aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath5k/attach.c
Commit message (Collapse)AuthorAgeFilesLines
* more driver stuff from 3.2.72Wolfgang Wiedmeyer2015-10-231-38/+33
|
* ath5k: disable 5 GHz support for the dualband PHY chip on dual-radio AR5312Felix Fietkau2011-04-141-0/+5
| | | | | | | | | | | | | | There are two variants of AR5312 dual-band devices, one single-radio and the other one dual-radio. On the dual-radio board, the first MAC only supports 5 GHz, even though it has a dual-band PHY. The 2.4 GHz part of this phy is used in pass-through mode, connecting the second MAC with the second PHY. Disable 2.4 GHz for the first MAC on an AR5312, but only if the board configuration indicates a dual-radio device. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: fix the EEPROM check for hw AES crypto supportFelix Fietkau2011-04-141-1/+1
| | | | | | | | | | EEPROM version 5.0 adds a new field for disabling AES support, having an older version means that AES is present. This patch fixes hw AES crypto support on AR5312 boards, which have an older EEPROM version. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Enable AR2315 chipset recognitionWojciech Dubowik2011-02-211-1/+2
| | | | | | | | Enable recognition of AR2315 chipsets in ath5k driver. Reported-by: Simon Morgenthaler <s.morgenthaler@students.unibe.ch> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Fix short and long retry configurationBruno Randolf2011-01-281-2/+2
| | | | | | | | | | | | | | | | | The register definition for retry configuration on AR5212 was wrong, and simply copied over from AR5210. Update the register definitions from the documentation. Let the short and long retries be configured from mac80211 and use the standard values of 7 and 4 by default. Also we need to make sure we don't export more retries than we are configured for to mac80211 (and the rate module) in hw->max_rate_tries. Also clean up the code by removing unused defines and variables and drop the different values for "station retries" - if these need to be different it can be handled tru ah_retry_long/short. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Use pci_is_pcie()Hauke Mehrtens2010-12-221-1/+1
| | | | | | | | Use function pci_is_pcie() instead of accessing struct member directly. CC: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Add a function to read chipset's MAC revisionFelix Fietkau2010-12-021-4/+7
| | | | | | | | | Add bus dependent revision read function which is used to determine chipset's MAC before hardware is initialized. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Check if pci pdev struct is initialized in common functions.Felix Fietkau2010-12-021-3/+2
| | | | | | | | | To be able to support other busses than PCI check if pci device structure is initialized. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Introduce ath5k_init_softc function as in ath9kFelix Fietkau2010-12-021-5/+5
| | | | | | | | | | | | Split pci initialization into hardware specific functions and softc structure initialization. Make function naming similar to ones ath9k. Introduce ath_bus_opts in ath5k for later AHB bus integration. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Add new field on ath5k_hw to track bandwidth modesNick Kossifidis2010-11-301-1/+1
| | | | | | | | | | | * Prepare for half/quarter/turbo support, introduce a new ah_bwmode parameter and get rid of ah_turbo. Bwmode stands for "bandwidth mode" and can have 4 values, default (20MHz), turbo (40MHz), half rate (10MHz), and quarter rate (5MHz). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Fix double free on hw attach error pathJones Desougi2010-10-271-9/+8
| | | | | | | | | | If ath5k_hw_attach fails it will free sc->ah (local variable ah) before returning. However, when it reports failure the caller (ath5k_pci_probe) will also free sc->ah. Let the caller handle the deallocation, it does so on further errors as well. Signed-off-by: Jones Desougi <jones.desougi@27m.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Remove unused variable for atim windowBruno Randolf2010-09-281-1/+0
| | | | | | | It's not used and it's unlikely we will ever implement ATIM. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Simplify cw_min/max and AIFS configurationBruno Randolf2010-09-211-2/+0
| | | | | | | | | | | | | | | | | | Get rid of overly complicated cw_min/max and AIFS configuration: * Validate values in ath5k_hw_set_tx_queueprops(), so we can use them directly without further checks or computation in ath5k_hw_reset_tx_queue(). * Simplifiy by using AR5K_TUNE_AIFS|CWMIN|CWMAX variables directly since we don't support XR or B channels. That way we can also remove AR5K_TXQ_USEDEFAULT and the confusing logic around it. * Update data types: AIFS is u8, CW's are u16. * Remove now unneeded variables in ath5k_hw. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath/ath5k/ath9k: Fix crypto capabilities merge issueBruno Randolf2010-09-211-2/+1
| | | | | | | | | | | | Fixing up a merge issue / concurrent development: Remove unneeded ath_crypt_caps flags, as per "ath9k_hw: remove useless hw capability flags" (364734fafbba0c3133e482db78149b9a823ae7a5), but set the AESCCM flag for ath9k. common ath code still needs a flag for this because there is ath5k hardware which can't do AES in hardware. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Use common crypt capabilities flagsBruno Randolf2010-09-161-4/+6
| | | | | | | | Replace ah_aes_support and ah_combined_mic with common ath_crypt_caps ATH_CRYPT_CAP_CIPHER_AESCCM and ATH_CRYPT_CAP_MIC_COMBINED. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Use common ath key management functionsBruno Randolf2010-09-161-0/+3
| | | | | | | | | | | | | | | | | | Use common ath key management functions in ath5k. This fixes problems with HW encryption in AP mode, which was broken in the ath5k implementation. Before (with the ath5k implementation) only one client could connect to the AP using HW encryption and WPA. When a second client connected, the first client was not able to send/receive any more packets. Because of the problems with HW encryption, software encryption was always used in AP mode, which resulted in a high CPU load (and/or low thruput) on embedded devices. Instead of trying to fix the implementation in ath5k it makes more sense to share the code with ath9k. This also enables HW encryption for AP mode again. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: clean up some commentsBob Copeland2010-08-241-3/+3
| | | | | | | | This fixes a few misspellings, word repetitions, and some grammar nits in ath5k comments. No code changes. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: rename ath5k_hw_set_associd to _set_bssidNick Kossifidis2010-08-241-1/+1
| | | | | | | | | Although the named function also sets the aid, its main purpose is configuring the bssid and we use that everywhere else. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵David S. Miller2010-06-231-0/+1
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/ipv4/ip_output.c
| * ath5k: initialize ah->ah_current_channelBob Copeland2010-06-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ath5k assumes ah_current_channel is always a valid pointer in several places, but a newly created interface may not have a channel. To avoid null pointer dereferences, set it up to point to the first available channel until later reconfigured. This fixes the following oops: $ rmmod ath5k $ insmod ath5k $ iw phy0 set distance 11000 BUG: unable to handle kernel NULL pointer dereference at 00000006 IP: [<d0a1ff24>] ath5k_hw_set_coverage_class+0x74/0x1b0 [ath5k] *pde = 00000000 Oops: 0000 [#1] last sysfs file: /sys/devices/pci0000:00/0000:00:0e.0/ieee80211/phy0/index Modules linked in: usbhid option usb_storage usbserial usblp evdev lm90 scx200_acb i2c_algo_bit i2c_dev i2c_core via_rhine ohci_hcd ne2k_pci 8390 leds_alix2 xt_IMQ imq nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_cc Pid: 1597, comm: iw Not tainted (2.6.32.14 #8) EIP: 0060:[<d0a1ff24>] EFLAGS: 00010296 CPU: 0 EIP is at ath5k_hw_set_coverage_class+0x74/0x1b0 [ath5k] EAX: 000000c2 EBX: 00000000 ECX: ffffffff EDX: c12d2080 ESI: 00000019 EDI: cf8c0000 EBP: d0a30edc ESP: cfa09bf4 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process iw (pid: 1597, ti=cfa09000 task=cf88a000 task.ti=cfa09000) Stack: d0a34f35 d0a353f8 d0a30edc 000000fe cf8c0000 00000000 1900063d cfa8c9e0 <0> cfa8c9e8 cfa8c0c0 cfa8c000 d0a27f0c 199d84b4 cfa8c200 00000010 d09bfdc7 <0> 00000000 00000000 ffffffff d08e0d28 cf9263c0 00000001 cfa09cc4 00000000 Call Trace: [<d0a27f0c>] ? ath5k_hw_attach+0xc8c/0x3c10 [ath5k] [<d09bfdc7>] ? __ieee80211_request_smps+0x1347/0x1580 [mac80211] [<d08e0d28>] ? nl80211_send_scan_start+0x7b8/0x4520 [cfg80211] [<c10f5db9>] ? nla_parse+0x59/0xc0 [<c11ca8d9>] ? genl_rcv_msg+0x169/0x1a0 [<c11ca770>] ? genl_rcv_msg+0x0/0x1a0 [<c11c7e68>] ? netlink_rcv_skb+0x38/0x90 [<c11c9649>] ? genl_rcv+0x19/0x30 [<c11c7c03>] ? netlink_unicast+0x1b3/0x220 [<c11c893e>] ? netlink_sendmsg+0x26e/0x290 [<c11a409e>] ? sock_sendmsg+0xbe/0xf0 [<c1032780>] ? autoremove_wake_function+0x0/0x50 [<c104d846>] ? __alloc_pages_nodemask+0x106/0x530 [<c1074933>] ? do_lookup+0x53/0x1b0 [<c10766f9>] ? __link_path_walk+0x9b9/0x9e0 [<c11acab0>] ? verify_iovec+0x50/0x90 [<c11a42b1>] ? sys_sendmsg+0x1e1/0x270 [<c1048e50>] ? find_get_page+0x10/0x50 [<c104a96f>] ? filemap_fault+0x5f/0x370 [<c1059159>] ? __do_fault+0x319/0x370 [<c11a55b4>] ? sys_socketcall+0x244/0x290 [<c101962c>] ? do_page_fault+0x1ec/0x270 [<c1019440>] ? do_page_fault+0x0/0x270 [<c1002ae5>] ? syscall_call+0x7/0xb Code: 00 b8 fe 00 00 00 b9 f8 53 a3 d0 89 5c 24 14 89 7c 24 10 89 44 24 0c 89 6c 24 08 89 4c 24 04 c7 04 24 35 4f a3 d0 e8 7c 30 60 f0 <0f> b7 43 06 ba 06 00 00 00 a8 10 75 0e 83 e0 20 83 f8 01 19 d2 EIP: [<d0a1ff24>] ath5k_hw_set_coverage_class+0x74/0x1b0 [ath5k] SS:ESP 0068:cfa09bf4 CR2: 0000000000000006 ---[ end trace 54f73d6b10ceb87b ]--- Cc: stable@kernel.org Reported-by: Steve Brown <sbrown@cortland.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath5k: remove ATH_TRACE macroBruno Randolf2010-06-021-2/+0
|/ | | | | | | | Now that we have ftrace, it is not needed any more. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2010-04-151-0/+2
|\ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ath/ath5k/phy.c drivers/net/wireless/wl12xx/wl1271_main.c
| * ath5k: Adaptive Noise Immunity (ANI) ImplementationBruno Randolf2010-04-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an Adaptive Noise Imunity (ANI) implementation for ath5k. I have looked at both ath9k and HAL sources (they are nearly the same), and even though i have implemented some things differently, the basic algorithm is practically the same, for now. I hope that this can serve as a clean start to improve the algorithm later. This also adds a possibility to manually control ANI settings, right now only thru a debugfs file: * set lowest sensitivity (=highest noise immunity): echo sens-low > /sys/kernel/debug/ath5k/phy0/ani * set highest sensitivity (=lowest noise immunity): echo sens-high > /sys/kernel/debug/ath5k/phy0/ani * automatically control immunity (default): echo ani-on > /sys/kernel/debug/ath5k/phy0/ani * to see the parameters in use and watch them change: cat /sys/kernel/debug/ath5k/phy0/ani Manually setting sensitivity will turn the automatic control off. You can also control each of the five immunity parameters (noise immunity, spur immunity, firstep, ofdm weak signal detection, cck weak signal detection) manually thru the debugfs file. This is tested on AR5414 and nearly doubles the thruput in a noisy 2GHz band. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath5k: initialize default noise floorBruno Randolf2010-03-311-0/+1
| | | | | | | | | | | | | | | | | | Initialize noise floor variable with a default of -95. This was used uninitialized in the signal strength (RSSI -> dBm) conversion until the first noise floor calibration was completed. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵David S. Miller2010-04-111-0/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
| * include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* | ath5k: remove ah_mac_revisionBruno Randolf2010-03-101-1/+0
| | | | | | | | | | | | | | | | it's not used, and we have ah_mac_srev. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath5k: remove double opmode definitionBruno Randolf2010-03-101-2/+1
| | | | | | | | | | | | | | | | | | | | | | opmode (operating mode) was defined in struct ath5k_hw and struct ath5k_softc. remove it from ath5k_hw and use only from ath5k_softc (sc->opmode). (btw: what's the meaning of opmode when we have multiple interfaces?) Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath5k: preserve antenna settingsBruno Randolf2010-03-101-0/+1
|/ | | | | | | | save antenna settings and preserve across resets. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: use noise calibration from madwifi halBob Copeland2009-10-271-0/+2
| | | | | | | | | | | | | | | | | This updates ath5k to calibrate the noise floor similar to the way it is done in the madwifi hal and ath9k. Of note: - we start NF measurement at the same time as AGC calibration, but do not actually read the value until the periodic (long) calibration - we keep a history of the last few values read and write the median back to the hardware for CCA - we do not complain if NF calibration isn't complete, instead we keep the last read value. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: simplify passed params to ath5k_hw_set_associd()Luis R. Rodriguez2009-10-071-1/+1
| | | | | | | | | | | We have access to common->curbssid and common->curaid so just use those. Note that common->curaid is always 0 so this keeps our current behaviour of always using 0 for now. Once we fix storing the association ID passed by mac80211 this will require no changes here. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* atheros: define shared bssidmask settingLuis R. Rodriguez2009-10-071-1/+1
| | | | | | | Also make ath5k and ath9k use it, and share register definitions. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: allocate ath5k_hw prior to initializing hwLuis R. Rodriguez2009-10-071-19/+4
| | | | | | | | | | We can propagate better errors upon failed hw initialization, and set up the ath_common structure for attach purposes. This will become important once we start using the ath_common for read/write ops. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: initialize eeprom struct early on attachLuis R. Rodriguez2009-10-071-3/+2
| | | | | | | | | | | This fixes this sparse warning: CHECK drivers/net/wireless/ath/ath5k/attach.c drivers/net/wireless/ath/ath5k/attach.c:288:42: warning: symbol 'ee' shadows an earlier one drivers/net/wireless/ath/ath5k/attach.c:109:34: originally declared here Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: use common curbssid, bssidmask and macaddrLuis R. Rodriguez2009-10-071-2/+5
| | | | | | | | | The ah_sta_id was really being used as the macaddr. ath5k still does not use the association ID now passed up by mac80211, that can be fixed later. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath: move ath_bcast_mac to common headerLuis R. Rodriguez2009-10-071-1/+1
| | | | | | | This is used by both ath5k and ath9k to set the first bssid mask. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: don't use PCI ID to find the chip revisionPavel Roskin2009-08-281-5/+9
| | | | | | | | | | | | | | AR5K_SREV is available even if the chip has been put to sleep. Relying on the chip register allows binding non-standard PCI IDs by echo VENDOR_ID PRODUCT_ID >/sys/bus/pci/drivers/ath5k/new_id without having to specify the driver data as well. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: clarify srev comparison for CCMP checkBob Copeland2009-08-281-5/+2
| | | | | | | | | | As Pavel Roskin noted, the check for mac version as copied from legacy_hal made no sense. This replaces it with the equivalent and makes up a suitable #define for the mac version legacy_hal checked. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: add hardware CCMP encyption supportBob Copeland2009-08-281-0/+10
| | | | | | | | Recent ath5k hardware is capable of doing CCMP acceleration. Enable it for the cards that support it. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Preserve pcicfg bits during attachNick Kossifidis2009-08-141-1/+1
| | | | | | | | * During attach preserve pcicfg bits when enabling pci core sw retry fix. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Wakeup fixesNick Kossifidis2009-08-141-1/+1
| | | | | | | | | | | | | * Don't put chip to full sleep because there are problems during wakeup. Instead hold MAC/Baseband on warm reset state via a new function ath5k_hw_on_hold. * Minor cleanups Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Tested-by: Ben Greear <greearb@candelatech.com> Tested-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Check EEPROM before tweaking SERDESNick Kossifidis2009-08-141-22/+34
| | | | | | | | | | | * Read PCI-E infos offset from EEPROM and if it points to serdes section (0x40), enable serdes programming (further tweaking of serdes values during attach). This follows Legacy and Sam's HAL sources. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: enable hardware LEDsBob Copeland2009-07-101-0/+3
| | | | | | | | | | | Cardbus and some PCI cards use hardware LEDs rather than software GPIOs. Program them with the proper blink patterns when idle, scanning or associated. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13288. Tested-by: Frans Pop <elendil@planet.nl> Tested-by: Mark Hindley <mark@hindley.org.uk> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Implement antenna controlNick Kossifidis2009-05-061-1/+0
| | | | | | | | | | | | | | * Add code to support the various antenna scenarios supported by hw * For now hardcode the default scenario (single or dual omnis with tx/rx diversity working and tx antenna handled by session -hw keeps track on which antenna it got ack from each ap/station and maps each ap/station to one of the antennas-). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* atheros: put atheros wireless drivers into ath/Luis R. Rodriguez2009-04-221-0/+348
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.1 at 2024-05-14 06:52:45 +0000