aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-mxc
Commit message (Collapse)AuthorAgeFilesLines
* ARM:imx:fix pwm period valueJason Chen2012-01-061-0/+9
| | | | | | | | | | | | | | commit 5776ac2eb33164c77cdb4d2b48feee15616eaba3 upstream. According to imx pwm RM, the real period value should be PERIOD value in PWMPR plus 2. PWMO (Hz) = PCLK(Hz) / (period +2) Signed-off-by: Jason Chen <jason.chen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* MXC PWM: should active during DOZE/WAIT/DBG modeJason Chen2012-01-061-1/+6
| | | | | | | | | commit c0d96aed8c6dd925afe9ea35491a0cd458642a86 upstream. Signed-off-by: Jason Chen <jason.chen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desiredPaul Fertser2011-11-111-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | commit 6571534b600b8ca1936ff5630b9e0947f21faf16 upstream. To configure pads during the initialisation a set of special constants is used, e.g. #define MX25_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP) The problem is that no pull-up/down is getting activated unless both PAD_CTL_PUE (pull-up enable) and PAD_CTL_PKE (pull/keeper module enable) set. This is clearly stated in the i.MX25 datasheet and is confirmed by the measurements on hardware. This leads to some rather hard to understand bugs such as misdetecting an absent ethernet PHY (a real bug i had), unstable data transfer etc. This might affect mx25, mx35, mx50, mx51 and mx53 SoCs. It's reasonable to expect that if the pullup value is specified, the intention was to have it actually active, so we implicitly add the needed bits. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* MXC: iomux-v3: correct NO_PAD_CTRL definitionTroy Kisky2011-10-031-1/+1
| | | | | | | | | | | | | | | | | | | | commit 425933b30b0ccfac58065bca6c853ea627443cdf upstream. iomux-v3.c uses NO_PAD_CTRL as a 32 bit value so it should not be shifted left by MUX_PAD_CTRL_SHIFT(41) Previously, anything requesting NO_PAD_CTRL would get their pad control register set to 0. Since it is a pad control mask, place it with the other mask values. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: John Ogness <john.ogness@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ARM: mx51/sdma: Check the chip revision in run-timeFabio Estevam2011-06-061-2/+4
| | | | | | | | | | | Check the MX51 chip revision in run-time so that the correct SDMA firmware can be loaded. While at it also remove the silicon revision from the sdma_script_start_addrs structure name for MX51. All the MX51 revisions share the same SDMA start addresses. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2011-05-2325-695/+255
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits) ARM: bcmring: convert to use sp804 clockevents ARM: bcmring: convert to sp804 clocksource ARM: 6912/1: bcmring: Add clkdev table in init_early clockevents: ARM sp804: obtain sp804 timer rate via clks clockevents: ARM sp804: allow clockevent name to be specified clocksource: ARM sp804: obtain sp804 timer rate via clks clocksource: ARM sp804: allow clocksource name to be specified clocksource: convert OMAP1 to 32-bit down counting clocksource clocksource: convert MXS timrotv2 to 32-bit down counting clocksource clocksource: convert SPEAr platforms 16-bit up counting clocksource clocksource: convert Integrator/AP 16-bit down counting clocksource clocksource: convert W90x900 24-bit down counting clocksource clocksource: convert ARM 32-bit down counting clocksources clocksource: convert ARM 32-bit up counting clocksources clocksource: add common mmio clocksource ARM: update sa1100 to reflect PXA updates ARM: omap1: convert to using readl/writel instead of volatile struct ARM: omap1: delete useless interrupt handler ARM: s5p: consolidate selection of timer register ARM: 6939/1: fix missing 'cpu_relax()' declaration ...
| * Merge branch 'devel-stable' into for-linusRussell King2011-05-2324-648/+246
| |\ | | | | | | | | | | | | | | | Conflicts: arch/arm/Kconfig arch/arm/mach-ns9xxx/include/mach/uncompress.h
| | * Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King2011-05-2023-647/+245
| | |\ | | | | | | | | | | | | devel-stable
| | | * ARM: imx: move mx3 support to mach-imxUwe Kleine-König2011-05-191-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixing a few "please, no space before tabs" and "empty line at end of file" warnings on the way. LAKML-Reference: 1299271882-2130-6-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * ARM: imx: remove some deprecated and unused #definesUwe Kleine-König2011-05-191-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | LAKML-Reference: 1302464943-20721-6-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * ARM: mx3: make ioremap quirk ready for multi-SoC kernelsUwe Kleine-König2011-05-192-10/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To be able to compile e.g. i.MX31 and i.MX51 in a single kernel image the ioremap quirk needs a runtime check. While touching this code make the comment more understandable by adding a sentence from the commit log that introduced it (eadefef ([ARM] MX3: Use ioremap wrapper to map SoC devices nonshared)). As mach/io.h now uses cpu_is_ some header reshuffling in mach/hardware.h was necessary. (mach/mx27.h and mach/mx31.h #include <linux/io.h> which #includes <mach/io.h>. So mach/mxc.h which provides the cpu_is_ macros needs to be included before mach/mx27.h and mach/mx31.h.) LAKML-Reference: 1302464943-20721-5-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * ARM: mxc: don't allow to compile together i.MX51 and i.MX53Uwe Kleine-König2011-05-191-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The two SoCs have different PHYS_OFFSETs so it's not (yet) possible to compile a single (working) kernel for these. LAKML-Reference: 1302464943-20721-4-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * ARM: mxc: don't use the symbols in the CPU family choice to select othersUwe Kleine-König2011-05-191-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The symbols in this choice should only be used to select between the available machines that can be built into a single kernel. As these sets (will) differ e.g. depending on ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR letting them select other symbols makes the logic more complex and needs to duplicate some things. So let the machines select the corresponding symbols (indirectly via SOC_XYZ). LAKML-Reference: 1302464943-20721-2-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * ARM: remove support for mxc91231Uwe Kleine-König2011-05-1913-608/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since support for mxc91231 was introduced 2009 it only saw patches that were part of (mxc or arm) global cleanups. The only supported machine only had 4 devices (2x UART, sdhc, watchdog). Cc: Dmitriy Taychenachev <dimichxp@gmail.com> LAKML-Reference: 1302211482-17926-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * video i.MX: remove mx1 compile time dependenciesSascha Hauer2011-05-191-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | remove usage of CONFIG_ARCH_MX1. It's mostly unused anyway, replace it with cpu_is_mx1() where necessary. Also, depend on IMX_HAVE_PLATFORM_IMX_FB instead of the architectures directly. LAKML-Reference: 20110303141244.GQ29521@pengutronix.de Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * ARM: imx51: use platform id 2 for imx51-cspiUwe Kleine-König2011-05-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The platform id is used to determine the spi bus number, so it should better be different to the ids used for imx51-ecspi. Otherwise it's not possible to use both devices "imx51-cspi.0" and "imx51-ecspi.0". Alternative approaches are to use dynamic bus numbering as offered by the spi framework or let the machine code set the bus number. The downside of both possibilities is that the bus number isn't fixed for the same busses on different machines using i.MX51. LAKML-Reference: 1302100716-21034-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * ARM: mx3: dynamically allocate "ipu-core" devicesUwe Kleine-König2011-05-194-0/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ... together with the related devices "mx3_camera" and "mx3_sdc_fb". "mx3_camera" doesn't fit the scheme of the other devices that just are allocated and registered in a single function because it needs additional care to get some dmaable memory. So currently imx31_alloc_mx3_camera duplicates most of imx_add_platform_device_dmamask, but I'm not sure it's worth to split the latter to be able to reuse more code. This gets rid of mach-mx3/devices.[ch] and so several files need to be adapted not to #include devices.h anymore. LAKML-Reference: 1299271882-2130-5-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * ARM: mx3: dynamically allocate "mxc_rtc" devicesUwe Kleine-König2011-05-194-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | LAKML-Reference: 1299271882-2130-2-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * ARM: imx/mx25: add NAND chip select pins to iomuxBaruch Siach2011-05-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Baruch Siach <baruch@tkos.co.il> LAKML-Reference: cae1d71db47204ee2654eca7391cb656ed53566b.1300095569.git.baruch@tkos.co.il Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * ARM: mx27: fix gpt4/5 base addressWolfram Sang2011-05-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reported-by: Igor Trevisan <igt1972@gmail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> LAKML-Reference: 1299786904-5494-1-git-send-email-w.sang@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * ARM: mx53: Print silicon revision on bootFabio Estevam2011-05-192-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Having the silicon revision to appear on the boot log is a useful information. MX31, MX35 and MX51 already show the silicon revision on boot. Add support for displaying such information for MX53 as well. Tested on a mx53loco board, where it shows: CPU identified as i.MX53, silicon rev 2.0 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> LAKML-Reference: 1301068367-18937-1-git-send-email-fabio.estevam@freescale.com Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | Merge branch 'zImage_fixes' of git://git.linaro.org/people/nico/linux into ↵Russell King2011-05-071-1/+1
| | |\ \ | | | | | | | | | | | | | | | devel-stable
| | | * | ARM: zImage: remove the static qualifier from global data variablesNicolas Pitre2011-05-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To be able to relocate the .bss section at run time independently from the rest of the code, we must make sure that no GOTOFF relocations are used with .bss symbols. This usually means that no global variables can be marked static unless they're also const. Let's remove the static qualifier from current offenders, or turn them into const variables when possible. Next commit will ensure the build fails if one of those is reintroduced due to otherwise enforced coding standards for the kernel. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com>
| * | | | clocksource: convert ARM 32-bit down counting clocksourcesRussell King2011-05-231-16/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert SP804, MXC, Nomadik and Orion 32-bit down-counting clocksources to generic mmio clocksource infrastructure. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Lennert Buytenhek <kernel@wantstofly.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | clocksource: convert ARM 32-bit up counting clocksourcesRussell King2011-05-231-31/+7
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert ixp4xx, lpc32xx, mxc, netx, pxa, sa1100, tcc8k, tegra and u300 to use the generic mmio clocksource recently introduced. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: "Hans J. Koch" <hjk@hansjkoch.de> Acked-by: Colin Cross <ccross@android.com> Cc: Erik Gilling <konkers@android.com> Cc: Olof Johansson <olof@lixom.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2011-05-231-2/+2
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) b43: fix comment typo reqest -> request Haavard Skinnemoen has left Atmel cris: typo in mach-fs Makefile Kconfig: fix copy/paste-ism for dell-wmi-aio driver doc: timers-howto: fix a typo ("unsgined") perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course'). treewide: fix a few typos in comments regulator: change debug statement be consistent with the style of the rest Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations" audit: acquire creds selectively to reduce atomic op overhead rtlwifi: don't touch with treewide double semicolon removal treewide: cleanup continuations and remove logging message whitespace ath9k_hw: don't touch with treewide double semicolon removal include/linux/leds-regulator.h: fix syntax in example code tty: fix typo in descripton of tty_termios_encode_baud_rate xtensa: remove obsolete BKL kernel option from defconfig m68k: fix comment typo 'occcured' arch:Kconfig.locks Remove unused config option. treewide: remove extra semicolons ...
| * | | treewide: cleanup continuations and remove logging message whitespaceJoe Perches2011-04-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using C line continuation inside format strings is error prone. Clean up the unintended whitespace introduced by misuse of \. Neaten correctly used line continations as well for consistency. drivers/scsi/arcmsr/arcmsr_hba.c has these errors as well, but arcmsr needs a lot more work and the driver should likely be moved to staging instead. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into fixesRussell King2011-04-272-0/+9
|\ \ \ \ | |/ / / |/| | |
| * | | ARM: mxc: Add missing lockdep annotationThomas Gleixner2011-04-121-0/+7
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The irq_set_wake() function of the gpio irq_chip calls enable/disable_irq_wake() on the demultiplex interrupt. That leads to a lockdep warning "INFO: possible recursive locking detected" because irq_set_type() is called under irq_desc->lock and the *_irq_wake() calls take irq_desc->lock of the demux interrupt. Tell lockdep that the gpio irqs are in a different lock class. Documentation/SubmitChecklist: 15: All codepaths have been exercised with all lockdep features enabled. That's a non-optional requirement, AFAICT. Reported-and-tested-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LAKML-Reference: alpine.LFD.2.00.1104041416290.19945@localhost6.localdomain6 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | ARM: mxc: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNELDave Martin2011-04-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> LAKML-Reference: 1289913217-8672-1-git-send-email-dave.martin@linaro.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | | Fix common misspellingsLucas De Marchi2011-03-313-4/+4
|/ / | | | | | | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* | Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2011-03-309-11/+74
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (65 commits) ARM: 6826/1: Merge v6 and v7 DEBUG_LL DCC support ARM: 6838/1: etm: fix section mismatch warning ARM: 6837/1: remove unused pci_fixup_prpmc1100 ARM: 6836/1: kprobes/fix emulation of LDR/STR instruction when Rn == PC Fix the broken build for Marvell Dove platform. ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency ARM: 6834/1: perf: reset counters on all CPUs during initialisation ARM: 6833/1: perf: add required isbs() to ARMv7 backend ARM: 6825/1: kernel/sleep.S: fix Thumb2 compilation issues ARM: 6807/1: realview: Fix secondary GIC initialisation for EB with MPCore tile arm: mach-mx3: pcm043: add write-protect and card-detect for SD1 eukrea_mbimxsd51: add SD Card detect eukrea_mbimxsd25-baseboard: add SD card detect mx3/eukrea_mbimxsd-baseboard: add SD card detect support mx3/eukrea_mbimxsd-baseboard: fix gpio request ARM: mxs/mx28evk: add mmc device ARM: mxs/mx23evk: add mmc device ARM: mxs: dynamically allocate mmc device ARM: mx51_efika: update platform data for new mfd changes mx2/iomux: Set direction for CSPI2 pins ...
| * mx2/iomux: Set direction for CSPI2 pinsJulien Boibessot2011-03-251-6/+6
| | | | | | | | | | Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: mx51: Implement code to allow mx51 to enter WFIDinh Nguyen2011-03-232-1/+14
| | | | | | | | | | | | | | | | | | | | Implement code for MX51 that allows the SoC to enter WFI when arch_idle is called. This patch is also necessary for correctly suspending the system. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: mx50: Add support to get the silicon revisionDinh Nguyen2011-03-231-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | For MX50, the HW_ADADIG_DIGPROG register in the ANATOP module will have the correct silicon revision: Major Minor Description 0x50 0x0 TO1.0 0x50 0x1 TO1.1 Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: mxc: fix buggy '.end' of IORESOURCE_MEM in device codesShawn Guo2011-03-232-2/+2
| | | | | | | | | | | | | | Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * MX51: Add AUDMUX ports definitionsJulien Boibessot2011-03-231-1/+9
| | | | | | | | | | Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: mxc: Add sched_clock to mxc platformJan Weitzel2011-03-231-0/+16
| | | | | | | | | | | | | | | | | | Add sched_clock using cyc_to_sched_clock and update_sched_clock with HAVE_SCHED_CLOCK tested on iMX27 and iMX35 Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: mxc: Add dummy_get_cycles to avoid access before init is doneJan Weitzel2011-03-231-1/+8
| | | | | | | | | | | | | | | | this is needed to use get_cycles with sched_clock. Accessing timer without enabled clk will result in crash Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: mx51: Print silicon revision on bootFabio Estevam2011-03-232-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Having the silicon revision to appear on the boot log is a useful information. MX31 and MX35 already show the silicon revision on boot. Add support for displaying such information for MX51 as well. Tested on a MX51EVK, where it shows: CPU identified as i.MX51, silicon rev 3.0 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | arm: Fold irq_set_chip/irq_set_handlerThomas Gleixner2011-03-294-8/+7
| | | | | | | | | | | | Use irq_set_chip_and_handler() instead. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | arm: Cleanup the irq namespaceThomas Gleixner2011-03-295-21/+23
| | | | | | | | | | | | Convert to the new function names. Automated with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | arm: mxc: Use generic_handle_irq()Thomas Gleixner2011-03-291-6/+1
|/ | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-03-181-1/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits) mmc: dw_mmc: support mmc power control with regulator mmc: dw_mmc: fix suspend/resume operation mmc: dw_mmc: add quirks for unreliable card detect, and capabilities mmc: tmio: fix address in kunmap_atomic() calls mmc: core: reset card voltage after power off mmc: core: export function mmc_do_release_host() mmc: sdio: remember new card RCA when redetecting card mmc: dw_mmc: Remove set-but-unused variable. mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35 mmc: sdhci-esdhc: broken card detection is not a default quirk mmc: sdhci-esdhc-imx: add write protect on custom GPIO on mx25/35 mmc: msm_sdcc: remove needless cache flush after dma_unmap_sg() mmc: sh_mmcif: support aggressive clock gating mmc: check if mmc cards < 2GB do sector addressing mmc: core: comment on why sdio_reset is done at init time mmc: dw_mmc: support DDR mode mmc: via-sdmmc: Remove set-but-unused variable. mmc: cb710: Return err value in cb710_wait_while_busy() mmc: sdhci-pci: Remove set-but-unused variable. mmc: mxs-mmc: add mmc host driver for i.MX23/28 ...
| * mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35Wolfram Sang2011-03-171-0/+2
| | | | | | | | | | | | | | Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Marc Reilly <marc@cpdesign.com.au> Tested-by: Eric Benard <eric@eukrea.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: sdhci-esdhc-imx: add write protect on custom GPIO on mx25/35Wolfram Sang2011-03-171-1/+9
| | | | | | | | | | | | | | Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Marc Reilly <marc@cpdesign.com.au> Tested-by: Eric Benard <eric@eukrea.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2011-03-1729-873/+2522
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
| * | mx51 enchance the sd/mmc HW timing compatibility on mx51 boards.Richard Zhu2011-03-101-20/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some cards have the CRC errors in read on mx51 BBG board. Configure the eSDHC pad configurations to level up the compatibility to fix this issue. Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Tested-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | ARM: mxc91231: select MXC_AVICUwe Kleine-König2011-03-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes: arch/arm/kernel/built-in.o: In function `__irq_svc': io.c:(.text+0x2e0): undefined reference to `avic_base' arch/arm/kernel/built-in.o: In function `__irq_usr': io.c:(.text+0x4c8): undefined reference to `avic_base' arch/arm/mach-mxc91231/built-in.o: In function `mxc91231_init_irq': magx-zn5.c:(.init.text+0x18): undefined reference to `mxc_init_irq' and was broken by c7259df (ARM i.MX irq: Compile avic irq code only on SoCs that need it) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | ARM: imx3x: clean up ARCH_MX3XRichard Zhao2011-03-072-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move to SOC_SOC_IMX3X. Leave ARCH_MX31/35 definitions there, in case some place prevent multi-soc single image. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.1 at 2024-05-15 08:31:05 +0000