aboutsummaryrefslogtreecommitdiffstats
path: root/kernel/trace
Commit message (Collapse)AuthorAgeFilesLines
* splice: fix racy pipe->buffers usesEric Dumazet2013-10-051-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 047fe3605235888f3ebcda0c728cb31937eadfe6 upstream. Dave Jones reported a kernel BUG at mm/slub.c:3474! triggered by splice_shrink_spd() called from vmsplice_to_pipe() commit 35f3d14dbbc5 (pipe: add support for shrinking and growing pipes) added capability to adjust pipe->buffers. Problem is some paths don't hold pipe mutex and assume pipe->buffers doesn't change for their duration. Fix this by adding nr_pages_max field in struct splice_pipe_desc, and use it in place of pipe->buffers where appropriate. splice_shrink_spd() loses its struct pipe_inode_info argument. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Tom Herbert <therbert@google.com> Cc: stable <stable@vger.kernel.org> # 2.6.35 Tested-by: Dave Jones <davej@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Fix fields of struct trace_iterator that are zeroed by mistakeAndrew Vagin2013-08-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit ed5467da0e369e65b247b99eb6403cb79172bcda upstream. tracing_read_pipe zeros all fields bellow "seq". The declaration contains a comment about that, but it doesn't help. The first field is "snapshot", it's true when current open file is snapshot. Looks obvious, that it should not be zeroed. The second field is "started". It was converted from cpumask_t to cpumask_var_t (v2.6.28-4983-g4462344), in other words it was converted from cpumask to pointer on cpumask. Currently the reference on "started" memory is lost after the first read from tracing_read_pipe and a proper object will never be freed. The "started" is never dereferenced for trace_pipe, because trace_pipe can't have the TRACE_FILE_ANNOTATE options. Link: http://lkml.kernel.org/r/1375463803-3085183-1-git-send-email-avagin@openvz.org Signed-off-by: Andrew Vagin <avagin@openvz.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Fix irqs-off tag display in syscall tracingzhangwei(Jovi)2013-08-041-0/+3
| | | | | | | | | | commit 11034ae9c20f4057a6127fc965906417978e69b2 upstream Initialization of variable irq_flags and pc was missed when backport 11034ae9c to linux-3.0.y and linux-3.4.y, my fault. Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Fix irqs-off tag display in syscall tracingzhangwei(Jovi)2013-07-281-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 11034ae9c20f4057a6127fc965906417978e69b2 upstream. All syscall tracing irqs-off tags are wrong, the syscall enter entry doesn't disable irqs. [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event [root@jovi tracing]# cat trace # tracer: nop # # entries-in-buffer/entries-written: 13/13 #P:2 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | irqbalance-513 [000] d... 56115.496766: sys_open(filename: 804e1a6, flags: 0, mode: 1b6) irqbalance-513 [000] d... 56115.497008: sys_open(filename: 804e1bb, flags: 0, mode: 1b6) sendmail-771 [000] d... 56115.827982: sys_open(filename: b770e6d1, flags: 0, mode: 1b6) The reason is syscall tracing doesn't record irq_flags into buffer. The proper display is: [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event [root@jovi tracing]# cat trace # tracer: nop # # entries-in-buffer/entries-written: 14/14 #P:2 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | irqbalance-514 [001] .... 46.213921: sys_open(filename: 804e1a6, flags: 0, mode: 1b6) irqbalance-514 [001] .... 46.214160: sys_open(filename: 804e1bb, flags: 0, mode: 1b6) <...>-920 [001] .... 47.307260: sys_open(filename: 4e82a0c5, flags: 80000, mode: 0) Link: http://lkml.kernel.org/r/1365564393-10972-3-git-send-email-jovi.zhangwei@huawei.com Cc: stable@vger.kernel.org # 2.6.35 Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Use current_uid() for critical time tracingSteven Rostedt (Red Hat)2013-07-281-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f17a5194859a82afe4164e938b92035b86c55794 upstream. The irqsoff tracer records the max time that interrupts are disabled. There are hooks in the assembly code that calls back into the tracer when interrupts are disabled or enabled. When they are enabled, the tracer checks if the amount of time they were disabled is larger than the previous recorded max interrupts off time. If it is, it creates a snapshot of the currently running trace to store where the last largest interrupts off time was held and how it happened. During testing, this RCU lockdep dump appeared: [ 1257.829021] =============================== [ 1257.829021] [ INFO: suspicious RCU usage. ] [ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G W [ 1257.829021] ------------------------------- [ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle! [ 1257.829021] [ 1257.829021] other info that might help us debug this: [ 1257.829021] [ 1257.829021] [ 1257.829021] RCU used illegally from idle CPU! [ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0 [ 1257.829021] RCU used illegally from extended quiescent state! [ 1257.829021] 2 locks held by trace-cmd/4831: [ 1257.829021] #0: (max_trace_lock){......}, at: [<ffffffff810e2b77>] stop_critical_timing+0x1a3/0x209 [ 1257.829021] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff810dae5a>] __update_max_tr+0x88/0x1ee [ 1257.829021] [ 1257.829021] stack backtrace: [ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G W 3.10.0-rc1-test+ #171 [ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 [ 1257.829021] 0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8 [ 1257.829021] ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003 [ 1257.829021] ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a [ 1257.829021] Call Trace: [ 1257.829021] [<ffffffff8153dd2b>] dump_stack+0x19/0x1b [ 1257.829021] [<ffffffff81092a00>] lockdep_rcu_suspicious+0x109/0x112 [ 1257.829021] [<ffffffff810daebf>] __update_max_tr+0xed/0x1ee [ 1257.829021] [<ffffffff810dae5a>] ? __update_max_tr+0x88/0x1ee [ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107 [ 1257.829021] [<ffffffff810dbf85>] update_max_tr_single+0x11d/0x12d [ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107 [ 1257.829021] [<ffffffff810e2b15>] stop_critical_timing+0x141/0x209 [ 1257.829021] [<ffffffff8109569a>] ? trace_hardirqs_on+0xd/0xf [ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107 [ 1257.829021] [<ffffffff810e3057>] time_hardirqs_on+0x2a/0x2f [ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107 [ 1257.829021] [<ffffffff8109550c>] trace_hardirqs_on_caller+0x16/0x197 [ 1257.829021] [<ffffffff8109569a>] trace_hardirqs_on+0xd/0xf [ 1257.829021] [<ffffffff811002b9>] user_enter+0xfd/0x107 [ 1257.829021] [<ffffffff810029b4>] do_notify_resume+0x92/0x97 [ 1257.829021] [<ffffffff8154bdca>] int_signal+0x12/0x17 What happened was entering into the user code, the interrupts were enabled and a max interrupts off was recorded. The trace buffer was saved along with various information about the task: comm, pid, uid, priority, etc. The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock() to retrieve the data, and this happened to happen where RCU is blind (user_enter). As only the preempt and irqs off tracers can have this happen, and they both only have the tsk == current, if tsk == current, use current_uid() instead of task_uid(), as current_uid() does not use RCU as only current can change its uid. This fixes the RCU suspicious splat. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE sectionSteven Rostedt2013-06-131-13/+13
| | | | | | | | | | | | | | commit 7f49ef69db6bbf756c0abca7e9b65b32e999eec8 upstream. As ftrace_filter_lseek is now used with ftrace_pid_fops, it needs to be moved out of the #ifdef CONFIG_DYNAMIC_FTRACE section as the ftrace_pid_fops is defined when DYNAMIC_FTRACE is not. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Namhyung Kim <namhyung@kernel.org> [ lizf: adjust context ] Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Fix possible NULL pointer dereferencesNamhyung Kim2013-06-131-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6a76f8c0ab19f215af2a3442870eeb5f0e81998d upstream. Currently set_ftrace_pid and set_graph_function files use seq_lseek for their fops. However seq_open() is called only for FMODE_READ in the fops->open() so that if an user tries to seek one of those file when she open it for writing, it sees NULL seq_file and then panic. It can be easily reproduced with following command: $ cd /sys/kernel/debug/tracing $ echo 1234 | sudo tee -a set_ftrace_pid In this example, GNU coreutils' tee opens the file with fopen(, "a") and then the fopen() internally calls lseek(). Link: http://lkml.kernel.org/r/1365663302-2170-1-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> [ lizf: adjust context ] Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Fix ftrace_dump()Steven Rostedt (Red Hat)2013-05-112-34/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7fe70b579c9e3daba71635e31b6189394e7b79d3 upstream. ftrace_dump() had a lot of issues. What ftrace_dump() does, is when ftrace_dump_on_oops is set (via a kernel parameter or sysctl), it will dump out the ftrace buffers to the console when either a oops, panic, or a sysrq-z occurs. This was written a long time ago when ftrace was fragile to recursion. But it wasn't written well even for that. There's a possible deadlock that can occur if a ftrace_dump() is happening and an NMI triggers another dump. This is because it grabs a lock before checking if the dump ran. It also totally disables ftrace, and tracing for no good reasons. As the ring_buffer now checks if it is read via a oops or NMI, where there's a chance that the buffer gets corrupted, it will disable itself. No need to have ftrace_dump() do the same. ftrace_dump() is now cleaned up where it uses an atomic counter to make sure only one dump happens at a time. A simple atomic_inc_return() is enough that is needed for both other CPUs and NMIs. No need for a spinlock, as if one CPU is running the dump, no other CPU needs to do it too. The tracing_on variable is turned off and not turned on. The original code did this, but it wasn't pretty. By just disabling this variable we get the result of not seeing traces that happen between crashes. For sysrq-z, it doesn't get turned on, but the user can always write a '1' to the tracing_on file. If they are using sysrq-z, then they should know about tracing_on. The new code is much easier to read and less error prone. No more deadlock possibility when an NMI triggers here. Reported-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Reset ftrace_graph_filter_enabled if count is zeroNamhyung Kim2013-05-071-1/+2
| | | | | | | | | | | | | | | | | commit 9f50afccfdc15d95d7331acddcb0f7703df089ae upstream. The ftrace_graph_count can be decreased with a "!" pattern, so that the enabled flag should be updated too. Link: http://lkml.kernel.org/r/1365663698-2413-1-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Check return value of tracing_init_dentry()Namhyung Kim2013-05-073-0/+6
| | | | | | | | | | | | | | | commit ed6f1c996bfe4b6e520cf7a74b51cd6988d84420 upstream. Check return value and bail out if it's NULL. Link: http://lkml.kernel.org/r/1365553093-10180-2-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Fix off-by-one on allocating stat->pagesNamhyung Kim2013-05-071-1/+1
| | | | | | | | | | | | | | | commit 39e30cd1537937d3c00ef87e865324e981434e5b upstream. The first page was allocated separately, so no need to start from 0. Link: http://lkml.kernel.org/r/1364820385-32027-2-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Remove most or all of stack tracer stack size from stack_max_sizeSteven Rostedt (Red Hat)2013-05-071-21/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4df297129f622bdc18935c856f42b9ddd18f9f28 upstream. Currently, the depth reported in the stack tracer stack_trace file does not match the stack_max_size file. This is because the stack_max_size includes the overhead of stack tracer itself while the depth does not. The first time a max is triggered, a calculation is not performed that figures out the overhead of the stack tracer and subtracts it from the stack_max_size variable. The overhead is stored and is subtracted from the reported stack size for comparing for a new max. Now the stack_max_size corresponds to the reported depth: # cat stack_max_size 4640 # cat stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 4640 32 _raw_spin_lock+0x18/0x24 1) 4608 112 ____cache_alloc+0xb7/0x22d 2) 4496 80 kmem_cache_alloc+0x63/0x12f 3) 4416 16 mempool_alloc_slab+0x15/0x17 [...] While testing against and older gcc on x86 that uses mcount instead of fentry, I found that pasing in ip + MCOUNT_INSN_SIZE let the stack trace show one more function deep which was missing before. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Fix stack tracer with fentry useSteven Rostedt (Red Hat)2013-05-071-4/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d4ecbfc49b4b1d4b597fb5ba9e4fa25d62f105c5 upstream. When gcc 4.6 on x86 is used, the function tracer will use the new option -mfentry which does a call to "fentry" at every function instead of "mcount". The significance of this is that fentry is called as the first operation of the function instead of the mcount usage of being called after the stack. This causes the stack tracer to show some bogus results for the size of the last function traced, as well as showing "ftrace_call" instead of the function. This is due to the stack frame not being set up by the function that is about to be traced. # cat stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 4824 216 ftrace_call+0x5/0x2f 1) 4608 112 ____cache_alloc+0xb7/0x22d 2) 4496 80 kmem_cache_alloc+0x63/0x12f The 216 size for ftrace_call includes both the ftrace_call stack (which includes the saving of registers it does), as well as the stack size of the parent. To fix this, if CC_USING_FENTRY is defined, then the stack_tracer will reserve the first item in stack_dump_trace[] array when calling save_stack_trace(), and it will fill it in with the parent ip. Then the code will look for the parent pointer on the stack and give the real size of the parent's stack pointer: # cat stack_trace Depth Size Location (14 entries) ----- ---- -------- 0) 2640 48 update_group_power+0x26/0x187 1) 2592 224 update_sd_lb_stats+0x2a5/0x4ac 2) 2368 160 find_busiest_group+0x31/0x1f1 3) 2208 256 load_balance+0xd9/0x662 I'm Cc'ing stable, although it's not urgent, as it only shows bogus size for item #0, the rest of the trace is legit. It should still be corrected in previous stable releases. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Use stack of calling function for stack tracerSteven Rostedt (Red Hat)2013-05-071-5/+7
| | | | | | | | | | | | | | commit 87889501d0adfae10e3b0f0e6f2d7536eed9ae84 upstream. Use the stack of stack_trace_call() instead of check_stack() as the test pointer for max stack size. It makes it a bit cleaner and a little more accurate. Adding stable, as a later fix depends on this patch. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Fix double free when function profile init failedNamhyung Kim2013-04-161-1/+0
| | | | | | | | | | | | | | | | commit 83e03b3fe4daffdebbb42151d5410d730ae50bd1 upstream. On the failure path, stat->start and stat->pages will refer same page. So it'll attempt to free the same page again and get kernel panic. Link: http://lkml.kernel.org/r/1364820385-32027-1-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ftrace: Consistently restore trace function on sysctl enablingJan Kiszka2013-04-121-6/+2
| | | | | | | | | | | | | | | commit 5000c418840b309251c5887f0b56503aae30f84c upstream. If we reenable ftrace via syctl, we currently set ftrace_trace_function based on the previous simplistic algorithm. This is inconsistent with what update_ftrace_function does. So better call that helper instead. Link: http://lkml.kernel.org/r/5151D26F.1070702@siemens.com Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Prevent buffer overwrite disabled for latency tracersSteven Rostedt (Red Hat)2013-04-054-16/+63
| | | | | | | | | | | | | | | | | | | | | | commit 613f04a0f51e6e68ac6fe571ab79da3c0a5eb4da upstream. The latency tracers require the buffers to be in overwrite mode, otherwise they get screwed up. Force the buffers to stay in overwrite mode when latency tracers are enabled. Added a flag_changed() method to the tracer structure to allow the tracers to see what flags are being changed, and also be able to prevent the change from happing. [Backported for 3.4-stable. Re-added current_trace NULL checks; removed allocated_snapshot field; adapted to tracing_trace_options_write without trace_set_options.] Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Lingzhu Xiang <lxiang@redhat.com> Reviewed-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Protect tracer flags with trace_types_lockSteven Rostedt (Red Hat)2013-04-051-7/+12
| | | | | | | | | | | | | | | | | | | | commit 69d34da2984c95b33ea21518227e1f9470f11d95 upstream. Seems that the tracer flags have never been protected from synchronous writes. Luckily, admins don't usually modify the tracing flags via two different tasks. But if scripts were to be used to modify them, then they could get corrupted. Move the trace_types_lock that protects against tracers changing to also protect the flags being set. [Backported for 3.4, 3.0-stable. Moved return to after unlock.] Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Lingzhu Xiang <lxiang@redhat.com> Reviewed-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Fix free of probe entry by calling call_rcu_sched()Steven Rostedt (Red Hat)2013-03-281-2/+2
| | | | | | | | | | | | | | | | | | | | commit 740466bc89ad8bd5afcc8de220f715f62b21e365 upstream. Because function tracing is very invasive, and can even trace calls to rcu_read_lock(), RCU access in function tracing is done with preempt_disable_notrace(). This requires a synchronize_sched() for updates and not a synchronize_rcu(). Function probes (traceon, traceoff, etc) must be freed after a synchronize_sched() after its entry has been removed from the hash. But call_rcu() is used. Fix this by using call_rcu_sched(). Also fix the usage to use hlist_del_rcu() instead of hlist_del(). Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Fix race in snapshot swappingSteven Rostedt (Red Hat)2013-03-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | commit 2721e72dd10f71a3ba90f59781becf02638aa0d9 upstream. Although the swap is wrapped with a spin_lock, the assignment of the temp buffer used to swap is not within that lock. It needs to be moved into that lock, otherwise two swaps happening on two different CPUs, can end up using the wrong temp buffer to assign in the swap. Luckily, all current callers of the swap function appear to have their own locks. But in case something is added that allows two different callers to call the swap, then there's a chance that this race can trigger and corrupt the buffers. New code is coming soon that will allow for this race to trigger. I've Cc'd stable, so this bug will not show up if someone backports one of the changes that can trigger this bug. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ftrace: Update the kconfig for DYNAMIC_FTRACESteven Rostedt2013-03-141-10/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | commit db05021d49a994ee40a9735d9c3cb0060c9babb8 upstream. The prompt to enable DYNAMIC_FTRACE (the ability to nop and enable function tracing at run time) had a confusing statement: "enable/disable ftrace tracepoints dynamically" This was written before tracepoints were added to the kernel, but now that tracepoints have been added, this is very confusing and has confused people enough to give wrong information during presentations. Not only that, I looked at the help text, and it still references that dreaded daemon that use to wake up once a second to update the nop locations and brick NICs, that hasn't been around for over five years. Time to bring the text up to the current decade. Reported-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ftrace: Call ftrace cleanup module notifier after all other notifiersSteven Rostedt (Red Hat)2013-03-041-14/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8c189ea64eea01ca20d102ddb74d6936dd16c579 upstream. Commit: c1bf08ac "ftrace: Be first to run code modification on modules" changed ftrace module notifier's priority to INT_MAX in order to process the ftrace nops before anything else could touch them (namely kprobes). This was the correct thing to do. Unfortunately, the ftrace module notifier also contains the ftrace clean up code. As opposed to the set up code, this code should be run *after* all the module notifiers have run in case a module is doing correct clean-up and unregisters its ftrace hooks. Basically, ftrace needs to do clean up on module removal, as it needs to know about code being removed so that it doesn't try to modify that code. But after it removes the module from its records, if a ftrace user tries to remove a probe, that removal will fail due as the record of that code segment no longer exists. Nothing really bad happens if the probe removal is called after ftrace did the clean up, but the ftrace removal function will return an error. Correct code (such as kprobes) will produce a WARN_ON() if it fails to remove the probe. As people get annoyed by frivolous warnings, it's best to do the ftrace clean up after everything else. By splitting the ftrace_module_notifier into two notifiers, one that does the module load setup that is run at high priority, and the other that is called for module clean up that is run at low priority, the problem is solved. Reported-by: Frank Ch. Eigler <fche@redhat.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ftrace: Be first to run code modification on modulesSteven Rostedt2013-01-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c1bf08ac26e92122faab9f6c32ea8aba94612dae upstream. If some other kernel subsystem has a module notifier, and adds a kprobe to a ftrace mcount point (now that kprobes work on ftrace points), when the ftrace notifier runs it will fail and disable ftrace, as well as kprobes that are attached to ftrace points. Here's the error: WARNING: at kernel/trace/ftrace.c:1618 ftrace_bug+0x239/0x280() Hardware name: Bochs Modules linked in: fat(+) stap_56d28a51b3fe546293ca0700b10bcb29__8059(F) nfsv4 auth_rpcgss nfs dns_resolver fscache xt_nat iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack lockd sunrpc ppdev parport_pc parport microcode virtio_net i2c_piix4 drm_kms_helper ttm drm i2c_core [last unloaded: bid_shared] Pid: 8068, comm: modprobe Tainted: GF 3.7.0-0.rc8.git0.1.fc19.x86_64 #1 Call Trace: [<ffffffff8105e70f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff81134106>] ? __probe_kernel_read+0x46/0x70 [<ffffffffa0180000>] ? 0xffffffffa017ffff [<ffffffffa0180000>] ? 0xffffffffa017ffff [<ffffffff8105e76a>] warn_slowpath_null+0x1a/0x20 [<ffffffff810fd189>] ftrace_bug+0x239/0x280 [<ffffffff810fd626>] ftrace_process_locs+0x376/0x520 [<ffffffff810fefb7>] ftrace_module_notify+0x47/0x50 [<ffffffff8163912d>] notifier_call_chain+0x4d/0x70 [<ffffffff810882f8>] __blocking_notifier_call_chain+0x58/0x80 [<ffffffff81088336>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff810c2a23>] sys_init_module+0x73/0x220 [<ffffffff8163d719>] system_call_fastpath+0x16/0x1b ---[ end trace 9ef46351e53bbf80 ]--- ftrace failed to modify [<ffffffffa0180000>] init_once+0x0/0x20 [fat] actual: cc:bb:d2:4b:e1 A kprobe was added to the init_once() function in the fat module on load. But this happened before ftrace could have touched the code. As ftrace didn't run yet, the kprobe system had no idea it was a ftrace point and simply added a breakpoint to the code (0xcc in the cc:bb:d2:4b:e1). Then when ftrace went to modify the location from a call to mcount/fentry into a nop, it didn't see a call op, but instead it saw the breakpoint op and not knowing what to do with it, ftrace shut itself down. The solution is to simply give the ftrace module notifier the max priority. This should have been done regardless, as the core code ftrace modification also happens very early on in boot up. This makes the module modification closer to core modification. Link: http://lkml.kernel.org/r/20130107140333.593683061@goodmis.org Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reported-by: Frank Ch. Eigler <fche@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* ring-buffer: Fix race between integrity check and readersSteven Rostedt2013-01-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 9366c1ba13fbc41bdb57702e75ca4382f209c82f upstream. The function rb_check_pages() was added to make sure the ring buffer's pages were sane. This check is done when the ring buffer size is modified as well as when the iterator is released (closing the "trace" file), as that was considered a non fast path and a good place to do a sanity check. The problem is that the check does not have any locks around it. If one process were to read the trace file, and another were to read the raw binary file, the check could happen while the reader is reading the file. The issues with this is that the check requires to clear the HEAD page before doing the full check and it restores it afterward. But readers require the HEAD page to exist before it can read the buffer, otherwise it gives a nasty warning and disables the buffer. By adding the reader lock around the check, this keeps the race from happening. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ftrace: Clear bits properly in reset_iter_read()Dan Carpenter2012-12-171-1/+1
| | | | | | | | | | | | | | | | commit 70f77b3f7ec010ff9624c1f2e39a81babc9e2429 upstream. There is a typo here where '&' is used instead of '|' and it turns the statement into a noop. The original code is equivalent to: iter->flags &= ~((1 << 2) & (1 << 4)); Link: http://lkml.kernel.org/r/20120609161027.GD6488@elgon.mountain Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: change CPU ring buffer state from tracing_cpumaskVaibhav Nagarnaik2012-07-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 71babb2705e2203a64c27ede13ae3508a0d2c16c upstream. According to Documentation/trace/ftrace.txt: tracing_cpumask: This is a mask that lets the user only trace on specified CPUS. The format is a hex string representing the CPUS. The tracing_cpumask currently doesn't affect the tracing state of per-CPU ring buffers. This patch enables/disables CPU recording as its corresponding bit in tracing_cpumask is set/unset. Link: http://lkml.kernel.org/r/1336096792-25373-3-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: Fix ftrace stack trace entriesWolfgang Mauerer2012-04-132-5/+13
| | | | | | | | | | | | | | commit 01de982abf8c9e10fc3089e10585cd2cc914bdab upstream. 8 hex characters tell only half the tale for 64 bit CPUs, so use the appropriate length. Link: http://lkml.kernel.org/r/1332411501-8059-2-git-send-email-wolfgang.mauerer@siemens.com Signed-off-by: Wolfgang Mauerer <wolfgang.mauerer@siemens.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ftrace: Fix unregister ftrace_ops accountingJiri Olsa2012-02-031-14/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 30fb6aa74011dcf595f306ca2727254d708b786e upstream. Multiple users of the function tracer can register their functions with the ftrace_ops structure. The accounting within ftrace will update the counter on each function record that is being traced. When the ftrace_ops filtering adds or removes functions, the function records will be updated accordingly if the ftrace_ops is still registered. When a ftrace_ops is removed, the counter of the function records, that the ftrace_ops traces, are decremented. When they reach zero the functions that they represent are modified to stop calling the mcount code. When changes are made, the code is updated via stop_machine() with a command passed to the function to tell it what to do. There is an ENABLE and DISABLE command that tells the called function to enable or disable the functions. But the ENABLE is really a misnomer as it should just update the records, as records that have been enabled and now have a count of zero should be disabled. The DISABLE command is used to disable all functions regardless of their counter values. This is the big off switch and is not the complement of the ENABLE command. To make matters worse, when a ftrace_ops is unregistered and there is another ftrace_ops registered, neither the DISABLE nor the ENABLE command are set when calling into the stop_machine() function and the records will not be updated to match their counter. A command is passed to that function that will update the mcount code to call the registered callback directly if it is the only one left. This means that the ftrace_ops that is still registered will have its callback called by all functions that have been set for it as well as the ftrace_ops that was just unregistered. Here's a way to trigger this bug. Compile the kernel with CONFIG_FUNCTION_PROFILER set and with CONFIG_FUNCTION_GRAPH not set: CONFIG_FUNCTION_PROFILER=y # CONFIG_FUNCTION_GRAPH is not set This will force the function profiler to use the function tracer instead of the function graph tracer. # cd /sys/kernel/debug/tracing # echo schedule > set_ftrace_filter # echo function > current_tracer # cat set_ftrace_filter schedule # cat trace # tracer: nop # # entries-in-buffer/entries-written: 692/68108025 #P:4 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | kworker/0:2-909 [000] .... 531.235574: schedule <-worker_thread <idle>-0 [001] .N.. 531.235575: schedule <-cpu_idle kworker/0:2-909 [000] .... 531.235597: schedule <-worker_thread sshd-2563 [001] .... 531.235647: schedule <-schedule_hrtimeout_range_clock # echo 1 > function_profile_enabled # echo 0 > function_porfile_enabled # cat set_ftrace_filter schedule # cat trace # tracer: function # # entries-in-buffer/entries-written: 159701/118821262 #P:4 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | <idle>-0 [002] ...1 604.870655: local_touch_nmi <-cpu_idle <idle>-0 [002] d..1 604.870655: enter_idle <-cpu_idle <idle>-0 [002] d..1 604.870656: atomic_notifier_call_chain <-enter_idle <idle>-0 [002] d..1 604.870656: __atomic_notifier_call_chain <-atomic_notifier_call_chain The same problem could have happened with the trace_probe_ops, but they are modified with the set_frace_filter file which does the update at closure of the file. The simple solution is to change ENABLE to UPDATE and call it every time an ftrace_ops is unregistered. Link: http://lkml.kernel.org/r/1323105776-26961-3-git-send-email-jolsa@redhat.com Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ftrace: Update filter when tracing enabled in set_ftrace_filter()Steven Rostedt2012-02-031-0/+4
| | | | | | | | | | | | | | commit 072126f4529196f71a97960248bca54fd4554c2d upstream. Currently, if set_ftrace_filter() is called when the ftrace_ops is active, the function filters will not be updated. They will only be updated when tracing is disabled and re-enabled. Update the functions immediately during set_ftrace_filter(). Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ftrace: Balance records when updating the hashSteven Rostedt2012-02-031-16/+33
| | | | | | | | | | | | | | | | | | | | | commit 41fb61c2d08107ce96a5dcb3a6289b2afd3e135c upstream. Whenever the hash of the ftrace_ops is updated, the record counts must be balance. This requires disabling the records that are set in the original hash, and then enabling the records that are set in the updated hash. Moving the update into ftrace_hash_move() removes the bug where the hash was updated but the records were not, which results in ftrace triggering a warning and disabling itself because the ftrace_ops filter is updated while the ftrace_ops was registered, and then the failure happens when the ftrace_ops is unregistered. The current code will not trigger this bug, but new code will. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tracing: fix event_subsystem ref countingIlya Dryomov2011-12-091-1/+0
| | | | | | | | | | | | | | | | | | | commit cb59974742aea24adf6637eb0c4b8e7b48bca6fb upstream. Fix a bug introduced by e9dbfae5, which prevents event_subsystem from ever being released. Ref_count was added to keep track of subsystem users, not for counting events. Subsystem is created with ref_count = 1, so there is no need to increment it for every event, we have nr_events for that. Fix this by touching ref_count only when we actually have a new user - subsystem_open(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Link: http://lkml.kernel.org/r/1320052062-7846-1-git-send-email-idryomov@gmail.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* trace_events_filter: Use rcu_assign_pointer() when setting ↵Tejun Heo2011-12-091-3/+3
| | | | | | | | | | | | | | | | | | | | | | | ftrace_event_call->filter commit d3d9acf646679c1981032b0985b386d12fccc60c upstream. ftrace_event_call->filter is sched RCU protected but didn't use rcu_assign_pointer(). Use it. TODO: Add proper __rcu annotation to call->filter and all its users. -v2: Use RCU_INIT_POINTER() for %NULL clearing as suggested by Eric. Link: http://lkml.kernel.org/r/20111123164949.GA29639@google.com Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tracing: Fix returning of duplicate data after EOF in trace_pipe_rawSteven Rostedt2011-11-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 436fc280261dcfce5af38f08b89287750dc91cd2 upstream. The trace_pipe_raw handler holds a cached page from the time the file is opened to the time it is closed. The cached page is used to handle the case of the user space buffer being smaller than what was read from the ring buffer. The left over buffer is held in the cache so that the next read will continue where the data left off. After EOF is returned (no more data in the buffer), the index of the cached page is set to zero. If a user app reads the page again after EOF, the check in the buffer will see that the cached page is less than page size and will return the cached page again. This will cause reading the trace_pipe_raw again after EOF to return duplicate data, making the output look like the time went backwards but instead data is just repeated. The fix is to not reset the index right after all data is read from the cache, but to reset it after all data is read and more data exists in the ring buffer. Reported-by: Jeremy Eder <jeder@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ftrace: Fix regression where ftrace breaks when modules are loadedSteven Rostedt2011-10-161-2/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f7bc8b61f65726ff98f52e286b28e294499d7a08 upstream. Enabling function tracer to trace all functions, then load a module and then disable function tracing will cause ftrace to fail. This can also happen by enabling function tracing on the command line: ftrace=function and during boot up, modules are loaded, then you disable function tracing with 'echo nop > current_tracer' you will trigger a bug in ftrace that will shut itself down. The reason is, the new ftrace code keeps ref counts of all ftrace_ops that are registered for tracing. When one or more ftrace_ops are registered, all the records that represent the functions that the ftrace_ops will trace have a ref count incremented. If this ref count is not zero, when the code modification runs, that function will be enabled for tracing. If the ref count is zero, that function will be disabled from tracing. To make sure the accounting was working, FTRACE_WARN_ON()s were added to updating of the ref counts. If the ref count hits its max (> 2^30 ftrace_ops added), or if the ref count goes below zero, a FTRACE_WARN_ON() is triggered which disables all modification of code. Since it is common for ftrace_ops to trace all functions in the kernel, instead of creating > 20,000 hash items for the ftrace_ops, the hash count is just set to zero, and it represents that the ftrace_ops is to trace all functions. This is where the issues arrise. If you enable function tracing to trace all functions, and then add a module, the modules function records do not get the ref count updated. When the function tracer is disabled, all function records ref counts are subtracted. Since the modules never had their ref counts incremented, they go below zero and the FTRACE_WARN_ON() is triggered. The solution to this is rather simple. When modules are loaded, and their functions are added to the the ftrace pool, look to see if any ftrace_ops are registered that trace all functions. And for those, update the ref count for the module function records. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* ftrace: Fix regression of :mod:module function enablingSteven Rostedt2011-10-162-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 43dd61c9a09bd413e837df829e6bfb42159be52a upstream. The new code that allows different utilities to pick and choose what functions they trace broke the :mod: hook that allows users to trace only functions of a particular module. The reason is that the :mod: hook bypasses the hash that is setup to allow individual users to trace their own functions and uses the global hash directly. But if the global hash has not been set up, it will cause a bug: echo '*:mod:radeon' > /sys/kernel/debug/set_ftrace_filter produces: [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip BUG: unable to handle kernel paging request at ffffffff8160ec90 IP: [<ffffffff810d9136>] add_hash_entry+0x66/0xd0 PGD 1a05067 PUD 1a09063 PMD 80000000016001e1 Oops: 0003 [#1] SMP Jul 7 04:02:28 phyllis kernel: [55303.858604] CPU 1 Modules linked in: cryptd aes_x86_64 aes_generic binfmt_misc rfcomm bnep ip6table_filter hid radeon r8169 ahci libahci mii ttm drm_kms_helper drm video i2c_algo_bit intel_agp intel_gtt Pid: 10344, comm: bash Tainted: G WC 3.0.0-rc5 #1 Dell Inc. Inspiron N5010/0YXXJJ RIP: 0010:[<ffffffff810d9136>] [<ffffffff810d9136>] add_hash_entry+0x66/0xd0 RSP: 0018:ffff88003a96bda8 EFLAGS: 00010246 RAX: ffff8801301735c0 RBX: ffffffff8160ec80 RCX: 0000000000306ee0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880137c92940 RBP: ffff88003a96bdb8 R08: ffff880137c95680 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff81c9df78 R13: ffff8801153d1000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f329c18a700(0000) GS:ffff880137c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8160ec90 CR3: 000000003002b000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process bash (pid: 10344, threadinfo ffff88003a96a000, task ffff88012fcfc470) Stack: 0000000000000fd0 00000000000000fc ffff88003a96be38 ffffffff810d92f5 ffff88011c4c4e00 ffff880000000000 000000000b69f4d0 ffffffff8160ec80 ffff8800300e6f06 0000000081130295 0000000000000282 ffff8800300e6f00 Call Trace: [<ffffffff810d92f5>] match_records+0x155/0x1b0 [<ffffffff810d940c>] ftrace_mod_callback+0xbc/0x100 [<ffffffff810dafdf>] ftrace_regex_write+0x16f/0x210 [<ffffffff810db09f>] ftrace_filter_write+0xf/0x20 [<ffffffff81166e48>] vfs_write+0xc8/0x190 [<ffffffff81167001>] sys_write+0x51/0x90 [<ffffffff815c7e02>] system_call_fastpath+0x16/0x1b Code: 48 8b 33 31 d2 48 85 f6 75 33 49 89 d4 4c 03 63 08 49 8b 14 24 48 85 d2 48 89 10 74 04 48 89 42 08 49 89 04 24 4c 89 60 08 31 d2 RIP [<ffffffff810d9136>] add_hash_entry+0x66/0xd0 RSP <ffff88003a96bda8> CR2: ffffffff8160ec90 ---[ end trace a5d031828efdd88e ]--- Reported-by: Brian Marete <marete@toshnix.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tracing: Have "enable" file use refcounts like the "filter" fileSteven Rostedt2011-08-041-9/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 40ee4dffff061399eb9358e0c8fcfbaf8de4c8fe upstream. The "enable" file for the event system can be removed when a module is unloaded and the event system only has events from that module. As the event system nr_events count goes to zero, it may be freed if its ref_count is also set to zero. Like the "filter" file, the "enable" file may be opened by a task and referenced later, after a module has been unloaded and the events for that event system have been removed. Although the "filter" file referenced the event system structure, the "enable" file only references a pointer to the event system name. Since the name is freed when the event system is removed, it is possible that an access to the "enable" file may reference a freed pointer. Update the "enable" file to use the subsystem_open() routine that the "filter" file uses, to keep a reference to the event system structure while the "enable" file is opened. Reported-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tracing: Fix bug when reading system filters on module removalSteven Rostedt2011-08-043-11/+82
| | | | | | | | | | | | | | | | | | | | | | | | | commit e9dbfae53eeb9fc3d4bb7da3df87fa9875f5da02 upstream. The event system is freed when its nr_events is set to zero. This happens when a module created an event system and then later the module is removed. Modules may share systems, so the system is allocated when it is created and freed when the modules are unloaded and all the events under the system are removed (nr_events set to zero). The problem arises when a task opened the "filter" file for the system. If the module is unloaded and it removed the last event for that system, the system structure is freed. If the task that opened the filter file accesses the "filter" file after the system has been freed, the system will access an invalid pointer. By adding a ref_count, and using it to keep track of what is using the event system, we can free it after all users are finished with the event system. Reported-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tracing: Fix regression in printk_formats fileSteven Rostedt2011-06-091-4/+1
| | | | | | | | | | | | The fix to fix the printk_formats of modules broke the printk_formats of trace_printks in the kernel. The update of what to show via the seq_file was only updated if the passed in fmt was NULL, which happens only on the first iteration. The result was showing the first format every time instead of iterating through the available formats. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* ftrace: Revert 8ab2b7efd ftrace: Remove unnecessary disabling of irqsSteven Rostedt2011-06-071-0/+7
| | | | | | | | | | | | | | | | | | | Revert the commit that removed the disabling of interrupts around the initial modifying of mcount callers to nops, and update the comment. The original comment was outdated and stated that the interrupts were being disabled to prevent kstop machine, which was required with the old ftrace daemon, but was no longer the case. What the comment failed to mention was that interrupts needed to be disabled to keep interrupts from preempting the modifying of the code and then executing the code that was partially modified. Revert the commit and update the comment. Reported-by: Richard W.M. Jones <rjones@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* kprobes/trace: Fix kprobe selftest for gcc 4.6Steven Rostedt2011-06-071-2/+6
| | | | | | | | | | | | | | | | With gcc 4.6, the self test kprobe function: kprobe_trace_selftest_target() is optimized such that kallsyms does not list it. The kprobes test uses this function to insert a probe and test it. But it will fail the test if the function is not listed in kallsyms. Adding a __used annotation keeps the symbol in the kallsyms table. Suggested-by: David Daney <ddaney@caviumnetworks.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* ftrace: Fix possible undefined return codeGuoWen Li2011-06-061-1/+1
| | | | | | | | | | kernel/trace/ftrace.c: In function 'ftrace_regex_write.clone.15': kernel/trace/ftrace.c:2743:6: warning: 'ret' may be used uninitialized in this function Signed-off-by: GuoWen Li <guowen.li.linux@gmail.com> Link: http://lkml.kernel.org/r/201106011918.47939.guowen.li.linux@gmail.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* ftrace: Add internal recursive checksSteven Rostedt2011-05-253-6/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Witold reported a reboot caused by the selftests of the dynamic function tracer. He sent me a config and I used ktest to do a config_bisect on it (as my config did not cause the crash). It pointed out that the problem config was CONFIG_PROVE_RCU. What happened was that if multiple callbacks are attached to the function tracer, we iterate a list of callbacks. Because the list is managed by synchronize_sched() and preempt_disable, the access to the pointers uses rcu_dereference_raw(). When PROVE_RCU is enabled, the rcu_dereference_raw() calls some debugging functions, which happen to be traced. The tracing of the debug function would then call rcu_dereference_raw() which would then call the debug function and then... well you get the idea. I first wrote two different patches to solve this bug. 1) add a __rcu_dereference_raw() that would not do any checks. 2) add notrace to the offending debug functions. Both of these patches worked. Talking with Paul McKenney on IRC, he suggested to add recursion detection instead. This seemed to be a better solution, so I decided to implement it. As the task_struct already has a trace_recursion to detect recursion in the ring buffer, and that has a very small number it allows, I decided to use that same variable to add flags that can detect the recursion inside the infrastructure of the function tracer. I plan to change it so that the task struct bit can be checked in mcount, but as that requires changes to all archs, I will hold that off to the next merge window. Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1306348063.1465.116.camel@gandalf.stny.rr.com Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* tracing: Add __print_symbolic_u64 to avoid warnings on 32bit machineliubo2011-05-251-0/+27
| | | | | | | | | | Filesystem, like Btrfs, has some "ULL" macros, and when these macros are passed to tracepoints'__print_symbolic(), there will be 64->32 truncate WARNINGS during compiling on 32bit box. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Link: http://lkml.kernel.org/r/4DACE6E0.7000507@cn.fujitsu.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* ftrace: Set ops->flag to enabled even on static function tracingSteven Rostedt2011-05-251-1/+5
| | | | | | | When dynamic ftrace is not configured, the ops->flags still needs to have its FTRACE_OPS_FL_ENABLED bit set in ftrace_startup(). Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* tracing: Have event with function tracer check error returnSteven Rostedt2011-05-251-1/+6
| | | | | | | | The self tests for event tracer does not check if the function tracing was successfully activated. It needs to before it continues the tests, otherwise the wrong errors may be reported. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* ftrace: Have ftrace_startup() return failure codeSteven Rostedt2011-05-251-6/+8
| | | | | | | | | The register_ftrace_function() returns an error code on failure except if the call to ftrace_startup() fails. Add a error return to ftrace_startup() if it fails to start, allowing register_ftrace_funtion() to return a proper error value. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
*-. Merge branches 'sched-core-for-linus' and 'sched-urgent-for-linus' of ↵Linus Torvalds2011-05-191-1/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits) sched: Fix and optimise calculation of the weight-inverse sched: Avoid going ahead if ->cpus_allowed is not changed sched, rt: Update rq clock when unthrottling of an otherwise idle CPU sched: Remove unused parameters from sched_fork() and wake_up_new_task() sched: Shorten the construction of the span cpu mask of sched domain sched: Wrap the 'cfs_rq->nr_spread_over' field with CONFIG_SCHED_DEBUG sched: Remove unused 'this_best_prio arg' from balance_tasks() sched: Remove noop in alloc_rt_sched_group() sched: Get rid of lock_depth sched: Remove obsolete comment from scheduler_tick() sched: Fix sched_domain iterations vs. RCU sched: Next buddy hint on sleep and preempt path sched: Make set_*_buddy() work on non-task entities sched: Remove need_migrate_task() sched: Move the second half of ttwu() to the remote cpu sched: Restructure ttwu() some more sched: Rename ttwu_post_activation() to ttwu_do_wakeup() sched: Remove rq argument from ttwu_stat() sched: Remove rq->lock from the first half of ttwu() sched: Drop rq->lock from sched_exec() ... * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix rt_rq runtime leakage bug
| * \ Merge commit 'v2.6.39-rc7' into sched/coreIngo Molnar2011-05-123-1/+3
| |\ \ | | |/
| * | sched: Get rid of lock_depthJonathan Corbet2011-04-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Neil Brown pointed out that lock_depth somehow escaped the BKL removal work. Let's get rid of it now. Note that the perf scripting utilities still have a bunch of code for dealing with common_lock_depth in tracepoints; I have left that in place in case anybody wants to use that code with older kernels. Suggested-by: Neil Brown <neilb@suse.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110422111910.456c0e84@bike.lwn.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | ftrace: Add self-tests for multiple function trace usersSteven Rostedt2011-05-183-1/+217
| | | | | | | | | | | | | | | | | | | | | Add some basic sanity tests for multiple users of the function tracer at startup. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
generated by cgit v1.1 at 2024-04-28 18:45:59 +0000