aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/sis900.c
Commit message (Collapse)AuthorAgeFilesLines
* sis900: generate fake MAC address if the hardware doesn't have oneDaniele Venzano2009-01-141-4/+4
| | | | | | | | | | | | | | | | | | The attached patch modifies the sis900 driver when the MAC address read from the hardware is invalid. As suggested, the patch now generates a random address so that the user can go on and use the hardware. In any case a message is also shown to warn on the unexpected condition. This seems to happen with newer HW implementation of the sis900 chipset, since this never came up before. Patch is against vanilla 2.6.28 (but the driver doesn't change so often, so it will probably apply to older/newer versions too). See bugzilla ID 10201 and 11649 and ignore the previous patch. Signed-off-by: Daniele Venzano <venza@brownhat.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: add missing set_mac_address hookStephen Hemminger2009-01-111-0/+1
| | | | | | | | Many drivers lost the ability to set ethernet address accidently during the net_device_ops conversion. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2008-11-261-1/+0
|\ | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/hp-plus.c drivers/net/wireless/ath5k/base.c drivers/net/wireless/ath9k/recv.c net/wireless/reg.c
| * driver/net/*: remove redundant argument commentsQinghuang Feng2008-11-231-1/+0
| | | | | | | | | | | | | | remove redundant argument comments in files of drivers/net/* Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sis900: fix warning in drivers/net/sis900.cIngo Molnar2008-11-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this warning: drivers/net/sis900.c: In function ‘sis900_timer’: drivers/net/sis900.c:1280: warning: ‘speed’ may be used uninitialized in this function triggers because GCC does not recognize the (correct) error flow between sis900_read_mode(), 'speed' and 'duplex'. Annotate it. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sis900: convert to net_device_opsStephen Hemminger2008-11-211-11/+16
| | | | | | | | | | | | | | Convert driver to new net_device_ops. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netdevice: safe convert to netdev_priv() #part-3Wang Chen2008-11-121-32/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers/net: Kill now superfluous ->last_rx stores.David S. Miller2008-11-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: convert print_mac to %pMJohannes Berg2008-10-271-3/+2
|/ | | | | | | | | | | | This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [netdrvr] Trim trailing whitespace for several driversJeff Garzik2008-05-131-1/+1
| | | | Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* drivers/net: Add missing "space"Joe Perches2008-01-281-3/+3
| | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches2007-10-101-5/+4
| | | | | | | This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET] drivers/net: statistics cleanup #1 -- save memory and shrink codeJeff Garzik2007-10-101-37/+19
| | | | | | | | | | | | | | | | | We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle2007-10-101-1/+0
| | | | | | | | | | | | It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* sis900_mii_probe() must be __devinitAdrian Bunk2007-07-101-1/+1
| | | | | | | | | | | | | | | | This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x298170): Section mismatch: reference to .init.text:sis900_mii_probe (between 'sis900_probe' and 'sis900_default_phy') ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sis900: Allocate rx replacement buffer before rx operationNeil Horman2007-04-271-4/+5
| | | | | | | | | | | | | | | | | | | | Just found a hole in my last patch. It was reported to me that shortly after we integrated this patch. The report was of an oops that took place inside of netif_rx when using the sis900 driver. Looking at my origional patch I noted that there was a spot between the new skb_alloc and the refill_rx_ring label where skb got reassigned to the pointer currently held in the rx_ring for the purposes of receiveing the frame. The result of this is however that the buffer that gets passed to netif_rx (if it is called), then gets placed right back into the rx_ring. So if you receive frames fast enough the skb being processed by the network stack can get corrupted. The reporter is testing out the fix I've written for this below (I'm not near my hardware at the moment to test myself), but I wanted to post it for review ASAP. I'll post test results when I hear them, but I think this is a pretty straightforward fix. It just uses a separate pointer to do the rx operation, so that we don't improperly reassign the pointer that we use to refill the rx ring. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo2007-04-251-3/+0
| | | | | | | One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sis900: Allocate rx replacement buffer before rx operationNeil Horman2007-04-241-24/+20
| | | | | | | | | | | | | | | The sis900 driver appears to have a bug in which the receive routine passes the skbuff holding the received frame to the network stack before refilling the buffer in the rx ring. If a new skbuff cannot be allocated, the driver simply leaves a hole in the rx ring, which causes the driver to stop receiving frames and become non-recoverable without an rmmod/insmod according to reporters. This patch reverses that order, attempting to allocate a replacement buffer first, and receiving the new frame only if one can be allocated. If no skbuff can be allocated, the current skbuf in the rx ring is recycled, dropping the current frame, but keeping the NIC operational. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sis900 warning fixesAndrew Morton2007-03-061-5/+5
| | | | | | | | | | | | drivers/net/sis900.c: In function 'sis900_reset_phy': drivers/net/sis900.c:972: warning: 'status' may be used uninitialized in this function drivers/net/sis900.c: In function 'sis900_check_mode': drivers/net/sis900.c:1431: warning: 'status' may be used uninitialized in this function drivers/net/sis900.c: In function 'sis900_timer': drivers/net/sis900.c:1467: warning: 'status' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* drivers/net: const-ify ethtool_ops declarationsJeff Garzik2006-09-131-2/+2
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* drivers/net: Trim trailing whitespaceJeff Garzik2006-09-131-110/+110
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* drivers/net: Remove deprecated use of pci_module_init()Jeff Garzik2006-08-191-1/+1
| | | | | | | From: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] Add new PHY to sis900 supported listDaniele Venzano2006-08-141-0/+1
| | | | | | | | | | Please include the attached patch that adds support for a new PHY to the sis900 driver. See also Bugzilla 6919. Signed-off-by: Daniele Venzano <venza@brownhat.org> -- Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] irq-flags: drivers/net: Use the new IRQF_ constantsThomas Gleixner2006-07-021-1/+1
| | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'master' into upstreamJeff Garzik2006-05-201-0/+1
|\
| * sis900: phy for FoxCon motherboardJames Cameron2006-05-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 661FX7MI-S motherboard which uses the SiS 661FX chipset. The patch adds an entry to mii_chip_info for the transceiver. The PHY ids were found using the sis900_c_122.diff patch from http://brownhat.org/sis900.html but that patch didn't solve the problem, because the PHY at address 1 was already being chosen. Without my patch, when bursts of packets arrive from other hosts on a LAN, the interface dropped one roughly 10% of the time, causing retransmits. There were fifth second pauses in refresh of large xterms, and it made Netrek suck. I can provide further test data. Workaround in lieu of patch is to use mii-tool to advertise 100baseTx-HD, then force renegotiation. I wasn't able to identify the actual transceiver, so the description field is a guess. This patch is similar to Artur Skawina's patch: http://marc.theaimsgroup.com/?l=linux-netdev&m=114297516729079&w=2 I'm not sure, but I wonder if it means the default behaviour should be changed, so as to better handle future transceivers. Diff is against 2.6.16.13. Signed-off-by: James Cameron <james.cameron@hp.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* | [PATCH] Add VLAN (802.1q) support to sis900 driverDaniele Venzano2006-04-201-6/+20
|/ | | | | | | | | | | | | The attached patch adds support for VLANs to the sis900 driver and bumps the version number. It is based on an old (2003) patch for the 2.4 series by Hamid Hashemi Golpayegani. It applies on top of 2.6.16(.5). I have one report that it works and behaves as intended. Please review and consider for inclusion. Signed-off-by: Daniele Venzano <venza@brownhat.org> -- Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] Typo fixesAlexey Dobriyan2006-03-281-1/+1
| | | | | | | | Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] more s/fucn/func/ typo fixesAkinobu Mita2006-03-261-2/+2
| | | | | | | | s/fucntion/function/ typo fixes Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sis900 adm7001 PHY supportArtur Skawina2006-03-221-0/+1
| | | | | | | | | this patch is required to get a SIS964 based motherboard ethernet working (FSC D1875) (picking the #1 transceiver, instead of the last one, in case no known ones were found might be a better default, and would have worked in this case too) Signed-off-by: Artur Skawina <art_k@o2.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Massive net driver const-ification.Arjan van de Ven2006-03-031-4/+4
|
* Fix Wake on LAN support in sis900Daniele Venzano2006-02-251-2/+2
| | | | | | | | | | Fix two bugs in the WoL implementation of sis900. The first causes hangs on some system on driver load, the second causes troubles when disabling WoL support. Both fixes are one liner and really simple. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Daniele Venzano <venza@brownhat.org>
* [PATCH] Add Wake on LAN support to sis900 (2)Daniele Venzano2005-10-281-2/+71
| | | | | | | | | | | | | | | | | | Sorry, but that day I had smoked somthing too heavy for me, the patch didn't apply. Here's a new one. The patch availble below adds support for Wake on LAN to the sis900 driver. Some register addresses were added to sis900.h and two new functions were implemented in sis900.c. WoL status is controlled by ethtool. Patch is against 2.6.13. Comments are welcome, but also consider for inclusion in the -mm series. Signed-off-by: Daniele Venzano <venza@brownhat.org> -- Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* sis900: come alive after temporary memory shortageVasily Averin2005-10-281-4/+12
| | | | | | | | | | | | | | | | | | 1) Forgotten counter incrementation in sis900_rx() in case it doesn't get memory for skb, that leads to whole interface failure. Problem is accompanied with messages: eth0: Memory squeeze,deferring packet. eth0: NULL pointer encountered in Rx ring, skipping 2) If counter cur_rx overflows and there'll be temporary memory problems buffer can't be recreated later, when memory IS available. 3) Limit the work in handler to prevent the endless packets processing if new packets are generated faster then handled. Signed-off-by: Konstantin Khorenko <khorenko@sw.ru> Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [NET]: Remove gratuitous use of skb->tail in network drivers.David S. Miller2005-06-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many drivers use skb->tail unnecessarily. In these situations, the code roughly looks like: dev = dev_alloc_skb(...); [optional] skb_reserve(skb, ...); ... skb->tail ... But even if the skb_reserve() happens, skb->data equals skb->tail. So it doesn't make any sense to use anything other than skb->data in these cases. Another case was the s2io.c driver directly mucking with the skb->data and skb->tail pointers. It really just wanted to do an skb_reserve(), so that's what the code was changed to do instead. Another reason I'm making this change as it allows some SKB cleanups I have planned simpler to merge. In those cleanups, skb->head, skb->tail, and skb->end pointers are removed, and replaced with skb->head_room and skb->tail_room integers. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] net/sis900: Use the DMA_32BIT_MASK constantTobias Klauser2005-06-261-3/+2
| | | | | | | | | | | Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() instead of custom macros. This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
* [PATCH] More ethtool support for sis900 and warning fixDaniele Venzano2005-05-121-3/+49
| | | | | | | | | | | | Add support to sis900 for the following ethtool ops: - get_link - get_settings - set_settings - nway_reset Signed-off-by: Daniele Venzano <webvenza@libero.it> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* Linux-2.6.12-rc2Linus Torvalds2005-04-161-0/+2370
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.1 at 2024-10-30 10:09:51 +0000