aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/dm9000.c
Commit message (Collapse)AuthorAgeFilesLines
* dm9000: Support MAC address setting through platform data.Laurent Pinchart2008-08-071-0/+5
| | | | | | | | | | | | The dm9000 driver reads the chip's MAC address from the attached EEPROM. When no EEPROM is present, or when the MAC address is invalid, it falls back to reading the address from the chip. This patch lets platform code set the desired MAC address through platform data. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* DM9000: Remove magic numbersBen Dooks2008-07-221-6/+9
| | | | | | | | Remove magic numbers for items that we already have defined in the register header file. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* DM9000: Remove DEFAULT_TRIGGER for request_irq() flags.Ben Dooks2008-06-241-7/+2
| | | | | | | | | | | Currently all but one user (AT91SAM9261EK) of the dm9000 driver passes their IRQ flags through the resources attached to the platform device. This means we can remove the use of DEFAULT_TRIGGER as the blackfin machines all seem to have their triggers set properly. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* DM9000: Add missing msleep() in EEPROM wait code.Ben Dooks2008-06-241-0/+2
| | | | | | | | The msleep() call in the code that checks for the EEPROM controller's busy status was missing. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* DM9000: Allow the use of the NSR register to get link status.Ben Dooks2008-06-241-2/+39
| | | | | | | | | | | | | The DM9000's internal PHY reports a copy of the link status in the NSR register of the chip. Reading the status when polling for link status is faster as it eliminates the need to sleep, but does not print as much information. Add an platform flag to force this behaviour, and a Kconfig option to allow it to be forced to the faster method always. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* DM9000: Use NSR to determine link-status on internal PHYBen Dooks2008-06-241-1/+8
| | | | | | | | | | The DM9000_NSR register contains a copy of the internal PHY's link status which we can use to determine if the link is up or down. This eliminates the more costly (and sleeping) PHY read when using the DM9000's own PHY. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* DM9000: Cleanup source code - remove forward declerationsBen Dooks2008-06-241-518/+498
| | | | | | | | Cleanup the source code by moving the code around to avoid having to declare the functions before they are used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* DM9000: Cleanup source codeBen Dooks2008-06-241-32/+30
| | | | | | | | | Cleanup bits of the DM9000 driver to make the code neater and easier to read. This is includes removing some old definitions, re-indenting areas, etc. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* DM9000: Cleanups after the resource changesBen Dooks2008-06-241-20/+4
| | | | | | | | | | | Remove the now extraneous checks in dm9000_release_board() now that the two-resource case is removed. Also remove the check on pdev->num_resources, as we check the return data from platform_get_resource() to ensure we have not only the right number but the right type of resources as well. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* DM9000: Add support for DM9000A and DM9000B chipsBen Dooks2008-06-241-5/+61
| | | | | | | | | | Add support for both the DM9000A and DM9000B versions of the DM9000 networking chip. This includes adding support for the Link-Change IRQ which is used instead of polling the PHY every 2 seconds. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* DM9000: Remove the 2 resources probe scheme.Laurent Pinchart2008-06-241-62/+44
| | | | | | | | | | | The dm9000 driver accepts either 2 or 3 resources to describe the platform devices. The 2 resources case abuses the ioresource mechanism by passing ioremap()ed memory through the platform device resources. This patch removes that case and converts boards that were using it to the 3 resources scheme. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* Merge branch 'master' of ↵David S. Miller2008-05-251-1/+1
|\ | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/cpmac.c net/mac80211/mlme.c
| * [netdrvr] dm9000: use delayed work to update mii phy state fixAndrew Morton2008-05-221-1/+1
| | | | | | | | | | | | | | | | | | | | use cancel_delayed_work_sync() Cc: Ben Dooks <ben-linux@fluff.org> Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | Merge branch 'master' of ↵David S. Miller2008-05-151-4/+33
|\ \ | |/ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-4965-rs.c drivers/net/wireless/rt2x00/rt61pci.c
| * DM9000: Use delayed work to update MII PHY stateBen Dooks2008-05-131-0/+26
| | | | | | | | | | | | | | | | | | Periodically check the MII PHY status to ensure that the network layer's link status is updated and the user informed of any changes. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * DM9000: Update and fix driver debugging messagesEnrico Scholz2008-05-131-1/+4
| | | | | | | | | | | | | | | | | | | | There was a missing newline in a dev_dbg() message. Values read from/written into PHY registers might be for interest too, so I added new dbg messages there. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * DM9000: Add __devinit and __devexit attributes to probe and removeEnrico Scholz2008-05-131-3/+3
| | | | | | | | | | | | | | | | | | There were missing __dev* annotations for the dm9000_probe() and dm9000_drv_remove() functions. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | [netdrvr] Trim trailing whitespace for several driversJeff Garzik2008-05-131-3/+3
|/ | | | Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* net drivers: fix platform driver hotplug/coldplugKay Sievers2008-04-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable network platform drivers, to re-enable auto loading. NOTE: didn't change drivers/net/fs_enet/fs_enet-main.c "old binding" support. That looks problematic in the first place (it even uses the ancient "struct device_driver" binding scheme for platform_bus!) and I suspect it will vanish soonish when arch/powerpc rules the world. Also, drivers/net/ne.c would have needed more thought to sort out. [akpm@linux-foundation.org: fix sgiseeq.c] [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Scott Wood <scottwood@freescale.com> Cc: Vitaly Bordug <vitb@kernel.crashing.org> Cc: Dale Farnsworth <dale@farnsworth.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* dm9000 trivial annotationAl Viro2008-03-301-1/+1
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dm9000: Support promisc and all-multi modesPeter Korsgaard2008-03-251-2/+8
| | | | | Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Show the MAC address source after printing MACBen Dooks2008-02-111-3/+7
| | | | | | | | Show whether the MAC address was read from the EEPROM or the onboard PAR registers. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Update retry count whilst identifying chipBen Dooks2008-02-111-1/+1
| | | | | | | | | | | | | Reading the ID register does not always return the correct ID from the device, so we retry several times to see if we get a correct value. These failures seem to be excaserbated by the speed of the access to the chip (possibly time between issuing the address and then the data cycle). Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Add support for MII ioctl() callsBen Dooks2008-02-111-0/+12
| | | | | | | | Add entry to handle the MII ioctl() calls via the generic_mii_ioctl call. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Add platform flag for no attached EEPROMBen Dooks2008-02-111-0/+15
| | | | | | | | | | Allow the platform data to specify to the DM9000 driver that there is no posibility of an attached EEPROM on the device, so default all reads to 0xff and ignore any write operations. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Remove redudant use of "& 0xff"Ben Dooks2008-02-111-6/+6
| | | | | | | | | The writing of the data should implicitly truncate the data to 8bits, so do not bother with the ands in the code. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Remove cal_CRC() and use ether_crc_le insteadBen Dooks2008-02-111-26/+9
| | | | | | | | | Remove the cal_CRC as this is basically wrappering the ether_crc_le function, and is only being used by the multicast hash table functions. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Fix delays used by EEPROM read and writeBen Dooks2008-02-111-3/+51
| | | | | | | | | The code was using a delay of 8ms, when it should have been using the EEPROM status flag from the device to indicate the EEPROM transaction had finished. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Use netif_msg to enable debugging optionsBen Dooks2008-02-111-6/+22
| | | | | | | | | | Use the netif_msg_*() macros to enable the debugging based on the board's msg_enable field. The output still goes via the dev_dbg() macros, so will be tagged and output as appropriate. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Remove unnecessary changelog in header commentBen Dooks2008-02-111-40/+5
| | | | | | | | We have a perfectly good version control system, so we do not need to duplicate change comments in the header for this code. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Ensure spinlock held whilst accessing EEPROM registersBen Dooks2008-02-111-0/+20
| | | | | | | | | | Ensure we hold the spinlock whilst the registers and being modified even though we hold the overall lock. This should protect against an interrupt happening whilst we are using the device. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Remove EEPROM initialisation code.Ben Dooks2008-02-111-29/+0
| | | | | | | | | Remove the old hack to program an initial EEPROM setting into the DM9000 as we now have ethtool support for reading and writing the EEPROM. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Add ethtool control of msg_enable valueBen Dooks2008-02-111-0/+16
| | | | | | | | Allow the msg_enable value to be read and written by the ethtool interface. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Add ethtool support for reading and writing EEPROMBen Dooks2008-02-111-6/+60
| | | | | | | | Add ethtool support to access the configuration EEPROM connected to the DM9000. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Add mutex to protect accessBen Dooks2008-02-111-14/+39
| | | | | | | | | | Add a mutex to serialise access to the chip functions from entries such as the ethtool and the MII code. This should reduce the amount of time the spinlock is held to protect the address register. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Remove barely used SROM array read.Ben Dooks2008-02-111-13/+11
| | | | | | | | | | | | | | | The srom array in the board data is only being used in the device probe routines. The probe also only uses the first 6 bytes of an array we spend 512ms reading 128 bytes from. Change to reading the MAC area directly to the MAC address structure. As a side product, we rename the read_srom_word to dm9000_read_eeprom to bring it into line with the rest of the driver. No change is made to the delay in this function, which will be dealt with in a later patch. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Use msleep() instead of udelay()Ben Dooks2008-02-111-2/+21
| | | | | | | | | | | | We can use sleeping functions when reading and writing the PHY registers, so let us sleep instead of busy waiting for the PHY. Note, this also fixes a bug reading the PHY where only 100uS was being used instead of 150uS Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Do not sleep with spinlock and IRQs heldBen Dooks2008-02-111-1/+16
| | | | | | | | | | | | | | The phy read and write routines call udelay() with the board lock held, and with the posibility of IRQs being disabled. Since these delays can be up to 500usec, and are only required as we have to save the chip's address register. To improve the behaviour, hold the lock whilst we are writing and then restore the state before the delay and then repeat the process once the delay has happened. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Add initial ethtool supportBen Dooks2008-02-111-1/+68
| | | | | | | Add support for ethtool operations for the DM9000. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Remove old timer based poll routinesBen Dooks2008-02-111-34/+0
| | | | | | | | | | | | | | | | | | | Remove the timer based MII phy polling, as this is currently broken with the new EEPROM code that now uses mutexes to protect the phy access. This will need to be replaced in the future by some form of mutex safe mechanism for reading the MII phy status. The replacement has not been done here as changing this patch, which is early in the sequence has quite a knock-on effect. Once this series is merged, then a new presentation of an patch to poll the MII link status can be added. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Pass IRQ flags via platform resourcesBen Dooks2008-02-111-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | Use the flags in the IRQ resource to specify the type of IRQ being requested, so that systems which do not have level-based interrupts, or change the interrupt in some other way can specify this without making an #ifdef mess in the driver. This is specifically designed to undo the change in commit 4e4fc05a2b6e7bd2e0facd96e0c18dceb34d9349 which hardwires the type for everyone but blackfin to IRQT_RISING, which breaks all a number of Simtec boards which use (and setup in the bootloader) active low IRQs. Note, although there where originally objections due to the use of IORESOURCE_IRQ and IRQT_ flags not sharing the same definition, at least <include/linux/interrupt.h> notes these are the same. Signed-off-by: Ben Dooks <ben-linux@fluff.org> CC: Daniel Mack <daniel@caiaq.de> CC: Bryan Wu <bryan.wu@analog.com> CC: Alex Landau <landau.alex@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000 update debugging macros to use debug levelBen Dooks2008-02-111-35/+19
| | | | | | | | | Change the debug macros to use the compiler to elide any unnecessary debug level, and to allow device configurable debug control. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000 use dev_xxx() instead of printk for output.Ben Dooks2008-02-111-28/+28
| | | | | | | | Move to using dev_dbg() and friends for the output of information to the user. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Add platform data to specify external phyBen Dooks2008-02-111-0/+6
| | | | | | | | | | | Patch from: Laurent Pinchart <laurentp@cse-semaphore.com> This patch adds a flag to the DM9000 platform data which, when set, configures the device to use an external PHY. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Ben Dooks <ben-linuy@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* DM9000: Fix endian-ness of data accesses.Ben Dooks2008-02-111-6/+7
| | | | | | | | | | | Patch from: Laurent Pinchart <laurentp@cse-semaphore.com> This patch splits the receive status in 8bit wide fields and convert the packet length from little endian to CPU byte order. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [ARM] 4762/1: Basic support for Toradex Colibri moduleDaniel Mack2008-01-281-1/+2
| | | | | | | | | This patch adds support for Toradex' PXA27x based Colibri module. It's kept as simple as possible to only provide basic functionality. A default config is also included. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* DM9000 initialization fixMike Rapoport2007-10-191-3/+3
| | | | | | | | | | | DM9000 driver returns success even if it is failed to detect the chip. Below patch fixes it. Signed-off-by: Mike Rapoport <mike@compulab.co.il> drivers/net/dm9000.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches2007-10-101-5/+4
| | | | | | | This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET] drivers/net: statistics cleanup #1 -- save memory and shrink codeJeff Garzik2007-10-101-22/+7
| | | | | | | | | | | | | | | | | We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle2007-10-101-1/+0
| | | | | | | | | | | | It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.1 at 2024-08-08 11:59:10 +0000