diff options
Diffstat (limited to 'lib')
| -rw-r--r-- | lib/Kconfig.debug | 74 | ||||
| -rw-r--r-- | lib/Makefile | 3 | ||||
| -rw-r--r-- | lib/bitmap.c | 109 | ||||
| -rw-r--r-- | lib/bsearch.c | 53 | ||||
| -rw-r--r-- | lib/dma-debug.c | 18 | ||||
| -rw-r--r-- | lib/flex_array.c | 48 | ||||
| -rw-r--r-- | lib/genalloc.c | 45 | ||||
| -rw-r--r-- | lib/kstrtox.c | 26 | ||||
| -rw-r--r-- | lib/lru_cache.c | 2 | ||||
| -rw-r--r-- | lib/show_mem.c | 2 | ||||
| -rw-r--r-- | lib/string.c | 29 | ||||
| -rw-r--r-- | lib/vsprintf.c | 13 | ||||
| -rw-r--r-- | lib/xz/xz_dec_lzma2.c | 6 |
13 files changed, 346 insertions, 82 deletions
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index c768bcd..28afa4c 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -7,7 +7,8 @@ config PRINTK_TIME included in printk output. This allows you to measure the interval between kernel operations, including bootup operations. This is useful for identifying long delays - in kernel startup. + in kernel startup. Or add printk.time=1 at boot-time. + See Documentation/kernel-parameters.txt config DEFAULT_MESSAGE_LOGLEVEL int "Default message log level (1-7)" @@ -238,6 +239,21 @@ config DETECT_HUNG_TASK enabled then all held locks will also be reported. This feature has negligible overhead. +config DEFAULT_HUNG_TASK_TIMEOUT + int "Default timeout for hung task detection (in seconds)" + depends on DETECT_HUNG_TASK + default 120 + help + This option controls the default timeout (in seconds) used + to determine when a task has become non-responsive and should + be considered hung. + + It can be adjusted at runtime via the kernel.hung_task_timeout + sysctl or by writing a value to /proc/sys/kernel/hung_task_timeout. + + A timeout of 0 disables the check. The default is two minutes. + Keeping the default should be fine in most cases. + config BOOTPARAM_HUNG_TASK_PANIC bool "Panic (Reboot) On Hung Tasks" depends on DETECT_HUNG_TASK @@ -337,7 +353,7 @@ config DEBUG_OBJECTS_WORK config DEBUG_OBJECTS_RCU_HEAD bool "Debug RCU callbacks objects" - depends on DEBUG_OBJECTS && PREEMPT + depends on DEBUG_OBJECTS help Enable this to turn on debugging of RCU list heads (call_rcu() usage). @@ -398,9 +414,9 @@ config SLUB_STATS config DEBUG_KMEMLEAK bool "Kernel memory leak detector" depends on DEBUG_KERNEL && EXPERIMENTAL && !MEMORY_HOTPLUG && \ - (X86 || ARM || PPC || S390 || SPARC64 || SUPERH || MICROBLAZE || TILE) + (X86 || ARM || PPC || MIPS || S390 || SPARC64 || SUPERH || MICROBLAZE || TILE) - select DEBUG_FS if SYSFS + select DEBUG_FS select STACKTRACE if STACKTRACE_SUPPORT select KALLSYMS select CRC32 @@ -654,6 +670,15 @@ config STACKTRACE bool depends on STACKTRACE_SUPPORT +config DEBUG_STACK_USAGE + bool "Stack utilization instrumentation" + depends on DEBUG_KERNEL + help + Enables the display of the minimum amount of free stack which each + task has ever had available in the sysrq-T and sysrq-P debug output. + + This option will slow down process creation somewhat. + config DEBUG_KOBJECT bool "kobject debugging" depends on DEBUG_KERNEL @@ -875,22 +900,9 @@ config RCU_TORTURE_TEST_RUNNABLE Say N here if you want the RCU torture tests to start only after being manually enabled via /proc. -config RCU_CPU_STALL_DETECTOR - bool "Check for stalled CPUs delaying RCU grace periods" - depends on TREE_RCU || TREE_PREEMPT_RCU - default y - help - This option causes RCU to printk information on which - CPUs are delaying the current grace period, but only when - the grace period extends for excessive time periods. - - Say N if you want to disable such checks. - - Say Y if you are unsure. - config RCU_CPU_STALL_TIMEOUT int "RCU CPU stall timeout in seconds" - depends on RCU_CPU_STALL_DETECTOR + depends on TREE_RCU || TREE_PREEMPT_RCU range 3 300 default 60 help @@ -899,22 +911,9 @@ config RCU_CPU_STALL_TIMEOUT RCU grace period persists, additional CPU stall warnings are printed at more widely spaced intervals. -config RCU_CPU_STALL_DETECTOR_RUNNABLE - bool "RCU CPU stall checking starts automatically at boot" - depends on RCU_CPU_STALL_DETECTOR - default y - help - If set, start checking for RCU CPU stalls immediately on - boot. Otherwise, RCU CPU stall checking must be manually - enabled. - - Say Y if you are unsure. - - Say N if you wish to suppress RCU CPU stall checking during boot. - config RCU_CPU_STALL_VERBOSE bool "Print additional per-task information for RCU_CPU_STALL_DETECTOR" - depends on RCU_CPU_STALL_DETECTOR && TREE_PREEMPT_RCU + depends on TREE_PREEMPT_RCU default y help This option causes RCU to printk detailed per-task information @@ -993,6 +992,17 @@ config DEBUG_FORCE_WEAK_PER_CPU To ensure that generic code follows the above rules, this option forces all percpu variables to be defined as weak. +config DEBUG_PER_CPU_MAPS + bool "Debug access to per_cpu maps" + depends on DEBUG_KERNEL + depends on SMP + help + Say Y to verify that the per_cpu map being accessed has + been set up. This adds a fair amount of code to kernel memory + and decreases performance. + + Say N if unsure. + config LKDTM tristate "Linux Kernel Dump Test Tool Module" depends on DEBUG_FS diff --git a/lib/Makefile b/lib/Makefile index ef0f285..4b49a24 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -21,7 +21,8 @@ lib-y += kobject.o kref.o klist.o obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \ bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \ - string_helpers.o gcd.o lcm.o list_sort.o uuid.o flex_array.o + string_helpers.o gcd.o lcm.o list_sort.o uuid.o flex_array.o \ + bsearch.o obj-y += kstrtox.o obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o diff --git a/lib/bitmap.c b/lib/bitmap.c index 91e0ccf..41baf02 100644 --- a/lib/bitmap.c +++ b/lib/bitmap.c @@ -571,8 +571,11 @@ int bitmap_scnlistprintf(char *buf, unsigned int buflen, EXPORT_SYMBOL(bitmap_scnlistprintf); /** - * bitmap_parselist - convert list format ASCII string to bitmap + * __bitmap_parselist - convert list format ASCII string to bitmap * @bp: read nul-terminated user string from this buffer + * @buflen: buffer size in bytes. If string is smaller than this + * then it must be terminated with a \0. + * @is_user: location of buffer, 0 indicates kernel space * @maskp: write resulting mask here * @nmaskbits: number of bits in mask to be written * @@ -587,20 +590,63 @@ EXPORT_SYMBOL(bitmap_scnlistprintf); * %-EINVAL: invalid character in string * %-ERANGE: bit number specified too large for mask */ -int bitmap_parselist(const char *bp, unsigned long *maskp, int nmaskbits) +static int __bitmap_parselist(const char *buf, unsigned int buflen, + int is_user, unsigned long *maskp, + int nmaskbits) { unsigned a, b; + int c, old_c, totaldigits; + const char __user *ubuf = buf; + int exp_digit, in_range; + totaldigits = c = 0; bitmap_zero(maskp, nmaskbits); do { - if (!isdigit(*bp)) - return -EINVAL; - b = a = simple_strtoul(bp, (char **)&bp, BASEDEC); - if (*bp == '-') { - bp++; - if (!isdigit(*bp)) + exp_digit = 1; + in_range = 0; + a = b = 0; + + /* Get the next cpu# or a range of cpu#'s */ + while (buflen) { + old_c = c; + if (is_user) { + if (__get_user(c, ubuf++)) + return -EFAULT; + } else + c = *buf++; + buflen--; + if (isspace(c)) + continue; + + /* + * If the last character was a space and the current + * character isn't '\0', we've got embedded whitespace. + * This is a no-no, so throw an error. + */ + if (totaldigits && c && isspace(old_c)) + return -EINVAL; + + /* A '\0' or a ',' signal the end of a cpu# or range */ + if (c == '\0' || c == ',') + break; + + if (c == '-') { + if (exp_digit || in_range) + return -EINVAL; + b = 0; + in_range = 1; + exp_digit = 1; + continue; + } + + if (!isdigit(c)) return -EINVAL; - b = simple_strtoul(bp, (char **)&bp, BASEDEC); + + b = b * 10 + (c - '0'); + if (!in_range) + a = b; + exp_digit = 0; + totaldigits++; } if (!(a <= b)) return -EINVAL; @@ -610,13 +656,52 @@ int bitmap_parselist(const char *bp, unsigned long *maskp, int nmaskbits) set_bit(a, maskp); a++; } - if (*bp == ',') - bp++; - } while (*bp != '\0' && *bp != '\n'); + } while (buflen && c == ','); return 0; } + +int bitmap_parselist(const char *bp, unsigned long *maskp, int nmaskbits) +{ + char *nl = strchr(bp, '\n'); + int len; + + if (nl) + len = nl - bp; + else + len = strlen(bp); + + return __bitmap_parselist(bp, len, 0, maskp, nmaskbits); +} EXPORT_SYMBOL(bitmap_parselist); + +/** + * bitmap_parselist_user() + * + * @ubuf: pointer to user buffer containing string. + * @ulen: buffer size in bytes. If string is smaller than this + * then it must be terminated with a \0. + * @maskp: pointer to bitmap array that will contain result. + * @nmaskbits: size of bitmap, in bits. + * + * Wrapper for bitmap_parselist(), providing it with user buffer. + * + * We cannot have this as an inline function in bitmap.h because it needs + * linux/uaccess.h to get the access_ok() declaration and this causes + * cyclic dependencies. + */ +int bitmap_parselist_user(const char __user *ubuf, + unsigned int ulen, unsigned long *maskp, + int nmaskbits) +{ + if (!access_ok(VERIFY_READ, ubuf, ulen)) + return -EFAULT; + return __bitmap_parselist((const char *)ubuf, + ulen, 1, maskp, nmaskbits); +} +EXPORT_SYMBOL(bitmap_parselist_user); + + /** * bitmap_pos_to_ord - find ordinal of set bit at given position in bitmap * @buf: pointer to a bitmap diff --git a/lib/bsearch.c b/lib/bsearch.c new file mode 100644 index 0000000..5b54758 --- /dev/null +++ b/lib/bsearch.c @@ -0,0 +1,53 @@ +/* + * A generic implementation of binary search for the Linux kernel + * + * Copyright (C) 2008-2009 Ksplice, Inc. + * Author: Tim Abbott <tabbott@ksplice.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2. + */ + +#include <linux/module.h> +#include <linux/bsearch.h> + +/* + * bsearch - binary search an array of elements + * @key: pointer to item being searched for + * @base: pointer to first element to search + * @num: number of elements + * @size: size of each element + * @cmp: pointer to comparison function + * + * This function does a binary search on the given array. The + * contents of the array should already be in ascending sorted order + * under the provided comparison function. + * + * Note that the key need not have the same type as the elements in + * the array, e.g. key could be a string and the comparison function + * could compare the string with the struct's name field. However, if + * the key and elements in the array are of the same type, you can use + * the same comparison function for both sort() and bsearch(). + */ +void *bsearch(const void *key, const void *base, size_t num, size_t size, + int (*cmp)(const void *key, const void *elt)) +{ + size_t start = 0, end = num; + int result; + + while (start < end) { + size_t mid = start + (end - start) / 2; + + result = cmp(key, base + mid * size); + if (result < 0) + end = mid; + else if (result > 0) + start = mid + 1; + else + return (void *)base + mid * size; + } + + return NULL; +} +EXPORT_SYMBOL(bsearch); diff --git a/lib/dma-debug.c b/lib/dma-debug.c index 4bfb047..db07bfd 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -649,7 +649,7 @@ out_err: return -ENOMEM; } -static int device_dma_allocations(struct device *dev) +static int device_dma_allocations(struct device *dev, struct dma_debug_entry **out_entry) { struct dma_debug_entry *entry; unsigned long flags; @@ -660,8 +660,10 @@ static int device_dma_allocations(struct device *dev) for (i = 0; i < HASH_SIZE; ++i) { spin_lock(&dma_entry_hash[i].lock); list_for_each_entry(entry, &dma_entry_hash[i].list, list) { - if (entry->dev == dev) + if (entry->dev == dev) { count += 1; + *out_entry = entry; + } } spin_unlock(&dma_entry_hash[i].lock); } @@ -674,6 +676,7 @@ static int device_dma_allocations(struct device *dev) static int dma_debug_device_change(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; + struct dma_debug_entry *uninitialized_var(entry); int count; if (global_disable) @@ -681,12 +684,17 @@ static int dma_debug_device_change(struct notifier_block *nb, unsigned long acti switch (action) { case BUS_NOTIFY_UNBOUND_DRIVER: - count = device_dma_allocations(dev); + count = device_dma_allocations(dev, &entry); if (count == 0) break; - err_printk(dev, NULL, "DMA-API: device driver has pending " + err_printk(dev, entry, "DMA-API: device driver has pending " "DMA allocations while released from device " - "[count=%d]\n", count); + "[count=%d]\n" + "One of leaked entries details: " + "[device address=0x%016llx] [size=%llu bytes] " + "[mapped with %s] [mapped as %s]\n", + count, entry->dev_addr, entry->size, + dir2name[entry->direction], type2name[entry->type]); break; default: break; diff --git a/lib/flex_array.c b/lib/flex_array.c index c0ea40b..cab7621 100644 --- a/lib/flex_array.c +++ b/lib/flex_array.c @@ -88,8 +88,11 @@ struct flex_array *flex_array_alloc(int element_size, unsigned int total, gfp_t flags) { struct flex_array *ret; - int max_size = FLEX_ARRAY_NR_BASE_PTRS * - FLEX_ARRAY_ELEMENTS_PER_PART(element_size); + int max_size = 0; + + if (element_size) + max_size = FLEX_ARRAY_NR_BASE_PTRS * + FLEX_ARRAY_ELEMENTS_PER_PART(element_size); /* max_size will end up 0 if element_size > PAGE_SIZE */ if (total > max_size) @@ -183,15 +186,18 @@ __fa_get_part(struct flex_array *fa, int part_nr, gfp_t flags) int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src, gfp_t flags) { - int part_nr = fa_element_to_part_nr(fa, element_nr); + int part_nr; struct flex_array_part *part; void *dst; if (element_nr >= fa->total_nr_elements) return -ENOSPC; + if (!fa->element_size) + return 0; if (elements_fit_in_base(fa)) part = (struct flex_array_part *)&fa->parts[0]; else { + part_nr = fa_element_to_part_nr(fa, element_nr); part = __fa_get_part(fa, part_nr, flags); if (!part) return -ENOMEM; @@ -211,15 +217,18 @@ EXPORT_SYMBOL(flex_array_put); */ int flex_array_clear(struct flex_array *fa, unsigned int element_nr) { - int part_nr = fa_element_to_part_nr(fa, element_nr); + int part_nr; struct flex_array_part *part; void *dst; if (element_nr >= fa->total_nr_elements) return -ENOSPC; + if (!fa->element_size) + return 0; if (elements_fit_in_base(fa)) part = (struct flex_array_part *)&fa->parts[0]; else { + part_nr = fa_element_to_part_nr(fa, element_nr); part = fa->parts[part_nr]; if (!part) return -EINVAL; @@ -232,10 +241,10 @@ EXPORT_SYMBOL(flex_array_clear); /** * flex_array_prealloc - guarantee that array space exists - * @fa: the flex array for which to preallocate parts - * @start: index of first array element for which space is allocated - * @end: index of last (inclusive) element for which space is allocated - * @flags: page allocation flags + * @fa: the flex array for which to preallocate parts + * @start: index of first array element for which space is allocated + * @nr_elements: number of elements for which space is allocated + * @flags: page allocation flags * * This will guarantee that no future calls to flex_array_put() * will allocate memory. It can be used if you are expecting to @@ -245,15 +254,27 @@ EXPORT_SYMBOL(flex_array_clear); * Locking must be provided by the caller. */ int flex_array_prealloc(struct flex_array *fa, unsigned int start, - unsigned int end, gfp_t flags) + unsigned int nr_elements, gfp_t flags) { int start_part; int end_part; int part_nr; + unsigned int end; struct flex_array_part *part; - if (start >= fa->total_nr_elements || end >= fa->total_nr_elements) + if (!start && !nr_elements) + return 0; + if (start >= fa->total_nr_elements) + return -ENOSPC; + if (!nr_elements) + return 0; + + end = start + nr_elements - 1; + + if (end >= fa->total_nr_elements) return -ENOSPC; + if (!fa->element_size) + return 0; if (elements_fit_in_base(fa)) return 0; start_part = fa_element_to_part_nr(fa, start); @@ -281,14 +302,17 @@ EXPORT_SYMBOL(flex_array_prealloc); */ void *flex_array_get(struct flex_array *fa, unsigned int element_nr) { - int part_nr = fa_element_to_part_nr(fa, element_nr); + int part_nr; struct flex_array_part *part; + if (!fa->element_size) + return NULL; if (element_nr >= fa->total_nr_elements) return NULL; if (elements_fit_in_base(fa)) part = (struct flex_array_part *)&fa->parts[0]; else { + part_nr = fa_element_to_part_nr(fa, element_nr); part = fa->parts[part_nr]; if (!part) return NULL; @@ -343,6 +367,8 @@ int flex_array_shrink(struct flex_array *fa) int part_nr; int ret = 0; + if (!fa->total_nr_elements || !fa->element_size) + return 0; if (elements_fit_in_base(fa)) return ret; for (part_nr = 0; part_nr < FLEX_ARRAY_NR_BASE_PTRS; part_nr++) { diff --git a/lib/genalloc.c b/lib/genalloc.c index 1923f14..577ddf8 100644 --- a/lib/genalloc.c +++ b/lib/genalloc.c @@ -39,17 +39,20 @@ struct gen_pool *gen_pool_create(int min_alloc_order, int nid) EXPORT_SYMBOL(gen_pool_create); /** - * gen_pool_add - add a new chunk of special memory to the pool + * gen_pool_add_virt - add a new chunk of special memory to the pool * @pool: pool to add new memory chunk to - * @addr: starting address of memory chunk to add to pool + * @virt: virtual starting address of memory chunk to add to pool + * @phys: physical starting address of memory chunk to add to pool * @size: size in bytes of the memory chunk to add to pool * @nid: node id of the node the chunk structure and bitmap should be * allocated on, or -1 * * Add a new chunk of special memory to the specified pool. + * + * Returns 0 on success or a -ve errno on failure. */ -int gen_pool_add(struct gen_pool *pool, unsigned long addr, size_t size, - int nid) +int gen_pool_add_virt(struct gen_pool *pool, unsigned long virt, phys_addr_t phys, + size_t size, int nid) { struct gen_pool_chunk *chunk; int nbits = size >> pool->min_alloc_order; @@ -58,11 +61,12 @@ int gen_pool_add(struct gen_pool *pool, unsigned long addr, size_t size, chunk = kmalloc_node(nbytes, GFP_KERNEL | __GFP_ZERO, nid); if (unlikely(chunk == NULL)) - return -1; + return -ENOMEM; spin_lock_init(&chunk->lock); - chunk->start_addr = addr; - chunk->end_addr = addr + size; + chunk->phys_addr = phys; + chunk->start_addr = virt; + chunk->end_addr = virt + size; write_lock(&pool->lock); list_add(&chunk->next_chunk, &pool->chunks); @@ -70,7 +74,32 @@ int gen_pool_add(struct gen_pool *pool, unsigned long addr, size_t size, return 0; } -EXPORT_SYMBOL(gen_pool_add); +EXPORT_SYMBOL(gen_pool_add_virt); + +/** + * gen_pool_virt_to_phys - return the physical address of memory + * @pool: pool to allocate from + * @addr: starting address of memory + * + * Returns the physical address on success, or -1 on error. + */ +phys_addr_t gen_pool_virt_to_phys(struct gen_pool *pool, unsigned long addr) +{ + struct list_head *_chunk; + struct gen_pool_chunk *chunk; + + read_lock(&pool->lock); + list_for_each(_chunk, &pool->chunks) { + chunk = list_entry(_chunk, struct gen_pool_chunk, next_chunk); + + if (addr >= chunk->start_addr && addr < chunk->end_addr) + return chunk->phys_addr + addr - chunk->start_addr; + } + read_unlock(&pool->lock); + + return -1; +} +EXPORT_SYMBOL(gen_pool_virt_to_phys); /** * gen_pool_destroy - destroy a special memory pool diff --git a/lib/kstrtox.c b/lib/kstrtox.c index a235f3c..2dbae88 100644 --- a/lib/kstrtox.c +++ b/lib/kstrtox.c @@ -17,6 +17,7 @@ #include <linux/math64.h> #include <linux/module.h> #include <linux/types.h> +#include <asm/uaccess.h> static inline char _tolower(const char c) { @@ -222,3 +223,28 @@ int kstrtos8(const char *s, unsigned int base, s8 *res) return 0; } EXPORT_SYMBOL(kstrtos8); + +#define kstrto_from_user(f, g, type) \ +int f(const char __user *s, size_t count, unsigned int base, type *res) \ +{ \ + /* sign, base 2 representation, newline, terminator */ \ + char buf[1 + sizeof(type) * 8 + 1 + 1]; \ + \ + count = min(count, sizeof(buf) - 1); \ + if (copy_from_user(buf, s, count)) \ + return -EFAULT; \ + buf[count] = '\0'; \ + return g(buf, base, res); \ +} \ +EXPORT_SYMBOL(f) + +kstrto_from_user(kstrtoull_from_user, kstrtoull, unsigned long long); +kstrto_from_user(kstrtoll_from_user, kstrtoll, long long); +kstrto_from_user(kstrtoul_from_user, kstrtoul, unsigned long); +kstrto_from_user(kstrtol_from_user, kstrtol, long); +kstrto_from_user(kstrtouint_from_user, kstrtouint, unsigned int); +kstrto_from_user(kstrtoint_from_user, kstrtoint, int); +kstrto_from_user(kstrtou16_from_user, kstrtou16, u16); +kstrto_from_user(kstrtos16_from_user, kstrtos16, s16); +kstrto_from_user(kstrtou8_from_user, kstrtou8, u8); +kstrto_from_user(kstrtos8_from_user, kstrtos8, s8); diff --git a/lib/lru_cache.c b/lib/lru_cache.c index 270de9d..a07e726 100644 --- a/lib/lru_cache.c +++ b/lib/lru_cache.c @@ -84,7 +84,7 @@ struct lru_cache *lc_create(const char *name, struct kmem_cache *cache, if (e_count > LC_MAX_ACTIVE) return NULL; - slot = kzalloc(e_count * sizeof(struct hlist_head*), GFP_KERNEL); + slot = kcalloc(e_count, sizeof(struct hlist_head), GFP_KERNEL); if (!slot) goto out_fail; element = kzalloc(e_count * sizeof(struct lc_element *), GFP_KERNEL); diff --git a/lib/show_mem.c b/lib/show_mem.c index 90cbe4b..4407f8c 100644 --- a/lib/show_mem.c +++ b/lib/show_mem.c @@ -16,7 +16,7 @@ void show_mem(unsigned int filter) nonshared = 0, highmem = 0; printk("Mem-Info:\n"); - __show_free_areas(filter); + show_free_areas(filter); for_each_online_pgdat(pgdat) { unsigned long i, flags; diff --git a/lib/string.c b/lib/string.c index f71bead..01fad9b 100644 --- a/lib/string.c +++ b/lib/string.c @@ -535,6 +535,35 @@ bool sysfs_streq(const char *s1, const char *s2) } EXPORT_SYMBOL(sysfs_streq); +/** + * strtobool - convert common user inputs into boolean values + * @s: input string + * @res: result + * + * This routine returns 0 iff the first character is one of 'Yy1Nn0'. + * Otherwise it will return -EINVAL. Value pointed to by res is + * updated upon finding a match. + */ +int strtobool(const char *s, bool *res) +{ + switch (s[0]) { + case 'y': + case 'Y': + case '1': + *res = true; + break; + case 'n': + case 'N': + case '0': + *res = false; + break; + default: + return -EINVAL; + } + return 0; +} +EXPORT_SYMBOL(strtobool); + #ifndef __HAVE_ARCH_MEMSET /** * memset - Fill a region of memory with the given value diff --git a/lib/vsprintf.c b/lib/vsprintf.c index bc0ac6b..c112056 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -797,7 +797,7 @@ char *uuid_string(char *buf, char *end, const u8 *addr, return string(buf, end, uuid, spec); } -int kptr_restrict = 1; +int kptr_restrict __read_mostly; /* * Show a '%p' thing. A kernel extension is that the '%p' is followed @@ -898,7 +898,7 @@ char *pointer(const char *fmt, char *buf, char *end, void *ptr, case 'U': return uuid_string(buf, end, ptr, spec, fmt); case 'V': - return buf + vsnprintf(buf, end - buf, + return buf + vsnprintf(buf, end > buf ? end - buf : 0, ((struct va_format *)ptr)->fmt, *(((struct va_format *)ptr)->va)); case 'K': @@ -1161,8 +1161,7 @@ qualifier: * return is greater than or equal to @size, the resulting * string is truncated. * - * Call this function if you are already dealing with a va_list. - * You probably want snprintf() instead. + * If you're not already dealing with a va_list consider using snprintf(). */ int vsnprintf(char *buf, size_t size, const char *fmt, va_list args) { @@ -1336,8 +1335,7 @@ EXPORT_SYMBOL(vsnprintf); * the @buf not including the trailing '\0'. If @size is == 0 the function * returns 0. * - * Call this function if you are already dealing with a va_list. - * You probably want scnprintf() instead. + * If you're not already dealing with a va_list consider using scnprintf(). * * See the vsnprintf() documentation for format string extensions over C99. */ @@ -1416,8 +1414,7 @@ EXPORT_SYMBOL(scnprintf); * into @buf. Use vsnprintf() or vscnprintf() in order to avoid * buffer overflows. * - * Call this function if you are already dealing with a va_list. - * You probably want sprintf() instead. + * If you're not already dealing with a va_list consider using sprintf(). * * See the vsnprintf() documentation for format string extensions over C99. */ diff --git a/lib/xz/xz_dec_lzma2.c b/lib/xz/xz_dec_lzma2.c index ea5fa4f..a6cdc96 100644 --- a/lib/xz/xz_dec_lzma2.c +++ b/lib/xz/xz_dec_lzma2.c @@ -969,6 +969,9 @@ XZ_EXTERN enum xz_ret xz_dec_lzma2_run(struct xz_dec_lzma2 *s, */ tmp = b->in[b->in_pos++]; + if (tmp == 0x00) + return XZ_STREAM_END; + if (tmp >= 0xE0 || tmp == 0x01) { s->lzma2.need_props = true; s->lzma2.need_dict_reset = false; @@ -1001,9 +1004,6 @@ XZ_EXTERN enum xz_ret xz_dec_lzma2_run(struct xz_dec_lzma2 *s, lzma_reset(s); } } else { - if (tmp == 0x00) - return XZ_STREAM_END; - if (tmp > 0x02) return XZ_DATA_ERROR; |