aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* usb: gadget: renesas_usbhs: add mod_host supportKuninori Morimoto2011-10-131-0/+13
| | | | | | | | This is mod_host prototype support for renesas_usbhs driver. It doesn't support USB-Hub, and USB-DMAC for now. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb/host: introduce USB_ARCH_HAS_XHCIFelipe Balbi2011-09-261-1/+1
| | | | | | | | | | | | | to make it look like OHCI and EHCI, we introduce that symbol and USB_XHCI_HCD depend on that instead of PCI. [bigeasy@linutronix.de: wire up USB_ARCH_HAS_HCD] Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB host i.MX21: remove dependency on MACH_MX21Sascha Hauer2011-08-241-3/+3
| | | | | | | | | the MACH_MX* macros are scheduled for removal, so just depend on ARCH_MXC instead. The Kconfig text makes it clear on which SoC the driver runs on. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: pxa168: Add onchip USB host controller supportTanmay Upadhyay2011-08-221-0/+7
| | | | | | | | | | - Add EHCI Host controller driver - Add wrapper that creates resources for host controller driver v2 - Call clk_put() after clk_disable() in probe function Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: UHCI: Support big endian GRUSBHC HCJan Andersson2011-05-191-2/+4
| | | | | | | | | | | | | This patch adds support for big endian GRUSBHC UHCI controllers. The HCD bus glue will probe the register interface to determine the endianness of the controller. Tested on GR-LEON4-ITX board which has a controller with little endian interface and on custom LEON3 board with a BE controller. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: UHCI: Add support for big endian descriptorsJan Andersson2011-05-191-0/+4
| | | | | | | | | | | | | | | This patch adds support for universal host controllers that use big endian descriptors. Support for BE descriptors requires a non-PCI host controller. For kernels with PCI-only UHCI there should be no change in behaviour. This patch tries to replicate the technique used to support BE descriptors in the EHCI HCD. Parts added to uhci-hcd.h are basically copy'n'paste from ehci.h. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: UHCI: Add support for big endian mmioJan Andersson2011-05-191-0/+4
| | | | | | | | | | | | | | | | This patch adds support for big endian mmio to the UHCI HCD. Big endian mmio is supported by adding a flag bit to the UHCI HCD replicating the solution used in the EHCI HCD. When adding big endian support this patch also adds a check to see if we need to support HCs with PCI I/O registers when we support HCs with MMIO. This patch also adds 'const' to the register access functions' uhci_hcd argument. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: UHCI: Add support for GRLIB GRUSBHC controllerJan Andersson2011-05-061-2/+4
| | | | | | | | | | | | | | | | This patch adds support for the UHCI part of the GRLIB GRUSBHC controller found on some LEON/GRLIB SoCs. The UHCI HCD previously only supported controllers connected over PCI. This patch adds support for the first non-PCI UHCI HC. I have tried to replicate the solution used in ehci-hcd.c. Tested on GR-LEON4-ITX board (LEON4/GRLIB with GRUSBHC) and x86 with Intel UHCI HC. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: UHCI: Support non-PCI host controllersJan Andersson2011-05-061-0/+4
| | | | | | | | | | | | | | | | | | | | | This patch is part of a series that extend the UHCI HCD to support non-PCI host controllers. This patch also extends the uhci_{read,write}* functions to allow accesses to registers not mapped into PCI I/O space. This extension also includes the addition of a void __iomem pointer to the uhci structure. A new Kconfig option is added to signal that the system has a non-PCI HC. If this Kconfig option is set, uhci-hcd.c will include generic reset functions for systems that do not make use of keyboard and mouse legacy support. PCI controllers will still always use the reset functions from pci-quirks This patch is followed by a patch that adds bus glue for the first non-PCI UHCI HC. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: Add bus glue for GRLIB GRUSBHC controllerJan Andersson2011-05-031-2/+2
| | | | | | | | | | | | | This patch adds support for the GRLIB GRUSBHC EHCI controller from Aeroflex Gaisler. The controller is typically found on LEON/GRLIB SoCs. Tested on GR-LEON4-ITX with with little endian interface and on LEON3 system on GR-PCI-XC5V development board for big endian controller. Signed-off-by: Jan Andersson <jan@gaisler.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci: add bus glue for the Atheros AR71XX/AR7240 SoCsGabor Juhos2011-04-131-0/+8
| | | | | | | | | | | The Atheros AR71XX/AR7240 SoCs have a built-in OHCI controller. This patch adds the necessary glue code to make the generic OHCI driver usable for them. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ehci: add bus glue for the Atheros AR71XX/AR724X/AR91XX SoCsGabor Juhos2011-04-131-0/+9
| | | | | | | | | | | The Atheros AR71XX/AR91XX SoCs have a built-in EHCI controller. This patch adds the necessary glue code to make the generic EHCI driver usable for them. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add initial S5P EHCI driverJoonyoung Shim2011-04-131-0/+6
| | | | | | | | | | This patch adds host USB high speed driver for samsung S5P series. This is initial driver and we need additional implementation to support some functions like power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: sl811: add Kconfig option for ISOCHRONOUS modeMike Frysinger2011-04-131-0/+10
| | | | | | | | | Some bluetooth dongles want ISO mode, and the limited support that the sl811 offers today is sufficient. So add a Kconfig option for people to optionally get access to the partial functionality. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* usb: host: Add EHCI driver for NVIDIA Tegra SoCsBenoit Goby2011-03-111-0/+8
| | | | | | | | | | | | | | | The Tegra 2 SoC has 3 EHCI compatible USB controllers. This patch adds the necessary glue to allow the ehci-hcd driver to work on Tegra 2 SoCs. The platform data is used to configure board-specific phy settings and to configure the operating mode, as one of the ports may be used as a otg port. For additional power saving, the driver supports powering down the phy on bus suspend when it is used, for example, to connect an internal device that use an out-of-band remote wakeup mechanism (e.g. a gpio). Signed-off-by: Benoit Goby <benoit@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Rename "msm72k_otg.c" to "msm_otg.c"Pavankumar Kondeti2011-03-071-1/+1
| | | | | | | | This driver is used across all MSM SoCs. Hence give a generic name. All Functions and strutures are also using "msm_otg" as prefix. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: EHCI, OHCI: Add configuration for the SH USB controllerYoshihiro Shimoda2011-03-011-0/+14
| | | | | | | | | | The SH EHCI/OHCI driver hardcoded the CPU type in {ehci,ohci}-hcd.c. So if we will add the new CPU, we had to add to the hcd driver each time. The patch adds the CONFIG_USB_{EHCI,OHCI}_SH configuration. So if we want to use the SH EHCI/OHCI, we only enable the configuration. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI bus glue for on-chip PMC MSP USB controllerAnoop2011-02-251-2/+13
| | | | | | | This patch add bus glue for USB controller commonly found in PMC-Sierra MSP71xx family of SoC's. Signed-off-by: Anoop P A <anoop.pa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix trout build failure with ci13xxx_msm gadgetPavankumar Kondeti2011-02-041-0/+2
| | | | | | | | | | | | | | | | | | | | This patch fixes the below compilation errors. CC drivers/usb/gadget/ci13xxx_msm.o CC net/mac80211/led.o drivers/usb/gadget/ci13xxx_msm.c: In function 'ci13xxx_msm_notify_event': drivers/usb/gadget/ci13xxx_msm.c:42: error: 'USB_AHBBURST' undeclared (first use in this function) drivers/usb/gadget/ci13xxx_msm.c:42: error: (Each undeclared identifier is reported only once drivers/usb/gadget/ci13xxx_msm.c:42: error: for each function it appears in.) drivers/usb/gadget/ci13xxx_msm.c:43: error: 'USB_AHBMODE' undeclared (first use in this function) make[4]: *** [drivers/usb/gadget/ci13xxx_msm.o] Error 1 make[3]: *** [drivers/usb/gadget] Error 2 MSM USB driver is not supported on boards like trout (MSM7201) which has an external PHY. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'usb-next' of ↵Linus Torvalds2011-01-071-0/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c
| * Merge branch 'usb-next' into musb-mergeGreg Kroah-Hartman2010-12-161-0/+19
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * usb-next: (132 commits) USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added usb: gadget: f_ncm.c added usb: gadget: u_ether: prepare for NCM usb: pch_udc: Fix setup transfers with data out usb: pch_udc: Fix compile error, warnings and checkpatch warnings usb: add ab8500 usb transceiver driver USB: gadget: Implement runtime PM for MSM bus glue driver USB: gadget: Implement runtime PM for ci13xxx gadget USB: gadget: Add USB controller driver for MSM SoC USB: gadget: Introduce ci13xxx_udc_driver struct USB: gadget: Initialize ci13xxx gadget device's coherent DMA mask USB: gadget: Fix "scheduling while atomic" bugs in ci13xxx_udc USB: gadget: Separate out PCI bus code from ci13xxx_udc ...
| | * USB: EHCI: msm: Add support for power managementPavankumar Kondeti2010-12-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable runtime PM and mark no_callbacks flag. OTG device, parent of HCD takes care of putting hardware into low power mode. Adjust port power wakeup flags during system suspend and resume. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * USB: EHCI: Add MSM Host Controller driverPavankumar Kondeti2010-12-101-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for EHCI compliant HSUSB Host controller found on MSM chips. The root hub has a single port and TT is built into it. This driver depends on OTG driver for PHY initialization, clock management and powering up VBUS. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * usb: ehci: introduce CONFIG_USB_EHCI_HCD_OMAPKeshava Munegowda2010-12-011-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce the CONFIG_USB_EHCI_HCD_OMAP option to select EHCI support on OMAP3 and later chips. This scales better than having a long line of dependencies for each new OMAP with EHCI support. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
* | | USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCsMac Lin2010-11-291-0/+15
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CNS3XXX SOC has include USB EHCI and OHCI compatible controllers. This patch adds the necessary glue logic to allow ehci-hcd and ohci-hcd drivers to work on CNS3XXX The EHCI and OHCI controllers share a common clock control and reset bit, therefore additional check for the timming of enabling and disabling is required. The USB bit of PLL Power Down Control is also shared by OTG, 24MHzUART clock, Crypto clock, PCIe reference clock, and Clock Scale Generator. Therefore we only ensure it is enabled, while not disabling it. Signed-off-by: Mac Lin <mkl0301@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* | USB: Fix FSL USB driver on non Open Firmware systemsMarc Kleine-Budde2010-11-111-1/+1
|/ | | | | | | | | | | | | | | | Commit 126512e3f274802ca65ebeca8660237f0361ad48 added support for FSL's USB controller on powerpc. In this commit the Open Firmware code was selected and compiled unconditionally. This breaks on ARM systems from FSL which use the same driver (.i.e. the i.MX series), because ARM don't have OF support (yet). This patch fixes the problem by only selecting the OF code on systems with Open Firmware support. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Compile-Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add EHCI and OHCH glue for OCTEON II SOCs.David Daney2010-10-291-2/+28
| | | | | | | | | | | | | | | | | | | | | | | | | The OCTEON II SOC has USB EHCI and OHCI controllers connected directly to the internal I/O bus. This patch adds the necessary 'glue' logic to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II. The OCTEON normally runs big-endian, and the ehci/ohci internal registers have host endianness, so we need to select USB_EHCI_BIG_ENDIAN_MMIO. The ehci and ohci blocks share a common clocking and PHY infrastructure. Initialization of the host controller and PHY clocks is common between the two and is factored out into the octeon2-common.c file. Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in arch/mips/Kconfig in a following patch. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-usb@vger.kernel.org To: dbrownell@users.sourceforge.net Patchwork: http://patchwork.linux-mips.org/patch/1675/ Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* USB: add USB EHCI support for MPC5121 SoCAnatolij Gustschin2010-10-221-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | Extends FSL EHCI platform driver glue layer to support MPC5121 USB controllers. MPC5121 Rev 2.0 silicon EHCI registers are in big endian format. The appropriate flags are set using the information in the platform data structure. MPC83xx system interface registers are not available on MPC512x, so the access to these registers is isolated in MPC512x case. Furthermore the USB controller clocks must be enabled before 512x register accesses which is done by providing platform specific init callback. The MPC512x internal USB PHY doesn't provide supply voltage. For boards using different power switches allow specifying DRVVBUS and PWR_FAULT signal polarity of the MPC5121 internal PHY using "fsl,invert-drvvbus" and "fsl,invert-pwr-fault" properties in the device tree USB nodes. Adds documentation for this new device tree bindings. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add platform glue driver for FSL USB DR controllerAnatolij Gustschin2010-10-221-0/+4
| | | | | | | | | | | | | | | | | | | Replace FSL USB platform code by simple platform driver for creation of FSL USB platform devices. The driver creates platform devices based on the information from USB nodes in the flat device tree. This is the replacement for old arch fsl_soc usb code removed by this patch. The driver uses usual of-style binding, available EHCI-HCD and UDC drivers can be bound to the created devices. The new of-style driver additionaly instantiates USB OTG platform device, as the appropriate USB OTG driver will be added soon. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: make CONFIG_USB_EHCI_TT_NEWSCHED default to YAlan Stern2010-08-101-4/+7
| | | | | | | | | | | | | | | | | | | This patch (as1382) changes the USB_EHCI_TT_NEWSCHED Kconfig option to be non-experimental and to default to Y. This option has existed for a long time, and I have not heard any complaints concerning it. By contrast, several people have reported that their devices could be made to work only by enabling the option. The point of changing the default is to cause the option to be enabled by distros that simply use the default settings for esoteric things like this. This change was motivated by Bugzilla #15649. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci: Add Kconfig entries for ohci-omap3Anand Gadiyar2010-05-201-0/+15
| | | | | | | | | | | | | | | | | On OMAP systems, we have two different OHCI controllers. The legacy one is present in OMAP1/2 chips, and the newer one comes bundled as a companion to the EHCI controller on OMAP3 and newer chips. We may have multi-omap configurations where OMAP2 and OMAP3 support may be enabled in the same kernel, and need a mechanism to keep both drivers around. This patch adds a Kconfig entry for each of these drivers. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: MXC: Add i.MX21 specific USB host controller driver.Martin Fuzzey2010-03-021-0/+11
| | | | | | | | | This driver is a Full / Low speed only USB host for the i.MX21. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add EHCI support for MX27 and MX31 based boardsDaniel Mack2009-12-111-0/+7
| | | | | | | | | | | | | | | | | The Freescale MX27 and MX31 SoCs have a EHCI controller onboard. The controller is capable of USB on the go. This patch adds a driver to support all three of them. Users have to pass details about serial interface configuration in the platform data. The USB OTG core used here is the ARC core, so the driver should be renamed and probably be merged with ehci-fsl.c eventually. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add support for Xilinx USB host controllerJulie Zhu2009-12-111-2/+13
| | | | | | | | | | | | | | | Add bus glue driver for Xilinx USB host controller. The controller can be configured as HS only or HS/FS hybrid. The driver uses the device tree file to configure the driver according to the setting in the hardware system. This driver has been tested with usbtest using the NET2280 PCI card. Signed-off-by: Julie Zhu <julie.zhu@xilinx.com> Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: NXP ISP1362 USB host driverLothar Wassmann2009-09-231-0/+12
| | | | | | | | | Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add nuvoton Ehci driver for w90p910 platformWan ZongShun2009-09-231-0/+6
| | | | | | | | | Add ehci support for w90p910 platform. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: r8a66597-hcd platform data on_chip supportMagnus Damm2009-07-201-7/+0
| | | | | | | | | | | | | | | | Convert the r8a66597-hcd driver to use the on_chip flag from platform data to enable on chip behaviour instead of relying on CONFIG_SUPERH_ON_CHIP_R8A66597 ugliness. This makes the code cleaner and also allows us to support both external and internal r8a66597 with the same kernel. It also makes the Kconfig part more future proof since we with this patch can add support for new processors with on-chip r8a66597 without modifying the Kconfig. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* USB: buildfix ppc randconfigArnd Bergmann2009-07-121-14/+15
| | | | | | | | | | | | | | We could just make the USB_OHCI_HCD_PPC_OF option implicit and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE and USB_OHCI_HCD_PPC_OF_LE are set. [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Subrata Modak <subrata@linux.vnet.ibm.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: allow sh7724 to enable on-chip r8a66597Magnus Damm2009-07-051-2/+2
| | | | | | | | The sh7724 processor has two on-chip r8a66597 blocks, so add it to the list of processors for SUPERH_ON_CHIP_R8A66597. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* USB: xhci depends on PCI.Paul Mundt2009-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While it looks like xhci was written with both PCI and non-PCI in mind, apparently only the former has seen any testing. xhci-mem.o can be "fixed" with a linux/dmapool.h include, but there are still parts of the code that make use of struct pci_dev directly. So, at least more work is needed before this can be turned on for non-PCI builds: CC drivers/usb/host/xhci-mem.o drivers/usb/host/xhci-mem.c: In function 'xhci_segment_alloc': drivers/usb/host/xhci-mem.c:45: error: implicit declaration of function 'dma_pool_alloc' drivers/usb/host/xhci-mem.c:45: warning: assignment makes pointer from integer without a cast drivers/usb/host/xhci-mem.c: In function 'xhci_segment_free': drivers/usb/host/xhci-mem.c:67: error: implicit declaration of function 'dma_pool_free' drivers/usb/host/xhci-mem.c: In function 'xhci_alloc_virt_device': drivers/usb/host/xhci-mem.c:239: warning: assignment makes pointer from integer without a cast drivers/usb/host/xhci-mem.c:248: warning: assignment makes pointer from integer without a cast drivers/usb/host/xhci-mem.c: In function 'xhci_mem_cleanup': drivers/usb/host/xhci-mem.c:578: error: implicit declaration of function 'dma_pool_destroy' drivers/usb/host/xhci-mem.c: In function 'xhci_mem_init': drivers/usb/host/xhci-mem.c:657: error: implicit declaration of function 'dma_pool_create' drivers/usb/host/xhci-mem.c:658: warning: assignment makes pointer from integer without a cast drivers/usb/host/xhci-mem.c:663: warning: assignment makes pointer from integer without a cast make[3]: *** [drivers/usb/host/xhci-mem.o] Error 1 CC drivers/usb/host/xhci-pci.o drivers/usb/host/xhci-pci.c: In function 'xhci_pci_reinit': drivers/usb/host/xhci-pci.c:39: error: implicit declaration of function 'pci_set_mwi' drivers/usb/host/xhci-pci.c: At top level: drivers/usb/host/xhci-pci.c:151: error: 'usb_hcd_pci_probe' undeclared here (not in a function) drivers/usb/host/xhci-pci.c:152: error: 'usb_hcd_pci_remove' undeclared here (not in a function) drivers/usb/host/xhci-pci.c:155: error: 'usb_hcd_pci_shutdown' undeclared here (not in a function) drivers/usb/host/xhci-pci.c:159: warning: function declaration isn't a prototype drivers/usb/host/xhci-pci.c:164: warning: function declaration isn't a prototype make[3]: *** [drivers/usb/host/xhci-pci.o] Error 1 Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: xhci: Add Makefile, MAINTAINERS, and Kconfig entries.Sarah Sharp2009-06-151-0/+20
| | | | | | | | | Add Makefile and Kconfig entries for the xHCI host controller driver. List Sarah Sharp as the maintainer for the xHCI driver. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add platform device support for the ISP1760 USB chipCatalin Marinas2009-03-241-1/+1
| | | | | | | | | | | | | | Currently, the driver only supports PCI and PPC_OF but there are boards like ARM RealView where this is a platform device. The patch adds the necessary functions and registration to the isp1760-if.c file and modifies the corresponding Makefile and Kconfig to be able to use this driver even if PCI and PPC_OF are not enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: kill prehistorical comments about USB_EHCI_HCDThierry Vignaud2009-03-241-4/+1
| | | | | | | | | | Remove old comments about USB_EHCI_HCD. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Driver for Freescale QUICC Engine USB Host ControllerAnton Vorontsov2009-01-271-0/+17
| | | | | | | | | | | | | | | | | | This patch adds support for the FHCI USB controller, as found in the Freescale MPC836x and MPC832x processors. It can support Full or Low speed modes. Quite a lot the hardware is doing by itself (SOF generation, CRC generation and checking), though scheduling and retransmission is on software's shoulders. This controller does not integrate the root hub, so this driver also fakes one-port hub. External hub is required to support more than one device. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: omap1 ohci buildfix (otg related)David Brownell2009-01-271-0/+1
| | | | | | | | | | | | | | > > drivers/built-in.o: In function `ohci_omap_init': > > hid-quirks.c:(.text+0x6c608): undefined reference to `otg_get_transceiver' > > drivers/built-in.o: In function `omap_udc_probe': > > hid-quirks.c:(.init.text+0x34c0): undefined reference to `otg_get_transceiver' > > hid-quirks.c:(.init.text+0x3d40): undefined reference to `otg_put_transceiver' Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb host: Oxford OXU210HP HCD driver.Rodolfo Giometti2009-01-071-0/+13
| | | | | | | | | | This driver implements the support for Oxford OXU210HP USB high-speed host, no peripheral nor OTG. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: Kan Liu <kan.k.liu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove optional bus bindings in isp1760, fixing runtime warningSebastian Andrzej Siewior2008-11-131-17/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Roland Reported the following: | kmem_cache_create: duplicate cache isp1760_qtd | Pid: 461, comm: modprobe Tainted: G W 2.6.28-rc2-git3-default #4 | Call Trace: | [<c017540e>] kmem_cache_create+0xc9/0x3a3 | [<c0159a8d>] free_pages_bulk+0x16c/0x1c9 | [<f165c05f>] isp1760_init+0x0/0xb [isp1760] | [<f165c018>] init_kmem_once+0x18/0x5f [isp1760] | [<f165c064>] isp1760_init+0x5/0xb [isp1760] | [<c010113d>] _stext+0x4d/0x148 | [<c0142936>] load_module+0x12cd/0x142e | [<c01743c4>] kmem_cache_destroy+0x0/0xd7 | [<c0142b1e>] sys_init_module+0x87/0x176 | [<c01039eb>] sysenter_do_call+0x12/0x2f The reason, is that ret is initialized with ENODEV instead of 0 _or_ the kmem cache is not freed in error case with no bus binding. The difference between OF+PCI and OF only is | 15148 804 32 15984 3e70 isp1760-of-pci.o | 13748 676 8 14432 3860 isp1760-of.o about 1.5 KiB. Until there is a checkbox where the user *must* select atleast one item, and may select multiple entries I don't make it selectable anymore. Having a driver which can't be used under any circumstances is broken anyway and I've seen distros shipping it that way. Reported-by: Roland Kletzing <devzero@web.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>a Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds2008-10-231-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: don't rebind drivers after failed resume or reset USB: fix memory leak in cdc-acm USB: Unusual dev for Mio moov 330 gps USB: cdc-wdm: make module autoload work USB: Fix unneeded endpoint check in pxa27x_udc usb/gadget: fix kernel-doc warning USB: Speedtouch: add pre_reset and post_reset routines USB: usbtest.c: length, sglen and vary are unsigned, so cannot be negative USB: support Huawei data card product IDs USB: add ZTE MF626 USB GSM modem entry USB: storage: Avoid I/O errors when issuing SCSI ioctls to JMicron USB/ATA bridge USB: Fix debugfs_create_file's error checking method for usb/gadget/s3c2410_udc USB: ohci: add support for tmio-ohci cell
| * USB: ohci: add support for tmio-ohci cellDmitry Baryshkov2008-10-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Some Toshiba Mobile I/O chips have OHCI controller built in. E.g. the tc6393xb chip found in several Toshiba e-Series PDAs and in Sharp Zaurus SL-6000 PDA. This adds platform glue to support OHCI function of the chip. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Ian Molton <spyro@f2s.com> Cc: Ian Molton <spyro@f2s.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.1 at 2024-05-19 07:04:04 +0000