aboutsummaryrefslogtreecommitdiffstats
path: root/fs/ceph/inode.c
Commit message (Collapse)AuthorAgeFilesLines
* ceph: use ihold when we already have an inode refSage Weil2011-06-071-8/+10
| | | | | | | | We should use ihold whenever we already have a stable inode ref, even when we aren't holding i_lock. This avoids adding new and unnecessary locking dependencies. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: do not use i_wrbuffer_ref as refcount for Fb capHenry C Chang2011-05-111-0/+1
| | | | | | | | | | | | | | We increments i_wrbuffer_ref when taking the Fb cap. This breaks the dirty page accounting and causes looping in __ceph_do_pending_vmtruncate, and ceph client hangs. This bug can be reproduced occasionally by running blogbench. Add a new field i_wb_ref to inode and dedicate it to Fb reference counting. Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: do not call __mark_dirty_inode under i_lockSage Weil2011-05-041-1/+5
| | | | | | | | The __mark_dirty_inode helper now takes i_lock as of 250df6ed. Fix the one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the flags value so that the callers can do it outside of i_lock. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: add ino32 mount optionYehuda Sadeh2011-03-211-1/+8
| | | | | | | The ino32 mount option forces the ceph fs to report 32 bit ino values. This is useful for 64 bit kernels with 32 bit userspace. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
* ceph: preserve I_COMPLETE across renameSage Weil2011-03-151-8/+8
| | | | | | | | | | | | | | d_move puts the renamed dentry at the end of d_subdirs, screwing with our cached dentry directory offsets. We were just clearing I_COMPLETE to avoid any possibility of trouble. However, assigning the renamed dentry an offset at the end of the directory (to match it's new d_subdirs position) is sufficient to maintain correct behavior and hold onto I_COMPLETE. This is especially important for workloads like rsync, which renames files into place. Before, we would lose I_COMPLETE and do MDS lookups for each file. With this patch we only talk to the MDS on create and rename. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: do not set I_COMPLETESage Weil2011-03-031-1/+1
| | | | | | | Do not set the I_COMPLETE flag on directories until we resolve races with dcache pruning. Signed-off-by: Sage Weil <sage@newdream.net>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-01-281-5/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: avoid picking MDS that is not active ceph: avoid immediate cap check after import ceph: fix flushing of caps vs cap import ceph: fix erroneous cap flush to non-auth mds ceph: fix cap_wanted_delay_{min,max} mount option initialization ceph: fix xattr rbtree search ceph: fix getattr on directory when using norbytes
| * ceph: fix getattr on directory when using norbytesYehuda Sadeh2011-01-131-5/+5
| | | | | | | | | | | | | | | | | | The norbytes mount option was broken, and when doing getattr on a directory it return the rbytes instead of the number of entities. This commit fixes it. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
* | Merge branch 'for-linus' of ↵Linus Torvalds2011-01-131-0/+4
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: fix cleanup when trying to mount inexistent image net/ceph: make ceph_msgr_wq non-reentrant ceph: fsc->*_wq's aren't used in memory reclaim path ceph: Always free allocated memory in osdmap_decode() ceph: Makefile: Remove unnessary code ceph: associate requests with opening sessions ceph: drop redundant r_mds field ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS ceph: add dir_layout to inode
| * ceph: implement DIRLAYOUTHASH feature to get dir layout from MDSSage Weil2011-01-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
| * ceph: add dir_layout to inodeSage Weil2011-01-121-0/+2
| | | | | | | | | | | | | | | | | | Add a ceph_dir_layout to the inode, and calculate dentry hash values based on the parent directory's specified dir_hash function. This is needed because the old default Linux dcache hash function is extremely week and leads to a poor distribution of files among dir fragments. Signed-off-by: Sage Weil <sage@newdream.net>
* | fs: provide rcu-walk aware permission i_opsNick Piggin2011-01-071-3/+8
| | | | | | | | Signed-off-by: Nick Piggin <npiggin@kernel.dk>
* | fs: icache RCU free inodesNick Piggin2011-01-071-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RCU free the struct inode. This will allow: - Subsequent store-free path walking patch. The inode must be consulted for permissions when walking, so an RCU inode reference is a must. - sb_inode_list_lock to be moved inside i_lock because sb list walkers who want to take i_lock no longer need to take sb_inode_list_lock to walk the list in the first place. This will simplify and optimize locking. - Could remove some nested trylock loops in dcache code - Could potentially simplify things a bit in VM land. Do not need to take the page lock to follow page->mapping. The downsides of this is the performance cost of using RCU. In a simple creat/unlink microbenchmark, performance drops by about 10% due to inability to reuse cache-hot slab objects. As iterations increase and RCU freeing starts kicking over, this increases to about 20%. In cases where inode lifetimes are longer (ie. many inodes may be allocated during the average life span of a single inode), a lot of this cache reuse is not applicable, so the regression caused by this patch is smaller. The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU, however this adds some complexity to list walking and store-free path walking, so I prefer to implement this at a later date, if it is shown to be a win in real situations. I haven't found a regression in any non-micro benchmark so I doubt it will be a problem. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
* | fs: dcache remove dcache_lockNick Piggin2011-01-071-4/+0
| | | | | | | | | | | | dcache_lock no longer protects anything. remove it. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
* | fs: dcache scale subdirsNick Piggin2011-01-071-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | Protect d_subdirs and d_child with d_lock, except in filesystems that aren't using dcache_lock for these anyway (eg. using i_mutex). Note: if we change the locking rule in future so that ->d_child protection is provided only with ->d_parent->d_lock, it may allow us to reduce some locking. But it would be an exception to an otherwise regular locking scheme, so we'd have to see some good results. Probably not worthwhile. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
* | fs: dcache scale dentry refcountNick Piggin2011-01-071-2/+2
|/ | | | | | | | Make d_count non-atomic and protect it with d_lock. This allows us to ensure a 0 refcount dentry remains 0 without dcache_lock. It is also fairly natural when we start protecting many other dentry members with d_lock. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-11-191-18/+31
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: fix readdir EOVERFLOW on 32-bit archs ceph: fix frag offset for non-leftmost frags ceph: fix dangling pointer ceph: explicitly specify page alignment in network messages ceph: make page alignment explicit in osd interface ceph: fix comment, remove extraneous args ceph: fix update of ctime from MDS ceph: fix version check on racing inode updates ceph: fix uid/gid on resent mds requests ceph: fix rdcache_gen usage and invalidate ceph: re-request max_size if cap auth changes ceph: only let auth caps update max_size ceph: fix open for write on clustered mds ceph: fix bad pointer dereference in ceph_fill_trace ceph: fix small seq message skipping Revert "ceph: update issue_seq on cap grant"
| * ceph: make page alignment explicit in osd interfaceSage Weil2010-11-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | We used to infer alignment of IOs within a page based on the file offset, which assumed they matched. This broke with direct IO that was not aligned to pages (e.g., 512-byte aligned IO). We were also trusting the alignment specified in the OSD reply, which could have been adjusted by the server. Explicitly specify the page alignment when setting up OSD IO requests. Signed-off-by: Sage Weil <sage@newdream.net>
| * ceph: fix update of ctime from MDSSage Weil2010-11-081-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | The client can have a newer ctime than the MDS due to AUTH_EXCL and XATTR_EXCL caps as well; update the check in ceph_fill_file_time appropriately. This fixes cases where ctime/mtime goes backward under the right sequence of local updates (e.g. chmod) and mds replies (e.g. subsequent stat that goes to the MDS). Signed-off-by: Sage Weil <sage@newdream.net>
| * ceph: fix version check on racing inode updatesSage Weil2010-11-081-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | We may get updates on the same inode from multiple MDSs; generally we only pay attention if the update is newer than what we already have. The exception is when an MDS sense unstable information, in which case we always update. The old > check got this wrong when our version was odd (e.g. 3) and the reply version was even (e.g. 2): the older stale (v2) info would be applied. Fixed and clarified the comment. Signed-off-by: Sage Weil <sage@newdream.net>
| * ceph: fix rdcache_gen usage and invalidateSage Weil2010-11-081-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We used to use rdcache_gen to indicate whether we "might" have cached pages. Now we just look at the mapping to determine that. However, some old behavior remains from that transition. First, rdcache_gen == 0 no longer means we have no pages. That can happen at any time (presumably when we carry FILE_CACHE). We should not reset it to zero, and we should not check that it is zero. That means that the only purpose for rdcache_revoking is to resolve races between new issues of FILE_CACHE and an async invalidate. If they are equal, we should invalidate. On success, we decrement rdcache_revoking, so that it is no longer equal to rdcache_gen. Similarly, if we success in doing a sync invalidate, set revoking = gen - 1. (This is a small optimization to avoid doing unnecessary invalidate work and does not affect correctness.) Signed-off-by: Sage Weil <sage@newdream.net>
| * ceph: only let auth caps update max_sizeSage Weil2010-11-071-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Only the auth MDS has a meaningful max_size value for us, so only update it in fill_inode if we're being issued an auth cap. Otherwise, a random stat result from a non-auth MDS can clobber a meaningful max_size, get the client<->mds cap state out of sync, and make writes hang. Specifically, even if the client re-requests a larger max_size (which it will), the MDS won't respond because as far as it knows we already have a sufficiently large value. Signed-off-by: Sage Weil <sage@newdream.net>
| * ceph: fix bad pointer dereference in ceph_fill_traceSage Weil2010-11-071-1/+2
| | | | | | | | | | | | | | | | We dereference *in a few lines down, but only set it on rename. It is apparently pretty rare for this to trigger, but I have been hitting it with a clustered MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
* | BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann2010-11-171-1/+0
|/ | | | | | | | | | The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ceph: factor out libceph from Ceph file systemYehuda Sadeh2010-10-201-9/+10
| | | | | | | | | | | | | | | | | | | | | | This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: fix dn offset during readdir_prepopulateSage Weil2010-09-131-5/+6
| | | | | | | | | | | When adding the readdir results to the cache, ceph_set_dentry_offset was clobbered our just-set offset. This can cause the readdir result offsets to get out of sync with the server. Add an argument to the helper so that it does not. This bug was introduced by 1cd3935bedccf592d44343890251452a6dd74fc4. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: ceph_get_inode() returns an ERR_PTRDan Carpenter2010-08-251-2/+2
| | | | | | | ceph_get_inode() returns an ERR_PTR and it doesn't return a NULL. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: don't improperly set dir complete when holding EXCL capSage Weil2010-08-221-0/+1
| | | | | | | | | If we hold the EXCL cap, we cannot trust the dir stats from the MDS (num files, subdirs) and must not incorrectly conclude that the directory is empty. If we do, we get can bad results from lookup (bad ENOENT) and bad readdir results. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: perform lazy reads when file mode and caps permitSage Weil2010-08-011-2/+3
| | | | | | | | | If the file mode is marked as "lazy," perform cached/buffered reads when the caps permit it. Adjust the rdcache_gen and invalidation logic accordingly so that we manage our cache based on the FILE_CACHE -or- FILE_LAZYIO cap bits. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: use complete_all and wake_up_allYehuda Sadeh2010-07-271-1/+1
| | | | | | | | | | This fixes an issue triggered by running concurrent syncs. One of the syncs would go through while the other would just hang indefinitely. In any case, we never actually want to wake a single waiter, so the *_all functions should be used. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: fix leak of dentry in ceph_init_dentry() error pathSage Weil2010-07-231-1/+3
| | | | | | If we fail to allocate a ceph_dentry_info, don't leak the dn reference. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: handle splice_dentry/d_materialize_unique error in readdir_prepopulateSage Weil2010-06-211-7/+12
| | | | | | | Handle a splice_dentry failure (due to a d_materialize_unique error) without crashing. (Also, report the error code.) Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: fix d_subdirs ordering problemHenry C Chang2010-06-011-1/+1
| | | | | | | | | | | | | | We misused list_move_tail() to order the dentry in d_subdirs. This will screw up the d_subdirs order. This bug can be reliably reproduced by: 1. mount ceph fs. 2. on ceph fs, git clone git://ceph.newdream.net/git/ceph.git 3. Run autogen.sh in ceph directory. (Note: Errors only occur at the first time you run autogen.sh.) Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com> Signed-off-by: Sage Weil <sage@newdream.net>
* fs/ceph: Use ERR_CASTJulia Lawall2010-05-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more clear what is the purpose of the operation, which otherwise looks like a no-op. In the case of fs/ceph/inode.c, ERR_CAST is not needed, because the type of the returned value is the same as the type of the enclosing function. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T x; identifier f; @@ T f (...) { <+... - ERR_PTR(PTR_ERR(x)) + x ...+> } @@ expression x; @@ - ERR_PTR(PTR_ERR(x)) + ERR_CAST(x) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: use common helper for aborted dir request invalidationSage Weil2010-05-171-15/+2
| | | | | | | We invalidate I_COMPLETE and dentry leases in two places: on aborted mds request and on request replay. Use common helper to avoid duplicate code. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: set dn offset when splicedSage Weil2010-05-171-34/+37
| | | | | | | | | | We want to assign an offset when the dentry goes from null to linked, which is always done by splice_dentry(). Notably, we should NOT assign an offset when a dentry is first created and is still null. BUG if we try to splice a non-null dentry (we shouldn't). Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: don't clobber i_max_offset on already complete dirSage Weil2010-05-171-1/+2
| | | | | | | This can screw up offsets assigned to new dentries and break dcache readdir results. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: skip set_dentry_offset work if directory not I_COMPLETESage Weil2010-05-171-0/+4
| | | | Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: fix xattr dangling pointer / double freeSage Weil2010-05-171-0/+1
| | | | | | | | If we use the xattr_blob, clear the pointer so we don't release the memory at the bottom of the fuction. Reported-by: Henry C Chang <henry_c_chang@tcloudcomputing.com> Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: use ceph_sb_to_client instead of ceph_clientCheng Renquan2010-05-171-5/+5
| | | | | | | | | | | | | | | ceph_sb_to_client and ceph_client are really identical, we need to dump one; while function ceph_client is confusing with "struct ceph_client", ceph_sb_to_client's definition is more clear; so we'd better switch all call to ceph_sb_to_client. -static inline struct ceph_client *ceph_client(struct super_block *sb) -{ - return sb->s_fs_info; -} Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: invalidate affected dentry leases on aborted requestsSage Weil2010-05-171-2/+11
| | | | | | | | | | | | | If we abort a request, we return to caller, but the request may still complete. And if we hold the dir FILE_EXCL bit, we may not release a lease when sending a request. A simple un-tar, control-c, un-tar again will reproduce the bug (manifested as a 'Cannot open: File exists'). Ensure we invalidate affected dentry leases (as well dir I_COMPLETE) so we don't have valid (but incorrect) leases. Do the same, consistently, at other sites where I_COMPLETE is similarly cleared. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: fix open file counting on snapped inodes when mds returns no capsSage Weil2010-05-111-0/+4
| | | | | | | | | It's possible the MDS will not issue caps on a snapped inode, in which case an open request may not __ceph_get_fmode(), botching the open file counting. (This is actually a server bug, but the client shouldn't BUG out in this case.) Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: clear dir complete on d_moveSage Weil2010-05-031-0/+4
| | | | | | | | d_move() reorders the d_subdirs list, breaking the readdir result caching. Unless/until d_move preserves that ordering, clear CEPH_I_COMPLETE on rename. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: fix dentry rehashing on virtual .snap dirSage Weil2010-03-301-1/+9
| | | | | | | | | | | | | | | | | | | If a lookup fails on the magic .snap directory, we bind it to a magic snap directory inode in ceph_lookup_finish(). That code assumes the dentry is unhashed, but a recent server-side change started returning NULL leases on lookup failure, causing the .snap dentry to be hashed and NULL by ceph_fill_trace(). This causes dentry hash chain corruption, or a dies when d_rehash() includes BUG_ON(!d_unhashed(entry)); So, avoid processing the NULL dentry lease if it the dentry matches the snapdir name in ceph_fill_trace(). That allows the lookup completion to properly bind it to the snapdir inode. BUG there if dentry is hashed to be sure. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: fix inode removal from snap realm when racing with migrationSage Weil2010-03-201-0/+16
| | | | | | | | | | | When an inode was dropped while being migrated between two MDSs, i_cap_exporting_issued was non-zero such that issue caps were non-zero and __ceph_is_any_caps(ci) was true. This prevented the inode from being removed from the snap realm, even as it was dropped from the cache. Fix this by dropping any residual i_snap_realm ref in destroy_inode. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: don't truncate dirty pages in invalidate work threadYehuda Sadeh2010-02-191-1/+45
| | | | | | | | | Instead of truncating the whole range of pages, we skip those pages that are dirty or in the middle of writeback. Those pages will be cleared later when the writeback completes. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: fix typo in ceph_queue_writeback debug outputSage Weil2010-02-171-2/+2
| | | | Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: cleanup async writeback, truncation, invalidate helpersSage Weil2010-02-111-9/+52
| | | | | | | Grab inode ref in helper. Make work functions static, with consistent naming. Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: fix truncation when not holding capsYehuda Sadeh2010-02-111-2/+10
| | | | | | | | | | | A truncation should occur when either we have the specified caps for the file, or (in cases where we are not the only ones referencing the file) when it is mapped or when it is opened. The latter two cases were not handled. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
* ceph: remove unreachable codeYehuda Sadeh2010-01-291-9/+0
| | | | | | | We never truncate to a smaller size without contacting the MDS. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
generated by cgit v1.1 at 2024-05-30 22:56:19 +0000