aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* ibm_new_emac: Nuke SET_MODULE_OWNER() useRoland Dreier2007-10-101-1/+0
| | | | | Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ibm_emac: Convert to use napi_struct independent of struct net_deviceRoland Dreier2007-10-102-32/+18
| | | | | | | | | | | | | | Commit da3dedd9 ("[NET]: Make NAPI polling independent of struct net_device objects.") changed the interface to NAPI polling. Fix up the ibm_emac driver so that it works with this new interface. This is actually a nice cleanup because ibm_emac is one of the drivers that wants to have multiple NAPI structures for a single net_device. Tested with the internal MAC of a PowerPC 440SPe SoC with an AMCC 'Yucca' evaluation board. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* IPoIB: Fix unused variable warningRoland Dreier2007-10-101-1/+0
| | | | | | | | | | The conversion to use netdevice internal stats left an unused variable in ipoib_neigh_free(), since there's no longer any reason to get netdev_priv() in order to increment dropped packets. Delete the unused priv variable. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* natsemi: Use NATSEMI_TIMER_FREQ consistentlyMark Brown2007-10-101-2/+2
| | | | | | | | | | The natsemi driver has a define NATSEMI_TIMER_FREQ which looks like it controls the normal frequency of the chip poll timer but in fact only takes effect for the first run of the timer. Adjust the value of the define to match that used by the timer and use the define consistently. Signed-off-by: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* cxgb3 sparse warning fixesStephen Hemminger2007-10-105-33/+31
| | | | | | | | Fix warnings from sparse related to shadowed variables and routines that should be declared static. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* chelsio: sparse warning fixes (old cxgb2)Stephen Hemminger2007-10-104-370/+3
| | | | | | | | | Fix problems detected by sparse: 1. whole chunk of MAC code was for defined and never used 2. hook for running ext intr in workqueue wasn't being used Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ehea: use kernel event queueJan-Bernd Themann2007-10-103-24/+10
| | | | | | | | eHEA recovery and DLPAR functions are called seldomly. The eHEA workqueues are replaced by the kernel event queue. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* network drivers: sparse warning fixesStephen Hemminger2007-10-107-33/+32
| | | | | | | Fix some of the easy warnings in network device drivers. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* s2io: sparse warnings fix (rev2)Stephen Hemminger2007-10-101-47/+50
| | | | | | | | Fix warnings from sparse checker about shadowed definition and improperly formatted ethtool_strings. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* e1000e: restore flow control settings properlyAuke Kok2007-10-103-3/+11
| | | | | | | | | | | After a cable unplug the forced flow control settings were lost accidentally and the flow control settings fell back to the default EEPROM determined values. This breaks for people who want to run without fc enabled - after a cable reset the driver would refuse to run with fc disabled. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* e1000e: Simple optimizations in e1000_xmit_frameAuke Kok2007-10-101-5/+4
| | | | | | | After an e1000 patch from Krishna Kumar <krkumar2@in.ibm.com>. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* e1000: Simple optimizations in e1000_xmit_frameKrishna Kumar2007-10-101-5/+4
| | | | | | | Some simple optimizations in e1000_xmit_frame. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libertas: let get nick return what set nick has setHolger Schurig2007-10-101-27/+7
| | | | | | | | | | | Make the get-nickname wireless extension actually work. Before this patch, I could do "iwconfig eth1 nick BLAH" but "iwconfig eth1" would have still showed "MRVL-USB8388" to me. Hey, and that was wrong anyway, I'm on a CF card, not on USB :-) Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-By: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] libertas: remove one superfluous includeHolger Schurig2007-10-101-1/+0
| | | | | | | This makes scripts/checkincludes.pl happy. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] libertas: clean up scan debug messagesHolger Schurig2007-10-102-68/+155
| | | | | | | | | | | * make scan debug output cleaner * change some LBS_DEB_ASSOC messages to LBS_DEB_SCAN, which is more correct * move helper functions together * print function return value in the tracing code at one central location Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-By: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] libertas: fix "warning: Using plain integer as NULL pointer" sparse ↵Holger Schurig2007-10-101-1/+1
| | | | | | | | | | warnings This fixes three "warning: Using plain integer as NULL pointer" sparse warnings. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] libertas: fix a debug statementHolger Schurig2007-10-101-1/+1
| | | | | | | Fix a debug statement Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] libertas link error due to gcc `smartness'Geert Uytterhoeven2007-10-101-2/+3
| | | | | | | | | | | | | | | | | | | | Some versions of gcc replace strstr() calls with a single-character `needle' parameter by strchr() behind our back. This causes a link error if strchr() is defined as an inline function in <asm/string.h> (e.g. on m68k): | drivers/built-in.o: In function `libertas_parse_chan': | linux/drivers/net/wireless/libertas/debugfs.c:209: undefined reference to `strchr' | drivers/built-in.o: In function `libertas_parse_ssid': | linux/drivers/net/wireless/libertas/debugfs.c:260: undefined reference to `strchr' Avoid this by explicitly calling strchr() instead. Also include <linux/string.h>, because this file calls lots of str*() routines. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-By: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-By: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] libertas: fix u8 constantHolger Schurig2007-10-102-4/+4
| | | | | | | | | Don't write constants that are (per documentation and struct) u8 as 0x0001, use 0x01 instead. Also remove an useless cast. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-By: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] libertas: problems setting wpa keysDan Williams2007-10-101-5/+30
| | | | | | | | | | | | The 88w8385 chip, using SDIO interface and firmware release 5.0.11p0, has problems when both unicast and multicast WPA keys are set in one command. This patch ensures the keys are set independently. The original author of this patch is Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Release 2.0.10Ivo van Doorn2007-10-101-1/+1
| | | | | | | Version bump Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Allways memset memory obtained from skb_push()Ivo van Doorn2007-10-103-0/+6
| | | | | | | | | When skb_push() is used we should memset the memory before usage. This will prevent bugs which could occur when the data is treated as TX descriptor. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Clean disabling of rt73usb_get_tsfIvo van Doorn2007-10-101-5/+2
| | | | | | | | | | | By defining rt73usb_get_tsf to NULL we only have 1 location that needs to be edited when rt73usb_get_tsf can be enabled again. This also reduces the number of #ifdefs in the code which is also a "good thing" Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Reorganize configuration handlerIvo van Doorn2007-10-109-377/+358
| | | | | | | | | | | | | | | | | | Reorganize configuration handling by creating a extra structure which contains precalculated values based on the mac80211 values which are usefull for all individual drivers. This also fixes the preamble configuration problem, up untill now preamble was never configured since by default the rate->val value was used when changing the mode. Now rate->val will only be used to set the basic rate mask. The preamble configuration will now be done correctly through the erp_ie_changed callback function. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Small optimizationsIvo van Doorn2007-10-103-18/+13
| | | | | | | | Make some small optimizations by removing some simple if-statements. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Pass dev_state to rt2x00lib_toggle_rxIvo van Doorn2007-10-103-10/+9
| | | | | | | | | Directly pass a value from the enum dev_state with rt2x00lib_toggle_rx, this will save us a ? : statement, and it is clearer then passing a 1 0 argument. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Add get_tx_data_len callback functionIvo van Doorn2007-10-104-23/+56
| | | | | | | | | | | The TX datalen must always be converted to a value rt73 and rt2500usb understand. Both require to use a different size then skb->len. First off this is required because the descriptor must be added, but the second is because the value must be a multiple of either 2 or 4, and it should not be a multiple of the USB packetmax Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Cut lines down to 80 charactersIvo van Doorn2007-10-101-1/+2
| | | | | | | | rt61pci contained 1 line of 88 characters width, this needs to be cut down. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: get_duration expects values in 100kbsIvo van Doorn2007-10-103-3/+3
| | | | | | | | get_duration expects all speeds to be passed in 100kbs, this means that passing 2 is incorrect and should be raised to 20 Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Move TSF sync values into rt2x00configIvo van Doorn2007-10-109-51/+45
| | | | | | | | | All drivers use the same values for TSF sync, this will move the value determination into rt2x00config.c, and the definition for the values to rt2x00reg.h Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Fix rfkill handlingIvo van Doorn2007-10-107-19/+18
| | | | | | | | | | | | | | | | | | | | | | As reported by Modestas Vainius, enabling rkfill in 1 driver and disabling it in a second could cause a NULL pointer exception when the rfkill-disabled driver still sets the CONFIG_SUPPORT_HW_BUTTON flag. Furthermore, rfkill expects the timeout as a value in milliseconds instead of jiffies. Also increase the timeout to a second, since this 250ms would be overkill. Also the flag DEVICE_ENABLED_RADIO_HW is causing problems for devices which do not support the hardware button while rfkill is enabled in the driver. To remidy this we should inverse the flag and its meaning, rename the flag to DEVICE_DISABLED_RADIO_HW this means that by default the radio is enabled by the hardware button (if present) and can only be disabled explicitely. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Don't use changed_flags inside configure_packet_filterIvo van Doorn2007-10-107-15/+20
| | | | | | | | | | | | | | We shouldn't use changed_flags when configuring the packet filter, we work directly with the total_flags which is safe enough since we already check if something has changed after we applied our packet filtering flag rules. Also make sure that when the packet filter is scheduled, the rt2x00dev->interface.filter is cleared to make sure the drivers will update the packet filter instead of failing at the check: *total_flags == rt2x00dev->interface.filter Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Move rt2x00dev flags into enumerationIvo van Doorn2007-10-101-16/+33
| | | | | | | | | | By putting the flags into a enumeration we can make it easier maintable since we don't have to assign numbers for each flag. This makes it easier to insert and remove flags. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Store "STARTED" state during suspendIvo van Doorn2007-10-102-3/+5
| | | | | | | | | | Store the started state into a new flag DEVICE_STARTED_SUSPEND and set this when suspending while the device was started. We can't check for is_interface_present() since only mac80211 knows if there are monitor interfaces present. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Remove radio check from rt2x00lib_toggle_rxIvo van Doorn2007-10-101-3/+0
| | | | | | | | | | | Don't check if the radio is enabled in rt2x00lib_toggle_rx, this is required since the link tuner should be disabled when shutting down the device. The remaining calls inside the rt2x00lib_toggle_rx handler should deliver no problems when called while the radio is done. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rt2x00: Remove duplicate code in MAC & BSSID handlingIvo van Doorn2007-10-107-118/+76
| | | | | | | | | The various drivers contained duplicate code to handle the MAC and BSSID initialization correctly. This moves the address copy to little endian variables to rt2x00config. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] p54usb: Add device ID for Linksys WUSB54AGMartti Huttunen2007-10-101-0/+1
| | | | | | | Add the device ID for Linksys WUSB54AG. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] rtl8187: Add device ID for HP wireless print kit usb dongleMichael Wu2007-10-101-0/+2
| | | | | | | | | This adds the device ID for the HP wireless print kit usb dongle. Thanks to Thierry Merle for the patch to the original rtl8187 driver. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] ipw2200: batch non-user-requested scan result notificationsDan Williams2007-10-102-10/+49
| | | | | | | | | | | | | | ipw2200 makes extensive use of background scanning when unassociated or down. Unfortunately, the firmware sends scan completed events many times per second, which the driver pushes directly up to userspace. This needlessly wakes up processes listening for wireless events many times per second. Batch together scan completed events for non-user-requested scans and send them up to userspace every 4 seconds. Scan completed events resulting from an SIOCSIWSCAN call are pushed up without delay. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] Add Linksys card to HostAP driverMarcin Juszkiewicz2007-10-101-0/+4
| | | | | | | | | Socket 1: product info: "The Linksys Group, Inc.", "Wireless Network CF Card", "ISL37300P", "RevA" manfid: 0x0274, 0x3301 Signed-off-by: Marcin Juszkiewicz <openembedded@haerwu.biz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] zd1211rw: Add ID for TalkTalk SNU5630NS/05Daniel Drake2007-10-101-0/+1
| | | | | | | | Tested by Su-Jong You zd1211b chip 0471:1237 v4810 high 00-12-bf AL2230_RF pa0 g--N Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] hostap_cs: Add device ID for Telekom T-Sinus 111cardStefan Lippers-Hollmann2007-10-101-0/+1
| | | | | | | | | | | | | | | | | | | | This adds the PCMCIA device ID for the Deutsche Telekom T-Sinus 111card to hostap_cs. $ /sbin/lspcmcia -v [...] Socket 0 Device 0: [hostap_cs] (bus ID: 0.0) Configuration: state: on Product Name: T-Sinus 111card 2.0.0 Identification: manf_id: 0x01bf card_id: 0x3301 function: 6 (network) prod_id(1): "T-Sinus" (0x8c389dc1) prod_id(2): "111card" (0x6a23ac17) prod_id(3): --- (---) prod_id(4): "2.0.0" (0x92b9effb) Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [NETNS]: Move some code into __init section when CONFIG_NET_NS=nPavel Emelyanov2007-10-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | With the net namespaces many code leaved the __init section, thus making the kernel occupy more memory than it did before. Since we have a config option that prohibits the namespace creation, the functions that initialize/finalize some netns stuff are simply not needed and can be freed after the boot. Currently, this is almost not noticeable, since few calls are no longer in __init, but when the namespaces will be merged it will be possible to free more code. I propose to use the __net_init, __net_exit and __net_initdata "attributes" for functions/variables that are not used if the CONFIG_NET_NS is not set to save more space in memory. The exiting functions cannot just reside in the __exit section, as noticed by David, since the init section will have references on it and the compilation will fail due to modpost checks. These references can exist, since the init namespace never dies and the exit callbacks are never called. So I introduce the __exit_refok attribute just like it is already done with the __init_refok. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [ISDN]: Change I4L to use alloc_netdev().Karsten Keil2007-10-102-84/+91
| | | | | Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TG3]: Fix ethtool autonegotiate flags.Andy Gospodarek2007-10-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I recently noticed that when calling: # ethtool -s eth0 autoneg on on a 5722 (though I'm sure it's not specific to that card) that subsequent checks of the cards status looked like this: # ethtool eth0 Settings for eth0: Supported ports: [ MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised auto-negotiation: No <---- This seems odd?!? Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: d Current message level: 0x000000ff (255) Link detected: yes I noticed that the following commit: commit 3600d918d870456ea8e7bb9d47f327de5c20f3d6 Author: Michael Chan <mchan@broadcom.com> Date: Thu Dec 7 00:21:48 2006 -0800 [TG3]: Allow partial speed advertisement. Honor the advertisement bitmask from ethtool. We used to always advertise the full capability when autoneg was set to on. changed things around so that ethtool speed settings were strictly followed. Unfortunately ethtool doesn't seem to set ADVERTISED_Autoneg in the advertising field (and maybe it shouldn't have to). I'd vote that it should be fixed there, but it should also be added here just in case someone using ethtool ioctls in their own application gets what they want. Adding that flag in tg3_set_settings seemed like the most logical place since the driver works fine on boot. This is just an issue when re-enabling autonegotiation, so we should probably nip it there. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IRDA]: Oops fix for ksdazzleAlex Villacís Lasso2007-10-101-3/+13
| | | | | | | | | This fixes a kernel oops triggered by the ksdazzle SIR driver. We need more space for input frames, and 2048 should be plenty of it. Signed-off-by: Alex Villacís Lasso <a_villacis@palosanto.com> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TG3]: Update version to 3.82.Michael Chan2007-10-101-2/+2
| | | | | Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TG3]: Add 5784 and 5764 support.Matt Carlson2007-10-102-12/+55
| | | | | | | | This patch adds the support for 5784 and 5764 devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TG3]: ASIC decoding and basic CPMU support.Matt Carlson2007-10-102-8/+22
| | | | | | | | | | | | | Newer products change the way the ASIC revision is obtained. This patch implements how the driver will extract the revision number. This patch also adds preliminary CPMU support. CPMU stands for Central Power Management Unit. The CPMU's role is to put the chip into lower power states when the operating conditions allow it. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TG3]: Walk PCI capability lists.Matt Carlson2007-10-102-39/+37
| | | | | | | | | | | Newer tg3 devices shuffle around the registers in PCI configuration space. This patch changes the way the driver accesses the PCI capabilities registers. Hardcoded register locations are replaced with offsets from pci_find_capability() return values. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.1 at 2024-10-31 04:21:46 +0000