aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-generic
Commit message (Collapse)AuthorAgeFilesLines
* Fix misspellings collected by members of KJ list.Robert P. J. Day2007-05-091-1/+1
| | | | | | | | Fix the misspellings of "propogate", "writting" and (oh, the shame :-) "kenrel" in the source tree. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* local_t: architecture independent extensionMathieu Desnoyers2007-05-081-10/+23
| | | | | | | | | | | | | | | | | This series extena and standardises local_t operations on each architecture, allowing a rich set of atomic operations to be done on per-cpu data with minimal performance impact. On architectures where there seems to be no difference between the SMP and UP operation (same memory barriers, same LOCKing), local.h simply includes asm-generic/local.h, which removes duplicated code from the current kernel tree. This patch: local_t: architecture independent extension Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atomic.h: atomic_add_unless as inline. Remove system.h atomic.h circular ↵Mathieu Desnoyers2007-05-081-5/+12
| | | | | | | | | | | | | | | | | | | | | | | dependency atomic_add_unless as inline. Remove system.h atomic.h circular dependency. I agree (with Andi Kleen) this typeof is not needed and more error prone. All the original atomic.h code that uses cmpxchg (which includes the atomic_add_unless) uses defines instead of inline functions, probably to circumvent a circular dependency between system.h and atomic.h on powerpc (which my patch addresses). Therefore, it makes sense to use inline functions that will provide type checking. atomic_add_unless as inline. Remove system.h atomic.h circular dependency. Digging into the FRV architecture shows me that it is also affected by such a circular dependency. Here is the diff applying this against the rest of my atomic.h patches. It applies over the atomic.h standardization patches. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atomic.h: complete atomic_long operations in asm-genericMathieu Desnoyers2007-05-081-0/+133
| | | | | | Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* move die notifier handling to common codeChristoph Hellwig2007-05-081-0/+8
| | | | | | | | | | | | | | | | | | | | | | | This patch moves the die notifier handling to common code. Previous various architectures had exactly the same code for it. Note that the new code is compiled unconditionally, this should be understood as an appel to the other architecture maintainer to implement support for it aswell (aka sprinkling a notify_die or two in the proper place) arm had a notifiy_die that did something totally different, I renamed it to arm_notify_die as part of the patch and made it static to the file it's declared and used at. avr32 used to pass slightly less information through this interface and I brought it into line with the other architectures. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix vmalloc_sync_all bustage] [bryan.wu@analog.com: fix vmalloc_sync_all in nommu] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] i386: Clean up ELF note generationJeremy Fitzhardinge2007-05-021-1/+1
| | | | | | | | | | | | | | | | | Three cleanups: 1: ELF notes are never mapped, so there's no need to have any access flags in their phdr. 2: When generating them from asm, tell the assembler to use a SHT_NOTE section type. There doesn't seem to be a way to do this from C. 3: Use ANSI rather than traditional cpp behaviour to stringify the macro argument. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Eric W. Biederman <ebiederm@xmission.com>
* [PATCH] x86: PARAVIRT: add hooks to intercept mm creation and destructionJeremy Fitzhardinge2007-05-021-0/+18
| | | | | | | | | | | | | | | | | | | | | Add hooks to allow a paravirt implementation to track the lifetime of an mm. Paravirtualization requires three hooks, but only two are needed in common code. They are: arch_dup_mmap, which is called when a new mmap is created at fork arch_exit_mmap, which is called when the last process reference to an mm is dropped, which typically happens on exit and exec. The third hook is activate_mm, which is called from the arch-specific activate_mm() macro/function, and so doesn't need stub versions for other architectures. It's called when an mm is first used. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: linux-arch@vger.kernel.org Cc: James Bottomley <James.Bottomley@SteelEye.com> Acked-by: Ingo Molnar <mingo@elte.hu>
* [PATCH] i386: Use per-cpu variables for GDT, PDARusty Russell2007-05-021-0/+1
| | | | | | | | | | | | Allocating PDA and GDT at boot is a pain. Using simple per-cpu variables adds happiness (although we need the GDT page-aligned for Xen, which we do in a followup patch). [akpm@linux-foundation.org: build fix] Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2007-04-271-0/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (448 commits) [IPV4] nl_fib_lookup: Initialise res.r before fib_res_put(&res) [IPV6]: Fix thinko in ipv6_rthdr_rcv() changes. [IPV4]: Add multipath cached to feature-removal-schedule.txt [WIRELESS] cfg80211: Clarify locking comment. [WIRELESS] cfg80211: Fix locking in wiphy_new. [WEXT] net_device: Don't include wext bits if not required. [WEXT]: Misc code cleanups. [WEXT]: Reduce inline abuse. [WEXT]: Move EXPORT_SYMBOL statements where they belong. [WEXT]: Cleanup early ioctl call path. [WEXT]: Remove options. [WEXT]: Remove dead debug code. [WEXT]: Clean up how wext is called. [WEXT]: Move to net/wireless [AFS]: Eliminate cmpxchg() usage in vlocation code. [RXRPC]: Fix pointers passed to bitops. [RXRPC]: Remove bogus atomic_* overrides. [AFS]: Fix u64 printing in debug logging. [AFS]: Add "directory write" support. [AFS]: Implement the CB.InitCallBackState3 operation. ...
| * [NET]: div64_64 consolidate (rev3)Stephen Hemminger2007-04-251-0/+7
| | | | | | | | | | | | | | Here is the current version of the 64 bit divide common code. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [S390] split page_test_and_clear_dirty.Martin Schwidefsky2007-04-271-2/+9
|/ | | | | | | | | | | | | The page_test_and_clear_dirty primitive really consists of two operations, page_test_dirty and the page_clear_dirty. The combination of the two is not an atomic operation, so it makes more sense to have two separate operations instead of one. In addition to the improved readability of the s390 version of SetPageUptodate, it now avoids the page_test_dirty operation which is an insert-storage-key-extended (iske) instruction which is an expensive operation. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [PATCH] Proper fix for highmem kmap_atomic functions for VMI for 2.6.21Zachary Amsden2007-04-081-0/+2
| | | | | | | | | | | | | | | | | | | | Since lazy MMU batching mode still allows interrupts to enter, it is possible for interrupt handlers to try to use kmap_atomic, which fails when lazy mode is active, since the PTE update to highmem will be delayed. The best workaround is to issue an explicit flush in kmap_atomic_functions case; this is the only way nested PTE updates can happen in the interrupt handler. Thanks to Jeremy Fitzhardinge for noting the bug and suggestions on a fix. This patch gets reverted again when we start 2.6.22 and the bug gets fixed differently. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@muc.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Revert "[PATCH] LOG2: Alter get_order() so that it can make use of ilog2() ↵Linus Torvalds2007-03-061-34/+4
| | | | | | | | | | | | | | | | | | | | | | | | | on a constant" This reverts commit 39d61db0edb34d60b83c5e0d62d0e906578cc707. The commit was buggy in multiple ways: - the conversion to ilog2() was incorrect to begin with - it tested the wrong #defines, so on all architectures but FRV you'd never see the bug except for constant arguments. - the new "get_order()" macro used its arguments multiple times, and didn't even parenthesize them properly - despite the comments, it was not true that you could use it for constant initializers, since not all architectures even use the generic page.h header file. All of the problems are individually fixable, but it all boils down to: better just revert it, and re-do it from scratch. Cc: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] i386: paravirt CPU hypercall batching modeZachary Amsden2007-02-131-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | The VMI ROM has a mode where hypercalls can be queued and batched. This turns out to be a significant win during context switch, but must be done at a specific point before side effects to CPU state are visible to subsequent instructions. This is similar to the MMU batching hooks already provided. The same hooks could be used by the Xen backend to implement a context switch multicall. To explain a bit more about lazy modes in the paravirt patches, basically, the idea is that only one of lazy CPU or MMU mode can be active at any given time. Lazy MMU mode is similar to this lazy CPU mode, and allows for batching of multiple PTE updates (say, inside a remap loop), but to avoid keeping some kind of state machine about when to flush cpu or mmu updates, we just allow one or the other to be active. Although there is no real reason a more comprehensive scheme could not be implemented, there is also no demonstrated need for this extra complexity. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
* [PATCH] GPIO coreDavid Brownell2007-02-121-0/+25
| | | | | | | | | | | | | | | | | | | | | | This defines a simple and minimalist programming interface for GPIO APIs: - Documentation/gpio.txt ... describes things (read it) - include/asm-arm/gpio.h ... defines the ARM hook, which just punts to <asm/arch/gpio.h> for any implementation - include/asm-generic/gpio.h ... implement "can sleep" variants as calling the normal ones, for systems that don't handle i2c expanders. The immediate need for such a cross-architecture API convention is to support drivers that work the same on AT91 ARM and AVR32 AP7000 chips, which embed many of the same controllers but have different CPUs. However, several other users have been reported, including a driver for a hardware watchdog chip and some handhelds.org multi-CPU button drivers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] one more iomap s390 build fixHeiko Carstens2007-02-111-1/+3
| | | | | | | | | | | | | | | | | | Commit 9ac7849e35f705830f7b016ff272b0ff1f7ff759 causes this on S390: drivers/built-in.o: In function `dmam_noncoherent_release': dma-mapping.c:(.text+0x1515c): undefined reference to `dma_free_noncoherent' drivers/built-in.o: In function `dmam_free_noncoherent': undefined reference to `dma_free_noncoherent' drivers/built-in.o: In function `dmam_alloc_noncoherent': undefined reference to `dma_alloc_noncoherent' make: *** [.tmp_vmlinux1] Error 1 Cc: Tejun Heo <htejun@gmail.com> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] typeof __page_to_pfn with SPARSEMEM=yRandy Dunlap2007-02-111-1/+1
| | | | | | | | | | | | With CONFIG_SPARSEMEM=y: mm/rmap.c:579: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'int' Make __page_to_pfn() return unsigned long. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] Remove final references to deprecated "MAP_ANON" page protection flagRobert P. J. Day2007-02-111-1/+0
| | | | | | | | | Remove the last vestiges of the long-deprecated "MAP_ANON" page protection flag: use "MAP_ANONYMOUS" instead. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix Maple PATA IRQ assignment.David Woodhouse2007-01-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | On the Maple board, the AMD8111 IDE is in legacy mode... except that it appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by the architecture's "pci_get_legacy_ide_irq()" function, but in libata we just hard-code the numbers 14 and 15. This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as appropriate, having added a pci_dev argument to the ATA_{PRIM,SECOND}ARY_IRQ macros. There's probably a better way to do this -- especially if we observe that the _only_ case in which this seemingly-generic "pci_get_legacy_ide_irq()" function returns anything other than 14 and 15 for primary and secondary respectively is the case of the AMD8111 on the Maple board -- couldn't we handle that with a special case in the pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into native mode during early boot and assign resources properly? Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] change WARN_ON back to "BUG: at ..."Ingo Molnar2006-12-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARN_ON() ever triggering is a kernel bug. Do not try to paper over this fact by suggesting to the user that this is 'only' a warning, as the following recent commit does: commit 30e25b71e725b150585e17888b130e3324f8cf7c Author: Jeremy Fitzhardinge <jeremy@goop.org> Date: Fri Dec 8 02:36:24 2006 -0800 [PATCH] Fix generic WARN_ON message A warning is a warning, not a BUG. ( it might make sense to rename BUG() to CRASH() and BUG_ON() to CRASH_ON(), but that does not change the fact that WARN_ON() signals a kernel bug. ) i and others objected to this change during lkml review: http://marc.theaimsgroup.com/?l=linux-kernel&m=116115160710533&w=2 still the change slipped upstream - grumble :) Also, use the standard "BUG: " format to make it easier to grep logs and to make it easier to google for kernel bugs. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* PCI: Fix multiple problems with VIA hardwareAlan Cox2006-12-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is designed to fix: - Disk eating corruptor on KT7 after resume from RAM - VIA IRQ handling - VIA fixups for bus lockups after resume from RAM The core of this is to add a table of resume fixups run at resume time. We need to do this for a variety of boards and features, but particularly we need to do this to get various critical VIA fixups done on resume. The second part of the problem is to handle VIA IRQ number rules which are a bit odd and need special handling for PIC interrupts. Various patches broke various boxes and while this one may not be perfect (hopefully it is) it ensures the workaround is applied to the right devices only. From: Jean Delvare <khali@linux-fr.org> Now that PCI quirks are replayed on software resume, we can safely re-enable the Asus SMBus unhiding quirk even when software suspend support is enabled. [akpm@osdl.org: fix const warning] Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Remove stack unwinder for nowLinus Torvalds2006-12-151-22/+0
| | | | | | | | | | It has caused more problems than it ever really solved, and is apparently not getting cleaned up and fixed. We can put it back when it's stable and isn't likely to make warning or bug events worse. In the meantime, enable frame pointers for more readable stack traces. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Make sure we populate the initroot filesystem late enoughLinus Torvalds2006-12-111-0/+1
| | | | | | | | We should not initialize rootfs before all the core initializers have run. So do it as a separate stage just before starting the regular driver initializers. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tty: switch to ktermiosAlan Cox2006-12-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the grungy swap all the occurrences in the right places patch that goes with the updates. At this point we have the same functionality as before (except that sgttyb() returns speeds not zero) and are ready to begin turning new stuff on providing nobody reports lots of bugs If you are a tty driver author converting an out of tree driver the only impact should be termios->ktermios name changes for the speed/property setting functions from your upper layers. If you are implementing your own TCGETS function before then your driver was broken already and its about to get a whole lot more painful for you so please fix it 8) Also fill in c_ispeed/ospeed on init for most devices, although the current code will do this for you anyway but I'd like eventually to lose that extra paranoia [akpm@osdl.org: bluetooth fix] [mp3@de.ibm.com: sclp fix] [mp3@de.ibm.com: warning fix for tty3270] [hugh@veritas.com: fix tty_ioctl powerpc build] [jdike@addtoit.com: uml: fix ->set_termios declaration] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Acked-by: Peter Oberparleiter <oberpar@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] LOG2: Alter get_order() so that it can make use of ilog2() on a constantDavid Howells2006-12-081-4/+34
| | | | | | | | | | | | Alter get_order() so that it can make use of ilog2() on a constant to produce a constant value, retaining the ability for an arch to override it in the non-const case. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Fix generic WARN_ON messageJeremy Fitzhardinge2006-12-081-1/+1
| | | | | | | | | A warning is a warning, not a BUG. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Generic BUG implementationJeremy Fitzhardinge2006-12-082-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds common handling for kernel BUGs, for use by architectures as they wish. The code is derived from arch/powerpc. The advantages of having common BUG handling are: - consistent BUG reporting across architectures - shared implementation of out-of-line file/line data - implement CONFIG_DEBUG_BUGVERBOSE consistently This means that in inline impact of BUG is just the illegal instruction itself, which is an improvement for i386 and x86-64. A BUG is represented in the instruction stream as an illegal instruction, which has file/line information associated with it. This extra information is stored in the __bug_table section in the ELF file. When the kernel gets an illegal instruction, it first confirms it might possibly be from a BUG (ie, in kernel mode, the right illegal instruction). It then calls report_bug(). This searches __bug_table for a matching instruction pointer, and if found, prints the corresponding file/line information. If report_bug() determines that it wasn't a BUG which caused the trap, it returns BUG_TRAP_TYPE_NONE. Some architectures (powerpc) implement WARN using the same mechanism; if the illegal instruction was the result of a WARN, then report_bug(Q) returns CONFIG_DEBUG_BUGVERBOSE; otherwise it returns BUG_TRAP_TYPE_BUG. lib/bug.c keeps a list of loaded modules which can be searched for __bug_table entries. The architecture must call module_bug_finalize()/module_bug_cleanup() from its corresponding module_finalize/cleanup functions. Unsetting CONFIG_DEBUG_BUGVERBOSE will reduce the kernel size by some amount. At the very least, filename and line information will not be recorded for each but, but architectures may decide to store no extra information per BUG at all. Unfortunately, gcc doesn't have a general way to mark an asm() as noreturn, so architectures will generally have to include an infinite loop (or similar) in the BUG code, so that gcc knows execution won't continue beyond that point. gcc does have a __builtin_trap() operator which may be useful to achieve the same effect, unfortunately it cannot be used to actually implement the BUG itself, because there's no way to get the instruction's address for use in generating the __bug_table entry. [randy.dunlap@oracle.com: Handle BUG=n, GENERIC_BUG=n to prevent build errors] [bunk@stusta.de: include/linux/bug.h must always #include <linux/module.h] Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andi Kleen <ak@muc.de> Cc: Hugh Dickens <hugh@veritas.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds2006-12-071-8/+15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (156 commits) [PATCH] x86-64: Export smp_call_function_single [PATCH] i386: Clean up smp_tune_scheduling() [PATCH] unwinder: move .eh_frame to RODATA [PATCH] unwinder: fully support linker generated .eh_frame_hdr section [PATCH] x86-64: don't use set_irq_regs() [PATCH] x86-64: check vector in setup_ioapic_dest to verify if need setup_IO_APIC_irq [PATCH] x86-64: Make ix86 default to HIGHMEM4G instead of NOHIGHMEM [PATCH] i386: replace kmalloc+memset with kzalloc [PATCH] x86-64: remove remaining pc98 code [PATCH] x86-64: remove unused variable [PATCH] x86-64: Fix constraints in atomic_add_return() [PATCH] x86-64: fix asm constraints in i386 atomic_add_return [PATCH] x86-64: Correct documentation for bzImage protocol v2.05 [PATCH] x86-64: replace kmalloc+memset with kzalloc in MTRR code [PATCH] x86-64: Fix numaq build error [PATCH] x86-64: include/asm-x86_64/cpufeature.h isn't a userspace header [PATCH] unwinder: Add debugging output to the Dwarf2 unwinder [PATCH] x86-64: Clarify error message in GART code [PATCH] x86-64: Fix interrupt race in idle callback (3rd try) [PATCH] x86-64: Remove unwind stack pointer alignment forcing again ... Fixed conflict in include/linux/uaccess.h manually Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * [PATCH] unwinder: move .eh_frame to RODATAJan Beulich2006-12-071-5/+12
| | | | | | | | | | | | | | | | | | | | The .eh_frame section contents is never written to, so it can as well benefit from CONFIG_DEBUG_RODATA. Diff-ed against firstfloor tree. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
| * [PATCH] i386: Distinguish absolute symbolsVivek Goyal2006-12-071-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ld knows about 2 kinds of symbols, absolute and section relative. Section relative symbols symbols change value when a section is moved and absolute symbols do not. Currently in the linker script we have several labels marking the beginning and ending of sections that are outside of sections, making them absolute symbols. Having a mixture of absolute and section relative symbols refereing to the same data is currently harmless but it is confusing. This must be done carefully as newer revs of ld do not place symbols that appear in sections without data and instead ld makes those symbols global :( My ultimate goal is to build a relocatable kernel. The safest and least intrusive technique is to generate relocation entries so the kernel can be relocated at load time. The only penalty would be an increase in the size of the kernel binary. The problem is that if absolute and relocatable symbols are not properly specified absolute symbols will be relocated or section relative symbols won't be, which is fatal. The practical motivation is that when generating kernels that will run from a reserved area for analyzing what caused a kernel panic, it is simpler if you don't need to hard code the physical memory location they will run at, especially for the distributions. [AK: and merged:] o Also put a message so that in future people can be aware of it and avoid introducing absolute symbols. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
* | [PATCH] cleanup asm/setup.h userspace visibilityAdrian Bunk2006-12-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the contents of the userspace asm/setup.h header consistent on all architectures: - export setup.h to userspace on all architectures - export only COMMAND_LINE_SIZE to userspace - frv: move COMMAND_LINE_SIZE from param.h - i386: remove duplicate COMMAND_LINE_SIZE from param.h - arm: - export ATAGs to userspace - change u8/u16/u32 to __u8/__u16/__u32 Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] cleanup include/asm-generic/atomic.hAdrian Bunk2006-12-072-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | cleanup asm-generic/atomic.h - no longer a userspace header - remove the unneeded #include <asm/types.h> - #else/#endif comments [akpm@osdl.org: fix arm build] Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Pass struct dev pointer to dma_cache_sync()Ralf Baechle2006-12-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass struct dev pointer to dma_cache_sync() dma_cache_sync() is ill-designed in that it does not have a struct device pointer argument which makes proper support for systems that consist of a mix of coherent and non-coherent DMA devices hard. Change dma_cache_sync to take a struct device pointer as first argument and fix all its callers to pass it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Add struct dev pointer to dma_is_consistent()Ralf Baechle2006-12-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dma_is_consistent() is ill-designed in that it does not have a struct device pointer argument which makes proper support for systems that consist of a mix of coherent and non-coherent DMA devices hard. Change dma_is_consistent to take a struct device pointer as first argument and fix the sole caller to pass it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] mm: pagefault_{disable,enable}()Peter Zijlstra2006-12-071-2/+2
|/ | | | | | | | | | | | | | | | | | | | Introduce pagefault_{disable,enable}() and use these where previously we did manual preempt increments/decrements to make the pagefault handler do the atomic thing. Currently they still rely on the increased preempt count, but do not rely on the disabled preemption, this might go away in the future. (NOTE: the extra barrier() in pagefault_disable might fix some holes on machines which have too many registers for their own good) [heiko.carstens@de.ibm.com: s390 fix] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Nick Piggin <npiggin@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Driver core: add dev_archdata to struct deviceBenjamin Herrenschmidt2006-12-011-0/+12
| | | | | | | | | | | | | | Add arch specific dev_archdata to struct device Adds an arch specific struct dev_arch to struct device. This enables architecture to add specific fields to every device in the system, like DMA operation pointers, NUMA node ID, firmware specific data, etc... Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Andi Kleen <ak@suse.de> Acked-By: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Add "pure_initcall" for static variable initializationLinus Torvalds2006-11-201-0/+2
| | | | | | | | | | | | | | | | | | | | This is a quick hack to overcome the fact that SRCU currently does not allow static initializers, and we need to sometimes initialize those things before any other initializers (even "core" ones) can do so. Currently we don't allow this at all for modules, and the only user that needs is right now is cpufreq. As reported by Thomas Gleixner: "Commit b4dfdbb3c707474a2254c5b4d7e62be31a4b7da9 ("[PATCH] cpufreq: make the transition_notifier chain use SRCU breaks cpu frequency notification users, which register the callback > on core_init level." Cc: Thomas Gleixner <tglx@timesys.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Andrew Morton <akpm@osdl.org>, Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] drivers: wait for threaded probes between initcall levelsAndrew Morton2006-10-271-1/+8
| | | | | | | | | | | | | | | | | | The multithreaded-probing code has a problem: after one initcall level (eg, core_initcall) has been processed, we will then start processing the next level (postcore_initcall) while the kernel threads which are handling core_initcall are still executing. This breaks the guarantees which the layered initcalls previously gave us. IOW, we want to be multithreaded _within_ an initcall level, but not between different levels. Fix that up by causing the probing code to wait for all outstanding probes at one level to complete before we start processing the next level. Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] vmlinux.lds: consolidate initcall sectionsAndrew Morton2006-10-271-0/+10
| | | | | | | | | | | | | | Add a vmlinux.lds.h helper macro for defining the eight-level initcall table, teach all the architectures to use it. This is a prerequisite for a patch which performs initcall synchronisation for multithreaded-probing. Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> [ Added AVR32 as well ] Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86-64: Speed up dwarf2 unwinderJan Beulich2006-10-211-0/+16
| | | | | | | | | | | | | This changes the dwarf2 unwinder to do a binary search for CIEs instead of a linear work. The linker is unfortunately not able to build a proper lookup table at link time, instead it creates one at runtime as soon as the bootmem allocator is usable (so you'll continue using the linear lookup for the first [hopefully] few calls). The code should be ready to utilize a build-time created table once a fixed linker becomes available. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
* [PATCH] Fix warnings for WARN_ON if CONFIG_BUG is disabledRalf Baechle2006-10-201-1/+4
| | | | | | | | | | | | | | | | | | | In most cases the return value of WARN_ON() is ignored. If the generic definition for the !CONFIG_BUG case is used this will result in a warning: CC kernel/sched.o In file included from include/linux/bio.h:25, from include/linux/blkdev.h:14, from kernel/sched.c:39: include/linux/ioprio.h: In function ‘task_ioprio’: include/linux/ioprio.h:50: warning: statement with no effect kernel/sched.c: In function ‘context_switch’: kernel/sched.c:1834: warning: statement with no effect Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: likely profilingNick Piggin2006-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This likely profiling is pretty fun. I found a few possible problems in sched.c. This patch may be not measurable, but when I did measure long ago, nooping (un)likely cost a couple of % on scheduler heavy benchmarks, so it all adds up. Tweak some branch hints: - the 2nd 64 bits in the bitmask is likely to be populated, because it contains the first 28 bits (nearly 3/4) of the normal priorities. (ratio of 669669:691 ~= 1000:1). - it isn't unlikely that context switching switches to another process. it might be very rapidly switching to and from the idle process (ratio of 475815:419004 and 471330:423544). Let the branch predictor decide. - preempt_enable seems to be very often called in a nested preempt_disable or with interrupts disabled (ratio of 3567760:87965 ~= 40:1) Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Daniel Walker <dwalker@mvista.com> Cc: Hua Zhong <hzhong@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Fix typo in "syntax error if percpu macros are incorrectly used" patchJan Blunck2006-10-061-1/+1
| | | | | | | | | | | Trivial typo fix in the "syntax error if percpu macros are incorrectly used" patch. I misspelled "identifier" in all places. D'Oh! Thanks to Dirk Mueller to point this out. Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Fix WARN_ON / WARN_ON_ONCE regressionAndrew Morton2006-10-061-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | Tim and Ananiev report that the recent WARN_ON_ONCE changes cause increased cache misses with the tbench workload. Apparently due to the access to the newly-added static variable. Rearrange the code so that we don't touch that variable unless the warning is going to trigger. Also rework the logic so that the static variable starts out at zero, so we can move it into bss. It would seem logical to mark the static variable as __read_mostly too. But it would be wrong, because that would put it back into the vmlinux image, and the kernel will never read from this variable in normal operation anyway. Unless the compiler or hardware go and do some prefetching on us? For some reason this patch shrinks softirq.o text by 40 bytes. Cc: Tim Chen <tim.c.chen@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "Ananiev, Leonid I" <leonid.i.ananiev@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* fix file specification in commentsUwe Zeisberger2006-10-035-5/+5
| | | | | | | Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] paravirt: remove set pte atomicZachary Amsden2006-10-011-8/+0
| | | | | | | | | | | | | | | | | Now that ptep_establish has a definition in PAE i386 3-level paging code, the only paging model which is insane enough to have multi-word hardware PTEs which are not efficient to set atomically, we can remove the ghost of set_pte_atomic from other architectures which falesly duplicated it, and remove all knowledge of it from the generic pgtable code. set_pte_atomic is now a private pte operator which is specific to i386 Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] paravirt: lazy mmu mode hooks.patchZachary Amsden2006-10-011-0/+20
| | | | | | | | | | | | | | | | | | | | | | | Implement lazy MMU update hooks which are SMP safe for both direct and shadow page tables. The idea is that PTE updates and page invalidations while in lazy mode can be batched into a single hypercall. We use this in VMI for shadow page table synchronization, and it is a win. It also can be used by PPC and for direct page tables on Xen. For SMP, the enter / leave must happen under protection of the page table locks for page tables which are being modified. This is because otherwise, you end up with stale state in the batched hypercall, which other CPUs can race ahead of. Doing this under the protection of the locks guarantees the synchronization is correct, and also means that spurious faults which are generated during this window by remote CPUs are properly handled, as the page fault handler must re-check the PTE under protection of the same lock. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] paravirt: pte clear not presentZachary Amsden2006-10-011-2/+7
| | | | | | | | | | | | | | Change pte_clear_full to a more appropriately named pte_clear_not_present, allowing optimizations when not-present mapping changes need not be reflected in the hardware TLB for protected page table modes. There is also another case that can use it in the fremap code. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Let WARN_ON/WARN_ON_ONCE return the conditionHerbert Xu2006-09-291-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | Letting WARN_ON/WARN_ON_ONCE return the condition means that you could do if (WARN_ON(blah)) { handle_impossible_case } Rather than if (unlikely(blah)) { WARN_ON(1) handle_impossible_case } I checked all the newly added WARN_ON_ONCE users and none of them test the return status so we can still change it. [akpm@osdl.org: warning fix] [akpm@osdl.org: build fix] Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.1 at 2024-10-30 13:35:01 +0000