aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* [SCSI] qla2xxx: Properly handle UNDERRUN completion statuses.Lalit Chandivade2009-12-041-63/+57
| | | | | | | | | | | | | | | Correct issues where the lower scsi-status would be improperly cleared, instead, allow the midlayer to process the status after the proper residual-count checks are performed. Finally, validate firmware status flags prior to assigning values from the FCP_RSP frame. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Michael Hernandez <michael.hernandez@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Properly re-register FC4/FDMI after physical and logical ↵Andrew Vasquez2009-12-043-6/+8
| | | | | | | | | | | | | link disruptions. Original code would not register FC4 nor FDMI information after a logical tear-down of an VFC link. Code now triggers registration date during processing of a 'Report ID Acquisition IOCB', which is submitted after a FLOGI or FDISC completes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Properly check FCP_RSP response-info field after TMF completion.Andrew Vasquez2009-12-041-4/+22
| | | | | | | | | | Original code discarded response-info field information and assumed the command completed successfully without verifying the target's status within the FCP_RSP packet. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Retrieve firmware's maximum number of supported FCFs.Andrew Vasquez2009-12-043-6/+11
| | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Set the size of the host buffer used to fetch DCBX and XGMAC ↵Giridhar Malavali2009-12-041-2/+2
| | | | | | | parameters to 4K. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Reread firmware versions information after an ISP abort.Lalit Chandivade2009-12-041-0/+9
| | | | | | | | | | | | In some case, the MPI and PHY versions when retrieved after the Execute-FW mailbox-command are incorrect (255.255.255.255). Instead, query the information after the check for firmware ready is done in the abort ISP path. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Display additional mailbox registers during AEN handling.Andrew Vasquez2009-12-041-9/+15
| | | | | | | | The mailbox register values may assist in debugging efforts. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Add firmware-dump kobject uevent notification.Andrew Vasquez2009-12-045-55/+72
| | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] bfa: fixed checkpatch errors for bfad filesJing Huang2009-12-0453-539/+324
| | | | | | | This patch fixes checkpatch errors/warnings in bfad files. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] scsi_transport_fc: remove invalid BUG_ONMichael Reed2009-10-291-26/+42
| | | | | | | | | | | | | | | | | | | I was doing some large lun count testing with 2.6.31 and hit a BUG_ON() in fc_timeout_deleted_rport(), and it seems like it should have been just a matter of time before someone did. It seems invalid to set port_state under lock, then expect it to remain set after releasing the lock. Another thread called fc_remote_port_add() when the lock was released, changing the port_state. This patch removes the BUG_ON and moves the test of the port_state to inside the host_lock. It's been running for several weeks now with no ill effect. Signed-off-by: Michael Reed <mdr@sgi.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] fix propogation of integrity errorsMike Christie2009-10-291-1/+1
| | | | | | | | | | | | | | | | | When the Integrity check is done in scsi_io_completion it will set error to -EILSEQ. However, at this point error is no longer used, and blk_end_request_err has -EIO hardcoded. It looks like there was just porting mistake with this patch http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=3e695f89c5debb735e4ff051e9e58d8fb4e95110 and we meant to send error upwards, so this patch changes the hard coded EIO to the error variable. I have only boot tested this patch. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] stex: update version to 4.6.0000.4Ed Lin2009-10-291-4/+4
| | | | | | | Update version to 4.6.0000.4. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] stex: add support for reset request from firmwareEd Lin2009-10-291-83/+166
| | | | | | | | | Add support for reset request from firmware for controllers of st_shasta and st_yel type. Code adjustments necessary for this change are also included. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] stex: add small dma buffer supportEd Lin2009-10-291-5/+20
| | | | | | | | | The controllers of st_seq and st_vsc type can work if only small dma buffer is available, with a reduced firmware feature set. Add support for this case. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mptfusion: Bump version to 3.04.13Kashyap, Desai2009-10-291-2/+2
| | | | | | | Bump version 3.04.13. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mptspi: Fix for incorrect data underrun errataKashyap, Desai2009-10-291-5/+81
| | | | | | | | | | | | | | | | | | | Errata: Certain conditions on the scsi bus may casue the 53C1030 to incorrectly signal a SCSI_DATA_UNDERRUN to the host. Workaround 1: For an Errata on LSI53C1030 When the length of request data and transfer data are different with result of command (READ or VERIFY), DID_SOFT_ERROR is set. Workaround 2: For potential trouble on LSI53C1030. It is checked whether the length of request data is equal to the length of transfer and residual. MEDIUM_ERROR is set by incorrect data. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mptctl : Remove printk which floods unnecessary messages to ↵Kashyap, Desai2009-10-291-4/+1
| | | | | | | var/log/message Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] megaraid_sas: Update version number and documentationYang, Bo2009-10-293-4/+66
| | | | | Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] megaraid_sas: use the firmware boot timeout when waiting for commandsYang, Bo2009-10-291-11/+17
| | | | | | | | use the constant MEGASAS_RESET_WAIT_TIME when waiting for firmware commands to complete (currently 3 minutes). Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] megaraid_sas: fix 64 bit sense pointer truncationYang, Bo2009-10-291-4/+4
| | | | | | | | | The current sense pointer is cast to a u32 pointer, which can truncate on 64 bits. Fix by using unsigned long instead. Signed-off-by Bo Yang<bo.yang@lsi.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] megaraid_sas: Add the support for updating the OS after ↵Yang, Bo2009-10-292-1/+141
| | | | | | | | | | | | | | | | adding/removing the devices from FW Driver will update the OS devices after adding and deleting the device from FW. When driver receive add or delete AEN from FW, driver will send the DCMD cmd to get the System PD list from FW. Then driver will check if this device already in the OS: If add event and OS don't have the device (but it is in the list), driver add the device to OS, otherwise driver will not add. If remove event, driver will check the list, if is not in the list, but OS have the device, driver will remove the device. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] megaraid_sas: Fix the fix for fw hang caused by megaraid sas applicationYang, Bo2009-10-292-23/+77
| | | | | | | | | | | Add a lock to the skinny firmware initialisation sequence to prevent the two stage write being non atomic if multiple instances use it. Add a flag to the driver shutdown sequence to prevent aen ioctls being called after shutdown begins. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] megaraid_sas: add the IEEE SGE support to SAS2 controllerYang, Bo2009-10-292-7/+82
| | | | | | | | To increase the performance, megaraid sas driver added the IEEE SGE support to support SAS2 controller. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] megaraid_sas: allocate the application cmds to sas2 controllerYang, Bo2009-10-292-3/+22
| | | | | | | | MegaRAID SAS2 controller ioctl can't use 32 cmd for applications. Driver need to divide different number of cmds to IO and application. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] megaraid_sas: report system PDs to OSYang, Bo2009-10-291-26/+65
| | | | | | | When OS issue inquiry, it will check driver's internal pd_list. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] megaraid_sas: infrastructure to get PDs from FWYang, Bo2009-10-292-2/+182
| | | | | | | | Add system PDs to OS. Driver implemented the get_pd_list function to get the system PD from FW. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] megaraid_sas: Add new megaraid SAS 2 controller support to the driverYang, Bo2009-10-292-5/+138
| | | | | | | | | Add the new megaraid sas 2 controller to the driver. megaraid sas2 is LSI next generation SAS products. driver add the interface to support this product. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] megaraid_sas: add sysfs for AEN pollingYang, Bo2009-10-291-1/+23
| | | | | | | update the sysfs parameter to tell application driver support AEN poll Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] megaraid_sas: Add poll mechanism to megaraid sas driverYang, Bo2009-10-292-1/+45
| | | | | | | | Add Poll_wait mechanism to SAS-2 MegaRAID SAS Linux driver. Driver will wakeup poll after the driver get event from MegaRAID SAS FW. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] megaraid_sas: tape drive support fixYang, Bo2009-10-291-0/+11
| | | | | | | | | Add the Tape drive fix to the megaraid_sas driver: If the command is for the tape device, set the FW pthru timeout to the os layer timeout value. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Bump version 03.100.03.00Kashyap, Desai2009-10-291-2/+2
| | | | | | | | Bump version to 03.100.03.00 Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: No link rate change, do not call update links nor unblock deviceKashyap, Desai2009-10-291-25/+27
| | | | | | | | | | | | | | | | (1) target resets are sending link change rate events with no link rate change -> thus said the driver was modified so when there is no link rate change, we don't need to call mpt2sas_transport_update_links nor _scsih_ublock_io_device. (2) There were changes made in _scsih_sas_topology_change_event_debug to change the debug strings so they are more clear. Also the link rate change information was added to display the new and previous link rate. for the MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST event when the ExpStatus is set to zero, display "responding" instead of "unknown status". Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas : Add support for RAID Action System Shutdown Initiated at OS ↵Kashyap, Desai2009-10-292-1/+136
| | | | | | | | | | | | | | | | | | | | | | | | | shutdown (1) Added new function _scsih_ir_shutdown. This function will issue the MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED request via MPI2_FUNCTION_RAID_ACTION. The function will wait 10 seconds for reply message frame, then print out the ioc status and loginfo. This function is only called when there are raid volumes present. (2) Add shutdown callback in the struct pci_driver object scsih_driver. This will be called only when the system is shutting down. From this function, we will call _scsih_ir_shutdown mentioned above. (3) Add support in _scsih_remove to call _scsih_ir_shutdown. The function _scsih_remove will be called when the driver is unloaded (and system is still running). scsih internal command contex is added to send internal message frames from mpt2sas_scsih.c. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Freeze the sdev IO queue when firmware sends internal dev resetKashyap, Desai2009-10-291-1/+33
| | | | | | | | | | | | When receiving the MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET event, the driver will set the tm_busy flag in the sdev private host data, When tm_busy flag is set, the driver will return SCSI_MLQUEUE_DEVICE_BUSY, effectly freezing the IO to the device. The tm_busy flag is cleared with the MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET event. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas : PPC (power pc) endian bug fix'sKashyap, Desai2009-10-294-22/+24
| | | | | | | | | | | | | | | | | | (1) EEDP(End to End data protection) was not working. This was due to not setting EEDP BlockSize and Flags to little endian format in the message frame. (2) Some expander sysfs attributes were not getting set properly. The sas format was not getting set due to endian issues with sas_format field in the struct rep_manu_reply. Since sas_format was not set properly, the component_vendor_id, component_revision_id, and component_id were not set. (3) In _transport_smp_handler: we don't need to convert the smid from little endian to cpu prior to calling mpt2sas_base_free_smid, because its allready in cpu format. (4) Some loginfos and ioc status were not xonverted from little endian to cpu. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: mpt2sas_base_get_sense_buffer_dma should be returning little ↵Kashyap, Desai2009-10-294-6/+7
| | | | | | | | | | | | | endian cpu_to_le64 when calculating the physical dma address. This will properly handle endianess on big endian systems. The return value of this function was changed from dma_addr_t to __le64. Remove the typecasting of u32 when setting the SenseBufferLowAddress, since its already in __le32 format. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Return DID_TRANSPORT_DISRUPTED in nexus ↵Kashyap, Desai2009-10-291-4/+3
| | | | | | | | | | | | | | | | loss,SCSI_MLQUEUE_DEVICE_BUSY if device is busy 1 Its observed that the OS was sending request to the driver after it had been put into blocking state, so the driver was modified to return SCSI_MLQUEUE_DEVICE_BUSY. 2. Driver will return DID_TRANSPORT_DISRUPTED when sdev is haivng nexus loss. This occurrs when sdev is blocked, between the MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING and MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING events. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Retrieve the ioc facts prior to putting the controller into ↵Kashyap, Desai2009-10-291-2/+2
| | | | | | | | | | | | | | READY state The driver needs to retrieve the ioc facts prior to putting the controller into READY state. The current design is calling ioc facts after putting the controller into READY state, which means the driver is sending a diag reset instead of message unit reset becuase the capability information is not yet available. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added new info messages for IR and Expander events.Kashyap, Desai2009-10-291-2/+14
| | | | | | | | | | | | | | (1) for the MPI2_EVENT_IR_OPERATION_STATUS event, add support to print "background init" or "make data consistent" for debugging purposes. If the RAIDOperation is set to a value not defined, then don't print anything (2) for the MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE event, add support to print "expander reduced functionality" and "expander reduced functionality complete", which are new events. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Limit the max_depth to 32 for SATA devices which are not ↵Kashyap, Desai2009-10-291-0/+25
| | | | | | | | | | | part of volume Added sanity check in _scsih_change_queue_depth to limit the max_depth to 32 for SATA devices. This is only for physical devices not part of a volume. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added support to set the TimeStamp when sending ioc_initKashyap, Desai2009-10-291-0/+9
| | | | | | | Added support to set the TimeStamp when sending ioc_init. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Add Extended Type for Diagnostic Buffer supportKashyap, Desai2009-10-293-8/+29
| | | | | | | | | | | Added tests for registry entries of EXBuffSize, EXImmed, and EXType to support the new Extended diag buffer type. Modified code where necessary to handle the new ExtendedType field in the F/W diagnostic Post and Release messages. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added command line option diag_buffer_enable.Kashyap, Desai2009-10-293-37/+104
| | | | | | | | | | | | | | | | | | | | | | | | Added command line option diag_buffer_enable. When the command line option is set, the driver will automatically post diag buffers at driver load time. The command line option diag_buffer_enable is bitwise, so it's possible to enable both and/or snapshot + trace buffers. For trace, the driver will allocate 1MB buffer, whereas for snapshot its 2MB. The purpose for this is so the enduser doesn't have to manually use an application to setup diag buffers for debugging firmware related issues. Here is some examples trace: # insmod mpt2sas.ko diag_buffer_enable=1 snapshot: # insmod mpt2sas.ko diag_buffer_enable=2 both trace and snapshot: # insmod mpt2sas.ko diag_buffer_enable=3 Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Fixed some of the commentKashyap, Desai2009-10-291-10/+10
| | | | | | | | | Fixed some of the comments sections for some of the function so "@ioc: pointer to scsi command object" was changed to "@ioc: per adapter object" Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Support for stopping driver when Firmware encountersKashyap, Desai2009-10-294-16/+119
| | | | | | | | | | | | | | | | | | | | | | | Added command line option and shost sysfs attribute called mpt2sas_fwfault_debug. When enduser writes a "1" to this parameter, this will enable support in the driver for debugging firmware timeout related issues. This handling was added in three areas (a) scsi error handling callback called task_abort, (b) IOCTL interface, and (c) other timeouts that result in diag resets, such as manufacturing config pages. When this support is enabled, the driver will provide dump_stack to console, halt controller firmware, and panic driver. The end user probably would want to setup serial console redirection so the dump stack can be seen. Here are the three methods for enable this support: (a) # insmod mpt2sas.ko mpt2sas_fwfault_debug=1 (b) # echo 1 > /sys/module/mpt2sas/parameters/mpt2sas_fwfault_debug (c) # echo 1 > /sys/class/scsi_host/host#/fwfault_debug (where # is the host number) Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Adding MPI Headers - revision LKashyap, Desai2009-10-295-14/+305
| | | | | | | | | | | | | | | The new headers contain the following changes: (1) Added IO Unit Page 7. (2) Added new device ids for SAS2208. (3) Added SAS IO Unit Page 5. (4) Added partial and slumber power management capable flags to SAS Device Page 0 Flags field. (5) Added PhyInfo defines for power condition. (6) Added Ethernet configuration pages. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: New device SAS2208 support is addedKashyap, Desai2009-10-292-0/+26
| | | | | | | | | Added device ids range for { 0x80 - 87 } , modified mpi/mpi2_cnfg.h containing MPI2_MFGPAGE_DEVID_SAS2208_X. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Add support in the driver to check for valid response infoKashyap, Desai2009-10-291-13/+14
| | | | | | | | | | | | | Add support in the driver to check for valid response info in the scsi state, then check to see if the response code is MPI2_SCSITASKMGMT_RSP_INVALID_FRAME; when this condition occurrs, the driver will return DID_SOFT_ERROR. A return code of DID_SOFT_ERROR will result in a retry at the scsi-mid layer level. An additional change added to obtain the response code from the 1st byte of the response info instead of last. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Expander remove fails when it is processing another expander ↵Kashyap, Desai2009-10-291-47/+62
| | | | | | | | | | | | | | | | | | add. This handles the case where driver receives a expander removal event while it is in the middle of processing an expander add event. The existing implementation will stop processing futher device adds when a expander delete arrives on top of add expander add. Due to a sanity check in the driver, the devices there were not added, were never handshaked to firmware with the device removal handshake protocal. Since the driver didnt' do the handshake, the controller never provide further add events. To fix this issue, the sanity check was removed so the driver will always do the device removal handshake protocal. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Driver will use sas address instead of handle as a lookupKashyap, Desai2009-10-293-210/+255
| | | | | | | | | | | | | | | | | The device driver was not handling updating device handles in all cases across diag resets. To fix this issue, the driver is converted to using sas address instead of handle as a lookup reference to the parent expander or sas_host. Also, for both expanders and sas host, the phy handle will be one unique handle. In the sas host case, the phy handle can be different for every phy, so the change is to set the handle to the handle of the first phy; every phy will be one single sas address(phy 0) instead of a different sas address for every phy(previous implementation). So making one consistent sas address for all the direct attachedports to the sas host, will make it better user experience when using udev /dev/disk/by-path dev nodes Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit v1.1 at 2024-10-31 02:26:51 +0000