aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc
Commit message (Collapse)AuthorAgeFilesLines
* merged 3.0.101 tagWolfgang Wiedmeyer2015-10-221-1/+1
|
* smdk4412: remove some logging I addedsbrissen2013-12-161-1/+0
| | | | Change-Id: I264ee04c7c6726e68cdd186f22ab45dc8bf5be0f
* mshci: disable MMC_CAP_ERASE on u1Daniel Hillenbrand2013-08-101-0/+4
| | | | Change-Id: I944a80e4ffd9d7b86b18a13534a3fa8fd2104934
* mmc: fix the workqueue overload battery wasteAndrea Arcangeli2013-08-041-2/+2
| | | | | | | | | | | | | | | | After switching to the smdk4412 kernel I noticed a workqueue overload, battery lasting less, and Android OS showing up at the top as result. Tracing showed that mmc_host_clk_gate_work was one of the runqueues called regularly in the background. The #ifdef is clearly reversed and that leads to the ndelay being called every time, while ndelay was never called before. Not yet sure if this fixes the "apparent" regression but it's not bad so far, after 1h of uptime android OS is below Android System. Change-Id: Ief78ed7ddb3eec85636844b9a730cac832b096b4
* d710: initial support for the Epic 4G Touch (SPH-D710)Dorian Snyder2013-06-2011-20/+415
| | | | Change-Id: Iafbd9fb45253b02d539ac0ba114f57b3bf9eeed4
* smdk4412: bulk update from i9300 update 9Daniel Hillenbrand2013-06-047-60/+252
| | | | Change-Id: Icd3e7b601f3f4c8b3dcf053fed5819fb7caf5296
* Merge remote-tracking branch 'kernelorg/linux-3.0.y' into 3_0_64Andrew Dodd2013-02-278-14/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/Kconfig arch/arm/include/asm/hwcap.h arch/arm/kernel/smp.c arch/arm/plat-samsung/adc.c drivers/gpu/drm/i915/i915_reg.h drivers/gpu/drm/i915/intel_drv.h drivers/mmc/core/sd.c drivers/net/tun.c drivers/net/usb/usbnet.c drivers/regulator/max8997.c drivers/usb/core/hub.c drivers/usb/host/xhci.h drivers/usb/serial/qcserial.c fs/jbd2/transaction.c include/linux/migrate.h kernel/sys.c kernel/time/timekeeping.c lib/genalloc.c mm/memory-failure.c mm/memory_hotplug.c mm/mempolicy.c mm/page_alloc.c mm/vmalloc.c mm/vmscan.c mm/vmstat.c scripts/Kbuild.include Change-Id: I91e2d85c07320c7ccfc04cf98a448e89bed6ade6
| * mmc: sdhci-s3c: fix the wrong number of max bus clocksJaehoon Chung2012-12-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5feb54a1ab91a237e247c013b8c4fb100ea347b1 upstream. We can use up to four bus-clocks; but on module remove, we didn't disable the fourth bus clock. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mmc: Prevent 1.8V switch for SD hosts that don't support UHS modes.Al Cooper2012-10-021-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4188bba0e9e7ba58d231b528df495666f2742b74 upstream. The driver should not try to switch to 1.8V when the SD 3.0 host controller does not have any UHS capabilities bits set (SDR50, DDR50 or SDR104). See page 72 of "SD Specifications Part A2 SD Host Controller Simplified Specification Version 3.00" under "1.8V Signaling Enable". Instead of setting SDR12 and SDR25 in the host capabilities data structure for all V3.0 host controllers, only set them if SDR104, SDR50 or DDR50 is set in the host capabilities register. This will prevent the switch to 1.8V later. Signed-off-by: Al Cooper <acooper@gmail.com> Acked-by: Arindam Nath <arindam.nath@amd.com> Acked-by: Philip Rakity <prakity@marvell.com> Acked-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mmc: sd: Handle SD3.0 cards not supporting UHS-I bus speed modeSubhash Jadavani2012-10-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f2815f68dabbb373fd1c9f0fd4a609d486697c2b upstream. Here is Essential conditions to indicate Version 3.00 Card (SD_SPEC=2 and SD_SPEC3=1) : (1) The card shall support CMD6 (2) The card shall support CMD8 (3) The card shall support CMD42 (4) User area capacity shall be up to 2GB (SDSC) or 32GB (SDHC) User area capacity shall be more than or equal to 32GB and up to 2TB (SDXC) (5) Speed Class shall be supported (SDHC or SDXC) So even if SD card doesn't support any of the newly defined UHS-I bus speed mode, it can advertise itself as SD3.0 cards as long as it supports all the essential conditions of SD3.0 cards. Given this, these type of cards should atleast run in High Speed mode @50MHZ if it supports HS. But current initialization sequence for SD3.0 cards is such that these non-UHS-I SD3.0 cards runs in Default Speed mode @25MHz. This patch makes sure that these non-UHS-I SD3.0 cards run in High Speed Mode @50MHz. Tested this patch with SanDisk Extreme SDHC 8GB Class 10 card. Reported-by: "Hiremath, Vaibhav" <hvaibhav@ti.com> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: sdhci-esdhc: break out early if clock is 0Shawn Guo2012-10-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 74f330bceaa7b88d06062e1cac3d519a3dfc041e upstream. Since commit 30832ab56 ("mmc: sdhci: Always pass clock request value zero to set_clock host op") was merged, esdhc_set_clock starts hitting "if (clock == 0)" where ESDHC_SYSTEM_CONTROL has been operated. This causes SDHCI card-detection function being broken. Fix the regression by moving "if (clock == 0)" above ESDHC_SYSTEM_CONTROL operation. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mmc: mxs-mmc: fix deadlock in SDIO IRQ caseLauri Hintsala2012-10-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1af36b2a993dddfa3d6860ec4879c9e8abc9b976 upstream. Release the lock before mmc_signal_sdio_irq is called by mxs_mmc_irq_handler. Backtrace: [ 79.660000] ============================================= [ 79.660000] [ INFO: possible recursive locking detected ] [ 79.660000] 3.4.0-00009-g3e96082-dirty #11 Not tainted [ 79.660000] --------------------------------------------- [ 79.660000] swapper/0 is trying to acquire lock: [ 79.660000] (&(&host->lock)->rlock#2){-.....}, at: [<c026ea3c>] mxs_mmc_enable_sdio_irq+0x18/0xd4 [ 79.660000] [ 79.660000] but task is already holding lock: [ 79.660000] (&(&host->lock)->rlock#2){-.....}, at: [<c026f744>] mxs_mmc_irq_handler+0x1c/0xe8 [ 79.660000] [ 79.660000] other info that might help us debug this: [ 79.660000] Possible unsafe locking scenario: [ 79.660000] [ 79.660000] CPU0 [ 79.660000] ---- [ 79.660000] lock(&(&host->lock)->rlock#2); [ 79.660000] lock(&(&host->lock)->rlock#2); [ 79.660000] [ 79.660000] *** DEADLOCK *** [ 79.660000] [ 79.660000] May be due to missing lock nesting notation [ 79.660000] [ 79.660000] 1 lock held by swapper/0: [ 79.660000] #0: (&(&host->lock)->rlock#2){-.....}, at: [<c026f744>] mxs_mmc_irq_handler+0x1c/0xe8 [ 79.660000] [ 79.660000] stack backtrace: [ 79.660000] [<c0014bd0>] (unwind_backtrace+0x0/0xf4) from [<c005f9c0>] (__lock_acquire+0x1948/0x1d48) [ 79.660000] [<c005f9c0>] (__lock_acquire+0x1948/0x1d48) from [<c005fea0>] (lock_acquire+0xe0/0xf8) [ 79.660000] [<c005fea0>] (lock_acquire+0xe0/0xf8) from [<c03a8460>] (_raw_spin_lock_irqsave+0x44/0x58) [ 79.660000] [<c03a8460>] (_raw_spin_lock_irqsave+0x44/0x58) from [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4) [ 79.660000] [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4) from [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8) [ 79.660000] [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8) from [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254) [ 79.660000] [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254) from [<c006bff8>] (handle_irq_event+0x3c/0x5c) [ 79.660000] [<c006bff8>] (handle_irq_event+0x3c/0x5c) from [<c006e6d0>] (handle_level_irq+0x90/0x110) [ 79.660000] [<c006e6d0>] (handle_level_irq+0x90/0x110) from [<c006b930>] (generic_handle_irq+0x38/0x50) [ 79.660000] [<c006b930>] (generic_handle_irq+0x38/0x50) from [<c00102fc>] (handle_IRQ+0x30/0x84) [ 79.660000] [<c00102fc>] (handle_IRQ+0x30/0x84) from [<c000f058>] (__irq_svc+0x38/0x60) [ 79.660000] [<c000f058>] (__irq_svc+0x38/0x60) from [<c0010520>] (default_idle+0x2c/0x40) [ 79.660000] [<c0010520>] (default_idle+0x2c/0x40) from [<c0010a90>] (cpu_idle+0x64/0xcc) [ 79.660000] [<c0010a90>] (cpu_idle+0x64/0xcc) from [<c04ff858>] (start_kernel+0x244/0x2c8) [ 79.660000] BUG: spinlock lockup on CPU#0, swapper/0 [ 79.660000] lock: c398cb2c, .magic: dead4ead, .owner: swapper/0, .owner_cpu: 0 [ 79.660000] [<c0014bd0>] (unwind_backtrace+0x0/0xf4) from [<c01ddb1c>] (do_raw_spin_lock+0xf0/0x144) [ 79.660000] [<c01ddb1c>] (do_raw_spin_lock+0xf0/0x144) from [<c03a8468>] (_raw_spin_lock_irqsave+0x4c/0x58) [ 79.660000] [<c03a8468>] (_raw_spin_lock_irqsave+0x4c/0x58) from [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4) [ 79.660000] [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4) from [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8) [ 79.660000] [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8) from [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254) [ 79.660000] [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254) from [<c006bff8>] (handle_irq_event+0x3c/0x5c) [ 79.660000] [<c006bff8>] (handle_irq_event+0x3c/0x5c) from [<c006e6d0>] (handle_level_irq+0x90/0x110) [ 79.660000] [<c006e6d0>] (handle_level_irq+0x90/0x110) from [<c006b930>] (generic_handle_irq+0x38/0x50) [ 79.660000] [<c006b930>] (generic_handle_irq+0x38/0x50) from [<c00102fc>] (handle_IRQ+0x30/0x84) [ 79.660000] [<c00102fc>] (handle_IRQ+0x30/0x84) from [<c000f058>] (__irq_svc+0x38/0x60) [ 79.660000] [<c000f058>] (__irq_svc+0x38/0x60) from [<c0010520>] (default_idle+0x2c/0x40) [ 79.660000] [<c0010520>] (default_idle+0x2c/0x40) from [<c0010a90>] (cpu_idle+0x64/0xcc) [ 79.660000] [<c0010a90>] (cpu_idle+0x64/0xcc) from [<c04ff858>] (start_kernel+0x244/0x2c8) Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mmc: sdhci-pci: CaFe has broken card detectionDaniel Drake2012-08-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 55fc05b7414274f17795cd0e8a3b1546f3649d5e upstream. At http://dev.laptop.org/ticket/11980 we have determined that the Marvell CaFe SDHCI controller reports bad card presence during resume. It reports that no card is present even when it is. This is a regression -- resume worked back around 2.6.37. Around 400ms after resuming, a "card inserted" interrupt is generated, at which point it starts reporting presence. Work around this hardware oddity by setting the SDHCI_QUIRK_BROKEN_CARD_DETECTION flag. Thanks to Chris Ball for helping with diagnosis. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mmc: sdio: avoid spurious calls to interrupt handlersNicolas Pitre2012-06-012-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit bbbc4c4d8c5face097d695f9bf3a39647ba6b7e7 upstream. Commit 06e8935feb ("optimized SDIO IRQ handling for single irq") introduced some spurious calls to SDIO function interrupt handlers, such as when the SDIO IRQ thread is started, or the safety check performed upon a system resume. Let's add a flag to perform the optimization only when a real interrupt is signaled by the host driver and we know there is no point confirming it. Reported-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | mmc: Soft-patch MoviNAND VTU00M (16GB) eMMC failureSamsung OSRC2013-01-082-0/+235
| | | | | | | | Signed-off-by: Andrei F <luxneb@gmail.com>
* | mmc: Enable support for Triangle AwayAlan Orth2012-11-181-0/+3
| | | | | | | | | | | | | | | | Exposes /dev/block/mmcblk0boot0 and /dev/block/mmcblk0boot1, where the custom binary flash count is stored. Re-exposing these enables the use of utilities like Triangle Away to reset the counter. Change-Id: I4a6d4784075b4f993c7e0be4a4b7890356104ca5
* | merge opensource jb u5codeworkx2012-09-2213-51/+171
| | | | | | | | Change-Id: I1aaec157aa196f3448eff8636134fce89a814cf2
* | Merge linux-3.0.31 from korg into jellybeancodeworkx2012-09-187-52/+71
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mm/proc-v7.S drivers/base/core.c drivers/gpu/drm/i915/i915_gem_execbuffer.c drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_lvds.c drivers/gpu/drm/radeon/evergreen.c drivers/gpu/drm/radeon/r100.c drivers/gpu/drm/radeon/radeon_connectors.c drivers/gpu/drm/radeon/rs600.c drivers/usb/core/hub.c drivers/usb/host/xhci-pci.c drivers/usb/host/xhci.c drivers/usb/serial/qcserial.c fs/proc/base.c Change-Id: Ia98b35db3f8c0bfd95817867d3acb85be8e5e772
| * mmc: unbreak sdhci-esdhc-imx on i.MX25Eric Bénard2012-05-071-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b89152824f993a9572b47eb31f4579feadeac34c upstream. This was broken by me in 37865fe91582582a6f6c00652f6a2b1ff71f8a78 ("mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci") where more extensive tests would have shown that read or write of data to the card were failing (even if the partition table was correctly read). Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mmc: atmel-mci: correct data timeout computationLudovic Desroches2012-04-131-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 66292ad92c6d3f2f1c137a1c826b331ca8595dfd upstream. The HSMCI operates at a rate of up to Master Clock divided by two. Moreover previous calculation can cause overflows and so wrong timeouts. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5Sascha Hauer2012-03-121-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5b6b0ad6e572b32a641116aaa5f897ffebe31e44 upstream. On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION command. This works for SD cards. However, with MMC cards the MMC_SET_BLOCK_COUNT command is used instead, but this needs the same handling. Fix MMC cards by testing for the MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53 board with a Transcend MMC+ card and eMMC. The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this is a regression for these boards introduced in 3.0; it should go to 3.0/3.1/3.2-stable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mmc: core: check for zero length ioctl dataJohan Rudholm2012-02-291-37/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4d6144de8ba263eb3691a737c547e5b2fdc45287 upstream. If the read or write buffer size associated with the command sent through the mmc_blk_ioctl is zero, do not prepare data buffer. This enables a ioctl(2) call to for instance send a MMC_SWITCH to set a byte in the ext_csd. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mmc: sd: Fix SDR12 timing regressionAlexander Elbs2012-01-251-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit dd8df17fe83483d7ea06ff229895e35a42071599 upstream. This patch fixes a failure to recognize SD cards reported on a Dell Vostro with O2 Micro SD card reader. Patch 49c468f ("mmc: sd: add support for uhs bus speed mode selection") caused the problem, by setting the SDHCI_CTRL_HISPD flag even for legacy timings. Signed-off-by: Alexander Elbs <alex@segv.de> Acked-by: Philip Rakity <prakity@marvell.com> Acked-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * mmc: sdhci: Fix tuning timer incorrect setting when suspending hostAaron Lu2012-01-251-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c6ced0db08010ed75df221a2946c5228454b38d5 upstream. When suspending host, the tuning timer shoule be deactivated. And the HOST_NEEDS_TUNING flag should be set after tuning timer is deactivated. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Aaron Lu <aaron.lu@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * mmc: core: Fix voltage select in DDR modeGirish K S2012-01-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 913047e9e5787a90696533a9f109552b7694ecc9 upstream. This patch fixes the wrong comparison before setting the interface voltage in DDR mode. The assignment to the variable ddr before comaprison is either ddr = MMC_1_2V_DDR_MODE; or ddr == MMC_1_8V_DDR_MODE. But the comparison is done with the extended csd value if ddr == EXT_CSD_CARD_TYPE_DDR_1_2V. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * ARM: 7220/1: mmc: mmci: Fixup error handling for dmaUlf Hansson2012-01-061-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3b6e3c73851a9a4b0e6ed9d378206341dd65e8a5 upstream. When getting a cmd irq during an ongoing data transfer with dma, the dma job were never terminated. This is now corrected. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * ARM: 7214/1: mmc: mmci: Fixup handling of MCI_STARTBITERRUlf Hansson2012-01-061-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | commit b63038d6f4ca5d1849ce01d9fc5bb9cb426dec73 upstream. The interrupt was previously enabled and then correctly cleared. Now we also handle it correctly. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * mmc: vub300: fix type of firmware_rom_wait_states module parameterRusty Russell2012-01-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | commit 61074287c2965edf0fc75b54ae8f4ce99f182669 upstream. You didn't mean this to be a bool. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | samsung opensource update4codeworkx2012-08-032-5/+10
| | | | | | | | Change-Id: I9db25f213bb1577c4468873c66b230a0566b6cf2
* | samsung opensource update3Daniel Hillenbrand2012-07-217-106/+117
| |
* | samsung update 1codeworkx2012-06-0234-734/+8993
|/
* mmc: mxcmmc: fix falling back to PIOSascha Hauer2011-12-211-0/+1
| | | | | | | | | | | | | | | commit e58f516ff4730c4047c3f104b061f7a03e9a263c upstream. When we can't configure the dma channel we want to fall back to PIO. We do this by setting host->do_dma to zero. This does not work as do_dma is used to see whether dma can be used for the current transfer. Instead, we have to set host->dma to NULL. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mmc: core: ext_csd.raw_* used in comparison but never setAndrei Warkentin2011-11-111-0/+2
| | | | | | | | | | | | | | | | | commit 5238acbe36dd5100fb6b035a995ae5fc89dd0708 upstream. f39b2dd9d ("mmc: core: Bus width testing needs to handle suspend/resume") added code to only compare read-only ext_csd fields in bus width testing code, yet it's comparing some fields that are never set. The affected fields are ext_csd.raw_erased_mem_count and ext_csd.raw_partition_support. Signed-off-by: Andrei Warkentin <andrey.warkentin@gmail.com> Acked-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mmc: core: Fix hangs related to insert/remove of cardsUlf Hansson2011-11-115-5/+9
| | | | | | | | | | | | | | | | | | | | | | commit 7f7e4129c23f0419257184dff6fec89d2d5a8964 upstream. During a rescan operation mmc_attach(sd|mmc|sdio) functions are called. The error handling in these function can trigger a detach of the bus, which also meant a power off. This is not notified by the rescan operation which then continues to the next attach function. If a power off has been done, the framework must never send any new commands to the host driver, without first doing a new power up. This will most likely trigger any host driver to hang. Moving power off out of detach and instead handle power off separately when it is actually needed, solves the issue. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mmc: mxs-mmc: fix clock rate settingKoen Beel2011-10-161-16/+14
| | | | | | | | | | | | | | | | | | | | commit d982dcdc4e64eb1881df44b0035a8268bf1ab067 upstream. Fix clock rate setting in the mxs-mmc driver. Previously, if div2 was 0 then the value for TIMING_CLOCK_RATE would have been 255 instead of 0. The limits for div1 (TIMING_CLOCK_DIVIDE) and div2 (TIMING_CLOCK_RATE+1) were also not correctly defined. Can easily be reproduced on mx23evk: default clock for high speed sdio cards is 50 MHz. With a SSP_CLK of 28.8 MHz default), this resulted in an actual clock rate of about 56 kHz. Tested on mx23evk. Signed-off-by: Koen Beel <koen.beel@barco.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mmc: sdhci-s3c: Fix mmc card I/O problemGirish K S2011-10-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | commit 49bb1e619568ec84785ceb366f07db2a6f0b64cc upstream. This patch fixes the problem in sdhci-s3c host driver for Samsung Soc's. During the card identification stage the mmc core driver enumerates for the best bus width in combination with the highest available data rate. It starts enumerating from the highest bus width (8) to lowest width (1). In case of few MMC cards the 4-bit bus enumeration fails and tries the 1-bit bus enumeration. When switched to 1-bit bus mode the host driver has to clear the previous bus width setting and apply the new setting. The current patch will clear the previous bus mode and apply the new mode setting. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mmc: core: use non-reentrant workqueue for clock gatingMika Westerberg2011-10-031-1/+1
| | | | | | | | | | | | | | | | | | commit 50a50f9248497484c678631a9c1a719f1aaeab79 upstream. The default multithread workqueue can cause the same work to be executed concurrently on a different CPUs. This isn't really suitable for clock gating as it might already gated the clock and gating it twice results both host->clk_old and host->ios.clock to be set to 0. To prevent this from happening we use system_nrt_wq instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mmc: core: prevent aggressive clock gating racing with ios updatesMika Westerberg2011-10-031-2/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 778e277cb82411c9002ca28ccbd216c4d9eb9158 upstream. We have seen at least two different races when clock gating kicks in in a middle of ios structure update. First one happens when ios->clock is changed outside of aggressive clock gating framework, for example via mmc_set_clock(). The race might happen when we run following code: mmc_set_ios(): ... if (ios->clock > 0) mmc_set_ungated(host); Now if gating kicks in right after the condition check we end up setting host->clk_gated to false even though we have just gated the clock. Next time a request is started we try to ungate and restore the clock in mmc_host_clk_hold(). However since we have host->clk_gated set to false the original clock is not restored. This eventually will cause the host controller to hang since its clock is disabled while we are trying to issue a request. For example on Intel Medfield platform we see: [ 13.818610] mmc2: Timeout waiting for hardware interrupt. [ 13.818698] sdhci: =========== REGISTER DUMP (mmc2)=========== [ 13.818753] sdhci: Sys addr: 0x00000000 | Version: 0x00008901 [ 13.818804] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [ 13.818853] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [ 13.818903] sdhci: Present: 0x1fff0000 | Host ctl: 0x00000001 [ 13.818951] sdhci: Power: 0x0000000d | Blk gap: 0x00000000 [ 13.819000] sdhci: Wake-up: 0x00000000 | Clock: 0x00000000 [ 13.819049] sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 [ 13.819098] sdhci: Int enab: 0x00ff00c3 | Sig enab: 0x00ff00c3 [ 13.819147] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 13.819196] sdhci: Caps: 0x6bee32b2 | Caps_1: 0x00000000 [ 13.819245] sdhci: Cmd: 0x00000000 | Max curr: 0x00000000 [ 13.819292] sdhci: Host ctl2: 0x00000000 [ 13.819331] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000 [ 13.819377] sdhci: =========================================== [ 13.919605] mmc2: Reset 0x2 never completed. and it never recovers. Second race might happen while running mmc_power_off(): static void mmc_power_off(struct mmc_host *host) { host->ios.clock = 0; host->ios.vdd = 0; [ clock gating kicks in here ] /* * Reset ocr mask to be the highest possible voltage supported for * this mmc host. This value will be used at next power up. */ host->ocr = 1 << (fls(host->ocr_avail) - 1); if (!mmc_host_is_spi(host)) { host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; host->ios.chip_select = MMC_CS_DONTCARE; } host->ios.power_mode = MMC_POWER_OFF; host->ios.bus_width = MMC_BUS_WIDTH_1; host->ios.timing = MMC_TIMING_LEGACY; mmc_set_ios(host); } If the clock gating worker kicks in while we are only partially updated the ios structure the host controller gets incomplete ios and might not work as supposed. Again on Intel Medfield platform we get: [ 4.185349] kernel BUG at drivers/mmc/host/sdhci.c:1155! [ 4.185422] invalid opcode: 0000 [#1] PREEMPT SMP [ 4.185509] Modules linked in: [ 4.185565] [ 4.185608] Pid: 4, comm: kworker/0:0 Not tainted 3.0.0+ #240 Intel Corporation Medfield/iCDKA [ 4.185742] EIP: 0060:[<c136364e>] EFLAGS: 00010083 CPU: 0 [ 4.185827] EIP is at sdhci_set_power+0x3e/0xd0 [ 4.185891] EAX: f5ff98e0 EBX: f5ff98e0 ECX: 00000000 EDX: 00000001 [ 4.185970] ESI: f5ff977c EDI: f5ff9904 EBP: f644fe98 ESP: f644fe94 [ 4.186049] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 4.186125] Process kworker/0:0 (pid: 4, ti=f644e000 task=f644c0e0 task.ti=f644e000) [ 4.186219] Stack: [ 4.186257] f5ff98e0 f644feb0 c1365173 00000282 f5ff9460 f5ff96e0 f5ff96e0 f644feec [ 4.186418] c1355bd8 f644c0e0 c1499c3d f5ff96e0 f644fed4 00000006 f5ff96e0 00000286 [ 4.186579] f644fedc c107922b f644feec 00000286 f5ff9460 f5ff9700 f644ff10 c135839e [ 4.186739] Call Trace: [ 4.186802] [<c1365173>] sdhci_set_ios+0x1c3/0x340 [ 4.186883] [<c1355bd8>] mmc_gate_clock+0x68/0x120 [ 4.186963] [<c1499c3d>] ? _raw_spin_unlock_irqrestore+0x4d/0x60 [ 4.187052] [<c107922b>] ? trace_hardirqs_on+0xb/0x10 [ 4.187134] [<c135839e>] mmc_host_clk_gate_delayed+0xbe/0x130 [ 4.187219] [<c105ec09>] ? process_one_work+0xf9/0x5b0 [ 4.187300] [<c135841d>] mmc_host_clk_gate_work+0xd/0x10 [ 4.187379] [<c105ec82>] process_one_work+0x172/0x5b0 [ 4.187457] [<c105ec09>] ? process_one_work+0xf9/0x5b0 [ 4.187538] [<c1358410>] ? mmc_host_clk_gate_delayed+0x130/0x130 [ 4.187625] [<c105f3c8>] worker_thread+0x118/0x330 [ 4.187700] [<c1496cee>] ? preempt_schedule+0x2e/0x50 [ 4.187779] [<c105f2b0>] ? rescuer_thread+0x1f0/0x1f0 [ 4.187857] [<c1062cf4>] kthread+0x74/0x80 [ 4.187931] [<c1062c80>] ? __init_kthread_worker+0x60/0x60 [ 4.188015] [<c149acfa>] kernel_thread_helper+0x6/0xd [ 4.188079] Code: 81 fa 00 00 04 00 0f 84 a7 00 00 00 7f 21 81 fa 80 00 00 00 0f 84 92 00 00 00 81 fa 00 00 0 [ 4.188780] EIP: [<c136364e>] sdhci_set_power+0x3e/0xd0 SS:ESP 0068:f644fe94 [ 4.188898] ---[ end trace a7b23eecc71777e4 ]--- This BUG() comes from the fact that ios.power_mode was still in previous value (MMC_POWER_ON) and ios.vdd was set to zero. We prevent these by inhibiting the clock gating while we update the ios structure. Both problems can be reproduced by simply running the device in a reboot loop. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mmc: rename mmc_host_clk_{ungate|gate} to mmc_host_clk_{hold|release}Mika Westerberg2011-10-033-11/+11
| | | | | | | | | | | | | | | | | | | | | | | commit 08c14071fda4e69abb9d5b1566651cd092b158d3 upstream. As per suggestion by Linus Walleij: > If you think the names of the functions are confusing then > you may rename them, say like this: > > mmc_host_clk_ungate() -> mmc_host_clk_hold() > mmc_host_clk_gate() -> mmc_host_clk_release() > > Which would make the usecases more clear (This is CC'd to stable@ because the next two patches, which fix observable races, depend on it.) Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mmc: sdhci: fix retuning timer wrongly deleted in sdhci_tasklet_finishAaron Lu2011-08-291-3/+0
| | | | | | | | | | | | | | commit 78869618a886d33d8cdfcb78cf9b245b5250e465 upstream. Currently, the retuning timer for retuning mode 1 will be deleted in function sdhci_tasklet_finish after a mmc request done, which will make retuning timing never trigger again. This patch fixed this problem. Signed-off-by: Aaron Lu <Aaron.Lu@amd.com> Reviewed-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get clearedShawn Guo2011-08-041-1/+1
| | | | | | | | | | | | | | commit 803862a6f7de4939e0a557214e5e4b37e36f87ff upstream. The function esdhc_readl_le intends to clear bit SDHCI_CARD_PRESENT, when the card detect gpio tells there is no card. But it does not clear the bit actually. The patch gives a fix on that. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-07-131-27/+50
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: core: Bus width testing needs to handle suspend/resume
| * mmc: core: Bus width testing needs to handle suspend/resumePhilip Rakity2011-07-131-27/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* | ARM: 6980/1: mmci: use StartBitErr to detect bad connectionsLinus Walleij2011-07-062-1/+6
|/ | | | | | | | | | | | | | | Stresstesting insert/remove of SD-cards can trigger a StartBitErr. This made the driver to hang in forever waiting for a non ocurring data timeout. This bit and interrupt is documented in the original PL180 TRM, just never implemented until now. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* mmc: queue: bring discard_granularity/alignment into line with SCSIAdrian Hunter2011-06-251-6/+1
| | | | | | | | | | | | | SCSI defines discard alignment as the offset to the first optimal discard. In the case of SD/MMC, that is always zero which is the default. SCSI defines discard granularity as a hint of a optimal discard size. That is much better expressed by the MMC "preferred erase size" (pref_erase) field. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: queue: append partition subname to queue thread nameAdrian Hunter2011-06-253-5/+8
| | | | | | | | | | | | | | | | | | | For example, an eMMC with 2 boot partitions will have 3 threads. The names change from: 40 ? 00:00:00 mmcqd/0 41 ? 00:00:00 mmcqd/0 42 ? 00:00:00 mmcqd/0 to: 40 ? 00:00:00 mmcqd/0 41 ? 00:00:00 mmcqd/0boot0 42 ? 00:00:00 mmcqd/0boot1 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: core: make erase timeout calculation allow for gated clockAdrian Hunter2011-06-251-1/+1
| | | | | | | | | The erase timeout calculation may depend on clock rate which is zero if the clock is gated, so use mmc_host_clk_rate() which allows for that case. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: block: switch card to User Data Area when removing the block driverAdrian Hunter2011-06-251-0/+3
| | | | | | | | | | | The MMC block driver and other drivers (e.g. mmc-test) will expect the card to be switched to the User Data Area eMMC partition when they start. Hence the MMC block driver should ensure it is that way when it is removed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdio: reset card during power_restoreDaniel Drake2011-06-251-0/+39
| | | | | | | | | mmc_sdio_power_restore() skips some steps that are performed in other power-related codepaths which are necessary to fully reset the card. Without this, runtime PM fails for SD8686 SDIO wifi on OLPC XO-1.5. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhi: DMA slave ID 0 is invalidGuennadi Liakhovetski2011-06-251-1/+1
| | | | | | | | Don't try to allocate DMA resources if the platform didn't specify positive DMA slave IDs. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
generated by cgit v1.1 at 2024-05-05 07:52:34 +0000