aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/pcie
Commit message (Collapse)AuthorAgeFilesLines
* PCI: Allow pcie_aspm=force even when FADT indicates it is unsupportedColin Ian King2013-01-271-0/+3
| | | | | | | | | | | | | | | | | | commit 9e16721498b0c3d3ebfa0b503c63d35c0a4c0642 upstream. Right now using pcie_aspm=force will not enable ASPM if the FADT indicates ASPM is unsupported. However, the semantics of force should probably allow for this, especially as they did before 3c076351c4 ("PCI: Rework ASPM disable code") This patch just skips the clearing of any ASPM setup that the firmware has carried out on this bus if pcie_aspm=force is being used. Reference: http://bugs.launchpad.net/bugs/962038 Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASPM: Fix pcie devices with non-pcie childrenMatthew Garrett2012-04-021-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c9651e70ad0aa499814817cbf3cc1d0b806ed3a1 upstream. Since 3.2.12 and 3.3, some systems are failing to boot with a BUG_ON. Some other systems using the pata_jmicron driver fail to boot because no disks are detected. Passing pcie_aspm=force on the kernel command line works around it. The cause: commit 4949be16822e ("PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled") changed the behaviour of pcie_aspm_sanity_check() to always return 0 if aspm is disabled, in order to avoid cases where we changed ASPM state on pre-PCIe 1.1 devices. This skipped the secondary function of pcie_aspm_sanity_check which was to avoid us enabling ASPM on devices that had non-PCIe children, causing trouble later on. Move the aspm_disabled check so we continue to honour that scenario. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42979 and http://bugs.debian.org/665420 Reported-by: Romain Francoise <romain@orebokech.com> # kernel panic Reported-by: Chris Holland <bandidoirlandes@gmail.com> # disk detection trouble Signed-off-by: Matthew Garrett <mjg@redhat.com> Tested-by: Hatem Masmoudi <hatem.masmoudi@gmail.com> # Dell Latitude E5520 Tested-by: janek <jan0x6c@gmail.com> # pata_jmicron with JMB362/JMB363 [jn: with more symptoms in log message] Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: ignore pre-1.1 ASPM quirking when ASPM is disabledMatthew Garrett2012-03-191-0/+3
| | | | | | | | | | | | | | | commit 4949be16822e92a18ea0cc1616319926628092ee upstream. Right now we won't touch ASPM state if ASPM is disabled, except in the case where we find a device that appears to be too old to reliably support ASPM. Right now we'll clear it in that case, which is almost certainly the wrong thing to do. The easiest way around this is just to disable the blacklisting when ASPM is disabled. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: Rework ASPM disable codeMatthew Garrett2012-02-061-21/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3c076351c4027a56d5005a39a0b518a4ba393ce2 upstream. Right now we forcibly clear ASPM state on all devices if the BIOS indicates that the feature isn't supported. Based on the Microsoft presentation "PCI Express In Depth for Windows Vista and Beyond", I'm starting to think that this may be an error. The implication is that unless the platform grants full control via _OSC, Windows will not touch any PCIe features - including ASPM. In that case clearing ASPM state would be an error unless the platform has granted us that control. This patch reworks the ASPM disabling code such that the actual clearing of state is triggered by a successful handoff of PCIe control to the OS. The general ASPM code undergoes some changes in order to ensure that the ability to clear the bits isn't overridden by ASPM having already been disabled. Further, this theoretically now allows for situations where only a subset of PCIe roots hand over control, leaving the others in the BIOS state. It's difficult to know for sure that this is the right thing to do - there's zero public documentation on the interaction between all of these components. But enough vendors enable ASPM on platforms and then set this bit that it seems likely that they're expecting the OS to leave them alone. Measured to save around 5W on an idle Thinkpad X220. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: remove unused AER functionsChen Gong2011-05-211-9/+0
| | | | | | | | | In the commit 28eb5f2, aer_osc_setup is removed but corresponding definiton information in the aerdrv.h is missed. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/e1000e: Add and use pci_disable_link_state_locked()Yinghai Lu2011-05-211-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Need to use it in _e1000e_disable_aspm. This routine is used for error recovery, where the pci_bus_sem is already held, and we don't want pci_disable_link_state to try to take it again. So add a locked variant for use in cases like this. Found lock up: [ 2374.654557] kworker/32:1 D ffff881027f6b0f0 0 6075 2 0x00000000 [ 2374.654816] ffff88503f099a68 0000000000000046 ffff88503f098000 0000000000004000 [ 2374.654837] 00000000001d1ec0 ffff88503f099fd8 00000000001d1ec0 ffff88503f099fd8 [ 2374.654860] 0000000000004000 00000000001d1ec0 ffff88503dcc8000 ffff88503f090000 [ 2374.654880] Call Trace: [ 2374.654898] [<ffffffff810b1302>] ? __lock_acquired+0x3a/0x224 [ 2374.654914] [<ffffffff81c2b59c>] ? _raw_spin_unlock_irq+0x30/0x36 [ 2374.654925] [<ffffffff810b069d>] ? trace_hardirqs_on_caller+0x1f/0x178 [ 2374.654936] [<ffffffff81c2ab24>] rwsem_down_failed_common+0xd3/0x103 [ 2374.654945] [<ffffffff810b158f>] ? __lock_contended+0x3a/0x2a2 [ 2374.654955] [<ffffffff81c2ab7b>] rwsem_down_read_failed+0x12/0x14 [ 2374.654967] [<ffffffff813371e4>] call_rwsem_down_read_failed+0x14/0x30 [ 2374.654981] [<ffffffff8135df20>] ? pci_disable_link_state+0x5f/0xf5 [ 2374.654990] [<ffffffff81c2a0e6>] ? down_read+0x7e/0x91 [ 2374.654999] [<ffffffff8135df20>] ? pci_disable_link_state+0x5f/0xf5 [ 2374.655008] [<ffffffff8135df20>] pci_disable_link_state+0x5f/0xf5 [ 2374.655024] [<ffffffff81661796>] e1000e_disable_aspm+0x55/0x5a [ 2374.655037] [<ffffffff816677eb>] e1000_io_slot_reset+0x59/0xea [ 2374.655048] [<ffffffff8135fe0d>] ? report_mmio_enabled+0x5d/0x5d [ 2374.655057] [<ffffffff8135fe3b>] report_slot_reset+0x2e/0x5d [ 2374.655072] [<ffffffff8135369e>] pci_walk_bus+0x8a/0xb7 [ 2374.655081] [<ffffffff8135fe0d>] ? report_mmio_enabled+0x5d/0x5d [ 2374.655091] [<ffffffff813603be>] broadcast_error_message+0xa4/0xb2 [ 2374.655101] [<ffffffff81352c71>] ? pci_bus_read_config_dword+0x72/0x80 [ 2374.655110] [<ffffffff813606df>] do_recovery+0x9e/0xf9 [ 2374.655120] [<ffffffff81360786>] handle_error_source+0x4c/0x51 [ 2374.655129] [<ffffffff81360974>] aer_isr_one_error+0x1e9/0x21a [ 2374.655138] [<ffffffff81360a6c>] aer_isr+0xc7/0xcc [ 2374.655147] [<ffffffff813609a5>] ? aer_isr_one_error+0x21a/0x21a [ 2374.655159] [<ffffffff81096d9f>] process_one_work+0x237/0x3ec [ 2374.655168] [<ffffffff81096d10>] ? process_one_work+0x1a8/0x3ec [ 2374.655178] [<ffffffff8109728d>] worker_thread+0x17c/0x240 [ 2374.655186] [<ffffffff810b0803>] ? trace_hardirqs_on+0xd/0xf [ 2374.655196] [<ffffffff81097111>] ? manage_workers+0xab/0xab [ 2374.655209] [<ffffffff8109c8ed>] kthread+0xa0/0xa8 [ 2374.655223] [<ffffffff81c332d4>] kernel_thread_helper+0x4/0x10 [ 2374.655232] [<ffffffff81c2b880>] ? retint_restore_args+0xe/0xe [ 2374.655243] [<ffffffff8109c84d>] ? __init_kthread_worker+0x5b/0x5b [ 2374.655252] [<ffffffff81c332d0>] ? gs_change+0xb/0xb when aer happens, pci_walk_bus already have down_read(&pci_bus_sem)... then report_slot_reset ==> e1000_io_slot_reset ==> e1000e_disable_aspm ==> pci_disable_link_state... We can not use pci_disable_link_state, and it will try to hold pci_bus_sem again. Try to have __pci_disable_link_state that will not need to hold pci_bus_sem. -v2: change name to pci_disable_link_state_locked() according to Jesse. [jbarnes: make sure new function is exported for modules] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Fix uninitialized variable bug in AER injection codeWanlong Gao2011-05-101-1/+1
| | | | | | | | | If it was preempted, and the variable aer_mask_override is changed after the spin_unlock_irqrestore it will write an uninitialized variable by the pci_write_config_dword() function. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Enable ASPM state clearing regardless of policyAlex Williamson2011-05-101-1/+1
| | | | | | | | | | Commit 2f671e2d allowed us to clear ASPM state when the FADT tells us it isn't supported, but we don't put this into effect if the aspm_policy is set to POLICY_POWERSAVE. Enable the state to be cleared regardless of policy. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-03-252-4/+34
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Disable ASPM when _OSC control is not granted for PCIe services PCI: Changing ASPM policy, via /sys, to POWERSAVE could cause NMIs PCI: PCIe links may not get configured for ASPM under POWERSAVE mode PCI/ACPI: Report ASPM support to BIOS if not disabled from command line
| * PCI: Disable ASPM when _OSC control is not granted for PCIe servicesNaga Chumbalkar2011-03-211-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | v3 -> v2: Added text to describe the problem v2 -> v1: Split this patch from v1 v1 : Part of: http://marc.info/?l=linux-pci&m=130042212003242&w=2 Disable ASPM when no _OSC control for PCIe services is granted by the BIOS. This is to protect systems with a buggy BIOS that did not set the ACPI FADT "ASPM Controls" bit even though the underlying HW can't do ASPM. To turn "on" ASPM the minimum the BIOS needs to do: 1. Clear the ACPI FADT "ASPM Controls" bit. 2. Support _OSC appropriately There is no _OSC Control bit for ASPM. However, we expect the BIOS to support _OSC for a Root Bridge that originates a PCIe hierarchy. If this is not the case - we are better off not enabling ASPM on that server. Commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the Platform won't provide _OSC control for PCIe) describes the above scenario. To quote verbatim from there: [The PCI SIG documentation for the _OSC OS/firmware handshaking interface states: "If the _OSC control method is absent from the scope of a host bridge device, then the operating system must not enable or attempt to use any features defined in this section for the hierarchy originated by the host bridge." The obvious interpretation of this is that the OS should not attempt to use PCIe hotplug, PME or AER - however, the specification also notes that an _OSC method is *required* for PCIe hierarchies, and experimental validation with An Alternative OS indicates that it doesn't use any PCIe functionality if the _OSC method is missing. That arguably means we shouldn't be using MSI or extended config space, but right now our problems seem to be limited to vendors being surprised when ASPM gets enabled on machines when other OSs refuse to do so. So, for now, let's just disable ASPM if the _OSC method doesn't exist or refuses to hand over PCIe capability control.] Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: Changing ASPM policy, via /sys, to POWERSAVE could cause NMIsNaga Chumbalkar2011-03-211-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | v3 -> v2: Modified the text that describes the problem v2 -> v1: Returned -EPERM v1 : http://marc.info/?l=linux-pci&m=130013194803727&w=2 For servers whose hardware cannot handle ASPM the BIOS ought to set the FADT bit shown below: In Sec 5.2.9.3 (IA-PC Boot Arch. Flags) of ACPI4.0a Specification, please see Table 5-11: PCIe ASPM Controls: If set, indicates to OSPM that it must not enable OPSM ASPM control on this platform. However there are shipping servers whose BIOS did not set this bit. (An example is the HP ProLiant DL385 G6. A Maintenance BIOS will fix that). For such servers even if a call is made via pci_no_aspm(), based on _OSC support in the BIOS, it may be too late because the ASPM code may have already allocated and filled its "link_list". So if a user sets the ASPM "policy" to "powersave" via /sys then pcie_aspm_set_policy() will run through the "link_list" and re-configure ASPM policy on devices that advertise ASPM L0s/L1 capability: # echo powersave > /sys/module/pcie_aspm/parameters/policy # cat /sys/module/pcie_aspm/parameters/policy default performance [powersave] That can cause NMIs since the hardware doesn't play well with ASPM: [ 1651.906015] NMI: PCI system error (SERR) for reason b1 on CPU 0. [ 1651.906015] Dazed and confused, but trying to continue Ideally, the BIOS should have set that FADT bit in the first place but we could be more robust - especially given the fact that Windows doesn't cause NMIs in the above scenario. There should be a sanity check to not allow a user to modify ASPM policy when aspm_disabled is set. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: PCIe links may not get configured for ASPM under POWERSAVE modeNaga Chumbalkar2011-03-211-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | v3 -> v2: Moved ASPM enabling logic to pci_set_power_state() v2 -> v1: Preserved the logic in pci_raw_set_power_state() : Added ASPM enabling logic after scanning Root Bridge : http://marc.info/?l=linux-pci&m=130046996216391&w=2 v1 : http://marc.info/?l=linux-pci&m=130013164703283&w=2 The assumption made in commit 41cd766b065970ff6f6c89dd1cf55fa706c84a3d (PCI: Don't enable aspm before drivers have had a chance to veto it) that pci_enable_device() will result in re-configuring ASPM when aspm_policy is POWERSAVE is no longer valid. This is due to commit 97c145f7c87453cec90e91238fba5fe2c1561b32 (PCI: read current power state at enable time) which resets dev->current_state to D0. Due to this the call to pcie_aspm_pm_state_change() is never made. Note the equality check (below) that returns early: ./drivers/pci/pci.c: pci_raw_set_pci_power_state() 546 /* Check if we're already there */ 547 if (dev->current_state == state) 548 return 0; Therefore OSPM never configures the PCIe links for ASPM to turn them "on". Fix it by configuring ASPM from the pci_enable_device() code path. This also allows a driver such as the e1000e networking driver a chance to disable ASPM (L0s, L1), if need be, prior to enabling the device. A driver may perform this action if the device is known to mis-behave wrt ASPM. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI/ACPI: Report ASPM support to BIOS if not disabled from command lineRafael J. Wysocki2011-03-211-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to distinguish the situation in which ASPM support is disabled from the command line or through .config from the situation in which it is disabled, because the hardware or BIOS can't handle it. In the former case we should not report ASPM support to the BIOS through ACPI _OSC, but in the latter case we should do that. Introduce pcie_aspm_support_enabled() that can be used by acpi_pci_root_add() to determine whether or not it should report ASPM support to the BIOS through _OSC. Cc: stable@kernel.org References: https://bugzilla.kernel.org/show_bug.cgi?id=29722 References: https://bugzilla.kernel.org/show_bug.cgi?id=20232 Reported-and-tested-by: Ortwin Glück <odi@odi.ch> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | Merge branch 'linus' into releaseLen Brown2011-03-231-3/+28
|\ \ | |/ | | | | | | | | | | Conflicts: arch/x86/kernel/acpi/sleep.c Signed-off-by: Len Brown <len.brown@intel.com>
| * PCI: aer-inject: Override PCIe AER Mask RegistersPrarit Bhargava2011-03-041-3/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have several systems which have the same problem: The PCIe AER corrected and uncorrected masks have all the error bits set. This results in the inablility to test with the aer_inject module & utility on those systems. Add the 'aer_mask_override' module parameter which will override the corrected or uncorrected masks for a PCI device. The mask will have the bit corresponding to the status passed into the aer_inject() function. After this patch it is possible to successfully use the aer_inject utility on those PCI slots. Successfully tested by me on a Dell and Intel whitebox which exhibited the mask problem. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | ACPI, APEI, Add PCIe AER error information printing supportHuang Ying2011-03-212-8/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AER error information printing support is implemented in drivers/pci/pcie/aer/aer_print.c. So some string constants, functions and macros definitions can be re-used without being exported. The original PCIe AER error information printing function is not re-used directly because the overall format is quite different. And changing the original printing format may make some original users' scripts broken. Signed-off-by: Huang Ying <ying.huang@intel.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | PCIe, AER, use pre-generated prefix in error information printingHuang Ying2011-03-211-75/+48
|/ | | | | | | | | | | | | | | | | | | | | | | When printing PCIe AER error information, each line is prefixed with PCIe device and driver information. In original implementation, the prefix is generated when each line is printed. In fact, all lines share the same prefix. So this patch pre-generated the prefix, and use that one when each line is printed. In addition to common prefix can be pre-generated, the trailing white spaces in string constants and NULLs in char * array constants can be removed too. These can reduce the object file size further. The size of object file before and after changing is as follow: text data bss dec before: 3038 0 0 3038 after: 2118 0 0 2118 Signed-off-by: Huang Ying <ying.huang@intel.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes2011-01-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PCI/PM: Report wakeup events before resuming devicesRafael J. Wysocki2011-01-141-2/+2
| | | | | | | | | Make wakeup events be reported by the PCI subsystem before attempting to resume devices or queuing up runtime resume requests for them, because wakeup events should be reported as soon as they have been detected. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/ACPI: Request _OSC control once for each root bridge (v3)Rafael J. Wysocki2011-01-144-25/+5
| | | | | | | | | | | | | | Move the evaluation of acpi_pci_osc_control_set() (to request control of PCI Express native features) into acpi_pci_root_add() to avoid calling it many times for the same root complex with the same arguments. Additionally, check if all of the requisite _OSC support bits are set before calling acpi_pci_osc_control_set() for a given root complex. References: https://bugzilla.kernel.org/show_bug.cgi?id=20232 Reported-by: Ozan Caglayan <ozan@pardus.org.tr> Tested-by: Ozan Caglayan <ozan@pardus.org.tr> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/PCIe: Clear Root PME Status bits early during system resumeRafael J. Wysocki2010-12-234-38/+53
| | | | | | | | | | | | | | | | | | | | I noticed that PCI Express PMEs don't work on my Toshiba Portege R500 after the system has been woken up from a sleep state by a PME (through Wake-on-LAN). After some investigation it turned out that the BIOS didn't clear the Root PME Status bit in the root port that received the wakeup PME and since the Requester ID was also set in the port's Root Status register, any subsequent PMEs didn't trigger interrupts. This problem can be avoided by clearing the Root PME Status bits in all PCI Express root ports during early resume. For this purpose, add an early resume routine to the PCIe port driver and make this driver be always registered, even if pci_ports_disable is set (in which case the driver's only function is to provide the early resume callback). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Disable ASPM if BIOS asks us toMatthew Garrett2010-12-231-4/+17
| | | | | | | | | | | | | We currently refuse to touch the ASPM registers if the BIOS tells us that ASPM isn't supported. This can cause problems if the BIOS has (for any reason) enabled ASPM on some devices anyway. Change the code such that we explicitly clear ASPM if the FADT indicates that ASPM isn't supported, and make sure we tidy up appropriately on device removal in order to deal with the hotplug case. If ASPM is disabled because the BIOS doesn't hand over control then we won't touch the registers. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'linux-next' of ↵Linus Torvalds2010-10-285-3/+40
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (27 commits) x86: allocate space within a region top-down x86: update iomem_resource end based on CPU physical address capabilities x86/PCI: allocate space from the end of a region, not the beginning PCI: allocate bus resources from the top down resources: support allocating space within a region from the top down resources: handle overflow when aligning start of available area resources: ensure callback doesn't allocate outside available space resources: factor out resource_clip() to simplify find_resource() resources: add a default alignf to simplify find_resource() x86/PCI: MMCONFIG: fix region end calculation PCI: Add support for polling PME state on suspended legacy PCI devices PCI: Export some PCI PM functionality PCI: fix message typo PCI: log vendor/device ID always PCI: update Intel chipset names and defines PCI: use new ccflags variable in Makefile PCI: add PCI_MSIX_TABLE/PBA defines PCI: add PCI vendor id for STmicroelectronics x86/PCI: irq and pci_ids patch for Intel Patsburg DeviceIDs PCI: OLPC: Only enable PCI configuration type override on XO-1 ...
| * PCI/PCIe/AER: Disable native AER service if BIOS has precedenceRafael J. Wysocki2010-10-154-2/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a design issue related to PCIe AER and _OSC that the BIOS may be asked to grant control of the AER service even if some Hardware Error Source Table (HEST) entries contain information meaning that the BIOS really should control it. Namely, pcie_port_acpi_setup() calls pcie_aer_get_firmware_first() that determines whether or not the AER service should be controlled by the BIOS on the basis of the HEST information for the given PCIe port. The BIOS is asked to grant control of the AER service for a PCIe Root Complex if pcie_aer_get_firmware_first() returns 'false' for at least one root port in that complex, even if all of the other root ports' HEST entries have the FIRMWARE_FIRST flag set (and none of them has the GLOBAL flag set). However, if the AER service is controlled by the kernel, that may interfere with the BIOS' handling of the error sources having the FIRMWARE_FIRST flag. Moreover, there may be PCIe endpoints that have the FIRMWARE_FIRST flag set in HEST and are attached to the root ports in question, in which case it also may be unsafe to ask the BIOS for control of the AER service. For this reason, introduce a function checking if there's at least one PCIe-related HEST entry with the FIRMWARE_FIRST flag set and disable the native AER service altogether if this function returns 'true'. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: aerdrv: fix uninitialized variable warningBill Pemberton2010-10-151-1/+1
| | | | | | | | | | | | | | | | quiet the warning about use of uninitialized e_src in aer_isr() e_src is initialized by get_e_source() Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | llseek: automatically add .llseek fopArnd Bergmann2010-10-151-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
* PCI: PCIe: Remove the port driver module exit routineKenji Kaneshige2010-08-241-7/+0
| | | | | | | | | The PCIe port driver's module exit routine is never used, so drop it. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: PCIe: Move PCIe PME code to the pcie directoryRafael J. Wysocki2010-08-243-8/+3
| | | | | | | | | The PCIe PME code only consists of one file, so it doesn't need to occupy its own directory. Move it to drivers/pci/pcie/pme.c and remove the contents of drivers/pci/pcie/pme . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: PCIe: Disable PCIe port services during port initializationRafael J. Wysocki2010-08-241-3/+26
| | | | | | | | | | In principle PCIe port services may be enabled by the BIOS, so it's better to disable them during port initialization to avoid spurious events from being generated. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: PCIe: Ask BIOS for control of all native services at onceRafael J. Wysocki2010-08-2411-201/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe) control of the PCIe Capability Structure is unconditionally requested by acpi_pci_root_add(), which in principle may cause problems to happen in two ways. First, the BIOS may refuse to give control of the PCIe Capability Structure if it is not asked for any of the _OSC features depending on it at the same time. Second, the BIOS may assume that control of the _OSC features depending on the PCIe Capability Structure will be requested in the future and may behave incorrectly if that doesn't happen. For this reason, control of the PCIe Capability Structure should always be requested along with control of any other _OSC features that may depend on it (ie. PCIe native PME, PCIe native hot-plug, PCIe AER). Rework the PCIe port driver so that (1) it checks which native PCIe port services can be enabled, according to the BIOS, and (2) it requests control of all these services simultaneously. In particular, this causes pcie_portdrv_probe() to fail if the BIOS refuses to grant control of the PCIe Capability Structure, which means that no native PCIe port services can be enabled for the PCIe Root Complex the given port belongs to. If that happens, ASPM is disabled to avoid problems with mishandling it by the part of the PCIe hierarchy for which control of the PCIe Capability Structure has not been received. Make it possible to override this behavior using 'pcie_ports=native' (use the PCIe native services regardless of the BIOS response to the control request), or 'pcie_ports=compat' (do not use the PCIe native services at all). Accordingly, rework the existing PCIe port service drivers so that they don't request control of the services directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI/PCI: Negotiate _OSC control bits before requesting them Rafael J. Wysocki2010-08-242-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | It is possible that the BIOS will not grant control of all _OSC features requested via acpi_pci_osc_control_set(), so it is recommended to negotiate the final set of _OSC features with the query flag set before calling _OSC to request control of these features. To implement it, rework acpi_pci_osc_control_set() so that the caller can specify the mask of _OSC control bits to negotiate and the mask of _OSC control bits that are absolutely necessary to it. Then, acpi_pci_osc_control_set() will run _OSC queries in a loop until the mask of _OSC control bits returned by the BIOS is equal to the mask passed to it. Also, before running the _OSC request acpi_pci_osc_control_set() will check if the caller's required control bits are present in the final mask. Using this mechanism we will be able to avoid situations in which the BIOS doesn't grant control of certain _OSC features, because they depend on some other _OSC features that have not been requested. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: PCIe: Introduce commad line switch for disabling port servicesRafael J. Wysocki2010-08-243-0/+20
| | | | | | | | | Introduce kernel command line switch pcie_ports= allowing one to disable all of the native PCIe port services, so that PCIe ports are treated like PCI-to-PCI bridges. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: PCIe AER: Introduce pci_aer_available()Rafael J. Wysocki2010-08-241-3/+6
| | | | | | | | Introduce a function allowing the caller to check whether to try to enable PCIe AER. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'linux-next' of ↵Linus Torvalds2010-08-063-16/+37
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (30 commits) PCI: update for owner removal from struct device_attribute PCI: Fix warnings when CONFIG_DMI unset PCI: Do not run NVidia quirks related to MSI with MSI disabled x86/PCI: use for_each_pci_dev() PCI: use for_each_pci_dev() PCI: MSI: Restore read_msi_msg_desc(); add get_cached_msi_msg_desc() PCI: export SMBIOS provided firmware instance and label to sysfs PCI: Allow read/write access to sysfs I/O port resources x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN PCI: remove unused HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_{SIZE|BOUNDARY} PCI: disable mmio during bar sizing PCI: MSI: Remove unsafe and unnecessary hardware access PCI: Default PCIe ASPM control to on and require !EMBEDDED to disable PCI: kernel oops on access to pci proc file while hot-removal PCI: pci-sysfs: remove casts from void* ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe PCI hotplug: make sure child bridges are enabled at hotplug time PCI hotplug: shpchp: Removed check for hotplug of display devices PCI hotplug: pciehp: Fixed return value sign for pciehp_unconfigure_device PCI: Don't enable aspm before drivers have had a chance to veto it ...
| * PCI: Default PCIe ASPM control to on and require !EMBEDDED to disableMatthew Garrett2010-07-301-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CONFIG_PCIEASPM option is confusing and potentially dangerous. ASPM is a hardware mediated feature rather than one under direct OS control, and even if the config option is disabled the system firmware may have turned on ASPM on various bits of hardware. This can cause problems later - various hardware that claims to support ASPM does a poor job of it and may hang or cause other difficulties. The kernel is able to recognise this in many cases and disable the ASPM functionality, but only if CONFIG_PCIEASPM is enabled. Given that in its default configuration this option will either leave the hardware as it was originally or disable hardware functionality that may cause problems, it should by default y. The only reason to disable it ought to be to reduce code size, so make it dependent on CONFIG_EMBEDDED. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: lrodriguez@atheros.com Cc: maximlevitsky@gmail.com Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: Don't enable aspm before drivers have had a chance to veto itMatthew Garrett2010-07-301-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The aspm code will currently set the configured aspm policy before drivers have had an opportunity to indicate that their hardware doesn't support it. Unfortunately, putting some hardware in L0 or L1 can result in the hardware no longer responding to any requests, even after aspm is disabled. It makes more sense to leave aspm policy at the BIOS defaults at initial setup time, reconfiguring it after pci_enable_device() is called. This allows the driver to blacklist individual devices beforehand. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI aerdrv: fix annoying warningsLinus Torvalds2010-07-301-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some compiler generates following warnings: In function 'aer_isr': warning: 'e_src.id' may be used uninitialized in this function warning: 'e_src.status' may be used uninitialized in this function Avoid status flag "int ret" and return constants instead, so that gcc sees the return value matching "it is initialized" better. Acked-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PM: Make it possible to avoid races between wakeup and system sleepRafael J. Wysocki2010-07-191-1/+4
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
* PCI/PM: Do not use native PCIe PME by defaultRafael J. Wysocki2010-06-181-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c7f486567c1d0acd2e4166c47069835b9f75e77b (PCI PM: PCIe PME root port service driver) causes the native PCIe PME signaling to be used by default, if the BIOS allows the kernel to control the standard configuration registers of PCIe root ports. However, the native PCIe PME is coupled to the native PCIe hotplug and calling pcie_pme_acpi_setup() makes some BIOSes expect that the native PCIe hotplug will be used as well. That, in turn, causes problems to appear on systems where the PCIe hotplug driver is not loaded. The usual symptom, as reported by Jaroslav Kameník and others, is that the ACPI GPE associated with PCIe hotplug keeps firing continuously causing kacpid to take substantial percentage of CPU time. To work around this issue, change the default so that the native PCIe PME signaling is only used if directly requested with the help of the pcie_pme= command line switch. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15924 , which is a listed regression from 2.6.33. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Jaroslav Kameník <jaroslav@kamenik.cz> Tested-by: Antoni Grzymala <antekgrzymala@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'release' of ↵Linus Torvalds2010-05-283-4/+98
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits) ACPI: Don't let acpi_pad needlessly mark TSC unstable drivers/acpi/sleep.h: Checkpatch cleanup ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion ACPI: delete unused c-state promotion/demotion data strucutures ACPI: video: fix acpi_backlight=video ACPI: EC: Use kmemdup drivers/acpi: use kasprintf ACPI, APEI, EINJ injection parameters support Add x64 support to debugfs ACPI, APEI, Use ERST for persistent storage of MCE ACPI, APEI, Error Record Serialization Table (ERST) support ACPI, APEI, Generic Hardware Error Source memory error support ACPI, APEI, UEFI Common Platform Error Record (CPER) header Unified UUID/GUID definition ACPI Hardware Error Device (PNP0C33) support ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setup ACPI, APEI, Document for APEI ACPI, APEI, EINJ support ACPI, APEI, HEST table parsing ACPI, APEI, APEI supporting infrastructure ...
| * ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setupHuang Ying2010-05-193-4/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | Now, a dedicated HEST tabling parsing code is used for PCIE AER firmware_first setup. It is rebased on general HEST tabling parsing code of APEI. The firmware_first setup code is moved from PCI core to AER driver too, because it is only AER related. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Len Brown <len.brown@intel.com>
* | PCI: aerdrv: trivial cleanup for aerdrv_core.cHidetoshi Seto2010-05-111-11/+10
| | | | | | | | | | | | | | | | Style cleanup for pci_{en,dis}able_pcie_error_reporting(). Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: aerdrv: trivial cleanup for aerdrv.cHidetoshi Seto2010-05-111-14/+10
| | | | | | | | | | | | | | | | | | Skip zero-ing in aer_alloc_rpc() since it is allocated by kzalloc(). The closing comment marker "*/" is recommended for kernel-doc comments. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: aerdrv: introduce default_downstream_reset_linkHidetoshi Seto2010-05-113-39/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed that when I inject a fatal error to an endpoint via aer-inject, aer_root_reset() is called as reset_link for a downstream port at upstream of the endpoint: pcieport 0000:00:06.0: AER: Uncorrected (Fatal) error received: id=5401 : pcieport 0000:52:02.0: Root Port link has been reset It externally appears to be working, but internally issues some accesses to PCI_ERR_ROOT_COMMAND/STATUS registers that is for root port so not available on downstream port. This patch introduces default_downstream_reset_link that is a version of aer_root_reset() with no accesses to root port's register. It is used for downstream ports that has no reset_link function its specific. This patch also updates related description in pcieaer-howto.txt. Some minor fixes are included. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: aerdrv: rework find_aer_serviceHidetoshi Seto2010-05-111-21/+16
| | | | | | | | | | | | | | | | | | The structure find_aer_service_data is no longer useful. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: aerdrv: remove is_downstreamHidetoshi Seto2010-05-111-21/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pcie->port of port service device points the port associated the service with. The find_aer_service iterates over children of given port udev. So it is clear that the pcie->port of port service of given port udev must always point the udev. Therefore we can know the type of udev without checking its children. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKSHidetoshi Seto2010-05-112-4/+1
| | | | | | | | | | | | | | | | Make it clear that we only interest in 2 *_RCV bits. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRCHidetoshi Seto2010-05-112-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The Error Source Identification Register (Offset 34h) is 4 byte which contains a couple of 2 byte field, "[15:0] ERR_COR Source Identification" and "[31:16] ERR_FATAL/NONFATAL Source Identification." This patch defines PCI_ERR_ROOT_ERR_SRC to make dword access sensible. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: aerdrv: rework do_recoveryHidetoshi Seto2010-05-111-21/+17
| | | | | | | | | | | | | | | | | | Move dev_printks for debug into do_recovery(). This allows do_recovery() to return void. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: aerdrv: rework get_e_source()Hidetoshi Seto2010-05-111-32/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current get_e_source() returns pointer to an element of array. However since it also progress consume counter, it is possible that the element is overwritten by newly produced data before the element is really consumed. This patch changes get_e_source() to copy contents of the element to address pointed by its caller. Once copied the element in array can be consumed. And relocate this function to more innocuous place. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v1.1 at 2024-05-11 19:59:29 +0000