diff options
Diffstat (limited to 'include/linux/mpu6050b1.h')
-rw-r--r-- | include/linux/mpu6050b1.h | 439 |
1 files changed, 439 insertions, 0 deletions
diff --git a/include/linux/mpu6050b1.h b/include/linux/mpu6050b1.h new file mode 100644 index 0000000..8758ce1 --- /dev/null +++ b/include/linux/mpu6050b1.h @@ -0,0 +1,439 @@ +/* + $License: + Copyright (C) 2011 InvenSense Corporation, All Rights Reserved. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + $ + */ + +/** + * @defgroup + * @brief + * + * @{ + * @file mpu6050.h + * @brief + */ + +#ifndef __MPU_H_ +#error Do not include this file directly. Include mpu.h instead. +#endif + +#ifndef __MPU6050B1_H_ +#define __MPU6050B1_H_ + +#if !defined CONFIG_MPU_SENSORS_MPU6050B1 +#error Invalid or undefined CONFIG_MPU_SENSORS_MPUxxxx +#endif + +#define MPU_NAME "mpu6050B1" +#define DEFAULT_MPU_SLAVEADDR 0x68 + +/*==== MPU6050B1 REGISTER SET ====*/ +enum { + MPUREG_XG_OFFS_TC = 0, /* 0x00, 0 */ + MPUREG_YG_OFFS_TC, /* 0x01, 1 */ + MPUREG_ZG_OFFS_TC, /* 0x02, 2 */ + MPUREG_X_FINE_GAIN, /* 0x03, 3 */ + MPUREG_Y_FINE_GAIN, /* 0x04, 4 */ + MPUREG_Z_FINE_GAIN, /* 0x05, 5 */ + MPUREG_XA_OFFS_H, /* 0x06, 6 */ + MPUREG_XA_OFFS_L, /* 0x07, 7 */ + MPUREG_YA_OFFS_H, /* 0x08, 8 */ + MPUREG_YA_OFFS_L, /* 0x09, 9 */ + MPUREG_ZA_OFFS_H, /* 0x0a, 10 */ + MPUREG_ZA_OFFS_L, /* 0x0B, 11 */ + MPUREG_PRODUCT_ID, /* 0x0c, 12 */ + MPUREG_0D_RSVD, /* 0x0d, 13 */ + MPUREG_0E_RSVD, /* 0x0e, 14 */ + MPUREG_0F_RSVD, /* 0x0f, 15 */ + MPUREG_10_RSVD, /* 0x00, 16 */ + MPUREG_11_RSVD, /* 0x11, 17 */ + MPUREG_12_RSVD, /* 0x12, 18 */ + MPUREG_XG_OFFS_USRH, /* 0x13, 19 */ + MPUREG_XG_OFFS_USRL, /* 0x14, 20 */ + MPUREG_YG_OFFS_USRH, /* 0x15, 21 */ + MPUREG_YG_OFFS_USRL, /* 0x16, 22 */ + MPUREG_ZG_OFFS_USRH, /* 0x17, 23 */ + MPUREG_ZG_OFFS_USRL, /* 0x18, 24 */ + MPUREG_SMPLRT_DIV, /* 0x19, 25 */ + MPUREG_CONFIG, /* 0x1A, 26 */ + MPUREG_GYRO_CONFIG, /* 0x1b, 27 */ + MPUREG_ACCEL_CONFIG, /* 0x1c, 28 */ + MPUREG_ACCEL_FF_THR, /* 0x1d, 29 */ + MPUREG_ACCEL_FF_DUR, /* 0x1e, 30 */ + MPUREG_ACCEL_MOT_THR, /* 0x1f, 31 */ + MPUREG_ACCEL_MOT_DUR, /* 0x20, 32 */ + MPUREG_ACCEL_ZRMOT_THR, /* 0x21, 33 */ + MPUREG_ACCEL_ZRMOT_DUR, /* 0x22, 34 */ + MPUREG_FIFO_EN, /* 0x23, 35 */ + MPUREG_I2C_MST_CTRL, /* 0x24, 36 */ + MPUREG_I2C_SLV0_ADDR, /* 0x25, 37 */ + MPUREG_I2C_SLV0_REG, /* 0x26, 38 */ + MPUREG_I2C_SLV0_CTRL, /* 0x27, 39 */ + MPUREG_I2C_SLV1_ADDR, /* 0x28, 40 */ + MPUREG_I2C_SLV1_REG_PASSWORD, /* 0x29, 41 */ + MPUREG_I2C_SLV1_CTRL, /* 0x2a, 42 */ + MPUREG_I2C_SLV2_ADDR, /* 0x2B, 43 */ + MPUREG_I2C_SLV2_REG, /* 0x2c, 44 */ + MPUREG_I2C_SLV2_CTRL, /* 0x2d, 45 */ + MPUREG_I2C_SLV3_ADDR, /* 0x2E, 46 */ + MPUREG_I2C_SLV3_REG, /* 0x2f, 47 */ + MPUREG_I2C_SLV3_CTRL, /* 0x30, 48 */ + MPUREG_I2C_SLV4_ADDR, /* 0x31, 49 */ + MPUREG_I2C_SLV4_REG, /* 0x32, 50 */ + MPUREG_I2C_SLV4_DO, /* 0x33, 51 */ + MPUREG_I2C_SLV4_CTRL, /* 0x34, 52 */ + MPUREG_I2C_SLV4_DI, /* 0x35, 53 */ + MPUREG_I2C_MST_STATUS, /* 0x36, 54 */ + MPUREG_INT_PIN_CFG, /* 0x37, 55 */ + MPUREG_INT_ENABLE, /* 0x38, 56 */ + MPUREG_DMP_INT_STATUS, /* 0x39, 57 */ + MPUREG_INT_STATUS, /* 0x3A, 58 */ + MPUREG_ACCEL_XOUT_H, /* 0x3B, 59 */ + MPUREG_ACCEL_XOUT_L, /* 0x3c, 60 */ + MPUREG_ACCEL_YOUT_H, /* 0x3d, 61 */ + MPUREG_ACCEL_YOUT_L, /* 0x3e, 62 */ + MPUREG_ACCEL_ZOUT_H, /* 0x3f, 63 */ + MPUREG_ACCEL_ZOUT_L, /* 0x40, 64 */ + MPUREG_TEMP_OUT_H, /* 0x41, 65 */ + MPUREG_TEMP_OUT_L, /* 0x42, 66 */ + MPUREG_GYRO_XOUT_H, /* 0x43, 67 */ + MPUREG_GYRO_XOUT_L, /* 0x44, 68 */ + MPUREG_GYRO_YOUT_H, /* 0x45, 69 */ + MPUREG_GYRO_YOUT_L, /* 0x46, 70 */ + MPUREG_GYRO_ZOUT_H, /* 0x47, 71 */ + MPUREG_GYRO_ZOUT_L, /* 0x48, 72 */ + MPUREG_EXT_SLV_SENS_DATA_00, /* 0x49, 73 */ + MPUREG_EXT_SLV_SENS_DATA_01, /* 0x4a, 74 */ + MPUREG_EXT_SLV_SENS_DATA_02, /* 0x4b, 75 */ + MPUREG_EXT_SLV_SENS_DATA_03, /* 0x4c, 76 */ + MPUREG_EXT_SLV_SENS_DATA_04, /* 0x4d, 77 */ + MPUREG_EXT_SLV_SENS_DATA_05, /* 0x4e, 78 */ + MPUREG_EXT_SLV_SENS_DATA_06, /* 0x4F, 79 */ + MPUREG_EXT_SLV_SENS_DATA_07, /* 0x50, 80 */ + MPUREG_EXT_SLV_SENS_DATA_08, /* 0x51, 81 */ + MPUREG_EXT_SLV_SENS_DATA_09, /* 0x52, 82 */ + MPUREG_EXT_SLV_SENS_DATA_10, /* 0x53, 83 */ + MPUREG_EXT_SLV_SENS_DATA_11, /* 0x54, 84 */ + MPUREG_EXT_SLV_SENS_DATA_12, /* 0x55, 85 */ + MPUREG_EXT_SLV_SENS_DATA_13, /* 0x56, 86 */ + MPUREG_EXT_SLV_SENS_DATA_14, /* 0x57, 87 */ + MPUREG_EXT_SLV_SENS_DATA_15, /* 0x58, 88 */ + MPUREG_EXT_SLV_SENS_DATA_16, /* 0x59, 89 */ + MPUREG_EXT_SLV_SENS_DATA_17, /* 0x5a, 90 */ + MPUREG_EXT_SLV_SENS_DATA_18, /* 0x5B, 91 */ + MPUREG_EXT_SLV_SENS_DATA_19, /* 0x5c, 92 */ + MPUREG_EXT_SLV_SENS_DATA_20, /* 0x5d, 93 */ + MPUREG_EXT_SLV_SENS_DATA_21, /* 0x5e, 94 */ + MPUREG_EXT_SLV_SENS_DATA_22, /* 0x5f, 95 */ + MPUREG_EXT_SLV_SENS_DATA_23, /* 0x60, 96 */ + MPUREG_ACCEL_INTEL_STATUS, /* 0x61, 97 */ + MPUREG_62_RSVD, /* 0x62, 98 */ + MPUREG_I2C_SLV0_DO, /* 0x63, 99 */ + MPUREG_I2C_SLV1_DO, /* 0x64, 100 */ + MPUREG_I2C_SLV2_DO, /* 0x65, 101 */ + MPUREG_I2C_SLV3_DO, /* 0x66, 102 */ + MPUREG_I2C_MST_DELAY_CTRL, /* 0x67, 103 */ + MPUREG_SIGNAL_PATH_RESET, /* 0x68, 104 */ + MPUREG_ACCEL_INTEL_CTRL, /* 0x69, 105 */ + MPUREG_USER_CTRL, /* 0x6A, 106 */ + MPUREG_PWR_MGMT_1, /* 0x6B, 107 */ + MPUREG_PWR_MGMT_2, /* 0x6C, 108 */ + MPUREG_BANK_SEL, /* 0x6D, 109 */ + MPUREG_MEM_START_ADDR, /* 0x6E, 100 */ + MPUREG_MEM_R_W, /* 0x6F, 111 */ + MPUREG_DMP_CFG_1, /* 0x70, 112 */ + MPUREG_DMP_CFG_2, /* 0x71, 113 */ + MPUREG_FIFO_COUNTH, /* 0x72, 114 */ + MPUREG_FIFO_COUNTL, /* 0x73, 115 */ + MPUREG_FIFO_R_W, /* 0x74, 116 */ + MPUREG_WHOAMI, /* 0x75, 117 */ + + NUM_OF_MPU_REGISTERS /* = 0x76, 118 */ +}; + +/*==== MPU6050B1 MEMORY ====*/ +enum MPU_MEMORY_BANKS { + MEM_RAM_BANK_0 = 0, + MEM_RAM_BANK_1, + MEM_RAM_BANK_2, + MEM_RAM_BANK_3, + MEM_RAM_BANK_4, + MEM_RAM_BANK_5, + MEM_RAM_BANK_6, + MEM_RAM_BANK_7, + MEM_RAM_BANK_8, + MEM_RAM_BANK_9, + MEM_RAM_BANK_10, + MEM_RAM_BANK_11, + MPU_MEM_NUM_RAM_BANKS, + MPU_MEM_OTP_BANK_0 = 16 +}; + + +/*==== MPU6050B1 parameters ====*/ + +#define NUM_REGS (NUM_OF_MPU_REGISTERS) +#define START_SENS_REGS (0x3B) +#define NUM_SENS_REGS (0x60 - START_SENS_REGS + 1) + +/*---- MPU Memory ----*/ +#define NUM_BANKS (MPU_MEM_NUM_RAM_BANKS) +#define BANK_SIZE (256) +#define MEM_SIZE (NUM_BANKS * BANK_SIZE) +#define MPU_MEM_BANK_SIZE (BANK_SIZE) /*alternative name */ + +#define FIFO_HW_SIZE (1024) + +#define NUM_EXT_SLAVES (4) + + +/*==== BITS FOR MPU6050B1 ====*/ +/*---- MPU6050B1 'XG_OFFS_TC' register (0, 1, 2) ----*/ +#define BIT_PU_SLEEP_MODE 0x80 +#define BITS_XG_OFFS_TC 0x7E +#define BIT_OTP_BNK_VLD 0x01 + +#define BIT_I2C_MST_VDDIO 0x80 +#define BITS_YG_OFFS_TC 0x7E +#define BITS_ZG_OFFS_TC 0x7E +/*---- MPU6050B1 'FIFO_EN' register (23) ----*/ +#define BIT_TEMP_OUT 0x80 +#define BIT_GYRO_XOUT 0x40 +#define BIT_GYRO_YOUT 0x20 +#define BIT_GYRO_ZOUT 0x10 +#define BIT_ACCEL 0x08 +#define BIT_SLV_2 0x04 +#define BIT_SLV_1 0x02 +#define BIT_SLV_0 0x01 +/*---- MPU6050B1 'CONFIG' register (1A) ----*/ +/*NONE 0xC0 */ +#define BITS_EXT_SYNC_SET 0x38 +#define BITS_DLPF_CFG 0x07 +/*---- MPU6050B1 'GYRO_CONFIG' register (1B) ----*/ +/* voluntarily modified label from BITS_FS_SEL to + * BITS_GYRO_FS_SEL to avoid confusion with MPU + */ +#define BITS_GYRO_FS_SEL 0x18 +/*NONE 0x07 */ +/*---- MPU6050B1 'ACCEL_CONFIG' register (1C) ----*/ +#define BITS_ACCEL_FS_SEL 0x18 +#define BITS_ACCEL_HPF 0x07 +/*---- MPU6050B1 'I2C_MST_CTRL' register (24) ----*/ +#define BIT_MULT_MST_EN 0x80 +#define BIT_WAIT_FOR_ES 0x40 +#define BIT_SLV_3_FIFO_EN 0x20 +#define BIT_I2C_MST_PSR 0x10 +#define BITS_I2C_MST_CLK 0x0F +/*---- MPU6050B1 'I2C_SLV?_ADDR' register (27,2A,2D,30) ----*/ +#define BIT_I2C_READ 0x80 +#define BIT_I2C_WRITE 0x00 +#define BITS_I2C_ADDR 0x7F +/*---- MPU6050B1 'I2C_SLV?_CTRL' register (27,2A,2D,30) ----*/ +#define BIT_SLV_ENABLE 0x80 +#define BIT_SLV_BYTE_SW 0x40 +#define BIT_SLV_REG_DIS 0x20 +#define BIT_SLV_GRP 0x10 +#define BITS_SLV_LENG 0x0F +/*---- MPU6050B1 'I2C_SLV4_ADDR' register (31) ----*/ +#define BIT_I2C_SLV4_RNW 0x80 +/*---- MPU6050B1 'I2C_SLV4_CTRL' register (34) ----*/ +#define BIT_I2C_SLV4_EN 0x80 +#define BIT_SLV4_DONE_INT_EN 0x40 +#define BIT_SLV4_REG_DIS 0x20 +#define MASK_I2C_MST_DLY 0x1F +/*---- MPU6050B1 'I2C_MST_STATUS' register (36) ----*/ +#define BIT_PASS_THROUGH 0x80 +#define BIT_I2C_SLV4_DONE 0x40 +#define BIT_I2C_LOST_ARB 0x20 +#define BIT_I2C_SLV4_NACK 0x10 +#define BIT_I2C_SLV3_NACK 0x08 +#define BIT_I2C_SLV2_NACK 0x04 +#define BIT_I2C_SLV1_NACK 0x02 +#define BIT_I2C_SLV0_NACK 0x01 +/*---- MPU6050B1 'INT_PIN_CFG' register (37) ----*/ +#define BIT_ACTL 0x80 +#define BIT_ACTL_LOW 0x80 +#define BIT_ACTL_HIGH 0x00 +#define BIT_OPEN 0x40 +#define BIT_LATCH_INT_EN 0x20 +#define BIT_INT_ANYRD_2CLEAR 0x10 +#define BIT_ACTL_FSYNC 0x08 +#define BIT_FSYNC_INT_EN 0x04 +#define BIT_BYPASS_EN 0x02 +#define BIT_CLKOUT_EN 0x01 +/*---- MPU6050B1 'INT_ENABLE' register (38) ----*/ +#define BIT_FF_EN 0x80 +#define BIT_MOT_EN 0x40 +#define BIT_ZMOT_EN 0x20 +#define BIT_FIFO_OVERFLOW_EN 0x10 +#define BIT_I2C_MST_INT_EN 0x08 +#define BIT_PLL_RDY_EN 0x04 +#define BIT_DMP_INT_EN 0x02 +#define BIT_RAW_RDY_EN 0x01 +/*---- MPU6050B1 'DMP_INT_STATUS' register (39) ----*/ +/*NONE 0x80 */ +/*NONE 0x40 */ +#define BIT_DMP_INT_5 0x20 +#define BIT_DMP_INT_4 0x10 +#define BIT_DMP_INT_3 0x08 +#define BIT_DMP_INT_2 0x04 +#define BIT_DMP_INT_1 0x02 +#define BIT_DMP_INT_0 0x01 +/*---- MPU6050B1 'INT_STATUS' register (3A) ----*/ +#define BIT_FF_INT 0x80 +#define BIT_MOT_INT 0x40 +#define BIT_ZMOT_INT 0x20 +#define BIT_FIFO_OVERFLOW_INT 0x10 +#define BIT_I2C_MST_INT 0x08 +#define BIT_PLL_RDY_INT 0x04 +#define BIT_DMP_INT 0x02 +#define BIT_RAW_DATA_RDY_INT 0x01 +/*---- MPU6050B1 'MPUREG_I2C_MST_DELAY_CTRL' register (0x67) ----*/ +#define BIT_DELAY_ES_SHADOW 0x80 +#define BIT_SLV4_DLY_EN 0x10 +#define BIT_SLV3_DLY_EN 0x08 +#define BIT_SLV2_DLY_EN 0x04 +#define BIT_SLV1_DLY_EN 0x02 +#define BIT_SLV0_DLY_EN 0x01 +/*---- MPU6050B1 'BANK_SEL' register (6D) ----*/ +#define BIT_PRFTCH_EN 0x40 +#define BIT_CFG_USER_BANK 0x20 +#define BITS_MEM_SEL 0x1f +/*---- MPU6050B1 'USER_CTRL' register (6A) ----*/ +#define BIT_DMP_EN 0x80 +#define BIT_FIFO_EN 0x40 +#define BIT_I2C_MST_EN 0x20 +#define BIT_I2C_IF_DIS 0x10 +#define BIT_DMP_RST 0x08 +#define BIT_FIFO_RST 0x04 +#define BIT_I2C_MST_RST 0x02 +#define BIT_SIG_COND_RST 0x01 +/*---- MPU6050B1 'PWR_MGMT_1' register (6B) ----*/ +#define BIT_H_RESET 0x80 +#define BIT_SLEEP 0x40 +#define BIT_CYCLE 0x20 +#define BIT_PD_PTAT 0x08 +#define BITS_CLKSEL 0x07 +/*---- MPU6050B1 'PWR_MGMT_2' register (6C) ----*/ +#define BITS_LPA_WAKE_CTRL 0xC0 +#define BIT_STBY_XA 0x20 +#define BIT_STBY_YA 0x10 +#define BIT_STBY_ZA 0x08 +#define BIT_STBY_XG 0x04 +#define BIT_STBY_YG 0x02 +#define BIT_STBY_ZG 0x01 + +/* although it has 6, this refers to the gyros */ +#define MPU_NUM_AXES (3) + +#define ACCEL_MOT_THR_LSB (32) /* mg */ +#define ACCEL_MOT_DUR_LSB (1) +#define ACCEL_ZRMOT_THR_LSB_CONVERSION(mg) ((mg * 1000) / 255) +#define ACCEL_ZRMOT_DUR_LSB (64) + +/*----------------------------------------------------------------------------*/ +/*---- Alternative names to take care of conflicts with current mpu3050.h ----*/ +/*----------------------------------------------------------------------------*/ + +/*-- registers --*/ +#define MPUREG_DLPF_FS_SYNC MPUREG_CONFIG /* 0x1A */ + +#define MPUREG_PWR_MGM MPUREG_PWR_MGMT_1 /* 0x6B */ +#define MPUREG_FIFO_EN1 MPUREG_FIFO_EN /* 0x23 */ +#define MPUREG_INT_CFG MPUREG_INT_ENABLE /* 0x38 */ +#define MPUREG_X_OFFS_USRH MPUREG_XG_OFFS_USRH /* 0x13 */ +#define MPUREG_WHO_AM_I MPUREG_WHOAMI /* 0x75 */ +#define MPUREG_23_RSVD MPUREG_EXT_SLV_SENS_DATA_00 /* 0x49 */ +#define MPUREG_AUX_SLV_ADDR MPUREG_I2C_SLV0_ADDR /* 0x25 */ +#define MPUREG_ACCEL_BURST_ADDR MPUREG_I2C_SLV0_REG /* 0x26 */ + +/*-- bits --*/ +/* 'USER_CTRL' register */ +#define BIT_AUX_IF_EN BIT_I2C_MST_EN +#define BIT_AUX_RD_LENG BIT_I2C_MST_EN +#define BIT_IME_IF_RST BIT_I2C_MST_RST +#define BIT_GYRO_RST BIT_SIG_COND_RST +/* 'INT_ENABLE' register */ +#define BIT_RAW_RDY BIT_RAW_DATA_RDY_INT +#define BIT_MPU_RDY_EN BIT_PLL_RDY_EN +/* 'INT_STATUS' register */ +#define BIT_INT_STATUS_FIFO_OVERLOW BIT_FIFO_OVERFLOW_INT + +/*---- MPU6050 Silicon Revisions ----*/ +#define MPU_SILICON_REV_A2 1 /* MPU6050A2 Device */ +#define MPU_SILICON_REV_B1 2 /* MPU6050B1 Device */ + +/*---- MPU6050 notable product revisions ----*/ +#define MPU_PRODUCT_KEY_B1_E1_5 105 +#define MPU_PRODUCT_KEY_B2_F1 431 + +/*---- structure containing control variables used by MLDL ----*/ +/*---- MPU clock source settings ----*/ +/*---- MPU filter selections ----*/ +enum mpu_filter { + MPU_FILTER_256HZ_NOLPF2 = 0, + MPU_FILTER_188HZ, + MPU_FILTER_98HZ, + MPU_FILTER_42HZ, + MPU_FILTER_20HZ, + MPU_FILTER_10HZ, + MPU_FILTER_5HZ, + MPU_FILTER_2100HZ_NOLPF, + NUM_MPU_FILTER +}; + +enum mpu_fullscale { + MPU_FS_250DPS = 0, + MPU_FS_500DPS, + MPU_FS_1000DPS, + MPU_FS_2000DPS, + NUM_MPU_FS +}; + +enum mpu_clock_sel { + MPU_CLK_SEL_INTERNAL = 0, + MPU_CLK_SEL_PLLGYROX, + MPU_CLK_SEL_PLLGYROY, + MPU_CLK_SEL_PLLGYROZ, + MPU_CLK_SEL_PLLEXT32K, + MPU_CLK_SEL_PLLEXT19M, + MPU_CLK_SEL_RESERVED, + MPU_CLK_SEL_STOP, + NUM_CLK_SEL +}; + +enum mpu_ext_sync { + MPU_EXT_SYNC_NONE = 0, + MPU_EXT_SYNC_TEMP, + MPU_EXT_SYNC_GYROX, + MPU_EXT_SYNC_GYROY, + MPU_EXT_SYNC_GYROZ, + MPU_EXT_SYNC_ACCELX, + MPU_EXT_SYNC_ACCELY, + MPU_EXT_SYNC_ACCELZ, + NUM_MPU_EXT_SYNC +}; + +#define MPUREG_CONFIG_VALUE(ext_sync, lpf) \ + ((ext_sync << 3) | lpf) + +#define MPUREG_GYRO_CONFIG_VALUE(x_st, y_st, z_st, full_scale) \ + ((x_st ? 0x80 : 0) | \ + (y_st ? 0x70 : 0) | \ + (z_st ? 0x60 : 0) | \ + (full_scale << 3)) + +#endif /* __MPU6050_H_ */ |