diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/input/keyboard/Kconfig | 19 | ||||
-rw-r--r-- | drivers/input/keyboard/Makefile | 5 | ||||
-rw-r--r-- | drivers/input/keyboard/gpio_keys.c | 147 |
3 files changed, 166 insertions, 5 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 049f2f5..1b81a72 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -135,12 +135,12 @@ config KEYBOARD_STOWAWAY config KEYBOARD_CORGI tristate "Corgi keyboard" depends on PXA_SHARPSL - default y + default y help - Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx + Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx series of PDAs. - To compile this driver as a module, choose M here: the + To compile this driver as a module, choose M here: the module will be called corgikbd. config KEYBOARD_SPITZ @@ -214,4 +214,17 @@ config KEYBOARD_AAED2000 To compile this driver as a module, choose M here: the module will be called aaed2000_kbd. +config KEYBOARD_GPIO + tristate "Buttons on CPU GPIOs (PXA)" + depends on ARCH_PXA + help + This driver implements support for buttons connected + directly to GPIO pins of PXA CPUs. + + Say Y here if your device has buttons connected + directly to GPIO pins of the CPU. + + To compile this driver as a module, choose M here: the + module will be called gpio-keys. + endif diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 5687979..586a0fe 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o -obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o -obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o +obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o +obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o +obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c new file mode 100644 index 0000000..3a8f1b4 --- /dev/null +++ b/drivers/input/keyboard/gpio_keys.c @@ -0,0 +1,147 @@ +/* + * Driver for keys on GPIO lines capable of generating interrupts. + * + * Copyright 2005 Phil Blundell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/version.h> + +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/sched.h> +#include <linux/pm.h> +#include <linux/sysctl.h> +#include <linux/proc_fs.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/irq.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/arch/hardware.h> + +#include <asm/hardware/gpio_keys.h> + +static irqreturn_t gpio_keys_isr(int irq, void *dev_id) +{ + int i; + struct platform_device *pdev = dev_id; + struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; + struct input_dev *input = platform_get_drvdata(pdev); + + for (i = 0; i < pdata->nbuttons; i++) { + int gpio = pdata->buttons[i].gpio; + if (irq == IRQ_GPIO(gpio)) { + int state = ((GPLR(gpio) & GPIO_bit(gpio)) ? 1 : 0) ^ (pdata->buttons[i].active_low); + + input_report_key(input, pdata->buttons[i].keycode, state); + input_sync(input); + } + } + + return IRQ_HANDLED; +} + +static int __devinit gpio_keys_probe(struct platform_device *pdev) +{ + struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; + struct input_dev *input; + int i, error; + + input = input_allocate_device(); + if (!input) + return -ENOMEM; + + platform_set_drvdata(pdev, input); + + input->evbit[0] = BIT(EV_KEY); + + input->name = pdev->name; + input->phys = "gpio-keys/input0"; + input->cdev.dev = &pdev->dev; + input->private = pdata; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + for (i = 0; i < pdata->nbuttons; i++) { + int code = pdata->buttons[i].keycode; + int irq = IRQ_GPIO(pdata->buttons[i].gpio); + + set_irq_type(irq, IRQ_TYPE_EDGE_BOTH); + error = request_irq(irq, gpio_keys_isr, SA_SAMPLE_RANDOM, + pdata->buttons[i].desc ? pdata->buttons[i].desc : "gpio_keys", + pdev); + if (error) { + printk(KERN_ERR "gpio-keys: unable to claim irq %d; error %d\n", irq, ret); + goto fail; + } + set_bit(code, input->keybit); + } + + error = input_register_device(input); + if (error) { + printk(KERN_ERR "Unable to register gpio-keys input device\n"); + goto fail; + } + + return 0; + + fail: + for (i = i - 1; i >= 0; i--) + free_irq(IRQ_GPIO(pdata->buttons[i].gpio), pdev); + + input_free_device(input); + + return error; +} + +static int __devexit gpio_keys_remove(struct platform_device *pdev) +{ + struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; + struct input_dev *input = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < pdata->nbuttons; i++) { + int irq = IRQ_GPIO(pdata->buttons[i].gpio); + free_irq(irq, pdev); + } + + input_unregister_device(input); + + return 0; +} + +struct platform_driver gpio_keys_device_driver = { + .probe = gpio_keys_probe, + .remove = __devexit_p(gpio_keys_remove), + .driver = { + .name = "gpio-keys", + } +}; + +static int __init gpio_keys_init(void) +{ + return platform_driver_register(&gpio_keys_device_driver); +} + +static void __exit gpio_keys_exit(void) +{ + platform_driver_unregister(&gpio_keys_device_driver); +} + +module_init(gpio_keys_init); +module_exit(gpio_keys_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>"); +MODULE_DESCRIPTION("Keyboard driver for CPU GPIOs"); |