aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/mfd/ti_ssp.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mfd/ti_ssp.h')
-rw-r--r--include/linux/mfd/ti_ssp.h93
1 files changed, 93 insertions, 0 deletions
diff --git a/include/linux/mfd/ti_ssp.h b/include/linux/mfd/ti_ssp.h
new file mode 100644
index 0000000..dbb4b43
--- /dev/null
+++ b/include/linux/mfd/ti_ssp.h
@@ -0,0 +1,93 @@
+/*
+ * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs
+ *
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __TI_SSP_H__
+#define __TI_SSP_H__
+
+struct ti_ssp_dev_data {
+ const char *dev_name;
+ void *pdata;
+ size_t pdata_size;
+};
+
+struct ti_ssp_data {
+ unsigned long out_clock;
+ struct ti_ssp_dev_data dev_data[2];
+};
+
+struct ti_ssp_spi_data {
+ unsigned long iosel;
+ int num_cs;
+ void (*select)(int cs);
+};
+
+/*
+ * Sequencer port IO pin configuration bits. These do not correlate 1-1 with
+ * the hardware. The iosel field in the port data combines iosel1 and iosel2,
+ * and is therefore not a direct map to register space. It is best to use the
+ * macros below to construct iosel values.
+ *
+ * least significant 16 bits --> iosel1
+ * most significant 16 bits --> iosel2
+ */
+
+#define SSP_IN 0x0000
+#define SSP_DATA 0x0001
+#define SSP_CLOCK 0x0002
+#define SSP_CHIPSEL 0x0003
+#define SSP_OUT 0x0004
+#define SSP_PIN_SEL(pin, v) ((v) << ((pin) * 3))
+#define SSP_PIN_MASK(pin) SSP_PIN_SEL(pin, 0x7)
+#define SSP_INPUT_SEL(pin) ((pin) << 16)
+
+/* Sequencer port config bits */
+#define SSP_EARLY_DIN BIT(8)
+#define SSP_DELAY_DOUT BIT(9)
+
+/* Sequence map definitions */
+#define SSP_CLK_HIGH BIT(0)
+#define SSP_CLK_LOW 0
+#define SSP_DATA_HIGH BIT(1)
+#define SSP_DATA_LOW 0
+#define SSP_CS_HIGH BIT(2)
+#define SSP_CS_LOW 0
+#define SSP_OUT_MODE BIT(3)
+#define SSP_IN_MODE 0
+#define SSP_DATA_REG BIT(4)
+#define SSP_ADDR_REG 0
+
+#define SSP_OPCODE_DIRECT ((0x0) << 5)
+#define SSP_OPCODE_TOGGLE ((0x1) << 5)
+#define SSP_OPCODE_SHIFT ((0x2) << 5)
+#define SSP_OPCODE_BRANCH0 ((0x4) << 5)
+#define SSP_OPCODE_BRANCH1 ((0x5) << 5)
+#define SSP_OPCODE_BRANCH ((0x6) << 5)
+#define SSP_OPCODE_STOP ((0x7) << 5)
+#define SSP_BRANCH(addr) ((addr) << 8)
+#define SSP_COUNT(cycles) ((cycles) << 8)
+
+int ti_ssp_raw_read(struct device *dev);
+int ti_ssp_raw_write(struct device *dev, u32 val);
+int ti_ssp_load(struct device *dev, int offs, u32* prog, int len);
+int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output);
+int ti_ssp_set_mode(struct device *dev, int mode);
+int ti_ssp_set_iosel(struct device *dev, u32 iosel);
+
+#endif /* __TI_SSP_H__ */