aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci
Commit message (Collapse)AuthorAgeFilesLines
* remove firmware files, merge more uncritical stuff from 3.0.101Wolfgang Wiedmeyer2015-10-231-0/+4
|
* merged 3.0.101 tagWolfgang Wiedmeyer2015-10-224-37/+40
|
* Merge remote-tracking branch 'kernelorg/linux-3.0.y' into 3_0_64Andrew Dodd2013-02-278-79/+221
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/Kconfig arch/arm/include/asm/hwcap.h arch/arm/kernel/smp.c arch/arm/plat-samsung/adc.c drivers/gpu/drm/i915/i915_reg.h drivers/gpu/drm/i915/intel_drv.h drivers/mmc/core/sd.c drivers/net/tun.c drivers/net/usb/usbnet.c drivers/regulator/max8997.c drivers/usb/core/hub.c drivers/usb/host/xhci.h drivers/usb/serial/qcserial.c fs/jbd2/transaction.c include/linux/migrate.h kernel/sys.c kernel/time/timekeeping.c lib/genalloc.c mm/memory-failure.c mm/memory_hotplug.c mm/mempolicy.c mm/page_alloc.c mm/vmalloc.c mm/vmscan.c mm/vmstat.c scripts/Kbuild.include Change-Id: I91e2d85c07320c7ccfc04cf98a448e89bed6ade6
| * PCI: Allow pcie_aspm=force even when FADT indicates it is unsupportedColin Ian King2013-01-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 9e16721498b0c3d3ebfa0b503c63d35c0a4c0642 upstream. Right now using pcie_aspm=force will not enable ASPM if the FADT indicates ASPM is unsupported. However, the semantics of force should probably allow for this, especially as they did before 3c076351c4 ("PCI: Rework ASPM disable code") This patch just skips the clearing of any ASPM setup that the firmware has carried out on this bus if pcie_aspm=force is being used. Reference: http://bugs.launchpad.net/bugs/962038 Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * intel-iommu: Prevent devices with RMRRs from being placed into SI DomainTom Mingarelli2013-01-211-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ea2447f700cab264019b52e2b417d689e052dcfd upstream. This patch is to prevent non-USB devices that have RMRRs associated with them from being placed into the SI Domain during init. This fixes the issue where the RMRR info for devices being placed in and out of the SI Domain gets lost. Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Tested-by: Shuah Khan <shuah.khan@hp.com> Reviewed-by: Donald Dutile <ddutile@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * intel-iommu: Free old page tables before creating superpageWoodhouse, David2013-01-171-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6491d4d02893d9787ba67279595990217177b351 upstream. The dma_pte_free_pagetable() function will only free a page table page if it is asked to free the *entire* 2MiB range that it covers. So if a page table page was used for one or more small mappings, it's likely to end up still present in the page tables... but with no valid PTEs. This was fine when we'd only be repopulating it with 4KiB PTEs anyway but the same virtual address range can end up being reused for a *large-page* mapping. And in that case were were trying to insert the large page into the second-level page table, and getting a complaint from the sanity check in __domain_mapping() because there was already a corresponding entry. This was *relatively* harmless; it led to a memory leak of the old page table page, but no other ill-effects. Fix it by calling dma_pte_clear_range (hopefully redundant) and dma_pte_free_pagetable() before setting up the new large page. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Tested-by: Ravi Murty <Ravi.Murty@intel.com> Tested-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHzAndy Lutomirski2013-01-111-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 812089e01b9f65f90fc8fc670d8cce72a0e01fbb upstream. Otherwise it fails like this on cards like the Transcend 16GB SDHC card: mmc0: new SDHC card at address b368 mmcblk0: mmc0:b368 SDC 15.0 GiB mmcblk0: error -110 sending status command, retrying mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0 Tested on my Lenovo x200 laptop. [bhelgaas: changelog] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Chris Ball <cjb@laptop.org> CC: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * PCI : Calculate right add_sizeYinghai Lu2012-11-262-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a4ac9fea016fc5c09227eb479bd35e34978323a4 upstream. During debug of one SRIOV enabled hotplug device, we found found that add_size is not passed properly. The device has devices under two level bridges: +-[0000:80]-+-00.0-[81-8f]-- | +-01.0-[90-9f]-- | +-02.0-[a0-af]----00.0-[a1-a3]--+-02.0-[a2]--+-00.0 Oracle Corporation Device | | \-03.0-[a3]--+-00.0 Oracle Corporation Device Which means later the parent bridge will not try to add a big enough range: [ 557.455077] pci 0000:a0:00.0: BAR 14: assigned [mem 0xf9000000-0xf93fffff] [ 557.461974] pci 0000:a0:00.0: BAR 15: assigned [mem 0xf6000000-0xf61fffff pref] [ 557.469340] pci 0000:a1:02.0: BAR 14: assigned [mem 0xf9000000-0xf91fffff] [ 557.476231] pci 0000:a1:02.0: BAR 15: assigned [mem 0xf6000000-0xf60fffff pref] [ 557.483582] pci 0000:a1:03.0: BAR 14: assigned [mem 0xf9200000-0xf93fffff] [ 557.490468] pci 0000:a1:03.0: BAR 15: assigned [mem 0xf6100000-0xf61fffff pref] [ 557.497833] pci 0000:a1:03.0: BAR 14: can't assign mem (size 0x200000) [ 557.504378] pci 0000:a1:03.0: failed to add optional resources res=[mem 0xf9200000-0xf93fffff] [ 557.513026] pci 0000:a1:02.0: BAR 14: can't assign mem (size 0x200000) [ 557.519578] pci 0000:a1:02.0: failed to add optional resources res=[mem 0xf9000000-0xf91fffff] It turns out we did not calculate size1 properly. static resource_size_t calculate_memsize(resource_size_t size, resource_size_t min_size, resource_size_t size1, resource_size_t old_size, resource_size_t align) { if (size < min_size) size = min_size; if (old_size == 1 ) old_size = 0; if (size < old_size) size = old_size; size = ALIGN(size + size1, align); return size; } We should not pass add_size with min_size in calculate_memsize since that will make add_size not contribute final add_size. So just pass add_size with size1 to calculate_memsize(). With this change, we should have chance to remove extra addon in pci_reassign_resource. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Andrew Worsley <amworsley@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * PCI : ability to relocate assigned pci-resourcesRam Pai2012-11-262-67/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2bbc6942273b5b3097bd265d82227bdd84b351b2 upstream. Currently pci-bridges are allocated enough resources to satisfy their immediate requirements. Any additional resource-requests fail if additional free space, contiguous to the one already allocated, is not available. This behavior is not reasonable since sufficient contiguous resources, that can satisfy the request, are available at a different location. This patch provides the ability to expand and relocate a allocated resource. v2: Changelog: Fixed size calculation in pci_reassign_resource() v3: Changelog : Split this patch. The resource.c changes are already upstream. All the pci driver changes are in here. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Andrew Worsley <amworsley@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * intel-iommu: Fix AB-BA lockdep reportRoland Dreier2012-11-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3e7abe2556b583e87dabda3e0e6178a67b20d06f upstream. When unbinding a device so that I could pass it through to a KVM VM, I got the lockdep report below. It looks like a legitimate lock ordering problem: - domain_context_mapping_one() takes iommu->lock and calls iommu_support_dev_iotlb(), which takes device_domain_lock (inside iommu->lock). - domain_remove_one_dev_info() starts by taking device_domain_lock then takes iommu->lock inside it (near the end of the function). So this is the classic AB-BA deadlock. It looks like a safe fix is to simply release device_domain_lock a bit earlier, since as far as I can tell, it doesn't protect any of the stuff accessed at the end of domain_remove_one_dev_info() anyway. BTW, the use of device_domain_lock looks a bit unsafe to me... it's at least not obvious to me why we aren't vulnerable to the race below: iommu_support_dev_iotlb() domain_remove_dev_info() lock device_domain_lock find info unlock device_domain_lock lock device_domain_lock find same info unlock device_domain_lock free_devinfo_mem(info) do stuff with info after it's free However I don't understand the locking here well enough to know if this is a real problem, let alone what the best fix is. Anyway here's the full lockdep output that prompted all of this: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.39.1+ #1 ------------------------------------------------------- bash/13954 is trying to acquire lock: (&(&iommu->lock)->rlock){......}, at: [<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230 but task is already holding lock: (device_domain_lock){-.-...}, at: [<ffffffff812f6508>] domain_remove_one_dev_info+0x208/0x230 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (device_domain_lock){-.-...}: [<ffffffff8109ca9d>] lock_acquire+0x9d/0x130 [<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0 [<ffffffff812f8350>] domain_context_mapping_one+0x600/0x750 [<ffffffff812f84df>] domain_context_mapping+0x3f/0x120 [<ffffffff812f9175>] iommu_prepare_identity_map+0x1c5/0x1e0 [<ffffffff81ccf1ca>] intel_iommu_init+0x88e/0xb5e [<ffffffff81cab204>] pci_iommu_init+0x16/0x41 [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff81ca3d3f>] kernel_init+0xe3/0x168 [<ffffffff8157ac24>] kernel_thread_helper+0x4/0x10 -> #0 (&(&iommu->lock)->rlock){......}: [<ffffffff8109bf3e>] __lock_acquire+0x195e/0x1e10 [<ffffffff8109ca9d>] lock_acquire+0x9d/0x130 [<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0 [<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230 [<ffffffff812f8b42>] device_notifier+0x72/0x90 [<ffffffff8157555c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089768>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff810897b6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff81373a5c>] __device_release_driver+0xbc/0xe0 [<ffffffff81373ccf>] device_release_driver+0x2f/0x50 [<ffffffff81372ee3>] driver_unbind+0xa3/0xc0 [<ffffffff813724ac>] drv_attr_store+0x2c/0x30 [<ffffffff811e4506>] sysfs_write_file+0xe6/0x170 [<ffffffff8117569e>] vfs_write+0xce/0x190 [<ffffffff811759e4>] sys_write+0x54/0xa0 [<ffffffff81579a82>] system_call_fastpath+0x16/0x1b other info that might help us debug this: 6 locks held by bash/13954: #0: (&buffer->mutex){+.+.+.}, at: [<ffffffff811e4464>] sysfs_write_file+0x44/0x170 #1: (s_active#3){++++.+}, at: [<ffffffff811e44ed>] sysfs_write_file+0xcd/0x170 #2: (&__lockdep_no_validate__){+.+.+.}, at: [<ffffffff81372edb>] driver_unbind+0x9b/0xc0 #3: (&__lockdep_no_validate__){+.+.+.}, at: [<ffffffff81373cc7>] device_release_driver+0x27/0x50 #4: (&(&priv->bus_notifier)->rwsem){.+.+.+}, at: [<ffffffff8108974f>] __blocking_notifier_call_chain+0x5f/0xb0 #5: (device_domain_lock){-.-...}, at: [<ffffffff812f6508>] domain_remove_one_dev_info+0x208/0x230 stack backtrace: Pid: 13954, comm: bash Not tainted 2.6.39.1+ #1 Call Trace: [<ffffffff810993a7>] print_circular_bug+0xf7/0x100 [<ffffffff8109bf3e>] __lock_acquire+0x195e/0x1e10 [<ffffffff810972bd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8109d57d>] ? trace_hardirqs_on_caller+0x13d/0x180 [<ffffffff8109ca9d>] lock_acquire+0x9d/0x130 [<ffffffff812f6421>] ? domain_remove_one_dev_info+0x121/0x230 [<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0 [<ffffffff812f6421>] ? domain_remove_one_dev_info+0x121/0x230 [<ffffffff810972bd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230 [<ffffffff812f8b42>] device_notifier+0x72/0x90 [<ffffffff8157555c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089768>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff810897b6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff81373a5c>] __device_release_driver+0xbc/0xe0 [<ffffffff81373ccf>] device_release_driver+0x2f/0x50 [<ffffffff81372ee3>] driver_unbind+0xa3/0xc0 [<ffffffff813724ac>] drv_attr_store+0x2c/0x30 [<ffffffff811e4506>] sysfs_write_file+0xe6/0x170 [<ffffffff8117569e>] vfs_write+0xce/0x190 [<ffffffff811759e4>] sys_write+0x54/0xa0 [<ffffffff81579a82>] system_call_fastpath+0x16/0x1b Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * PCI: Check P2P bridge for invalid secondary/subordinate rangeYinghai Lu2012-10-131-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1965f66e7db08d1ebccd24a59043eba826cc1ce8 upstream. For bridges with "secondary > subordinate", i.e., invalid bus number apertures, we don't enumerate anything behind the bridge unless the user specified "pci=assign-busses". This patch makes us automatically try to reassign the downstream bus numbers in this case (just for that bridge, not for all bridges as "pci=assign-busses" does). We don't discover all the devices on the Intel DP43BF motherboard without this change (or "pci=assign-busses") because its BIOS configures a bridge as: pci 0000:00:1e.0: PCI bridge to [bus 20-08] (subtractive decode) [bhelgaas: changelog, change message to dev_info] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18412 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=625754 Reported-by: Brian C. Huffman <bhuffman@graze.net> Reported-by: VL <vl.homutov@gmail.com> Tested-by: VL <vl.homutov@gmail.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * PCI: acpiphp: check whether _ADR evaluation succeededBjorn Helgaas2012-10-131-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit dfb117b3e50c52c7b3416db4a4569224b8db80bb upstream. Check whether we evaluated _ADR successfully. Previously we ignored failure, so we would have used garbage data from the stack as the device and function number. We return AE_OK so that we ignore only this slot and continue looking for other slots. Found by Coverity (CID 113981). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> [bwh: Backported to 2.6.32/3.0: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * PCI: honor child buses add_size in hot plug configurationYinghai Lu2012-10-071-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit be768912a49b10b68e96fbd8fa3cab0adfbd3091 upstream. git commit c8adf9a3e873eddaaec11ac410a99ef6b9656938 "PCI: pre-allocate additional resources to devices only after successful allocation of essential resources." fails to take into consideration the optional-resources needed by children devices while calculating the optional-resource needed by the bridge. This can be a problem on some setup. For example, if a hotplug bridge has 8 children hotplug bridges, the bridge should have enough resources to accomodate the hotplug requirements for each of its children hotplug bridges. Currently this is not the case. This patch fixes the problem. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Andrew Worsley <amworsley@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * PCI: EHCI: Fix crash during hibernation on ASUS computersRafael J. Wysocki2012-09-141-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 0b68c8e2c3afaf9807eb1ebe0ccfb3b809570aa4 upstream. Commit dbf0e4c (PCI: EHCI: fix crash during suspend on ASUS computers) added a workaround for an ASUS suspend issue related to USB EHCI and a bug in a number of ASUS BIOSes that attempt to shut down the EHCI controller during system suspend if its PCI command register doesn't contain 0 at that time. It turns out that the same workaround is necessary in the analogous hibernation code path, so add it. References: https://bugzilla.kernel.org/show_bug.cgi?id=45811 Reported-and-tested-by: Oleksij Rempel <bug-track@fisher-privat.net> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * PCI: EHCI: fix crash during suspend on ASUS computersAlan Stern2012-07-163-31/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit dbf0e4c7257f8d684ec1a3c919853464293de66e upstream. Quite a few ASUS computers experience a nasty problem, related to the EHCI controllers, when going into system suspend. It was observed that the problem didn't occur if the controllers were not put into the D3 power state before starting the suspend, and commit 151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during suspend on ASUS computers) was created to do this. It turned out this approach messed up other computers that didn't have the problem -- it prevented USB wakeup from working. Consequently commit c2fb8a3fa25513de8fedb38509b1f15a5bbee47b (USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2) was merged; it reverted the earlier commit and added a whitelist of known good board names. Now we know the actual cause of the problem. Thanks to AceLan Kao for tracking it down. According to him, an engineer at ASUS explained that some of their BIOSes contain a bug that was added in an attempt to work around a problem in early versions of Windows. When the computer goes into S3 suspend, the BIOS tries to verify that the EHCI controllers were first quiesced by the OS. Nothing's wrong with this, but the BIOS does it by checking that the PCI COMMAND registers contain 0 without checking the controllers' power state. If the register isn't 0, the BIOS assumes the controller needs to be quiesced and tries to do so. This involves making various MMIO accesses to the controller, which don't work very well if the controller is already in D3. The end result is a system hang or memory corruption. Since the value in the PCI COMMAND register doesn't matter once the controller has been suspended, and since the value will be restored anyway when the controller is resumed, we can work around the BIOS bug simply by setting the register to 0 during system suspend. This patch (as1590) does so and also reverts the second commit mentioned above, which is now unnecessary. In theory we could do this for every PCI device. However to avoid introducing new problems, the patch restricts itself to EHCI host controllers. Finally the affected systems can suspend with USB wakeup working properly. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=37632 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42728 Based-on-patch-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dâniel Fraga <fragabr@gmail.com> Tested-by: Javier Marcet <jmarcet@gmail.com> Tested-by: Andrey Rahmatullin <wrar@wrar.name> Tested-by: Oleksij Rempel <bug-track@fisher-privat.net> Tested-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2Alan Stern2012-06-222-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c2fb8a3fa25513de8fedb38509b1f15a5bbee47b upstream. This patch (as1558) fixes a problem affecting several ASUS computers: The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep. After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep. The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs. A similar patch has already been applied as commit 151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during suspend on ASUS computers). The patch supersedes that one and reverts it. There are two differences: The old patch added the flag at the USB level; this patch adds it at the PCI level. The old patch applied to all chipsets with the same vendor, subsystem vendor, and product IDs; this patch makes an exception for a known-good system (based on DMI information). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dâniel Fraga <fragabr@gmail.com> Tested-by: Andrey Rahmatullin <wrar@wrar.name> Tested-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge linux-3.0.31 from korg into jellybeancodeworkx2012-09-185-22/+96
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mm/proc-v7.S drivers/base/core.c drivers/gpu/drm/i915/i915_gem_execbuffer.c drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_lvds.c drivers/gpu/drm/radeon/evergreen.c drivers/gpu/drm/radeon/r100.c drivers/gpu/drm/radeon/radeon_connectors.c drivers/gpu/drm/radeon/rs600.c drivers/usb/core/hub.c drivers/usb/host/xhci-pci.c drivers/usb/host/xhci.c drivers/usb/serial/qcserial.c fs/proc/base.c Change-Id: Ia98b35db3f8c0bfd95817867d3acb85be8e5e772
| * PCI: Add quirk for still enabled interrupts on Intel Sandy Bridge GPUsThomas Jarosch2012-04-271-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f67fd55fa96f7d7295b43ffbc4a97d8f55e473aa upstream. Some BIOS implementations leave the Intel GPU interrupts enabled, even though no one is handling them (f.e. i915 driver is never loaded). Additionally the interrupt destination is not set up properly and the interrupt ends up -somewhere-. These spurious interrupts are "sticky" and the kernel disables the (shared) interrupt line after 100.000+ generated interrupts. Fix it by disabling the still enabled interrupts. This resolves crashes often seen on monitor unplug. Tested on the following boards: - Intel DH61CR: Affected - Intel DH67BL: Affected - Intel S1200KP server board: Affected - Asus P8H61-M LE: Affected, but system does not crash. Probably the IRQ ends up somewhere unnoticed. According to reports on the net, the Intel DH61WW board is also affected. Many thanks to Jesse Barnes from Intel for helping with the register configuration and to Intel in general for providing public hardware documentation. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Tested-by: Charlie Suffin <charlie.suffin@stratus.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * ASPM: Fix pcie devices with non-pcie childrenMatthew Garrett2012-04-021-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c9651e70ad0aa499814817cbf3cc1d0b806ed3a1 upstream. Since 3.2.12 and 3.3, some systems are failing to boot with a BUG_ON. Some other systems using the pata_jmicron driver fail to boot because no disks are detected. Passing pcie_aspm=force on the kernel command line works around it. The cause: commit 4949be16822e ("PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled") changed the behaviour of pcie_aspm_sanity_check() to always return 0 if aspm is disabled, in order to avoid cases where we changed ASPM state on pre-PCIe 1.1 devices. This skipped the secondary function of pcie_aspm_sanity_check which was to avoid us enabling ASPM on devices that had non-PCIe children, causing trouble later on. Move the aspm_disabled check so we continue to honour that scenario. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42979 and http://bugs.debian.org/665420 Reported-by: Romain Francoise <romain@orebokech.com> # kernel panic Reported-by: Chris Holland <bandidoirlandes@gmail.com> # disk detection trouble Signed-off-by: Matthew Garrett <mjg@redhat.com> Tested-by: Hatem Masmoudi <hatem.masmoudi@gmail.com> # Dell Latitude E5520 Tested-by: janek <jan0x6c@gmail.com> # pata_jmicron with JMB362/JMB363 [jn: with more symptoms in log message] Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * PCI: ignore pre-1.1 ASPM quirking when ASPM is disabledMatthew Garrett2012-03-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4949be16822e92a18ea0cc1616319926628092ee upstream. Right now we won't touch ASPM state if ASPM is disabled, except in the case where we find a device that appears to be too old to reliably support ASPM. Right now we'll clear it in that case, which is almost certainly the wrong thing to do. The easiest way around this is just to disable the blacklisting when ASPM is disabled. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * PCI: workaround hard-wired bus number V2Yinghai Lu2012-02-291-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 71f6bd4a23130cd2f4b036010c5790b1295290b9 upstream. Fixes PCI device detection on IBM xSeries IBM 3850 M2 / x3950 M2 when using ACPI resources (_CRS). This is default, a manual workaround (without this patch) would be pci=nocrs boot param. V2: Add dev_warn if the workaround is hit. This should reveal how common such setups are (via google) and point to possible problems if things are still not working as expected. -> Suggested by Jan Beulich. Tested-by: garyhade@us.ibm.com Signed-off-by: Yinghai Lu <yinghai.lu@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * PCI: Rework ASPM disable codeMatthew Garrett2012-02-062-22/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3c076351c4027a56d5005a39a0b518a4ba393ce2 upstream. Right now we forcibly clear ASPM state on all devices if the BIOS indicates that the feature isn't supported. Based on the Microsoft presentation "PCI Express In Depth for Windows Vista and Beyond", I'm starting to think that this may be an error. The implication is that unless the platform grants full control via _OSC, Windows will not touch any PCIe features - including ASPM. In that case clearing ASPM state would be an error unless the platform has granted us that control. This patch reworks the ASPM disabling code such that the actual clearing of state is triggered by a successful handoff of PCIe control to the OS. The general ASPM code undergoes some changes in order to ensure that the ability to clear the bits isn't overridden by ASPM having already been disabled. Further, this theoretically now allows for situations where only a subset of PCIe roots hand over control, leaving the others in the BIOS state. It's difficult to know for sure that this is the right thing to do - there's zero public documentation on the interaction between all of these components. But enough vendors enable ASPM on platforms and then set this bit that it seems likely that they're expecting the OS to leave them alone. Measured to save around 5W on an idle Thinkpad X220. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * PCI: msi: Disable msi interrupts when we initialize a pci deviceEric W. Biederman2012-01-251-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a776c491ca5e38c26d9f66923ff574d041e747f4 upstream. I traced a nasty kexec on panic boot failure to the fact that we had screaming msi interrupts and we were not disabling the msi messages at kernel startup. The booting kernel had not enabled those interupts so was not prepared to handle them. I can see no reason why we would ever want to leave the msi interrupts enabled at boot if something else has enabled those interrupts. The pci spec specifies that msi interrupts should be off by default. Drivers are expected to enable the msi interrupts if they want to use them. Our interrupt handling code reprograms the interrupt handlers at boot and will not be be able to do anything useful with an unexpected interrupt. This patch applies cleanly all of the way back to 2.6.32 where I noticed the problem. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | samsung update 1codeworkx2012-06-021-4/+0
|/
* intel-iommu: fix superpage support in pfn_to_dma_pte()Allen Kay2011-12-211-9/+8
| | | | | | | | | | | | | | | commit 4399c8bf2b9093696fa8160d79712e7346989c46 upstream. If target_level == 0, current code breaks out of the while-loop if SUPERPAGE bit is set. We should also break out if PTE is not present. If we don't do this, KVM calls to iommu_iova_to_phys() will cause pfn_to_dma_pte() to create mapping for 4KiB pages. Signed-off-by: Allen Kay <allen.m.kay@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* intel-iommu: set iommu_superpage on VM domains to lowest common denominatorAllen Kay2011-12-211-5/+7
| | | | | | | | | | | | | | | | commit 8140a95d228efbcd64d84150e794761a32463947 upstream. set dmar->iommu_superpage field to the smallest common denominator of super page sizes supported by all active VT-d engines. Initialize this field in intel_iommu_domain_init() API so intel_iommu_map() API will be able to use iommu_superpage field to determine the appropriate super page size to use. Signed-off-by: Allen Kay <allen.m.kay@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* intel-iommu: fix return value of iommu_unmap() APIAllen Kay2011-12-211-3/+8
| | | | | | | | | | | | | | commit 292827cb164ad00cc7689a21283b1261c0b6daed upstream. iommu_unmap() API expects IOMMU drivers to return the actual page order of the address being unmapped. Previous code was just returning page order passed in from the caller. This patch fixes this problem. Signed-off-by: Allen Kay <allen.m.kay@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDsBjorn Helgaas2011-12-092-4/+4
| | | | | | | | | | | | | | | | | | | commit 4cac2eb158c6da0c761689345c6cc5df788a6292 upstream. Previously we claimed device ID 0x7450, regardless of the vendor, which is clearly wrong. Now we'll claim that device ID only for AMD. I suspect this was just a typo in the original code, but it's possible this change will break shpchp on non-7450 AMD bridges. If so, we'll have to fix them as we find them. Reference: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=638863 Reported-by: Ralf Jung <ralfjung-e@gmx.de> Cc: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* xen-pcifront: Update warning comment to use 'e820_host' option.Konrad Rzeszutek Wilk2011-11-111-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | commit 917e3e65c35459d52f0d0b890aa5df0cad07a051 upstream. With Xen changeset 23428 "libxl: Add 'e820_host' option to config file" the E820 as seen from the host can now be passed into the guest. This means that a PV guest can now: - Use the correct PCI I/O gap. Before these patches, Linux guest would boot up and would tell: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:c0000000) while in actuality the PCI I/O gap should have been: [ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:4c000000) - The PV domain with PCI devices was limited to 3GB. It now can be booted with 4GB, 8GB, or whatever number you want. The PCI devices will now _not_ conflict with System RAM. Meaning the drivers can load. CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: linux-pci@vger.kernel.org [v2: Made the string less broken up. Suggested by Joe Perches] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823Josh Boyer2011-11-111-14/+14
| | | | | | | | | | | | | | | | | | | | | | commit 3e309cdf07c930f29a4e0f233e47d399bea34c68 upstream. Commit 15bed0f2f added a quirk for the e823 Ricoh card reader to lower the base frequency. However, the quirk first checks to see if the proprietary MMC controller is disabled, and returns if so. On some devices, such as the Lenovo X220, the MMC controller is already disabled by firmware it seems, but the frequency change is still needed so sdhci-pci can talk to the cards. Since the MMC controller is disabled, the frequency fixup was never being run on these machines. This moves the e823 check above the MMC controller check so that it always gets run. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=722509 Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* x86, iommu: Mark DMAR IRQ as non-threadedThomas Gleixner2011-10-031-1/+1
| | | | | | | | | | | | | | commit 477694e71113fd0694b6bb0bcc2d006b8ac62691 upstream. Mark this lowlevel IRQ handler as non-threaded. This prevents a boot crash when "threadirqs" is on the kernel commandline. Also the interrupt handler is handling hardware critical events which should not be delayed into a thread. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: ARI is a PCIe v2 featureChris Wright2011-08-041-1/+6
| | | | | | | | | | | | | | | | | | | commit 864d296cf948aef0fa32b81407541572583f7572 upstream. The function pci_enable_ari() may mistakenly set the downstream port of a v1 PCIe switch in ARI Forwarding mode. This is a PCIe v2 feature, and with an SR-IOV device on that switch port believing the switch above is ARI capable it may attempt to use functions 8-255, translating into invalid (non-zero) device numbers for that bus. This has been seen to cause Completion Timeouts and general misbehaviour including hangs and panics. Acked-by: Don Dutile <ddutile@redhat.com> Tested-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mmc: Added quirks for Ricoh 1180:e823 lower base clock frequencyManoj Iyer2011-08-041-0/+23
| | | | | | | | | | | | | | | | | | | | | commit 15bed0f2fa8e1d7db201692532c210a7823d2d21 upstream. Ricoh 1180:e823 does not recognize certain types of SD/MMC cards, as reported at http://launchpad.net/bugs/773524. Lowering the SD base clock frequency from 200Mhz to 50Mhz fixes this issue. This solution was suggest by Koji Matsumuro, Ricoh Company, Ltd. This change has no negative performance effect on standard SD cards, though it's quite possible that there will be one on UHS-1 cards. Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Tested-by: Daniel Manrique <daniel.manrique@canonical.com> Cc: Koji Matsumuro <matsumur@nts.ricoh.co.jp> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: conditional resource-reallocation through kernel parameter pci=reallocRam Pai2011-07-083-0/+19
| | | | | | | | | | | | | | | Multiple attempts to dynamically reallocate pci resources have unfortunately lead to regressions. Though we continue to fix the regressions and fine tune the dynamic-reallocation behavior, we have not reached a acceptable state yet. This patch provides a interim solution. It disables dynamic reallocation by default, but adds the ability to enable it through pci=realloc kernel command line parameter. Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-06-271-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: queue: bring discard_granularity/alignment into line with SCSI mmc: queue: append partition subname to queue thread name mmc: core: make erase timeout calculation allow for gated clock mmc: block: switch card to User Data Area when removing the block driver mmc: sdio: reset card during power_restore mmc: cb710: fix #ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS mmc: sdhi: DMA slave ID 0 is invalid mmc: tmio: fix regression in TMIO_MMC_WRPROTECT_DISABLE handling mmc: omap_hsmmc: use original sg_len for dma_unmap_sg mmc: omap_hsmmc: fix ocr mask usage mmc: sdio: fix runtime PM path during driver removal mmc: Add PCI fixup quirks for Ricoh 1180:e823 reader mmc: sdhi: fix module unloading mmc: of_mmc_spi: add NO_IRQ define to of_mmc_spi.c mmc: vub300: fix null dereferences in error handling
| * mmc: Add PCI fixup quirks for Ricoh 1180:e823 readerManoj Iyer2011-06-181-0/+2
| | | | | | | | | | | | Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2011-06-242-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI/ACPI: fix type mismatch PCI: fix new kernel-doc warning PCI: Fix warning in drivers/pci/probe.c on sparc64
| * | PCI: fix new kernel-doc warningRandy Dunlap2011-06-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix pci.c kernel-doc warnings: Warning(drivers/pci/pci.c:3292): No description found for parameter 'flags' Warning(drivers/pci/pci.c:3292): Excess function parameter 'change_bridge_flags' description in 'pci_set_vga_state' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI: Fix warning in drivers/pci/probe.c on sparc64David S. Miller2011-05-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IO_SPACE_LIMIT is currently used in two ways: 1) As a way to mask I/O port values read out of PCI base address registers. This value should be 64-bit. 2) As a value which is the upper limit for all I/O "ports" in the system. On sparc64 we store the full 64-bit physical I/O address in the resources. For this reason we define IO_SPACE_LIMIT at a 64-bit "all 1's". This is the right value to use for ioport_resource.end and for the check made in drivers/pcmcia/rsrc_nonstatic.c:adjust_io(). But in driver/pci/probe.c:__pci_read_base() we mask this against a "u32" variable and thus get the following warning: drivers/pci/probe.c: In function ¡__pci_read_base¢: drivers/pci/probe.c:207: warning: large integer implicitly truncated to unsigned type Fix this by using an explicit "u32" cast. I considered changing sparc64 to define a 32-bit "all 1's" like most other systems do, but this wouldn't work because the checks in PCMCIA's rsrc_nonstatic.c would no longer be right since they are testing against fully formed 64-bit resources. As described above, on sparc64 such resources will hold full 64-bit physical I/O addresses, not bus-centric 32-bit ones. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | | PCI / PM: Block races between runtime PM and system sleepRafael J. Wysocki2011-06-211-1/+3
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit e8665002477f0278f84f898145b1f141ba26ee26 (PM: Allow pm_runtime_suspend() to succeed during system suspend) it is possible that a device resumed by the pm_runtime_resume(dev) in pci_pm_prepare() will be suspended immediately from a work item, timer function or otherwise, defeating the very purpose of calling pm_runtime_resume(dev) from there. To prevent that from happening it is necessary to increment the runtime PM usage counter of the device by replacing pm_runtime_resume() with pm_runtime_get_sync(). Moreover, the incremented runtime PM usage counter has to be decremented by the corresponding pci_pm_complete(), via pm_runtime_put_sync(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | Merge branch 'drm-fixes' of ↵Linus Torvalds2011-06-141-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Compare only lower 32 bits of framebuffer map offsets drm/i915: Don't leak in i915_gem_shmem_pread_slow() drm/radeon/kms: do bounds checking for 3D_LOAD_VBPNTR and bump array limit drm/radeon/kms: fix mac g5 quirk x86/uv/x2apic: update for change in pci bridge handling. alpha, drm: Remove obsolete Alpha support in MGA DRM code alpha/drm: Cleanup Alpha support in DRM generic code savage: remove unnecessary if statement drm/radeon: fix GUI idle IH debug statements drm/radeon/kms: check modes against max pixel clock drm: fix fbs in DRM_IOCTL_MODE_GETRESOURCES ioctl
| * | x86/uv/x2apic: update for change in pci bridge handling.Dave Airlie2011-06-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When I added 3448a19da479b6bd1e28e2a2be9fa16c6a6feb39 I forgot about the special uv handling code for this, so this patch fixes it up. Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Ingo Molnar Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2011-06-091-0/+1
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32, leon: bugfix in LEON SMP interrupt init sparc32, sun4m: bugfix in SMP IPI traphandler sparc: Remove unnecessary semicolons Add support for allocating irqs for bootbus devices Do not skip interrupt sources in sun4d interrupt handler and acknowledge interrupts correctly Restructure sun4d_build_device_irq so that timer interrupts can be allocated sparc: PCIC_PCI needs SPARC32 dependency sparc: Do not select GENERIC_HARDIRQS_NO_DEPRECATED sparc32,leon: add GRPCI2 PCI Host driver sparc32,leon: added LEON-common low-level PCI routines sparc32: added CONFIG_PCIC_PCI Kconfig setting
| * | sparc32,leon: added LEON-common low-level PCI routinesDaniel Hellstrom2011-06-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The LEON architecture does not have a BIOS or bootloader that initializes PCI for us, instead Linux generic PCI layer is used to set up resources and IRQ. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | PM / Intel IOMMU: Fix init_iommu_pm_ops() for CONFIG_PM unsetRafael J. Wysocki2011-06-071-1/+1
|/ / | | | | | | | | | | | | | | | | | | If CONFIG_PM is not set, init_iommu_pm_ops() introduced by commit 134fac3f457f3dd753ecdb25e6da3e5f6629f696 (PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev) is not defined appropriately. Fix this issue. Reported-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* | Merge git://git.infradead.org/iommu-2.6Linus Torvalds2011-06-023-47/+212
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/iommu-2.6: intel-iommu: Fix off-by-one in RMRR setup intel-iommu: Add domain check in domain_remove_one_dev_info intel-iommu: Remove Host Bridge devices from identity mapping intel-iommu: Use coherent DMA mask when requested intel-iommu: Dont cache iova above 32bit intel-iommu: Speed up processing of the identity_mapping function intel-iommu: Check for identity mapping candidate using system dma mask intel-iommu: Only unlink device domains from iommu intel-iommu: Enable super page (2MiB, 1GiB, etc.) support intel-iommu: Flush unmaps at domain_exit intel-iommu: Remove obsolete comment from detect_intel_iommu intel-iommu: fix VT-d PMR disable for TXT on S3 resume
| * intel-iommu: Fix off-by-one in RMRR setupDavid Woodhouse2011-06-011-2/+2
| | | | | | | | | | | | | | | | We were mapping an extra byte (and hence usually an extra page): iommu_prepare_identity_map() expects to be given an 'end' argument which is the last byte to be mapped; not the first byte *not* to be mapped. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * intel-iommu: Add domain check in domain_remove_one_dev_infoMike Habeck2011-06-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The comment in domain_remove_one_dev_info() states "No need to compare PCI domain; it has to be the same". But for the si_domain that isn't going to be true, as it consists of all the PCI devices that are identity mapped thus multiple PCI domains can be in si_domain. The code needs to validate the PCI domain too. Signed-off-by: Mike Habeck <habeck@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * intel-iommu: Remove Host Bridge devices from identity mappingMike Travis2011-06-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | When using the 1:1 (identity) PCI DMA remapping, PCI Host Bridge devices that do not use the IOMMU causes a kernel panic. Fix that by not inserting those devices into the si_domain. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Mike Habeck <habeck@sgi.com> Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * intel-iommu: Use coherent DMA mask when requestedMike Travis2011-06-011-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | The __intel_map_single function is not honoring the passed in DMA mask. This results in not using the coherent DMA mask when called from intel_alloc_coherent(). Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Reviewed-by: Mike Habeck <habeck@sgi.com> Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.1 at 2024-05-03 12:37:25 +0000