))) + (!(psli->sli_flag & LPFC_SLI_ACTIVE))) rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); else rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); @@ -3817,7 +3820,7 @@ lpfc_reset_stats(struct Scsi_Host *shost) return; memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); - pmb = &pmboxq->mb; + pmb = &pmboxq->u.mb; pmb->mbxCommand = MBX_READ_STATUS; pmb->mbxOwner = OWN_HOST; pmb->un.varWords[0] = 0x1; /* reset request */ diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 3802e45..e0f1cd4 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -209,6 +209,7 @@ void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *); uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *); void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t, uint32_t); +void lpfc_sli_wake_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_reset_barrier(struct lpfc_hba * phba); int lpfc_sli_brdready(struct lpfc_hba *, uint32_t); diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 9fe36bf..2c034a5 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -4277,7 +4277,7 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, lpfc_init_link(phba, mbox, phba->cfg_topology, phba->cfg_link_speed); - mbox->mb.un.varInitLnk.lipsr_AL_PA = 0; + mbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->vport = vport; rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); @@ -4426,7 +4426,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) uint16_t xri, status; uint32_t cmdsize; - mb = &pmb->mb; + mb = &pmb->u.mb; ndlp = (struct lpfc_nodelist *) pmb->context2; xri = (uint16_t) ((unsigned long)(pmb->context1)); @@ -5755,7 +5755,7 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) struct lpfc_vport *vport = pmb->vport; struct Scsi_Host *shost = lpfc_shost_from_vport(vport); struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2; - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; spin_lock_irq(shost->host_lock); vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 0fc6600..2270d9a 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -879,7 +879,7 @@ lpfc_mbx_cmpl_clear_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) struct lpfc_vport *vport = pmb->vport; struct Scsi_Host *shost = lpfc_shost_from_vport(vport); struct lpfc_sli *psli = &phba->sli; - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; uint32_t control; /* Since we don't do discovery right now, turn these off here */ @@ -942,7 +942,7 @@ lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { struct lpfc_vport *vport = pmb->vport; - if (pmb->mb.mbxStatus) + if (pmb->u.mb.mbxStatus) goto out; mempool_free(pmb, phba->mbox_mem_pool); @@ -970,7 +970,7 @@ out: lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, "0306 CONFIG_LINK mbxStatus error x%x " "HBA state x%x\n", - pmb->mb.mbxStatus, vport->port_state); + pmb->u.mb.mbxStatus, vport->port_state); mempool_free(pmb, phba->mbox_mem_pool); lpfc_linkdown(phba); @@ -1202,7 +1202,7 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) struct lpfc_vport *vport = pmb->vport; struct Scsi_Host *shost = lpfc_shost_from_vport(vport); READ_LA_VAR *la; - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1); /* Unblock ELS traffic */ @@ -1217,7 +1217,7 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) goto lpfc_mbx_cmpl_read_la_free_mbuf; } - la = (READ_LA_VAR *) & pmb->mb.un.varReadLA; + la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA; memcpy(&phba->alpa_map[0], mp->virt, 128); @@ -1355,7 +1355,7 @@ lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) static void lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; struct lpfc_vport *vport = pmb->vport; struct Scsi_Host *shost = lpfc_shost_from_vport(vport); @@ -1408,7 +1408,7 @@ lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { struct lpfc_vport *vport = pmb->vport; struct Scsi_Host *shost = lpfc_shost_from_vport(vport); - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; switch (mb->mbxStatus) { case 0x0011: @@ -2279,7 +2279,7 @@ lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) /* cleanup any ndlp on mbox q waiting for reglogin cmpl */ if ((mb = phba->sli.mbox_active)) { - if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) && + if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) && (ndlp == (struct lpfc_nodelist *) mb->context2)) { mb->context2 = NULL; mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; @@ -2288,7 +2288,7 @@ lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) spin_lock_irq(&phba->hbalock); list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) { - if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) && + if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) && (ndlp == (struct lpfc_nodelist *) mb->context2)) { mp = (struct lpfc_dmabuf *) (mb->context1); if (mp) { @@ -2970,7 +2970,7 @@ restart_disc: lpfc_linkdown(phba); lpfc_init_link(phba, initlinkmbox, phba->cfg_topology, phba->cfg_link_speed); - initlinkmbox->mb.un.varInitLnk.lipsr_AL_PA = 0; + initlinkmbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0; initlinkmbox->vport = vport; initlinkmbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; rc = lpfc_sli_issue_mbox(phba, initlinkmbox, MBX_NOWAIT); @@ -3069,7 +3069,7 @@ restart_disc: void lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1); struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2; struct lpfc_vport *vport = pmb->vport; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index e9e4a1d..ff821bb 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -108,7 +108,7 @@ lpfc_config_port_prep(struct lpfc_hba *phba) return -ENOMEM; } - mb = &pmb->mb; + mb = &pmb->u.mb; phba->link_state = LPFC_INIT_MBX_CMDS; if (lpfc_is_LC_HBA(phba->pcidev->device)) { @@ -221,6 +221,11 @@ lpfc_config_port_prep(struct lpfc_hba *phba) mb->mbxCommand, mb->mbxStatus); mb->un.varDmp.word_cnt = 0; } + /* dump mem may return a zero when finished or we got a + * mailbox error, either way we are done. + */ + if (mb->un.varDmp.word_cnt == 0) + break; if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset) mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset; lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET, @@ -249,7 +254,7 @@ out_free_mbox: static void lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) { - if (pmboxq->mb.mbxStatus == MBX_SUCCESS) + if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS) phba->temp_sensor_support = 1; else phba->temp_sensor_support = 0; @@ -276,7 +281,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) /* character array used for decoding dist type. */ char dist_char[] = "nabx"; - if (pmboxq->mb.mbxStatus != MBX_SUCCESS) { + if (pmboxq->u.mb.mbxStatus != MBX_SUCCESS) { mempool_free(pmboxq, phba->mbox_mem_pool); return; } @@ -284,7 +289,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) prg = (struct prog_id *) &prog_id_word; /* word 7 contain option rom version */ - prog_id_word = pmboxq->mb.un.varWords[7]; + prog_id_word = pmboxq->u.mb.un.varWords[7]; /* Decode the Option rom version word to a readable string */ if (prg->dist < 4) @@ -341,7 +346,7 @@ lpfc_config_port_post(struct lpfc_hba *phba) phba->link_state = LPFC_HBA_ERROR; return -ENOMEM; } - mb = &pmb->mb; + mb = &pmb->u.mb; /* Get login parameters for NID. */ lpfc_read_sparam(phba, pmb, 0); @@ -476,17 +481,18 @@ lpfc_config_port_post(struct lpfc_hba *phba) lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, "0352 Config MSI mailbox command " "failed, mbxCmd x%x, mbxStatus x%x\n", - pmb->mb.mbxCommand, pmb->mb.mbxStatus); + pmb->u.mb.mbxCommand, + pmb->u.mb.mbxStatus); mempool_free(pmb, phba->mbox_mem_pool); return -EIO; } } + spin_lock_irq(&phba->hbalock); /* Initialize ERATT handling flag */ phba->hba_flag &= ~HBA_ERATT_HANDLED; /* Enable appropriate host interrupts */ - spin_lock_irq(&phba->hbalock); status = readl(phba->HCregaddr); status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA; if (psli->num_rings > 0) @@ -2201,7 +2207,7 @@ lpfc_offline_prep(struct lpfc_hba * phba) } lpfc_destroy_vport_work_array(phba, vports); - lpfc_sli_flush_mbox_queue(phba); + lpfc_sli_mbox_sys_shutdown(phba); } /** diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 7f5899b..6aeb1c6 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -60,7 +60,7 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset) MAILBOX_t *mb; void *ctx; - mb = &pmb->mb; + mb = &pmb->u.mb; ctx = pmb->context2; /* Setup to dump VPD region */ @@ -92,7 +92,7 @@ lpfc_dump_wakeup_param(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) MAILBOX_t *mb; void *ctx; - mb = &pmb->mb; + mb = &pmb->u.mb; /* Save context so that we can restore after memset */ ctx = pmb->context2; @@ -127,7 +127,7 @@ lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->mbxCommand = MBX_READ_NV; mb->mbxOwner = OWN_HOST; @@ -153,7 +153,7 @@ lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->mbxCommand = MBX_ASYNCEVT_ENABLE; mb->un.varCfgAsyncEvent.ring = ring; @@ -179,7 +179,7 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->mbxCommand = MBX_HEARTBEAT; mb->mbxOwner = OWN_HOST; @@ -213,7 +213,7 @@ lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp) struct lpfc_sli *psli; psli = &phba->sli; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); INIT_LIST_HEAD(&mp->list); @@ -250,7 +250,7 @@ lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->un.varClearLA.eventTag = phba->fc_eventTag; @@ -277,7 +277,7 @@ void lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { struct lpfc_vport *vport = phba->pport; - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); /* NEW_FEATURE @@ -323,7 +323,7 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) int lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; uint32_t attentionConditions[2]; /* Sanity check */ @@ -407,7 +407,7 @@ lpfc_init_link(struct lpfc_hba * phba, struct lpfc_sli *psli; MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); psli = &phba->sli; @@ -494,7 +494,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) struct lpfc_sli *psli; psli = &phba->sli; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->mbxOwner = OWN_HOST; @@ -517,7 +517,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) mb->un.varRdSparm.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm); mb->un.varRdSparm.un.sp64.addrHigh = putPaddrHigh(mp->phys); mb->un.varRdSparm.un.sp64.addrLow = putPaddrLow(mp->phys); - mb->un.varRdSparm.vpi = vpi; + mb->un.varRdSparm.vpi = vpi + phba->vpi_base; /* save address for completion */ pmb->context1 = mp; @@ -546,10 +546,12 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did, { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->un.varUnregDID.did = did; + if (vpi != 0xffff) + vpi += phba->vpi_base; mb->un.varUnregDID.vpi = vpi; mb->mbxCommand = MBX_UNREG_D_ID; @@ -575,7 +577,7 @@ lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->mbxCommand = MBX_READ_CONFIG; @@ -600,7 +602,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->mbxCommand = MBX_READ_LNK_STAT; @@ -609,7 +611,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_reg_login - Prepare a mailbox command for registering remote login + * lpfc_reg_rpi - Prepare a mailbox command for registering remote login * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @did: remote port identifier. @@ -633,17 +635,23 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) * 1 - DMA memory allocation failed **/ int -lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, +lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, uint8_t *param, LPFC_MBOXQ_t *pmb, uint32_t flag) { - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; uint8_t *sparam; struct lpfc_dmabuf *mp; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->un.varRegLogin.rpi = 0; - mb->un.varRegLogin.vpi = vpi; + if (phba->sli_rev == LPFC_SLI_REV4) { + mb->un.varRegLogin.rpi = lpfc_sli4_alloc_rpi(phba); + if (mb->un.varRegLogin.rpi == LPFC_RPI_ALLOC_ERROR) + return 1; + } + + mb->un.varRegLogin.vpi = vpi + phba->vpi_base; mb->un.varRegLogin.did = did; mb->un.varWords[30] = flag; /* Set flag to issue action on cmpl */ @@ -699,15 +707,16 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->un.varUnregLogin.rpi = (uint16_t) rpi; mb->un.varUnregLogin.rsvd1 = 0; - mb->un.varUnregLogin.vpi = vpi; + mb->un.varUnregLogin.vpi = vpi + phba->vpi_base; mb->mbxCommand = MBX_UNREG_LOGIN; mb->mbxOwner = OWN_HOST; + return; } @@ -727,15 +736,15 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, * This routine prepares the mailbox command for registering a virtual N_Port. **/ void -lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid, - LPFC_MBOXQ_t *pmb) +lpfc_reg_vpi(struct lpfc_vport *vport, LPFC_MBOXQ_t *pmb) { - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); - mb->un.varRegVpi.vpi = vpi; - mb->un.varRegVpi.sid = sid; + mb->un.varRegVpi.vpi = vport->vpi + vport->phba->vpi_base; + mb->un.varRegVpi.sid = vport->fc_myDID; + mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base; mb->mbxCommand = MBX_REG_VPI; mb->mbxOwner = OWN_HOST; @@ -762,10 +771,10 @@ lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid, void lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb) { - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); - mb->un.varUnregVpi.vpi = vpi; + mb->un.varUnregVpi.vpi = vpi + phba->vpi_base; mb->mbxCommand = MBX_UNREG_VPI; mb->mbxOwner = OWN_HOST; @@ -854,7 +863,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba) void lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->un.varRdRev.cv = 1; mb->un.varRdRev.v3req = 1; /* Request SLI3 info */ @@ -947,7 +956,7 @@ lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id, uint32_t hbq_entry_index, LPFC_MBOXQ_t *pmb) { int i; - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; struct config_hbq_var *hbqmb = &mb->un.varCfgHbq; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); @@ -1022,7 +1031,7 @@ void lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb) { int i; - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; struct lpfc_sli *psli; struct lpfc_sli_ring *pring; @@ -1077,7 +1086,7 @@ void lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { MAILBOX_t __iomem *mb_slim = (MAILBOX_t __iomem *) phba->MBslimaddr; - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; dma_addr_t pdma_addr; uint32_t bar_low, bar_high; size_t offset; @@ -1101,21 +1110,22 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) /* If HBA supports SLI=3 ask for it */ - if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) { + if (phba->sli_rev == LPFC_SLI_REV3 && phba->vpd.sli3Feat.cerbm) { if (phba->cfg_enable_bg) mb->un.varCfgPort.cbg = 1; /* configure BlockGuard */ + mb->un.varCfgPort.cdss = 1; /* Configure Security */ mb->un.varCfgPort.cerbm = 1; /* Request HBQs */ mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */ mb->un.varCfgPort.cinb = 1; /* Interrupt Notification Block */ mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count(); if (phba->max_vpi && phba->cfg_enable_npiv && phba->vpd.sli3Feat.cmv) { - mb->un.varCfgPort.max_vpi = phba->max_vpi; + mb->un.varCfgPort.max_vpi = LPFC_MAX_VPI; mb->un.varCfgPort.cmv = 1; } else mb->un.varCfgPort.max_vpi = phba->max_vpi = 0; } else - phba->sli_rev = 2; + phba->sli_rev = LPFC_SLI_REV2; mb->un.varCfgPort.sli_mode = phba->sli_rev; /* Now setup pcb */ @@ -1247,7 +1257,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) void lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; memset(pmb, 0, sizeof(LPFC_MBOXQ_t)); mb->mbxCommand = MBX_KILL_BOARD; @@ -1307,29 +1317,98 @@ lpfc_mbox_get(struct lpfc_hba * phba) } /** + * __lpfc_mbox_cmpl_put - Put mailbox cmd into mailbox cmd complete list + * @phba: pointer to lpfc hba data structure. + * @mbq: pointer to the driver internal queue element for mailbox command. + * + * This routine put the completed mailbox command into the mailbox command + * complete list. This is the unlocked version of the routine. The mailbox + * complete list is used by the driver worker thread to process mailbox + * complete callback functions outside the driver interrupt handler. + **/ +void +__lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq) +{ + list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl); +} + +/** * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list * @phba: pointer to lpfc hba data structure. * @mbq: pointer to the driver internal queue element for mailbox command. * * This routine put the completed mailbox command into the mailbox command - * complete list. This routine is called from driver interrupt handler - * context.The mailbox complete list is used by the driver worker thread - * to process mailbox complete callback functions outside the driver interrupt - * handler. + * complete list. This is the locked version of the routine. The mailbox + * complete list is used by the driver worker thread to process mailbox + * complete callback functions outside the driver interrupt handler. **/ void -lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) +lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq) { unsigned long iflag; /* This function expects to be called from interrupt context */ spin_lock_irqsave(&phba->hbalock, iflag); - list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl); + __lpfc_mbox_cmpl_put(phba, mbq); spin_unlock_irqrestore(&phba->hbalock, iflag); return; } /** + * lpfc_mbox_cmd_check - Check the validality of a mailbox command + * @phba: pointer to lpfc hba data structure. + * @mboxq: pointer to the driver internal queue element for mailbox command. + * + * This routine is to check whether a mailbox command is valid to be issued. + * This check will be performed by both the mailbox issue API when a client + * is to issue a mailbox command to the mailbox transport. + * + * Return 0 - pass the check, -ENODEV - fail the check + **/ +int +lpfc_mbox_cmd_check(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) +{ + /* Mailbox command that have a completion handler must also have a + * vport specified. + */ + if (mboxq->mbox_cmpl && mboxq->mbox_cmpl != lpfc_sli_def_mbox_cmpl && + mboxq->mbox_cmpl != lpfc_sli_wake_mbox_wait) { + if (!mboxq->vport) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_VPORT, + "1814 Mbox x%x failed, no vport\n", + mboxq->u.mb.mbxCommand); + dump_stack(); + return -ENODEV; + } + } + return 0; +} + +/** + * lpfc_mbox_dev_check - Check the device state for issuing a mailbox command + * @phba: pointer to lpfc hba data structure. + * + * This routine is to check whether the HBA device is ready for posting a + * mailbox command. It is used by the mailbox transport API at the time the + * to post a mailbox command to the device. + * + * Return 0 - pass the check, -ENODEV - fail the check + **/ +int +lpfc_mbox_dev_check(struct lpfc_hba *phba) +{ + /* If the PCI channel is in offline state, do not issue mbox */ + if (unlikely(pci_channel_offline(phba->pcidev))) + return -ENODEV; + + /* If the HBA is in error state, do not issue mbox */ + if (phba->link_state == LPFC_HBA_ERROR) + return -ENODEV; + + return 0; +} + +/** * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value * @phba: pointer to lpfc hba data structure. * @cmd: mailbox command code. @@ -1352,6 +1431,475 @@ lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd) case MBX_WRITE_WWN: /* 0x98 */ case MBX_LOAD_EXP_ROM: /* 0x9C */ return LPFC_MBOX_TMO_FLASH_CMD; + case MBX_SLI4_CONFIG: /* 0x9b */ + return LPFC_MBOX_SLI4_CONFIG_TMO; } return LPFC_MBOX_TMO; } + +/** + * lpfc_sli4_mbx_sge_set - Set a sge entry in non-embedded mailbox command + * @mbox: pointer to lpfc mbox command. + * @sgentry: sge entry index. + * @phyaddr: physical address for the sge + * @length: Length of the sge. + * + * This routine sets up an entry in the non-embedded mailbox command at the sge + * index location. + **/ +void +lpfc_sli4_mbx_sge_set(struct lpfcMboxq *mbox, uint32_t sgentry, + dma_addr_t phyaddr, uint32_t length) +{ + struct lpfc_mbx_nembed_cmd *nembed_sge; + + nembed_sge = (struct lpfc_mbx_nembed_cmd *) + &mbox->u.mqe.un.nembed_cmd; + nembed_sge->sge[sgentry].pa_lo = putPaddrLow(phyaddr); + nembed_sge->sge[sgentry].pa_hi = putPaddrHigh(phyaddr); + nembed_sge->sge[sgentry].length = length; +} + +/** + * lpfc_sli4_mbx_sge_get - Get a sge entry from non-embedded mailbox command + * @mbox: pointer to lpfc mbox command. + * @sgentry: sge entry index. + * + * This routine gets an entry from the non-embedded mailbox command at the sge + * index location. + **/ +void +lpfc_sli4_mbx_sge_get(struct lpfcMboxq *mbox, uint32_t sgentry, + struct lpfc_mbx_sge *sge) +{ + struct lpfc_mbx_nembed_cmd *nembed_sge; + + nembed_sge = (struct lpfc_mbx_nembed_cmd *) + &mbox->u.mqe.un.nembed_cmd; + sge->pa_lo = nembed_sge->sge[sgentry].pa_lo; + sge->pa_hi = nembed_sge->sge[sgentry].pa_hi; + sge->length = nembed_sge->sge[sgentry].length; +} + +/** + * lpfc_sli4_mbox_cmd_free - Free a sli4 mailbox command + * @phba: pointer to lpfc hba data structure. + * @mbox: pointer to lpfc mbox command. + * + * This routine frees SLI4 specific mailbox command for sending IOCTL command. + **/ +void +lpfc_sli4_mbox_cmd_free(struct lpfc_hba *phba, struct lpfcMboxq *mbox) +{ + struct lpfc_mbx_sli4_config *sli4_cfg; + struct lpfc_mbx_sge sge; + dma_addr_t phyaddr; + uint32_t sgecount, sgentry; + + sli4_cfg = &mbox->u.mqe.un.sli4_config; + + /* For embedded mbox command, just free the mbox command */ + if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) { + mempool_free(mbox, phba->mbox_mem_pool); + return; + } + + /* For non-embedded mbox command, we need to free the pages first */ + sgecount = bf_get(lpfc_mbox_hdr_sge_cnt, &sli4_cfg->header.cfg_mhdr); + /* There is nothing we can do if there is no sge address array */ + if (unlikely(!mbox->sge_array)) { + mempool_free(mbox, phba->mbox_mem_pool); + return; + } + /* Each non-embedded DMA memory was allocated in the length of a page */ + for (sgentry = 0; sgentry < sgecount; sgentry++) { + lpfc_sli4_mbx_sge_get(mbox, sgentry, &sge); + phyaddr = getPaddr(sge.pa_hi, sge.pa_lo); + dma_free_coherent(&phba->pcidev->dev, PAGE_SIZE, + mbox->sge_array->addr[sgentry], phyaddr); + } + /* Free the sge address array memory */ + kfree(mbox->sge_array); + /* Finally, free the mailbox command itself */ + mempool_free(mbox, phba->mbox_mem_pool); +} + +/** + * lpfc_sli4_config - Initialize the SLI4 Config Mailbox command + * @phba: pointer to lpfc hba data structure. + * @mbox: pointer to lpfc mbox command. + * @subsystem: The sli4 config sub mailbox subsystem. + * @opcode: The sli4 config sub mailbox command opcode. + * @length: Length of the sli4 config mailbox command. + * + * This routine sets up the header fields of SLI4 specific mailbox command + * for sending IOCTL command. + * + * Return: the actual length of the mbox command allocated (mostly useful + * for none embedded mailbox command). + **/ +int +lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox, + uint8_t subsystem, uint8_t opcode, uint32_t length, bool emb) +{ + struct lpfc_mbx_sli4_config *sli4_config; + union lpfc_sli4_cfg_shdr *cfg_shdr = NULL; + uint32_t alloc_len; + uint32_t resid_len; + uint32_t pagen, pcount; + void *viraddr; + dma_addr_t phyaddr; + + /* Set up SLI4 mailbox command header fields */ + memset(mbox, 0, sizeof(*mbox)); + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_SLI4_CONFIG); + + /* Set up SLI4 ioctl command header fields */ + sli4_config = &mbox->u.mqe.un.sli4_config; + + /* Setup for the embedded mbox command */ + if (emb) { + /* Set up main header fields */ + bf_set(lpfc_mbox_hdr_emb, &sli4_config->header.cfg_mhdr, 1); + sli4_config->header.cfg_mhdr.payload_length = + LPFC_MBX_CMD_HDR_LENGTH + length; + /* Set up sub-header fields following main header */ + bf_set(lpfc_mbox_hdr_opcode, + &sli4_config->header.cfg_shdr.request, opcode); + bf_set(lpfc_mbox_hdr_subsystem, + &sli4_config->header.cfg_shdr.request, subsystem); + sli4_config->header.cfg_shdr.request.request_length = length; + return length; + } + + /* Setup for the none-embedded mbox command */ + pcount = (PAGE_ALIGN(length))/PAGE_SIZE; + pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ? + LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount; + /* Allocate record for keeping SGE virtual addresses */ + mbox->sge_array = kmalloc(sizeof(struct lpfc_mbx_nembed_sge_virt), + GFP_KERNEL); + if (!mbox->sge_array) + return 0; + + for (pagen = 0, alloc_len = 0; pagen < pcount; pagen++) { + /* The DMA memory is always allocated in the length of a + * page even though the last SGE might not fill up to a + * page, this is used as a priori size of PAGE_SIZE for + * the later DMA memory free. + */ + viraddr = dma_alloc_coherent(&phba->pcidev->dev, PAGE_SIZE, + &phyaddr, GFP_KERNEL); + /* In case of malloc fails, proceed with whatever we have */ + if (!viraddr) + break; + mbox->sge_array->addr[pagen] = viraddr; + /* Keep the first page for later sub-header construction */ + if (pagen == 0) + cfg_shdr = (union lpfc_sli4_cfg_shdr *)viraddr; + resid_len = length - alloc_len; + if (resid_len > PAGE_SIZE) { + lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr, + PAGE_SIZE); + alloc_len += PAGE_SIZE; + } else { + lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr, + resid_len); + alloc_len = length; + } + } + + /* Set up main header fields in mailbox command */ + sli4_config->header.cfg_mhdr.payload_length = alloc_len; + bf_set(lpfc_mbox_hdr_sge_cnt, &sli4_config->header.cfg_mhdr, pagen); + + /* Set up sub-header fields into the first page */ + if (pagen > 0) { + bf_set(lpfc_mbox_hdr_opcode, &cfg_shdr->request, opcode); + bf_set(lpfc_mbox_hdr_subsystem, &cfg_shdr->request, subsystem); + cfg_shdr->request.request_length = + alloc_len - sizeof(union lpfc_sli4_cfg_shdr); + } + /* The sub-header is in DMA memory, which needs endian converstion */ + lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr, + sizeof(union lpfc_sli4_cfg_shdr)); + + return alloc_len; +} + +/** + * lpfc_sli4_mbox_opcode_get - Get the opcode from a sli4 mailbox command + * @phba: pointer to lpfc hba data structure. + * @mbox: pointer to lpfc mbox command. + * + * This routine gets the opcode from a SLI4 specific mailbox command for + * sending IOCTL command. If the mailbox command is not MBX_SLI4_CONFIG + * (0x9B) or if the IOCTL sub-header is not present, opcode 0x0 shall be + * returned. + **/ +uint8_t +lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox) +{ + struct lpfc_mbx_sli4_config *sli4_cfg; + union lpfc_sli4_cfg_shdr *cfg_shdr; + + if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG) + return 0; + sli4_cfg = &mbox->u.mqe.un.sli4_config; + + /* For embedded mbox command, get opcode from embedded sub-header*/ + if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) { + cfg_shdr = &mbox->u.mqe.un.sli4_config.header.cfg_shdr; + return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request); + } + + /* For non-embedded mbox command, get opcode from first dma page */ + if (unlikely(!mbox->sge_array)) + return 0; + cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0]; + return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request); +} + +/** + * lpfc_request_features: Configure SLI4 REQUEST_FEATURES mailbox + * @mboxq: pointer to lpfc mbox command. + * + * This routine sets up the mailbox for an SLI4 REQUEST_FEATURES + * mailbox command. + **/ +void +lpfc_request_features(struct lpfc_hba *phba, struct lpfcMboxq *mboxq) +{ + /* Set up SLI4 mailbox command header fields */ + memset(mboxq, 0, sizeof(LPFC_MBOXQ_t)); + bf_set(lpfc_mqe_command, &mboxq->u.mqe, MBX_SLI4_REQ_FTRS); + + /* Set up host requested features. */ + bf_set(lpfc_mbx_rq_ftr_rq_fcpi, &mboxq->u.mqe.un.req_ftrs, 1); + + /* Virtual fabrics and FIPs are not supported yet. */ + bf_set(lpfc_mbx_rq_ftr_rq_ifip, &mboxq->u.mqe.un.req_ftrs, 0); + + /* Enable DIF (block guard) only if configured to do so. */ + if (phba->cfg_enable_bg) + bf_set(lpfc_mbx_rq_ftr_rq_dif, &mboxq->u.mqe.un.req_ftrs, 1); + + /* Enable NPIV only if configured to do so. */ + if (phba->max_vpi && phba->cfg_enable_npiv) + bf_set(lpfc_mbx_rq_ftr_rq_npiv, &mboxq->u.mqe.un.req_ftrs, 1); + + return; +} + +/** + * lpfc_init_vfi - Initialize the INIT_VFI mailbox command + * @mbox: pointer to lpfc mbox command to initialize. + * @vport: Vport associated with the VF. + * + * This routine initializes @mbox to all zeros and then fills in the mailbox + * fields from @vport. INIT_VFI configures virtual fabrics identified by VFI + * in the context of an FCF. The driver issues this command to setup a VFI + * before issuing a FLOGI to login to the VSAN. The driver should also issue a + * REG_VFI after a successful VSAN login. + **/ +void +lpfc_init_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport) +{ + struct lpfc_mbx_init_vfi *init_vfi; + + memset(mbox, 0, sizeof(*mbox)); + init_vfi = &mbox->u.mqe.un.init_vfi; + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VFI); + bf_set(lpfc_init_vfi_vr, init_vfi, 1); + bf_set(lpfc_init_vfi_vt, init_vfi, 1); + bf_set(lpfc_init_vfi_vfi, init_vfi, vport->vfi + vport->phba->vfi_base); + bf_set(lpfc_init_vfi_fcfi, init_vfi, vport->phba->fcf.fcfi); +} + +/** + * lpfc_reg_vfi - Initialize the REG_VFI mailbox command + * @mbox: pointer to lpfc mbox command to initialize. + * @vport: vport associated with the VF. + * @phys: BDE DMA bus address used to send the service parameters to the HBA. + * + * This routine initializes @mbox to all zeros and then fills in the mailbox + * fields from @vport, and uses @buf as a DMAable buffer to send the vport's + * fc service parameters to the HBA for this VFI. REG_VFI configures virtual + * fabrics identified by VFI in the context of an FCF. + **/ +void +lpfc_reg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport, dma_addr_t phys) +{ + struct lpfc_mbx_reg_vfi *reg_vfi; + + memset(mbox, 0, sizeof(*mbox)); + reg_vfi = &mbox->u.mqe.un.reg_vfi; + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_VFI); + bf_set(lpfc_reg_vfi_vp, reg_vfi, 1); + bf_set(lpfc_reg_vfi_vfi, reg_vfi, vport->vfi + vport->phba->vfi_base); + bf_set(lpfc_reg_vfi_fcfi, reg_vfi, vport->phba->fcf.fcfi); + bf_set(lpfc_reg_vfi_vpi, reg_vfi, vport->vpi + vport->phba->vpi_base); + reg_vfi->bde.addrHigh = putPaddrHigh(phys); + reg_vfi->bde.addrLow = putPaddrLow(phys); + reg_vfi->bde.tus.f.bdeSize = sizeof(vport->fc_sparam); + reg_vfi->bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64; + bf_set(lpfc_reg_vfi_nport_id, reg_vfi, vport->fc_myDID); +} + +/** + * lpfc_init_vpi - Initialize the INIT_VPI mailbox command + * @mbox: pointer to lpfc mbox command to initialize. + * @vpi: VPI to be initialized. + * + * The INIT_VPI mailbox command supports virtual N_Ports. The driver uses the + * command to activate a virtual N_Port. The HBA assigns a MAC address to use + * with the virtual N Port. The SLI Host issues this command before issuing a + * FDISC to connect to the Fabric. The SLI Host should issue a REG_VPI after a + * successful virtual NPort login. + **/ +void +lpfc_init_vpi(struct lpfcMboxq *mbox, uint16_t vpi) +{ + memset(mbox, 0, sizeof(*mbox)); + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VPI); + bf_set(lpfc_init_vpi_vpi, &mbox->u.mqe.un.init_vpi, vpi); +} + +/** + * lpfc_unreg_vfi - Initialize the UNREG_VFI mailbox command + * @mbox: pointer to lpfc mbox command to initialize. + * @vfi: VFI to be unregistered. + * + * The UNREG_VFI mailbox command causes the SLI Host to put a virtual fabric + * (logical NPort) into the inactive state. The SLI Host must have logged out + * and unregistered all remote N_Ports to abort any activity on the virtual + * fabric. The SLI Port posts the mailbox response after marking the virtual + * fabric inactive. + **/ +void +lpfc_unreg_vfi(struct lpfcMboxq *mbox, uint16_t vfi) +{ + memset(mbox, 0, sizeof(*mbox)); + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_VFI); + bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi, vfi); +} + +/** + * lpfc_dump_fcoe_param - Dump config region 23 to get FCoe parameters. + * @phba: pointer to the hba structure containing. + * @mbox: pointer to lpfc mbox command to initialize. + * + * This function create a SLI4 dump mailbox command to dump FCoE + * parameters stored in region 23. + **/ +int +lpfc_dump_fcoe_param(struct lpfc_hba *phba, + struct lpfcMboxq *mbox) +{ + struct lpfc_dmabuf *mp = NULL; + MAILBOX_t *mb; + + memset(mbox, 0, sizeof(*mbox)); + mb = &mbox->u.mb; + + mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); + if (mp) + mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys); + + if (!mp || !mp->virt) { + kfree(mp); + /* dump_fcoe_param failed to allocate memory */ + lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, + "2569 lpfc_dump_fcoe_param: memory" + " allocation failed \n"); + return 1; + } + + memset(mp->virt, 0, LPFC_BPL_SIZE); + INIT_LIST_HEAD(&mp->list); + + /* save address for completion */ + mbox->context1 = (uint8_t *) mp; + + mb->mbxCommand = MBX_DUMP_MEMORY; + mb->un.varDmp.type = DMP_NV_PARAMS; + mb->un.varDmp.region_id = DMP_REGION_FCOEPARAM; + mb->un.varDmp.sli4_length = DMP_FCOEPARAM_RGN_SIZE; + mb->un.varWords[3] = putPaddrLow(mp->phys); + mb->un.varWords[4] = putPaddrHigh(mp->phys); + return 0; +} + +/** + * lpfc_reg_fcfi - Initialize the REG_FCFI mailbox command + * @phba: pointer to the hba structure containing the FCF index and RQ ID. + * @mbox: pointer to lpfc mbox command to initialize. + * + * The REG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs). The + * SLI Host uses the command to activate an FCF after it has acquired FCF + * information via a READ_FCF mailbox command. This mailbox command also is used + * to indicate where received unsolicited frames from this FCF will be sent. By + * default this routine will set up the FCF to forward all unsolicited frames + * the the RQ ID passed in the @phba. This can be overridden by the caller for + * more complicated setups. + **/ +void +lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox) +{ + struct lpfc_mbx_reg_fcfi *reg_fcfi; + + memset(mbox, 0, sizeof(*mbox)); + reg_fcfi = &mbox->u.mqe.un.reg_fcfi; + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_FCFI); + bf_set(lpfc_reg_fcfi_rq_id0, reg_fcfi, phba->sli4_hba.hdr_rq->queue_id); + bf_set(lpfc_reg_fcfi_rq_id1, reg_fcfi, REG_FCF_INVALID_QID); + bf_set(lpfc_reg_fcfi_rq_id2, reg_fcfi, REG_FCF_INVALID_QID); + bf_set(lpfc_reg_fcfi_rq_id3, reg_fcfi, REG_FCF_INVALID_QID); + bf_set(lpfc_reg_fcfi_info_index, reg_fcfi, phba->fcf.fcf_indx); + /* reg_fcf addr mode is bit wise inverted value of fcf addr_mode */ + bf_set(lpfc_reg_fcfi_mam, reg_fcfi, + (~phba->fcf.addr_mode) & 0x3); + if (phba->fcf.fcf_flag & FCF_VALID_VLAN) { + bf_set(lpfc_reg_fcfi_vv, reg_fcfi, 1); + bf_set(lpfc_reg_fcfi_vlan_tag, reg_fcfi, phba->fcf.vlan_id); + } +} + +/** + * lpfc_unreg_fcfi - Initialize the UNREG_FCFI mailbox command + * @mbox: pointer to lpfc mbox command to initialize. + * @fcfi: FCFI to be unregistered. + * + * The UNREG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs). + * The SLI Host uses the command to inactivate an FCFI. + **/ +void +lpfc_unreg_fcfi(struct lpfcMboxq *mbox, uint16_t fcfi) +{ + memset(mbox, 0, sizeof(*mbox)); + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_FCFI); + bf_set(lpfc_unreg_fcfi, &mbox->u.mqe.un.unreg_fcfi, fcfi); +} + +/** + * lpfc_resume_rpi - Initialize the RESUME_RPI mailbox command + * @mbox: pointer to lpfc mbox command to initialize. + * @ndlp: The nodelist structure that describes the RPI to resume. + * + * The RESUME_RPI mailbox command is used to restart I/O to an RPI after a + * link event. + **/ +void +lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp) +{ + struct lpfc_mbx_resume_rpi *resume_rpi; + + memset(mbox, 0, sizeof(*mbox)); + resume_rpi = &mbox->u.mqe.un.resume_rpi; + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_RESUME_RPI); + bf_set(lpfc_resume_rpi_rpi, resume_rpi, ndlp->nlp_rpi); + bf_set(lpfc_resume_rpi_vpi, resume_rpi, + ndlp->vport->vpi + ndlp->vport->phba->vpi_base); + bf_set(lpfc_resume_rpi_vfi, resume_rpi, + ndlp->vport->vfi + ndlp->vport->phba->vfi_base); +} diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 6ba5a72..6efe459 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -1192,7 +1192,7 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_vport *vport, /* cleanup any ndlp on mbox q waiting for reglogin cmpl */ if ((mb = phba->sli.mbox_active)) { - if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) && + if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) && (ndlp == (struct lpfc_nodelist *) mb->context2)) { lpfc_nlp_put(ndlp); mb->context2 = NULL; @@ -1202,7 +1202,7 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_vport *vport, spin_lock_irq(&phba->hbalock); list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) { - if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) && + if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) && (ndlp == (struct lpfc_nodelist *) mb->context2)) { mp = (struct lpfc_dmabuf *) (mb->context1); if (mp) { @@ -1253,7 +1253,7 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport, { struct Scsi_Host *shost = lpfc_shost_from_vport(vport); LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg; - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; uint32_t did = mb->un.varWords[1]; if (mb->mbxStatus) { @@ -1880,11 +1880,12 @@ lpfc_cmpl_reglogin_npr_node(struct lpfc_vport *vport, void *arg, uint32_t evt) { LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg; - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; - if (!mb->mbxStatus) + if (!mb->mbxStatus) { ndlp->nlp_rpi = mb->un.varWords[0]; - else { + ndlp->nlp_flag |= NLP_RPI_VALID; + } else { if (ndlp->nlp_flag & NLP_NODEV_REMOVE) { lpfc_drop_node(vport, ndlp); return NLP_STE_FREED_NODE; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index cf42ada..b53af99 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -43,24 +43,7 @@ #include "lpfc_logmsg.h" #include "lpfc_compat.h" #include "lpfc_debugfs.h" - -/* - * Define macro to log: Mailbox command x%x cannot issue Data - * This allows multiple uses of lpfc_msgBlk0311 - * w/o perturbing log msg utility. - */ -#define LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag) \ - lpfc_printf_log(phba, \ - KERN_INFO, \ - LOG_MBOX | LOG_SLI, \ - "(%d):0311 Mailbox command x%x cannot " \ - "issue Data: x%x x%x x%x\n", \ - pmbox->vport ? pmbox->vport->vpi : 0, \ - pmbox->mb.mbxCommand, \ - phba->pport->port_state, \ - psli->sli_flag, \ - flag) - +#include "lpfc_vport.h" /* There are only four IOCB completion types. */ typedef enum _lpfc_iocb_type { @@ -843,7 +826,7 @@ lpfc_sli_ring_map(struct lpfc_hba *phba) pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmb) return -ENOMEM; - pmbox = &pmb->mb; + pmbox = &pmb->u.mb; phba->link_state = LPFC_INIT_MBX_CMDS; for (i = 0; i < psli->num_rings; i++) { lpfc_config_ring(phba, i, pmb); @@ -1652,6 +1635,15 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) case MBX_HEARTBEAT: case MBX_PORT_CAPABILITIES: case MBX_PORT_IOV_CONTROL: + case MBX_SLI4_CONFIG: + case MBX_SLI4_REQ_FTRS: + case MBX_REG_FCFI: + case MBX_UNREG_FCFI: + case MBX_REG_VFI: + case MBX_UNREG_VFI: + case MBX_INIT_VPI: + case MBX_INIT_VFI: + case MBX_RESUME_RPI: ret = mbxCommand; break; default: @@ -1672,7 +1664,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) * will wake up thread waiting on the wait queue pointed by context1 * of the mailbox. **/ -static void +void lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) { wait_queue_head_t *pdone_q; @@ -1706,7 +1698,7 @@ void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { struct lpfc_dmabuf *mp; - uint16_t rpi; + uint16_t rpi, vpi; int rc; mp = (struct lpfc_dmabuf *) (pmb->context1); @@ -1716,24 +1708,30 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) kfree(mp); } + if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) && + (phba->sli_rev == LPFC_SLI_REV4)) + lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi); + /* * If a REG_LOGIN succeeded after node is destroyed or node * is in re-discovery driver need to cleanup the RPI. */ if (!(phba->pport->load_flag & FC_UNLOADING) && - pmb->mb.mbxCommand == MBX_REG_LOGIN64 && - !pmb->mb.mbxStatus) { - - rpi = pmb->mb.un.varWords[0]; - lpfc_unreg_login(phba, pmb->mb.un.varRegLogin.vpi, rpi, pmb); + pmb->u.mb.mbxCommand == MBX_REG_LOGIN64 && + !pmb->u.mb.mbxStatus) { + rpi = pmb->u.mb.un.varWords[0]; + vpi = pmb->u.mb.un.varRegLogin.vpi - phba->vpi_base; + lpfc_unreg_login(phba, vpi, rpi, pmb); pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); if (rc != MBX_NOT_FINISHED) return; } - mempool_free(pmb, phba->mbox_mem_pool); - return; + if (bf_get(lpfc_mqe_command, &pmb->u.mqe) == MBX_SLI4_CONFIG) + lpfc_sli4_mbox_cmd_free(phba, pmb); + else + mempool_free(pmb, phba->mbox_mem_pool); } /** @@ -1770,7 +1768,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba) if (pmb == NULL) break; - pmbox = &pmb->mb; + pmbox = &pmb->u.mb; if (pmbox->mbxCommand != MBX_HEARTBEAT) { if (pmb->vport) { @@ -1799,9 +1797,10 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba) /* Unknow mailbox command compl */ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "(%d):0323 Unknown Mailbox command " - "%x Cmpl\n", + "x%x (x%x) Cmpl\n", pmb->vport ? pmb->vport->vpi : 0, - pmbox->mbxCommand); + pmbox->mbxCommand, + lpfc_sli4_mbox_opcode_get(phba, pmb)); phba->link_state = LPFC_HBA_ERROR; phba->work_hs = HS_FFER3; lpfc_handle_eratt(phba); @@ -1816,29 +1815,29 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba) LOG_MBOX | LOG_SLI, "(%d):0305 Mbox cmd cmpl " "error - RETRYing Data: x%x " - "x%x x%x x%x\n", + "(x%x) x%x x%x x%x\n", pmb->vport ? pmb->vport->vpi :0, pmbox->mbxCommand, + lpfc_sli4_mbox_opcode_get(phba, + pmb), pmbox->mbxStatus, pmbox->un.varWords[0], pmb->vport->port_state); pmbox->mbxStatus = 0; pmbox->mbxOwner = OWN_HOST; - spin_lock_irq(&phba->hbalock); - phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; - spin_unlock_irq(&phba->hbalock); rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); - if (rc == MBX_SUCCESS) + if (rc != MBX_NOT_FINISHED) continue; } } /* Mailbox cmd <cmd> Cmpl <cmpl> */ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI, - "(%d):0307 Mailbox cmd x%x Cmpl x%p " + "(%d):0307 Mailbox cmd x%x (x%x) Cmpl x%p " "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n", pmb->vport ? pmb->vport->vpi : 0, pmbox->mbxCommand, + lpfc_sli4_mbox_opcode_get(phba, pmb), pmb->mbox_cmpl, *((uint32_t *) pmbox), pmbox->un.varWords[0], @@ -3377,10 +3376,10 @@ lpfc_sli_brdkill(struct lpfc_hba *phba) } spin_lock_irq(&phba->hbalock); psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; + psli->mbox_active = NULL; phba->link_flag &= ~LS_IGNORE_ERATT; spin_unlock_irq(&phba->hbalock); - psli->mbox_active = NULL; lpfc_hba_down_post(phba); phba->link_state = LPFC_HBA_ERROR; @@ -3790,7 +3789,7 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba) if (!pmb) return -ENOMEM; - pmbox = &pmb->mb; + pmbox = &pmb->u.mb; /* Initialize the struct lpfc_sli_hbq structure for each hbq */ phba->link_state = LPFC_INIT_MBX_CMDS; @@ -3917,33 +3916,43 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode) lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0442 Adapter failed to init, mbxCmd x%x " "CONFIG_PORT, mbxStatus x%x Data: x%x\n", - pmb->mb.mbxCommand, pmb->mb.mbxStatus, 0); + pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus, 0); spin_lock_irq(&phba->hbalock); - phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE; + phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE; spin_unlock_irq(&phba->hbalock); rc = -ENXIO; - } else + } else { + /* Allow asynchronous mailbox command to go through */ + spin_lock_irq(&phba->hbalock); + phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK; + spin_unlock_irq(&phba->hbalock); done = 1; + } } if (!done) { rc = -EINVAL; goto do_prep_failed; } - if (pmb->mb.un.varCfgPort.sli_mode == 3) { - if (!pmb->mb.un.varCfgPort.cMA) { + if (pmb->u.mb.un.varCfgPort.sli_mode == 3) { + if (!pmb->u.mb.un.varCfgPort.cMA) { rc = -ENXIO; goto do_prep_failed; } - if (phba->max_vpi && pmb->mb.un.varCfgPort.gmv) { + if (phba->max_vpi && pmb->u.mb.un.varCfgPort.gmv) { phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED; - phba->max_vpi = pmb->mb.un.varCfgPort.max_vpi; + phba->max_vpi = pmb->u.mb.un.varCfgPort.max_vpi; + phba->max_vports = (phba->max_vpi > phba->max_vports) ? + phba->max_vpi : phba->max_vports; + } else phba->max_vpi = 0; - if (pmb->mb.un.varCfgPort.gerbm) + if (pmb->u.mb.un.varCfgPort.gdss) + phba->sli3_options |= LPFC_SLI3_DSS_ENABLED; + if (pmb->u.mb.un.varCfgPort.gerbm) phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED; - if (pmb->mb.un.varCfgPort.gcrp) + if (pmb->u.mb.un.varCfgPort.gcrp) phba->sli3_options |= LPFC_SLI3_CRP_ENABLED; - if (pmb->mb.un.varCfgPort.ginb) { + if (pmb->u.mb.un.varCfgPort.ginb) { phba->sli3_options |= LPFC_SLI3_INB_ENABLED; phba->hbq_get = phba->mbox->us.s3_inb_pgp.hbq_get; phba->port_gp = phba->mbox->us.s3_inb_pgp.port; @@ -3959,7 +3968,7 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode) } if (phba->cfg_enable_bg) { - if (pmb->mb.un.varCfgPort.gbg) + if (pmb->u.mb.un.varCfgPort.gbg) phba->sli3_options |= LPFC_SLI3_BG_ENABLED; else lpfc_printf_log(phba, KERN_ERR, LOG_INIT, @@ -4054,8 +4063,9 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba) if (rc) goto lpfc_sli_hba_setup_error; } - + spin_lock_irq(&phba->hbalock); phba->sli.sli_flag |= LPFC_PROCESS_LA; + spin_unlock_irq(&phba->hbalock); rc = lpfc_config_port_post(phba); if (rc) @@ -4596,7 +4606,7 @@ void lpfc_mbox_timeout_handler(struct lpfc_hba *phba) { LPFC_MBOXQ_t *pmbox = phba->sli.mbox_active; - MAILBOX_t *mb = &pmbox->mb; + MAILBOX_t *mb = &pmbox->u.mb; struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; @@ -6414,6 +6424,52 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba) } /** + * lpfc_sli_mbox_sys_flush - Flush mailbox command sub-system + * @phba: Pointer to HBA context object. + * + * This routine flushes the mailbox command subsystem. It will unconditionally + * flush all the mailbox commands in the three possible stages in the mailbox + * command sub-system: pending mailbox command queue; the outstanding mailbox + * command; and completed mailbox command queue. It is caller's responsibility + * to make sure that the driver is in the proper state to flush the mailbox + * command sub-system. Namely, the posting of mailbox commands into the + * pending mailbox command queue from the various clients must be stopped; + * either the HBA is in a state that it will never works on the outstanding + * mailbox command (such as in EEH or ERATT conditions) or the outstanding + * mailbox command has been completed. + **/ +static void +lpfc_sli_mbox_sys_flush(struct lpfc_hba *phba) +{ + LIST_HEAD(completions); + struct lpfc_sli *psli = &phba->sli; + LPFC_MBOXQ_t *pmb; + unsigned long iflag; + + /* Flush all the mailbox commands in the mbox system */ + spin_lock_irqsave(&phba->hbalock, iflag); + /* The pending mailbox command queue */ + list_splice_init(&phba->sli.mboxq, &completions); + /* The outstanding active mailbox command */ + if (psli->mbox_active) { + list_add_tail(&psli->mbox_active->list, &completions); + psli->mbox_active = NULL; + psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; + } + /* The completed mailbox command queue */ + list_splice_init(&phba->sli.mboxq_cmpl, &completions); + spin_unlock_irqrestore(&phba->hbalock, iflag); + + /* Return all flushed mailbox commands with MBX_NOT_FINISHED status */ + while (!list_empty(&completions)) { + list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list); + pmb->u.mb.mbxStatus = MBX_NOT_FINISHED; + if (pmb->mbox_cmpl) + pmb->mbox_cmpl(phba, pmb); + } +} + +/** * lpfc_sli_host_down - Vport cleanup function * @vport: Pointer to virtual port object. * @@ -6506,9 +6562,11 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; struct lpfc_dmabuf *buf_ptr; - LPFC_MBOXQ_t *pmb; - int i; unsigned long flags = 0; + int i; + + /* Shutdown the mailbox command sub-system */ + lpfc_sli_mbox_sys_shutdown(phba); lpfc_hba_down_prep(phba); @@ -7773,7 +7831,7 @@ lpfc_sli_sp_intr_handler(int irq, void *dev_id) if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) { pmb = phba->sli.mbox_active; - pmbox = &pmb->mb; + pmbox = &pmb->u.mb; mbox = phba->mbox; vport = pmb->vport; @@ -8170,6 +8228,183 @@ lpfc_sli4_iocb_param_transfer(struct lpfc_iocbq *pIocbIn, } /** + * lpfc_sli4_sp_handle_async_event - Handle an asynchroous event + * @phba: Pointer to HBA context object. + * @cqe: Pointer to mailbox completion queue entry. + * + * This routine process a mailbox completion queue entry with asynchrous + * event. + * + * Return: true if work posted to worker thread, otherwise false. + **/ +static bool +lpfc_sli4_sp_handle_async_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe) +{ + struct lpfc_cq_event *cq_event; + unsigned long iflags; + + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "0392 Async Event: word0:x%x, word1:x%x, " + "word2:x%x, word3:x%x\n", mcqe->word0, + mcqe->mcqe_tag0, mcqe->mcqe_tag1, mcqe->trailer); + + /* Allocate a new internal CQ_EVENT entry */ + cq_event = lpfc_sli4_cq_event_alloc(phba); + if (!cq_event) { + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "0394 Failed to allocate CQ_EVENT entry\n"); + return false; + } + + /* Move the CQE into an asynchronous event entry */ + memcpy(&cq_event->cqe, mcqe, sizeof(struct lpfc_mcqe)); + spin_lock_irqsave(&phba->hbalock, iflags); + list_add_tail(&cq_event->list, &phba->sli4_hba.sp_asynce_work_queue); + /* Set the async event flag */ + phba->hba_flag |= ASYNC_EVENT; + spin_unlock_irqrestore(&phba->hbalock, iflags); + + return true; +} + +/** + * lpfc_sli4_sp_handle_mbox_event - Handle a mailbox completion event + * @phba: Pointer to HBA context object. + * @cqe: Pointer to mailbox completion queue entry. + * + * This routine process a mailbox completion queue entry with mailbox + * completion event. + * + * Return: true if work posted to worker thread, otherwise false. + **/ +static bool +lpfc_sli4_sp_handle_mbox_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe) +{ + uint32_t mcqe_status; + MAILBOX_t *mbox, *pmbox; + struct lpfc_mqe *mqe; + struct lpfc_vport *vport; + struct lpfc_nodelist *ndlp; + struct lpfc_dmabuf *mp; + unsigned long iflags; + LPFC_MBOXQ_t *pmb; + bool workposted = false; + int rc; + + /* If not a mailbox complete MCQE, out by checking mailbox consume */ + if (!bf_get(lpfc_trailer_completed, mcqe)) + goto out_no_mqe_complete; + + /* Get the reference to the active mbox command */ + spin_lock_irqsave(&phba->hbalock, iflags); + pmb = phba->sli.mbox_active; + if (unlikely(!pmb)) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, + "1832 No pending MBOX command to handle\n"); + spin_unlock_irqrestore(&phba->hbalock, iflags); + goto out_no_mqe_complete; + } + spin_unlock_irqrestore(&phba->hbalock, iflags); + mqe = &pmb->u.mqe; + pmbox = (MAILBOX_t *)&pmb->u.mqe; + mbox = phba->mbox; + vport = pmb->vport; + + /* Reset heartbeat timer */ + phba->last_completion_time = jiffies; + del_timer(&phba->sli.mbox_tmo); + + /* Move mbox data to caller's mailbox region, do endian swapping */ + if (pmb->mbox_cmpl && mbox) + lpfc_sli_pcimem_bcopy(mbox, mqe, sizeof(struct lpfc_mqe)); + /* Set the mailbox status with SLI4 range 0x4000 */ + mcqe_status = bf_get(lpfc_mcqe_status, mcqe); + if (mcqe_status != MB_CQE_STATUS_SUCCESS) + bf_set(lpfc_mqe_status, mqe, + (LPFC_MBX_ERROR_RANGE | mcqe_status)); + + if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) { + pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG; + lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_MBOX_VPORT, + "MBOX dflt rpi: status:x%x rpi:x%x", + mcqe_status, + pmbox->un.varWords[0], 0); + if (mcqe_status == MB_CQE_STATUS_SUCCESS) { + mp = (struct lpfc_dmabuf *)(pmb->context1); + ndlp = (struct lpfc_nodelist *)pmb->context2; + /* Reg_LOGIN of dflt RPI was successful. Now lets get + * RID of the PPI using the same mbox buffer. + */ + lpfc_unreg_login(phba, vport->vpi, + pmbox->un.varWords[0], pmb); + pmb->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi; + pmb->context1 = mp; + pmb->context2 = ndlp; + pmb->vport = vport; + rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); + if (rc != MBX_BUSY) + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | + LOG_SLI, "0385 rc should " + "have been MBX_BUSY\n"); + if (rc != MBX_NOT_FINISHED) + goto send_current_mbox; + } + } + spin_lock_irqsave(&phba->pport->work_port_lock, iflags); + phba->pport->work_port_events &= ~WORKER_MBOX_TMO; + spin_unlock_irqrestore(&phba->pport->work_port_lock, iflags); + + /* There is mailbox completion work to do */ + spin_lock_irqsave(&phba->hbalock, iflags); + __lpfc_mbox_cmpl_put(phba, pmb); + phba->work_ha |= HA_MBATT; + spin_unlock_irqrestore(&phba->hbalock, iflags); + workposted = true; + +send_current_mbox: + spin_lock_irqsave(&phba->hbalock, iflags); + /* Release the mailbox command posting token */ + phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; + /* Setting active mailbox pointer need to be in sync to flag clear */ + phba->sli.mbox_active = NULL; + spin_unlock_irqrestore(&phba->hbalock, iflags); + /* Wake up worker thread to post the next pending mailbox command */ + lpfc_worker_wake_up(phba); +out_no_mqe_complete: + if (bf_get(lpfc_trailer_consumed, mcqe)) + lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq); + return workposted; +} + +/** + * lpfc_sli4_sp_handle_mcqe - Process a mailbox completion queue entry + * @phba: Pointer to HBA context object. + * @cqe: Pointer to mailbox completion queue entry. + * + * This routine process a mailbox completion queue entry, it invokes the + * proper mailbox complete handling or asynchrous event handling routine + * according to the MCQE's async bit. + * + * Return: true if work posted to worker thread, otherwise false. + **/ +static bool +lpfc_sli4_sp_handle_mcqe(struct lpfc_hba *phba, struct lpfc_cqe *cqe) +{ + struct lpfc_mcqe mcqe; + bool workposted; + + /* Copy the mailbox MCQE and convert endian order as needed */ + lpfc_sli_pcimem_bcopy(cqe, &mcqe, sizeof(struct lpfc_mcqe)); + + /* Invoke the proper event handling routine */ + if (!bf_get(lpfc_trailer_async, &mcqe)) + workposted = lpfc_sli4_sp_handle_mbox_event(phba, &mcqe); + else + workposted = lpfc_sli4_sp_handle_async_event(phba, &mcqe); + return workposted; +} + +/** * lpfc_sli4_sp_handle_els_wcqe - Handle els work-queue completion event * @phba: Pointer to HBA context object. * @wcqe: Pointer to work-queue completion queue entry. @@ -9247,6 +9482,112 @@ out: } /** + * lpfc_mq_create - Create a mailbox Queue on the HBA + * @phba: HBA structure that indicates port to create a queue on. + * @mq: The queue structure to use to create the mailbox queue. + * + * This function creates a mailbox queue, as detailed in @mq, on a port, + * described by @phba by sending a MQ_CREATE mailbox command to the HBA. + * + * The @phba struct is used to send mailbox command to HBA. The @cq struct + * is used to get the entry count and entry size that are necessary to + * determine the number of pages to allocate and use for this queue. This + * function will send the MQ_CREATE mailbox command to the HBA to setup the + * mailbox queue. This function is asynchronous and will wait for the mailbox + * command to finish before continuing. + * + * On success this function will return a zero. If unable to allocate enough + * memory this function will return ENOMEM. If the queue create mailbox command + * fails this function will return ENXIO. + **/ +uint32_t +lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq, + struct lpfc_queue *cq, uint32_t subtype) +{ + struct lpfc_mbx_mq_create *mq_create; + struct lpfc_dmabuf *dmabuf; + LPFC_MBOXQ_t *mbox; + int rc, length, status = 0; + uint32_t shdr_status, shdr_add_status; + union lpfc_sli4_cfg_shdr *shdr; + + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + length = (sizeof(struct lpfc_mbx_mq_create) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_MQ_CREATE, + length, LPFC_SLI4_MBX_EMBED); + mq_create = &mbox->u.mqe.un.mq_create; + bf_set(lpfc_mbx_mq_create_num_pages, &mq_create->u.request, + mq->page_count); + bf_set(lpfc_mq_context_cq_id, &mq_create->u.request.context, + cq->queue_id); + bf_set(lpfc_mq_context_valid, &mq_create->u.request.context, 1); + switch (mq->entry_count) { + default: + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "0362 Unsupported MQ count. (%d)\n", + mq->entry_count); + if (mq->entry_count < 16) + return -EINVAL; + /* otherwise default to smallest count (drop through) */ + case 16: + bf_set(lpfc_mq_context_count, &mq_create->u.request.context, + LPFC_MQ_CNT_16); + break; + case 32: + bf_set(lpfc_mq_context_count, &mq_create->u.request.context, + LPFC_MQ_CNT_32); + break; + case 64: + bf_set(lpfc_mq_context_count, &mq_create->u.request.context, + LPFC_MQ_CNT_64); + break; + case 128: + bf_set(lpfc_mq_context_count, &mq_create->u.request.context, + LPFC_MQ_CNT_128); + break; + } + list_for_each_entry(dmabuf, &mq->page_list, list) { + mq_create->u.request.page[dmabuf->buffer_tag].addr_lo = + putPaddrLow(dmabuf->phys); + mq_create->u.request.page[dmabuf->buffer_tag].addr_hi = + putPaddrHigh(dmabuf->phys); + } + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + /* The IOCTL status is embedded in the mailbox subheader. */ + shdr = (union lpfc_sli4_cfg_shdr *) &mq_create->header.cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); + if (shdr_status || shdr_add_status || rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2502 MQ_CREATE mailbox failed with " + "status x%x add_status x%x, mbx status x%x\n", + shdr_status, shdr_add_status, rc); + status = -ENXIO; + goto out; + } + mq->queue_id = bf_get(lpfc_mbx_mq_create_q_id, &mq_create->u.response); + if (mq->queue_id == 0xFFFF) { + status = -ENXIO; + goto out; + } + mq->type = LPFC_MQ; + mq->subtype = subtype; + mq->host_index = 0; + mq->hba_index = 0; + + /* link the mq onto the parent cq child list */ + list_add_tail(&mq->list, &cq->child_list); +out: + if (rc != MBX_TIMEOUT) + mempool_free(mbox, phba->mbox_mem_pool); + return status; +} + +/** * lpfc_wq_create - Create a Work Queue on the HBA * @phba: HBA structure that indicates port to create a queue on. * @wq: The queue structure to use to create the work queue. @@ -9615,6 +9956,60 @@ lpfc_cq_destroy(struct lpfc_hba *phba, struct lpfc_queue *cq) } /** + * lpfc_mq_destroy - Destroy a Mailbox Queue on the HBA + * @qm: The queue structure associated with the queue to destroy. + * + * This function destroys a queue, as detailed in @mq by sending an mailbox + * command, specific to the type of queue, to the HBA. + * + * The @mq struct is used to get the queue ID of the queue to destroy. + * + * On success this function will return a zero. If the queue destroy mailbox + * command fails this function will return ENXIO. + **/ +uint32_t +lpfc_mq_destroy(struct lpfc_hba *phba, struct lpfc_queue *mq) +{ + LPFC_MBOXQ_t *mbox; + int rc, length, status = 0; + uint32_t shdr_status, shdr_add_status; + union lpfc_sli4_cfg_shdr *shdr; + + if (!mq) + return -ENODEV; + mbox = mempool_alloc(mq->phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + length = (sizeof(struct lpfc_mbx_mq_destroy) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_MQ_DESTROY, + length, LPFC_SLI4_MBX_EMBED); + bf_set(lpfc_mbx_mq_destroy_q_id, &mbox->u.mqe.un.mq_destroy.u.request, + mq->queue_id); + mbox->vport = mq->phba->pport; + mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + rc = lpfc_sli_issue_mbox(mq->phba, mbox, MBX_POLL); + /* The IOCTL status is embedded in the mailbox subheader. */ + shdr = (union lpfc_sli4_cfg_shdr *) + &mbox->u.mqe.un.mq_destroy.header.cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); + if (shdr_status || shdr_add_status || rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2507 MQ_DESTROY mailbox failed with " + "status x%x add_status x%x, mbx status x%x\n", + shdr_status, shdr_add_status, rc); + status = -ENXIO; + } + /* Remove mq from any list */ + list_del_init(&mq->list); + if (rc != MBX_TIMEOUT) + mempool_free(mbox, mq->phba->mbox_mem_pool); + return status; +} + +/** * lpfc_wq_destroy - Destroy a Work Queue on the HBA * @wq: The queue structure associated with the queue to destroy. * |