aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* IB/mthca: Always build debugging code unless CONFIG_EMBEDDED=yRoland Dreier2006-04-024-11/+29
| | | | | | | | | | | | Change the mthca debugging trace output code so that it can enabled and disabled at runtime with the debug_level module parameter in sysfs. Also, don't allow CONFIG_INFINIBAND_MTHCA_DEBUG to be disabled unless CONFIG_EMBEDDED is selected. We want users (and especially distros) to have this turned on unless they really need to save space, because by the time we want debugging output, it's usually too late to rebuild a kernel. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IPoIB: Always build debugging code unless CONFIG_EMBEDDED=yRoland Dreier2006-04-021-1/+2
| | | | | | | | | | | Don't allow CONFIG_INFINIBAND_IPOIB_DEBUG to be disabled unless CONFIG_EMBEDDED is selected. We want users (and especially distros) to have this turned on unless they really need to save space, because by the time we want debugging output, it's usually too late to rebuild a kernel. The debugging output can be controlled at runtime via the debug_level module parameter in sysfs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mad: fix oops in cancel_madsMichael S. Tsirkin2006-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have seen the following OOPs in cancel_mads, when restarting opensm multiple times: Call Trace: [<c010549b>] show_stack+0x9b/0xb0 [<c01055ec>] show_registers+0x11c/0x190 [<c01057cd>] die+0xed/0x160 [<c031b966>] do_page_fault+0x3f6/0x5d0 [<c010511f>] error_code+0x4f/0x60 [<f8ac4e38>] cancel_mads+0x128/0x150 [ib_mad] [<f8ac2811>] unregister_mad_agent+0x11/0x130 [ib_mad] [<f8ac2a12>] ib_unregister_mad_agent+0x12/0x20 [ib_mad] [<f8b10f23>] ib_umad_close+0xf3/0x130 [ib_umad] [<c0162937>] __fput+0x187/0x1c0 [<c01627a9>] fput+0x19/0x20 [<c0160f7a>] filp_close+0x3a/0x60 [<c0121ca8>] put_files_struct+0x68/0xa0 [<c0103cf7>] do_signal+0x47/0x100 [<c0103ded>] do_notify_resume+0x3d/0x40 [<c0103f9e>] work_notifysig+0x13/0x25 We traced this back to local_completions unlocking mad_agent_priv->lock while still keeping a pointer into local_list. A later call to list_del(&local->completion_list) would then corrupt the list. To fix this, remove the entry from local_list after looking it up but before releasing mad_agent_priv->lock, to prevent cancel_mads from finding and freeing it. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds2006-04-0237-472/+5658
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (28 commits) [ALSA] Kconfig SND_SEQUENCER_OSS help text fix [ALSA] Add Aux input switch control for Aureon Universe [ALSA] pcxhr - Fix the crash with REV01 board [ALSA] sound/pci/hda: use create_singlethread_workqueue() [ALSA] hda-intel - Add support of ATI SB600 [ALSA] cs4281 - Fix the check of timeout in probe [ALSA] cs4281 - Fix the check of right channel [ALSA] Test volume resolution of usb audio at initialization [ALSA] maestro3.c: fix BUG, optimization [ALSA] HDA/Realtek: multiple input mux definitions and pin mode additions [ALSA] AdLib FM card driver [ALSA] Fix / clean up PCM-OSS setup hooks [ALSA] Clean up PCM codes (take 2) [ALSA] Tiny clean up of PCM codes [ALSA] ISA drivers bailing on first !enable[i] [ALSA] Remove obsolete kfree_nocheck call [ALSA] Remove obsolete kfree_nocheck call [ALSA] Add snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards [ALSA] Add snd-riptide driver for Conexant Riptide chip [ALSA] hda-codec - Fix noisy output wtih AD1986A 3stack model ...
| * [ALSA] Kconfig SND_SEQUENCER_OSS help text fixFrederik Deweerdt2006-03-311-2/+3
| | | | | | | | | | | | | | Fix misleading help text for SND_SEQUENCER_OSS config option. Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] Add Aux input switch control for Aureon UniverseMaximilian Rehkopf2006-03-312-3/+161
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a mixer control which allows the user to switch the Aux playback between the internal Aux jack, Wavetable, and Rear Line-In on Aureon Universe cards. For switching, a PCA9554 (8-line GPIO with I2C interface) and a 74HC4052 (dual 4-way mux/demux) are used. Output 0 and 1 of the PCA9554 are connected to the select pins of the 74HC4052. The I2C interface of the PCA9554 is connected to the card's internal SPI bus which is also used to control the WM8770 and CS8415. SPI and I2C on the same lines... To communicate with the PCA9554 the WM8770 and CS8415 are disabled and an I2C Stop Condition is generated before the Start Condition (needed for synchronisation because other SPI traffic appear to confuse the PCA9554). Then a normal I2C data transfer takes place. Programming must be done ridiculously slow; in theory, 4.7us is the minimum delay time for normal-speed I2C according to the datasheet, but even with 10us switching was unreliable. The Windows driver from Terratec does the programming very slowly, too (checked with an oscilloscope). PCA9554 datasheet: http://www.semiconductors.philips.com/acrobat/datasheets/PCA9554_9554A_6.pdf 74HC4052 datasheet: http://www.semiconductors.philips.com/acrobat/datasheets/74HC_HCT4052_4.pdf Signed-off-by: Maximilian Rehkopf <otakon@gmx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] pcxhr - Fix the crash with REV01 boardMarkus Bollinger2006-03-311-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a new board revision for pcxhr boards, the PCXHR_CHIPSC_GPI_USERI bit is no more supported. The cards concerned have a REV01 in their PCI ID. As the current driver tests this bit and does not load the first Xilinx binary when it's 1, the card will crash on Xilinx access over PCI. (the PCI will freeze ....) The fix (fix to version 1.0.11rc4) works for both REV00 and REV01 cards. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] sound/pci/hda: use create_singlethread_workqueue()OGAWA Hirofumi2006-03-311-1/+1
| | | | | | | | | | | | | | | | | | process_unsol_events() seems to assume a singlethread one (IOW, racey). So, this patch uses create_singlethread_workqueue() instead of create_workqueue(). Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] hda-intel - Add support of ATI SB600Felix Kuehling2006-03-311-0/+2
| | | | | | | | | | | | | | This patch adds support for high definition audio on ATI SB600. Signed-off-by: Felix Kuehling <fkuehlin@ati.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] cs4281 - Fix the check of timeout in probeTakashi Iwai2006-03-311-13/+13
| | | | | | | | | | | | | | Fix the check of timeout in probe routines to work properly reagrdless of HZ (ALSA bug#1976). Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] cs4281 - Fix the check of right channelTakashi Iwai2006-03-311-1/+1
| | | | | | | | | | | | Fix the check of right channel in mixer volume put callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] Test volume resolution of usb audio at initializationTakashi Iwai2006-03-311-3/+34
| | | | | | | | | | | | | | | | | | | | Test the volume of usb audio whether actually it works and adjusts the resolution value according to it. Some USB audio devices report a lower resolution than it reacts. The only possible check is to write and read a volume value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] maestro3.c: fix BUG, optimizationAndreas Mohr2006-03-311-20/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | - fix brown-paper-bag locking bug (lock() / return / unlock()) - improve central function snd_m3_update_ptr() (avoid expensive integer divisions) - add cpu_relax() to busy-wait I/O loop as recommended (does this require special macro support in ALSA for older kernels??) - constify several structs - spelling updates Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] HDA/Realtek: multiple input mux definitions and pin mode additionsJonathan Woithe2006-03-311-56/+149
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch relative to CVS from 20060324 adds the following features to the Realtek HDA codec. 1) Define two new pin modes: ALC_PIN_DIR_IN_NOMICBIAS and ALC_PIN_DIR_INOUT_NOMICBIAS. These can be used with jack mode switch definitions in mixers to prevent the user being offered the mic bias options if the hardware doesn't support it. 2) Add the ability to have different input mux definitions for different ADCs. This is needed because the ALC260 chip uses different mux layouts for the two onboard ADCs. A new field (num_mux_defs) was added to the alc_spec and alc_config_preset structures to support this. 3) Adjust numerous comments to make them consistent with the above changes. 4) Utilise the new multi-mux definition functionality for the ALC260 fujitsu model to allow recording of the mixer output. 5) Utilise the new multi-mux definition functionality for the ALC260 test model to make the mux selections a little less confusing. 6) Allow the headphone jack of the ALC260 acer model to be retasked in the mixer. 6) Utilise the new multi-mux definition functionality for the ALC260 acer model to give access to the mixer output and the retasked headphone jack. At this stage the *_NOMICBIAS modes are not used. We have reports that the "Line" jack of at least some Acer models doesn't pass the bias out, and we also know that NIDs 0x0f and 0x10 don't seem to accept the mic bias requests at all. However, I feel we need to collect more evidence on both counts before committing to the use of *_NOMICBIAS. In the case of the Acers, it's not clear whether this issue (probably caused by the inclusion of DC blocking capacitors) affects all Acer models or just a small number. With the issue with NIDs 0x0f and 0x10 it's unclear whether this is a hardware bug which will be addressed in later chip revisions or if it's an intentional restriction. The datasheet makes no mention of the restriction so at this stage I'm inclined to consider it a hardware bug. Comments in the source reflect this reasoning. On a similar theme, the headphone jack of the Fujitsu S7020 also doesn't appear to pass mic bias voltage. I'm still investigating this however. With the ability to retask the headphone jack, owners of ALC260-based Acer laptops should now be able to record 4 channels of audio if they desire. The multiple mux definitions allow this jack to be presented from both ADCs (since this mux input is one of those which differs between the muxes). This patch has been tested on a Fujitsu S7020 laptop and appears to behave itself both for the "test" and "fujitsu" models. Definitions using only a single mux specification also work. Other ALC chips should be fine but I cannot test these myself. The "auto" modes should also continue to function but again I have not verified this. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] AdLib FM card driverRene Herman2006-03-314-0/+200
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Attached you'll find an ALSA driver for AdLib FM cards. An AdLib card is just an OPL2, which was already supported by sound/drivers/opl3, so only very minimal bus-glue is needed. The patch applies cleanly to both 2.6.16 and 2.6.16-mm1. The driver has been tested with an actual ancient 8-bit ISA AdLib card and works fine. It also works fine for an OPL3 {,emulation} as still found on many ISA soundcards but given that AdLib cards don't have their own mixer, upping the volume from 0 might be a problem without the card driver already loaded and driving the OPL3. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] Fix / clean up PCM-OSS setup hooksTakashi Iwai2006-03-312-71/+64
| | | | | | | | | | | | | | | | - Fix possible race of referring the setup hook from the running PCM - Fix memory leak in an error path of proc write - Clean up the setup hook parser Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] Clean up PCM codes (take 2)Takashi Iwai2006-03-316-219/+114
| | | | | | | | | | | | | | | | | | - Clean up initialization and destruction of substream instance Now snd_pcm_open_substream() alone does most initialization jobs. Add pcm_release callback for cleaning up at snd_pcm_release_substream() - Tidy up PCM oss code Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] Tiny clean up of PCM codesTakashi Iwai2006-03-314-39/+21
| | | | | | | | | | | | | | - Make snd_pcm_prepare() static - Clean up snd_pcm_kernel_*_ioctl() functions, reduce exports Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] ISA drivers bailing on first !enable[i]Rene Herman2006-03-311-2/+2
| | | | | | | | | | | | Fix the wrong check of enable option in cmi8330 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] Remove obsolete kfree_nocheck callTakashi Iwai2006-03-311-4/+1
| | | | | | | | | | | | | | Fixed the compilation, removing obsolete kfree_nocheck() call for memory debugging. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] Remove obsolete kfree_nocheck callTakashi Iwai2006-03-311-4/+2
| | | | | | | | | | | | | | Fixed the compilation, removing obsolete kfree_nocheck() call for memory debugging. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] Add snd-als300 driver for Avance Logic ALS300/ALS300+ soundcardsAsh Willis2006-03-314-0/+889
| | | | | | | | | | | | | | Added snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards by Ash Willis. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] Add snd-riptide driver for Conexant Riptide chipPeter Gruber2006-03-315-0/+2257
| | | | | | | | | | | | Add snd-riptide driver for Conexant Riptide chip by Peter Gruber. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] hda-codec - Fix noisy output wtih AD1986A 3stack modelTakashi Iwai2006-03-311-1/+8
| | | | | | | | | | | | Fixed the noisy output wtih AD1986A 3stack model using 2 channels. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] hda-codec - Fix unsol event initialization at resume of stac92xxTakashi Iwai2006-03-311-12/+6
| | | | | | | | | | | | Fix the re-initialization of unsolicited events at resume of stac92xx codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] Make CONFIG_SND_CS46XX_NEW_DSP yes as defaultTakashi Iwai2006-03-311-2/+3
| | | | | | | | | | | | | | Removed from CONFIG_EXPERIMENTAL from CONFIG_SND_CS46XX_NEW_DSP, and make default to yes. This option works fine for years. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] Add snd-miro driverMartin Langer2006-03-315-0/+1563
| | | | | | | | | | | | Added snd-miro driver for miroSOUND PCM by Martin Langer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] Cleanup unused argument for snd_power_wait()Takashi Iwai2006-03-315-20/+13
| | | | | | | | | | | | Removed the unused file argument of snd_power_wait(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] ice1712 - Fix wrong register value for DMX 6FIREAlan Horstmann2006-03-311-1/+1
| | | | | | | | | | | | | | | | | | | | I have just discovered I made an error in the register value set in 'Limit dmx6fire to 6 dacs' patch (bug1472). The value set should be '2a' not '0a' as in the original patch, which unintentionally disables the 2nd MPU 401 UART. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] via82xx - Add dxs entry for EPoX EP-8KRAITakashi Iwai2006-03-311-0/+1
| | | | | | | | | | | | Added the dxs_support entry for EPoX EP-8KRAI (ALSA bug#1423). Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] hda-codec - Fix VREF level of Mic inputs on STAC92xx codecsTakashi Iwai2006-03-311-6/+29
| | | | | | | | | | | | Fixed VREF level of Mic inputs on STAC92xx codecs (ALSA bug#1953). Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] Add support of LG LW20 laptopTakashi Iwai2006-03-312-0/+94
| | | | | | | | | | | | Add support of LG LW20 laptop with ALC880 codec (ALSA bug#1572). Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | [PATCH] sysfs: zero terminate sysfs write buffersGreg Kroah-Hartman2006-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | No one should be writing a PAGE_SIZE worth of data to a normal sysfs file, so properly terminate the buffer. Thanks to Al Viro for pointing out my supidity here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] revert incorrect mutex conversion in hdaps driverArjan van de Ven2006-04-021-19/+18
| | | | | | | | | | | | | | | | | | | | | | | | This reverts the mutex conversion that was recently done to the hdaps driver; this coversion was buggy because the hdaps driver started using this semaphore in IRQ context, which mutexes do not allow. Easiest solution for now is to just revert the patch (the patch was part of a bigger GIT commit, 9a61bf6300533d3b64d7ff29adfec00e596de67d but this only reverts this one file) Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds2006-04-025-36/+340
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] at91_wdt.c - Atmel AT91RM9200 watchdog driver [WATCHDOG] pcwd_usb.c: fix a NULL pointer dereference [WATCHDOG] pcwd.c sprintf/strcpy fix [WATCHDOG] pcwd.c general clean-up after patches [WATCHDOG] pcwd.c add debug info [WATCHDOG] pcwd.c pcwd_cleanup_module patch [WATCHDOG] pcwd.c firmware-info patch [WATCHDOG] pcwd.c control status patch
| * | [WATCHDOG] at91_wdt.c - Atmel AT91RM9200 watchdog driverAndrew Victor2006-04-023-0/+236
| | | | | | | | | | | | | | | | | | | | | | | | Watchdog driver for the Atmel AT91RM9200 processor. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@osdl.org>
| * | [WATCHDOG] pcwd_usb.c: fix a NULL pointer dereferenceAdrian Bunk2006-04-021-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Coverity checker noted that this resulted in a NULL pointer reference if we were coming from if (usb_pcwd == NULL) { printk(KERN_ERR PFX "Out of memory\n"); goto error; } Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@osdl.org>
| * | [WATCHDOG] pcwd.c sprintf/strcpy fixWim Van Sebroeck2006-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | change sprintf(pcwd_private.fw_ver_str, "ERROR"); to strcpy... as pointed out by Andrew Morton. Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@osdl.org>
| * | [WATCHDOG] pcwd.c general clean-up after patchesWim Van Sebroeck2006-04-021-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | removal of includes (since we don't use kmalloc and TASK_INTERRUPTABLE anymore). Addition of missing commands. Printk that lets the user know when the module was unloaded. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * | [WATCHDOG] pcwd.c add debug infoWim Van Sebroeck2006-04-021-0/+56
| | | | | | | | | | | | | | | | | | Add debugging info for the pcwd.c module. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * | [WATCHDOG] pcwd.c pcwd_cleanup_module patchWim Van Sebroeck2006-04-021-1/+0
| | | | | | | | | | | | | | | | | | static void pcwd_cleanup_module doesn't need a return; Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * | [WATCHDOG] pcwd.c firmware-info patchWim Van Sebroeck2006-04-021-14/+8
| | | | | | | | | | | | | | | | | | | | | Get the firmware version into the private data struct of the ISA-PC watchdog card. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * | [WATCHDOG] pcwd.c control status patchWim Van Sebroeck2006-04-021-18/+29
| | | | | | | | | | | | | | | | | | | | | | | | Clean-up the control status code (insert tabs where relevant), Add new Control Status defines, Make sure that the R2DS bit stays the same. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2006-04-0268-369/+262
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (48 commits) Documentation: fix minor kernel-doc warnings BUG_ON() Conversion in drivers/net/ BUG_ON() Conversion in drivers/s390/net/lcs.c BUG_ON() Conversion in mm/slab.c BUG_ON() Conversion in mm/highmem.c BUG_ON() Conversion in kernel/signal.c BUG_ON() Conversion in kernel/signal.c BUG_ON() Conversion in kernel/ptrace.c BUG_ON() Conversion in ipc/shm.c BUG_ON() Conversion in fs/freevxfs/ BUG_ON() Conversion in fs/udf/ BUG_ON() Conversion in fs/sysv/ BUG_ON() Conversion in fs/inode.c BUG_ON() Conversion in fs/fcntl.c BUG_ON() Conversion in fs/dquot.c BUG_ON() Conversion in md/raid10.c BUG_ON() Conversion in md/raid6main.c BUG_ON() Conversion in md/raid5.c Fix minor documentation typo BFP->BPF in Documentation/networking/tuntap.txt ...
| * | | Documentation: fix minor kernel-doc warningsMartin Waitz2006-04-025-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates the comments to match the actual code. Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
| * | | BUG_ON() Conversion in drivers/net/Eric Sesterhenn2006-04-0215-49/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
| * | | BUG_ON() Conversion in drivers/s390/net/lcs.cEric Sesterhenn2006-04-021-8/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
| * | | BUG_ON() Conversion in mm/slab.cEric Sesterhenn2006-04-021-12/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
| * | | BUG_ON() Conversion in mm/highmem.cEric Sesterhenn2006-04-021-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
| * | | BUG_ON() Conversion in kernel/signal.cEric Sesterhenn2006-04-021-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
generated by cgit v1.1 at 2024-10-30 09:17:43 +0000