aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/igb/e1000_82575.c198
-rw-r--r--drivers/net/igb/e1000_82575.h2
-rw-r--r--drivers/net/igb/e1000_defines.h2
-rw-r--r--drivers/net/igb/igb_main.c2
4 files changed, 95 insertions, 109 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index 6158c0f..f8f5772 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -49,11 +49,10 @@ static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
static s32 igb_reset_hw_82575(struct e1000_hw *);
static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
static s32 igb_setup_copper_link_82575(struct e1000_hw *);
-static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *);
+static s32 igb_setup_serdes_link_82575(struct e1000_hw *);
static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16);
static void igb_clear_hw_cntrs_82575(struct e1000_hw *);
static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *, u16);
-static void igb_configure_pcs_link_82575(struct e1000_hw *);
static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *,
u16 *);
static s32 igb_get_phy_id_82575(struct e1000_hw *);
@@ -105,16 +104,20 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
dev_spec->sgmii_active = false;
ctrl_ext = rd32(E1000_CTRL_EXT);
- if ((ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) ==
- E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES) {
- hw->phy.media_type = e1000_media_type_internal_serdes;
- ctrl_ext |= E1000_CTRL_I2C_ENA;
- } else if (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII) {
+ switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
+ case E1000_CTRL_EXT_LINK_MODE_SGMII:
dev_spec->sgmii_active = true;
ctrl_ext |= E1000_CTRL_I2C_ENA;
- } else {
+ break;
+ case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
+ hw->phy.media_type = e1000_media_type_internal_serdes;
+ ctrl_ext |= E1000_CTRL_I2C_ENA;
+ break;
+ default:
ctrl_ext &= ~E1000_CTRL_I2C_ENA;
+ break;
}
+
wr32(E1000_CTRL_EXT, ctrl_ext);
/* Set mta register count */
@@ -134,7 +137,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
mac->ops.setup_physical_interface =
(hw->phy.media_type == e1000_media_type_copper)
? igb_setup_copper_link_82575
- : igb_setup_fiber_serdes_link_82575;
+ : igb_setup_serdes_link_82575;
/* NVM initialization */
eecd = rd32(E1000_EECD);
@@ -379,6 +382,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val = 0;
u16 phy_id;
+ u32 ctrl_ext;
/*
* For SGMII PHYs, we try the list of possible addresses until
@@ -393,6 +397,12 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
goto out;
}
+ /* Power on sgmii phy if it is disabled */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ wr32(E1000_CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA);
+ wrfl();
+ msleep(300);
+
/*
* The address field in the I2CCMD register is 3 bits and 0 is invalid.
* Therefore, we need to test 1-7
@@ -418,9 +428,12 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
phy->addr = 0;
ret_val = -E1000_ERR_PHY;
goto out;
+ } else {
+ ret_val = igb_get_phy_id(hw);
}
- ret_val = igb_get_phy_id(hw);
+ /* restore previous sfp cage power state */
+ wr32(E1000_CTRL_EXT, ctrl_ext);
out:
return ret_val;
@@ -766,17 +779,18 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
}
/**
- * igb_shutdown_fiber_serdes_link_82575 - Remove link during power down
+ * igb_shutdown_serdes_link_82575 - Remove link during power down
* @hw: pointer to the HW structure
*
* In the case of fiber serdes, shut down optics and PCS on driver unload
* when management pass thru is not enabled.
**/
-void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw)
+void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
{
u32 reg;
- if (hw->phy.media_type != e1000_media_type_internal_serdes)
+ if (hw->phy.media_type != e1000_media_type_internal_serdes ||
+ igb_sgmii_active_82575(hw))
return;
/* if the management interface is not enabled, then power down */
@@ -788,7 +802,7 @@ void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw)
/* shutdown the laser */
reg = rd32(E1000_CTRL_EXT);
- reg |= E1000_CTRL_EXT_SDP7_DATA;
+ reg |= E1000_CTRL_EXT_SDP3_DATA;
wr32(E1000_CTRL_EXT, reg);
/* flush the write to verify completion */
@@ -927,6 +941,17 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
wr32(E1000_CTRL, ctrl);
+ ret_val = igb_setup_serdes_link_82575(hw);
+ if (ret_val)
+ goto out;
+
+ if (igb_sgmii_active_82575(hw) && !hw->phy.reset_disable) {
+ ret_val = hw->phy.ops.reset(hw);
+ if (ret_val) {
+ hw_dbg("Error resetting the PHY.\n");
+ goto out;
+ }
+ }
switch (hw->phy.type) {
case e1000_phy_m88:
ret_val = igb_copper_link_setup_m88(hw);
@@ -963,8 +988,6 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
}
}
- igb_configure_pcs_link_82575(hw);
-
/*
* Check link status. Wait up to 100 microseconds for link to become
* valid.
@@ -987,14 +1010,18 @@ out:
}
/**
- * igb_setup_fiber_serdes_link_82575 - Setup link for fiber/serdes
+ * igb_setup_serdes_link_82575 - Setup link for fiber/serdes
* @hw: pointer to the HW structure
*
* Configures speed and duplex for fiber and serdes links.
**/
-static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
+static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
{
- u32 reg;
+ u32 ctrl_reg, reg;
+
+ if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+ !igb_sgmii_active_82575(hw))
+ return 0;
/*
* On the 82575, SerDes loopback mode persists until it is
@@ -1004,26 +1031,38 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
*/
wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
- /* Force link up, set 1gb, set both sw defined pins */
- reg = rd32(E1000_CTRL);
- reg |= E1000_CTRL_SLU |
- E1000_CTRL_SPD_1000 |
- E1000_CTRL_FRCSPD |
- E1000_CTRL_SWDPIN0 |
- E1000_CTRL_SWDPIN1;
- wr32(E1000_CTRL, reg);
-
- /* Power on phy for 82576 fiber adapters */
- if (hw->mac.type == e1000_82576) {
- reg = rd32(E1000_CTRL_EXT);
- reg &= ~E1000_CTRL_EXT_SDP7_DATA;
- wr32(E1000_CTRL_EXT, reg);
+ /* power on the sfp cage if present */
+ reg = rd32(E1000_CTRL_EXT);
+ reg &= ~E1000_CTRL_EXT_SDP3_DATA;
+ wr32(E1000_CTRL_EXT, reg);
+
+ ctrl_reg = rd32(E1000_CTRL);
+ ctrl_reg |= E1000_CTRL_SLU;
+
+ if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) {
+ /* set both sw defined pins */
+ ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1;
+
+ /* Set switch control to serdes energy detect */
+ reg = rd32(E1000_CONNSW);
+ reg |= E1000_CONNSW_ENRGSRC;
+ wr32(E1000_CONNSW, reg);
+ }
+
+ reg = rd32(E1000_PCS_LCTL);
+
+ if (igb_sgmii_active_82575(hw)) {
+ /* allow time for SFP cage to power up phy */
+ msleep(300);
+
+ /* AN time out should be disabled for SGMII mode */
+ reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
+ } else {
+ ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
+ E1000_CTRL_FD | E1000_CTRL_FRCDPX;
}
- /* Set switch control to serdes energy detect */
- reg = rd32(E1000_CONNSW);
- reg |= E1000_CONNSW_ENRGSRC;
- wr32(E1000_CONNSW, reg);
+ wr32(E1000_CTRL, ctrl_reg);
/*
* New SerDes mode allows for forcing speed or autonegotiating speed
@@ -1031,12 +1070,21 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
* mode that will be compatible with older link partners and switches.
* However, both are supported by the hardware and some drivers/tools.
*/
- reg = rd32(E1000_PCS_LCTL);
reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
- if (hw->mac.autoneg) {
+ /*
+ * We force flow control to prevent the CTRL register values from being
+ * overwritten by the autonegotiated flow control values
+ */
+ reg |= E1000_PCS_LCTL_FORCE_FCTRL;
+
+ /*
+ * we always set sgmii to autoneg since it is the phy that will be
+ * forcing the link and the serdes is just a go-between
+ */
+ if (hw->mac.autoneg || igb_sgmii_active_82575(hw)) {
/* Set PCS register for autoneg */
reg |= E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */
E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */
@@ -1053,75 +1101,12 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg);
}
- if (hw->mac.type == e1000_82576) {
- reg |= E1000_PCS_LCTL_FORCE_FCTRL;
- igb_force_mac_fc(hw);
- }
-
wr32(E1000_PCS_LCTL, reg);
- return 0;
-}
-
-/**
- * igb_configure_pcs_link_82575 - Configure PCS link
- * @hw: pointer to the HW structure
- *
- * Configure the physical coding sub-layer (PCS) link. The PCS link is
- * only used on copper connections where the serialized gigabit media
- * independent interface (sgmii) is being used. Configures the link
- * for auto-negotiation or forces speed/duplex.
- **/
-static void igb_configure_pcs_link_82575(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- u32 reg = 0;
-
- if (hw->phy.media_type != e1000_media_type_copper ||
- !(igb_sgmii_active_82575(hw)))
- return;
-
- /* For SGMII, we need to issue a PCS autoneg restart */
- reg = rd32(E1000_PCS_LCTL);
-
- /* AN time out should be disabled for SGMII mode */
- reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
-
- if (mac->autoneg) {
- /* Make sure forced speed and force link are not set */
- reg &= ~(E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
-
- /*
- * The PHY should be setup prior to calling this function.
- * All we need to do is restart autoneg and enable autoneg.
- */
- reg |= E1000_PCS_LCTL_AN_RESTART | E1000_PCS_LCTL_AN_ENABLE;
- } else {
- /* Set PCS register for forced speed */
-
- /* Turn off bits for full duplex, speed, and autoneg */
- reg &= ~(E1000_PCS_LCTL_FSV_1000 |
- E1000_PCS_LCTL_FSV_100 |
- E1000_PCS_LCTL_FDV_FULL |
- E1000_PCS_LCTL_AN_ENABLE);
-
- /* Check for duplex first */
- if (mac->forced_speed_duplex & E1000_ALL_FULL_DUPLEX)
- reg |= E1000_PCS_LCTL_FDV_FULL;
-
- /* Now set speed */
- if (mac->forced_speed_duplex & E1000_ALL_100_SPEED)
- reg |= E1000_PCS_LCTL_FSV_100;
-
- /* Force speed and force link */
- reg |= E1000_PCS_LCTL_FSD |
- E1000_PCS_LCTL_FORCE_LINK |
- E1000_PCS_LCTL_FLV_LINK_UP;
+ if (!igb_sgmii_active_82575(hw))
+ igb_force_mac_fc(hw);
- hw_dbg("Wrote 0x%08X to PCS_LCTL to configure forced link\n",
- reg);
- }
- wr32(E1000_PCS_LCTL, reg);
+ return 0;
}
/**
@@ -1248,7 +1233,8 @@ static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
temp = rd32(E1000_LENERRS);
/* This register should not be read in copper configurations */
- if (hw->phy.media_type == e1000_media_type_internal_serdes)
+ if (hw->phy.media_type == e1000_media_type_internal_serdes ||
+ igb_sgmii_active_82575(hw))
temp = rd32(E1000_SCVPC);
}
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
index 8a1e659..ebd146f 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/igb/e1000_82575.h
@@ -28,7 +28,7 @@
#ifndef _E1000_82575_H_
#define _E1000_82575_H_
-extern void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw);
+extern void igb_shutdown_serdes_link_82575(struct e1000_hw *hw);
extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index c858293..cb91683 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -44,7 +44,7 @@
#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
/* Extended Device Control */
-#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
+#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */
/* Physical Func Reset Done Indication */
#define E1000_CTRL_EXT_PFRSTD 0x00004000
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 943186b..d2639c4 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -5320,7 +5320,7 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
*enable_wake = wufc || adapter->en_mng_pt;
if (!*enable_wake)
- igb_shutdown_fiber_serdes_link_82575(hw);
+ igb_shutdown_serdes_link_82575(hw);
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
generated by cgit v1.1 at 2024-10-31 01:32:05 +0000