aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* 2.6.25-rc4 de_stop_rxtx polling wrongGrant Grundler2008-03-171-3/+7
| | | | | | | | | | | | | | | This untested patch _should_ fix: "(net de2104x) Kernel panic with de2104x tulip driver on boot" http://bugzilla.kernel.org/show_bug.cgi?id=3156 But the bug submitter isn't responding. Same fix has been applied to tulip.c (several years ago) and uli526x.c (Feb 2008) drivers. [ The panic reported in the bug report was removed in a recently (march 2008) accepted patch from Ondrej Zary. ] Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* forcedeth: limit tx to 16Ayaz Abdulla2008-03-171-18/+100
| | | | | | | | | | | | This is a critical patch which adds a workaround for a HW bug. The patch will limit the number of outstanding tx packets to 16. Otherwise, the HW could send out packets with bad checksums. The driver will still setup the tx packets into the ring, however, will only set the Valid bit on 16 packets at a time. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* 3c501: Further coding style fixesAlan Cox2008-03-171-7/+9
| | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* cxgb3: Fix transmit queue stop mechanismDivy Le Ray2008-03-171-3/+9
| | | | | | | | | | | | | | | | | | | | | | The last change in the Tx queue stop mechanism opens a window where the Tx queue might be stopped after pending credits returned. Tx credits are returned via a control message generated by the HW. It returns tx credits on demand, triggered by a completion bit set in selective transmit packet headers. The current code can lead to the Tx queue stopped with all pending credits returned, and the current frame not triggering a credit return. The Tx queue will then never be awaken. The driver could alternatively request a completion for packets that stop the queue. It's however safer at this point to go back to the pre-existing behaviour. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NEWEMAC: Add compatible "ibm,tah" to tah matching tableStefan Roese2008-03-171-0/+4
| | | | | | | | | Add "ibm,tah" to the compatible matching table of the ibm_newemac tah driver. The type "tah" is still preserved for compatibility reasons. New dts files should use the compatible property though. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* rndis_host: fix transfer size negotiationJean-Christophe Dubois2008-03-171-4/+8
| | | | | | | | | | | | | This patch should resolve a problem that's troubled support for some RNDIS peripherals. It seems to have boiled down to using a variable to establish transfer size limits before it was assigned, which caused those devices to fallback to a default "jumbogram" mode we don't support. Fix by assigning it earlier for RNDIS. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> [ cleanups ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NEWEMAC: fix support for pause packetsPravin M. Bathija2008-03-171-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem Description and Fix --------------------------- When a pause packet(with destination as reserved Multicast address) is received by the EMAC hardware to control the flow of frames being transmitted by it, it is dropped by the hardware unless the reserved Multicast address is hashed in to the GAHT[1-4] registers. This code fix adds the default reserved multicast address to the GAHT[1-4] registers in the EMAC(s) present on the chip. The flow control with Pause packets will only work if the following register bits are programmed in EMAC: EMACx_MR1[APP] = 1 EMACx_RMR[BAE] = 1 EMACx_RMR[MAE] = 1 Behavior that may be observed in a running system ------------------------------------------------- A host transferring data from a PPC based system may send a Pause packet to the PPC EMAC requesting it to slow down the flow of packets. If the default reserved multicast MAC address is not programmed into the GAHT[1-4] registers this Pause packet will be dropped by PPC EMAC and no Flow Control will be done. Signed-off-by: Pravin M. Bathija <pbathija@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* drivers/net/atl1/atl1_main.c: remove unused variableJulia Lawall2008-03-171-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The variable update_rx is initialized but never used otherwise. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; identifier i; constant C; @@ ( extern T i; | - T i; <+... when != i - i = C; ...+> ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* drivers/net/ipg.c: remove unused variableJulia Lawall2008-03-171-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | The variable gig is initialized but never used otherwise. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; identifier i; constant C; @@ ( extern T i; | - T i; <+... when != i - i = C; ...+> ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* epic100 endianness annotations and fixesAl Viro2008-03-171-20/+27
| | | | | | | | | * "powerpc or sparc" is not the same as "big-endian", fix the ifdef * since we tell the card to byteswap the descriptors on big-endian, we ought to leave them host-endian... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ipg fixAl Viro2008-03-171-1/+6
| | | | | | | spurious cpu_to_le64() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* more misannotations: ne2k-pciAl Viro2008-03-171-4/+4
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* fore2000 - fix misannotationsAl Viro2008-03-172-108/+108
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* wan/farsync: copy_from_user() to iomem is wrongAl Viro2008-03-171-5/+12
| | | | | | | kmalloc intermediate buffer(), do copy_from_user() + memcpy_toio() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* r6040 endianness fixesAl Viro2008-03-171-4/+6
| | | | | | | pci_unmap_single() on little-endian address Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* rt2x00: Add new D-Link USB IDIvo van Doorn2008-03-111-0/+1
| | | | | Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: never disable multicast because it disables broadcast tooAdam Baker2008-03-112-4/+4
| | | | | | | | | | On rt73 and rt61 disabling reception of multicast packets also disables broadcast traffic which we never want to do. Therefore we should never disable multicast. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: fix the 'compare command with itself' properlySebastian Siewior2008-03-111-1/+1
| | | | | | | | | |libertas: Invalid CMD_RESP 8012 to command 50! The special case got mixed up in 8a96df80b3. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* drivers/net/Kconfig: fix whitespace for GELIC_WIRELESS entryJohn W. Linville2008-03-111-9/+9
| | | | Signed-off-by: John W. Linville <linville@tuxdriver.com>
* net/enc28j60: oops fixDavid Brownell2008-03-051-1/+2
| | | | | | | | | Prevent oops on enc28j60 packet RX: make sure buffers are aligned. Not all architectures support unaligned accesses in kernel space. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/ac3200.c: replace init_module&cleanup_module with ↵Jon Schindler2008-03-051-3/+4
| | | | | | | | | | | module_init&module_exit Replace init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/apne.c: replace init_module&cleanup_module with ↵Jon Schindler2008-03-051-3/+4
| | | | | | | | | | | module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/arcnet/capmode.c: replace init_module&cleanup_module with ↵Jon Schindler2008-03-051-2/+4
| | | | | | | | | | | module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/appletalk/ltpc.c: replace init_module&cleanup_module with ↵Jon Schindler2008-03-051-1/+2
| | | | | | | | | | | module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* bluetooth: CONWISE Technology based adapters with buggy SCO support ↵SDiZ2008-03-051-0/+3
| | | | | | | | | | | | | (bugzilla #9027) From: SDiZ <sdiz@sdiz.net> Fix the CONWISE Technology based adapters with buggy SCO support issue (bugzilla #9027) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PPPOL2TP]: Fix SMP issues in skb reorder queue handlingJames Chapman2008-03-051-3/+8
| | | | | | | | | | | | | | | When walking a session's packet reorder queue, use skb_queue_walk_safe() since the list could be modified inside the loop. Rearrange the unlinking skbs from the reorder queue such that it is done while the queue lock is held in pppol2tp_recv_dequeue() when walking the skb list. A version of this patch was suggested by Jarek Poplawski. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PPPOL2TP]: Make locking calls softirq-safeJames Chapman2008-03-051-29/+29
| | | | | | | | | | | | | | | | Fix locking issues in the pppol2tp driver which can cause a kernel crash on SMP boxes. There were two problems:- 1. The driver was violating read_lock() and write_lock() scheduling rules because it wasn't using softirq-safe locks in softirq contexts. So we now consistently use the _bh variants of the lock functions. 2. The driver was calling sk_dst_get() in pppol2tp_xmit() which was taking sk_dst_lock in softirq context. We now call __sk_dst_get(). Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-03-053-10/+10
| | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn: replace __inline with inlineHarvey Harrison2008-03-052-3/+3
| | | | | | Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: replace __inline with inlineHarvey Harrison2008-03-051-1/+1
| | | | | | Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* make s2io.c:init_tti() staticAdrian Bunk2008-03-051-1/+1
| | | | | | | | | Make the needlessly global init_tti() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: "Ramkrishna Vepa" <Ramkrishna.Vepa@neterion.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* FIXED_PHY must depend on PHYLIB=yAdrian Bunk2008-03-051-0/+1
| | | | | | | | | | | | | | | | | | This patch fixes the following build error introduced by commit a79d8e93d300adb84cccc38ac396cfb118c238ad and reported by Olaf Hering: <-- snip --> ... LD .tmp_vmlinux1 arch/powerpc/sysdev/built-in.o: In function `of_add_fixed_phys': fsl_soc.c:(.init.text+0xd34): undefined reference to `fixed_phy_add' make: *** [.tmp_vmlinux1] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* fix drivers/net/atarilance.c compilationAdrian Bunk2008-03-051-3/+2
| | | | | | | | | | | | | | | | | | This patch fixes the following build error: <-- snip --> ... CC [M] drivers/net/atarilance.o {standard input}: Assembler messages: {standard input}:406: Error: symbol `Lberr' is already defined {standard input}:460: Error: symbol `Lberr' is already defined make[3]: *** [drivers/net/atarilance.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ixgbe: fix typo in speed mesageEmil Tantilov2008-03-051-1/+1
| | | | | | Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* e100: Do suspend/shutdown like e1000Auke Kok2008-03-051-26/+3
| | | | | | | | | This fixes a "trying to free already free IRQ" message and simplifies the shutdown/suspend code by re-using already existing code when going to suspend. The code is now symmetric with e100_resume. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ehea: Fix missing Kconfig dependencyThomas Klein2008-03-051-1/+1
| | | | | | | Fixed Kconfig: ehea driver requires sparse mem Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* axnet_cs: change debugging level for "Too much work at interrupt" message.Komuro2008-03-051-1/+1
| | | | | | | This message is frequently displayed even if normal file-transfer. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* mv643xx_eth: Define module alias for platform deviceMartin Michlmayr2008-03-051-0/+1
| | | | | | | | | | The mv643xx_eth driver can be loaded as a platform device, as is done by various Orion (ARM) based devices. The driver needs to define a module alias for the platform driver so udev will load it automatically. Tested with Debian on a QNAP TS-209. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* de2104x: remove BUG_ON() when changing media typeOndrej Zary2008-03-051-1/+2
| | | | | | | | | When the chip dies (probably because of a bug somewhere in the driver), de_stop_rxtx() fails and changing the media type crashes the whole machine. Replace BUG_ON() in de_set_media() with a warning. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* dm9161: add configuration for MII/RMIIfrederic Rodo2008-03-051-3/+14
| | | | | Signed-off-by: Frederic Rodo <f.rodo@til-technologies.fr> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* b43legacy: Fix module init messageMichael Buesch2008-03-041-1/+1
| | | | | | | | This fixes the module init message to tell that the legacy driver loaded. This makes it less confusing, in case both drivers are loaded. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rndis_wlan: fix broken data copyJussi Kivilinna2008-03-041-5/+3
| | | | | | | | | | Replace broken code that attempted to copy 6 byte array to 64-bit integer. Due to missing cast to 64-bit integer, left shift operation were 32-bit and lead to bytes been copied over each other. New code uses simple memcpy, for greater readability and efficiency. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: compare the current command with responseSebastian Siewior2008-03-041-3/+1
| | | | | | | instead of with itself. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: fix sanity check on sequence number in command responseDavid Woodhouse2008-03-041-2/+2
| | | | | | | | | | | Slightly more useful if we compare it against the sequence number of the command we have outstanding, rather than comparing the reply with itself. Doh. Pointed out by Sebastian Siewior Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54: fix eeprom parser length sanity checksJohannes Berg2008-03-041-7/+11
| | | | | | | | | | | When I called p54_parse_eeprom() on a hand-coded structure I managed to make a small mistake with wrap->len which caused a segfault a few lines down when trying to read entry->len. This patch changes the validation code to avoid such problems. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54: fix EEPROM structure endiannessJohannes Berg2008-03-042-5/+5
| | | | | | | | | | | Since the EEPROM structure is read from hardware, it is always little endian, annotate that in the struct and make sure to convert where applicable. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Michael Wu <flamingice@sourmilk.net> Tested-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ssb: Add pcibios_enable_device() return value checkYoichi Yuasa2008-03-041-1/+4
| | | | | | | | This patch has added pcibios_enable_device() return value check. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PPPOL2TP]: Add missing sock_put() in pppol2tp_tunnel_closeall()Jarek Poplawski2008-03-031-1/+6
| | | | | | | | Every skb removed from session->reorder_q needs sock_put(). Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Subject: [PPPOL2TP] add missing sock_put() in pppol2tp_recv_dequeue()Jarek Poplawski2008-03-031-0/+1
| | | | | | | | Every skb removed from session->reorder_q needs sock_put(). Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TUN]: Fix RTNL-locking in tun/tap driverKim B. Heino2008-02-291-1/+5
| | | | | | | | | | | | | | Current tun/tap driver sets also net device's hw address when asked to change character device's hw address. This is a good idea, but it misses RTLN-locking, resulting following error message in 2.6.25-rc3's inetdev_event() function: RTNL: assertion failed at net/ipv4/devinet.c (1050) Attached patch fixes this problem. Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.1 at 2025-02-16 02:24:18 +0000