aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/pcmcia/au1000_generic.c10
-rw-r--r--drivers/pcmcia/au1000_generic.h6
-rw-r--r--drivers/pcmcia/db1xxx_ss.c25
-rw-r--r--drivers/pcmcia/xxs1500_ss.c27
4 files changed, 23 insertions, 45 deletions
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index 0208870..171c8a6 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -405,18 +405,16 @@ int au1x00_pcmcia_socket_probe(struct device *dev, struct pcmcia_low_level *ops,
skt->virt_io = (void *)
(ioremap((phys_t)AU1X_SOCK0_IO, 0x1000) -
(u32)mips_io_port_base);
- skt->phys_attr = AU1X_SOCK0_PSEUDO_PHYS_ATTR;
- skt->phys_mem = AU1X_SOCK0_PSEUDO_PHYS_MEM;
+ skt->phys_attr = AU1X_SOCK0_PHYS_ATTR;
+ skt->phys_mem = AU1X_SOCK0_PHYS_MEM;
}
-#ifndef CONFIG_MIPS_XXS1500
else {
skt->virt_io = (void *)
(ioremap((phys_t)AU1X_SOCK1_IO, 0x1000) -
(u32)mips_io_port_base);
- skt->phys_attr = AU1X_SOCK1_PSEUDO_PHYS_ATTR;
- skt->phys_mem = AU1X_SOCK1_PSEUDO_PHYS_MEM;
+ skt->phys_attr = AU1X_SOCK1_PHYS_ATTR;
+ skt->phys_mem = AU1X_SOCK1_PHYS_MEM;
}
-#endif
pcmcia_base_vaddrs[i] = (u32 *)skt->virt_io;
ret = ops->hw_init(skt);
diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h
index aa743f6..a324d32 100644
--- a/drivers/pcmcia/au1000_generic.h
+++ b/drivers/pcmcia/au1000_generic.h
@@ -36,10 +36,6 @@
#define AU1X_SOCK0_IO 0xF00000000ULL
#define AU1X_SOCK0_PHYS_ATTR 0xF40000000ULL
#define AU1X_SOCK0_PHYS_MEM 0xF80000000ULL
-/* pseudo 32 bit phys addresses, which get fixed up to the
- * real 36 bit address in fixup_bigphys_addr() */
-#define AU1X_SOCK0_PSEUDO_PHYS_ATTR 0xF4000000
-#define AU1X_SOCK0_PSEUDO_PHYS_MEM 0xF8000000
/* pcmcia socket 1 needs external glue logic so the memory map
* differs from board to board.
@@ -48,8 +44,6 @@
#define AU1X_SOCK1_IO 0xF08000000ULL
#define AU1X_SOCK1_PHYS_ATTR 0xF48000000ULL
#define AU1X_SOCK1_PHYS_MEM 0xF88000000ULL
-#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4800000
-#define AU1X_SOCK1_PSEUDO_PHYS_MEM 0xF8800000
#endif
struct pcmcia_state {
diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c
index b35b72b..3889cf0 100644
--- a/drivers/pcmcia/db1xxx_ss.c
+++ b/drivers/pcmcia/db1xxx_ss.c
@@ -43,9 +43,9 @@ struct db1x_pcmcia_sock {
void *virt_io;
/* the "pseudo" addresses of the PCMCIA space. */
- unsigned long phys_io;
- unsigned long phys_attr;
- unsigned long phys_mem;
+ phys_addr_t phys_io;
+ phys_addr_t phys_attr;
+ phys_addr_t phys_mem;
/* previous flags for set_socket() */
unsigned int old_flags;
@@ -404,7 +404,6 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
{
struct db1x_pcmcia_sock *sock;
struct resource *r;
- phys_t physio;
int ret, bid;
sock = kzalloc(sizeof(struct db1x_pcmcia_sock), GFP_KERNEL);
@@ -465,7 +464,7 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
* for this socket (usually the 36bit address shifted 4 to the
* right).
*/
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-attr");
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr");
if (!r) {
printk(KERN_ERR "pcmcia%d has no 'pseudo-attr' resource!\n",
sock->nr);
@@ -477,7 +476,7 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
* pseudo-mem: The 32bit address of the PCMCIA memory space for
* this socket (usually the 36bit address shifted 4 to the right)
*/
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-mem");
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem");
if (!r) {
printk(KERN_ERR "pcmcia%d has no 'pseudo-mem' resource!\n",
sock->nr);
@@ -489,7 +488,7 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
* pseudo-io: The 32bit address of the PCMCIA IO space for this
* socket (usually the 36bit address shifted 4 to the right).
*/
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-io");
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io");
if (!r) {
printk(KERN_ERR "pcmcia%d has no 'pseudo-io' resource!\n",
sock->nr);
@@ -497,12 +496,6 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
}
sock->phys_io = r->start;
-
- /* IO: we must remap the full 36bit address (for reference see
- * alchemy/common/setup.c::__fixup_bigphys_addr())
- */
- physio = ((phys_t)sock->phys_io) << 4;
-
/*
* PCMCIA client drivers use the inb/outb macros to access
* the IO registers. Since mips_io_port_base is added
@@ -511,7 +504,7 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
* to access the I/O or MEM address directly, without
* going through this "mips_io_port_base" mechanism.
*/
- sock->virt_io = (void *)(ioremap(physio, IO_MAP_SIZE) -
+ sock->virt_io = (void *)(ioremap(sock->phys_io, IO_MAP_SIZE) -
mips_io_port_base);
if (!sock->virt_io) {
@@ -547,8 +540,8 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
goto out2;
}
- printk(KERN_INFO "Alchemy Db/Pb1xxx pcmcia%d @ io/attr/mem %08lx"
- "(%p) %08lx %08lx card/insert/stschg/eject irqs @ %d "
+ printk(KERN_INFO "Alchemy Db/Pb1xxx pcmcia%d @ io/attr/mem %09llx"
+ "(%p) %09llx %09llx card/insert/stschg/eject irqs @ %d "
"%d %d %d\n", sock->nr, sock->phys_io, sock->virt_io,
sock->phys_attr, sock->phys_mem, sock->card_irq,
sock->insert_irq, sock->stschg_irq, sock->eject_irq);
diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c
index 4e36930..61560cd 100644
--- a/drivers/pcmcia/xxs1500_ss.c
+++ b/drivers/pcmcia/xxs1500_ss.c
@@ -56,10 +56,9 @@ struct xxs1500_pcmcia_sock {
struct pcmcia_socket socket;
void *virt_io;
- /* the "pseudo" addresses of the PCMCIA space. */
- unsigned long phys_io;
- unsigned long phys_attr;
- unsigned long phys_mem;
+ phys_addr_t phys_io;
+ phys_addr_t phys_attr;
+ phys_addr_t phys_mem;
/* previous flags for set_socket() */
unsigned int old_flags;
@@ -211,7 +210,6 @@ static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev)
{
struct xxs1500_pcmcia_sock *sock;
struct resource *r;
- phys_t physio;
int ret, irq;
sock = kzalloc(sizeof(struct xxs1500_pcmcia_sock), GFP_KERNEL);
@@ -225,9 +223,9 @@ static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev)
* for this socket (usually the 36bit address shifted 4 to the
* right).
*/
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-attr");
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr");
if (!r) {
- dev_err(&pdev->dev, "missing 'pseudo-attr' resource!\n");
+ dev_err(&pdev->dev, "missing 'pcmcia-attr' resource!\n");
goto out0;
}
sock->phys_attr = r->start;
@@ -236,9 +234,9 @@ static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev)
* pseudo-mem: The 32bit address of the PCMCIA memory space for
* this socket (usually the 36bit address shifted 4 to the right)
*/
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-mem");
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem");
if (!r) {
- dev_err(&pdev->dev, "missing 'pseudo-mem' resource!\n");
+ dev_err(&pdev->dev, "missing 'pcmcia-mem' resource!\n");
goto out0;
}
sock->phys_mem = r->start;
@@ -247,19 +245,14 @@ static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev)
* pseudo-io: The 32bit address of the PCMCIA IO space for this
* socket (usually the 36bit address shifted 4 to the right).
*/
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-io");
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io");
if (!r) {
- dev_err(&pdev->dev, "missing 'pseudo-io' resource!\n");
+ dev_err(&pdev->dev, "missing 'pcmcia-io' resource!\n");
goto out0;
}
sock->phys_io = r->start;
- /* for io must remap the full 36bit address (for reference see
- * alchemy/common/setup.c::__fixup_bigphys_addr)
- */
- physio = ((phys_t)sock->phys_io) << 4;
-
/*
* PCMCIA client drivers use the inb/outb macros to access
* the IO registers. Since mips_io_port_base is added
@@ -268,7 +261,7 @@ static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev)
* to access the I/O or MEM address directly, without
* going through this "mips_io_port_base" mechanism.
*/
- sock->virt_io = (void *)(ioremap(physio, IO_MAP_SIZE) -
+ sock->virt_io = (void *)(ioremap(sock->phys_io, IO_MAP_SIZE) -
mips_io_port_base);
if (!sock->virt_io) {
generated by cgit v1.1 at 2024-06-12 16:20:59 +0000