aboutsummaryrefslogtreecommitdiffstats
path: root/include/video
Commit message (Collapse)AuthorAgeFilesLines
* OMAPDSS: HDMI: PHY burnout fixTomi Valkeinen2012-03-121-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c49d005b6cc8491fad5b24f82805be2d6bcbd3dd upstream. A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board if the HDMI PHY is kept powered on when the cable is not connected. This patch solves the problem by adding hot-plug-detection into the HDMI IP driver. This is not a real HPD support in the sense that nobody else than the IP driver gets to know about the HPD events, but is only meant to fix the HW bug. The strategy is simple: If the display device is turned off by the user, the PHY power is set to OFF. When the display device is turned on by the user, the PHY power is set either to LDOON or TXON, depending on whether the HDMI cable is connected. The reason to avoid PHY OFF when the display device is on, but the cable is disconnected, is that when the PHY is turned OFF, the HDMI IP is not "ticking" and thus the DISPC does not receive pixel clock from the HDMI IP. This would, for example, prevent any VSYNCs from happening, and would thus affect the users of omapdss. By using LDOON when the cable is disconnected we'll avoid the HW bug, but keep the HDMI working as usual from the user's point of view. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
*-. Merge branches 'common/fbdev' and 'common/fbdev-meram' of ↵Paul Mundt2011-05-242-0/+71
|\ \ | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
| | * sh_mobile_meram: Add support for NV24 framebuffersDamian2011-05-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Since the NV24 framebuffer has a CbCr plane that is twice as wide as the Y plane, it needs to be handled as a special case. Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| | * sh_mobile_meram: MERAM framework for LCDCDamian2011-05-232-0/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the patch by Takanari Hayama <taki@igel.co.jp> Adds support framework necessary to use Media RAM (MERAM) caching functionality with the LCDC. The MERAM is accessed through up to 4 Interconnect Buffers (ICBs). ICB numbers and MERAM address ranges to use are specified in by filling in the .meram_cfg member of the LCDC platform data Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linuxPaul Mundt2011-05-243-0/+711
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | Conflicts: drivers/video/omap2/dss/dsi.c drivers/video/omap2/dss/dss_features.c drivers/video/omap2/dss/dss_features.h Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | OMAP: DSS2: Add support for NV12 formatAmber Jain2011-05-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the support for NV12 color format. Configure base address for UV component of NV12 color format. Change the way chroma scaling is handled for YUV formats on OMAP4 by enabling chroma-resampling for video pipeline and hence using FIR2 register set for scaling UV. Changes to _dispc_set_scaling(), because of the reason above, are: - call _dispc_set_scaling_common() to handle scaling for all color formats except for OMAP4 where it only handles scaling for RGB or Y-component - call _dispc_set_scaling_uv() for special handling required for UV component on OMAP4. - dispc_set_scaling_uv() also resets chroma-resampling bit for RGB color modes. Contains chroma scaling (_dispc_set_scaling_uv) design and implemented by Lajos Molnar <molnar@ti.com> Signed-off-by: Amber Jain <amber@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: Add new color formats for OMAP4Amber Jain2011-05-231-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add new color formats supported by OMAP4: NV12, RGBA16, RGBX16, ARGB16_1555, XRGB16_1555. NV12 color format is defined here, its support in DSS will be added separately. Signed-off-by: Amber Jain <amber@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: DSI: Get number of DSI data lanes using DSI_GNQ registerArchit Taneja2011-05-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On OMAP3, the DSI module has 2 data lanes. On OMAP4, DSI1 has 4 data lanes and DSI2 has 2 data lanes. Introduce function dsi_get_num_data_lanes() which returns the number of data lanes on the dsi interface, introduce function dsi_get_num_data_lanes_dssdev() which returns the number of data lanes used by the omap_dss_device connected to the lanes. Use the DSI_GNQ register on OMAP4 to get the number of data lanes, modify dsi.c to use the number of lanes and the extra data lanes on DSI1. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: RFBI: add omap_rfbi_configureTomi Valkeinen2011-05-121-0/+2
| | | | | | | | | | | | | | | | | | | | | Add omap_rfbi_configure() which the panel driver can use to reconfigure the data element size and the number of data lines in the RFBI bus. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: RFBI: add rfbi_bus_lockTomi Valkeinen2011-05-121-0/+2
| | | | | | | | | | | | | | | | | | | | | Add similar bus lock to RFBI as is in DSI. The panel driver can use the bus lock to mark that the RFBI bus is currently in use. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP4: DSS2: DSI: Changes for DSI2 on OMAP4Archit Taneja2011-05-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce DSI2 PLL clock sources needed by LCD2 channel and DSI2 Protocol engine and DISPC Functional clock. Do the following: - Modify dss_get_dsi_clk_source() and dss_select_dsi_clk_source() to take the dsi module number as an argument. - Create debugfs files for dsi2, split the corresponding debugfs functions. - Allow DPI to use these new clock sources. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: Pass platform_device as an argument in dsi functionsArchit Taneja2011-05-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DSI interface is represented as a platform device, using the DSI platform driver(dsi.c). The current DSI driver design is capable of running only one instance of a DSI device. On OMAP4, there are 2 very similar DSI modules which can be represented as instances of "omapdss_dsi" platform device. Add member "module" in "dssdev.phy.dsi" that tells us which DSI module's lanes the panel is connected to. Modify dsi.c functions to take the device's platform_device struct pointer, provide functions dsi_get_dsidev_from_dssdev() and dsi_get_dsidev_from_id() take the panel's omap_dss_device and module number respectively, and return the platform_device pointer. Currently, the dsi struct is declared globally and is accessed when dsi data is needed. The new pdev argument will be used later to provide the platform device's dsi related data. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: DSI: Add extra omap_dss_device argument in functions exported by dsiArchit Taneja2011-05-121-13/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add pointer to omap_dss_device struct as an argument in the functions which are exported to dsi panel drivers. This argument will tell the DSI driver which DSI interface's data it has to choose. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: Taal: Implement ULPS functionalityTomi Valkeinen2011-05-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ULPS is a low power state where the DSI lanes are kept at ground. This patch implements ULPS by having a DSI bus inactivity timer which triggers the entry to ULPS. ULPS exit will happen automatically when the driver needs to do something on the DSI lanes. The ulps_timeout is configurable from board file or via sysfs. Additionally another sysfs file, "ulps", can be used to check the current ULPS state, or to manually enter or exit ULPS. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: Taal: Implement configurable ESD intervalTomi Valkeinen2011-05-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | ESD check in Taal driver is currently on/off feature with hardcoded interval. This patch changes it to a configurable interval, which can be set from the board file. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: DSI: Add DSI pad muxing supportTomi Valkeinen2011-05-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Add dsi_mux_pads function pointer to omap_dss_board_info, and use the function pointer in DSI code to configure the DSI pads either to normal DSI operation, or to pull down when in ULPS. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: DSI: add parameter to enter ulps on disableTomi Valkeinen2011-05-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add parameter to omapdss_dsi_display_disable() which the panel driver can use to tell if the DSI lanes should be put to ULPS before disabling the interface. This can be used to skip ULPS entry in cases where the panel doesn't care about ULPS state, for example when the panel will be reset, or when the display interface will be enabled again right after the disable. This will speed up the operation considerably in cases where entering ULPS would fail with timeout, and the panel driver isn't even interested in entering ULPS. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: DSI: add option to leave DSI lanes powered onTomi Valkeinen2011-05-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DSI pins are powered by VDDS_DSI. If VDDS_DSI is off, the DSI pins are floating even if they are pinmuxed to, say, safe mode and there's a pull down/up. This patch gives the panel drivers an option to leave the VDDS_DSI power enabled while the DSS itself is turned off. This can be used to keep the DSI lanes in a valid state while DSS is off, if the DSI pins are muxed for pull down (not done in this patch). There will be a slight power consumption increase (~100 uA?) when the VDDS_DSI is left on, but because this option is used when the panel is left on, the regulator consumption is negligible compared to panel power consumption. When the panel is fully turned off the VDDS_DSI is also turned off. As an added bonus this will give us faster start up time when starting up the DSS and the regulator is already enabled. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: HDMI: Use dss_device clock configuration for HDMI PLL parametersArchit Taneja2011-05-111-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move some of the configurable HDMI PLL parameters to dssdev.clock struct. Cleanup the function hdmi_compute_pll() by using the parameters defined in the board file and do some cosmetic modifications. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP2PLUS: DSS2: Add clock sources to dss device clock configurationArchit Taneja2011-05-111-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add enum dss_clock_source in dssdev.clocks struct so that the clock sources can be specified in the board file. Replace hard coded clock sources in dsi.c, dpi.c and replace them with the new clock source members in dssdev.clocks. Modify the sdp4430_lcd_device struct in board-4430sdp.c to specify clock sources for DISPC_FCLK, LCD1_CLK and DSI1_FCLK. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP2PLUS: DSS2: Change enum "dss_clk_source" to "omap_dss_clk_source"Archit Taneja2011-05-111-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change enum dss_clk_source to omap_dss_clock_source and move it to 'plat/display.h'. Change the enum members to attach "OMAP_" in the beginning. These changes are done in order to specify the clock sources for DSS in the board file. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: make omap_dss_(un)register_device staticTomi Valkeinen2011-05-111-3/+0
| | | | | | | | | | | | | | | | | | | | | omap_dss_register_device and omap_dss_unregister_device can only be called from core.c, so we can make it static. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: Add method for querying display dimensions from DSS driversJani Nikula2011-05-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Add get_dimensions() to struct omap_dss_driver. Use the call, if supported by the driver, in OMAPFB. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: move dss device clock configurationTomi Valkeinen2011-05-111-12/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clock configuration was defined inside dssdev.phy.dsi struct. The clock config doesn't really belong there, and so it's moved to dssdev.clock struct. Now the explicit clock configuration could also be used for other interfaces than DSI, although there's no support for it currently. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: Move nokia-dsi-panel.h to include/video/Tomi Valkeinen2011-05-111-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | arch/arm/plat-omap/include/plat/nokia-dsi-panel.h is an include for the OMAP DSS panel driver for Nokia's DSI displays. A more logical place for it is in include/video. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: Move panel-generic-dpi.h to include/video/Tomi Valkeinen2011-05-111-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | arch/arm/plat-omap/include/plat/panel-generic-dpi.h is an include for the OMAP DSS panel driver for generic DPI displays. A more logical place for it is in include/video. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP: DSS2: Move display.h to include/video/Tomi Valkeinen2011-05-111-0/+589
| |/ | | | | | | | | | | | | arch/arm/plat-omap/include/plat/display.h is an include for the OMAP DSS driver. A more logical place for it is in include/video. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | Merge branch 'master' into for-nextJiri Kosina2011-04-266-7/+8
|\ \ | |/ | | | | | | Fast-forwarded to current state of Linus' tree as there are patches to be applied for files that didn't exist on the old branch.
| * Fix common misspellingsLucas De Marchi2011-03-315-7/+7
| | | | | | | | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
| * atmel_lcdfb: implement inverted contrast pwmAndreas Bießmann2011-03-221-0/+1
| | | | | | | | | | | | | | | | This patch introduces lcdc->lcdcon_pol_negative which set CONTRAST_CTR register to inverted polarity. Signed-off-by: Andreas Bießmann <biessmann@corscience.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | update David Miller's old email addressJustin P. Mattock2011-04-061-1/+1
|/ | | | | | Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* fbdev: sh_mobile_lcdc: Add YUV framebuffer supportDamian Hobson-Garcia2011-03-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Supports YCbCr420sp, YCbCr422sp, and YCbCr44sp, formats (bpp = 12, 16, and 24) respectively. When double-buffering both Y planes appear before the C planes (Y-Y-C-C), as opposed to Y-C-Y-C. Set .nonstd in struct sh_mobile_lcdc_chan_cfg to enable YUV mode, and use .bpp to distiguish between the 3 modes. The value of .nonstd is copied to bits 16-31 of LDDFR in the LCDC and should be set accordingly. .nonstd must be set to 0 for RGB mode. Due to the encoding of YUV data, the framebuffer will clear to green instead of black. In YUV 420 mode, panning is only possible in 2 line increments. Additionally in YUV 420 mode the vertical resolution of the framebuffer must be an even number. Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* fbdev: sh_mobile_lcdcfb: add backlight supportAlexandre Courbot2011-03-101-0/+9
| | | | | | | | | Support for backlight devices controlled through board-specific routines. Backlights can be defined per-channel and follow fbdev directives to switch off as the LCD blanks or is turned on/off. Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* Merge branch 'fbdev/udlfb'Paul Mundt2011-01-061-0/+95
|\
| * video: udlfb: Kill off special printk wrappers, use pr_fmt().Paul Mundt2011-01-061-16/+0
| | | | | | | | | | | | | | This kills off all of the dl_xxx() printk wrappers and simply stubs in a pr_fmt() definition to accomplish the same thing. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * video: udlfb: Kill off some magic constants for EDID sizing.Paul Mundt2011-01-061-6/+0
| | | | | | | | | | | | The edid length is fixed, so use the standard definition consistently. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * fbdev: move udlfb out of staging.Paul Mundt2010-11-161-0/+117
| | | | | | | | | | | | | | | | | | | | | | | | | | udlfb has undergone a fair bit of cleanup recently and is effectively at the point where it can be liberated from staging purgatory and promoted to a real driver. The outstanding cleanups are all minor, with some of them dependent on drivers/video headers, so these will be done incrementally from udlfb's new home. Requested-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | Merge branch 'common/fbdev-mipi' of ↵Paul Mundt2011-01-051-0/+6
|\ \ | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
| * | fbdev: sh_mipi_dsi: support different register layoutsGuennadi Liakhovetski2011-01-051-0/+6
| |/ | | | | | | | | | | | | | | The register layout of the MIPI DSI unit on sh-mobile SoCs differ. Add platform parameters to support such variations. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | Merge branch 'master' of ↵Paul Mundt2010-12-221-1/+0
|\ \ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
| * | fbdev: da8xx: punt duplicated FBIO_WAITFORVSYNC defineMike Frysinger2010-11-161-1/+0
| |/ | | | | | | | | | | | | | | This is already defined by linux/fb.h now, so punt the duplicate definition from the driver header. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | s1d13xxxfb: drop unused codeAndres Salomon2010-12-211-6/+0
| | | | | | | | | | | | | | | | | | | | | | Silence warnings such as - drivers/video/s1d13xxxfb.c:421: warning: ‘bltbit_wait_bitset’ defined but not used Just drop the unused code. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | fbdev: sh_mobile_hdmi: add support for more precise HDMI clock configurationGuennadi Liakhovetski2010-11-101-0/+3
|/ | | | | | | | | | | The HDMI clock has to be reconfigured for different video modes. However, the precision of the supplying SoC clock on SH-Mobile systems is often insufficient. This patch allows to additionally reconfigure the parent clock to achieve the optimal HDMI clock frequency, in case this is supported by the platform. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6 into ↵Russell King2010-10-281-1/+4
|\ | | | | | | | | | | | | devel-stable Conflicts: drivers/video/sh_mobile_hdmi.c
| * fbdev: sh_mobile_hdmi: implement lockingGuennadi Liakhovetski2010-09-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The SH-Mobile HDMI driver runs in several contexts: ISR, delayed work-queue, task context, when called from the sh_mobile_lcdc framebuffer driver. This creates ample race possibilities. Even though most these races are purely theoretical, it is better to close them. To trace fb_info validity we install a notification callback in the HDMI driver, and the only way for it to get to driver internal data is by using struct sh_mobile_lcdc_chan, therefore it had to be extracted into a separate common header. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * fbdev: sh_mobile_lcdcfb: Support multiple video modes in platform dataGuennadi Liakhovetski2010-09-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | This is a preparation for HDMI hotplug support. This patch just moves all platform defined video modes for the sh_mobile_lcdcfb driver to separate arrays and switches all users to use element 0 of that array, so, this patch doesn't introduce any functional changes and as such should not cause any regressions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2010-10-251-0/+16
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits) ALSA: hda - Disable sticky PCM stream assignment for AD codecs ALSA: usb - Creative USB X-Fi volume knob support ALSA: ca0106: Use card specific dac id for mute controls. ALSA: ca0106: Allow different sound cards to use different SPI channel mappings. ALSA: ca0106: Create a nice spot for mapping channels to dacs. ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence. ALSA: ca0106: Pull out dac powering routine into separate function. ALSA: ca0106 - add Sound Blaster 5.1vx info. ASoC: tlv320dac33: Use usleep_range for delays ALSA: usb-audio: add Novation Launchpad support ALSA: hda - Add workarounds for CT-IBG controllers ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs ASoC: tpa6130a2: Error handling for broken chip ASoC: max98088: Staticise m98088_eq_band ASoC: soc-core: Fix codec->name memory leak ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066 ALSA: hda - Add some workarounds for Creative IBG ALSA: hda - Fix wrong SPDIF NID assignment for CA0110 ALSA: hda - Fix codec rename rules for ALC662-compatible codecs ALSA: hda - Add alc_init_jacks() call to other codecs ...
| * | fbdev: sh_mobile_hdmi: modify flags name to more specificKuninori Morimoto2010-09-101-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch solve below report from Guennadi 1) > +/* Audio source select */ > +#define HDMI_SRC_MASK (0xF << 0) > +#define HDMI_SRC_I2S (0 << 0) /* default */ > +#define HDMI_SRC_SPDIF (1 << 0) > +#define HDMI_SRC_DSD (2 << 0) > +#define HDMI_SRC_HBR (3 << 0) I would be more specific with these macro names, i.e., include "AUDIO" or "SND" or something similar in them, e.g., HDMI_AUDIO_SRC_I2S. 2) > + case HDMI_SRC_I2S: > + data = (0x0 << 3); > + break; > + case HDMI_SRC_SPDIF: > + data = (0x1 << 3); > + break; > + case HDMI_SRC_DSD: > + data = (0x2 << 3); > + break; > + case HDMI_SRC_HBR: > + data = (0x3 << 3); In all above cases parenthesis are superfluous. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | fbdev: sh-mobile: Add HDMI sound type selectionKuninori Morimoto2010-09-011-0/+16
| |/ | | | | | | | | | | Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | Merge branch 'for-next' of ↵Linus Torvalds2010-10-241-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c