diff options
Diffstat (limited to 'include/linux/i2c')
| -rw-r--r-- | include/linux/i2c/ads1015.h | 36 | ||||
| -rw-r--r-- | include/linux/i2c/atmel_mxt_ts.h (renamed from include/linux/i2c/qt602240_ts.h) | 34 | ||||
| -rw-r--r-- | include/linux/i2c/max6639.h | 14 | ||||
| -rw-r--r-- | include/linux/i2c/mcs.h | 1 | ||||
| -rw-r--r-- | include/linux/i2c/pmbus.h | 45 | ||||
| -rw-r--r-- | include/linux/i2c/pxa-i2c.h | 82 | ||||
| -rw-r--r-- | include/linux/i2c/twl.h | 6 | ||||
| -rw-r--r-- | include/linux/i2c/twl4030-madc.h | 141 |
8 files changed, 343 insertions, 16 deletions
diff --git a/include/linux/i2c/ads1015.h b/include/linux/i2c/ads1015.h new file mode 100644 index 0000000..d5aa2a0 --- /dev/null +++ b/include/linux/i2c/ads1015.h @@ -0,0 +1,36 @@ +/* + * Platform Data for ADS1015 12-bit 4-input ADC + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef LINUX_ADS1015_H +#define LINUX_ADS1015_H + +#define ADS1015_CHANNELS 8 + +struct ads1015_channel_data { + bool enabled; + unsigned int pga; + unsigned int data_rate; +}; + +struct ads1015_platform_data { + struct ads1015_channel_data channel_data[ADS1015_CHANNELS]; +}; + +#endif /* LINUX_ADS1015_H */ diff --git a/include/linux/i2c/qt602240_ts.h b/include/linux/i2c/atmel_mxt_ts.h index c5033e1..f027f7a 100644 --- a/include/linux/i2c/qt602240_ts.h +++ b/include/linux/i2c/atmel_mxt_ts.h @@ -1,5 +1,5 @@ /* - * AT42QT602240/ATMXT224 Touchscreen driver + * Atmel maXTouch Touchscreen driver * * Copyright (C) 2010 Samsung Electronics Co.Ltd * Author: Joonyoung Shim <jy0922.shim@samsung.com> @@ -10,21 +10,26 @@ * option) any later version. */ -#ifndef __LINUX_QT602240_TS_H -#define __LINUX_QT602240_TS_H +#ifndef __LINUX_ATMEL_MXT_TS_H +#define __LINUX_ATMEL_MXT_TS_H + +#include <linux/types.h> /* Orient */ -#define QT602240_NORMAL 0x0 -#define QT602240_DIAGONAL 0x1 -#define QT602240_HORIZONTAL_FLIP 0x2 -#define QT602240_ROTATED_90_COUNTER 0x3 -#define QT602240_VERTICAL_FLIP 0x4 -#define QT602240_ROTATED_90 0x5 -#define QT602240_ROTATED_180 0x6 -#define QT602240_DIAGONAL_COUNTER 0x7 +#define MXT_NORMAL 0x0 +#define MXT_DIAGONAL 0x1 +#define MXT_HORIZONTAL_FLIP 0x2 +#define MXT_ROTATED_90_COUNTER 0x3 +#define MXT_VERTICAL_FLIP 0x4 +#define MXT_ROTATED_90 0x5 +#define MXT_ROTATED_180 0x6 +#define MXT_DIAGONAL_COUNTER 0x7 + +/* The platform data for the Atmel maXTouch touchscreen driver */ +struct mxt_platform_data { + const u8 *config; + size_t config_length; -/* The platform data for the AT42QT602240/ATMXT224 touchscreen driver */ -struct qt602240_platform_data { unsigned int x_line; unsigned int y_line; unsigned int x_size; @@ -33,6 +38,7 @@ struct qt602240_platform_data { unsigned int threshold; unsigned int voltage; unsigned char orient; + unsigned long irqflags; }; -#endif /* __LINUX_QT602240_TS_H */ +#endif /* __LINUX_ATMEL_MXT_TS_H */ diff --git a/include/linux/i2c/max6639.h b/include/linux/i2c/max6639.h new file mode 100644 index 0000000..6011c42 --- /dev/null +++ b/include/linux/i2c/max6639.h @@ -0,0 +1,14 @@ +#ifndef _LINUX_MAX6639_H +#define _LINUX_MAX6639_H + +#include <linux/types.h> + +/* platform data for the MAX6639 temperature sensor and fan control */ + +struct max6639_platform_data { + bool pwm_polarity; /* Polarity low (0) or high (1, default) */ + int ppr; /* Pulses per rotation 1..4 (default == 2) */ + int rpm_range; /* 2000, 4000 (default), 8000 or 16000 */ +}; + +#endif /* _LINUX_MAX6639_H */ diff --git a/include/linux/i2c/mcs.h b/include/linux/i2c/mcs.h index 725ae7c..61bb18a 100644 --- a/include/linux/i2c/mcs.h +++ b/include/linux/i2c/mcs.h @@ -18,6 +18,7 @@ #define MCS_KEY_CODE(v) ((v) & 0xffff) struct mcs_platform_data { + void (*poweron)(bool); void (*cfg_pin)(void); /* touchscreen */ diff --git a/include/linux/i2c/pmbus.h b/include/linux/i2c/pmbus.h new file mode 100644 index 0000000..69280db --- /dev/null +++ b/include/linux/i2c/pmbus.h @@ -0,0 +1,45 @@ +/* + * Hardware monitoring driver for PMBus devices + * + * Copyright (c) 2010, 2011 Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _PMBUS_H_ +#define _PMBUS_H_ + +/* flags */ + +/* + * PMBUS_SKIP_STATUS_CHECK + * + * During register detection, skip checking the status register for + * communication or command errors. + * + * Some PMBus chips respond with valid data when trying to read an unsupported + * register. For such chips, checking the status register is mandatory when + * trying to determine if a chip register exists or not. + * Other PMBus chips don't support the STATUS_CML register, or report + * communication errors for no explicable reason. For such chips, checking + * the status register must be disabled. + */ +#define PMBUS_SKIP_STATUS_CHECK (1 << 0) + +struct pmbus_platform_data { + u32 flags; /* Device specific flags */ +}; + +#endif /* _PMBUS_H_ */ diff --git a/include/linux/i2c/pxa-i2c.h b/include/linux/i2c/pxa-i2c.h new file mode 100644 index 0000000..1a9f65e --- /dev/null +++ b/include/linux/i2c/pxa-i2c.h @@ -0,0 +1,82 @@ +/* + * i2c_pxa.h + * + * Copyright (C) 2002 Intrinsyc Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef _I2C_PXA_H_ +#define _I2C_PXA_H_ + +#if 0 +#define DEF_TIMEOUT 3 +#else +/* need a longer timeout if we're dealing with the fact we may well be + * looking at a multi-master environment +*/ +#define DEF_TIMEOUT 32 +#endif + +#define BUS_ERROR (-EREMOTEIO) +#define XFER_NAKED (-ECONNREFUSED) +#define I2C_RETRY (-2000) /* an error has occurred retry transmit */ + +/* ICR initialize bit values +* +* 15. FM 0 (100 Khz operation) +* 14. UR 0 (No unit reset) +* 13. SADIE 0 (Disables the unit from interrupting on slave addresses +* matching its slave address) +* 12. ALDIE 0 (Disables the unit from interrupt when it loses arbitration +* in master mode) +* 11. SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode) +* 10. BEIE 1 (Enable interrupts from detected bus errors, no ACK sent) +* 9. IRFIE 1 (Enable interrupts from full buffer received) +* 8. ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty) +* 7. GCD 1 (Disables i2c unit response to general call messages as a slave) +* 6. IUE 0 (Disable unit until we change settings) +* 5. SCLE 1 (Enables the i2c clock output for master mode (drives SCL) +* 4. MA 0 (Only send stop with the ICR stop bit) +* 3. TB 0 (We are not transmitting a byte initially) +* 2. ACKNAK 0 (Send an ACK after the unit receives a byte) +* 1. STOP 0 (Do not send a STOP) +* 0. START 0 (Do not send a START) +* +*/ +#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) + +/* I2C status register init values + * + * 10. BED 1 (Clear bus error detected) + * 9. SAD 1 (Clear slave address detected) + * 7. IRF 1 (Clear IDBR Receive Full) + * 6. ITE 1 (Clear IDBR Transmit Empty) + * 5. ALD 1 (Clear Arbitration Loss Detected) + * 4. SSD 1 (Clear Slave Stop Detected) + */ +#define I2C_ISR_INIT 0x7FF /* status register init */ + +struct i2c_slave_client; + +struct i2c_pxa_platform_data { + unsigned int slave_addr; + struct i2c_slave_client *slave; + unsigned int class; + unsigned int use_pio :1; + unsigned int fast_mode :1; +}; + +extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info); + +#ifdef CONFIG_PXA27x +extern void pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info); +#endif + +#ifdef CONFIG_PXA3xx +extern void pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info); +#endif + +#endif diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 61b9609..0c0d1ae 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -600,6 +600,8 @@ struct twl4030_usb_data { int (*phy_power)(struct device *dev, int iD, int on); /* enable/disable phy clocks */ int (*phy_set_clock)(struct device *dev, int on); + /* suspend/resume of phy */ + int (*phy_suspend)(struct device *dev, int suspend); }; struct twl4030_ins { @@ -637,7 +639,6 @@ extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts); extern int twl4030_remove_script(u8 flags); struct twl4030_codec_audio_data { - unsigned int audio_mclk; /* not used, will be removed */ unsigned int digimic_delay; /* in ms */ unsigned int ramp_delay_value; unsigned int offset_cncl_path; @@ -648,7 +649,6 @@ struct twl4030_codec_audio_data { }; struct twl4030_codec_vibra_data { - unsigned int audio_mclk; unsigned int coexist; }; @@ -698,6 +698,7 @@ struct twl4030_platform_data { struct regulator_init_data *vana; struct regulator_init_data *vcxio; struct regulator_init_data *vusb; + struct regulator_init_data *clk32kg; }; /*----------------------------------------------------------------------*/ @@ -777,5 +778,6 @@ static inline int twl4030charger_usb_en(int enable) { return 0; } /* INTERNAL LDOs */ #define TWL6030_REG_VRTC 47 +#define TWL6030_REG_CLK32KG 48 #endif /* End of __TWL4030_H */ diff --git a/include/linux/i2c/twl4030-madc.h b/include/linux/i2c/twl4030-madc.h new file mode 100644 index 0000000..6427d29 --- /dev/null +++ b/include/linux/i2c/twl4030-madc.h @@ -0,0 +1,141 @@ +/* + * twl4030_madc.h - Header for TWL4030 MADC + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * J Keerthy <j-keerthy@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef _TWL4030_MADC_H +#define _TWL4030_MADC_H + +struct twl4030_madc_conversion_method { + u8 sel; + u8 avg; + u8 rbase; + u8 ctrl; +}; + +#define TWL4030_MADC_MAX_CHANNELS 16 + + +/* + * twl4030_madc_request- madc request packet for channel conversion + * @channels: 16 bit bitmap for individual channels + * @do_avgP: sample the input channel for 4 consecutive cycles + * @method: RT, SW1, SW2 + * @type: Polling or interrupt based method + */ + +struct twl4030_madc_request { + unsigned long channels; + u16 do_avg; + u16 method; + u16 type; + bool active; + bool result_pending; + int rbuf[TWL4030_MADC_MAX_CHANNELS]; + void (*func_cb)(int len, int channels, int *buf); +}; + +enum conversion_methods { + TWL4030_MADC_RT, + TWL4030_MADC_SW1, + TWL4030_MADC_SW2, + TWL4030_MADC_NUM_METHODS +}; + +enum sample_type { + TWL4030_MADC_WAIT, + TWL4030_MADC_IRQ_ONESHOT, + TWL4030_MADC_IRQ_REARM +}; + +#define TWL4030_MADC_CTRL1 0x00 +#define TWL4030_MADC_CTRL2 0x01 + +#define TWL4030_MADC_RTSELECT_LSB 0x02 +#define TWL4030_MADC_SW1SELECT_LSB 0x06 +#define TWL4030_MADC_SW2SELECT_LSB 0x0A + +#define TWL4030_MADC_RTAVERAGE_LSB 0x04 +#define TWL4030_MADC_SW1AVERAGE_LSB 0x08 +#define TWL4030_MADC_SW2AVERAGE_LSB 0x0C + +#define TWL4030_MADC_CTRL_SW1 0x12 +#define TWL4030_MADC_CTRL_SW2 0x13 + +#define TWL4030_MADC_RTCH0_LSB 0x17 +#define TWL4030_MADC_GPCH0_LSB 0x37 + +#define TWL4030_MADC_MADCON (1 << 0) /* MADC power on */ +#define TWL4030_MADC_BUSY (1 << 0) /* MADC busy */ +/* MADC conversion completion */ +#define TWL4030_MADC_EOC_SW (1 << 1) +/* MADC SWx start conversion */ +#define TWL4030_MADC_SW_START (1 << 5) +#define TWL4030_MADC_ADCIN0 (1 << 0) +#define TWL4030_MADC_ADCIN1 (1 << 1) +#define TWL4030_MADC_ADCIN2 (1 << 2) +#define TWL4030_MADC_ADCIN3 (1 << 3) +#define TWL4030_MADC_ADCIN4 (1 << 4) +#define TWL4030_MADC_ADCIN5 (1 << 5) +#define TWL4030_MADC_ADCIN6 (1 << 6) +#define TWL4030_MADC_ADCIN7 (1 << 7) +#define TWL4030_MADC_ADCIN8 (1 << 8) +#define TWL4030_MADC_ADCIN9 (1 << 9) +#define TWL4030_MADC_ADCIN10 (1 << 10) +#define TWL4030_MADC_ADCIN11 (1 << 11) +#define TWL4030_MADC_ADCIN12 (1 << 12) +#define TWL4030_MADC_ADCIN13 (1 << 13) +#define TWL4030_MADC_ADCIN14 (1 << 14) +#define TWL4030_MADC_ADCIN15 (1 << 15) + +/* Fixed channels */ +#define TWL4030_MADC_BTEMP TWL4030_MADC_ADCIN1 +#define TWL4030_MADC_VBUS TWL4030_MADC_ADCIN8 +#define TWL4030_MADC_VBKB TWL4030_MADC_ADCIN9 +#define TWL4030_MADC_ICHG TWL4030_MADC_ADCIN10 +#define TWL4030_MADC_VCHG TWL4030_MADC_ADCIN11 +#define TWL4030_MADC_VBAT TWL4030_MADC_ADCIN12 + +/* Step size and prescaler ratio */ +#define TEMP_STEP_SIZE 147 +#define TEMP_PSR_R 100 +#define CURR_STEP_SIZE 147 +#define CURR_PSR_R1 44 +#define CURR_PSR_R2 88 + +#define TWL4030_BCI_BCICTL1 0x23 +#define TWL4030_BCI_CGAIN 0x020 +#define TWL4030_BCI_MESBAT (1 << 1) +#define TWL4030_BCI_TYPEN (1 << 4) +#define TWL4030_BCI_ITHEN (1 << 3) + +#define REG_BCICTL2 0x024 +#define TWL4030_BCI_ITHSENS 0x007 + +struct twl4030_madc_user_parms { + int channel; + int average; + int status; + u16 result; +}; + +int twl4030_madc_conversion(struct twl4030_madc_request *conv); +int twl4030_get_madc_conversion(int channel_no); +#endif |