diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/mtd/nand.h | 220 | ||||
| -rw-r--r-- | include/linux/mtd/ndfc.h | 66 |
2 files changed, 184 insertions, 102 deletions
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index da5e67b..4605258 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -11,47 +11,11 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Info: - * Contains standard defines and IDs for NAND flash devices + * Info: + * Contains standard defines and IDs for NAND flash devices * - * Changelog: - * 01-31-2000 DMW Created - * 09-18-2000 SJH Moved structure out of the Disk-On-Chip drivers - * so it can be used by other NAND flash device - * drivers. I also changed the copyright since none - * of the original contents of this file are specific - * to DoC devices. David can whack me with a baseball - * bat later if I did something naughty. - * 10-11-2000 SJH Added private NAND flash structure for driver - * 10-24-2000 SJH Added prototype for 'nand_scan' function - * 10-29-2001 TG changed nand_chip structure to support - * hardwarespecific function for accessing control lines - * 02-21-2002 TG added support for different read/write adress and - * ready/busy line access function - * 02-26-2002 TG added chip_delay to nand_chip structure to optimize - * command delay times for different chips - * 04-28-2002 TG OOB config defines moved from nand.c to avoid duplicate - * defines in jffs2/wbuf.c - * 08-07-2002 TG forced bad block location to byte 5 of OOB, even if - * CONFIG_MTD_NAND_ECC_JFFS2 is not set - * 08-10-2002 TG extensions to nand_chip structure to support HW-ECC - * - * 08-29-2002 tglx nand_chip structure: data_poi for selecting - * internal / fs-driver buffer - * support for 6byte/512byte hardware ECC - * read_ecc, write_ecc extended for different oob-layout - * oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB, - * NAND_YAFFS_OOB - * 11-25-2002 tglx Added Manufacturer code FUJITSU, NATIONAL - * Split manufacturer and device ID structures - * - * 02-08-2004 tglx added option field to nand structure for chip anomalities - * 05-25-2004 tglx added bad block table support, ST-MICRO manufacturer id - * update of nand_chip structure description - * 01-17-2005 dmarlin added extended commands for AG-AND device and added option - * for BBT_AUTO_REFRESH. - * 01-20-2005 dmarlin added optional pointer to hardware specific callback for - * extra error status checks. + * Changelog: + * See git changelog. */ #ifndef __LINUX_MTD_NAND_H #define __LINUX_MTD_NAND_H @@ -68,7 +32,8 @@ extern int nand_scan (struct mtd_info *mtd, int max_chips); extern void nand_release (struct mtd_info *mtd); /* Read raw data from the device without ECC */ -extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen); +extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, + size_t len, size_t ooblen); /* The maximum number of NAND chips in an array */ @@ -84,7 +49,7 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_ * Constants for hardware specific CLE/ALE/NCE function */ /* Select the chip by setting nCE to low */ -#define NAND_CTL_SETNCE 1 +#define NAND_CTL_SETNCE 1 /* Deselect the chip by setting nCE to high */ #define NAND_CTL_CLRNCE 2 /* Select the command latch by setting CLE to high */ @@ -148,21 +113,12 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_ /* * Constants for ECC_MODES */ - -/* No ECC. Usage is not recommended ! */ -#define NAND_ECC_NONE 0 -/* Software ECC 3 byte ECC per 256 Byte data */ -#define NAND_ECC_SOFT 1 -/* Hardware ECC 3 byte ECC per 256 Byte data */ -#define NAND_ECC_HW3_256 2 -/* Hardware ECC 3 byte ECC per 512 Byte data */ -#define NAND_ECC_HW3_512 3 -/* Hardware ECC 3 byte ECC per 512 Byte data */ -#define NAND_ECC_HW6_512 4 -/* Hardware ECC 8 byte ECC per 512 Byte data */ -#define NAND_ECC_HW8_512 6 -/* Hardware ECC 12 byte ECC per 2048 Byte data */ -#define NAND_ECC_HW12_2048 7 +typedef enum { + NAND_ECC_NONE, + NAND_ECC_SOFT, + NAND_ECC_HW, + NAND_ECC_HW_SYNDROME, +} nand_ecc_modes_t; /* * Constants for Hardware ECC @@ -227,6 +183,8 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_ #define NAND_SKIP_BBTSCAN 0x00040000 /* Options set by nand scan */ +/* Nand scan has allocated controller struct */ +#define NAND_CONTROLLER_ALLOC 0x20000000 /* Nand scan has allocated oob_buf */ #define NAND_OOBBUF_ALLOC 0x40000000 /* Nand scan has allocated data_buf */ @@ -264,6 +222,31 @@ struct nand_hw_control { }; /** + * struct nand_ecc_ctrl - Control structure for ecc + * @mode: ecc mode + * @steps: number of ecc steps per page + * @size: data bytes per ecc step + * @bytes: ecc bytes per step + * @hwctl: function to control hardware ecc generator. Must only + * be provided if an hardware ECC is available + * @calculate: function for ecc calculation or readback from ecc hardware + * @correct: function for ecc correction, matching to ecc generator (sw/hw) + */ +struct nand_ecc_ctrl { + nand_ecc_modes_t mode; + int steps; + int size; + int bytes; + int (*hwctl)(struct mtd_info *mtd, int mode); + int (*calculate)(struct mtd_info *mtd, + const uint8_t *dat, + uint8_t *ecc_code); + int (*correct)(struct mtd_info *mtd, uint8_t *dat, + uint8_t *read_ecc, + uint8_t *calc_ecc); +}; + +/** * struct nand_chip - NAND Private Flash Chip Data * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device @@ -283,20 +266,12 @@ struct nand_hw_control { * is read from the chip status register * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready - * @calculate_ecc: [REPLACEABLE] function for ecc calculation or readback from ecc hardware - * @correct_data: [REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw) - * @enable_hwecc: [BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only - * be provided if a hardware ECC is available + * @ecc: [BOARDSPECIFIC] ecc control ctructure * @erase_cmd: [INTERN] erase command write function, selectable due to AND support * @scan_bbt: [REPLACEABLE] function to scan bad block table - * @eccmode: [BOARDSPECIFIC] mode of ecc, see defines - * @eccsize: [INTERN] databytes used per ecc-calculation - * @eccbytes: [INTERN] number of ecc bytes per ecc-calculation step - * @eccsteps: [INTERN] number of ecc calculation steps per page * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR) - * @chip_lock: [INTERN] spinlock used to protect access to this structure and the chip * @wq: [INTERN] wait queue to sleep on if a NAND operation is in progress - * @state: [INTERN] the current state of the NAND device + * @state: [INTERN] the current state of the NAND device * @page_shift: [INTERN] number of address bits in a page (column address bits) * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry @@ -317,7 +292,8 @@ struct nand_hw_control { * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup * @bbt_md: [REPLACEABLE] bad block table mirror descriptor * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan - * @controller: [OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices + * @controller: [REPLACEABLE] a pointer to a hardware controller structure + * which is shared among multiple independend devices * @priv: [OPTIONAL] pointer to private chip date * @errstat: [OPTIONAL] hardware specific function to perform additional error status checks * (determine if errors are correctable) @@ -325,44 +301,37 @@ struct nand_hw_control { struct nand_chip { void __iomem *IO_ADDR_R; - void __iomem *IO_ADDR_W; + void __iomem *IO_ADDR_W; - u_char (*read_byte)(struct mtd_info *mtd); - void (*write_byte)(struct mtd_info *mtd, u_char byte); + uint8_t (*read_byte)(struct mtd_info *mtd); + void (*write_byte)(struct mtd_info *mtd, uint8_t byte); u16 (*read_word)(struct mtd_info *mtd); void (*write_word)(struct mtd_info *mtd, u16 word); - void (*write_buf)(struct mtd_info *mtd, const u_char *buf, int len); - void (*read_buf)(struct mtd_info *mtd, u_char *buf, int len); - int (*verify_buf)(struct mtd_info *mtd, const u_char *buf, int len); + void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); + void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); + int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); void (*select_chip)(struct mtd_info *mtd, int chip); int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); - void (*hwcontrol)(struct mtd_info *mtd, int cmd); - int (*dev_ready)(struct mtd_info *mtd); - void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); - int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state); - int (*calculate_ecc)(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code); - int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); - void (*enable_hwecc)(struct mtd_info *mtd, int mode); + void (*hwcontrol)(struct mtd_info *mtd, int cmd); + int (*dev_ready)(struct mtd_info *mtd); + void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); + int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state); void (*erase_cmd)(struct mtd_info *mtd, int page); int (*scan_bbt)(struct mtd_info *mtd); - int eccmode; - int eccsize; - int eccbytes; - int eccsteps; - int chip_delay; - spinlock_t chip_lock; + struct nand_ecc_ctrl ecc; + int chip_delay; wait_queue_head_t wq; - nand_state_t state; - int page_shift; + nand_state_t state; + int page_shift; int phys_erase_shift; int bbt_erase_shift; int chip_shift; - u_char *data_buf; - u_char *oob_buf; + uint8_t *data_buf; + uint8_t *oob_buf; int oobdirty; - u_char *data_poi; + uint8_t *data_poi; unsigned int options; int badblockpos; int numchips; @@ -388,19 +357,19 @@ struct nand_chip { #define NAND_MFR_NATIONAL 0x8f #define NAND_MFR_RENESAS 0x07 #define NAND_MFR_STMICRO 0x20 -#define NAND_MFR_HYNIX 0xad +#define NAND_MFR_HYNIX 0xad /** * struct nand_flash_dev - NAND Flash Device ID Structure * - * @name: Identify the device type - * @id: device ID code - * @pagesize: Pagesize in bytes. Either 256 or 512 or 0 + * @name: Identify the device type + * @id: device ID code + * @pagesize: Pagesize in bytes. Either 256 or 512 or 0 * If the pagesize is 0, then the real pagesize * and the eraseize are determined from the * extended id bytes in the chip - * @erasesize: Size of an erase block in the flash device. - * @chipsize: Total chipsize in Mega Bytes + * @erasesize: Size of an erase block in the flash device. + * @chipsize: Total chipsize in Mega Bytes * @options: Bitfield to store chip relevant options */ struct nand_flash_dev { @@ -415,7 +384,7 @@ struct nand_flash_dev { /** * struct nand_manufacturers - NAND Flash Manufacturer ID Structure * @name: Manufacturer name - * @id: manufacturer ID code of device. + * @id: manufacturer ID code of device. */ struct nand_manufacturers { int id; @@ -455,7 +424,7 @@ struct nand_bbt_descr { int veroffs; uint8_t version[NAND_MAX_CHIPS]; int len; - int maxblocks; + int maxblocks; int reserved_block_code; uint8_t *pattern; }; @@ -500,8 +469,8 @@ extern int nand_default_bbt (struct mtd_info *mtd); extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt); extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt); extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, u_char * buf, u_char * oob_buf, - struct nand_oobinfo *oobsel, int flags); + size_t * retlen, uint8_t * buf, uint8_t * oob_buf, + struct nand_oobinfo *oobsel, int flags); /* * Constants for oob configuration @@ -509,4 +478,51 @@ extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, #define NAND_SMALL_BADBLOCK_POS 5 #define NAND_LARGE_BADBLOCK_POS 0 +/** + * struct platform_nand_chip - chip level device structure + * + * @nr_chips: max. number of chips to scan for + * @chip_offs: chip number offset + * @nr_partitions: number of partitions pointed to be partitoons (or zero) + * @partitions: mtd partition list + * @chip_delay: R/B delay value in us + * @options: Option flags, e.g. 16bit buswidth + * @priv: hardware controller specific settings + */ +struct platform_nand_chip { + int nr_chips; + int chip_offset; + int nr_partitions; + struct mtd_partition *partitions; + int chip_delay; + unsigned int options; + void *priv; +}; + +/** + * struct platform_nand_ctrl - controller level device structure + * + * @hwcontrol: platform specific hardware control structure + * @dev_ready: platform specific function to read ready/busy pin + * @select_chip: platform specific chip select function + * @priv_data: private data to transport driver specific settings + * + * All fields are optional and depend on the hardware driver requirements + */ +struct platform_nand_ctrl { + void (*hwcontrol)(struct mtd_info *mtd, int cmd); + int (*dev_ready)(struct mtd_info *mtd); + void (*select_chip)(struct mtd_info *mtd, int chip); + void *priv; +}; + +/* Some helpers to access the data structures */ +static inline +struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + + return chip->priv; +} + #endif /* __LINUX_MTD_NAND_H */ diff --git a/include/linux/mtd/ndfc.h b/include/linux/mtd/ndfc.h new file mode 100644 index 0000000..31d61f0 --- /dev/null +++ b/include/linux/mtd/ndfc.h @@ -0,0 +1,66 @@ +/* + * linux/include/linux/mtd/ndfc.h + * + * Copyright (c) 2006 Thomas Gleixner <tglx@linutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Info: + * Contains defines, datastructures for ndfc nand controller + * + */ +#ifndef __LINUX_MTD_NDFC_H +#define __LINUX_MTD_NDFC_H + +/* NDFC Register definitions */ +#define NDFC_CMD 0x00 +#define NDFC_ALE 0x04 +#define NDFC_DATA 0x08 +#define NDFC_ECC 0x10 +#define NDFC_BCFG0 0x30 +#define NDFC_BCFG1 0x34 +#define NDFC_BCFG2 0x38 +#define NDFC_BCFG3 0x3c +#define NDFC_CCR 0x40 +#define NDFC_STAT 0x44 +#define NDFC_HWCTL 0x48 +#define NDFC_REVID 0x50 + +#define NDFC_STAT_IS_READY 0x01000000 + +#define NDFC_CCR_RESET_CE 0x80000000 /* CE Reset */ +#define NDFC_CCR_RESET_ECC 0x40000000 /* ECC Reset */ +#define NDFC_CCR_RIE 0x20000000 /* Interrupt Enable on Device Rdy */ +#define NDFC_CCR_REN 0x10000000 /* Enable wait for Rdy in LinearR */ +#define NDFC_CCR_ROMEN 0x08000000 /* Enable ROM In LinearR */ +#define NDFC_CCR_ARE 0x04000000 /* Auto-Read Enable */ +#define NDFC_CCR_BS(x) (((x) & 0x3) << 24) /* Select Bank on CE[x] */ +#define NDFC_CCR_BS_MASK 0x03000000 /* Select Bank */ +#define NDFC_CCR_ARAC0 0x00000000 /* 3 Addr, 1 Col 2 Row 512b page */ +#define NDFC_CCR_ARAC1 0x00001000 /* 4 Addr, 1 Col 3 Row 512b page */ +#define NDFC_CCR_ARAC2 0x00002000 /* 4 Addr, 2 Col 2 Row 2K page */ +#define NDFC_CCR_ARAC3 0x00003000 /* 5 Addr, 2 Col 3 Row 2K page */ +#define NDFC_CCR_ARAC_MASK 0x00003000 /* Auto-Read mode Addr Cycles */ +#define NDFC_CCR_RPG 0x0000C000 /* Auto-Read Page */ +#define NDFC_CCR_EBCC 0x00000004 /* EBC Configuration Completed */ +#define NDFC_CCR_DHC 0x00000002 /* Direct Hardware Control Enable */ + +#define NDFC_BxCFG_EN 0x80000000 /* Bank Enable */ +#define NDFC_BxCFG_CED 0x40000000 /* nCE Style */ +#define NDFC_BxCFG_SZ_MASK 0x08000000 /* Bank Size */ +#define NDFC_BxCFG_SZ_8BIT 0x00000000 /* 8bit */ +#define NDFC_BxCFG_SZ_16BIT 0x08000000 /* 16bit */ + +#define NDFC_MAX_BANKS 4 + +struct ndfc_controller_settings { + uint32_t ccr_settings; +}; + +struct ndfc_chip_settings { + uint32_t bank_settings; +}; + +#endif |