aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/ABI
Commit message (Collapse)AuthorAgeFilesLines
* cciss: Add usage_count attribute to each logical drive in /sysStephen M. Cameron2009-10-011-0/+7
| | | | | | | | | | Add usage_count attribute to each logical drive at /sys/devices/<dev>/ccissX/cXdY/usage_count for controller X, logical drive Y. The usage count is the number of times the device has currently been opened. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* cciss: Add a "raid_level" attribute to each logical drive in /sysStephen M. Cameron2009-10-011-0/+7
| | | | | | | | | | | and change get rid of some magic numbers in raid lavel decoding. Add raid_level attribute to each logical drive at /sys/devices/<dev>/ccissX/cXdY/raid_level for controller X, logical drive Y Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* cciss: Add lunid attribute to each logical drive in /sysStephen M. Cameron2009-10-011-0/+7
| | | | | | | | | Add lunid attribute to each logical drive at /sys/devices/<dev>/ccissX/cXdY/lunid for controller X, logical drive Y Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* cciss: Allow triggering of rescan of logical drive topology via sysfs entryAndrew Patterson2009-10-011-0/+7
| | | | | | | | | | Added /sys/bus/pci/devices/<dev>/ccissX/rescan sysfs entry used to kick off a rescan that discovers logical drive topology changes. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* Merge branch 'release' of ↵Linus Torvalds2009-09-235-0/+189
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (119 commits) ACPI: don't pass handle for fixed hardware notifications ACPI: remove null pointer checks in deferred execution path ACPI: simplify deferred execution path acerhdf: additional BIOS versions acerhdf: convert to dev_pm_ops acerhdf: fix fan control for AOA150 model thermal: add missing Kconfig dependency acpi: switch /proc/acpi/{debug_layer,debug_level} to seq_file hp-wmi: fix rfkill memory leak on unload ACPI: remove unnecessary #ifdef CONFIG_DMI ACPI: linux/acpi.h should not include linux/dmi.h hwmon driver for ACPI 4.0 power meters topstar-laptop: add new driver for hotkeys support on Topstar N01 thinkpad_acpi: fix rfkill memory leak on unload thinkpad-acpi: report brightness events when required thinkpad-acpi: don't poll by default any of the reserved hotkeys thinkpad-acpi: Fix procfs hotkey reset command thinkpad-acpi: deprecate hotkey_bios_mask thinkpad-acpi: hotkey poll fixes thinkpad-acpi: be more strict when detecting a ThinkPad ...
| * Merge branch 'asus' into releaseLen Brown2009-09-195-0/+189
| |\
| | * asus-laptop: document sysfs interfaceCorentin Chary2009-08-281-0/+52
| | | | | | | | | | | | | | | Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
| | * led: document sysfs interfaceCorentin Chary2009-08-281-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | Also fix Documentation/led-class.txt, the acceptable range of values for brightness is 0-max_brightness, not 0-255. Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
| | * video/lcd: document sysfs interfaceCorentin Chary2009-08-281-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | Date and KernelVersion may be wrong because the lcd interface was introduced before git initial import. Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
| | * video/backlight: document sysfs interfaceCorentin Chary2009-08-281-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | Date and KernelVersion may be wrong because the backlight interface was introduced before git initial import. Cc:Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
| | * eeepc-laptop: document sysfs interfaceCorentin Chary2009-08-281-0/+50
| | | | | | | | | | | | | | | Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
* | | gpiolib: allow poll() on valueDaniel Glöckner2009-09-231-0/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many gpio chips allow to generate interrupts when the value of a pin changes. This patch gives usermode application the opportunity to make use of this feature by calling poll(2) on the /sys/class/gpio/gpioN/value sysfs file. The edge to trigger can be set in the edge file in the same directory. Possible values are "none", "rising", "falling", and "both". Using level triggers is not possible with current sysfs since nothing changes the GPIO value (and the IRQ keeps triggering). Edge triggering will "just work". Note that if there was an event between read() and poll(), the poll() returns immediately. Also note that this version only supports true GPIO interrupts. Some later patch might be able to synthesize this behavior by timer-driven polling; some systems seem to need that. [dbrownell@users.sourceforge.net: align ids to 16 bit ids; whitespace] Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | PCI: expose function reset capability in sysfsMichael S. Tsirkin2009-09-091-0/+10
|/ | | | | | | | | | | | | | Some devices allow an individual function to be reset without affecting other functions in the same device: that's what pci_reset_function does. For devices that have this support, expose reset attribite in sysfs. This is useful e.g. for virtualization, where a qemu userspace process wants to reset the device when the guest is reset, to emulate machine reboot as closely as possible. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* block: Update topology documentationMartin K. Petersen2009-08-011-14/+23
| | | | | | | | Update topology comments and sysfs documentation based upon discussions with Neil Brown. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* Merge git://git.infradead.org/mtd-2.6Linus Torvalds2009-06-221-0/+125
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (63 commits) mtd: OneNAND: Allow setting of boundary information when built as module jffs2: leaking jffs2_summary in function jffs2_scan_medium mtd: nand: Fix memory leak on txx9ndfmc probe failure. mtd: orion_nand: use burst reads with double word accesses mtd/nand: s3c6400 support for s3c2410 driver [MTD] [NAND] S3C2410: Use DIV_ROUND_UP [MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/write [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND [MTD] [NAND] S3C2410: Added a kerneldoc for s3c2410_nand_set mtd: physmap_of: Add multiple regions and concatenation support mtd: nand: max_retries off by one in mxc_nand mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440 mtd: onenand: add bbt_wait & unlock_all as replaceable for some platform mtd: Flex-OneNAND support mtd: nand: add OMAP2/OMAP3 NAND driver mtd: maps: Blackfin async: fix memory leaks in probe/remove funcs mtd: uclinux: mark local stuff static mtd: uclinux: do not allow to be built as a module mtd: uclinux: allow systems to override map addr/size mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITs ...
| * Merge branch 'next-mtd' of git://aeryn.fluff.org.uk/bjdooks/linuxDavid Woodhouse2009-06-081-0/+479
| |\
| * | Documentation: add MTD sysfs docsKevin Cernekee2009-05-291-0/+125
| | | | | | | | | | | | | | | | | | Signed-off-by: Kevin Cernekee <kpc.mtd@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | | Merge branch 'linux-next' of ↵Linus Torvalds2009-06-221-0/+7
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits) PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write PCI: Fix the NIU MSI-X problem in a better way PCI ASPM: remove get_root_port_link PCI ASPM: cleanup pcie_aspm_sanity_check PCI ASPM: remove has_switch field PCI ASPM: cleanup calc_Lx_latency PCI ASPM: cleanup pcie_aspm_get_cap_device PCI ASPM: cleanup clkpm checks PCI ASPM: cleanup __pcie_aspm_check_state_one PCI ASPM: cleanup initialization PCI ASPM: cleanup change input argument of aspm functions PCI ASPM: cleanup misc in struct pcie_link_state PCI ASPM: cleanup clkpm state in struct pcie_link_state PCI ASPM: cleanup latency field in struct pcie_link_state PCI ASPM: cleanup aspm state field in struct pcie_link_state PCI ASPM: fix typo in struct pcie_link_state PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS PCI: remove redundant __msi_set_enable() PCI PM: consistently use type bool for wake enable variable x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded ...
| * | | PCI hotplug: create symlink to hotplug driver moduleKenji Kaneshige2009-06-161-0/+7
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create symbolic link to hotplug driver module in the PCI slot directory (/sys/bus/pci/slots/<SLOT#>). In the past, we need to load hotplug drivers one by one to identify the hotplug driver that handles the slot, and it was very inconvenient especially for trouble shooting. With this change, we can easily identify the hotplug driver. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | | Merge branch 'for_linus' of ↵Linus Torvalds2009-06-181-0/+10
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: clean up jbd2_journal_try_to_free_buffers() ext4: Don't update ctime for non-extent-mapped inodes ext4: Fix up whitespace issues in fs/ext4/inode.c ext4: Fix 64-bit block type problem on 32-bit platforms ext4: teach the inode allocator to use a goal inode number ext4: Use a hash of the topdir directory name for the Orlov parent group ext4: document the "abort" mount option ext4: move the abort flag from s_mount_opts to s_mount_flags ext4: update the s_last_mounted field in the superblock ext4: change s_mount_opt to be an unsigned int ext4: online defrag -- Add EXT4_IOC_MOVE_EXT ioctl ext4: avoid unnecessary spinlock in critical POSIX ACL path ext3: avoid unnecessary spinlock in critical POSIX ACL path ext4: convert instrumentation from markers to tracepoints jbd2: convert instrumentation from markers to tracepoints
| * | | ext4: teach the inode allocator to use a goal inode numberAndreas Dilger2009-06-131-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enhance the inode allocator to take a goal inode number as a paremeter; if it is specified, it takes precedence over Orlov or parent directory inode allocation algorithms. The extents migration function uses the goal inode number so that the extent trees allocated the migration function use the correct flex_bg. In the future, the goal inode functionality will also be used to allocate an adjacent inode for the extended attributes. Also, for testing purposes the goal inode number can be specified via /sys/fs/{dev}/inode_goal. This can be useful for testing inode allocation beyond 2^32 blocks on very large filesystems. Signed-off-by: Andreas Dilger <adilger@sun.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* | | | LinuxPPS: core supportRodolfo Giometti2009-06-181-0/+73
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the kernel side of the PPS support currently named "LinuxPPS". PPS means "pulse per second" and a PPS source is just a device which provides a high precision signal each second so that an application can use it to adjust system clock time. Common use is the combination of the NTPD as userland program with a GPS receiver as PPS source to obtain a wallclock-time with sub-millisecond synchronisation to UTC. To obtain this goal the userland programs shoud use the PPS API specification (RFC 2783 - Pulse-Per-Second API for UNIX-like Operating Systems, Version 1.0) which in part is implemented by this patch. It provides a set of chars devices, one per PPS source, which can be used to get the time signal. The RFC's functions can be implemented by accessing to these char devices. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg KH <greg@kroah.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2009-06-112-0/+92
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits) block: add request clone interface (v2) floppy: fix hibernation ramdisk: remove long-deprecated "ramdisk=" boot-time parameter fs/bio.c: add missing __user annotation block: prevent possible io_context->refcount overflow Add serial number support for virtio_blk, V4a block: Add missing bounce_pfn stacking and fix comments Revert "block: Fix bounce limit setting in DM" cciss: decode unit attention in SCSI error handling code cciss: Remove no longer needed sendcmd reject processing code cciss: change SCSI error handling routines to work with interrupts enabled. cciss: separate error processing and command retrying code in sendcmd_withirq_core() cciss: factor out fix target status processing code from sendcmd functions cciss: simplify interface of sendcmd() and sendcmd_withirq() cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code cciss: Use schedule_timeout_uninterruptible in SCSI error handling code block: needs to set the residual length of a bidi request Revert "block: implement blkdev_readpages" block: Fix bounce limit setting in DM Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt ... Manually fix conflicts with tracing updates in: block/blk-sysfs.c drivers/ide/ide-atapi.c drivers/ide/ide-cd.c drivers/ide/ide-floppy.c drivers/ide/ide-tape.c include/trace/events/block.h kernel/trace/blktrace.c
| * | | cciss: add cciss driver sysfs entriesAndrew Patterson2009-06-021-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add sysfs entries to the cciss driver needed for the dm/multipath tools. A file for vendor, model, rev, and unique_id is added for each logical drive under directory /sys/bus/pci/devices/<dev>/ccissX/cXdY. Where X = the controller (or host) number and Y is the logical drive number. A link from /sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY to /sys/block/cciss!cXdY/device is also created. A bus is created in /sys/bus/cciss. A link is created from the pci ccissX entry to /sys/bus/cciss/devices/ccissX. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * | | block: Export I/O topology for block devices and partitionsMartin K. Petersen2009-05-221-0/+59
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To support devices with physical block sizes bigger than 512 bytes we need to ensure proper alignment. This patch adds support for exposing I/O topology characteristics as devices are stacked. logical_block_size is the smallest unit the device can address. physical_block_size indicates the smallest I/O the device can write without incurring a read-modify-write penalty. The io_min parameter is the smallest preferred I/O size reported by the device. In many cases this is the same as the physical block size. However, the io_min parameter can be scaled up when stacking (RAID5 chunk size > physical block size). The io_opt characteristic indicates the optimal I/O size reported by the device. This is usually the stripe width for arrays. The alignment_offset parameter indicates the number of bytes the start of the device/partition is offset from the device's natural alignment. Partition tools and MD/DM utilities can use this to pad their offsets so filesystems start on proper boundaries. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | | Merge branch 'linus' into x86/cpuIngo Molnar2009-06-073-5/+488
|\ \ \ | |/ /
| * | slub: add Documentation/ABI/testing/sysfs-kernel-slabDavid Rientjes2009-04-281-0/+479
| |/ | | | | | | | | | | | | | | | | | | | | | | Adds documentation for the slub ABI. This is placed in the `testing' directory since the meanings of these files are still subject to change as slub is developed. Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
| * ACPI: add /sys/firmware/acpi/interrupts/sci_not counterLen Brown2009-04-211-2/+6
| | | | | | | | | | | | | | This counter may prove useful in debugging some spurious interrupt issues seen in the field. Signed-off-by: Len Brown <len.brown@intel.com>
| * doc: use correct debugfs mountpointShen Feng2009-04-131-3/+3
| | | | | | | | | | | | | | | | | | Use the default mountpoint of debugfs in the pktcdvd ABI. Signed-off-by: Shen Feng <shen@cn.fujitsu.com> Cc: <balagi@justmail.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | x86/docs: add description for cache_disable sysfs interfaceMark Langsdorf2009-04-101-0/+18
|/ | | | | | | | Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <20090409133153.GL31527@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge branch 'tracing-for-linus' of ↵Linus Torvalds2009-04-051-0/+71
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits) tracing, net: fix net tree and tracing tree merge interaction tracing, powerpc: fix powerpc tree and tracing tree interaction ring-buffer: do not remove reader page from list on ring buffer free function-graph: allow unregistering twice trace: make argument 'mem' of trace_seq_putmem() const tracing: add missing 'extern' keywords to trace_output.h tracing: provide trace_seq_reserve() blktrace: print out BLK_TN_MESSAGE properly blktrace: extract duplidate code blktrace: fix memory leak when freeing struct blk_io_trace blktrace: fix blk_probes_ref chaos blktrace: make classic output more classic blktrace: fix off-by-one bug blktrace: fix the original blktrace blktrace: fix a race when creating blk_tree_root in debugfs blktrace: fix timestamp in binary output tracing, Text Edit Lock: cleanup tracing: filter fix for TRACE_EVENT_FORMAT events ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release() x86: kretprobe-booster interrupt emulation code fix ... Fix up trivial conflicts in arch/parisc/include/asm/ftrace.h include/linux/memory.h kernel/extable.c kernel/module.c
| * Merge branch 'tracing/core-v2' into tracing-for-linusIngo Molnar2009-04-021-0/+71
| |\ | | | | | | | | | | | | | | | | | | | | | Conflicts: include/linux/slub_def.h lib/Kconfig.debug mm/slob.c mm/slub.c
| | * Merge branches 'tracing/ftrace', 'tracing/mmiotrace' and 'linus' into ↵Ingo Molnar2009-03-021-0/+43
| | |\ | | | | | | | | | | | | tracing/core
| | * \ Merge branch 'linus' into tracing/blktraceIngo Molnar2009-02-191-1/+1
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: block/blktrace.c Semantic merge: kernel/trace/blktrace.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | * \ \ Merge commit 'v2.6.29-rc1' into tracing/urgentIngo Molnar2009-01-112-77/+110
| | |\ \ \
| | * \ \ \ Merge branch 'linus' into tracing/kmemtrace2Ingo Molnar2009-01-061-6/+8
| | |\ \ \ \
| | * | | | | kmemtrace: Fix typos in documentation.Eduard - Gabriel Munteanu2008-12-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Corrected the ABI description and the kmemtrace usage guide. Thanks to Randy Dunlap for noticing these errors. Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
| | * | | | | kmemtrace: Additional documentation.Eduard - Gabriel Munteanu2008-12-291-0/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Documented kmemtrace's ABI, purpose and design. Also includes a short usage guide, FAQ, as well as a link to the userspace application's Git repository, which is currently hosted at repo.or.cz. Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
* | | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2009-04-031-9/+48
|\ \ \ \ \ \ \ | |/ / / / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (32 commits) regulator: twl4030 VAUX3 supports 3.0V regulator: Support disabling of unused regulators by machines regulator: Don't increment use_count for boot_on regulators twl4030-regulator: expose VPLL2 regulator: refcount fixes regulator: Don't warn if we failed to get a regulator regulator: Allow boot_on regulators to be disabled by clients regulator: Implement list_voltage for WM835x LDOs and DCDCs twl4030-regulator: list more VAUX4 voltages regulator: Don't warn on omitted voltage constraints regulator: Implement list_voltage() for WM8400 DCDCs and LDOs MMC: regulator utilities regulator: twl4030 voltage enumeration (v2) regulator: twl4030 regulators regulator: get_status() grows kerneldoc regulator: enumerate voltages (v2) regulator: Fix get_mode() for WM835x DCDCs regulator: Allow regulators to set the initial operating mode regulator: Suggest use of datasheet supply or pin names for consumers regulator: email - update email address and regulator webpage. ...
| * | | | | | regulator: add get_status()David Brownell2009-03-311-9/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on previous LKML discussions: * Update docs for regulator sysfs class attributes to highlight the fact that all current attributes are intended to be control inputs, including notably "state" and "opmode" which previously implied otherwise. * Define a new regulator driver get_status() method, which is the first method reporting regulator outputs instead of inputs. It can report on/off and error status; or instead of simply "on", report the actual operating mode. For the moment, this is a sysfs-only interface, not accessible to regulator clients. Such clients can use the current notification interfaces to detect errors, if the regulator reports them. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | | | | | | Merge branch 'for_linus' of ↵Linus Torvalds2009-04-011-0/+81
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (33 commits) ext4: Regularize mount options ext4: fix locking typo in mballoc which could cause soft lockup hangs ext4: fix typo which causes a memory leak on error path jbd2: Update locking coments ext4: Rename pa_linear to pa_type ext4: add checks of block references for non-extent inodes ext4: Check for an valid i_mode when reading the inode from disk ext4: Use WRITE_SYNC for commits which are caused by fsync() ext4: Add auto_da_alloc mount option ext4: Use struct flex_groups to calculate get_orlov_stats() ext4: Use atomic_t's in struct flex_groups ext4: remove /proc tuning knobs ext4: Add sysfs support ext4: Track lifetime disk writes ext4: Fix discard of inode prealloc space with delayed allocation. ext4: Automatically allocate delay allocated blocks on rename ext4: Automatically allocate delay allocated blocks on close ext4: add EXT4_IOC_ALLOC_DA_BLKS ioctl ext4: Simplify delalloc code by removing mpage_da_writepages() ext4: Save stack space by removing fake buffer heads ...
| * | | | | | | ext4: Add sysfs supportTheodore Ts'o2009-03-311-0/+81
| |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add basic sysfs support so that information about the mounted filesystem and various tuning parameters can be accessed via /sys/fs/ext4/<dev>/*. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* | | | | | | Merge branch 'linux-next' of ↵Linus Torvalds2009-04-011-0/+70
|\ \ \ \ \ \ \ | |/ / / / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits) PCI: fix HT MSI mapping fix PCI: don't enable too much HT MSI mapping x86/PCI: make pci=lastbus=255 work when acpi is on PCI: save and restore PCIe 2.0 registers PCI: update fakephp for bus_id removal PCI: fix kernel oops on bridge removal PCI: fix conflict between SR-IOV and config space sizing powerpc/PCI: include pci.h in powerpc MSI implementation PCI Hotplug: schedule fakephp for feature removal PCI Hotplug: rename legacy_fakephp to fakephp PCI Hotplug: restore fakephp interface with complete reimplementation PCI: Introduce /sys/bus/pci/devices/.../rescan PCI: Introduce /sys/bus/pci/devices/.../remove PCI: Introduce /sys/bus/pci/rescan PCI: Introduce pci_rescan_bus() PCI: do not enable bridges more than once PCI: do not initialize bridges more than once PCI: always scan child buses PCI: pci_scan_slot() returns newly found devices PCI: don't scan existing devices ... Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
| * | | | | | PCI: Introduce /sys/bus/pci/devices/.../rescanAlex Chiang2009-03-201-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This interface allows the user to force a rescan of the device's parent bus and all subordinate buses, and rediscover devices removed earlier from this part of the device tree. Cc: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | | PCI: Introduce /sys/bus/pci/devices/.../removeAlex Chiang2009-03-201-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds an attribute named "remove" to a PCI device's sysfs directory. Writing a non-zero value to this attribute will remove the PCI device and any children of it. Trent Piepho wrote the original implementation and documentation. Thanks to Vegard Nossum for testing under kmemcheck and finding locking issues with the sysfs interface. Cc: Trent Piepho <xyzzy@speakeasy.org> Tested-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | | PCI: Introduce /sys/bus/pci/rescanAlex Chiang2009-03-201-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This interface allows the user to force a rescan of all PCI buses in system, and rediscover devices that have been removed earlier. pci_bus_attrs implementation from Trent Piepho. Thanks to Vegard Nossum for discovering locking issues with the sysfs interface. Cc: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | | PCI: document SR-IOV sysfs entriesYu Zhao2009-03-201-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reviewed-by: Randy Dunlap <rdunlap@xenotime.net> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | | PCI: add remove_id sysfs entryChris Wright2009-03-201-0/+16
| | |_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a remove_id sysfs entry to allow users of new_id to later remove the added dynid. One use case is management tools that want to dynamically bind/unbind devices to pci-stub driver while devices are assigned to KVM guests. Rather than having to track which driver was originally bound to the driver, a mangement tool can simply: Guest uses device Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | | | | | Merge branch 'master' into nextJames Morris2009-03-242-1/+44
|\ \ \ \ \ \ | |/ / / / /
| * | | | | Merge branch 'for-linus' of ↵Linus Torvalds2009-02-261-0/+43
| |\ \ \ \ \ | | |_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: AMD 813x B2 devices do not need boot interrupt quirk PCI: Enable PCIe AER only after checking firmware support PCI: pciehp: Handle interrupts that happen during initialization. PCI: don't enable too many HT MSI mappings PCI: add some sysfs ABI docs PCI quirk: enable MSI on 8132
generated by cgit v1.1 at 2024-11-05 21:02:47 +0000